fish-shell/pcre2-10.21/RunTest

#! /bin/sh

###############################################################################
# Run the PCRE2 tests using the pcre2test program. The appropriate tests are
# selected, depending on which build-time options were used.
#
# When JIT support is available, all appropriate tests are run with and without
# JIT, unless "-nojit" is given on the command line. There are also two tests
# for JIT-specific features, one to be run when JIT support is available
# (unless "-nojit" is specified), and one when it is not.
#
# Whichever of the 8-, 16- and 32-bit libraries exist are tested. It is also
# possible to select which to test by giving "-8", "-16" or "-32" on the
# command line.
#
# As well as "-nojit", "-8", "-16", and "-32", arguments for this script are
# individual test numbers, ranges of tests such as 3-6 or 3- (meaning 3 to the
# end), or a number preceded by ~ to exclude a test. For example, "3-15 ~10"
# runs tests 3 to 15, excluding test 10, and just "~10" runs all the tests
# except test 10. Whatever order the arguments are in, the tests are always run
# in numerical order.
#
# Inappropriate tests are automatically skipped (with a comment to say so). For
# example, if JIT support is not compiled, test 16 is skipped, whereas if JIT
# support is compiled, test 15 is skipped.
#
# Other arguments can be one of the words "-valgrind", "-valgrind-log", or
# "-sim" followed by an argument to run cross-compiled executables under a
# simulator, for example:
#
# RunTest 3 -sim "qemu-arm -s 8388608"
#
# For backwards compatibility, -nojit, -valgrind, -valgrind-log, and -sim may
# be given without the leading "-" character.
#
# When PCRE2 is compiled by clang with -fsanitize arguments, some tests need
# very much more stack than normal. In environments where the stack can be
# set at runtime, -bigstack sets a gigantic stack.
#
# There are two special cases where only one argument is allowed:
#
# If the first and only argument is "ebcdic", the script runs the special
# EBCDIC test that can be useful for checking certain EBCDIC features, even
# when run in an ASCII environment. PCRE2 must be built with EBCDIC support for
# this test to be run.
#
# If the script is obeyed as "RunTest list", a list of available tests is
# output, but none of them are run.
###############################################################################

# Define test titles in variables so that they can be output as a list. Some
# of them are modified (e.g. with -8 or -16) when used in the actual tests.

title0="Test 0: Unchecked pcre2test argument tests (to improve coverage)"
title1="Test 1: Main non-UTF, non-UCP functionality (compatible with Perl >= 5.10)"
title2="Test 2: API, errors, internals, and non-Perl stuff"
title3="Test 3: Locale-specific features"
title4A="Test 4: UTF"
title4B=" and Unicode property support (compatible with Perl >= 5.10)"
title5A="Test 5: API, internals, and non-Perl stuff for UTF"
title5B=" and UCP support"
title6="Test 6: DFA matching main non-UTF, non-UCP functionality"
title7A="Test 7: DFA matching with UTF"
title7B=" and Unicode property support"
title8="Test 8: Internal offsets and code size tests"
title9="Test 9: Specials for the basic 8-bit library"
title10="Test 10: Specials for the 8-bit library with UTF-8 and UCP support"
title11="Test 11: Specials for the basic 16-bit and 32-bit libraries"
title12="Test 12: Specials for the 16-bit and 32-bit libraries UTF and UCP support"
title13="Test 13: DFA specials for the basic 16-bit and 32-bit libraries"
title14="Test 14: DFA specials for UTF and UCP support"
title15="Test 15: Non-JIT limits and other non-JIT tests"
title16="Test 16: JIT-specific features when JIT is not available"
title17="Test 17: JIT-specific features when JIT is available"
title18="Test 18: Tests of the POSIX interface, excluding UTF/UCP"
title19="Test 19: Tests of the POSIX interface with UTF/UCP"
title20="Test 20: Serialization tests"
title21="Test 21: \C tests without UTF (supported for DFA matching)"
title22="Test 22: \C tests with UTF (not supported for DFA matching)"
title23="Test 23: \C disabled test"
maxtest=23

if [ $# -eq 1 -a "$1" = "list" ]; then
  echo $title0
  echo $title1
  echo $title2 "(not UTF or UCP)"
  echo $title3
  echo $title4A $title4B
  echo $title5A $title5B
  echo $title6
  echo $title7A $title7B
  echo $title8
  echo $title9
  echo $title10
  echo $title11
  echo $title12
  echo $title13
  echo $title14
  echo $title15
  echo $title16
  echo $title17
  echo $title18
  echo $title19
  echo $title20
  echo $title21
  echo $title22
  echo $title23
  exit 0
fi

# Set up a suitable "diff" command for comparison. Some systems
# have a diff that lacks a -u option. Try to deal with this.

cf="diff"
diff -u /dev/null /dev/null 2>/dev/null && cf="diff -u"

# Find the test data

if [ -n "$srcdir" -a -d "$srcdir" ] ; then
  testdata="$srcdir/testdata"
elif [ -d "./testdata" ] ; then
  testdata=./testdata
elif [ -d "../testdata" ] ; then
  testdata=../testdata
else
  echo "Cannot find the testdata directory"
  exit 1
fi


# ------ Function to check results of a test -------

# This function is called with three parameters:
#
#  $1 the value of $? after a call to pcre2test
#  $2 the suffix of the output file to compare with
#  $3 the $opt value (empty, -jit, or -dfa)
#
# Note: must define using name(), not "function name", for Solaris.

checkresult()
  {
  if [ $1 -ne 0 ] ; then
    echo "** pcre2test failed - check testtry"
    exit 1
  fi
  case "$3" in
    -jit) with=" with JIT";;
    -dfa) with=" with DFA";;
    *)    with="";;
  esac
  $cf $testdata/testoutput$2 testtry
  if [ $? != 0 ] ; then
    echo ""
    echo "** Test $2 failed$with"
    exit 1
  fi
  echo "  OK$with"
  }


# ------ Function to run and check a special pcre2test arguments test -------

checkspecial()
  {
  $valgrind  $vjs ./pcre2test $1 >>testtry
  if [ $? -ne 0 ] ; then
    echo "** pcre2test $1 failed - check testtry"
    exit 1
  fi
  }


# ------ Special EBCDIC Test -------

if [ $# -eq 1 -a "$1" = "ebcdic" ]; then
  $valgrind ./pcre2test -C ebcdic >/dev/null
  ebcdic=$?
  if [ $ebcdic -ne 1 ] ; then
    echo "Cannot run EBCDIC tests: EBCDIC support not compiled"
    exit 1
  fi
  for opt in "" "-dfa"; do
    ./pcre2test -q $opt $testdata/testinputEBC >testtry
    checkresult $? EBC "$opt"
  done
exit 0
fi


# ------ Normal Tests ------

# Default values

arg8=
arg16=
arg32=
nojit=
bigstack=
sim=
skip=
valgrind=
vjs=

# This is in case the caller has set aliases (as I do - PH)
unset cp ls mv rm

# Process options and select which tests to run; for those that are explicitly
# requested, check that the necessary optional facilities are available.

do0=no
do1=no
do2=no
do3=no
do4=no
do5=no
do6=no
do7=no
do8=no
do9=no
do10=no
do11=no
do12=no
do13=no
do14=no
do15=no
do16=no
do17=no
do18=no
do19=no
do20=no
do21=no
do22=no
do23=no

while [ $# -gt 0 ] ; do
  case $1 in
    0) do0=yes;;
    1) do1=yes;;
    2) do2=yes;;
    3) do3=yes;;
    4) do4=yes;;
    5) do5=yes;;
    6) do6=yes;;
    7) do7=yes;;
    8) do8=yes;;
    9) do9=yes;;
   10) do10=yes;;
   11) do11=yes;;
   12) do12=yes;;
   13) do13=yes;;
   14) do14=yes;;
   15) do15=yes;;
   16) do16=yes;;
   17) do17=yes;;
   18) do18=yes;;
   19) do19=yes;;
   20) do20=yes;;
   21) do21=yes;;
   22) do22=yes;;
   23) do23=yes;;
   -8) arg8=yes;;
  -16) arg16=yes;;
  -32) arg32=yes;;
   bigstack|-bigstack) bigstack=yes;;
   nojit|-nojit) nojit=yes;;
   sim|-sim) shift; sim=$1;;
   valgrind|-valgrind) valgrind="valgrind --tool=memcheck -q --smc-check=all";;
   valgrind-log|-valgrind-log) valgrind="valgrind --tool=memcheck --num-callers=30 --leak-check=no --error-limit=no --smc-check=all --log-file=report.%p ";;
   ~*)
     if expr "$1" : '~[0-9][0-9]*$' >/dev/null; then
       skip="$skip `expr "$1" : '~\([0-9]*\)*$'`"
     else
       echo "Unknown option or test selector '$1'"; exit 1
     fi
   ;;
   *-*)
     if expr "$1" : '[0-9][0-9]*-[0-9]*$' >/dev/null; then
       tf=`expr "$1" : '\([0-9]*\)'`
       tt=`expr "$1" : '.*-\([0-9]*\)'`
       if [ "$tt" = "" ] ; then tt=$maxtest; fi
       if expr \( "$tt" ">" "$maxtest" \) >/dev/null; then
         echo "Invalid test range '$1'"; exit 1
       fi
       while expr "$tf" "<=" "$tt" >/dev/null; do
         eval do${tf}=yes
         tf=`expr $tf + 1`
       done
     else
       echo "Invalid test range '$1'"; exit 1
     fi
   ;;
   *) echo "Unknown option or test selector '$1'"; exit 1;;
  esac
  shift
done

# Find which optional facilities are available.

$sim ./pcre2test -C linksize >/dev/null
link_size=$?
if [ $link_size -lt 2 ] ; then
  echo "RunTest: Failed to find internal link size"
  exit 1
fi
if [ $link_size -gt 4 ] ; then
  echo "RunTest: Failed to find internal link size"
  exit 1
fi

# If it is possible to set the system stack size, arrange to set a value for
# test 2, which needs more than the even the Linux default when PCRE2 has been
# compiled by gcc with -fsanitize=address. When the compiler is clang, sanitize
# options require an even bigger stack for test 2, and an increased stack for
# some of the other tests.

$sim ./pcre2test -S 1 /dev/null /dev/null
if [ $? -eq 0 ] ; then
  if [ "$bigstack" = "" ] ; then
    test2stack="-S 16"
    defaultstack=""
  else
    test2stack="-S 1024"
    defaultstack="-S 64"
  fi
else
  test2stack=""
  defaultstack=""
fi

# All of 8-bit, 16-bit, and 32-bit character strings may be supported, but only
# one need be.

$sim ./pcre2test -C pcre2-8 >/dev/null
support8=$?
$sim ./pcre2test -C pcre2-16 >/dev/null
support16=$?
$sim ./pcre2test -C pcre2-32 >/dev/null
support32=$?

# \C may be disabled

$sim ./pcre2test -C backslash-C >/dev/null
supportBSC=$?

# Initialize all bitsizes skipped

test8=skip
test16=skip
test32=skip

# If no bitsize arguments, select all that are available

if [ "$arg8$arg16$arg32" = "" ] ; then
  if [ $support8 -ne 0 ] ; then
    test8=-8
  fi
  if [ $support16 -ne 0 ] ; then
    test16=-16
  fi
  if [ $support32 -ne 0 ] ; then
    test32=-32
  fi

# Otherwise, select requested bit sizes

else
  if [ "$arg8" = yes ] ; then
    if [ $support8 -eq 0 ] ; then
      echo "Cannot run 8-bit library tests: 8-bit library not compiled"
      exit 1
    fi
    test8=-8
  fi
  if [ "$arg16" = yes ] ; then
    if [ $support16 -eq 0 ] ; then
      echo "Cannot run 16-bit library tests: 16-bit library not compiled"
      exit 1
    fi
    test16=-16
  fi
  if [ "$arg32" = yes ] ; then
    if [ $support32 -eq 0 ] ; then
      echo "Cannot run 32-bit library tests: 32-bit library not compiled"
      exit 1
    fi
    test32=-32
  fi
fi

# UTF support is implied by Unicode support, and it always applies to all bit
# sizes if both are supported; we can't have UTF-8 support without UTF-16 or
# UTF-32 support.

$sim ./pcre2test -C unicode >/dev/null
utf=$?

# When JIT is used with valgrind, we need to set up valgrind suppressions as
# otherwise there are a lot of false positive valgrind reports when the
# the hardware supports SSE2.

jitopt=
$sim ./pcre2test -C jit >/dev/null
jit=$?
if [ $jit -ne 0 -a "$nojit" != "yes" ] ; then
  jitopt=-jit
  if [ "$valgrind" != "" ] ; then
    vjs="--suppressions=$testdata/valgrind-jit.supp"
  fi
fi

# If no specific tests were requested, select all. Those that are not
# relevant will be automatically skipped.

if [ $do0  = no -a $do1  = no -a $do2  = no -a $do3  = no -a \
     $do4  = no -a $do5  = no -a $do6  = no -a $do7  = no -a \
     $do8  = no -a $do9  = no -a $do10 = no -a $do11 = no -a \
     $do12 = no -a $do13 = no -a $do14 = no -a $do15 = no -a \
     $do16 = no -a $do17 = no -a $do18 = no -a $do19 = no -a \
     $do20 = no -a $do21 = no -a $do22 = no -a $do23 = no \
   ]; then
  do0=yes
  do1=yes
  do2=yes
  do3=yes
  do4=yes
  do5=yes
  do6=yes
  do7=yes
  do8=yes
  do9=yes
  do10=yes
  do11=yes
  do12=yes
  do13=yes
  do14=yes
  do15=yes
  do16=yes
  do17=yes
  do18=yes
  do19=yes
  do20=yes
  do21=yes
  do22=yes
  do23=yes
fi

# Handle any explicit skips at this stage, so that an argument list may consist
# only of explicit skips.

for i in $skip; do eval do$i=no; done

# Show which release and which test data

echo ""
echo PCRE2 C library tests using test data from $testdata
$sim ./pcre2test /dev/null
echo ""

for bmode in "$test8" "$test16" "$test32"; do
  case "$bmode" in
    skip) continue;;
    -16)  if [ "$test8$test32" != "skipskip" ] ; then echo ""; fi
          bits=16; echo "---- Testing 16-bit library ----"; echo "";;
    -32)  if [ "$test8$test16" != "skipskip" ] ; then echo ""; fi
          bits=32; echo "---- Testing 32-bit library ----"; echo "";;
    -8)   bits=8; echo "---- Testing 8-bit library ----"; echo "";;
  esac

  # Test 0 is a special test. Its output is not checked, because it will
  # be different on different hardware and with different configurations.
  # Running this test just exercises the code.

  if [ $do0 = yes ] ; then
    echo $title0
    echo '/abc/jit,memory' >testSinput
    echo '   abc' >>testSinput
    echo '' >testtry
    checkspecial '-C'
    checkspecial '--help'
    checkspecial '-S 1 -t 10 testSinput'
    echo "  OK"
  fi

  # Primary non-UTF test, compatible with JIT and all versions of Perl >= 5.8

  if [ $do1 = yes ] ; then
    echo $title1
    for opt in "" $jitopt; do
      $sim $valgrind ${opt:+$vjs} ./pcre2test -q $defaultstack $bmode $opt $testdata/testinput1 testtry
      checkresult $? 1 "$opt"
    done
  fi

  # PCRE2 tests that are not Perl-compatible: API, errors, internals

  if [ $do2 = yes ] ; then
    echo $title2 "(excluding UTF-$bits)"
    for opt in "" $jitopt; do
      $sim $valgrind ${opt:+$vjs} ./pcre2test -q $test2stack $bmode $opt $testdata/testinput2 testtry
      if [ $? = 0 ] ; then
        checkresult $? 2 "$opt"
      else
        echo " "
        echo "** Test 2 requires a lot of stack. If it has crashed with a"
        echo "** segmentation fault, it may be that you do not have enough"
        echo "** stack available by default. Please see the 'pcre2stack' man"
        echo "** page for a discussion of PCRE2's stack usage."
        echo " "
        exit 1
      fi
    done
  fi

  # Locale-specific tests, provided that either the "fr_FR", "fr_CA", "french"
  # or "fr" locale is available. The first two are Unix-like standards; the
  # last two are for Windows. Unfortunately, different versions of the French
  # locale give different outputs for some items. This test passes if the
  # output matches any one of the alternative output files.

  if [ $do3 = yes ] ; then
    locale=

    # In some environments locales that are listed by the "locale -a"
    # command do not seem to work with setlocale(). Therefore, we do
    # a preliminary test to see if pcre2test can set one before going
    # on to use it.

    for loc in 'fr_FR' 'french' 'fr' 'fr_CA'; do
      locale -a | grep "^$loc\$" >/dev/null
      if [ $? -eq 0 ] ; then
        echo "/a/locale=$loc" | \
          $sim $valgrind ./pcre2test -q $bmode | \
            grep "Failed to set locale" >/dev/null
        if [ $? -ne 0 ] ; then
          locale=$loc
          if [ "$locale" = "fr_FR" ] ; then
            infile=$testdata/testinput3
            outfile=$testdata/testoutput3
            outfile2=$testdata/testoutput3A
            outfile3=$testdata/testoutput3B
          else
            infile=test3input
            outfile=test3output
            outfile2=test3outputA
            outfile3=test3outputB
            sed "s/fr_FR/$loc/" $testdata/testinput3 >test3input
            sed "s/fr_FR/$loc/" $testdata/testoutput3 >test3output
            sed "s/fr_FR/$loc/" $testdata/testoutput3A >test3outputA
            sed "s/fr_FR/$loc/" $testdata/testoutput3B >test3outputB
          fi
          break
        fi
      fi
    done

    if [ "$locale" != "" ] ; then
      echo $title3 "(using '$locale' locale)"
      for opt in "" $jitopt; do
        $sim $valgrind ${opt:+$vjs} ./pcre2test -q $defaultstack $bmode $opt $infile testtry
        if [ $? = 0 ] ; then
          case "$opt" in
            -jit) with=" with JIT";;
            *)    with="";;
          esac
          if $cf $outfile testtry >teststdout || \
             $cf $outfile2 testtry >teststdout || \
             $cf $outfile3 testtry >teststdout
          then
            echo "  OK$with"
          else
            echo "** Locale test did not run successfully$with. The output did not match"
            echo "   $outfile, $outfile2 or $outfile3."
            echo "   This may mean that there is a problem with the locale settings rather"
            echo "   than a bug in PCRE2."
            exit 1
          fi
        else exit 1
        fi
      done
    else
      echo "Cannot test locale-specific features - none of the 'fr_FR', 'fr_CA',"
      echo "'fr' or 'french' locales can be set, or the \"locale\" command is"
      echo "not available to check for them."
      echo " "
    fi
  fi

  # Tests for UTF and Unicode property support

  if [ $do4 = yes ] ; then
    echo ${title4A}-${bits}${title4B}
    if [ $utf -eq 0 ] ; then
      echo "  Skipped because UTF-$bits support is not available"
    else
      for opt in "" $jitopt; do
        $sim $valgrind ${opt:+$vjs} ./pcre2test -q $defaultstack $bmode $opt $testdata/testinput4 testtry
        checkresult $? 4 "$opt"
      done
    fi
  fi

  if [ $do5 = yes ] ; then
    echo ${title5A}-${bits}$title5B
    if [ $utf -eq 0 ] ; then
      echo "  Skipped because UTF-$bits support is not available"
    else
      for opt in "" $jitopt; do
        $sim $valgrind ${opt:+$vjs} ./pcre2test -q $defaultstack $bmode $opt $testdata/testinput5 testtry
        checkresult $? 5 "$opt"
      done
    fi
  fi

  # Tests for DFA matching support

  if [ $do6 = yes ] ; then
    echo $title6
    $sim $valgrind ./pcre2test -q $defaultstack $bmode $testdata/testinput6 testtry
    checkresult $? 6 ""
  fi

  if [ $do7 = yes ] ; then
    echo ${title7A}-${bits}$title7B
    if [ $utf -eq 0 ] ; then
      echo "  Skipped because UTF-$bits support is not available"
    else
      $sim $valgrind ./pcre2test -q $defaultstack $bmode $opt $testdata/testinput7 testtry
      checkresult $? 7 ""
    fi
  fi

  # Test of internal offsets and code sizes. This test is run only when there
  # is UTF/UCP support. The actual tests are mostly the same as in some of the
  # above, but in this test we inspect some offsets and sizes. This is a
  # doublecheck for the maintainer, just in case something changes unexpectely.
  # The output from this test is different in 8-bit, 16-bit, and 32-bit modes
  # and for different link sizes, so there are different output files for each
  # mode and link size.

  if [ $do8 = yes ] ; then
    echo $title8
    if [ $utf -eq 0 ] ; then
      echo "  Skipped because UTF-$bits support is not available"
    else
      $sim $valgrind ./pcre2test -q $defaultstack $bmode $testdata/testinput8 testtry
      checkresult $? 8-$bits-$link_size ""
    fi
  fi

  # Tests for 8-bit-specific features

  if [ "$do9" = yes ] ; then
    echo $title9
    if [ "$bits" = "16" -o "$bits" = "32" ] ; then
      echo "  Skipped when running 16/32-bit tests"
    else
      for opt in "" $jitopt; do
        $sim $valgrind ${opt:+$vjs} ./pcre2test -q $defaultstack $bmode $opt $testdata/testinput9 testtry
        checkresult $? 9 "$opt"
      done
    fi
  fi

  # Tests for UTF-8 and UCP 8-bit-specific features

  if [ "$do10" = yes ] ; then
    echo $title10
    if [ "$bits" = "16" -o "$bits" = "32" ] ; then
      echo "  Skipped when running 16/32-bit tests"
    elif [ $utf -eq 0 ] ; then
      echo "  Skipped because UTF-$bits support is not available"
    else
      for opt in "" $jitopt; do
        $sim $valgrind ${opt:+$vjs} ./pcre2test -q $defaultstack $bmode $opt $testdata/testinput10 testtry
        checkresult $? 10 "$opt"
      done
    fi
  fi

  # Tests for 16-bit and 32-bit features. Output is different for the two widths.

  if [ $do11 = yes ] ; then
    echo $title11
    if [ "$bits" = "8" ] ; then
      echo "  Skipped when running 8-bit tests"
    else
      for opt in "" $jitopt; do
        $sim $valgrind ${opt:+$vjs} ./pcre2test -q $defaultstack $bmode $opt $testdata/testinput11 testtry
        checkresult $? 11-$bits "$opt"
      done
    fi
  fi

  # Tests for 16-bit and 32-bit features with UTF-16/32 and UCP support. Output
  # is different for the two widths.

  if [ $do12 = yes ] ; then
    echo $title12
    if [ "$bits" = "8" ] ; then
      echo "  Skipped when running 8-bit tests"
    elif [ $utf -eq 0 ] ; then
      echo "  Skipped because UTF-$bits support is not available"
    else
      for opt in "" $jitopt; do
        $sim $valgrind ${opt:+$vjs} ./pcre2test -q $defaultstack $bmode $opt $testdata/testinput12 testtry
        checkresult $? 12-$bits "$opt"
      done
    fi
  fi

  # Tests for 16/32-bit-specific features in DFA non-UTF modes

  if [ $do13 = yes ] ; then
    echo $title13
    if [ "$bits" = "8" ] ; then
      echo "  Skipped when running 8-bit tests"
    else
      $sim $valgrind ./pcre2test -q $defaultstack $bmode $testdata/testinput13 testtry
      checkresult $? 13 ""
    fi
  fi

  # Tests for DFA UTF and UCP features. Output is different for the different widths.

  if [ $do14 = yes ] ; then
    echo $title14
    if [ $utf -eq 0 ] ; then
      echo "  Skipped because UTF-$bits support is not available"
    else
      $sim $valgrind ./pcre2test -q $defaultstack $bmode $opt $testdata/testinput14 testtry
      checkresult $? 14-$bits ""
    fi
  fi

  # Test non-JIT match and recursion limits

  if [ $do15 = yes ] ; then
    echo $title15
    $sim $valgrind ./pcre2test -q $defaultstack $bmode $testdata/testinput15 testtry
    checkresult $? 15 ""
  fi

  # Test JIT-specific features when JIT is not available

  if [ $do16 = yes ] ; then
    echo $title16
    if [ $jit -ne 0 ] ; then
      echo "  Skipped because JIT is available"
    else
      $sim $valgrind ./pcre2test -q $defaultstack $bmode $testdata/testinput16 testtry
      checkresult $? 16 ""
    fi
  fi

  # Test JIT-specific features when JIT is available

  if [ $do17 = yes ] ; then
    echo $title17
    if [ $jit -eq 0 -o "$nojit" = "yes" ] ; then
      echo "  Skipped because JIT is not available or nojit was specified"
    else
      $sim $valgrind $vjs ./pcre2test -q $defaultstack $bmode $testdata/testinput17 testtry
      checkresult $? 17 ""
    fi
  fi

  # Tests for the POSIX interface without UTF/UCP (8-bit only)

  if [ $do18 = yes ] ; then
    echo $title18
    if [ "$bits" = "16" -o "$bits" = "32" ] ; then
      echo "  Skipped when running 16/32-bit tests"
    else
      $sim $valgrind ./pcre2test -q $defaultstack $bmode $testdata/testinput18 testtry
      checkresult $? 18 ""
    fi
  fi

  # Tests for the POSIX interface with UTF/UCP (8-bit only)

  if [ $do19 = yes ] ; then
    echo $title19
    if [ "$bits" = "16" -o "$bits" = "32" ] ; then
      echo "  Skipped when running 16/32-bit tests"
    elif [ $utf -eq 0 ] ; then
      echo "  Skipped because UTF-$bits support is not available"
    else
      $sim $valgrind ./pcre2test -q $defaultstack $bmode $testdata/testinput19 testtry
      checkresult $? 19 ""
    fi
  fi

  # Serialization tests

  if [ $do20 = yes ] ; then
    echo $title20
    $sim $valgrind ./pcre2test -q $defaultstack $bmode $testdata/testinput20 testtry
    checkresult $? 20 ""
  fi

  # \C tests without UTF - DFA matching is supported

  if [ "$do21" = yes ] ; then
    echo $title21
    if [ $supportBSC -eq 0 ] ; then
      echo "  Skipped because \C is disabled"
    else
      for opt in "" $jitopt -dfa; do
        $sim $valgrind ${opt:+$vjs} ./pcre2test -q $defaultstack $bmode $opt $testdata/testinput21 testtry
        checkresult $? 21 "$opt"
      done
    fi
  fi

  # \C tests with UTF - DFA matching is not supported for \C in UTF mode

  if [ "$do22" = yes ] ; then
    echo $title22
    if [ $supportBSC -eq 0 ] ; then
      echo "  Skipped because \C is disabled"
    elif [ $utf -eq 0 ] ; then
      echo "  Skipped because UTF-$bits support is not available"
    else
      for opt in "" $jitopt; do
        $sim $valgrind ${opt:+$vjs} ./pcre2test -q $defaultstack $bmode $opt $testdata/testinput22 testtry
        checkresult $? 22-$bits "$opt"
      done
    fi
  fi

  # Test when \C is disabled

  if [ "$do23" = yes ] ; then
    echo $title23
    if [ $supportBSC -ne 0 ] ; then
      echo "  Skipped because \C is not disabled"
    else
      $sim $valgrind ${opt:+$vjs} ./pcre2test -q $defaultstack $bmode $opt $testdata/testinput23 testtry
      checkresult $? 23 ""
    fi
  fi

# End of loop for 8/16/32-bit tests
done

# Clean up local working files
rm -f testSinput test3input testsaved1 testsaved2 test3output test3outputA test3outputB teststdout teststderr testtry

# End