This adds string-x.rst for each subcommand x of string. The main page
(string.rst) is not changed, except that examples are shown directly after
each subcommand. The subcommand sections in string.rst are created by
textual inclusion of parts of the string-x.rst files.
Subcommand man pages can be viewed with either of:
```
man string collect
man string-collect
string collect <press F1 or Alt-h>
string collect -h
```
While `string -h ...` still prints the full help.
Closes#5968
Presently the completion engine ignores builtins that are part of the
fish syntax. This can be a problem when completing a string that was
based on the output of `commandline -p`. This changes completions to
treat these builtins like any other command.
This also disables generic (filename) completion inside comments and
after strings that do not tokenize.
Additionally, comments are stripped off the output of `commandline -p`.
Fixes#5415Fixes#2705
Some distros (Arch) use python command for Python 3, so we need to update the scripts to work with it. We cannot just switch to python3 command because MacOS does not ship it.
We used to just check for the presence of "--" on the command line to
make judgements about which completions to suggest. Now, even if "--" is
present, we can still make different suggestions by taking the cursor's
position into account.
If "--" is present in the command line, it's usually safe to assume that
the user is going to want to complete a file tracked by git so let's
only suggest branches if "--" isn't present.
When there is already a "src:", we assume that it is a valid ref and
just complete "dst". This allows completion of dest if src is e.g. a
commit SHA (completing all possible refs would probably impact
performance).
See issue #3035.
* Add completions/sfdx.fish
* completions/sfdx.fish: add completion for options
* completions/sfdx.fish: add a completion for --manifest(-x) option which need package.json
* completions/sfdx.fish: replace redundant function with already existing one
Revert "gut gpg.fish/gpg1.fish/gpg2.fish; migrate functionality to __fish_complete_gpg.fish"
This reverts commit d558218d03.
Revert "break version-specific completions out into independent function;"
This reverts commit 9160e77b01.
Revert "split gpg2- and gpg1-specific completions to conditional block"
This reverts commit a069b95f63.
1. Added missing commands and arguments.
2. Removed alternative spelling of some commands (e.g. clear-cache|clearcache) since a choice of spelling is not really useful for completion.
3. Fixed a typo: np-ansi → no-ansi.
4. Removed redundant backslash in front of $COMPOSER_HOME.
The updated completion was initially generated using the bamarni/symfony-console-autocomplete package and then incorporated into the existing code.
This commit makes git completions aware of files that are both staged as renamed, and have unstaged
modifications/are deleted.
__fish_git_files now potentially prints these files twice:
$ __fish_git_files renamed modified
foo Renamed file
foo Modified file
Fixes#6031
See for example: https://git-scm.com/docs/git-cherry
git cherry is quite helpful when trying to findout if merges between
branches are complete, when there were cherry-picks in addition to
merges.
Instead of requiring a flag to enable newline trimming, invert it so the
flag (now `--no-trim-newlines`) disables newline trimming. This way our
default behavior matches that of sh's `"$(cmd)"`.
Also change newline trimming to trim all newlines instead of just one,
again to match sh's behavior.
The `string collect` subcommand behaves quite similarly in practice to
`string split0 -m 0` in that it doesn't split its output, but it also
takes an optional `--trim-newline` flag to trim a single trailing
newline off of the output.
See issue #159.
This completed the commandline with options removed, which looked like
env VAR=VAL command option
Which didn't really actually work.
Fixes#5856.
[ci skip]
* Add speedtest-cli/speedtest completion
Added a completion file for speedtest-cli utility (https://github.com/sivel/speedtest-cli) as shipped from various package repositories.
* added no-files parameter
* Remove inheritance to speedtest
* Create speedtest.fish
This command can be used to "`cat`" the contents of `$path` as of `$rev`.
These are "silent" completions, e.g. while this adds a completion for
`git show master:foo`, the completions for `git show <TAB>` are not
affected; these "advanced" completions kick in only after at least
`git show master:<TAB>` to prevent completion pollution or slowing down
tab completions in the typical case (as this would cause each valid and
possibly unique $rev completion result to complete to `n*$rev`
completions for *n* files.
[ci skip]
Classic case of not seeing `and` as a new command:
`__fish_git_using_command config and anotherthing`
causes `and anotherthing` to be passed as arguments to
`__fish_git_using_command` instead of being executed.
[ci skip]
A function file for a function used only by one completion (and
unlikely to be used anywhere else).
If another user shows up, we can move it out again.
Part of #5279
[ci skip]
This should be the last call to `grep` outside of a script
specifically related to `grep`.
(With the exception of `zpool`, which I've already written, but which
will probably be merged later)
Also prevents file completions where they are not approprite, and
additionally shortened the descriptions to fit in two pager columns
in an 80-wide terminal for some platforms.
Apparently that's actually faster than jq, and it's more likely to be
installed.
Also it should convince the arch packager to remove the jq dependency.
The indentation is weird, though.
[ci skip]
+ tweaks for Linux: shorter descriptions, suppress file completions
+ Add correct completions for macOS, NetBSD, FreeBSD, OpenBSD, DragonFly
+ Solaris dmesg has no options, so complete nothing there
These aren't perfect, but the tool is pretty much hostile to proper
completions - it includes a "--machine-readable" option, but `vagrant
global-status --machine-readable` prints great output like
```
1551816037,,ui,info,id
1551816037,,ui,info,name
1551816037,,ui,info,provider
1551816037,,ui,info,state
1551816037,,ui,info,directory
1551816037,,ui,info,
1551816037,,ui,info,-------------------------------------------------------------------------
1551816037,,ui,info,d3ea265
1551816037,,ui,info,default
1551816037,,ui,info,virtualbox
1551816037,,ui,info,poweroff
1551816037,,ui,info,/home/alfa/dev/oi-userland
1551816037,,ui,info,
1551816037,,ui,info,fdf42c4
1551816037,,ui,info,default
1551816037,,ui,info,virtualbox
1551816037,,ui,info,poweroff
1551816037,,ui,info,/home/alfa/dev/vagrant/NetBSD
1551816037,,ui,info,
1551816037,,ui,info,f8f6eff
1551816037,,ui,info,default
1551816037,,ui,info,virtualbox
1551816037,,ui,info,poweroff
1551816037,,ui,info,/home/alfa/dev/vagrant/fedora
1551816037,,ui,info,
1551816037,,ui,info, \nThe above shows information about all known Vagrant environments\non this machine. This data is cached and may not be completely\nup-to-date (use "vagrant global-status --prune" to prune invalid\nentries). To interact with any of the machines%!(VAGRANT_COMMA) you can go to that\ndirectory and run Vagrant%!(VAGRANT_COMMA) or you can use the ID directly with\nVagrant commands from any directory. For example:\n"vagrant destroy 1a2b3c4d"
```
and still takes 500ms to do so. The actual information is in a json
file, which we can't expect to read, and it doesn't have linebreaks or
such which we could use to hack-parse it.
So this is the best we can do for the most important bits (the
machineids), so let's just add this as-is.
[ci skip]
`ipset list --name` is a privileged operation, and it prints an
"Operation not permitted" error when done as a normal user.
What's worse, this did it on loading (the command substitution wasn't
quoted), so we'd print the error as soon as you did `ipset `.
Only do the operation when necessary, and don't print the error.
This'll effectively only make it work for root shells (not e.g. `sudo
ipset`), but I don't want to sprinkle `sudo` in the completion.
(Also why does listing stuff require root? That's not how it works
e.g. for ips. But I don't actually know what ipset is for, so maybe
there is a good reason.)
[ci skip]
A key frustration with the prior version of mkvextract completions was
that even in a position where a filename would be expected, no
completions for a filename were offered. This update introduces more
rigorous argument handling, most importantly restricting
track/attachment completion to when both a mode and a file are
specified.
