This adds a new table UserNotificationSchedules which stores monday-friday start and ends times that each user would like to receive notifications (with a Boolean enabled to remove the use of the schedule). There is then a background job that runs every day and creates do_not_disturb_timings for each user with an enabled notification schedule. The job schedules timings 2 days in advance. The job is designed so that it can be run at any point in time, and it will not create duplicate records.
When a users saves their notification schedule, the schedule processing service will run and schedule do_not_disturb_timings. If the user should be in DND due to their schedule, the user will immediately be put in DND (message bus publishes this state).
The UI for a user's notification schedule is in user -> preferences -> notifications. By default every day is 8am - 5pm when first enabled.
This should make it easier to track down how the incoming email was created, which is one of four locations:
The POP3 poller (which picks up reply via email replies)
The admin email controller #handle_mail (which is where hosted mail is sent)
The IMAP sync tool
The group SMTP mailer, which sends emails when replying to IMAP topics, pre-emptively creating IncomingEmail records to avoid double syncing
Moves the topic timer jobs from being scheduled ahead of time with enqueue_at to a 5 minute scheduled run like bookmark reminders, in a new job called Jobs::EnqueueTopicTimers. Backwards compatibility is maintained by checking if an existing topic timer job is enqueued in sidekiq for the timer, and if it is not running it inside the new job.
The functionality to close/open a topic if it is in the opposite state still remains in the after_save block of TopicTimer, with further commentary, which is used for Open/Close Temporarily.
This also removes the ensure_consistency! functionality of topic timers as it is no longer needed; the new job will always pick up the timers because they are not stored in a fragile state of sidekiq.
This adds a safe default to not process pop3 emails when the pop3 polling option is set up that are > 1 week old. This is to avoid the situation where an older mailbox is used, which causes us to go and process all emails in that mailbox, sending out error emails to the senders of emails which cannot be parsed successfully.
Feature for `Must Approve Users` setup. When a user is rejected, a staff member can optionally set a reason for audit purposes. In addition, feedback email can be sent to the user.
Meta: https://meta.discourse.org/t/account-rejection-email/103112/8
Splits the `ToggleTopicClosed` job into two distinct `OpenTopic` and `CloseTopic` jobs to make the code clearer. The old job cannot be deleted yet because of outstanding sidekiq schedules, so a todo has been added to do so later this year.
Also replaced mentions of `topic_status_update` with `topic_timer` in some files, because the `topic_status_update` model is obsolete and replaced by topic timer.
Added some shortcut methods for checking if a topic is open/whether a user can change an open topic.
* DEV: TopicTrackingState calls should happen in the background
It was observed that calling TopicTrackingState on popular topics could result in a large number of calls to redis, resulting in slow response times when posting replies.
These calls should be moved to a background job.
* DEV: PostUpdateTopicTrackingState should execute on default queue
Fixes a rare race condition causing the `Imap::Sync` class to create an incoming email and associated post/topic, which then kicks off the PostAlerter to notify others in the PM about a reply in the topic, but for the OP which is not necessary (because the person emailing the IMAP inbox already knows about the OP). Basically, we should never be sending the group SMTP email for the first post in a topic.
Also in this PR:
* Custom attribute accessors for the to/from/cc addresses on `IncomingEmail`, to parse them from an array to a joined string so the logic for this is only in one place.
* Store extra detail against the `IncomingEmail` created in `GroupSmtpMailer`
* regex test Mail header Reply-To as string instead of Field, which fixes `warning: deprecated Object#=~ is called on Mail::Field; it always returns nil`
* Add DEBUG_IMAP to log all IMAP logs as warnings for easier debugging
* Changed the Rails logging to `ImapSyncLog` in the `GroupSmtpMailer`
osts from topics with 'auto delete replies timer' with more than
skip_auto_delete_reply_likes likes will no longer be deleted. If 0,
all posts will be deleted.
My initial implementation didn't consider this case. We should skip imported users if the "imported_id" field is present, even if there're other custom fields.
This commit is dedicated to https://twitter.com/FiloSottile/status/1335666583126073354 for reminding me that like timestamps are valuable data.
Likes additionally include the topic_id and post_number of the acted post, to aid in analysis. Flag export does not include the disposition by staff.
When jobs are enqueued inside a transaction, it's possible that they will be executed before the necessary data is available in the database. This commit ensures all jobs are enqueued in an ActiveRecord after_commit hook.
One potential downside here is if the job fails to enqueue, the transaction will no longer be aborted. However, the chance of that happening is reasonably low, and the impact is significantly lower than the current issue where jobs are scheduled before their data is ready.
The `enqueue_jobs` is not correctly post-processing the post since the
post is being created inside a transaction block. This commit explicitly
enqueues the job outside transaction block.
When the linked topic is created we'll not hardcode the topic title and
let onebox work its magic instead so that the title can be updated
automatically.
- IgnoredUser records should all now have an expiring_at value. This commit enforces that in the DB, and fixes any corrupt rows
- Changes to the ignored user list are now handled by the `/u/{username}/notification_level` endpoint. This allows setting expiration dates on the ignore. This commit removes the old logic for saving a list of usernames in the user preferences.
- Many specs were calling `IgnoredUser.create`. This commit changes them to use `Fabricate(:ignored_user)` for consistency
b8c676e7 added the 'forever' option to the UI, and this is correctly stored in the database. However, we had a hard-coded limit of 4 months in the cleanup job. This commit removes the limit, so ignores can last forever.
This commit adds a site setting `auto_close_topics_create_linked_topic`
which when enabled works in conjunction with `auto_close_topics_post_count`
setting and creates a new linked topic for the topic just closed.
The auto-created new topic contains a link for all the previous topics
and the topic titles are appended with `(Part {n})`.
The setting is enabled by default.
There is a site setting reply_by_email_enabled which when combined with reply_by_email_address creates a Reply-To header in emails in the format "test+%{reply_key}@test.com" along with a PostReplyKey record, so when replying Discourse knows where to route the reply.
However this conflicts with the IMAP implementation. Since we are sending the email for a group via SMTP and from their actual email account, we want all replys to go to that email account as well so the IMAP sync job can pick them up and put them in the correct place. So if the group has IMAP enabled and configured, then the reply-to header will be correct.
This PR also makes a further fix to 64b0b50 by using the correct recipient user for the PostReplyKey record. If the post user is used we encounter this error:
if destination.user_id != user.id && !forwarded_reply_key?(destination, user)
raise ReplyUserNotMatchingError, "post_reply_key.user_id => #{destination.user_id.inspect}, user.id => #{user.id.inspect}"
end
This is because the user above is found from the from_address, but the destination which is the PostReplyKey is made by the post.user, which will be different people.
Our Email::Sender class accepts an optional user argument, which is used to create a PostReplyKey record when present. This record is used to sub out the %{reply_key} placeholder in the Reply-To mail header, so if we do not pass in the user we get a broken Reply-To header.
This is especially problematic in the IMAP group SMTP situation, because these emails go to customers that we are replying to, and when they reply to us the email bounces! This fixes the issue by passing user to the Email::Sender when sending a group_smtp email but there is still more to do in another PR.
This Email::Sender optional user is a bit of a footgun IMO, especially because most of the time we use it there is a user we can source. I would like to do another PR for this after this one to make the parameter not optional, so we don't end up with these reply issues down the line again.
Dependency on gifsicle, allow_animated_avatars and allow_animated_thumbnails
site settings were all removed. Animated GIF images are still allowed, but
the generated optimized images are no longer animated for those (which were
used for avatars and thumbnails).
The added 'animated' is populated by extracting information using FastImage.
This field was used to selectively reoptimize old animations. This process
happens in the background.
When posts or topics are deleted we don't want to immediately delete associated bookmarks, so we have a grace period to recover them and their reminders if the post or topic is un-deleted. This PR adds a task to the Weekly scheduled job to go and delete bookmarks attached to posts or topics deleted > 3 days ago.
Previously, Jobs::EnqueueDigestEmails would enqueue a digest job for every user, even if there are no topics to send. The digest job would exit, no email would send, and last_emailed_at would not change. 30 minutes later, Jobs::EnqueueDigestEmails would run again and re-enqueue jobs for the same users.
120fa8ad introduced a temporary mitigation for this issue, by randomly selecting a subset of those users each time.
This commit adds a new `digest_attempted_at` column to the `user_stats` table. This column is updated every time a digest job completes for a user. Using this, we can avoid scheduling digest jobs for the same user every 30 minutes. This also removes the random user selection in 120fa8ad, and instead prioritizes users who had digests attempted the longest time ago.
To avoid blocking the sidekiq queue a limit of 10,000 digests per 30 minutes
is introduced.
This acts as a safety measure that makes sure we don't keep pouring oil on
a fire.
On multisites it is recommended to set the number way lower so sites do not
dominate the backlog. A reasonable default for multisites may be 100-500.
This can be controlled with the environment var
DISCOURSE_MAX_DIGESTS_ENQUEUED_PER_30_MINS_PER_SITE
See https://meta.discourse.org/t/changing-a-users-email/164512 for additional context.
Previously when an admin user changed a user's email we assumed that they would need a password reset too because they likely did not have access to their account. This proved to be incorrect, as there are other reasons a user needs admin to change their email. This PR:
* Changes the admin change email for user flow so the user is sent an email to confirm the change
* We now record who the email change request was requested by
* If the requested by user is admin and not the user we note this in the email sent to the user
* We also make the confirm change email route open to anonymous users, so it can be clicked by the user even if they do not have access to their account. If there is a logged in user we make sure the confirmation matches the current user.
* FEATURE: Export the entire user profile as json, not just bio/website
* FEATURE: Add session log information to user export
Even though the columns are named 'auth_token' etc, the content is not actually usable to log into the forum with. Despite all that, it is still truncated for export, to avoid any 'token hash cracking' situations.
This PR removes the user reminder topic timers, because that system has been supplanted and improved by bookmark reminders. The option is removed from the UI and all existing user reminder topic timers are migrated to bookmark reminders.
Migration does this:
* Get all topic_timers with status_type 5 (reminders)
* Gets all bookmarks where the user ID and topic ID match
* Loops through the found topic timers
* If there is no bookmark for the OP of the topic, then we just create a bookmark with a reminder
* If there is a bookmark for the OP of the topic and it does **not** have a reminder set, then just
update it with the topic timer reminder
* If there is a bookmark for the OP of the topic with a reminder then just discard the topic timer
* Cancels all outstanding user reminder topic timers
* **Trashes (not deletes) all user reminder topic timers**
Notes:
* For now I have left the user reminder topic timer job class in place; this is so the jobs can be cancelled in the migration. It and the specs will be deleted in the next PR.
* At a later date I will write a migration to delete all trashed user topic timers. They are not deleted here in case there are data issues and they need to be recovered.
* A future PR will change the UI of the topic timer modal to make it look more like the bookmark modal.
After restoring a backup it takes up to 48 hours for uploads stored on S3 to appear in the S3 inventory. This change prevents alerts about missing uploads by preventing the EnsureS3UploadsExistence job from running in the first 48 hours after a restore. During the restore it deletes the count of missing uploads from the PluginStore, so that an alert isn't triggered by an old number.
It is possible that a user could exist without an email, if so we should
not enqueue a job to download their gravatar.
This commit resolves this error that can occur:
```
Job exception: undefined method `email' for nil:NilClass
/var/www/discourse/app/models/user.rb:1204:in `email'
/var/www/discourse/app/jobs/regular/update_gravatar.rb:12:in `execute'
```
This commit also fixes the original spec which actually was wrong. The
job never enqueued in the original spec and so the gravatar was never
actually updated and the test was checking if the two values were the
same, but they were both null and never updated, so of course they were
the same!
A new test has also been added to make sure the gravatar job isn't
enqueued when a user's email is missing.
