The recent improvements to multiline prompts and vi-mode in #3481 appear
to be sufficient to make iTerm2 well behaved, so remove our hack which
disabled it by default.
Fixes#3696
git versions that only support porcelain v1 output (like on CentOS 7,
which has 1.8.3) weren't completing files prefixed with : correctly iff
the name after the colon was also a valid relative path.
Fixes the tests on CentOS 7.
This removes the awkward secondary logic.
Note that we still ship a function called `__terlar_git_prompt`
because people who picked the prompt will still be calling it - we
don't update the prompt.
Git's pathspec system is kind of annoying:
> A pathspec that begins with a colon : has special meaning. In the short form, the leading colon : is followed by zero or more "magic signature" letters (which optionally is terminated by another colon :), and the remainder is the pattern to match against the path. The "magic signature" consists of ASCII symbols that are neither alphanumeric, glob, regex special characters nor colon. The optional colon that terminates the "magic signature" can be omitted if the pattern begins with a character that does not belong to "magic signature" symbol set and is not a colon.
So if we complete `:/foo`, that "works" because "f" is alphanumeric
and so the "/" is the only magic character here.
If, however the filename starts with a magic character, that's used as
a magic signature.
So we do what the docs say and terminate the magic signature after the
"/" (which means "from the repo root").
Fixes#9004
This makes it so
1. The informative status can work without showing untracked
files (previously it was disabled if bash.showUntrackedFiles was
false)
2. If untrackedfiles isn't explicitly enabled, we use -uno, so git
doesn't have to scan all the files.
In a large repository (like the FreeBSD ports repo), this can improve
performance by a factor of 5 or up.
Previously, `kill-whole-line` kills the line and its following
newline. This is insufficient when we are on the last line, because
it would not actually clear the line. The cursor would stay on the
line, which is not the correct behavior for bindings like `dd`.
Also, `cc` in vi-mode used `kill-whole-line`, which is not correct
because it should not remove any newlines. We have to introduce
another special input function (`kill-inner-line`) to fix this.
Arguments to --ignored were introduced in Git 2.16, from January 2018.
The git completions specifically work around this, allowing older
versions to be used; match this in the git prompt.
Fixes the tests on CentOS 7.
When switching this to use `git status`, I neglected to use the
correct definition of what a "dirty" and a "staged" change is.
So this now showed already staged files still as "dirty".
Fixes#8986
This adds a path builtin to deal with paths.
It offers the following subcommands:
filter to go through a list of paths and only print the ones that pass some filter - exist, are a directory, have read permission, ...
is as a shortcut for filter -q to only return true if one of the paths passed the filter
basename, dirname and extension to print certain parts of the path
change-extension to change the extension to a different one (as a string operation)
normalize and resolve to canonicalize the paths in various flavors
sort to sort paths, also only using the basename or dirname as a key
The definition of "extension" here was carefully considered and should line up with how extensions are actually used - ~/.bashrc doesn't have an extension, but ~/.conf.d does (".d").
These subcommands all compose well - they can read from arguments or stdin (like string), they can use null-delimited input or output (input is autodetected - if a NULL happens in the first PATH_MAX bytes it switches automatically).
It is both a failglob exception (so like set if a glob passed to it fails it just doesn't get any arguments for it instead of triggering an error), and passes output to command substitution buffers explicitly split (like string split0) so newlines are easy to handle.
The best effort parser over-eagerly strips all extensions off a manual
page file's basename, hence commands containing dots will output
completions for a different command.
Prominent examples are the mkfs.*(8) and fsck.*(8) families, e.g.
completions for mkfs.xfs.8.gz are generated for the command `mkfs`
is not only incorrect but can also filename collisions in case .fish
files for multiple commands are put into the same directory.
Thus do not strip everything past the first dot from the left, but
instead merely strip expected extensions from the right.
edit_command_buffer uses the "norm" command for moving the cursor to a column
with the "|" primitive. The problem is that the user can remap "|". Fix this
by using the "norm!" variant which ignores user mappings (see ":h norm").
Closes#8971
Previously, running `fish_add_path /foo /foo` would result in /foo
being added to $PATH twice.
Now we check that it hasn't already been given, so we skip the
second (and any further) occurence.
`wg show` command shows entire interfaces configuration, not just the
list. This breaks completion when running fish from root, because
command output looks like this:
interface: wg0
public key: fred2rX85AxpcTObLuiWTzkRPZaXjnhd1C4XOdZOGWs=
private key: (hidden)
listening port: 12345
fwmark: 0xca6c
peer: g2YHHDkxmgoT9EV0TxKtq556WLXpaOh4zgC5L7EAGTQ=
endpoint: 192.168.88.50:54321
allowed ips: 0.0.0.0/0, ::/0
latest handshake: 1 minute, 37 seconds ago
transfer: 1.83 MiB received, 927.19 KiB sent
To show just the list of active interfaces, `wg show interfaces` should
be used instead.
man-db's man 2.7 as shipped in OpenSUSE fails to set a non-zero
exit code when invoked like "man ls-some/dir". This means
that we fail to display the man page if the commandline is
"ls some/dir". Work around this by never treating tokens
with slashes as subcommand.
Because TAGs are easy to type and complete, but commits with its SHA are
difficult to complete manualy. Keep commits and TAGs order to show more recent
commits first.
Pressing Ctrl-D while a command is running results in a null key code in
our input queue. That key code is bound to insert a space (without expanding
abbreviations). Make it only insert a space if the commandline is non-empty,
to accommodate this use case.
This probably affects other keys as well.
Closes#8871
Whenever completing any git commandline, we invoke __fish_git_using_command
173 times*. Every invocation calls "commandline" and "argparse"
to the same effect. Let's parse the command line once, and reuse the results
later.
I'm observing a speed-up from 200ms to 120ms with
perf stat -r 10 buildrel/fish -c 'complete -C "git checkout ">/dev/null'
Alternative solutions:
1. teach fish to cache such things automatically.
2. rewrite git completions to compute most completions in a single function,
which will naturally avoid redundant work. This sounds viable but it's
a lot of work.
* we have a thousand uses of __fish_git_using_command, so I'm not sure why
it's only 173.
See the discussion in #8266
As we've noticed a few times now, mingw/msys/cygwin has a fairly
horrible kill implementation that annoys us here.
However our workaround wasn't enough - "mingw" is also a name that is
used here and "msys" can also be a substring.
Also we need to silence the `kill` because it's better to not list the
signals than it is to spew errors.
Fixes#8915.
Some terminals can be configured to send variuos escape sequences for keys
that could historically not be detected. Turns out some usage pattern rely
on those quirks.
Shift+Space is easy to mistype when wanting to insert a space (especially
when typing ALL CAPS). Map it to Space, to match user expectations.
Similarly for Control+Return, for which xterm can be configured to send
something other than \cr:
echo 'XTerm.vt100.modifyOtherKeys: 1' | xrdb && xterm
I'm working on a change to builtin bind that allows to bind CSI sequences via
human-readable key names (#3018) but for now let's just map the raw sequences.
Closes#8874
micro only parses the [FILE]:LINE:COL syntax
if the parsecursor option is enabed
in the meanwhile, the +LINE:COL syntax is unambiguous and always valid
You can use an index with vared, like `vared PATH[4]`. However this was
inadverently broken in fa2450db30, because you cannot use `read` to
modify an element of a variable, only the whole variable. Fix this.
Unfortunately this means using another local variable, so we name it
__fish_vared_temp_value instead of just temp so that collisions are
unlikely.
localectl may emit an error for whatever reason. The localectl
completion runs localectl in a command substitution so our stderr
redirect doesn't apply. Just redirect to null. Hopefully this fixes the
tests.
I *think* this is printing
> debconf: DbDriver "passwords" warning: could not open /var/cache/debconf/passwords.dat: Permission denied
On Github Actions?
Might need to adjust the test to store the output.
* Print message in set_fish_path -v when a path doesnt exist
* Update changelog
* Remove "; or continue"
* use printf instead of echo, avoid localizing the path
This is a follow-up to #8811, which fixed fish_config on newer versions of
Sailfish OS.
Using the previous method to open the fish_config URL on Sailfish OS worked
only on 4.4 (and 4.3 IIRC), but not on older OS versions. Opening the URL
using xdg-open works well with new and old OS version, and has been tested on
- Sony Xperia 10 II running SFOS 4.4 aarch64
- Sony Xperia XA2 Ultra running SFOS 4.4 armv7hl
- Sony Xperia X running SFOS 4.1 armv7hl
- Jolla Phone running SFOS 3.4 armv7hl
Closes#8872
* feat(completions): add sops completions
* fix: start descriptions with uppercase letter
* fix: shorten descriptions
* fix: use spaces instead of ;
* fix: typo
* feat: better option than __fish_is_first_token
* feat: improve __fish_sops_commands function
* fix: remove useless code
* fix: fix the second argument is not called
As explained in the parent commit, if we print things to the command line,
we move the cursor down before redrawing a multi-line prompt. This is a
workaround to avoid erasing what we printed.
We forgot to do add this workaround to fish_job_summary. When running
`sleep 1 &` with a multiline prompt, the job exit notification is immediately
overwritten (most of the time). This can be observed consistently on Linux
by waiting before redrawing:
diff --git a/share/functions/fish_job_summary.fish b/share/functions/fish_job_summary.fish
index a552fabbc..f457ee8e8 100644
--- a/share/functions/fish_job_summary.fish
+++ b/share/functions/fish_job_summary.fish
@@ -52,6 +52,7 @@ function fish_job_summary -a job_id is_foreground cmd_line signal_or_end_name si
string repeat \n --count=(math (count (fish_prompt)) - 1) >&2
if test $is_foreground -eq 0; and test $signal_or_end_name != STOPPED
+ sleep 1
commandline -f repaint
end
end
Move the cursor down to work around this. In future, we could avoid calling
fish_prompt. Also, this solution add an extra blank lines before the next
prompt. With a real fix, we could get rid of that. Even worse, sometimes
there are two blank lines instead of one (for a two-line prompt).
Fixes#8817
We have some key bindings that print directly to the terminal while the user
is still typing the command line. Thereafter, we redraw the command line,
so the user can resume typing. To redraw a multiline command line, we first
erase several lines above the cursor. To not erase the key bindings' output,
we move the cursor down that many lines.
Simplify the logic; no functional change.
This conditionally set a function variable in an unsafe way.
If you do something like
```fish
if condition
set -f foo bar
end
```
then, if the condition was false, $foo could still use a global variable.
In this case, alias would now fail if a variable $wraps was defined globally.
This reverts most of commit 14458682d9.
The message rewording can stay, it's *fine* (tho it'll break the
translations but then we'd need a real string freeze with a
translation team for those to be worth anything anyway, soo)
* completions/lxc: parse container names with numbers and other commands
* Revert CHANGELOG.rst
* Code Review: use multiple subcommands ability of __fish_seen_subcommand_from
git.fish loads git-foo.fish completions.
As reported in #8831, this can be slow when the user has run something like
complete git-foo -w 'git diff'
because git.fish runs 'complete -C "git-autofixup "' at load time.
Commit 09161761c (Complete custom "git-foo" commands from "git foo",
2021-01-24) did that to avoid adding filename completions for "git foo".
Drop that check.
This means that users who don't want filename completion for "git foo",
need to define at least one custom completion for "git-foo", like
complete git-foo -f
This was already apparently supposed to work, but didn't because we
just overrode errno again.
This now means that, if a correctly named candidate exists, we don't
start the command-not-found handler.
See #8804
-d has been removed in FreeBSD 13 & monterey
-t has also been removed from date(1)
-n has been "Obsolete flag, accepted and ignored for compatibility",
for a while, leave it out.
-R added for RFC 2822
-I added for ISO 8601
Some description changes
The tmp and prompt variables collide with variables used as arguments.
Just avoid them entirely, at the cost of making the internals of the
functions somewhat more complicated.
Closes#8836.
Otherwise this was 100% monospace.
But since we have a specific list of fonts that we have checked, let's
use the same list instead of just adding "Helvetica" again.
These printed an error on load if networkmanager isn't running.
Since at that point it's not useful to complete anything, just try the
first call and if that fails exit.
This tried migrating old abbreviations *twice* - once from the 2.3
scheme to the 2.4 one, and once from that to the 3.0 scheme.
Since this is purely for upgrading from fishes < 3.0, and basically
untested, let's remove it.
If anyone does that upgrade, they'll simply have to reexecute the abbrs.
Because we reload changed function files, a common issue on upgrading
to 3.4.0 is that fish_title causes errors.
So we simply use the oldschool syntax.
* New -n flag for string join command.
This is an argument that excludes empty result items. Fixes#8351
* New documentation for string-join.
The new argument --no-empty was added at string-join manpage.
* New completions for the new -n flag for string join.
* Remove the documentation of the new -n flag of string join0
The reason to remove this new argument in the join0 is that this flag basically doesn't make any difference in the join0.
* Refactor the validation for the string join.
The string join command was using the length of the argument, this commit changes the validation to use the empty function.
* Revert #4b56ab452
The reason for the revert is thath the build broke on the ubuntu in the Github actions.
* Revert #e72e239a1
The reason the compilation on GitHub broke is that the test was weird, it didn't even run it, Common CI systems are typically very very resource-constrained.
* Resolve conflicts in the string-join.rst.
* Resolve conflicts in the "string-join.rst".
commit #1242d0fd7 not fixed all conflicts.
This was an oversight in 7fb3880b96, and would have spewed the existing rustup completions if this file was sourced twice (which probably won't happen given autoloading, to be fair).
I have no idea why this kept one component in the one case and none in
the other.
Because we already aggressively shorten the command, we can keep the directory.
Since the color previews are now wider, we had quite a wide range
where there would only be one. Remove the border around the content
earlier so windows with 1000px width still get two previews in a row.
(making the text shorter would also be an option here)
This makes the container fit the content, otherwise we'd be cutting
off the "> quack &" part of the first line.
Also while we're here increase the line-height a bit to give it more
breathing room, and increase the font size juuust a smidge.
Reduce margins and increase padding to make it less cramped.
Some GPG options work only with private keys but our completions suggest all
keys. Modify `__fish_complete_gpg_user_id and __fish_complete_gpg_key_id`
to take an optional argument for the "key type" to override `--list-keys`
with like `--list-secret-keys` for the appropriate options.
Closes#8712
Helm 3 provides an autogenerated completion since version 3.4.0.
The previous implementation is replaced by this because it was specific to the
now-deprecated helm 2.
The completions appear to be fully featured including descriptions and
completion for dynamic arguments such as namespaces and releases.
Their names are not perfect, so let's keep them as internal functions,
until we figure out how/if we want to expose this.
This reverts 0445126c2 (Undunder __fish_is_nth_token, 2021-06-29) (but I
did it without "git revert").
Closes#8008
This patch adds completions for the values of properties, emitted once the
current token matches the name of a zfs property in full, for the various places
where such a property can be assigned.
e.g.
zfs set canmoun<TAB> continues to only provide "canmount" as a completion, but
zfs set canmount<TAB> will provide a list of all valid values for the property.
The existing code made an attempt to complete the values for the specific case
of `zfs set PROP=` but I could never get it to work for me under FreeBSD, so I
presume it was Linux-specific. This patch should be cross-platform and extends
the completions to anywhere where a property may be set.
The previous behavior vs the current (hopefully ideal) behavior:
* zpool attach [lists pools and devices - should list only pools]
* zpool attach tank [lists pools and devices - should list only devices already
part of pool "tank"]
* zpool attach tank da1 [lists pools and devices - should list only devices not
already part of pool "tank" or any pool, depending on -f flag to attach]
Completions may benefit from using these in tandem to dynamically generate
completions predicated on the value of an earlier token in a cleaner fashion.
(Currently, most of called completion helper functions introspect the command
line to get the value of an earlier argument, making them less reusable for
different expressions that need completions of the same type. This way, the
completion can provide the function with the argument value explicitly.)
As of FreeBSD 13 (released April 2021), FreeBSD has rebased its zfs support on
top of the OpenZFS distribution previously used only/chiefly by Linux;
accordingly, it has gained support for some previously Linux-only completions.
This patch changes some completions previously predicated on a Linux ZFS
installation to the presence of an OpenZFS installation. Note that there
continue to be (and probably always will be) separate Linux-only and
FreeBSD-only completions (and not just when it comes to interacting with the
device subsystem, etc).
Cursory experiments reveal that there are only three color options where
the background color is not ignored (though I didn't check all of them).
For these three options, the foreground color is ignored. Similar for
bold/italics/underline.
Teach set completions to only show the colors that won't be ignored.
Unrelated observation: we write
-a '--background=(set_color --print-colors)'
instead of
-l background -a '(set_color --print-colors)'
because we want all colors to show straight away (there are no other
meaningful arguments).
4b018a760 (set completions: add more special variables, fix colors, 2021-12-13)
changed a global variable to a local, which is no longer visible to this
function. Fix this, so "set LANG <TAB>" works again.
We detect one terminal (foot) with a "string match" command, and all others in a long "test"
command. Let's put the detection of each terminal on a new line. This should be easier to read
and change. It also allows to lose one level of indentation.
This takes the changes from 03b23dd1b6
and applies them to the .theme version as well.
(note: It's *possible* to just go through fish_config in future, but
we do not want to do that right now because that can have issues on
upgrade)
This was an undocumented undunderscored function that wouldn't be
super useful to actually use manually (because it still checked if the
variable was set!). It also relied on `__init_uvar`, which was only
set in `__fish_config_interactive`.
Additionally it didn't remove any complexity because this was all very
simple "do thing a, do thing b, do thing c" stuff. It added a layer of
indirection instead, and made fish startup dependent on another
function.
If you want to reset your colorscheme to the default, use fish_config.
Add completions that are correct on darwin and probably bsd.
Add missing -H, -L, -P completions to GNU chown.
Remove errant GNU completion claiming -h is short for --help.
The regex for task names was a bit off, so
- include uppercase letters, to support `TMessagesProj:assembleMiniRelease`
- don't include characters like `[]` (which happen to lie between ASCII `A` and `z`)
- include numbers, which are presumably valid in an identifier
- explicitly include the optional ` - ` bit in the regex
- Use named colors instead of hex values - not sure how this
happened in the first place, these all map to basic named colors.
- Reinitialize if these were last set on fish <3.4, new variables
have been added.
- Break this into a separate function for the sake of
__fish_config_interactive complexity, and allow for running
manually.
Remove some nonexistent options (my gcc does not know "-mdata"), fix
the longest description in all of fish and remove some argument
markers from the option.
This sets the variable to the background value of
$fish_color_search_match, which fixes the case where you switch from a
theme with a set selected background (like our default, now) to one without.
It's using GNU specific flags, which doesn't work on BSDs like macOS.
Instead this just formats the current time into
seconds and then the `math` builtin for calculating the 5 min timeout.
Unfortunately the normal font families like "sans-serif" and
"monospace" are basically broken because the browser defaults are
decades old.
TODO: Inline code is barely distinguishable.
GNU tr is not Unicode-aware, and was corrupting descriptions that had
non-ASCII characters.
Additionally, rather than using the Unicode private use characters, use
the ASCII/UTF-8 record separator character as it was intended.
The sed command could probably be rewritten to do all the heavy lifting
here, but would be even less readable.
Closes#8575.
Instead of weirdly smearing the color, simply increase the values
until they are bright enough.
This prevents /tmp from being white, and guarantees visible colors for
all directories.
fish_git_prompt may run certain git commands which may invoke certain
external programs as specified `.git/config`. Prevent this by suppressing
certain git config options.
The `name` attribute I used in commit f725cd402d
is undocumented, and [someone discovered] that it does not exist for one
possible browser on MacOS. This should make the code work correctly even in that case.
This probably doesn't currently cause a problem, at least when
`isMacOS10_12_5_OrLater()` is true, because of the ordering of the if
statements in the `runThing` function.
[someone discovered]: https://bugs.python.org/issue43424#msg409087
Git completions use wrapper function __fish_git instead of directly
running git. This allows them to be aware of Git's global options, like
--git-dir. Let's use __fish_git also for listing config keys & values,
so it can more accurately list local (= per repo) git configuration.
We don't provide completions on "git config " because we require
"fish_is_nth_token 3". Confusingly, fish_is_nth_token only counts
tokens *before* the cursor, so 2 is the right number here.
While at it, fix a typo and delete an unused completion entry (it
ran conditional on __fish_is_first_arg, which is always false for a
git subcommand).
This patch introduces basic completion of the -pl|--projects switch for
mvn. The implementation is quite naive but it's better than nothing. A more
robust implementation would require either scanning the filesystem or running
mvn which might slow down completion significantly.
This solution can be improved by using an XML parser instead of grep/sed.
This is a stop gap. Ideally setting a theme would be idempotent. You
set it, all colors change to match it, even the ones it does not
specify.
However, I do not believe we can *erase* colors that aren't set, and
we don't currently do so in the CLI version. So skip setting these at
all, for now.
If a color is mentioned but empty, it will be set to empty.
If the theme says "brgreen", that's what we want the variable to say
after.
This used to translate it through our palette, so it ended up as
00ff00, which isn't the same.
This still keeps the idea that colors that aren't in the palette are
better, and it does it in a slightly roundabout way (translate color
string to rgb string, see if the rgb string is a key in that
translation dictionary), but it should work for now.
* add --bold, --italics, all of them,
* and we add them as arguments so that they are do not
render like long options, they are just self-descriptive
literal strings in this context.
* solve an unneccessary global var.
Fixes#8518
Theoretically if this only includes simple characters, it won't cause
any issues. We already validate in other places but it doesn't hurt to
do this twice.
Now that we have modifiers and can have backgrounds and such, simply
setting it as css style doesn't cut it.
So let's stop validating for now, the worst that can happen is that
the color isn't rendered.
This just simply passed the "color" value, which is just the
foreground color string.
Instead, we pass the actual object back, with the modifiers as bools
and foreground/background separate.
Our themes don't use background a lot, except in the pager, so this
never really came up.
Use the remaining_to_disclose count to determine if all completions
are shown (allows consistent behavior between short and long completion
lists).
Closes#8485
Cargo subcommand extensions don't provide a description in `cargo --list`,
the regex used to filter this list ignored lines without a description.
This change fixes that.
A completion entry like «complete -a '\\~'» results in completions
that insert \~ into the command line. However we usually want to
insert ~, but there is no way to do that.
There are a couple of longstanding issues about completion escaping
[1]. Until we fix those in a general way, fix the common case by
never escaping tildes when applying custom completions to the command
line. This is a hack but will probably work out fine because we don't
expect literal tildes in arguments.
The tilde is included in completions for cdh, or
__fish_complete_suffix, which simply forwards results from "complete
-C". Revert a workaround to cdh that expanded ~, because we can now
render that without escaping.
Closes#4570, #8441
[ja: tweak patch and commit message]
[1]: https://github.com/fish-shell/fish-shell/pull/8441#discussion_r748803338
* Rename pabcnetcclear complete
* Code clean-up
* Debug values support
* Change /Debug description
* Standardize help
* Use single quotes for --arguments
We only need the curses module to look up sgr0, bold and underline
sequences.
Since those are going to be the xterm versions 90% of the time, we can
simply use those if this fails.
Fixes#8487.
* Add findstr completion
* Standardize completion
* Show completion only on Windows
* Use single quotes where possible
* Remove quotes where possible
* Remove OS check
* Use single quotes for --arguments
This looked at __fish_print_commands, which goes via our man pages to
find the commands (it shouldn't, buuut), and exludes a hard-coded list
of pages.
So we do two thigns:
1. We add the other doc pages to the list
2. We check commands *later* - if we listed something explicitly it
should be used
This was "--authoritative" (and unauthoritative). It was meant to make
fish mark everything that couldn't be generated via the completions as
an error, it was removed years ago and has been a no-op since then.
This behavior matches the way completions are found for `cargo run`,
`cargo test`, etc., and is more robust and correct compared to looking
at filenames.
This was supposed to act like `type -q` or `command -q`, in that it
returns 0 if at least 1 exists.
But because it used the wrong variable it didn't.
Fixes#8431.
Foot has several terminfos:
* foot - the default one
* foot-direct - 24-bit color terminfo, similar to xterm-direct (used by e.g. emacs)
* foot-extra - alternative to the ncurses provided terminfo, with a couple of extra, non-standard
capabilities
* foot-extra-direct - 24-bit color version of the above
There may also be other distro-custom terminfo names (serving the same purpose as foot-extra*)
Otherwise, with a light-theme, the selected entry uses black text with
"bright black" background, which can be low contrast thus hard to read.
The description background is different, maybe we can fix that later.
See #8376
This is nroff/groff being broken. It turns "→" into "â". This is even if we select `-Tutf8` and friends.
So, if mandoc exists, we prefer that, and otherwise, run preconv on
the file first (if it exists).
Really, what we would need to to is tell nroff to pass `-KUTF-8` to
groff, but that doesn't appear to be possible.
- Introduce BUILTIN_ERR_COMBO2_EXCLUSIVE
- Distill generally more terse, unambiguous error descriptions.
Remember English is not everyone's language.
- Do not capitalize sentence fragments
- Use the modality where problem input is in a %s: prefix, then
is explained.
- Do not address the user (the "You cannot do ..." kraderism)
- Spell out 'arguments' rather than 'args' for consistency
- Mention 'function' as a scope
This basically disables syntax highlighting. That doesn't mean we use
absolutely no colors - the search match, suggestion, selection and the
pager have coloring, but only reverse or brblack.
The idea is that this disables anything that tells you about
the *syntax*, but it still tells you about the state of the
commandline. If we didn't highlight the selection it would be entirely
invisible, and if we didn't highlight the suggestion you would have no
idea where it begins.
So this basically brings colors on-par with bash, where the search
match is colored (in reverse) and suggestions aren't a thing.
An alternative is to add a $fish_highlighting_enabled variable like
the one for suggestions. That's still possible, but would require some
internal changes to avoid coloring some things with $fish_color_normal
and other things with the normal terminal color.
One thing this also does not do is set the git prompt colors. These
are currently disallowed from being set in theme files because they
start with `__fish` instead of just `fish`. We should probably rename
them.
This program uses the Cobra framework for argument parsing and completion generation.
Just source the completions supplied by upstream.
This works around "go install" not being able to install completions files (only binaries).
Usually local branches have remote branches with the same name, and in
completion they are currently overshadowed by unique remote branches, making
local branches hard to find. Define local branch completion after unique
remote branch completion to show local branches before unique remote branches.
If $xdg_chache_home is empty, this is not a valid fish expression:
[ \( -z \) -o \( ! -d \) ]
and results into an error.
While at it, also use $XDG_CACHE_HOME if that directory does not exist.
This seems better than falling back to $HOME/.cache, which the user has
explicitly overridden via $XDG_CACHE_HOME.
In 'simple terminal' the delete key prints \e[P by default, which is
related to the different approach the authors of st are taking on the
matter of shell configuration. The main problem is the malfunction of
the delete key, so we have to use a workaround like this.
Suggest files to "man -l", but only if the "-l" option is supported
(so not on BSD). Technically we should accept multiple files but this
seems good enough.
Also suggest files when the token-at-cursor contains a slash, because
man will treat arguments as file paths if they contain a /.
git-status --porcelain prints status letter T when a file changed type
between either regular file, symlink or submodule. It can occur in
exactly the same cases as M (modified), so extend the fix for #8311
accordingly.
For submodules, our completions are probably not always correct,
hopefully those cases are rare.
This is weirdly undocumented (as of git 2.33.0), but `git status` prints a "T" state if
the file has its "T"ype changed, e.g. from a regular file to a symlink.
For our purposes that's just another kind of modification.
Fixes#8311.
* Hide whatis database building from the user
It's really an internal detail, but shows up in prompts that display how many
background jobs are running.
By disowning it keeps running but won't show up in `jobs` or get killed if the user
exits the shell.
* Update __fish_apropos.fish
The less -F / --quit-if-one-screen option is buggy before v530. To work
around this, pass --no-init less versions older than 530.
The --no-init option was previously passed; it was removed in d15a51897d
for mouse support. Unfortunately it looks like we can't have mouse
support and --quit-if-one-screen on macOS shipped less (version 487).
It's worth fixing this because otherwise history and help is just not
printed on stock macOS.
Relevant is https://unix.stackexchange.com/questions/107315/less-quit-if-one-screen-without-no-initFixes#8157.
Commit c3374ffd0 ("Use read --tokenize instead of eval for $BROWSER &
$EDITOR") converted uses of "eval" for environment variables to use the
safer "read -at", which performs word splitting but no other expansion.
funced contained a leftover instance of "eval". Remove it in favor
of using the editor command that was already word-split.
This means that we don't accidentally evaluate the file name.
(Also "set -gx EDITOR=~/my-editor" won't work anymore because the ~
is not expanded anymore but no one has complained about that behavior
in edit_command_buffer.)
Fixes#8289
*Problem:*
edit_command_buffer uses `cat` to return the modified content.
If a person has an alias for `cat` to a different command such `bat`** the editing will not be useful anymore since bat decorates the text with frames, line counts, etc
*Solution*
Appending command to cat, fish will ignore the alias and execute the real command according to this https://fishshell.com/docs/current/cmds/command.html
** https://github.com/sharkdp/bat
* Fix ls.fish: add -l option to GNU ls
* Sort alphabetically and remove --lcontext and --scontext (what are these?) on shared and GNU part.
* Revert --lcontext and --scontext options.
This should add all the sections that aren't linked internally,
including "identifiers".
(also give up on the line breaking because it makes it annoying to do
automatically)
Fixes#8245.
This was semi-automated with
```fish
for file in $argv
set -l varname (string replace -r '.*/(.*).html' '$1' -- $file | string escape --style=var)pages
set -l sections (string replace -rf '.*class="headerlink" href="#([^"]*)".*' '$1' <$file)
echo set -l $varname $sections
end
```
(where $argv contains the path to faq, fish_for_bash_users,
interactive, language and tutorial.html)
Building help.fish at compile time would work, but only for users who
build the docs.
The same hack that is used for `pkg remove <foo>` is required here, too.
Due to the massive number of results, we use `head -n 250` to prevent
the completion from hanging or the shell from being overencumbered by
too many possibe completions. However, this would only generate matches
for any of the first 250 packages, rather than printing the first 250
packages that match.
[ci skip]
As functions know where they are loaded from now, there is no point in
them being marked as loaded from a temporary file that has been removed.
Source the function via a redirect instead.
support for ping from iputils (version 20210202)
support for ping from inetutils (version 2.1)
support for ping from busybox (version 1.33.1)
support for ping from FreeBSD and macOS (by @juntuu)
Ubuntu's fish package on WSL 1 has xsel as recommended dependency,
even though there is no X server available. This change makes us
use Windows' native clipboard even when xsel is installed.
We keep __fish_is_nth_token for compatibility and edit the
implementations of __fish_is_nth_token, __fish_is_first_token and
__fish_is_token_n to use fish_is_nth_token
Using `complete -F -c git -n __fish_git_needs_subcommand -a $command -d
$description` causes file completions to be forced on entire git command
which is not a desired result. Morever without the `-F` flag file
completions work just as expected and is useless addition
