Just a bunch of rewriting descriptions and some arguments.
Most arguments here are uncompleteable, and most of these options will
never be used.
[ci skip]
NetBSD's man is unusual in that it doesn't understand an empty
$MANPATH component as "the system man path", and doesn't have a
`manpath` or `man --path`.
It has a `-m` option that would be useful, but other mans also have a
`-m` option that isn't, so detecting it is tough.
It does have a `-p` option that almost does what one would want here,
so we hack around it to make things work.
Fixes#5657.
[ci skip]
It turns out the default gettext on the sunny operating system with
the many names interprets at least `\n` itself, so we'd end up
swallowing it.
This allows us to move past the interactive tests and onto the expect
ones.
See #5472.
Matches upstream path_helper which is invoked in /etc/profile and only
applies to login shells. Enables running interactive, non-login shells
with altered PATH values.
Reverts change in c0f832a7, which reverts change in adbaddf.
These are files with staged modifications, and additional unstaged
ones.
In practice what happened was that you ran
git add somefile
then editted it some more and tried to
git add <TAB>
which didn't offer it anymore.
Now, we offer it if either modified or modified-staged is set.
Currently modified-staged isn't ever set alone, but through
all-staged, so we still need to keep offering the file then.
(This shows that the current switch/case might have some holes)
Fixes#5648.
[ci skip]
This exposes it more, since it's quite an important function.
We should do the same with the other vcs functions.
We leave a compatibility shim in place for now.
I hope this is now complete.
Also, shorten enough descriptions to make `string match --<TAB>`
show a two column pager with 80 cols.
We really should have shown more retraint in the design of `string`,
not all of the flags required both a long and short option created.
300ms was waaay too long, and even 100ms wasn't necessary.
Emacs' evil mode uses 10ms (0.01s), so let's stay a tad higher in case
some terminals are slow.
If anyone really wants to be able to type alt+h with escape, let them
raise the timeout.
Fixes#3904.
Prior to this fix, we would write to a fifo via cat >$filename & .
However in some cases (and soon in all cases) we open the file before
the fork, not after. This results in a deadlock because the file open
cannot succeed until a write begins.
Switch to using tee to write to the file. Because tee opens the file itself,
fish is no longer responsible and the deadlock is resolved.
Prior to this fix, we would write to a fifo via cat >$filename & .
However in some cases (and soon in all cases) we open the file before
the fork, not after. This results in a deadlock because the file open
cannot succeed until a write begins.
Switch to using tee to write to the file. Because tee opens the file itself,
fish is no longer responsible and the deadlock is resolved.
* brew.fish: Add `update-reset` subcommand
This command resets all tap's remotes to the latest available upstream. Ideal for debugging before reporting bugs or just housekeeping.
Add missing newlines.
* Add `brew.fish` changes to CHANGELOG.md
We were checking for the $TMUX variable to determine if we were
running under tmux. However when running the tests, the terminal becomes
expect, even though the TMUX variable is still set, so we spew tmux-isms
at expect. Check the value of $TERM for 'screen'.
This allows disabling _just_ the informative status.
We still also use the dirty and untracked variables, but only if
informative status hasn't explicitly been enabled.
If either of the two git config variables:
- bash.showDirtyState
- bash.showUntrackedFiles
is explicitly set to false, we will disable informative status, and
fall back on the non-informative version (most likely still with
either dirty or untracked files, since we already use the variables
for that).
These vars are read by the official git prompt, so we use them instead
of inventing our own "fish.showInformativeStatus".
(Note: This also uses $__fish_git_prompt_showdirtystate and friends,
but only when there's nothing set in the repo, and there's really no
reason to set those to false if using the informative status)
Fixes#5551.
[ci skip]
Expands the utility of `type -p foo` by allowing it to print the path to
the script that defines `foo` when `foo` is a valid function that was
sourced from a path on disk (rather than interactively defined).
This does not change the behavior of `type -P`/`type --force-path`,
which should have already been used if the desire was to resolve the
path to an executable file (otherwise the output would have been blank
if a function was shadowing an executable file of the same namea), so no
backwards compatibility issues are expected.
Don't do it when the relative path is simple (purely descending),
unless the token starts with ":/".
Also stop offering directories - if they need to be disambiguated, the
normal completion logic will take care of that.
Fixes#5574.
[ci skip]
Previously, using special regex characters or slashes would result in an
error message, when pressing tab in a command-line such as
"man /usr/bin/time ".
shorter descriptions that can fit in a terminal window, and option arguments added.
hide one option that is only functional on Cygwin unless we are on Cygwin
Make it so that the generated completion has the form \t\n
when the optional description has been ommitted - otherwise
the original option's description gets inherited and is seen hundreds
of times repeating in the pager.
GNU ls's --indicator-style=classify is the same as POSIX -F.
Refactor and change command testing logic so that we define the
function in the same place for all platforms, and use -F on all
the platforms when stdout is a TTY.
Our weird %-expanding function wrappers around kill et all defined
"--wraps" for the same name.
As it turns out, fish follows that one, and executes the completion
multiple times.
I didn't notice because these tend to be rather quick on linux, but on
macOS that's apparently a real issue.
Fixes#5541.
[ci skip]
On `set fish_color_cwd <TAB>`, a bunch of named colors are
shown in the pager. Each and every one has a description of "Color".
These are all very obviously colors, and none are not colors,
the description does not tell us anything specific about the item.
Descriptions in situations like this are actually a hinderance
because of the way they cause less to fit into the pager. Remove it
Some $TERMs like tmux and linux use an sgr0 ("reset") value that ends
in \co instead of "m". We need to adjust our regex here to catch that,
or we'd miscount lines with it.
This broke when --preset was introduced.
We allow a "--preset" or "--user" to appear right after the "bind",
and save the value, but don't use it yet.
Fixes#5534.
[ci skip]
A person stuck installing it just for fish on their server
doesn't want to waste time installing the wrong one, so assuage that.
Also tweak to look nicer with 80 columns
As discussed in #5492, it would be good if running fish_config without
Python actually told the user to install Python.
Further, let's give the person some hints on how to configure these
things by hand, since they may have to.
This was an oversight from the previous commit. Not that it matters
much, because we already removed $files.
Still, this would fail if someone defined a global $files, so let's fix it.
[ci skip]
We can't complete these, and now the user can do
```
set -g __fish_git_alias_$alias $command
```
e.g.
```
set -g __fish_git_alias_co checkout
```
if the arguments in the alias end up going to `git alias`.
Fixes#5412.
[ci skip]
This enables fuzzy-matching outside of the current directory again.
As it turns out, the performance impact here isn't as large as I
thought - it's massively dependent on caching.
Fixes#5476.
Which is 4, apparently.. (builtin_set.cpp returns ENV_NOT_FOUND)
here. This was previously hardcoded to our 121, which used to be
what builtins used for invalid arguments.
4 is pretty arbitrary but at least this is more consistent.
I had previously introduced a lot of updates and fixes to npm registry
based completions for `yarn` but hadn't ported them to `npm` as well
(although they can be dropped in as-is). This patch shares the code
between the two, which resides in an explicitly sourced multi-function
fish script.
The informational message is only shown the first time an attempt at
completing `yarn add` is made per session. This should vastly improve
the discoverability of this feature as regular yarn/npm users would
never have `all-the-package-names` installed normally.
Starting with Fedora 30 and RHEL 8, ambiguous python shebangs will now
throw errors during the RPM build process instead of just warnings,
since these systems have moved to Python 3 by default, and Python 2 may
not be available in the future.
See [this
page](https://fedoraproject.org/wiki/Changes/Make_ambiguous_python_shebangs_error)
for more details.
Drop these shebangs as the scripts are only ever called from fish
wrappers.
This checks if uname exists (we already call it elsewhere without
check, nobody has complained, uname is in POSIX), then calls to see if
it's "Linux", and only then offers any completions.
Since we don't have any other version to offer, the check is worse
than useless.
* Severely extended the sorin theme
This theme should now mostly match the original.
* Removed superfluous whitespace
* Inlined external links as ASCII art
* Made myself the author of the sorin theme
* Removed superfluous read delemiter
* Renamed __fish_git_action to fish_print_git_action
* Adde a minor comment
Cleaned up the code to no longer replicate in fishscript what fish
already does (and caches to boot) in C++ in setting up the paths to the
user configuration directory.
Also introduced a `$__fish_user_data_dir` instead of the sporadic
definitions of `$userdatadir` that may or may not go through
`XDG_DATA_HOME`.
I spent some time figuring out $TERM_PROGRAM_VERSION and Terminal.app's
capabilities over time. [1]
Only use OSC 7 if running on the version of Terminal.app that added it
or newer. In the past this would have been harder because `test` couldn't
do float comparisons.
cleanup:
Don't bother setting a local $TERM_PROGRAM if it's unset: quoting
is enough to keep test happy. For the version numbers, 0"$var" is safe
against unset variables for numerical comparisons.
[1]: https://github.com/fish-shell/fish-shell/wiki/Terminal.app-characteristics
Instead of maybe adding "-s" and "-M" if "-s" hasn't already been
given, just add "-s" to _every_ bind invocation, and "-M" to those who
need it.
Fixes#5028.
Largely reverts 007d794b6e.
fish_indent is extremely resource-intensive on large inputs and can crash; it also does not handle
invalid characters gracefully.
Work on #5402.
The solarized themes now define pager colors, while other schemes
don't.
So if a user picks one of them, and then another, they'd keep the
pager colors.
Instead, since the default theme is now complete, any theme that does
not define its own pager colors will always get the default ones.
[ci skip]
This was missing a bunch of variables from __fish_config_interactive.
Ideally we wouldn't have to duplicate this info, but I don't have a
great solution either.
This removes ~140ms from every single prompt.
When not in a git repo, this prompt now takes ~9ms, as opposed to
~150ms before.
Fixes#5266 harder.
[ci skip]
This is quite ugly, but in lieu of putting in a proper ansi
parser (i.e. the output part of a terminal), since this is the only
such sequence we have seen until now, let's just match it.
Fixes#5312.
[ci skip]
- Remove use of `eval`
- Use `git rev-parse` instead of `git status` as its faster,
- especially in large repos. (in qt5: 600ms vs 1ms)
- Use return status instead of test -n
This should change nothing about the output.
This uses some more string, but the main improvement is using "git
rev-list" instead of parsing "git branch" output that happens to be localized.
[ci skip]
I can't see the value in this, given that we have a bunch of minimalist ones.
The "escaping" here is gnarly enough that I don't want to attempt to clean it up.
man.fish can be clarified a bit, by removing a superfluous early return. Additionally, performance can be
(ever so slightly) improved, by using the empty string to suffix an extra colon when `$MANPATH` is empty, as
described in `manpath(1)`. As `man` will internally call `manpath` as it starts, this eliminates a redundancy.
This adds the color variables from the docs to both the python script
and the js controller.
Among others, this includes "search_match", i.e.
"fish_color_search_match".
It still does not include the pager colors because the variable names
wouldn't match.
