Commit 09685c3682 tried making the apt
completions faster by doing two things:
1. Introduce a limiting "head"
2. Re-replace our "string" usage with tr
Unfortunately, in doing so it introduced a few issues:
1. The "tr" had a dangling "+" so it cut apart package
descriptions that contained a "+".
This caused e.g. "a C++ library" to generate another completion
candidate, "library".
2. In reusing "tr" it probably reintroduced #8575,
as tr is not 8-bit-clean.
3. It filtered too early, on the raw apt-cache output,
which caused it to fill up with long descriptions.
So e.g. for "texlive" it would only generate 10 completions,
where it should have matched 54 packages.
Because most of the speedup is in the "head" stopping early, we
instead go back to the old string way, but introduce a limiting "head"
after the "sed" (which will have removed everything but the package
name line and the first line of the description)
In my tests this is about ~10% slower than doing head early and using
tr, but it's more correct.
Admittedly I haven't been able to reproduce the 35s scenario that
09685 talks about, but the most likely cause of that is *apt-cache*
being slow - I don't see how string can be that much slower on another
system - and so it will most likely also be fixed by doing head here.
Future possibilities here include:
1. Using "apt-cache search --names-only", which gives a much nicer
format (but only for non-installed packages - the search strings are
apparently ANDed?)
2. Switching to `string split`, possibly using NUL and using `string
split0`?
3. Introducing a `string --null-in` switch so we can get by with one
`string`
4. (multi-threaded execution so the `string`s run in parallel)
`apt-cache` is just so incredibly slow that filtering against the final results
just doesn't cut it. Attempting to match against 'ac.*' (already taking
advantage of changing short search terms into prefix-only matches) would take
35 seconds, all of bottlenecked before the filtering step. This change uses more
of a heuristic to filter `apt-cache` results directly (before additional
filtering) to speed things up.
A variety of different limits from 100 to 5000 were timed and their result sets
compared to see what ended up artificially limiting valid completions vs what
took too long to be considered functional/usable and this is where we ended up.
`gh` doesn't write its errors to stderr and doesn't exit with a non-zero status
code in case of failure. The completions are short enough that buffering them
isn't a huge deal.
This cuts down `__fish_git_using_command` calls from 75 to 68, saving
some time in the common case.
(it would be possible to remove the check from
`__fish_git_stash_using_command` now, but that's brittle and it's one
call, so it's not a big issue)
* Replace ";" with "\n" in alias-generated functions
This can let us add a "#" in our aliases to make
them ignore additional arguments.
* Update changelog about aliases that ignore arguments
* Update test for alias.fish
This is now compliant with the aliases that can
ignore arguments.
This used a prompt command, but since the prompt was interpolated and
included a `?` it would be run as a glob without qmark-noglob.
Since it's simpler to pass a prompt string, just do that.
This checked the locale, but did so in a way that's fundamentally
broken:
1. $LANG isn't the only variable ($LC_ALL and $LC_CTYPE)
2. Even if $LANG is set that doesn't mean it's actually working
We could add a `status is-multibyte` here to figure out if we have a
multibyte locale?
But instead, since this is dealing with adding an ellipsis, let's just
add it to `string ellipsize`.
One slight difference is that shortening the branch now counts the ellipsis width.
I.e. assuming the branch is "long-branch-name"
```fish
set -g __fish_git_prompt_shorten_branch_len 8
```
might now print "long-br…" instead of "long-bra…". This is nicer because we can now give the actual maximum width.
The alternative is to add a "--exclusive" option to "string ellipsize" that doesn't count the ellipsis width. So `string ellipsize --char "..." --max 8" long-branch-name` might result in "long-bra...", which is 11 wide.
This is essentially the inverse of `string pad`.
Where that adds characters to get up to the specified width,
this adds an ellipsis to a string if it goes over a specific maximum width.
The char can be given, but defaults to our ellipsis string.
("…" if the locale can handle it and "..." otherwise)
If the ellipsis string is empty, it just truncates.
For arguments given via argv, it goes line-by-line,
because otherwise length makes no sense.
If "--no-newline" is given, it adds an ellipsis instead and removes all subsequent lines.
Like pad and `length --visible`, it goes by visible width,
skipping recognized escape sequences, as those have no influence on width.
The default target width is the shortest of the given widths that is non-zero.
If the ellipsis is already wider than the target width,
we truncate instead. This is safer overall, so we don't e.g. move into a new line.
This is especially important given our default ellipsis might be width 3.
pipenv switched from older click-completion package to new built-in completions
from click framework in v2021.11.9.
This command achieves compatibility with both, older and more recent versions.
`cargo search` can be used to quickly get crates matching a search string, so we
can pass the current token for first-arg completions to `cargo add` and `cargo
install` to `cargo search` to look up matches.
`cargo search` doesn't restrict itself to (nor prioritize for) prefix matches,
while fish will only display prefix matches (for dynamically generated
completions) so it's perfectly possible for `cargo search foo` to return 20
results none of which will successfully result in a completion, but for a
further-narrowed completion of `cargo install foob^I" to then result in
completions because `cargo search` ended up returning a prefix match for `foob`
while it didn't for `foo`.
The only other oob cargo subcommand that takes a crate name (that isn't the name
of a crate specified in `Cargo.toml`) is `cargo search` but there's no point in
providing completions to that... I think (it's possible to search for crate
"foo" in order to get its latest version number rather than its name, but I'm
not sure that's worth supporting).
This expands completions of `cargo^I` to list any commands named `cargo-xxx` as
cargo subcommands invokable as `cargo xxx` in addition to the default oob
subcommands cargo ships with.
(This is very similar to how git allows users to shim their own subcommands.)
NOTE: This would stay even after cargo someday moves to clap and generates or
even ships/installs an official machine-generated `cargo.fish` completions
script.
The old way of generating cargo completions no longer work, so we need
to manually maintain the completions until clap completions support[1].
[1]: https://github.com/clap-rs/clap/issues/3166
This used `realpath -eq`, which for GNU realpath:
1. Suppresses "most error messages" (-q)
2. Requires that all parts exist (rather than allowing the last not
to)
Since we don't actually need a real path here, just filter.
Fixes#9099
* added completions for sad and added note in changelog
* ran fish_indent on completion file
* split -h and --help into two distinct completion options
This moves the stuff that creates skeleton/boilerplate files to
the same place we initialize uvars for the first time or on upgrade.
Being a bit less aggresssive here theoretically makes launch a little
lighter but really I personally just found it weird I couldn't
just delete my empty config.fish file without it getting recreated
and sourced every launch.
A recenty commit was loathe to assume the unicode ellipsis character
was safe so just used '..' instead. However I noticed we actually
already do use that character elsehwere in the completions.
So, just make both spots try to somewhat carefully use it.
We do this same `string match` check on LANG in fish_job_summary.fish
When adding a VLAN-enabled interface, it is named like enp0s31f6.100@enp0s31f6
with the physical interface being appended behind an @.
But subsequent ip commands operate on the interface name without this suffix,
so it needs to be removed when completing interface names in __fish_ip_device
These should be friendlier, but aren't as pedantically accurate.
I think the term "index" is terrible and much prefer "staging area".
Also "rev-parse" simply must be believed to be seen, it can't be
described in a single paragraph. (did you know you can use `git
rev-parse --parseopt` as a replacement for `getopt` in arbitrary
shell scripts?)
"socket.has_ipv6" is basically useless - it tells you python has
been *compiled* with ipv6 support.
Instead just try ipv6 and if that fails with EAFNOSUPPORT (checking
the actual errno), try v4.
Yes, I explicitly do not care to test this on python2.
Fixes#3857
I have an alias called "lg" for
log --color --graph --pretty=format:\'%Cred%h%Creset -%C(yellow)%d%Creset %s %Cgreen(%cr) %C(bold blue)<%an>%Creset\' --abbrev-commit --first-parent
Having that in my completions ensures that git commands essentially
always use one column at most. That's not great, so we now shorten it
to 35 chars (plus an annoying 2 for ".." because I can't be bothered
to check for unicode support - an argument for a "string ellipsize", I guess?)
