Arch changed the version string to include the package rel, so it
looks like
systemd 241 (241.7-2-arch)
which would break our simple `string replace` and `test`.
Fixes#5689.
[ci skip]
This was treated as a glob where it was still enabled, most likely removing the "-E" option from argparse,
which caused `sudo -E` to not be parsed correctly, breaking completion.
(There was no error because the glob was used with `set`)
Fixes#5675.
[ci skip]
Just a bunch of rewriting descriptions and some arguments.
Most arguments here are uncompleteable, and most of these options will
never be used.
[ci skip]
NetBSD's man is unusual in that it doesn't understand an empty
$MANPATH component as "the system man path", and doesn't have a
`manpath` or `man --path`.
It has a `-m` option that would be useful, but other mans also have a
`-m` option that isn't, so detecting it is tough.
It does have a `-p` option that almost does what one would want here,
so we hack around it to make things work.
Fixes#5657.
[ci skip]
It turns out the default gettext on the sunny operating system with
the many names interprets at least `\n` itself, so we'd end up
swallowing it.
This allows us to move past the interactive tests and onto the expect
ones.
See #5472.
Matches upstream path_helper which is invoked in /etc/profile and only
applies to login shells. Enables running interactive, non-login shells
with altered PATH values.
Reverts change in c0f832a7, which reverts change in adbaddf.
These are files with staged modifications, and additional unstaged
ones.
In practice what happened was that you ran
git add somefile
then editted it some more and tried to
git add <TAB>
which didn't offer it anymore.
Now, we offer it if either modified or modified-staged is set.
Currently modified-staged isn't ever set alone, but through
all-staged, so we still need to keep offering the file then.
(This shows that the current switch/case might have some holes)
Fixes#5648.
[ci skip]
This exposes it more, since it's quite an important function.
We should do the same with the other vcs functions.
We leave a compatibility shim in place for now.
I hope this is now complete.
Also, shorten enough descriptions to make `string match --<TAB>`
show a two column pager with 80 cols.
We really should have shown more retraint in the design of `string`,
not all of the flags required both a long and short option created.
300ms was waaay too long, and even 100ms wasn't necessary.
Emacs' evil mode uses 10ms (0.01s), so let's stay a tad higher in case
some terminals are slow.
If anyone really wants to be able to type alt+h with escape, let them
raise the timeout.
Fixes#3904.
Prior to this fix, we would write to a fifo via cat >$filename & .
However in some cases (and soon in all cases) we open the file before
the fork, not after. This results in a deadlock because the file open
cannot succeed until a write begins.
Switch to using tee to write to the file. Because tee opens the file itself,
fish is no longer responsible and the deadlock is resolved.
Prior to this fix, we would write to a fifo via cat >$filename & .
However in some cases (and soon in all cases) we open the file before
the fork, not after. This results in a deadlock because the file open
cannot succeed until a write begins.
Switch to using tee to write to the file. Because tee opens the file itself,
fish is no longer responsible and the deadlock is resolved.
* brew.fish: Add `update-reset` subcommand
This command resets all tap's remotes to the latest available upstream. Ideal for debugging before reporting bugs or just housekeeping.
Add missing newlines.
* Add `brew.fish` changes to CHANGELOG.md
We were checking for the $TMUX variable to determine if we were
running under tmux. However when running the tests, the terminal becomes
expect, even though the TMUX variable is still set, so we spew tmux-isms
at expect. Check the value of $TERM for 'screen'.
This allows disabling _just_ the informative status.
We still also use the dirty and untracked variables, but only if
informative status hasn't explicitly been enabled.
If either of the two git config variables:
- bash.showDirtyState
- bash.showUntrackedFiles
is explicitly set to false, we will disable informative status, and
fall back on the non-informative version (most likely still with
either dirty or untracked files, since we already use the variables
for that).
These vars are read by the official git prompt, so we use them instead
of inventing our own "fish.showInformativeStatus".
(Note: This also uses $__fish_git_prompt_showdirtystate and friends,
but only when there's nothing set in the repo, and there's really no
reason to set those to false if using the informative status)
Fixes#5551.
[ci skip]
Expands the utility of `type -p foo` by allowing it to print the path to
the script that defines `foo` when `foo` is a valid function that was
sourced from a path on disk (rather than interactively defined).
This does not change the behavior of `type -P`/`type --force-path`,
which should have already been used if the desire was to resolve the
path to an executable file (otherwise the output would have been blank
if a function was shadowing an executable file of the same namea), so no
backwards compatibility issues are expected.
Don't do it when the relative path is simple (purely descending),
unless the token starts with ":/".
Also stop offering directories - if they need to be disambiguated, the
normal completion logic will take care of that.
Fixes#5574.
[ci skip]
Previously, using special regex characters or slashes would result in an
error message, when pressing tab in a command-line such as
"man /usr/bin/time ".
shorter descriptions that can fit in a terminal window, and option arguments added.
hide one option that is only functional on Cygwin unless we are on Cygwin
Make it so that the generated completion has the form \t\n
when the optional description has been ommitted - otherwise
the original option's description gets inherited and is seen hundreds
of times repeating in the pager.
GNU ls's --indicator-style=classify is the same as POSIX -F.
Refactor and change command testing logic so that we define the
function in the same place for all platforms, and use -F on all
the platforms when stdout is a TTY.
Our weird %-expanding function wrappers around kill et all defined
"--wraps" for the same name.
As it turns out, fish follows that one, and executes the completion
multiple times.
I didn't notice because these tend to be rather quick on linux, but on
macOS that's apparently a real issue.
Fixes#5541.
[ci skip]
On `set fish_color_cwd <TAB>`, a bunch of named colors are
shown in the pager. Each and every one has a description of "Color".
These are all very obviously colors, and none are not colors,
the description does not tell us anything specific about the item.
Descriptions in situations like this are actually a hinderance
because of the way they cause less to fit into the pager. Remove it
Some $TERMs like tmux and linux use an sgr0 ("reset") value that ends
in \co instead of "m". We need to adjust our regex here to catch that,
or we'd miscount lines with it.
This broke when --preset was introduced.
We allow a "--preset" or "--user" to appear right after the "bind",
and save the value, but don't use it yet.
Fixes#5534.
[ci skip]
A person stuck installing it just for fish on their server
doesn't want to waste time installing the wrong one, so assuage that.
Also tweak to look nicer with 80 columns
As discussed in #5492, it would be good if running fish_config without
Python actually told the user to install Python.
Further, let's give the person some hints on how to configure these
things by hand, since they may have to.
This was an oversight from the previous commit. Not that it matters
much, because we already removed $files.
Still, this would fail if someone defined a global $files, so let's fix it.
[ci skip]
We can't complete these, and now the user can do
```
set -g __fish_git_alias_$alias $command
```
e.g.
```
set -g __fish_git_alias_co checkout
```
if the arguments in the alias end up going to `git alias`.
Fixes#5412.
[ci skip]
This enables fuzzy-matching outside of the current directory again.
As it turns out, the performance impact here isn't as large as I
thought - it's massively dependent on caching.
Fixes#5476.
Which is 4, apparently.. (builtin_set.cpp returns ENV_NOT_FOUND)
here. This was previously hardcoded to our 121, which used to be
what builtins used for invalid arguments.
4 is pretty arbitrary but at least this is more consistent.
I had previously introduced a lot of updates and fixes to npm registry
based completions for `yarn` but hadn't ported them to `npm` as well
(although they can be dropped in as-is). This patch shares the code
between the two, which resides in an explicitly sourced multi-function
fish script.
The informational message is only shown the first time an attempt at
completing `yarn add` is made per session. This should vastly improve
the discoverability of this feature as regular yarn/npm users would
never have `all-the-package-names` installed normally.
Starting with Fedora 30 and RHEL 8, ambiguous python shebangs will now
throw errors during the RPM build process instead of just warnings,
since these systems have moved to Python 3 by default, and Python 2 may
not be available in the future.
See [this
page](https://fedoraproject.org/wiki/Changes/Make_ambiguous_python_shebangs_error)
for more details.
Drop these shebangs as the scripts are only ever called from fish
wrappers.
This checks if uname exists (we already call it elsewhere without
check, nobody has complained, uname is in POSIX), then calls to see if
it's "Linux", and only then offers any completions.
Since we don't have any other version to offer, the check is worse
than useless.
* Severely extended the sorin theme
This theme should now mostly match the original.
* Removed superfluous whitespace
* Inlined external links as ASCII art
* Made myself the author of the sorin theme
* Removed superfluous read delemiter
* Renamed __fish_git_action to fish_print_git_action
* Adde a minor comment
Cleaned up the code to no longer replicate in fishscript what fish
already does (and caches to boot) in C++ in setting up the paths to the
user configuration directory.
Also introduced a `$__fish_user_data_dir` instead of the sporadic
definitions of `$userdatadir` that may or may not go through
`XDG_DATA_HOME`.
I spent some time figuring out $TERM_PROGRAM_VERSION and Terminal.app's
capabilities over time. [1]
Only use OSC 7 if running on the version of Terminal.app that added it
or newer. In the past this would have been harder because `test` couldn't
do float comparisons.
cleanup:
Don't bother setting a local $TERM_PROGRAM if it's unset: quoting
is enough to keep test happy. For the version numbers, 0"$var" is safe
against unset variables for numerical comparisons.
[1]: https://github.com/fish-shell/fish-shell/wiki/Terminal.app-characteristics
Instead of maybe adding "-s" and "-M" if "-s" hasn't already been
given, just add "-s" to _every_ bind invocation, and "-M" to those who
need it.
Fixes#5028.
Largely reverts 007d794b6e.
fish_indent is extremely resource-intensive on large inputs and can crash; it also does not handle
invalid characters gracefully.
Work on #5402.
The solarized themes now define pager colors, while other schemes
don't.
So if a user picks one of them, and then another, they'd keep the
pager colors.
Instead, since the default theme is now complete, any theme that does
not define its own pager colors will always get the default ones.
[ci skip]
This was missing a bunch of variables from __fish_config_interactive.
Ideally we wouldn't have to duplicate this info, but I don't have a
great solution either.
This removes ~140ms from every single prompt.
When not in a git repo, this prompt now takes ~9ms, as opposed to
~150ms before.
Fixes#5266 harder.
[ci skip]
This is quite ugly, but in lieu of putting in a proper ansi
parser (i.e. the output part of a terminal), since this is the only
such sequence we have seen until now, let's just match it.
Fixes#5312.
[ci skip]
- Remove use of `eval`
- Use `git rev-parse` instead of `git status` as its faster,
- especially in large repos. (in qt5: 600ms vs 1ms)
- Use return status instead of test -n
This should change nothing about the output.
This uses some more string, but the main improvement is using "git
rev-list" instead of parsing "git branch" output that happens to be localized.
[ci skip]
I can't see the value in this, given that we have a bunch of minimalist ones.
The "escaping" here is gnarly enough that I don't want to attempt to clean it up.
man.fish can be clarified a bit, by removing a superfluous early return. Additionally, performance can be
(ever so slightly) improved, by using the empty string to suffix an extra colon when `$MANPATH` is empty, as
described in `manpath(1)`. As `man` will internally call `manpath` as it starts, this eliminates a redundancy.
This adds the color variables from the docs to both the python script
and the js controller.
Among others, this includes "search_match", i.e.
"fish_color_search_match".
It still does not include the pager colors because the variable names
wouldn't match.
`ls` was suggesting options that are are not valid for my system,
omitting options that are on my system. Different BSD OSes have
different option extensions, and some of them do conflict with eachother.
I carefully checked the manuals of netbsd, macos, freebsd, and openbsd
`ls` and made the completions show the right completions in full for them.
Some verbiage tweaks as well.
- No longer uses sed, sort, uniq, uname
- Stop doing too-clever filtering (e.g. the kernel thread stuff never
- really worked)
- Don't truncate for all OSen, instead just use the (correctly
- truncated) comm field.
- Colorize history search output when interactive, using
fish_indent. This is the same way we colorize `type` output.
- Ask less to act like `cat` if the output will fit in the
terminal window, so it's less jaring with short output.
- history is viewed in a pager when interactive, but pagers
typically strip escape codes. We accomplish the above by
doing exactly what `git` does[1] when it has colored output
for a pager:
if $LESS is unset, set it to enable -R, -F, and -X options.
if $LV is unset, set it to -c.
[1]: 398dd4bd03/pager.c (L87)
Fixes some potentially unsafe uses of direct substitution into regex
expressions and also switches some completions to regex-based now that
there is a safe way of using it.
In writing the completion script for openocd I found the need to
complete paths at the command-line as if they were relative to a
path other than the current $PWD. Given that `$PWD` is currently
global in fish (i.e. no side-effect free `cd` within a subshell)
this is probably good to have for other completions too.
This also fixes a bug in support for explicitly supplying the
description for completions via a `$argv` parameter, which prefixed
the description with `\t` (which is correct) except it did so in
the local scope within an `if` statement, meaning the changes never
had any effect and in the output the description was directly
concatenated to the completions, instead of separated by a tab.
Incorrectly assumed that pandoc uses XDG_CONFIG_HOME, it turns out the
path is hard-coded as $HOME/.pandoc unless explicitly otherwise
specified in the command-line.
Don't attempt to complete against package names if the user is trying to
enter a switch to speed things up.
Also work around #5267 by not wrapping unfiltered `all-the-package-name`
calls in a function.
We do a bunch of escaping before to make `eval` work, and that needs to be removed as well or fragment-urls don't work.
This reverts commit e9568069a7.
Use clang/clang++'s own autocompletion support to complete arguments. It
is rather convoluted as clang generates autocompletions for a portion of
the current token rather than the entire token, e.g. while `--st` will
autocomplete to `--std=` (which is fine by fish), `--std=g` will
autocomplete to `gnu...` without the leading `--std=` which breaks fish'
support for the completion.
Additionally, on systems where clang/clang++ is the system compiler
(such as FreeBSD), it is very often for users to invoke a newer version
of clang/clang++ installed as clang[++]-NN instead of clang. Using a
monkey-patched version of `complete -p` to support that without breaking
(future) completions for commands like `clang-format`.
Closes#4174.
If you're using the old binding that only clears the commandline and
doesn't preserve its contents and start a new line, you can use
```fish
bind \cc "commandline -f cancel; commandline ''"
```
instead.
Closes#4298.
For some weird reason we only used $editor if it wasn't empty, but
then failed to fail if it was.
This will now print an error and use fish, just like if the $EDITOR
value is invalid in any other way.
Fixes#5257.
This is a wrapper that calls kitty to dynamically provide completions,
as generated by kitty itself, via `kitty + complete setup fish`.
ref: https://sw.kovidgoyal.net/kitty/#fish
The hg prompt walks up the directory hierarchy to decide if we are in a
repo subdirectory. Because hg is an external command, it resolves symlinks.
Switch to using pwd -P so hg and fish will have the same view of the hg repo.
Based on comment:
https://github.com/fish-shell/fish-shell/pull/5190#issuecomment-421912360
Mostly resolves#4862, though there remains the lingering question of
whether or not to emit a warning to /dev/tty or stderr when a
non-literal-zero index evaluates to zero.
This allows for marking certain bindings as part of a preset, which allows us to
- only erase those when switching presets
- go back to the preset binding when erasing a user binding
- only show user customization if requested
- make bare bind statements in config.fish work (!!!11elf!!!)
Fixes#5191.
Fixes#3699.
- Add support for:
- Jumping to the character before a target.
- Repeating the previous jump (same direction, same precision).
- Repeating the previous jump in the reverse order.
- Enhance vi bindings.
The Informative VCS sample prompt currently sets the `__fish_git_prompt_char_conflictedstate` variable which is unused.
It should instead set the `__fish_git_prompt_char_invalidstate` variable.
Ordering of directories above files was introduced in a recent change to
the same script. By default it does not matter as completions are sorted
by fish internally, but this allows the use of `-k` to sort files before
directories (or piped to `sort -r` for vice-versa).
Use `apt-cache show` instead of `apt-cache packagenames` to efficiently
print package names and a brief description instead of the placeholder
(localized) "Package" text that was previously printed. This applies to
both available and installed packages (for inistall and remove operations,
respectively).
TODO: update `__fish_print_packages` for non-debian platforms to do the
same.
When listing packages already installed (e.g. for use with `apt remove
...`), do not consider packages return by `dpkg --get-selections` with
state 'deinstall'.
Previously the `string replace` pattern was matching both 'install' and
'deinstall' packages.
Utilized the `--install` flag added in commit #8c09d6e.
Limit `eopkg remove/autoremove/check ...` completions to installed packages.
Limit `eopkg install/upgrade/info ...` completions to available packages.
Prior to this fix, __fish_describe_command would error if the
input contained any special characters, because it would be interpolated
into a regex. Hack in a guard to do nothing if the input contains
anything other than [a-zA-Z0-9_ ]
* update nim.fish sample prompt
- Use an helper function to wrap informations
- Add VIRTUAL_ENV infos, if any
- Add __fish_git_prompt, wrapped for the theme
- Add comments
- Remove ASCII failback symbols for tty
(no more useful for me, but if someone really needs it, just ask)
* fish.nim: test -n __fish_git_prompt
Added a new flag `--installed` via `argparse` to `__fish_print_packages`
which indicates that only installed packages should be listed.
TODO: Other non-debian/apt platforms should take advantage of this flag/
behavior as well.
It was only introduced in 2.16, which was released in January 2018.
Instead, we just use a bare "--ignored", which is equivalent to "--ignored=traditional".
The difference to "--ignored=matching" mode shouldn't matter to us here.
Fixes#5074.
Executes `whatis` safely, returns at most one line, and strips the name
of the command from the start of line, returning a value fit for use as
the description parameter for a completion argument value.
Fixes
- Use the actual path when skipping unusable paths to fix all Include
directives being skipped when there is no ~/.ssh directory
- Prevent "No matches for wildcard" message
Improvements
- Skip paths that are directories since we only want files
- Remove `cd` as it is not needed
__fish_complete_suffix assumed that the only literal . in a path
would be the . before an extension, and stripped accordingly. This
behavior has been there for a long time, but broke many things
including completion of relative paths and completion of paths with
a literal . in a directory name.
__fish_complete_suffix does not just complete extensions (or at the
very least, it no longer does just that) but rather any suffix, so
isolating the path name without the extension was unnecessary in all
cases.
I'm not sure what was wrong with the old syntax, but I needed to switch
the outer quotes to ' and the inner quotes to " in order for the
completions to work when they weren't explicitly sourced.
Additionally, realized that the overload for __fish_complete_suffix can
be used to get the filtered list of kernel modules from /boot/kernel in
the initial run.
Allows the most painful of curl's arguments to be completed by fish by
restoring file-based completions for paths prefixed with `@` (which are
typically used after parameters like --data).
With a blank $suff (i.e. complete all files), __fish_complete_suffix
returned directories twice, once with the trailing `/` and once without.
This fixes that, and additionally speeds up the code by no longer
shelling out to `sort -u` as we no longer rely on brace expansion to
enumerate directories and files simultaneously.
In general, this behavior would occur when a directory exists that
matches the suffix search pattern (so a dir named 'foo.bar' with a
search pattern '.bar' would return 'foo.bar' twice).
Runtime has dropped from ~22ms to ~8ms on my machine, while also
returning more correct results.
This allows snippets to use everything that is defined in config.fish,
which is our _base_ initialization.
Among other things, it enables snippets to use $PATH as it will appear
in the user's config.fish, or even to change $PATH.
Also, this is how it was in 2.7.1 and before (with the small change
that abbrs were upgraded after).
As defined in the `go help packages`:
Many commands apply to a set of packages:
go action [packages]
Usually, [packages] is a list of import paths.
This patch introduces automatic lookup of said packages from GOPATH
using `go list`, and provides them as options go subcmds.
I'm not sure what was up with the old completions,
`$__fish_service_commands` is not set anywhere and completions for the
command (not the service) were not being generated on my machine.
macOS and (AFAICT) most Linux distributions ship with the Info-ZIP
version of unzip, which has the `unzip -h` flag; but other
implementations of unzip do not necessarily have it (i.e. FreeBSD).
`unzip` under FreeBSD does not support `unzip -h`. Under both Linux and
FreeBSD, `unzip -v` presents the list of options, though. Using this
instead of `unzip -h` to detect the Debian-patched version of the
Info-ZIP unzip program.
This prints an escape sequence, so it can break scp or similar when
someone has an unqualified
fish_vi_key_bindings
in config.fish and happens to run a terminal that can set the cursor.
These completions are apparently based on an auto-generated version,
so there's a whole bunch of rewording to be done here.
Also for some reason some of the options are mentioned more than once?
Under FreeBSD, as annoying as it is, switches must directly follow the
command or subcommand in question, and cannot come after actual payload
argument. Calling `zpool get all -H` instead of `zpool get -H all`
caused error messages to be spewed to the console under FreeBSD when
simply completing `zfs <TAB>`, this should fix that. The change should
also be compatible with other operating systems (namely Linux) that
don't have this requirement, as they (generally) allow arguments to come
before _or_ after the primary non-switch argument (though I do not have
access to a zfs-enabled Linux machine to test this).
Previously, trying to complete a token with any of these
expansion-related characters would cause the completion to return no
results, as it would emit expanded values which weren't matched by the
autocompleter.
Only the first non-switch parameter to python must be a .py file, but
everything thereafter is "just another argument". This enables file
completions for 2nd+ arguments.
Akin to __fish_complete_suffix, __fish_complete_directories now attempts
to complete the current commandline token if no token is explicitly
passed in as an argument.
The prompt is a fallback that is overridden via a function file
anyway.
Do that with the title as well, so we can use just builtins.
This removes error messages when $fish_function_path is borked.
Turns out that `make -pn` actually takes a while - about 300ms on
fish's makefile.
That's quite a bit of time just to throw away the output and use the
exit code.
So we just check for "GNU" in the version string.
It would be nice to just _do_ the completion and fall back on the
BSD-style if it doesn't work, but that is tricky to do with the pipe
to `awk` - the awk expression actually does not fail if `make` does
not print output.
And I don't know enough about awk to change that.
While this is a bit faster (mostly because it needs less processing on fish's side),
it lacks the neat description bit and the ":/" stuff doesn't work.
The boost is also not large in absolute terms (a few milliseconds).
This reverts commit 1f8e4dad9f.
This uses the same logic that git uses to determine the satus of files
and doesn't require any parsing on our end. Brings in support for
relative paths (such as `git add ../f<TAB>`). Should be faster and more
reliable than manually parsing porcelain status.
This doesn't support as many cases as the old `__git_ls_files` function
did (e.g. `renamed` is not supported, nor is `added`), both of which
_can_ be implemented on top of the new logic - but neither of which were
actually being used, anyway.
Usefulness is decreased by #4970, speed still bottlenecked by #4969.
cc @faho
This is based on what the official git completions do, and it's quite
fast.
Also only complete files after a "--" separator for `checkout`.
Fixes#4858.
This is much quicker - on the order of 100ms vs 50ms.
We shorten to 10 characters, which is statistically suitable - 3 out
of 600k commits in the linux kernel need 11 characters.
For usage in completion scripts.
Unlike `__fish_is_first_token` (which is probably not correctly named),
`__fish_is_first_arg` returns true regardless of whether existing tokens start with `-`
or not, to be used when an arg cannot be used with any other argument.
`__fish_prev_arg_in` is similar to `__fish_seen_...` but it explicitly
tests the preceding token only, for arguments that take only a single
parameter.
As it turns out, for some terminals backspace is \b but only when
preceded by \e.
All this makes about as much sense as the english language.
Fixes#4955.
The previous completion generation was broken for several reasons:
* ./foo would break detection of suffix due to the leading . being
interpreted an extension marker,
* ./foo would be completed as foo, which would be excluded from
matching inrcomplete.cpp
Using `git for-each-ref` both simplifies the code (no need to deal
with detached heads anymore) and speeds it up.
With 1600 branches, the time goes from ~48ms to ~16ms.
- fix capitalization
- shorten descriptions
- implement subcommand shortcuts
- add arg completion for 'limit' and 'depth' switches
- improve arg completion for list subcommand in case of -p switch
bower was calling `__fish_should_complete_args`, the old name for
`__fish_should_complete_switches.`
yarn was parsing bower.json instead of package.json.
To be used by completions to directly determine whether it is either
possible or preferable to complete a switch (instead of a subcommand),
(presuming that switches must come before subcommands).
* __fish_can_complete_switches: we are in a position where a switch may
be placed.
* __fish_should_complete_switches: we're in a position to accept a
switch and the current token starts with `-` so we have no choice but
to do so.
Selectively reverts 156d4fb9b9.
`all-the-package-names` is still used to generate completions for `npm`
if it is installed, but it is not manually installed nor updated. It is
now the user's responsibility to do both, and it must be installed
globally.
`npm search` was _way_ too slow to be used for dynamic completions, so
using a cached list of all avaialable NPM packages to match against.
This is a bit brave for a fish completion, but the npm package
`all-the-package-names` has a list of, well, all the package names
avaialable for installation via the default npm registry. Installing a
copy locally to $HOME/.cache/fish/npm_completions and using that to
search for packages matching the tokenized command line.
Preference would be to call `__update_atpm` in the background, but that
emits an ugly "job has completed" message..
Should also use this for completions for `yarn add`.
Instead, attempt to extract the message that _would_ be displayed on
execution of `./configure --help` by relying on some markers present in
autoconf-generated configure files.
As measured with 'hyperfine' on a laptop running in reduced frequency
power savings mode, `fish -c "__fish_parse_configure ./configure"`
runtime dropped from ~1.25s to ~0.8ms, which is inline with the
previously observed ~350ms execution time for `./configure --help`.
fish's own startup time is approximately 75ms before parsing begins.
Still very slow, but much better.
This relies on the new `read --line/-L` support as an entire parser for
the output of `./configure --help` was written in fishscript. Also
doesn't work without 72f32e6d8a7905b064680ec4b578c41dea62bf84.
The completion script is slow... a function of both the autotools
configure script itself being written in a shell script combined with a
fishscript output parser.
fish's own `./configure --help` takes around 350ms to execute, while
`__fish_parse_configure ./configure` (which runs that behind the scenes)
takes around 660ms to run, all-in-all - a not insignificant overhead.
Output can be cached (based off of ./configure hash or mtime) in the
future if this is a big deal.
The default completions that autojump ships with for fish are broken
(emitting output like "1\___\#...") as they use hackes to work around
the previous lack of `complete -k`. The history-based autojump
completions fully replace it.
The job expansion wrapper was swallowing `-n` (and presumably `-e` and
others) when that was the literal argument we needed to emit. Using
`printf %s ...` instead.
Now the description includes the variable scope, `set [-e] -[Ugl]`
completions only provide variables matching that scope, and completions
that shouldn't be modified are hidden from the user. Completions that
are often modified but rarely unset (`fish_*` variables) are omitted
from `set -e` completions.
A new helper function `__fish_seen_argument` has been added that makes
it easy to only provied completions for a specific flag.
Launch `cmd.exe /c "start URL"` under WSL for both `fish_config` and
`help`. This works around #4299 but does not address the underlying
issue (#1132).
fish reads paths out of /etc/paths.d. Prior to adbaddf it did
this on every shell invocation; with adbaddf it does so on only login
shells. This change wasn't justified so let's revert this behavior.
(and /etc/paths.d/*)
Do so by emulating the behavior of /usr/libexec/path_helper for login
shells, matching the behavior in /etc/profile.
Also add a path_helper command to reproduce the behavior of
/usr/libexec/path_helper for fish.
This also handles setting MANPATH if necessary.
Fixes issue #4336
* Completion for conda, the package manager
* Make the list of platforms a private variable
* Add commands activate and deactivate
* Avoid clobbering a user-defined function __
* Use Use __fish_seen_subcommand_from to identify subcommand
And treat the case of the first argument as a special case
with function __fish_conda_fist_arg
* Factor out create from loop for option --name
* Fix typo (missing parenthesis in description)
* Start from a blank state by removing completions from conda configuration script
no-op function for compatibility with sh, bash, and others.
Often used to insert a comment into a chain of commands without having
it eat up the remainder of the line, handy in Makefiles.
- Cache translations instead of calling `gettext` once per file
- Only do the ":/" thing if the file isn't in $PWD/**
For a git repo created like
```fish
git init
touch a(seq 0 1000)b
```
this changes the time from about 2s to 0.3s.
`git rm --cached` is often used to delete a file that no longer exists
in the working tree but remains in git's index. `git ls-files` will list
files that are in the HEAD, which is exactly what we want. Local files
not in `HEAD` can't be deleted from git anyway.
The tool subcommand had a "-f" flag to disallow file completions which is wrong: most of the tools there require a file/directory argument.
Since we're here, also limit "go tool compile" to only match Go source files.
In similar vein to how fish_default_key_bindings works, parameters
passed to the function are automatically passed to bind upstream.
Additionally, -s is automatically added if no parameters had been
specified to prevent startup error messages. See 46d1334.
Closes#4494
Drops the % notation for process expansion. The existing notation was a
mess and expanded jobs, process ids, and process names via dark magic.
With this change, % is no longer a special character and can be used
unescaped with impunity.
The variables %self and %last, referring to fish's own pid and the pid
of the last backgrounded job respectively, have been replaced with $pid
and $last_pid. These are read-only variables, protected against being
redefined by the user.
Author's note: I would have personally preferred $fish_pid instead of
$pid but since we debated changing $version to $fish_version and then
reverted that change (with much acrimony), it makes no sense to break
with that precedent here. Additionally, $fish_last_pid is quite wordy.
Closes#4230. Closes#1202.
Now parses package.json and uses results to provide a list of possible
completions to `yarn remove`. There may be other subcommands that could
benefit from this.
Could have parsed yarn output, but yarn is slow and packages.json format
is generally standard since it's machine-generated json.
Can be used to retrieve a list of parent paths, useful for searching
ancestors recursively via their absolute paths. Paths are returned from
deepest to shallowest, starting from the path passed in. Paths are not
validated for performance reasons. (Usually the input to
__fish_parent_directories would be (pwd) or (dir $file).)
* 🚀
* prepare to merge into fish-shell
* split into different files
* remove deprecated option
* captitalize descriptions
* make shorter description for ansible
* update ansible-playbook (and ansible for consistency)
* update version on vault and galaxy
This never worked properly (since a branch that only exists locally
would also be offered) and is dog-slow.
When we come up with a better way to do it we can readd it.
When git prints a path like "share/completions/git.fish", that's
relative to the root of the repo. So we need to either remove
everything from the $PWD (if the path is inside the $PWD), or prepend
a ":/", which is git-speak for "relative to the root".
This was removed by mistake in the recent switch to `git status`.
Fixes#4688.
* git completions: Parse git status --porcelain
This is much faster on large repositories, as it allows us to do a lot
more with a single git call.
It also makes it easy to add descriptions to distinguish modified
files from untracked ones.
TBD is if all commands now have the right kinds of files.
[ci skip]
`git push REMOTE :BRANCH` deletes remote branch BRANCH from remote
REMOTE. Should only kick in when the pattern matches, hopefully didn't
break anything else!
* Add eopkg support
Add support for eopkg in __fish_print_packages function, and
add new completion eopkg.fish in share/completions
* Sorry for the empty file
* Sorry for the empty file again
* Use builtin function for checking subcommand and options
* Fix description
* Use string function to replace grep and cut
* Add completion for search command
This was caused by it prepending "-s" to argv always,
and later checking $argv[1].
As it turns out, that is kinda superfluous, so we can just add "-s" to
the `bind` calls.
Also adjust the tests so the vi-bindings are enabled via the function,
which would have caught this.
Fixes#4494.
Turns out "__fish_git_staged_files" does the same thing as "__fish_git_modified_files --staged".
Also use "--staged" instead of "--cached", which is a more
understandable synonym.
Many thanks to @thomcc on gitter.
Before this change, if a command failed, this was indicated by the "$"
at the end of the prompt turning red.
With this change in place, if a command fails, the exit code of the
failing command is displayed in [square brackets].
Running "cut" multiple times in a loop has an adverse performance
impact on first use, especially on slow systems. Using builtin "read"
for the same purpose is faster and cleaner.
for various completions.
This makes the code a bit nicer, removes one of the
__fish_print_hostnames calls (which are slow) and a sed call, thereby
improving performance by about 33% (600ms to 400ms).
Fixes#4511.
The previous hack used to work around an OS X issue/bug where launching
a URL with a #fragment appended would drop the fragment by using
`osascript` does not seem to work any more. Append the section name as a
query string (in addition to, not instead of #section) and then use some
basic javascript appended to the user doc HTML template to parse that
and jump to the correct section (if the section was dropped).
Closes#4480
fish was indiscriminately calling `rustc -Z help` in the autocompletion
script for `rustc`, but `-Z` (and its `-Z help` output completions) is
only available when using the nightly compiler.
Note that this isn't a perfect fix since if you try to use those command
line options now added to the autocompletions list without using the
nightly toolchain, `rustc` will still throw an error. But at least this
way we don't cause random errors about `-Z` not being available to
appear any time someone tries to use `rustc` from the fish command prompt.
E.g. if "foo" is in CDPATH, and both "foo/bar" and "./bar" exist, `cd
bar` will go to ./bar.
The completions described "bar" as going to "foo/bar" ("CDPATH foo").
This fixes it by checking for ./bar's existence.
See #4475.
\b does not match "end of spaces" but rather "start of a-z/0-9" and so
does not match the start of string '-c'. Match (and then re-insert) a
literal ' ' as part of the pattern instead.
Work around bug pypa/pip#4755
Don't expect all users to be running a version of pip2/3 that includes
the fix (once it's upstreamed). Will continue to work if/when pip2/3
emit the correct output. pip is already very slow at printing the
completions (see #4448) so the `sed` call overhead is neglible.
* Add pip completion
* We call native pip completion for fish if pip is installed
* Add pipenv completion
* We call pipenv native completion if pipenv is installed
* Applied changes as requested by @floam
* Changed usage of `test (command -v)` for just `command -sq`
* Add completions for pip2/3
* In some systems pip is not aliased and we have pip2 and pip3
* In those cases, we just load the completions for those commands
* Separate pip2/3 completions in their own file as requested by @floam
This silences binding errors due to keys not found in the current
termcap config in the default fish bindings.
Closes#4188, #4431, and obviates the original fix for #1155
It was necessary to re-implement builtin_bind as a class in order to
avoid passing around the options array from function to function and
as adding an opts parameter to `get_terminfo_sequence` would require
otps to be passed to all other builtin_bind_ functions so they could, in
turn, pass it to `get_terminfo_sequence`.
This
- Offers more candidates
- Is more reactive (it'll always incorporate "--state=" and "--type="
- Is faster (about 800ms to about 120ms)
- Needs fewer function files
All __fish_systemctl_* functions except __fish_systemctl_services have
been removed.
Decided to move doc_src/fish.lss to share/lynx.lss, which just makes
more sense all around. Accordingly, now using {$__fish_datadir} instead
of {$__fish_help_dir} in help.fish.
Makefile now installs the custom lss on make install
Lynx uses a very naïve method of applying styles to HTML elements by
hashing the element type and the class name to generate a map of
hash:style. After the hash is calculated, Lynx does not go back and
check whether or not the actual string values match the LSS properties.
See the following links on the Links mailing list:
* http://lists.gnu.org/archive/html/lynx-dev/2015-12/msg00037.html
* http://lists.gnu.org/archive/html/lynx-dev/2015-12/msg00039.html
This patch copies the default Lynx stylesheet but removes highlighting
and other styles that would result in unreadable text (due to not enough
contrast with the background color), and if the `help` builtin detects
that the best web browser to use is Lynx, it instructs it to use this
modified stylesheet.
If the $DISPLAY environment variable is not set, xdg-open should not be
used to load the web browser. Just because it is installed does not mean
that the user exclusively runs in an X session.
Needed for Lynx detection to work around #4170
Thanks to @ThomasAH, as per #4378. Tested on many platforms (OS X,
FreeBSD, Linux, and Solaris). Works with IPv4 and IPv6 as well as
host names and loopback addresses.
Drawing prompt in repo with text=auto attribute and mixed line endings in files was spawning crlf conversion warnings to terminal from unsilenced stderr of git diff
j does not have any "logical" source of completions, but it almost often
called with arguments that have been seen before (since it is used to
jump to favorite/recent directories). We can search the history for
possible completions and use those.
This is an example of the behavior mentioned in #4344 as a possible
enhancement for fish 3.0, where completions can be provided from history
if none are otherwise found.
This flag was only documented for a few weeks before being renamed
`--show-time` and has been deprecated for a long time. Fish 3.0 is a good
opportunity to remove it.
* Implement `history search --reverse`
It should be possible to have `history search` output ordered oldest to
newest like nearly every other shell including bash, ksh, zsh, and csh.
We can't make this the default because too many people expect the
current behavior. This simply makes it possible for people to define
their own abbreviations or functions that provide behavior they are
likely used to if they are transitioning to fish from another shell.
This also fixes a bug in the `history` function with respect to how it
handles the `-n` / `--max` flag.
Fixes#4354
* Fix comment for format_history_record()
commit e07f1d59c06094846db8ce59f65d4790b222fffa
Author: Mahmoud Al-Qudsi <mqudsi@neosmart.net>
Date: Sun Sep 10 21:54:45 2017 -0500
Use git branch and git branch --remote for checkout completions
commit 9e1632236be065e051e306b11082ca4e9c7a0ee1
Author: Mahmoud Al-Qudsi <mqudsi@neosmart.net>
Date: Sun Sep 10 11:27:30 2017 -0500
Correct classification of remote and local branches
To prevent any breakage, no changes were made to __fish_git_branches,
instead its output was filtered into __fish_git_remote_branches and
__fish_git_local_branches, the two of which are now used to provide
completions for "git checkout ..."
Fixes#4395Closes#4396
It seems that under python3, s3cmd emits its output as a long list (like
ls -l) with or without the --long parameter to "s3cmd ls s3://...".
This patch includes only s3://* paths from that output as completions.
Addresses the main concern of #3830 by preserving the internal ordering
of tag/branch listings generated by git. Fixes mixing of remote and
local branches in completions.
Does not address the concern of having local branches on top, remote
branches after, and tags at the bottom - I don't believe we have that
functionality available to us yet. #361 only implemented sort within a
category of completions, but there is no category "weight" unless I'm
mistaken.
* Add repo completion for zypper
* Replace sed with string in __fish_print_zypp_repos
* Move function into completion script
* Update zypper completion
add subcommand packages to __fish_zypper_repo_commands
Using bare vars is more efficient because it makes the builtin `math`
expression cache more useful. That's because if you prefix each var with
a dollar-sign then the fish parser expands it before `math` is run.
Something like `math x + 1` can be cached since the expression is the
same each time it is run. But if you do `math $x + 1` and x==1 then you're
effectively executing `math 1 + 1`. And if x==2 the next time then you're
running `math 2 + 1`. Which makes the expression cache much less effective.
Remove our `math` function that wraps `bc`. Our math builtin is now good
enough that it can be the default implementation.
Another step in resolving #3157.
Per the discussion with @faho in #4332, replaced some custom completion
state detection functions with standard __fish_* functions used in other
completion sources.
(cherry picked from commit f706081ea4)
No longer auto-generated. Everything has been summarized. Supressing
file completions for initial command, providing list of valid initial
commands, filtering --options by subcommand.
(cherry picked from commit 539acd9fc5)
This patch adds completion for the update subcommand, that is, when the
user types in `composer update <tab>`.
The code depends on python for the json parsing. I'm not sure if this
is appropriate or if there is a fish-native way to parse json data.
Use suggestions for remove subcommand.
Add suggestions for why, why-not and depends.
Add why/why-not suggestion.
Specifically closes#4313.
Not being as agressive in what we ignore/blacklist, but can be revisited
easily in the future to add more characters to the argument blacklist.
Rewrite the `abbr` function to store each abbreviation in a separate
variable. This greatly improves the efficiency. For the common case
it is 5x faster. For pathological cases it is upwards of 100x faster.
Most people should be able to unconditionally define abbreviations in
their config.fish without a noticable slow down.
Fixes#4048
The primary motivation for --keep-order for `complete` was to support
something like commit history completions, which are returned by git in
reverse chronological order and make no sense alphabetically (they are
SHA1 hashes).
See https://github.com/fish-shell/fish-shell/issues/361 for more info.
* Make npm run-script completion faster with `jq`
When jq is available, it's actually faster to invoke jq and parse the `package.json`
invoking the `npm` command.
Also, prior to this commit, both `__fish_complete_npm` and `__fish_npm_run` were being run
whenever completions for `npm run` subcommand was being used, which was actually making
repetitive work (invoking npm command twice). This pull request is supposed to make completion
without `jq` faster as well
* Refactor npm.fish for code reutilization
Created function to handle both cases of npm run completion parse, with or without `jq` completion.
* Remove unecessary blank line
The recent change to switch `psub` to use `argparse` caused it to use
a fifo by default because it inadvertently fixed a long standing bug in
the fish script. This changes the behavior back to `psub --file` being
the default behavior and introduces a `--fifo` flag. It also updates the
documentation to make it clearer when and why `--fifo` mode should not
be used.
Fixes#4222
While updating the `history` function to use `argparse` I realized it is
useful to define an option that can be used in three ways. First by
using the short flag; e.g., `-n NNN`. Second by using the long flag;
e.g., `--max NNN`. Third, as an implicit int flag; e.g., `-NNN`. This
use case is now supported by a spec of the form `n#max`.
A recent regression to the `alias` command points out the need for more
unit tests of its behavior. I also decided to use it as an opportunity
to normalize the output of just `alias` to list aliases.
The previous change to use `argparse` for parity with every other
builtin and function introduced a regression. Invocations that start
with a negative number can fail because the negative value looks like an
invalid flag.
This implements a `fish_opt` command that provides a way for people
to create option specs for the `argparse` command as an alternative to
creating such strings by hand.
Fixes#4190
Var `___git_ps_color_suffix_done` is supposed to be
`___fish_git_prompt_color_suffix_done`. This bug was found by an
experimental change to detect the use of undefined variables (#4163).
Similarly, we should simply test whether `__fish_git_prompt_showcolorhints`
is set rather than set to a non-empty string.
We now have a builtin that can do URL escaping so use it. I can't find
any uses of our private `__fish_urlencode` function in any Oh-My-Fish or
Fisherman code so remove it.
This is another step to resolving issue #1310. It makes
`fish_breakpoint_prompt` a replacement for `fish_prompt` if it is defined
and we're presenting a prompt in the context of a `breakpoint` command.
This implements `status is-breakpoint` that returns true if the current
shell prompt is displayed in the context of a `breakpoint` command.
This also fixes several bugs. Most notably making `breakpoint` a no-op if
the shell isn't interactive. Also, typing `breakpoint` at an interactive
prompt should be an error rather than creating a new nested debugging
context.
Partial fix for #1310
* Added Magento2 CLI completions
This is the completion file for the Magento2 CLI application I use on my servers. It has an additional feature tho, I'm not sure if it fits into the fish completion philosophy:
If you provide limited access credentials, it will connect to the MySQL database and provide additional suggestions, such as available users, themes or indexers in the database. If this file is never touched, those suggestions simply won't show up. I, personally, find them to be pretty useful, though.
Should I remove those database suggestions before creating a PR?
* Removed functions using MySQL, updated formatting
* Several smaller fixes
* Improved descriptions
Tried to shorten the text as much as possible and removed unnecessary characters
* Implement https://github.com/hanny24/gradle-fish/blob/master/gradle.load
* Use XDG_CACHE_HOME
* Use __funced_md5
* Fix fish_md5.fish
* Actually use the new function.
* Use string match for matching tasks
* I goofed. Actually pass a string to complete -a
* Fix attempt to remove needed function...
* Fix regex
* Fix fish_md5.fish to use a flag
Per my comment in issue #3980 this implements `__fish_print_users` in
terms of `__fish_complete_users` so we don't have to modify both when a
change to how users are enumerated is needed.
