I am changing many of these to notes or resolving them as is,
most of these I have not actively worked on in years so someone
else can work on them when we get to these areas again.
This commit continues work laid out by ffec8163b0 for the admin config page for the /about page. The last commit set up the user interface, and this one sets up all the wiring needed to make the input fields and save buttons actually work.
Internal topic: t/128544.
While creating a new category if the user didn't specify a value for `minimum_required_tags` input but clicked it then it returned the "PG::NotNullViolation: null value in column 'minimum_required_tags'" error.
When visiting a user profile, and then opening the search, there's an option to filter down by posts made by that user.
When clicking that option, it used to pre-fill the "search bar" with "@<username>" to filter down the search.
This restore this behaviour and add a system spec to ensure it doesn't regress.
Context - https://meta.discourse.org/t/in-posts-by-search-option-does-not-work-when-clicked/312916
We want to allow admins to make new required fields apply to existing users. In order for this to work we need to have a way to make those users fill up the fields on their next page load. This is very similar to how adding a 2FA requirement post-fact works. Users will be redirected to a page where they can fill up the remaining required fields, and until they do that they won't be able to do anything else.
Many site settings can be distructive or have huge side-effects
for a site that the admin may not be aware of when changing it.
This commit introduces a `requires_confirmation` attribute that
can be added to any site setting. When it is true, a confirmation
dialog will open if that setting is changed in the admin UI,
optionally with a custom message that is defined in client.en.yml.
If the admin does not confirm, we reset the setting to its previous
clean value and do not save the new value.
When we turn on settings automatically for customers,
we sometimes use `.set_and_log` which will make a staff
action log for the site setting change. This is fine, but
there is no context for customers.
This change allows setting a message with `.set_and_log`, which
will be stored in the `details` column of the staff action log
created, which will show up on `/admin/logs/staff_action_logs`
---------
Co-authored-by: Kelv <kelv@discourse.org>
* FEATURE: Add Filter for Webhook Events by Status
* Fixing multiple issues
* Lint
* Fixing multiple issues
* Change the range of the status for webhook events
This commit fixes a problem where the user will not be able to reset
their password when they only have security keys and backup codes
configured.
This commit also makes the following changes/fixes:
1. Splits password reset system tests to
`spec/system/forgot_password_spec.rb` instead of missing the system
tests in `spec/system/login_spec.rb` which is mainly used to test
the login flow.
2. Fixes a UX issue where the `Use backup codes` or `Use authenticator
app` text is shown on the reset password form when the user does
not have either backup codes or an authenticator app configured.
Continued work on moderate flags UI.
In this PR admins are allowed to change the order of flags. The notify user flag is always on top but all other flags can be moved.
We're planning to implement a feature that allows adding required fields for existing users. This PR does some preparatory refactoring to make that possible. There should be no changes to existing behaviour. Just a small update to the admin UI.
(experimental)
The initial implementation of glimmer topic-list and related components. Does not include new APIs and isn't compatible with existing customization. That's gonna come in future PRs.
Enabled by adding groups to `experimental_glimmer_topic_list_groups` setting.
Followup to 67a8080e33
This commit makes it so the topic footer button for bookmarks
uses the new BookmarkMenu component, and makes some tweaks to
that component to allow for a label and CSS class options.
Also introduces a TopicBookmarkManager to manage the saving/editing/
deleting of the topic level bookmarks and the reactivity that happens
in the topic UI afterward.
Next commit should rip out old bookmark associated code in the
topic controller as it will no longer be needed.
---------
Co-authored-by: Joffrey JAFFEUX <j.jaffeux@gmail.com>
To add a components link to the sidebar refactoring was required to create unique URLs for themes and components. Before the query param was used. After changes, we have two URLs `/admin/customize/themes` and `/admin/customize/components`.
This commit will now change two behaviors:
- If composer is already opened on a specific post and we click on edit again for the same post, we will do nothing and not show the discard draft modal
- if composer is shrinked and we click on edit for the same currently edited post, we will just open the composer and not show the discard draft modal
When choosing the "Custom..." option in the new bookmark
menu and then choosing a date + time in the modal for the
reminder, the bookmark icon on the post was not updating to
show the one with the clock to indicate the reminder.
This was just a data syncing issue between BookmarkFormData
and what the modal sets. Ideally all this would be refactored
because the data flow is messy...but hard to find time for
that right now.
Followup 67a8080e33
Adds the new quick menu for bookmarking. When you bookmark
a post (chat message behaviour will come later) we show this new quick
menu and bookmark the item straight away.
You can then choose a reminder quick option, or choose Custom... to open
the old modal. If you click on an existing bookmark, we show the same quick menu
but with Edit and Delete options.
A later PR will introduce a new bookmark modal, but for now we
are using the old modal for Edit and Custom... options.
Why this change?
Before this change, the validation error message shown to the user when
saving a theme objects setting is very cryptic. This commit changes the
validation error messages to be displayed on top of the editor instead.
Note that I don't think this way of displaying is the ideal state we
want to get to but given the time we have this will do for now.
Why this change?
In cdba864598, we added support for adding
a description which will be displayed under the input of each property
on the client side.
Currently this convention in the locale file is followed:
```
en:
theme_metadata:
settings:
objects_setting:
description: <description> for the setting
schema:
properties:
name: <description for the name property>
links:
name: <description for the name property in link>
url: <description for the url property in link>
```
Since we now want to allow the label to be translated as well, we will
be changing the convention to the following:
```
en:
theme_metadata:
settings:
objects_setting:
description: <description> for the setting
schema:
properties:
name:
label: <label for the name property>
description: <description for the name property>
links:
name:
label: <label for the name property>
description: <description for the name property in link>
url:
label: <label for the url property>
description: <description for the url property in link>
```
If the locale file does not provide a `label` key under the property's
name, the client side will just display the property's name as the
label for the input field.
Why this change?
Previously, we were preloading the necessary metadata for
`adminCustomizeThemes.show.schema` route in the
`adminCustomizeThemes.show` route. This is wasteful because we're
loading data upfront when the objects setting editor may not be used.
This change also lays the ground work for a future commit where we need
to be shipping down additional metadata which may further add to the
payload.
Why this change?
In our schema, we support the `min_length` and `max_length` validation
rules like so:
```
some_objects_setting
type: objects
schema:
name: some_object
properties:
title:
type: string
validations:
min_length: 1
max_length: 10
```
While the validations used to validate the objects on the server side,
we should also add client side validation for better UX.
Why this change?
This is a first pass at styling the editor for creating/editing/updating
an objects typed theme setting. Only the desktop view is being
considered at the current moment.
The objects typed theme setting is still behind a feature flag at this moment so there is no need for us to get the styling perfect. The purpose of this PR is to get us to a state which we can quickly iterate with a designer on.
This commit makes it so the site settings filter controls and
the list of settings input editors themselves can be used elsewhere
in the admin UI outside of /admin/site_settings
This allows us to provide more targeted groups of settings in different
UI areas where it makes sense to provide them, such as on plugin pages.
You could open a single page for a plugin where you can see information
about that plugin, change settings, and configure it with custom UIs
in the one place.
In future we will do this in "config areas" for other parts of the
admin UI.
Why this change?
When editing a objects typed theme setting, the input fields which are
rendered should include a description so that the user knows the purpose
of the field which they are changing.
What does this change do?
This change adds support for adding description to each property in the
schema for an object by following a given convention in the locale file.
For a schema like this:
```
objects_setting:
type: objects
schema:
name: section
properties:
name:
type: string
required: true
links:
type: objects
schema:
name: link
properties:
name:
type: string
required: true
validations:
max_length: 20
url:
type: string
```
Description for each property in the object can be added like so:
```
en:
theme_metadata:
settings:
objects_setting:
description: <description> for the setting
schema:
properties:
name: <description for the name property>
links:
name: <description for the name property in link>
url: <description for the url property in link>
```
If the a description is not present, the input field will simply not
have an description.
Also note that a description for a theme setting can now be added like
so:
```
en:
theme_metadata:
settings:
some_other_setting: <This will be used as the description>
objects_setting:
description: <This will also be used as the description>
```
Why this change?
Prior to this change, there is no description being displayed for
objects typed theme setting because we were rendering a button instead
of the components for the various setting types which will render the
setting's description.
What does this change do?
1. Introduce `SiteSettings::Description` compoment to centralise the HTML
being rendered across all settings component.
2. Renders the `SiteSettings::Description` component after the edit
button in `site_setting.hbs`.
Why this change?
On the `/admin/customize/themes/<:id>` route, we allow admins to edit
all settings via a settings editor. Prior to this change, trying to edit
and save a typed objects theme settings will result in an error on the
server.
This change creates a user setting that they can toggle if
they don't want to receive unread notifications when someone closes a
topic they have read and are watching/tracking it.
Why this change?
The `/admin/customize/themes/:id/schema/name` route is a work in
progress but we want to be able to start navigating to it from the
`/admin/customize/themes/:id` route.
What does this change do?
1. Move `adminCustomizeThemes.schema` to a child route of
`adminCustomizeThemes.show`. This is because we need the model
from the parent route and if it isn't a child route we end up
having to load the theme model again from the server.
1. Add the `objects_schema` attribute to `ThemeSettingsSerializer`
1. Refactor `SiteSettingComponent` to be able to render a button
so that we don't have to hardcode the button rendering into the
`SiteSettings::String` component
Why this change?
`current_url` does not rely on Capybara waiters so opt to use
`have_current_path` matcher instead. Also assert for email against
element displayed on the page instead of querying the database for it
which isn't really what system tests are meant for.
* FIX: respect creation date when paginating group activity posts
There are scenarios where the chronological order of posts doesn't match the order of their IDs. For instance, when moving the first post from one topic or PM to another, a new post (with a higher ID) will be created, but it will retain the original creation time.
This PR changes the group activity page and endpoint to paginate posts using created_at instead of relying on ID ordering.
Merges the design experiment at
https://meta.discourse.org/t/post-quote-copy-to-clipboard-button-feedback/285376
into core.
This adds a new button by default to the menu that pops up when text is
selected in a post.
The normal Quote button that is shown when selecting text within a post
will open the composer with the quote markdown prefilled.
This new "Copy Quote" button copies the quote markdown directly to the
user’s clipboard. This is useful for when you want to copy the quote
elsewhere – to another topic or a chat message for instance – without
having to manually copy from the opened composer, which then has to be
dismissed afterwards. An example of quote markdown:
```
[quote="someuser, post:7, topic:285376"]
In this moment, I am euphoric.
[/quote]
```
Switches to using a dialog to confirm a session (i.e. sudo mode for
account changes where we want to be extra sure the current user is who
they say they are) to match what we do with passkeys.
This commit fixes an issue where clicking the default
"Take Action" option on a flag for a post doesn't always
end up with the post hidden.
This is because the "take_action" score bonus doesn’t take into account
the final score required to hide the post.
Especially with the `hide_post_sensitivity` site setting set to `low`
sensitivity, there is a likelihood the score needed to hide the post
won’t be reached.
Now, the default "Take Action" button has been changed to "Hide Post"
to reflect what is actually happening and the description has been
improved, and if "Take Action" is clicked we _always_ hide the post
regardless of score and sensitivity settings. This way the action reflects
expectations of the user.
* FEATURE: Add keywords support for site_settings search
This change allows for a new `keywords` field that can be added to site
settings in order to help with searching. Keywords are not visible in
the UI, but site settings matching one of the contained keywords will
appear when searching for that keyword.
Keywords can be added for site settings inside of the
`config/locales/server.en.yml` file under the new `keywords` key.
```
site_settings
example_1: "fancy description"
example_2: "another description"
keywords:
example_1: "capybara"
```
* Add keywords entry for a recently changed site setting and add system specs
* Use page.visit now that we have our own visit
This reverts commit 5f0bc4557f.
Through extensive internal discussion we have decided to revert
this change, as it significantly impacted moderation flow for
some Discourse site moderators, especially around "something else"
flags. We need to re-approach how flags are counted holistically,
so to that end this change is being reverted.
This commit adds a new Revise... action that can be taken
for queued post reviewables. This will open a modal where
the user can select a Reason from a preconfigured list
(or by choosing Other..., a custom reason) and provide feedback
to the user about their post.
The post will be rejected still, but a PM will also be sent to
the user so they have an opportunity to improve their post when
they resubmit it.
This PR introduces three new concepts to Discourse codebase through an addon called "FloatKit":
- menu
- tooltip
- toast
## Tooltips
### Component
Simple cases can be express with an API similar to DButton:
```hbs
<DTooltip
@Label={{i18n "foo.bar"}}
@ICON="check"
@content="Something"
/>
```
More complex cases can use blocks:
```hbs
<DTooltip>
<:trigger>
{{d-icon "check"}}
<span>{{i18n "foo.bar"}}</span>
</:trigger>
<:content>
Something
</:content>
</DTooltip>
```
### Service
You can manually show a tooltip using the `tooltip` service:
```javascript
const tooltipInstance = await this.tooltip.show(
document.querySelector(".my-span"),
options
)
// and later manual close or destroy it
tooltipInstance.close();
tooltipInstance.destroy();
// you can also just close any open tooltip through the service
this.tooltip.close();
```
The service also allows you to register event listeners on a trigger, it removes the need for you to manage open/close of a tooltip started through the service:
```javascript
const tooltipInstance = this.tooltip.register(
document.querySelector(".my-span"),
options
)
// when done you can destroy the instance to remove the listeners
tooltipInstance.destroy();
```
Note that the service also allows you to use a custom component as content which will receive `@data` and `@close` as args:
```javascript
const tooltipInstance = await this.tooltip.show(
document.querySelector(".my-span"),
{
component: MyComponent,
data: { foo: 1 }
}
)
```
## Menus
Menus are very similar to tooltips and provide the same kind of APIs:
### Component
```hbs
<DMenu @ICON="plus" @Label={{i18n "foo.bar"}}>
<ul>
<li>Foo</li>
<li>Bat</li>
<li>Baz</li>
</ul>
</DMenu>
```
They also support blocks:
```hbs
<DMenu>
<:trigger>
{{d-icon "plus"}}
<span>{{i18n "foo.bar"}}</span>
</:trigger>
<:content>
<ul>
<li>Foo</li>
<li>Bat</li>
<li>Baz</li>
</ul>
</:content>
</DMenu>
```
### Service
You can manually show a menu using the `menu` service:
```javascript
const menuInstance = await this.menu.show(
document.querySelector(".my-span"),
options
)
// and later manual close or destroy it
menuInstance.close();
menuInstance.destroy();
// you can also just close any open tooltip through the service
this.menu.close();
```
The service also allows you to register event listeners on a trigger, it removes the need for you to manage open/close of a tooltip started through the service:
```javascript
const menuInstance = this.menu.register(
document.querySelector(".my-span"),
options
)
// when done you can destroy the instance to remove the listeners
menuInstance.destroy();
```
Note that the service also allows you to use a custom component as content which will receive `@data` and `@close` as args:
```javascript
const menuInstance = await this.menu.show(
document.querySelector(".my-span"),
{
component: MyComponent,
data: { foo: 1 }
}
)
```
## Toasts
Interacting with toasts is made only through the `toasts` service.
A default component is provided (DDefaultToast) and can be used through dedicated service methods:
- this.toasts.success({ ... });
- this.toasts.warning({ ... });
- this.toasts.info({ ... });
- this.toasts.error({ ... });
- this.toasts.default({ ... });
```javascript
this.toasts.success({
data: {
title: "Foo",
message: "Bar",
actions: [
{
label: "Ok",
class: "btn-primary",
action: (componentArgs) => {
// eslint-disable-next-line no-alert
alert("Closing toast:" + componentArgs.data.title);
componentArgs.close();
},
}
]
},
});
```
You can also provide your own component:
```javascript
this.toasts.show(MyComponent, {
autoClose: false,
class: "foo",
data: { baz: 1 },
})
```
Co-authored-by: Martin Brennan <mjrbrennan@gmail.com>
Co-authored-by: Isaac Janzen <50783505+janzenisaac@users.noreply.github.com>
Co-authored-by: David Taylor <david@taylorhq.com>
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
Second iteration of https://github.com/discourse/discourse/pull/23312 with a fix for embroider not resolving an export file using .gjs extension.
---
This PR introduces three new concepts to Discourse codebase through an addon called "FloatKit":
- menu
- tooltip
- toast
## Tooltips
### Component
Simple cases can be express with an API similar to DButton:
```hbs
<DTooltip
@label={{i18n "foo.bar"}}
@icon="check"
@content="Something"
/>
```
More complex cases can use blocks:
```hbs
<DTooltip>
<:trigger>
{{d-icon "check"}}
<span>{{i18n "foo.bar"}}</span>
</:trigger>
<:content>
Something
</:content>
</DTooltip>
```
### Service
You can manually show a tooltip using the `tooltip` service:
```javascript
const tooltipInstance = await this.tooltip.show(
document.querySelector(".my-span"),
options
)
// and later manual close or destroy it
tooltipInstance.close();
tooltipInstance.destroy();
// you can also just close any open tooltip through the service
this.tooltip.close();
```
The service also allows you to register event listeners on a trigger, it removes the need for you to manage open/close of a tooltip started through the service:
```javascript
const tooltipInstance = this.tooltip.register(
document.querySelector(".my-span"),
options
)
// when done you can destroy the instance to remove the listeners
tooltipInstance.destroy();
```
Note that the service also allows you to use a custom component as content which will receive `@data` and `@close` as args:
```javascript
const tooltipInstance = await this.tooltip.show(
document.querySelector(".my-span"),
{
component: MyComponent,
data: { foo: 1 }
}
)
```
## Menus
Menus are very similar to tooltips and provide the same kind of APIs:
### Component
```hbs
<DMenu @icon="plus" @label={{i18n "foo.bar"}}>
<ul>
<li>Foo</li>
<li>Bat</li>
<li>Baz</li>
</ul>
</DMenu>
```
They also support blocks:
```hbs
<DMenu>
<:trigger>
{{d-icon "plus"}}
<span>{{i18n "foo.bar"}}</span>
</:trigger>
<:content>
<ul>
<li>Foo</li>
<li>Bat</li>
<li>Baz</li>
</ul>
</:content>
</DMenu>
```
### Service
You can manually show a menu using the `menu` service:
```javascript
const menuInstance = await this.menu.show(
document.querySelector(".my-span"),
options
)
// and later manual close or destroy it
menuInstance.close();
menuInstance.destroy();
// you can also just close any open tooltip through the service
this.menu.close();
```
The service also allows you to register event listeners on a trigger, it removes the need for you to manage open/close of a tooltip started through the service:
```javascript
const menuInstance = this.menu.register(
document.querySelector(".my-span"),
options
)
// when done you can destroy the instance to remove the listeners
menuInstance.destroy();
```
Note that the service also allows you to use a custom component as content which will receive `@data` and `@close` as args:
```javascript
const menuInstance = await this.menu.show(
document.querySelector(".my-span"),
{
component: MyComponent,
data: { foo: 1 }
}
)
```
## Toasts
Interacting with toasts is made only through the `toasts` service.
A default component is provided (DDefaultToast) and can be used through dedicated service methods:
- this.toasts.success({ ... });
- this.toasts.warning({ ... });
- this.toasts.info({ ... });
- this.toasts.error({ ... });
- this.toasts.default({ ... });
```javascript
this.toasts.success({
data: {
title: "Foo",
message: "Bar",
actions: [
{
label: "Ok",
class: "btn-primary",
action: (componentArgs) => {
// eslint-disable-next-line no-alert
alert("Closing toast:" + componentArgs.data.title);
componentArgs.close();
},
}
]
},
});
```
You can also provide your own component:
```javascript
this.toasts.show(MyComponent, {
autoClose: false,
class: "foo",
data: { baz: 1 },
})
```
Co-authored-by: Martin Brennan <mjrbrennan@gmail.com>
Co-authored-by: Isaac Janzen <50783505+janzenisaac@users.noreply.github.com>
Co-authored-by: David Taylor <david@taylorhq.com>
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
This PR introduces three new UI elements to Discourse codebase through an addon called "FloatKit":
- menu
- tooltip
- toast
Simple cases can be express with an API similar to DButton:
```hbs
<DTooltip
@label={{i18n "foo.bar"}}
@icon="check"
@content="Something"
/>
```
More complex cases can use blocks:
```hbs
<DTooltip>
<:trigger>
{{d-icon "check"}}
<span>{{i18n "foo.bar"}}</span>
</:trigger>
<:content>
Something
</:content>
</DTooltip>
```
You can manually show a tooltip using the `tooltip` service:
```javascript
const tooltipInstance = await this.tooltip.show(
document.querySelector(".my-span"),
options
)
// and later manually close or destroy it
tooltipInstance.close();
tooltipInstance.destroy();
// you can also just close any open tooltip through the service
this.tooltip.close();
```
The service also allows you to register event listeners on a trigger, it removes the need for you to manage open/close of a tooltip started through the service:
```javascript
const tooltipInstance = this.tooltip.register(
document.querySelector(".my-span"),
options
)
// when done you can destroy the instance to remove the listeners
tooltipInstance.destroy();
```
Note that the service also allows you to use a custom component as content which will receive `@data` and `@close` as args:
```javascript
const tooltipInstance = await this.tooltip.show(
document.querySelector(".my-span"),
{
component: MyComponent,
data: { foo: 1 }
}
)
```
Menus are very similar to tooltips and provide the same kind of APIs:
```hbs
<DMenu @icon="plus" @label={{i18n "foo.bar"}}>
<ul>
<li>Foo</li>
<li>Bat</li>
<li>Baz</li>
</ul>
</DMenu>
```
They also support blocks:
```hbs
<DMenu>
<:trigger>
{{d-icon "plus"}}
<span>{{i18n "foo.bar"}}</span>
</:trigger>
<:content>
<ul>
<li>Foo</li>
<li>Bat</li>
<li>Baz</li>
</ul>
</:content>
</DMenu>
```
You can manually show a menu using the `menu` service:
```javascript
const menuInstance = await this.menu.show(
document.querySelector(".my-span"),
options
)
// and later manually close or destroy it
menuInstance.close();
menuInstance.destroy();
// you can also just close any open tooltip through the service
this.menu.close();
```
The service also allows you to register event listeners on a trigger, it removes the need for you to manage open/close of a tooltip started through the service:
```javascript
const menuInstance = this.menu.register(
document.querySelector(".my-span"),
options
)
// when done you can destroy the instance to remove the listeners
menuInstance.destroy();
```
Note that the service also allows you to use a custom component as content which will receive `@data` and `@close` as args:
```javascript
const menuInstance = await this.menu.show(
document.querySelector(".my-span"),
{
component: MyComponent,
data: { foo: 1 }
}
)
```
Interacting with toasts is made only through the `toasts` service.
A default component is provided (DDefaultToast) and can be used through dedicated service methods:
- this.toasts.success({ ... });
- this.toasts.warning({ ... });
- this.toasts.info({ ... });
- this.toasts.error({ ... });
- this.toasts.default({ ... });
```javascript
this.toasts.success({
data: {
title: "Foo",
message: "Bar",
actions: [
{
label: "Ok",
class: "btn-primary",
action: (componentArgs) => {
// eslint-disable-next-line no-alert
alert("Closing toast:" + componentArgs.data.title);
componentArgs.close();
},
}
]
},
});
```
You can also provide your own component:
```javascript
this.toasts.show(MyComponent, {
autoClose: false,
class: "foo",
data: { baz: 1 },
})
```
Co-authored-by: Martin Brennan <mjrbrennan@gmail.com>
Co-authored-by: Isaac Janzen <50783505+janzenisaac@users.noreply.github.com>
Co-authored-by: David Taylor <david@taylorhq.com>
Co-authored-by: Jarek Radosz <jradosz@gmail.com>
This adds a new secure_uploads_pm_only site setting. When secure_uploads
is true with this setting, only uploads created in PMs will be marked
secure; no uploads in secure categories will be marked as secure, and
the login_required site setting has no bearing on upload security
either.
This is meant to be a stopgap solution to prevent secure uploads
in a single place (private messages) for sensitive admin data exports.
Ideally we would want a more comprehensive way of saying that certain
upload types get secured which is a hybrid/mixed mode secure uploads,
but for now this will do the trick.
FEATURE: Only approved flags for post counters
* Why was this change necessary?
The counters for flagged posts in the user's profile and user index from
the admin view include flags that were rejected, ignored or pending
review. This introduces unnecessary noise. Also the flagged posts
counter in the user's profile includes custom flags which add further
noise to this signal.
* How does it address the problem?
* Modifying User#flags_received_count to return posts with only approved
standard flags
* Refactoring User#number_of_flagged_posts to alias to
User#flags_received_count
* Updating the flagged post staff counter hyperlink to navigate to a
filtered view of that user's approved flagged posts to maintain
consistency with the counter
* Adding system tests for the profile page to cover the flagged posts
staff counter
By default, only 10 members are highlighted on group cards. However,
joining/leaving a big group via the buttons on the group card results in
up to 50 members being highlighted. For large groups, this causes the card
to move off-screen.
This happens because, while the initial render explicitly fetches only 10
members, we don't seem to apply the same limit as part of the member
reload performed when a user leaves/joins via the buttons on the card.
This PR fixes that by only making the first 10 users available for
highlight regardless of the number of members loaded in the store.
* Why was this change necessary?
The current logic in the user.hbs template file does not render the
trust level element for the user's info panel when the user is TL0,
because 0 is treated as falsey in the `if` conditional block.
Ref: https://meta.discourse.org/t/tl0-not-displayed-on-users-profile-pages/271779/10
* How does it address the problem?
This PR adds a predicate helper method local to the user controller that
includes an additional check which returns true if the trust_level of
the user is 0 on top of the existing logic. This allows TL0 users to
have their trust level rendered correctly in their profile's info panel.
Performing a `Delete User`/`Delete and Block User` reviewable actions for a
queued post reviewable from the `review.show` route results in an error
popup even if the action completes successfully.
This happens because unlike other reviewable types, a user delete action
on a queued post reviewable results in the deletion of the reviewable
itself. A subsequent attempt to reload the reviewable record results in
404. The deletion happens as part of the call to `UserDestroyer` which
includes a step for destroying reviewables created by the user being
destroyed. At the root of this is the creator of the queued post
being set as the creator of the reviewable as instead of the system
user.
This change assigns the creator of the reviewable to the system user and
uses the more approapriate `target_created_by` column for the creator of the
post being queued.
1) Bookmarking posts and topics topic level bookmarks clears all topic bookmarks from the topic bookmark button if more than one post is bookmarked
Failure/Error: expect(Bookmark.where(user: current_user).count).to eq(0)
expected: 0
got: 2
This commit makes sure we don't load all data into memory when doing CSV exports.
The most important change here made to the recently introduced export of chat
messages (3ea31f4). We were loading all data into memory in the first version, with
this commit it's not the case anymore.
Speaking of old exports. Some of them already use find_each, and it worked as
expected, without loading all data into memory. And it will proceed working as
expected after this commit.
In general, I made sure this change didn't break other CSV exports, first manually, and
then by writing system specs for them. Sadly, I haven't managed yet to make those
specs stable, they work fine locally, but flaky in GitHub actions, so I've disabled them
for now.
I'll be making more changes to the CSV exports code soon, those system specs will be
very helpful. I'll be running them locally, and I hope I'll manage to make them stable
while doing that work.
1) Edit Category when editing a category with form templates set should have form templates enabled and showing the selected templates
Failure/Error: expect(category_page).to have_selected_template(selected_templates)
expected `#<PageObjects::Pages::Category:0x00007fdb278fbd30>.has_selected_template?("template_0,template_1")` to be truthy, got false
Wait for CSS rather than trying to compare attr directly
and also make sure the ids are always in order.
This PR splits up the preference that controls the count vs dot and destination of sidebar links, which is really hard to understand, into 2 simpler checkboxes:
The new preferences/checkboxes are off by default, but there are database migrations to switch the old preference to the new ones so that existing users don't have to update their preferences to keep their preferred behavior of sidebar links when this changed is rolled out.
Internal topic: t/103529.
Communities can use sidebar or header dropdown, therefore navigation menu is a better name settings in 2 places:
- Old user sidebar preferences;
- Site setting about default tags and categories.
One user can create a post or chat message with a hashtag they
have permission to use, but then when other users look at that
post they will see an empty space next to the hashtag because they
do not have the permission to load the colors in CSS classes for
the related category.
This fixes the issue by adding a default color with a special
CSS class if the user doesn't have permission to see the linked
channel/category on the hashtag.
## What is the problem?
MessageBus by default uses long polling which keeps a connection
open for 25 seconds by default. The problem here is that Capybara does not know about these
connections being kept opened by MessageBus and hence does not know how
to stop these connections at the end of each test. As a result, the long polling MessageBus connections are kept opened by the browser and we hit chrome's limit of 6 concurrent requests per host, new request made in the browser is marked as "pending" until a request is freed up. Since we keep a MessageBus long polling connection opened for 25 seconds, our finders in Capybara end up hitting Capybara's wait time out causing the tests to fail.
## What is the fix?
Since we can't rely on Capybara to close all the existing Capybara
connections, we manually execute a script to stop all MessageBus
connections after each system test.
```
for i in {1..10}; do
echo "Running iteration $i"
PARALLEL_TEST_PROCESSORS=8 CAPYBARA_DEFAULT_MAX_WAIT_TIME=10 bin/turbo_rspec --seed=34908 --profile --verbose --format documentation spec/system
if [ $? -ne 0 ]; then
echo "Error encountered on iteration $i"
exit 1
fi
done
echo "All 10 iterations completed successfully"
```
Without the fix, the script fails consistently in the first few iterations. Running in non-headless mode with the "network" tab opened will reveal the requests that are marked as pending.
Why is this change required?
The flaky system test was due to the fact that we had to poll for the
user preferences interface page to reload after saving. However, this
turns out to be a bug on the user perferences interface page because the
page should only reload if the user has selected a new theme that is
different from the site's default but we were reloading the page for
users that did not have any user theme selected. Therefore there was an
unnecessary reload happening when saving other fields on the user
preferences interface page.
The fix use the SelectKit component in the spec and improves reliability of SelectKit component to ensure expanded/collapsed state effectively set/present.
Multiple lines have also been removed as they are not necessary, eg:
- check button is present
- click button
The check is un-necesssary as we won't find the button on click if not present. This kind of checks are only necessary when another element has to be present before the button is show, eg:
- check modal is displayed
- click button
FInally this commit changes the way the SelectKit component initializes component and now uses a css selector instead of a finder, it ensures we are always getting fresh object and allows to build complete selectors: ".context[data-id=1].foo:enabled"
Watching screenshots of failures it appears that sometimes the reply was stuck at: `this is a #` due to the autocomplete showing, given we only need to send a reply here? I think fill_in + click send should be more reliable here.
Note I also tweaked `send_reply` to accept a content param and use it to fill composer when given.
Page settings can be very long and the setting can be way out of viewport. This should ensure the setting can be found and clicked.
This was for example causing this flakey in discourse-topic-voting:
```
Failures:
1) Voting enables voting in category topics and votes
Failure/Error: find(".edit-category-tab .#{setting} label.checkbox-label", text: text).click
Capybara::ElementNotFound:
Unable to find css ".edit-category-tab .enable-topic-voting label.checkbox-label"
[Screenshot Image]: /__w/discourse/discourse/tmp/capybara/failures_r_spec_example_groups_voting_enables_voting_in_category_topics_and_votes_873.png
~~~~~~~ JS LOGS ~~~~~~~
http://localhost:31341/favicon.ico - Failed to load resource: the server responded with a status of 404 (Not Found)
~~~~~ END JS LOGS ~~~~~
# ./vendor/bundle/ruby/3.2.0/gems/capybara-3.39.1/lib/capybara/node/finders.rb:312:in `block in synced_resolve'
# ./vendor/bundle/ruby/3.2.0/gems/capybara-3.39.1/lib/capybara/node/base.rb:84:in `synchronize'
# ./vendor/bundle/ruby/3.2.0/gems/capybara-3.39.1/lib/capybara/node/finders.rb:301:in `synced_resolve'
# ./vendor/bundle/ruby/3.2.0/gems/capybara-3.39.1/lib/capybara/node/finders.rb:60:in `find'
# ./vendor/bundle/ruby/3.2.0/gems/capybara-3.39.1/lib/capybara/session.rb:773:in `find'
# ./vendor/bundle/ruby/3.2.0/gems/capybara-3.39.1/lib/capybara/dsl.rb:52:in `call'
# ./vendor/bundle/ruby/3.2.0/gems/capybara-3.39.1/lib/capybara/dsl.rb:52:in `find'
# ./spec/system/page_objects/pages/category.rb:34:in `toggle_setting'
# ./plugins/discourse-topic-voting/spec/system/voting_spec.rb:39:in `block (2 levels) in <main>'
# ./spec/rails_helper.rb:368:in `block (3 levels) in <top (required)>'
# ./vendor/bundle/ruby/3.2.0/gems/timeout-0.3.2/lib/timeout.rb:189:in `block in timeout'
# ./vendor/bundle/ruby/3.2.0/gems/timeout-0.3.2/lib/timeout.rb:36:in `block in catch'
# ./vendor/bundle/ruby/3.2.0/gems/timeout-0.3.2/lib/timeout.rb:36:in `catch'
# ./vendor/bundle/ruby/3.2.0/gems/timeout-0.3.2/lib/timeout.rb:36:in `catch'
# ./vendor/bundle/ruby/3.2.0/gems/timeout-0.3.2/lib/timeout.rb:198:in `timeout'
# ./spec/rails_helper.rb:364:in `block (2 levels) in <top (required)>'
# ./spec/rails_helper.rb:356:in `block (2 levels) in <top (required)>'
# ./vendor/bundle/ruby/3.2.0/gems/webmock-3.18.1/lib/webmock/rspec.rb:37:in `block (2 levels) in <top (required)>'
Finished in 7 minutes 18 seconds (files took 0 seconds to load)
445 examples, 1 failure, 17 pending, 1 error occurred outside of examples
Failed examples:
rspec ./plugins/discourse-topic-voting/spec/system/voting_spec.rb:27 # Voting enables voting in category topics and votes
```
In tests we could attempt to click the preview button when it was not enabled yet, causing a noop and a future failure. This fix ensures we try to find (and wait) for an enabled button.
This should help with this specific flakey:
```
Failures:
1) Admin Customize Form Templates when visiting the page to create a new form template should render all the input field types in the preview
Failure/Error: find(".form-template-field__#{type}").present?
Capybara::ElementNotFound:
Unable to find css ".form-template-field__input"
[Screenshot Image]: /__w/discourse/discourse/tmp/capybara/failures_r_spec_example_groups_admin_customize_form_templates_when_visiting_the_page_to_create_a_new_form_template_should_render_all_the_input_field_types_in_the_preview_277.png
~~~~~~~ JS LOGS ~~~~~~~
http://localhost:31339/favicon.ico - Failed to load resource: the server responded with a status of 404 (Not Found)
~~~~~ END JS LOGS ~~~~~
# ./vendor/bundle/ruby/3.2.0/gems/capybara-3.39.1/lib/capybara/node/finders.rb:312:in `block in synced_resolve'
# ./vendor/bundle/ruby/3.2.0/gems/capybara-3.39.1/lib/capybara/node/base.rb:84:in `synchronize'
# ./vendor/bundle/ruby/3.2.0/gems/capybara-3.39.1/lib/capybara/node/finders.rb:301:in `synced_resolve'
# ./vendor/bundle/ruby/3.2.0/gems/capybara-3.39.1/lib/capybara/node/finders.rb:60:in `find'
# ./vendor/bundle/ruby/3.2.0/gems/capybara-3.39.1/lib/capybara/session.rb:773:in `find'
# ./vendor/bundle/ruby/3.2.0/gems/capybara-3.39.1/lib/capybara/dsl.rb:52:in `call'
# ./vendor/bundle/ruby/3.2.0/gems/capybara-3.39.1/lib/capybara/dsl.rb:52:in `find'
# ./spec/system/page_objects/pages/form_template.rb:55:in `has_input_field?'
# ./spec/system/admin_customize_form_templates_spec.rb:114:in `block (3 levels) in <main>'
# ./spec/rails_helper.rb:368:in `block (3 levels) in <top (required)>'
# ./vendor/bundle/ruby/3.2.0/gems/timeout-0.3.2/lib/timeout.rb:189:in `block in timeout'
# ./vendor/bundle/ruby/3.2.0/gems/timeout-0.3.2/lib/timeout.rb:36:in `block in catch'
# ./vendor/bundle/ruby/3.2.0/gems/timeout-0.3.2/lib/timeout.rb:36:in `catch'
# ./vendor/bundle/ruby/3.2.0/gems/timeout-0.3.2/lib/timeout.rb:36:in `catch'
# ./vendor/bundle/ruby/3.2.0/gems/timeout-0.3.2/lib/timeout.rb:198:in `timeout'
# ./spec/rails_helper.rb:364:in `block (2 levels) in <top (required)>'
# ./spec/rails_helper.rb:356:in `block (2 levels) in <top (required)>'
# ./vendor/bundle/ruby/3.2.0/gems/webmock-3.18.1/lib/webmock/rspec.rb:37:in `block (2 levels) in <top (required)>'
```
In tests we could attempt to click the button before it was enabled and it could also not be visible on screen. This commits attempts to solve both problems.
It should solve this failure:
```
Failures:
1) Admin Customize Form Templates when visiting the page to create a new form template should allow admin to create a new form template
Failure/Error: find(".form-templates__table tbody tr td", text: name).present?
Capybara::ElementNotFound:
Unable to find css ".form-templates__table tbody tr td"
[Screenshot Image]: /__w/discourse/discourse/tmp/capybara/failures_r_spec_example_groups_admin_customize_form_templates_when_visiting_the_page_to_create_a_new_form_template_should_allow_admin_to_create_a_new_form_template_911.png
~~~~~~~ JS LOGS ~~~~~~~
http://localhost:31339/favicon.ico - Failed to load resource: the server responded with a status of 404 (Not Found)
~~~~~ END JS LOGS ~~~~~
# ./vendor/bundle/ruby/3.2.0/gems/capybara-3.39.1/lib/capybara/node/finders.rb:312:in `block in synced_resolve'
# ./vendor/bundle/ruby/3.2.0/gems/capybara-3.39.1/lib/capybara/node/base.rb:84:in `synchronize'
# ./vendor/bundle/ruby/3.2.0/gems/capybara-3.39.1/lib/capybara/node/finders.rb:301:in `synced_resolve'
# ./vendor/bundle/ruby/3.2.0/gems/capybara-3.39.1/lib/capybara/node/finders.rb:60:in `find'
# ./vendor/bundle/ruby/3.2.0/gems/capybara-3.39.1/lib/capybara/session.rb:773:in `find'
# ./vendor/bundle/ruby/3.2.0/gems/capybara-3.39.1/lib/capybara/dsl.rb:52:in `call'
# ./vendor/bundle/ruby/3.2.0/gems/capybara-3.39.1/lib/capybara/dsl.rb:52:in `find'
# ./spec/system/page_objects/pages/form_template.rb:21:in `has_form_template?'
# ./spec/system/admin_customize_form_templates_spec.rb:71:in `block (3 levels) in <main>'
# ./spec/rails_helper.rb:381:in `block (3 levels) in <top (required)>'
# ./vendor/bundle/ruby/3.2.0/gems/timeout-0.3.2/lib/timeout.rb:189:in `block in timeout'
# ./vendor/bundle/ruby/3.2.0/gems/timeout-0.3.2/lib/timeout.rb:36:in `block in catch'
# ./vendor/bundle/ruby/3.2.0/gems/timeout-0.3.2/lib/timeout.rb:36:in `catch'
# ./vendor/bundle/ruby/3.2.0/gems/timeout-0.3.2/lib/timeout.rb:36:in `catch'
# ./vendor/bundle/ruby/3.2.0/gems/timeout-0.3.2/lib/timeout.rb:198:in `timeout'
# ./spec/rails_helper.rb:377:in `block (2 levels) in <top (required)>'
# ./spec/rails_helper.rb:369:in `block (2 levels) in <top (required)>'
# ./vendor/bundle/ruby/3.2.0/gems/webmock-3.18.1/lib/webmock/rspec.rb:37:in `block (2 levels) in <top (required)>'
```
added site toggle functionality through site settings
added tests to implemented feature
Introduced suggested correction
renamed find_new_topic method and deleted click_new_topic_button method
What is the problem?
We are relying on RSpec custom matchers in system tests by defining
predicates in page objects. The problem is that this can result in a
system test unnecessarily waiting up till the full duration of
Capybara's default wait time when the RSpec custom matcher is used with
`not_to`. Considering this topic page object where we have a `has_post?`
predicate defined.
```
class Topic < PageObject
def has_post?
has_css?('something')
end
end
```
The assertion `expect(Topic.new).not_to have_post` will end up waiting
the full Capybara's default wait time since the RSpec custom matcher is
calling Capybara's `has_css?` method which will wait until the selector
appear. If the selector has already disappeared by the time the
assertion is called, we end up waiting for something that will never
exists.
This commit fixes such cases by introducing new predicates that uses
the `has_no_*` versions of Capybara's node matchers.
For future reference, `to have_css` and `not_to have_css` is safe to sue
because the RSpec matcher defined by Capbyara is smart enough to call
`has_css?` or `has_no_css?` based on the expectation of the assertion.
Responding to negative behaviour tends to solicit more of the same. Common wisdom states: "don't feed the trolls".
This change codifies that advice by introducing a new nudge when hitting the reply button on a flagged post. It will be shown if either the current user, or two other users (configurable via a site setting) have flagged the post.
This feature will allow sites to define which emoji are not allowed. Emoji in this list should be excluded from the set we show in the core emoji picker used in the composer for posts when emoji are enabled. And they should not be allowed to be chosen to be added to messages or as reactions in chat.
This feature prevents denied emoji from appearing in the following scenarios:
- topic title and page title
- private messages (topic title and body)
- inserting emojis into a chat
- reacting to chat messages
- using the emoji picker (composer, user status etc)
- using search within emoji picker
It also takes into account the various ways that emojis can be accessed, such as:
- emoji autocomplete suggestions
- emoji favourites (auto populates when adding to emoji deny list for example)
- emoji inline translations
- emoji skintones (ie. for certain hand gestures)
When a category has default_list_filter=none, there were a number of issues which this commit resolves:
1. When using the breadcrumbs to navigate a `default_list_filter=none` category, adding a tag filter would not apply the no-subcategories filter, but the subcategories dropdown would still say 'none'. This commit adjusts `getCategoryAndTagUrl` so that `/none` is added to the URL
2. When landing on `/tags/c/{slug}/{id}/{tag}`, for a default_list_filter=none category, it would include subcategories. This commit introduces a client-side redirect to match the behavior of `/c/{slug}/{id}`
3. When directly navigating to `/c/{slug}/{id}`, it was correctly redirecting to `/c/{slug}/{id}/none`, BUT it was still using the preloaded data for the old route. This has been happening since e7a84948. Prior to that, the preloaded data was discarded and a new JSON request was made to the server. This commit restores that discarding behavior. In future we may want to look into making this more efficient.
System specs are introduced to provide end-end testing of this functionality
