Previously autospec would not pick up save if you saved a plugin in a
symlinked path, this broke quite a few workflows
We now maintain a reverse map so we can correctly re-run specs in plugins
`Upload#url` is more likely and can change from time to time. When it
does changes, we don't want to have to look through multiple tables to
ensure that the URLs are all up to date. Instead, we simply associate
uploads properly to `UserProfile` so that it does not have to replicate
the URLs in the table.
Minor fixes to add Rails 6 support to Discourse, we now will boot
with RAILS_MASTER=1, all specs pass
Only one tiny deprecation left
Largest change was the way ActiveModel:Errors changed interface a
bit but there is a simple backwards compat way of working it
This change automatically resizes icons for various purposes. Admins can now upload `logo` and `logo_small`, and everything else will be auto-generated. Specific icons can still be uploaded separately if required.
## Core
- Adds an SiteIconManager module which manages automatic resizing and fallback
- Icons are looked up in the OptimizedImage table at runtime, and then cached in Redis. If the resized version is missing for some reason, then most icons will fall back to the original files. Some icons (e.g. PWA Manifest) will return `nil` (because an incorrectly sized icon is worse than a missing icon).
- `SiteSetting.site_large_icon_url` will return the optimized version, including any fallback. `SiteSetting.large_icon` continues to return the upload object. This means that (almost) no changes are required in core/plugins to support this new system.
- Icons are resized whenever a relevant site setting is changed, and during post-deploy migrations
## Wizard
- Allows `requiresRefresh` wizard steps to reload data via AJAX instead of a full page reload
- Add placeholders to the **icons** step of the wizard, which automatically update from the "Square Logo"
- Various copy updates to support the changes
- Remove the "upload-time" resizing for `large_icon`. This is no longer required.
## Site Settings UX
- Move logo/icon settings under a new "Branding" tab
- Various copy changes to support the changes
- Adds placeholder support to the `image-uploader` component
- Automatically reloads site settings after saving. This allows setting placeholders to change based on changes to other settings
- Upload site settings will be assigned a placeholder if SiteIconManager `responds_to?` an icon of the same name
## Dashboard Warnings
- Remove PWA icon and PWA title warnings. Both are now handled automatically.
## Bonus
- Updated the sketch logos to use @awesomerobot's new high-res designs
We had quite a few cases in core where inputs are being mutated as a side
effect of calling a method.
This handles all the cases where specs caught this.
Mutating inputs makes code harder to reason about. Eg:
```
frog = "frog"
jump(frog)
puts frog
"fly" # ?????
```
This commit is part of a followup commit that adds # frozen_string_literal
to all our specs.
Previous behaviour was to silently remove tags that
belonged to a group with a parent tag that was missing.
The "required parent tag" feature is meant to guide people
to use the correct tags and show scoped results in the tag
input field, and to help create topic lists of related
tags. It isn't meant to be a strict requirement in the
composer that should trigger errors or restrictions.
* DEV: Replace site_setting_saved DiscourseEvent with site_setting_changed
site_setting_saved is confusing for a few reasons:
- It is attached to the after_save of the ActiveRecord model. This is confusing because it only works 'properly' with the db_provider
- It passes the activerecord model as a parameter, which is confusing because you get access to the 'database' version of the setting, rather than the ruby setting. For example, booleans appear as 'y' or 'n' strings.
- When the event is called, the local process cache has not yet been updated. So if you call SiteSetting.setting_name inside the event handler, you will receive the old site setting value
I have deprecated that event, and added a new site_setting_changed event. It passes three parameters:
- Setting name (symbol)
- Old value (in ruby format)
- New value (in ruby format)
It is triggered after the setting has been persisted, and the local process cache has been updated.
This commit also includes a test case which describes the confusing behavior. This can be removed once site_setting_saved is removed.
Since Rails 5.2, the behavior of `attribute_changed?` inside `after_save` callbacks has changed, so we need to use `saved_change_to_attribute` instead. The site setting local_process_provider in test mode was covering up the issue.
If you turn it on now, default all users to approved since they were
previously. Also support approving a user that doesn't have a reviewable
record (it will be created first.)
This also includes a refactor to move class method calls to
`DiscourseEvent` into an initializer. Otherwise the load order of
classes makes a difference in the test environment and some settings
might be triggered and others not, randomly.
This new site setting determines the maximum age of unread topics in
suggested. By default if you have any unread topics older than 90 days
they will be omitted from suggested.
This change was added for 2 reasons:
1. A performance safeguard, some users tend to collect a huge amount of
read state so it becomes super expensive to find unread
2. People who collect a large amount of unread are much more interested in
recent unread topics vs ancient unread topics, this makes suggested more
relevant
Also, this is a minor speed up for tests cause 3 expensive tests became 1.
Theme developers can include any number of scss files within the /scss/ directory of a theme. These can then be imported from the main common/desktop/mobile scss.
* FIX: correctly retrieve 'login required' setting value on wizard
FEATURE: extract 'invite only' setting in a separate checkbox control
* Update invite_only checkbox locale on wizard.
Co-Authored-By: techAPJ <arpit@techapj.com>
The compress brotli functionality is no longer optional, this has worked
well for years. The name of the ENV var is also confusing cause it does
not have a `DISCOURSE_` prefix which caused issues with the web upgrader
Brotli support is now unconditionally on
Previously jobs would fail silently in test mode. Now they will raise the exception and cause the relevant test to fail. This identified a few broken tests, which I will fix in a followup commit
- Plugin developers using OpenID2.0 should migrate to OAuth2 or OIDC. OpenID2.0 APIs will be removed in v2.4.0
- For sites requiring Yahoo login, it can be implemented using the OpenID Connect plugin: https://meta.discourse.org/t/103632
For more information, see https://meta.discourse.org/t/113249
Previously we tried using a sub-query which has some terrible performance
implications, by adding 1 extra query we can eliminate the PG issue
A join to user_stats also is prone to the same slowdown
This optimisation avoids large scans joining the topics table with the
topic_users table.
Previously when a user carried a lot of read state we would have to join
the entire read state with the topics table. This operation would slow down
home page and every topic page. The more read state you accumulated the
larger the impact.
The optimisation helps people who clean up unread, however if you carry
unread from years ago it will only have minimal impact.
A new checkbox has been added to the Tags tab of the category settings modal
which is used when some tags and/or tag groups are restricted to the category,
and all other unrestricted tags should also be allowed.
Default is the same as the previous behaviour: only allow the specified set of
tags and tag groups in the category.
Previously due to #b2dc65f9534ea date on the quoted_posts table could not
be trusted.
This changes it so we use the date on the actual post as the grant date.
Note: there is an edge case where you create a post and only add a quote
a week later. In this case the badge will not be awarded at the correct
time (it will display it was granted a week ago).
That said this is far more rare than the current situation.
This functionality was never supported but before the new review queue
it didn't have any errors. Now the combination of settings is prevented
and existing sites with sso enabled will be migrated to remove invite
only.
The default ranking options ranks by the number of matches which is
highly problematic when posts are stuffed with a keyword. The ranking
will now be divided by the document length which is a much fairer way to
rank.
This commit fixes the follow quality issue with `PostSearchData#raw_data`:
1. URLs are being tokenized and links with similar href and characters
are being duplicated in the raw data.
`Post#cooked`:
```
<p><a href=\"https://meta.discourse.org/some.png\" class=\"onebox\" target=\"_blank\" rel=\"nofollow noopener\">https://meta.discourse.org/some.png</a></p>
```
`PostSearchData#raw_data` Before:
```
This is a test topic 0 Uncategorized https://meta.discourse.org/some.png discourse org/some png https://meta.discourse.org/some.png discourse org/some png
```
`PostSearchData#raw_data` After:
```
This is a test topic 0 Uncategorized https://meta.discourse.org/some.png meta discourse org
```
2. Ligthbox being included in search pollutes the
`PostSearchData#raw_data` unncessarily.
From 28 March 2018 to 28 March 2019, searches for the term `image` on
`meta.discourse.org` had a click through rate of 2.1%. Non-lightboxed images are not included in indexing for search yet we were indexing content within a lightbox. Also, search for terms like `image` was affected we were using `Pasted image` as the filename for
uploads that were pasted.
`Post#cooked`
```
<p>Let me see how I can fix this image<br>\n<div class=\"lightbox-wrapper\"><a class=\"lightbox\" href=\"https://meta.discourse.org/some.png\" title=\"some.png\" rel=\"nofollow noopener\"><img src=\"https://meta.discourse.org/some.png\" width=\"275\" height=\"299\"><div class=\"meta\">\n<svg class=\"fa d-icon d-icon-far-image svg-icon\" aria-hidden=\"true\"><use xlink:href=\"#far-image\"></use></svg><span class=\"filename\">some.png</span><span class=\"informations\">1750×2000</span><svg class=\"fa d-icon d-icon-discourse-expand svg-icon\" aria-hidden=\"true\"><use xlink:href=\"#discourse-expand\"></use></svg>\n</div></a></div></p>
```
`PostSearchData#raw_data` Before:
```
This is a test topic 0 Uncategorized Let me see how I can fix this image some.png png https://meta.discourse.org/some.png discourse org/some png some.png png 1750×2000
```
`PostSearchData#raw_data` After:
```
This is a test topic 0 Uncategorized Let me see how I can fix this image
```
In terms of indexing performance, we now have to parse the given HTML
through nokogiri twice. However performance is not a huge worry here since a string length of 194170 takes only 30ms
to scrub plus the indexing takes place in a background job.
Includes support for flags, reviewable users and queued posts, with REST API
backwards compatibility.
Co-Authored-By: romanrizzi <romanalejandro@gmail.com>
Co-Authored-By: jjaffeux <j.jaffeux@gmail.com>
Previously we would bypass touching `Topic.updated_at` for whispers and post
recovery / deletions.
This meant that certain types of caching can not be done where we rely on
this information for cache accuracy.
For example if we know we have zero unread topics as of yesterday and whisper
is made I need to bump this date so the cache remains accurate
This is only half of a larger change but provides the groundwork.
Confirmed none of our serializers leak out Topic.updated_at so this is safe
spot for this info
At the moment edits still do not change this but it is not relevant for the
unread cache.
This commit also cleans up some specs to use the new `eq_time` matcher for
millisecond fidelity comparison of times
Previously `freeze_time` would fudge this which is not that clean.
Previously we relied on the provider name matching the name of the icon. Now icon names are explicitly set. Plugin providers which do not define an icon will get the default "sign-in-alt" icon
- The test_email job is removed, because it was always being run synchronously (not in sidekiq)
- 34b29f62 added a bypass for critical emails, to match the spec. This removes the bypass, and removes the spec.
- This adapts the specs for 72ffabf6, so that they check for emails being sent
- This reimplements c2797921, allowing test emails to be sent even when emails are disabled
- s3_force_path_style was added as a Minio specific url scheme but it has never been well supported in our code base.
- Our new migrate_to_s3 rake task does not work reliably with path style urls too
- Minio has also added support for virtual style requests i.e the same scheme as AWS S3/DO Spaces so we can rely on that instead of using path style requests.
- Add migration to drop s3_force_path_style from the site_settings table
Fixes two issues:
1. Redirecting to an external origin's path after login did not work
2. User would be erroneously redirected to the external origin after logout
https://meta.discourse.org/t/109755
* improved emoji support
- always optimize images as part of the task
- use the unicode standard ordering/naming for sections
* UX: more height for when there are recently used
Migrates email user options to a new data structure, where `email_always`, `email_direct` and `email_private_messages` are replace by
* `email_messages_level`, with options: `always`, `only_when_away` and `never` (defaults to `always`)
* `email_level`, with options: `always`, `only_when_away` and `never` (defaults to `only_when_away`)
This test did not support 'no auth' use case and other auth methods except 'login'. I fixed it by simply making the call to start() in the right way.
As shown in the source code of Net::SMTP (https://github.com/ruby/ruby/blob/ruby_2_5/lib/net/smtp.rb#L452), the start() function does accept the 'user' and 'secret' arguments. Also, in do_start() function (https://github.com/ruby/ruby/blob/ruby_2_5/lib/net/smtp.rb#L542), it automatically checks the auth method and args, skips the authentication if 'user' is not provided, and selects the right auth method from 'plain', 'login' or 'cram_md5'. This is exactly all of what we should do in a connection test and the odd 'auth_login' call in the previous code makes problems.
BTW, I am using 'localhost' as the third argument, which is the same as the default value in start(). This parameter is the domain address sent along with the 'ehlo' command in SMTP protocol. I have seen some documents, e.g. https://github.com/tpn/msmtp/blob/master/doc/msmtp.1#L455, saying that 'localhost' is fine. It works for me.
