The modified test used to be the same as the test above. The bad test
was introduced in commit 77d4c4d8dc,
during a refactoring.
This was not a serious problem because the same behavior was still
tested partially by the other tests below.
We add `Access-Control-Allow-Origin: *` to all asset requests which are requested via a configured CDN. This is particularly important now that we're using browser-native `import()` to load the highlightjs bundle. Unfortunately, user-configurable 'cors_origins' site setting was overriding the wldcard value on CDN assets and causing CORS errors.
This commit updates the logic to give the `*` value precedence, and adds a spec for the situation. It also invalidates the cache of hljs assets (because CDNs will have cached the bad Access-Control-Allow-Origin header).
The rack-cors middleware is also slightly tweaked so that it is always inserted. This makes things easier to test and more consistent.
Why was the problem?
ActiveRecord's query cache for the connection pool wasn't disabled after the
`with a fake provider runs 'other_phase' for enabled auth methods` test
in `omniauth_callbacks_controller_spec.rb` was run. This was because the
Rack response body in `FakeAuthenticator::Strategy::other_phase` did not
adhere to the expected Rack body format which is "typically an Array of
String instances". Because this expectation was broken, it cascaded the
problem down where it resulted in the ActiveRecord's query cache for the
connection pool not being disabled as it normally should when the
response body is closed.
When the query cache is left enabled, common assertions pattern in RSpec
like `expect { something }.to change { Group.count }` will fail since
the query cache is enabled and the call first call to `Group.count` will
cache the result to be reused later on.
To see the bug in action, one can run the following command:
`bundle exec rspec --seed 44747
spec/requests/omniauth_callbacks_controller_spec.rb:1150
spec/models/group_spec.rb:283`
The category drop was rerendered after every category async change
because it updated the categories list. This is not necessary and
categories can be referenced indirectly by ID instead.
This value is included when generating static asset URLs. Updating the value will allow site operators to invalidate all asset urls to recover from configuration issues which may have been cached by CDNs/browsers.
Why this change?
In the `invites_controller_spec.rb` file, we had several tests that were
checking for assets path in the response's body to determine which
layout has been rendered. However, those test fails if `bin/ember-cli
--build` has been run locally.
What does this change do?
Instead of checking for asset paths to determine the layout that has
been rendered, this change relies on the fact that the `no_ember` layout
has a `no-ember` class on the `body` element. This is more deterministic
as compared to relying on the different asset paths that are rendered in
the response.
This improves the implementation of #18993
1. Error message displayed to user is clearer
2. open_db will also be called, even if license key is blank, as it was previously
3. This in turn means no need to keep stubbing 'maxmind_license_key'
The parent category needs to be serialized before the child category
because they are parsed in order. Otherwise the client will not build
the parent-child relationship correctly.
This change converts the `approve_unless_trust_level` site setting to
`approve_unless_allowed_groups`.
See: https://meta.discourse.org/t/283408
- Adds the new site setting
- Adds a deprecation warning
- Updates core to use the new settings.
- Adds a migration to fill in the new setting of the old setting was
changed
- Adds an entry to the site_setting.keywords section
- Updates many tests to account for the new change
After a couple of months we will remove the `approve_unless_trust_level`
setting entirely.
Internal ref: /t/115696
Currently to use a limit in the notifications index, you have to also pass recent: true as a param.
This PR:
Adds optional limit param to be used in the notifications query, regardless of the presence of recent
Raises the max limit of the response with recent present from 50 -> 60. It is super weird we have a hard-limit of 50 before with recent param, and 60 without the param.
We ask users to confirm their session if they are making a sensitive
action, such as adding/updating second factors or passkeys. This
commit adds the ability to confirm sessions with passkeys as an option
to the password confirmation.
The `src` of js files is now dependent on the ember-cli/webpack build, so it's not a good thing to check in specs. In CI it passes because the ember-cli build is not run. But locally it would fail if you had a build in `app/assets/javascripts/discourse/dist`.
This commit updates the specs to check for the presence of a stable data attribute instead.
Previously, the app HTML served by the Ember-CLI proxy was generated based on a 'bootstrap json' payload generated by Rails. This inevitably leads to differences between the Rails HTML and the Ember-CLI HTML.
This commit overhauls our proxying strategy. Now, we totally ignore the ember-cli `index.html` file. Instead, we take the full HTML from Rails and surgically replace script URLs based on a `data-discourse-entrypoint` attribute. This should be faster (only one request to Rails), more robust, and less confusing for developers.
The most common thing that we do with fab! is:
fab!(:thing) { Fabricate(:thing) }
This commit adds a shorthand for this which is just simply:
fab!(:thing)
i.e. If you omit the block, then, by default, you'll get a `Fabricate`d object using the fabricator of the same name.
This adds the ability to collect stats without exposing them
among other stats via API.
The most important thing I wanted to achieve is to provide
an API where stats are not exposed by default, and a developer
has to explicitly specify that they should be
exposed (`expose_via_api: true`). Implementing an opposite
solution would be simpler, but that's less safe in terms of
potential security issues.
When working on this, I had to refactor the current solution.
I would go even further with the refactoring, but the next steps
seem to be going too far in changing the solution we have,
and that would also take more time. Two things that can be
improved in the future:
1. Data structures for holding stats can be further improved
2. Core stats are hard-coded in the About template (it's hard
to fix it without correcting data structures first, see point 1):
63a0700d45/app/views/about/index.html.erb (L61-L101)
The most significant refactorings are:
1. Introducing the `Stat` model
2. Aligning the way the core and the plugin stats' are registered
There is an edge case where the following occurs:
1. The user sets a bookmark reminder on a post/topic
2. The post/topic is changed to a PM before or after the reminder
fires, and the notification remains unread by the user
3. The user opens their bookmark reminder notification list
and they can still see the notification even though they cannot
access the topic anymore
There is a very low chance for information leaking here, since
the only thing that could be exposed is the topic title if it
changes to something sensitive.
This commit filters the bookmark unread notifications by using
the bookmarkable can_see? methods and also prevents sending
reminder notifications for bookmarks the user can no longer see.
Switches to using a dialog to confirm a session (i.e. sudo mode for
account changes where we want to be extra sure the current user is who
they say they are) to match what we do with passkeys.
This commit adds an `enable_s3_transfer_acceleration` site setting,
which is hidden to begin with. We are adding this because in certain
regions, using https://aws.amazon.com/s3/transfer-acceleration/ can
drastically speed up uploads, sometimes as much as 70% in certain
regions depending on the target bucket region. This is important for
us because we have direct S3 multipart uploads enabled everywhere
on our hosting.
To start, we only want this on the uploads bucket, not the backup one.
Also, this will accelerate both uploads **and** downloads, depending
on whether a presigned URL is used for downloading. This is the case
when secure uploads is enabled, not anywhere else at this time. To
enable the S3 acceleration on downloads more generally would be a
more in-depth change, since we currently store S3 Upload record URLs
like this:
```
url: "//test.s3.dualstack.us-east-2.amazonaws.com/original/2X/6/123456.png"
```
For acceleration, `s3.dualstack` would need to be changed to `s3-accelerate.dualstack`
here.
Note that for this to have any effect, Transfer Acceleration must be enabled
on the S3 bucket used for uploads per https://docs.aws.amazon.com/AmazonS3/latest/userguide/transfer-acceleration-examples.html.
When Discourse first introduced brotli support, reverse-proxy/CDN support for passing through the accept-encoding header to our NGINX server was very poor. Therefore, a separate `/brotli_assets/...` path was introduced to serve the brotli assets. This worked well, but introduces additional complexity and inconsistencies.
Nowadays, Brotli encoding is well supported, so we don't need the separate paths any more. Requests can be routed to the asset `.js` URLs, and NGINX will serve the brotli/gzip version of the asset automatically.
This commit introduces a new feature that allows theme developers to manage the transformation of theme settings over time. Similar to Rails migrations, the theme settings migration system enables developers to write and execute migrations for theme settings, ensuring a smooth transition when changes are required in the format or structure of setting values.
Example use cases for the theme settings migration system:
1. Renaming a theme setting.
2. Changing the data type of a theme setting (e.g., transforming a string setting containing comma-separated values into a proper list setting).
3. Altering the format of data stored in a theme setting.
All of these use cases and more are now possible while preserving theme setting values for sites that have already modified their theme settings.
Usage:
1. Create a top-level directory called `migrations` in your theme/component, and then within the `migrations` directory create another directory called `settings`.
2. Inside the `migrations/settings` directory, create a JavaScript file using the format `XXXX-some-name.js`, where `XXXX` is a unique 4-digit number, and `some-name` is a descriptor of your choice that describes the migration.
3. Within the JavaScript file, define and export (as the default) a function called `migrate`. This function will receive a `Map` object and must also return a `Map` object (it's acceptable to return the same `Map` object that the function received).
4. The `Map` object received by the `migrate` function will include settings that have been overridden or changed by site administrators. Settings that have never been changed from the default will not be included.
5. The keys and values contained in the `Map` object that the `migrate` function returns will replace all the currently changed settings of the theme.
6. Migrations are executed in numerical order based on the XXXX segment in the migration filenames. For instance, `0001-some-migration.js` will be executed before `0002-another-migration.js`.
Here's a complete example migration script that renames a setting from `setting_with_old_name` to `setting_with_new_name`:
```js
// File name: 0001-rename-setting.js
export default function migrate(settings) {
if (settings.has("setting_with_old_name")) {
settings.set("setting_with_new_name", settings.get("setting_with_old_name"));
}
return settings;
}
```
Internal topic: t/109980
Two changes were introduced:
1. Reorder links on sidebar section is removed. Clicking and holding the mouse for 250ms was unintuitive;
2. Fixed bugs when reorder is done in edit modal.
As part of #23816, which sought to strip out thousand separators, we also accidentally strip out signs. This is making it impossible to disable some settings which require a -1 to disable. Instead of stripping non-digits, strip anything that isn't a sign or a digit.
The User#flag_level column has not been in use for a very long time. The "new" reviewable system dynamically calculates flag scores based on past performance of the user.
This PR removes flag_level from the admin user serializer (since it isn't displayed anywhere in admin user lists) and marks the column as deprecated and targeted for removal in the next minor version.
Calling add_to_serializer is an irreversible operation which affects all the following tests in the suite. This lead to other tests failing because they weren't expecting the extra field on the category serializer.
Followup to 2a75656ff2
Previously, we would build the stack of omniauth authenticators once on boot. That meant that all strategies had to be included, even if they were disabled. We then used the `before_request_phase` to ensure disabled strategies could not be used. This works well, but it means that omniauth is often doing unnecessary work running logic in disabled strategies.
This commit refactors things so that we build the stack of strategies on each request. That means we only need to include the enabled strategies in the stack - disabled strategies are totally ignored. Building the stack on-demand like this does add some overhead to auth requests, but on the majority of sites that will be significantly outweighed by the fact we're now skipping logic for disabled authenticators.
As well as the slight performance improvement, this new approach means that:
- Broken (i.e. exception-raising) strategies cannot cause issues on a site if they're disabled
- `other_phase` of disabled strategies will never appear in the backtrace of other authentication errors
No plugins or themes rely on anonymous_posting_min_trust_level so we
can just switch straight over to anonymous_posting_allowed_groups
This also adds an AUTO_GROUPS const which can be imported in JS
tests which is analogous to the one defined in group.rb. This can be used
to set the current user's groups where JS tests call for checking these groups
against site settings.
Finally a AtLeastOneGroupValidator validator is added for group_list site
settings which ensures that at least one group is always selected, since if
you want to allow all users to use a feature in this way you can just use
the everyone group.
There are a few PUT requests that users can do in their preferences tab that aren't going through the standard `user#update` action.
This commit adds all the "trivial" ones (aka. except the security-related one, username and email changes) so you can now change the badge title, the avatar or featured topic of a user via the API.
Why this change?
When the URL `/t/1234?preview_theme_id=21` is loaded, we redirect to
`/t/<topic slug>/1234` stripping the `preview_theme_id` query params.
What does this change do?
This change builds on 61248652cd and
simply adds the `preview_theme_id` query param when redirecting.
