* Implement fish_wcstod_underscores
* Add fish_wcstod_underscores unit tests
* Switch to using fish_wcstod_underscores in tinyexpr
* Add tests for math builtin underscore separator functionality
* Add documentation for underscore separators for math builtin
* Add a changelog entry for underscore numeric separators
We can't always read in chunks because we often can't bear to
overread:
```fish
echo foo\nbar | begin
read -l foo
read -l bar
end
```
needs to have the first read read `foo` and the second read `bar`. So
here we can only read one byte at a time.
However, when we are directly redirected:
```fish
echo foo | read foo
```
we can, because the data is only for us anyway. The stream will be
closed after, so anything not read just goes away. Nobody else is
there to read.
This dramatically speeds up `read` of long lines through a pipe. How
much depends on the length of the line.
With lines of 5000 characters it's about 15x, with lines of 50
characters about 2x, lines of 5 characters about 1.07x.
See #8542.
This is the simple fix - if we have no valid digit, we have nothing to
return. So instead of returning a NULL, we return an error.
This is already the case for invalid octal escapes (like `\777`).
Fixes#8545
This reverts commits:
2d9e51b43ed1d9f147ec346ce8081b
The box drawing because it's entangled with the rest and we don't
currently use this anywhere I know of. Nor was it gated on terminfo,
so it could have broken things, for subjectively little gain.
Fixes#8727.
A history search ends when you move the cursor, but the commandline inserted by
history search is still marked as transient. This means that the next history
search will clear the transient commandline. This means we are dropping an undo
point, for example:
echo 11
echo 1
echo autosuggestion
echo^P # commandline is "echo 1"
^A # stop history search
^P # commandline is "echo 11"
^Z # Bug: commandline goes back to "echo", but it should be "echo 1"
In the worst case, we are switching from line-search to token-search (see
the attached test case). Clearing the transient edit means the line is gone
and only the token is left on the command line.
Say the user has a multi-char binding (typically an escape sequence), and a
signal arrives partway through the binding. The signal has an event handler
which enques some readline event, for example, `repaint`. Prior to this
change, the readline event would cause the multi-char binding to fail. This
would cause bits of the escape sequence to be printed to the screen.
Fix this by noticing when a sequence was "interrupted" by a non-char event,
and then rotating a sequence of such interruptions to the front of the
queue.
Fixes#8628
Today, a command like "var=val status " has custom completions
because we skip over the var=val variable override when detecting
the command token.
However if the custom completions read the commandline state (via
"commandline -opc") they do see they variable override, which breaks
them, most likely. Try "a=b git ".
For completions of wrapped commands, we already set a transient
commandline. Do the same for commands with leading variable overrides;
then git completions for "a=b git " will think the commandline is
"git ".
`read` allows specifying the initial command line text. This was
text got accidentally ignored starting in a32248277f. Fix this
regression and add a test.
Fixes#8633
Previously, when we got an unknown option with --ignore-unknown, we
would increment woptind but still try to read the same contents.
This means in e.g.
```
argparse -i h -- -ooo -h
```
The `-h` would also be skipped as an option, because after the first
`-o` getopt reads the other two `-o` and skips that many options.
This could be handled more extensively in wgetopt, but the simpler fix
is to just skip to the next argv entry once we have an unknown option
- there's nothing more we can do with it anyway!
Additionally, document this and clearly explain that we currently
don't transform the option.
Fixes#8637
fish_git_prompt may run certain git commands which may invoke certain
external programs as specified `.git/config`. Prevent this by suppressing
certain git config options.
This affects the caret position. In an expression like
123 456
we previously reported:
123 456
^ missing operator
Now we do:
123 456
^ missing operator
We do it on the first space, which should be acceptable.
(no need for a changelog entry, we have already ignored #8511)
Only show the shebang warning for .fish commands.
Use the phrase "interpreter directive" as the formal name for the
shebang.
Switch from windows to Windows for the operating system.
"not not return 34" exits with 34, not 1. This behavior is pretty
surprising but benign. I think it's very unlikely that anyone relies
on the opposite behavior, because using two "not" decorators in one
job is weird, and code that compares not's raw exit code is rare.
The behavior doesn't match our docs, but it's not worth changing the
docs because that would confuse newcomers. Add a test to cement the
behavior and a comment to explain this is intentional.
I considered adding the comment at
parse_execution_context_t::populate_not_process where this behavior
is implemented but the field defintion seems even better, because I
expect programmers to read that first.
Closes#8377
Commit e40eba358 (Treat text following quoted command substitution
as quoted) made parse_util_locate_cmdsubst_range() aware of quoted
command substitutions, by skipping surrounding text via quote_end().
However, it was not quite right. We fail to properly parse
two consecutive command substitutions in the same string,
because we don't maintain the quoting context across calls to
parse_util_locate_cmdsubst_range(). Let's track that bit in a
parameter. This allows us to get rid of the quote_end() hack.
Also apply this to the other place where we call
parse_util_locate_cmdsubst_range() in a loop (highlighting).
Fixes#8500
This fixes a regression about where we report errors:
echo error(here
old: ^
fixed: ^
Commit 0c22f67bd (Remove the old parser bits, 2020-07-02) removed
uses of "error_offset_within_token" so we always report errors at
token start. Add it back, hopefully restoring the 3.1.2 behavior.
Note that for cases like
echo "$("
we report "unbalanced quotes" because we treat the $( as double
quote. Giving a better error seems hard because of the ambguity -
we don't know if quote is meant to be inside or outside the command
substitution.
If you make a script called `foo` somewhere in $PATH, and did not give
it a shebang, this would end up calling
sh foo
instead of
sh /usr/bin/foo
which might not match up.
Especially if the path is e.g. `--version` or `-` that would end up
being misinterpreted *by sh*.
So instead we simply pass the actual_cmd to sh, because we need it
anyway to get it to fail to execute before.
For some reason, the window dimension parameters are ignored by tmux.
Not even an extra "resize-pane -x 80 -y 10" helps. So let's just drop
that assumption from our tests.
When the completion pager fills up all lines of the screen, we subtract
from the pager size the number of lines occupied by the prompt +
command line buffer (typically 1), so the command line is always
visible. However, we only subtract the number of lines *before* the
cursor, so on some multiline commandlines we draw a pager that is
too large for our screen, clobbering the commandline rendering.
Fix this by counting all lines.
Fixes#8509
Possibly fixes#8405
A command like "printf nonewline | sed s/x/y/" does not print a
concluding newline, whereas "printf nnl | string replace x y" does.
This is an edge case -- usually the user input does have a newline at
the end -- but it seems still better for this command to just forward
the user's data.
Teach most string subcommands to check if stdin is missing the trailing
newline, and stop adding one in that case.
This does not apply when input is read from commandline arguments.
* Most subcommands stop adding the final newline, because they don't
really care about newlines, so besides their normal processing,
they just want to preserve user input. They are:
* string collect
* string escape/unescape
* string join¹
* string lower/upper
* string pad
* string replace
* string repeat
* string sub
* string trim
* string match keeps adding the newline, following "grep". Additionally,
for string match --regex, it's important to output capture groups
separated by newlines, resulting in multiple output lines for an
input line. So it is not obvious where to leave out the newline.
* string split/split0 keep adding the newline for the same reason --
they are meant to output multiple elements for a single input line.
¹) string join0 is not changed because it already printed a trailing
zero byte instead of the trailing newline. This is consistent
with other tools like "find -print0".
Closes#3847
A «complete -C '~/fish-shell/build/fish '» fails to load custom
completions because we do not expand the ~, so
complete_param_for_command() thinks that this command is invalid.
Expand command tokens before loading custom completions.
Fixes#8442
Currently,
set -q --unpath PATH
simply ignores the "--unpath" bit (and same for "--path").
This changes it, so just like exportedness you can check pathness.
* fish_key_reader: Simplify default output
It now only prints the bind statement. Timing information and such is
relegated to a separate "verbose" mode.
* Adjust fish_key_reader docs
* Adjust tests
This finds the first broken component, to help people figure out where
they misspelt something.
E.g.
```
echo foo >/usr/lob/systemd/system/machines.target.wants/var-lib-machines.mount
```
will now show:
```
warning: Path '/usr/lob' does not exist
```
which would help with seeing that it should be "/usr/lib".
On a commandline like "ls arg" (cursor at end) we do not expand
abbrevations on enter. OTOH, on "ls " we do expand. This can be
frustrating because it means that the two obvious ways to suppress
abbrevation expansion (C-Space or post-expansion C-Z) cannot be used to
suppress expansion of a command without arguments. (One workaround is
"ls #".)
Only expand-on-execute if the cursor is at the command name (no space
in between).
This is a strict improvement for realistic scenarios, because if there
is a space, the user has already expressed the intent to not expand
the abbreviation. (I hope no one is using recursive abbreviations.)
Closes#8423
This was supposed to act like `type -q` or `command -q`, in that it
returns 0 if at least 1 exists.
But because it used the wrong variable it didn't.
Fixes#8431.
This allows rebinding escape in the user list without breaking e.g.
arrow keys (which send escape and then `[A` and similar, so escape is
a prefix of them).
Fixes#8428.
