### Why?
Before, all flags were static. Therefore, they were stored in class variables and serialized by SiteSerializer. Recently, we added an option for admins to add their own flags or disable existing flags. Therefore, the class variable had to be dropped because it was unsafe for a multisite environment. However, it started causing performance problems.
### Solution
When a new Flag system is used, instead of using PostActionType, we can serialize Flags and use fragment cache for performance reasons.
At the same time, we are still supporting deprecated `replace_flags` API call. When it is used, we fall back to the old solution and the admin cannot add custom flags. In a couple of months, we will be able to drop that API function and clean that code properly. However, because it may still be used, redis cache was introduced to improve performance.
To test backward compatibility you can add this code to any plugin
```ruby
replace_flags do |flag_settings|
flag_settings.add(
4,
:inappropriate,
topic_type: true,
notify_type: true,
auto_action_type: true,
)
flag_settings.add(1001, :trolling, topic_type: true, notify_type: true, auto_action_type: true)
end
```
### Why?
Before, all flags were static. Therefore, they were stored in class variables and serialized by SiteSerializer. Recently, we added an option for admins to add their own flags or disable existing flags. Therefore, the class variable had to be dropped because it was unsafe for a multisite environment. However, it started causing performance problems.
### Solution
When a new Flag system is used, instead of using PostActionType, we can serialize Flags and use fragment cache for performance reasons.
At the same time, we are still supporting deprecated `replace_flags` API call. When it is used, we fall back to the old solution and the admin cannot add custom flags. In a couple of months, we will be able to drop that API function and clean that code properly. However, because it may still be used, redis cache was introduced to improve performance.
To test backward compatibility you can add this code to any plugin
```ruby
replace_flags do |flag_settings|
flag_settings.add(
4,
:inappropriate,
topic_type: true,
notify_type: true,
auto_action_type: true,
)
flag_settings.add(1001, :trolling, topic_type: true, notify_type: true, auto_action_type: true)
end
```
* FIX: Add post id to the anchor to prevent two identical anchors
We generate anchors for headings in posts. This works fine if there is
only one post in a topic with anchors. The problem comes when you have
two or more posts with the same heading. PrettyText generates anchors
based on the heading text using the raw context of each post, so it is
entirely possible to generate the same anchor for two posts in the same
topic, especially for topics with template replies
Post1:
# heading
context
Post2:
# heading
context
When both posts are on the page at the same time, the anchor will only
work for the first post, according to the [HTML specification](https://html.spec.whatwg.org/multipage/browsing-the-web.html#scroll-to-the-fragment-identifier).
> If there is an a element in the document tree whose root is document
> that has a name attribute whose value is equal to fragment, then
> return the *first* such element in tree order.
This bug is particularly serious in forums with non-Latin languages,
such as Chinese. We do not generate slugs for Chinese, which results in
the heading anchors being completely dependent on their order.
```ruby
[2] pry(main)> PrettyText.cook("# 中文")
=> "<h1><a name=\"h-1\" class=\"anchor\" href=\"#h-1\"></a>中文</h1>"
```
Therefore, the anchors in the two posts must be in exactly the same by
order, causing almost all of the anchors in the second post to be
invalid.
This commit solves this problem by adding the `post_id` to the anchor.
The new anchor generation method will add `p-{post_id}` as a prefix when
post_id is available:
```ruby
[3] pry(main)> PrettyText.cook("# 中文", post_id: 1234)
=> "<h1><a name=\"p-1234-h-1\" class=\"anchor\" href=\"#p-1234-h-1\"></a>中文</h1>"
```
This way we can ensure that each anchor name only appears once on the
same topic. Using post id also prevents the potential possibility of the
same anchor name when splitting/merging topics.
Allow admin to create custom flag which requires an additional message.
I decided to rename the old `custom_flag` into `require_message` as it is more descriptive.
Allow admin to create custom flag which requires an additional message.
I decided to rename the old `custom_flag` into `require_message` as it is more descriptive.
This commit updates `Post#each_upload_url` to reject URLs that do not
have a host which matches `Discourse.current_hostname` but follows the
`/uploads/short-url` uploads URL format. This situation most commonly
happen when users copy upload URL link between different Discourse
sites.
Ignored columns can only be dropped when its associated post-deploy
migration has been promoted to a regular migration. This is so because
Discourse doesn't rely on a schema file system to setup a brand new
database and thus the column information will be loaded by the
application first before the post-deploy migration runs.
This commit introduces a few changes as a result of
customer issues with finding why a topic was relisted.
In one case, if a user edited the OP of a topic that was
unlisted and hidden because of too many flags, the topic
would get relisted by directly changing topic.visible,
instead of going via TopicStatusUpdater.
To improve tracking we:
* Introduce a visibility_reason_id to topic which functions
in a similar way to hidden_reason_id on post, this column is
set from the various places we change topic visibility
* Fix Post#unhide! which was directly modifying topic.visible,
instead we use TopicStatusUpdater which sets visibility_reason_id
and also makes a small action post
* Show the reason topic visibility changed when hovering the
unlisted icon in topic status on topic titles
This commit addresses an issue for sites where secure_uploads
is turned on after the site has been operating without it for
some time.
When uploads are linked when they are used inside a post,
we were setting the access_control_post_id unconditionally
if it was NULL to that post ID and secure_uploads was true.
However this causes issues if an upload has been used in a
few different places, especially if a post was previously
used in a PM and marked secure, so we end up with a case of
the upload using a public post for its access control, which
causes URLs to not use the /secure-uploads/ path in the post,
breaking things like image uploads.
We should only set the access_control_post_id if the post is the first time the
upload is referenced so it cannot hijack uploads from other places.
This modifier allows plugins to alter the outcome of
`should_secure_uploads?` on a Post record, for cases when
plugins need post-attached uploads to always be secure (or
not secure) in specific scenarios.
This method name is a bit confusing; with_secure_uploads implies
it may return a block or something with the uploads of the post,
and has_secure_uploads implies that it's checking whether the post
is linked to any secure uploads.
should_secure_uploads? communicates the true intent of this method --
which is to say whether uploads attached to this post should be
secure or not.
Followup to b92993fcee
I ran out of time to get this working for that fix,
also here I am making the post.url method have parity
with post.shareUrl in JS, which omits the post number
for the first post.
When we check upload security, one of the checks is to
run `access_control_post.with_secure_uploads?`. The problem
here is that the `topic` for the post could be deleted,
which would make the check return `nil` sometimes instead
of false because of safe navigation. We just need to be
more explicit.
Followup to 2443446e62
We introduced video placeholders which prevent preloading
metadata for videos in posts. The structure looks like this
in HTML when the post is cooked:
```
<div class="video-placeholder-container" data-video-src="http://some-url.com/video.mp4" dir="ltr" style="cursor: pointer;">
<div class="video-placeholder-wrapper">
<div class="video-placeholder-overlay">
<svg class="fa d-icon d-icon-play svg-icon svg-string" xmlns="http://www.w3.org/2000/svg">
<use href="#play"></use>
</svg>
</div>
</div>
</div>
```
However, we did not update the code that links post uploads
to the post via UploadReference, so any videos uploaded since
this change are essentially dangling and liable to be deleted.
This also causes some uploads to be marked secure when they
shouldn't be, because they are not picked up and analysed in the
CookedPostProcessor flow.
* FIX: Secure upload post processing race condition
This commit fixes a couple of issues.
A little background -- when uploads are created in the composer
for posts, regardless of whether the upload will eventually be
marked secure or not, if secure_uploads is enabled we always mark
the upload secure at first. This is so the upload is by default
protected, regardless of post type (regular or PM) or category.
This was causing issues in some rare occasions though because
of the order of operations of our post creation and processing
pipeline. When creating a post, we enqueue a sidekiq job to
post-process the post which does various things including
converting images to lightboxes. We were also enqueuing a job
to update the secure status for all uploads in that post.
Sometimes the secure status job would run before the post process
job, marking uploads as _not secure_ in the background and changing
their ACL before the post processor ran, which meant the users
would see a broken image in their posts. This commit fixes that issue
by always running the upload security changes inline _within_ the
cooked_post_processor job.
The other issue was that the lightbox wrapper link for images in
the post would end up with a URL like this:
```
href="/secure-uploads/original/2X/4/4e1f00a40b6c952198bbdacae383ba77932fc542.jpeg"
```
Since we weren't actually using the `upload.url` to pass to
`UrlHelper.cook_url` here, we weren't converting this href to the CDN
URL if the post was not in a secure context (the UrlHelper does not
know how to convert a secure-uploads URL to a CDN one). Now we
always end up with the correct lightbox href. This was less of an issue
than the other one, since the secure-uploads URL works even when the
upload has become non-secure, but it was a good inconsistency to fix
anyway.
When a user creates or edits a post, we already were updating
the security of uploads in the post based on site settings and
their access control post, which is important since these uploads
may be switched from secure/not secure based on configuration.
The `with_secure_uploads?` method on a post is used to determine
whether to use the secure-uploads URL for all uploads in the post,
regardless of their individual security, so if this is false and
some of the posts are still secure when rebaking, we end up with
broken URLs.
This commit just makes it so rebaking via the UI also re-evaluates
upload security so that when the post is loaded again after processing,
all of the uploads have the correct security.
This adds a new secure_uploads_pm_only site setting. When secure_uploads
is true with this setting, only uploads created in PMs will be marked
secure; no uploads in secure categories will be marked as secure, and
the login_required site setting has no bearing on upload security
either.
This is meant to be a stopgap solution to prevent secure uploads
in a single place (private messages) for sensitive admin data exports.
Ideally we would want a more comprehensive way of saying that certain
upload types get secured which is a hybrid/mixed mode secure uploads,
but for now this will do the trick.
When hiding a post (essentially updating hidden, hidden_at, and hidden_reason_id) our callbacks are running the whole battery of post validations. This can cause the hiding to fail in a number of edge cases. The issue is similar to the one fixed in #11680, but applies to all post validations, none of which should apply when hiding a post.
After some code reading and discussion, none of the validations in PostValidator seem to be relevant when hiding posts, so instead of just skipping unique check, we skip all post validator checks.
Why this change?
In `PostDestroyer#make_previous_post_the_last_one` and
`Topic.reset_highest`, we have a query that looks something like this:
```
SELECT user_id FROM posts
WHERE topic_id = :topic_id AND
deleted_at IS NULL AND
post_type <> 4
#{post_type}
ORDER BY created_at desc
LIMIT 1
```
However, we currently don't have an index that caters directly to this
query. As a result, we have seen this query performing poorly on large
sites if the PG planner ends up using an index that is suboptimal for
the query.
This commit adds an index to the `posts` table on `topic_id` and then
`created_at`. For the query above, PG will be able to do a backwards
index scan efficiently.
Updates the interface for implementing summarization strategies and adds a cache layer to summarize topics once.
The cache stores the final summary and each chunk used to build it, which will be useful when we have to extend or rebuild it.
* FIX: Video thumbnails can have duplicates
It's possible that a duplicate video or even a very similar video could
generate the same video thumbnail. Because video thumbnails are mapped
to their corresponding video by using the video sha1 in the thumbnail
filename we need to allow for duplicate thumbnails otherwise even when a
thumbnail has been generated for a topic it will not be mapped
correctly.
This will also allow you to re-upload a video on the same topic to
regenerate the thumbnail.
* fix typo
* FIX: Do not overwrite existing thumbnails
When auto generating video thumbnails they should not overwrite any
existing topic thumbnails.
This also addresses an issue with capitalized file extensions like .MOV
that were being excluded.
* Update app/models/post.rb
Remove comment
Co-authored-by: Penar Musaraj <pmusaraj@gmail.com>
---------
Co-authored-by: Penar Musaraj <pmusaraj@gmail.com>
Responding to negative behaviour tends to solicit more of the same. Common wisdom states: "don't feed the trolls".
This change codifies that advice by introducing a new nudge when hitting the reply button on a flagged post. It will be shown if either the current user, or two other users (configurable via a site setting) have flagged the post.
* FEATURE: Generate thumbnail images for uploaded videos
Topics in Discourse have a topic thumbnail feature which allows themes
to show a preview image before viewing the actual Topic.
This PR allows for the ability to generate a thumbnail image from an
uploaded video that can be use for the topic preview.
We call `post.update_uploads_secure_status` in both
`PostCreator` and `PostRevisor`. Only the former was checking
if `SiteSetting.secure_uploads?` was enabled, but the latter
was not. There is no need to enqueue the job
`UpdatePostUploadsSecureStatus` if secure_uploads is not
enabled for the site.
The #pluck_first freedom patch, first introduced by @danielwaterworth has served us well, and is used widely throughout both core and plugins. It seems to have been a common enough use case that Rails 6 introduced it's own method #pick with the exact same implementation. This allows us to retire the freedom patch and switch over to the built-in ActiveRecord method.
There is no replacement for #pluck_first!, but a quick search shows we are using this in a very limited capacity, and in some cases incorrectly (by assuming a nil return rather than an exception), which can quite easily be replaced with #pick plus some extra handling.
Currently we don’t have an association between reviewables and posts.
This sometimes leads to inconsistencies in the DB as a post can have
been deleted but an associated reviewable is still present.
This patch addresses this issue simply by adding a new association to
the `Post` model and by using the `dependent: :destroy` option.
Note that we don't have a database table and a model for post mentions yet, and I decided to implement it without adding one to avoid heavy data migrations. Still, we may want to add such a model later, that would be convenient, we have such a model for mentions in chat.
Note that status appears on all mentions on all posts in a topic except of the case when you just posted a new post, and it appeared on the bottom of the topic. On such posts, status won't be shown immediately for now (you'll need to reload the page to see the status). I'll take care of it in one of the following PRs.
This commit fleshes out and adds functionality for the new `#hashtag` search and
lookup system, still hidden behind the `enable_experimental_hashtag_autocomplete`
feature flag.
**Serverside**
We have two plugin API registration methods that are used to define data sources
(`register_hashtag_data_source`) and hashtag result type priorities depending on
the context (`register_hashtag_type_in_context`). Reading the comments in plugin.rb
should make it clear what these are doing. Reading the `HashtagAutocompleteService`
in full will likely help a lot as well.
Each data source is responsible for providing its own **lookup** and **search**
method that returns hashtag results based on the arguments provided. For example,
the category hashtag data source has to take into account parent categories and
how they relate, and each data source has to define their own icon to use for the
hashtag, and so on.
The `Site` serializer has two new attributes that source data from `HashtagAutocompleteService`.
There is `hashtag_icons` that is just a simple array of all the different icons that
can be used for allowlisting in our markdown pipeline, and there is `hashtag_context_configurations`
that is used to store the type priority orders for each registered context.
When sending emails, we cannot render the SVG icons for hashtags, so
we need to change the HTML hashtags to the normal `#hashtag` text.
**Markdown**
The `hashtag-autocomplete.js` file is where I have added the new `hashtag-autocomplete`
markdown rule, and like all of our rules this is used to cook the raw text on both the clientside
and on the serverside using MiniRacer. Only on the server side do we actually reach out to
the database with the `hashtagLookup` function, on the clientside we just render a plainer
version of the hashtag HTML. Only in the composer preview do we do further lookups based
on this.
This rule is the first one (that I can find) that uses the `currentUser` based on a passed
in `user_id` for guardian checks in markdown rendering code. This is the `last_editor_id`
for both the post and chat message. In some cases we need to cook without a user present,
so the `Discourse.system_user` is used in this case.
**Chat Channels**
This also contains the changes required for chat so that chat channels can be used
as a data source for hashtag searches and lookups. This data source will only be
used when `enable_experimental_hashtag_autocomplete` is `true`, so we don't have
to worry about channel results suddenly turning up.
------
**Known Rough Edges**
- Onebox excerpts will not render the icon svg/use tags, I plan to address that in a follow up PR
- Selecting a hashtag + pressing the Quote button will result in weird behaviour, I plan to address that in a follow up PR
- Mixed hashtag contexts for hashtags without a type suffix will not work correctly, e.g. #ux which is both a category and a channel slug will resolve to a category when used inside a post or within a [chat] transcript in that post. Users can get around this manually by adding the correct suffix, for example ::channel. We may get to this at some point in future
- Icons will not show for the hashtags in emails since SVG support is so terrible in email (this is not likely to be resolved, but still noting for posterity)
- Additional refinements and review fixes wil
This commit renames all secure_media related settings to secure_uploads_* along with the associated functionality.
This is being done because "media" does not really cover it, we aren't just doing this for images and videos etc. but for all uploads in the site.
Additionally, in future we want to secure more types of uploads, and enable a kind of "mixed mode" where some uploads are secure and some are not, so keeping media in the name is just confusing.
This also keeps compatibility with the `secure-media-uploads` path, and changes new
secure URLs to be `secure-uploads`.
Deprecated settings:
* secure_media -> secure_uploads
* secure_media_allow_embed_images_in_emails -> secure_uploads_allow_embed_images_in_emails
* secure_media_max_email_embed_image_size_kb -> secure_uploads_max_email_embed_image_size_kb
See https://meta.discourse.org/t/discourse-email-messages-are-incorrectly-threaded/233499
for thorough reasoning.
This commit changes how we generate Message-IDs and do email
threading for emails sent from Discourse. The main changes are
as follows:
* Introduce an outbound_message_id column on Post that
is either a) filled with a Discourse-generated Message-ID
the first time that post is used for an outbound email
or b) filled with an original Message-ID from an external
mail client or service if the post was created from an
incoming email.
* Change Discourse-generated Message-IDs to be more consistent
and static, in the format `discourse/post/:post_id@:host`
* Do not send References or In-Reply-To headers for emails sent
for the OP of topics.
* Make sure that In-Reply-To is filled with either a) the OP's
Message-ID if the post is not a direct reply or b) the parent
post's Message-ID
* Make sure that In-Reply-To has all referenced post's Message-IDs
* Make sure that References is filled with a chain of Message-IDs
from the OP down to the parent post of the new post.
We also are keeping X-Discourse-Post-Id and X-Discourse-Topic-Id,
headers that we previously removed, for easier visual debugging
of outbound emails.
Finally, we backfill the `outbound_message_id` for posts that have
a linked `IncomingEmail` record, using the `message_id` of that record.
We do not need to do that for posts that don't have an incoming email
since they are backfilled at runtime if `outbound_message_id` is missing.
