Adding a filter without a type parameter has been deprecated for the last three years, and was marked for removal in 2.9.0.
During this time we have had a few deprecation warnings in logs coming from Reports::Bookmarks.
The fallback was to set the type to the name of the filter. This change just passes the type (same as name) explicitly instead, and removes the deprecation fallback.
This patch sets some limits on custom fields:
- an entity can’t have more than 100 custom fields defined on it
- a custom field can’t hold a value greater than 10,000,000 characters
The current implementation of custom fields is relatively complex and
does an upsert in SQL at some point, thus preventing to simply add an
`ActiveRecord` validation on the custom field model without having to
rewrite a part of the existing logic.
That’s one of the reasons this patch is implementing validations in the
`HasCustomField` module adding them to the model including the module.
This amends it so our cached counting reliant specs run in synchronize mode
When running async there are situations where data is left over in the table
after a transactional test. This means that repeat runs of the test suite
fail.
Previously, Discourse's password hashing was hard-coded to a specific algorithm and parameters. Any changes to the algorithm or parameters would essentially invalidate all existing user passwords.
This commit introduces a new `password_algorithm` column on the `users` table. This persists the algorithm/parameters which were use to generate the hash for a given user. All existing rows in the users table are assumed to be using Discourse's current algorithm/parameters. With this data stored per-user in the database, we'll be able to keep existing passwords working while adjusting the algorithm/parameters for newly hashed passwords.
Passwords which were hashed with an old algorithm will be automatically re-hashed with the new algorithm when the user next logs in.
Values in the `password_algorithm` column are based on the PHC string format (https://github.com/P-H-C/phc-string-format/blob/master/phc-sf-spec.md). Discourse's existing algorithm is described by the string `$pbkdf2-sha256$i=64000,l=32$`
To introduce a new algorithm and start using it, make sure it's implemented in the `PasswordHasher` library, then update `User::TARGET_PASSWORD_ALGORITHM`.
The algorithm failed to find the correct category by slug when there are multiple sub-sub-categories with the same child-category name and the first child doesn't have the correct grandchild.
So, searching for "child / grandchild" worked in the following case, it found (3):
- (1) parent 1
- (2) child
- (3) grandchild
- (4) parent 2
- (5) child
- (6) grandchild
But it failed to find the grandchild in the following case:
- (1) parent 1
- (2) child
- (4) parent 2
- (5) child
- (6) grandchild
And this also fixes a flaky spec by forcing categories to always order by by `parent_category_id` and `id`.
This makes it possible to partly revert 60990aab55
This is just cleaning up a TODO I had to add more specs
to this controller -- there are more thorough tests on the
actual HashtagService class and the type-specific hashtag
classes.
* DEV: Remove enable_whispers site setting
Whispers are enabled as long as there is at least one group allowed to
whisper, see whispers_allowed_groups site setting.
* DEV: Always enable whispers for admins if at least one group is allowed.
* FIX: Use Category.secured(guardian) for hashtag datasource
Follow up to comments in #19219, changing the category
hashtag datasource to use Category.secured(guardian) instead
of Site.new(guardian).categories here since the latter does
more work for not much benefit, and the query time is the
same. Also eliminates some Hash -> Model back and forth
busywork. Add some more specs too.
* FIX: Server-side hashtag lookup cooking user loading
When we were using the PrettyText.options.currentUser
and parsing back and forth with JSON for the hashtag
lookups server-side, we had a bug where the user's
secure categories were not loaded since we never actually
loaded a User model from the database, only parsed it
from JSON.
This commit fixes the issue by instead using the
PretyText.options.userId and looking up the user directly
from the database when calling hashtag_lookup via the
PrettyText::Helpers code when cooking server-side. Added
the missing spec to check for this as well.
In this PR, we introduced an option, that when all authenticators are disabled, but backup codes still exists, user can authenticate with those backup codes. This was reverted as this is not expected behavior.
https://github.com/discourse/discourse/pull/18982
Instead, when the last authenticator is deleted, backup codes should be deleted as well. Because this disables 2fa, user is asked to confirm that action by typing text.
In addition, UI for 2fa preferences was refreshed.
Adds stats for API and user API requests similar to regular page views.
This comes with a new report to visualize API requests per day like the
consolidated page views one.
This commit fleshes out and adds functionality for the new `#hashtag` search and
lookup system, still hidden behind the `enable_experimental_hashtag_autocomplete`
feature flag.
**Serverside**
We have two plugin API registration methods that are used to define data sources
(`register_hashtag_data_source`) and hashtag result type priorities depending on
the context (`register_hashtag_type_in_context`). Reading the comments in plugin.rb
should make it clear what these are doing. Reading the `HashtagAutocompleteService`
in full will likely help a lot as well.
Each data source is responsible for providing its own **lookup** and **search**
method that returns hashtag results based on the arguments provided. For example,
the category hashtag data source has to take into account parent categories and
how they relate, and each data source has to define their own icon to use for the
hashtag, and so on.
The `Site` serializer has two new attributes that source data from `HashtagAutocompleteService`.
There is `hashtag_icons` that is just a simple array of all the different icons that
can be used for allowlisting in our markdown pipeline, and there is `hashtag_context_configurations`
that is used to store the type priority orders for each registered context.
When sending emails, we cannot render the SVG icons for hashtags, so
we need to change the HTML hashtags to the normal `#hashtag` text.
**Markdown**
The `hashtag-autocomplete.js` file is where I have added the new `hashtag-autocomplete`
markdown rule, and like all of our rules this is used to cook the raw text on both the clientside
and on the serverside using MiniRacer. Only on the server side do we actually reach out to
the database with the `hashtagLookup` function, on the clientside we just render a plainer
version of the hashtag HTML. Only in the composer preview do we do further lookups based
on this.
This rule is the first one (that I can find) that uses the `currentUser` based on a passed
in `user_id` for guardian checks in markdown rendering code. This is the `last_editor_id`
for both the post and chat message. In some cases we need to cook without a user present,
so the `Discourse.system_user` is used in this case.
**Chat Channels**
This also contains the changes required for chat so that chat channels can be used
as a data source for hashtag searches and lookups. This data source will only be
used when `enable_experimental_hashtag_autocomplete` is `true`, so we don't have
to worry about channel results suddenly turning up.
------
**Known Rough Edges**
- Onebox excerpts will not render the icon svg/use tags, I plan to address that in a follow up PR
- Selecting a hashtag + pressing the Quote button will result in weird behaviour, I plan to address that in a follow up PR
- Mixed hashtag contexts for hashtags without a type suffix will not work correctly, e.g. #ux which is both a category and a channel slug will resolve to a category when used inside a post or within a [chat] transcript in that post. Users can get around this manually by adding the correct suffix, for example ::channel. We may get to this at some point in future
- Icons will not show for the hashtags in emails since SVG support is so terrible in email (this is not likely to be resolved, but still noting for posterity)
- Additional refinements and review fixes wil
When this report in the admin dashboard has lots of data ( > 75 days of activity), the dates were ordered incorrectly. This is apparently expected behaviour; when using GROUP BY without specifying the ordering, PG decides to order, and it so happens that it works under some conditions but not others. Explicit ordering fixes the problem.
However, because this works in some conditions but not others, we can't really add a useful test.
Currently, we have available three 2fa methods:
- Token-Based Authenticators
- Physical Security Keys
- Two-Factor Backup Codes
If the first two are deleted, user lose visibility of their backup codes, which suggests that 2fa is disabled.
However, when they try to authenticate, the account is locked, and they have to ask admin to fix that problem.
This PR is fixing the issue. User still sees backup codes in their panel and can use them to authenticate.
In next PR, I will improve UI to clearly notify the user when 2fa is fully disabled and when it is still active.
* Remove old bookmark column ignores to follow up b22450c7a8
* Change some group site setting checks to use the _map helper
* Remove old secure_media helper stub for chat
* Change attr_accessor to attr_reader for preloaded_custom_fields to follow up 70af45055a
Before, whispers were only available for staff members.
Config has been changed to allow to configure privileged groups with access to whispers. Post migration was added to move from the old setting into the new one.
I considered having a boolean column `whisperer` on user model similar to `admin/moderator` for performance reason. Finally, I decided to keep looking for groups as queries are only done for current user and didn't notice any N+1 queries.
The query is very inefficient without any constraints on large sites and
the average of all time to first response since the beginning of time is
not useful as well.
We were calling `dup` on the hash and using that to check for changes. However, we were not duplicating the values, so changes to arrays or nested hashes would not be detected.
Discourse has the Discourse Connect Provider protocol that makes it possible to
use a Discourse instance as an identity provider for external sites. As a
natural extension to this protocol, this PR adds a new feature that makes it
possible to use Discourse as a 2FA provider as well as an identity provider.
The rationale for this change is that it's very difficult to implement 2FA
support in a website and if you have multiple websites that need to have 2FA,
it's unrealistic to build and maintain a separate 2FA implementation for each
one. But with this change, you can piggyback on Discourse to take care of all
the 2FA details for you for as many sites as you wish.
To use Discourse as a 2FA provider, you'll need to follow this guide:
https://meta.discourse.org/t/-/32974. It walks you through what you need to
implement on your end/site and how to configure your Discourse instance. Once
you're done, there is only one additional thing you need to do which is to
include `require_2fa=true` in the payload that you send to Discourse.
When Discourse sees `require_2fa=true`, it'll prompt the user to confirm their
2FA using whatever methods they've enabled (TOTP or security keys), and once
they confirm they'll be redirected back to the return URL you've configured and
the payload will contain `confirmed_2fa=true`. If the user has no 2FA methods
enabled however, the payload will not contain `confirmed_2fa`, but it will
contain `no_2fa_methods=true`.
You'll need to be careful to re-run all the security checks and ensure the user
can still access the resource on your site after they return from Discourse.
This is very important because there's nothing that guarantees the user that
will come back from Discourse after they confirm 2FA is the same user that
you've redirected to Discourse.
Internal ticket: t62183.
Previously cached counting made redis calls in main thread and performed
the flush in main thread.
This could lead to pathological states in extreme heavy load.
This refactor reduces load and cleans up the interface
Previously we were calling `EXPIRE` every time we incremented a given key. Instead, we can call EXPIRE once when the key is first populated. A LUA script is used to make this as efficient as possible.
Consumers of this Concern use daily keys. Since we're now calling EXPIRE only at the beginning of the day, rather than throughout the day, the expire time has been increased from 3 to 4 days.
If a model class calls preload_custom_fields twice then
we have to clear this otherwise the fields are cached inside the
already existing proxy and no new ones are added, so when we check
for custom_fields[KEY] an error is likely to occur
This commit makes a more specific N1NotPreLoadedError from
StandardError to raise when a custom field is loaded before
being preloaded, so it is easier to test that this does
not happen from plugins. Also adds the name of the class
trying to load the custom field to the error message.
* DEV: Sanitize HTML admin inputs
This PR adds on-save HTML sanitization for:
Client site settings
translation overrides
badges descriptions
user fields descriptions
I used Rails's SafeListSanitizer, which [accepts the following HTML tags and attributes](018cf54073/lib/rails/html/sanitizer.rb (L108))
* Make sure that the sanitization logic doesn't corrupt settings with special characters
We want to put the name of the trust level in to generated URLs, not the human-readable form.
i.e.:
`/admin/users/list/newuser`
rather than:
`/admin/users/list/new user`
Refactors `TrustLevel` and moves translations from server to client
Additional changes:
* "staff" and "admin" wasn't translatable in site settings
* it replaces a concatenated string with a translation
* uses translation for trust levels in users_by_trust_level report
* adds a DB migration to rename keys of translation overrides affected by this commit
Over the years we accrued many spelling mistakes in the code base.
This PR attempts to fix spelling mistakes and typos in all areas of the code that are extremely safe to change
- comments
- test descriptions
- other low risk areas
The 'Discourse SSO' protocol is being rebranded to DiscourseConnect. This should help to reduce confusion when 'SSO' is used in the generic sense.
This commit aims to:
- Rename `sso_` site settings. DiscourseConnect specific ones are prefixed `discourse_connect_`. Generic settings are prefixed `auth_`
- Add (server-side-only) backwards compatibility for the old setting names, with deprecation notices
- Copy `site_settings` database records to the new names
- Rename relevant translation keys
- Update relevant translations
This commit does **not** aim to:
- Rename any Ruby classes or methods. This might be done in a future commit
- Change any URLs. This would break existing integrations
- Make any changes to the protocol. This would break existing integrations
- Change any functionality. Further normalization across DiscourseConnect and other auth methods will be done separately
The risks are:
- There is no backwards compatibility for site settings on the client-side. Accessing auth-related site settings in Javascript is fairly rare, and an error on the client side would not be security-critical.
- If a plugin is monkey-patching parts of the auth process, changes to locale keys could cause broken error messages. This should also be unlikely. The old site setting names remain functional, so security-related overrides will remain working.
A follow-up commit will be made with a post-deploy migration to delete the old `site_settings` rows.
* DEV: Remove with_deleted workarounds for old Rails version
These workarounds using private APIs are no longer required in the latest version of Rails. The referenced issue (https://github.com/rails/rails/issues/4306) was closed in 2013. The acts_as_paranoid workaround which this was based on was removed for rails > 5.
Switching to using a scope also allows us to use it within a `belongs_to` relation (e.g. in the Poll model). This avoids issues which can be caused by unscoping all `where` clauses.
Predicates are not necessarily strings, so calling `.join(" AND ")` can sometimes cause weird errors. If we use `WhereClause#ast`, and then `.to_sql` we achieve the same thing with fully public APIs, and it will work successfully for all predicates.
