This reduces the test time by ~33% on my system (23s to 15s)
Given that it takes ~180-240s on Github Actions, if we get a reduction
like that we can save over a minute.
We only use this
1. if we have localeconv_l
2. to get the decimal point / thousands separator for numbers
So we can ignore all this and directly create a purely LC_NUMERIC locale.
This *was* more useful when we were in C++ and the printing functions
all relied on locale, but we only use this in printf and that only
extracts the number stuff.
Commit b768b9d3f (Use fuzzy subsequence completion for options names as well,
2024-01-27) allowed completing "oa" to "--foobar", which is a false positive,
especially because it hides other valid completions of non-option arguments.
Let's at least require a leading dash again before completing option names.
The lines of code I commented on in #10254 were meant to serve only as examples
of the changes I was requesting, not the only instances.
Also just use `Mode::from_bits_truncate()` instead of unsafe or unwrapping since
we know the modes are correct.
* Fix build on NetBSD
Notably:
1. A typo in `f_flag` vs `f_flags` - this was probably never tested
2. Some pointless name differences - `st_mtimensec` vs
`st_mtime_nsec`
3. The big one: This said that LC_GLOBAL_LOCALE() was -1 "everywhere".
Well, not on NetBSD.
* ifdef for macos
Version 2.1.0 introduced subsequence matching for completions but as the
changelog entry mentions, "This feature [...] is not yet implemented for
options (like ``--foobar``)". Add it. Seems like a strict improvement,
pretty much.
.unwrap() is in effect an assert(). If it is applied mistakenly, the
program crashes and there isn't a good error.
I would like it to be used as a last resort. In these cases there are
nicer ways to do it that handle a missing result properly.
Issue #10194 reports Cobra completions do
set -l args (commandline -opc)
eval $args[1] __complete $args[2..] (commandline -ct | string escape)
The intent behind "eval" is to expand variables and tildes in "$args".
Fair enough. Several of our own completions do the same, see the next commit.
The problem with "commandline -o" + "eval" is that the former already
removes quotes that are relevant for "eval". This becomes a problem if $args
contains quoted () or {}, for example this command will wrongly execute a
command substituion:
git --work-tree='(launch-missiles)' <TAB>
It is possible to escape the string the tokens before running eval, but
then there will be no expansion of variables etc. The problem is that
"commandline -o" only unescapes tokens so they end up in a weird state
somewhere in-between what the user typed and the expanded version.
Remove the need for "eval" by introducing "commandline -x" which expands
things like variables and braces. This enables custom completion scripts to
be aware of shell variables without eval, see the added test for completions
to "make -C $var/some/dir ".
This means that essentially all third party scripts should migrate from
"commandline -o" to "commandline -x". For example
set -l tokens
if commandline -x >/dev/null 2>&1
set tokens (commandline -xpc)
else
set tokens (commandline -opc)
end
Since this is mainly used for completions, the expansion skips command
substitutions. They are passed through as-is (instead of cancelling or
expanding to nothing) to make custom completion scripts work reasonably well
in the common case. Of course there are cases where we would want to expand
command substitutions here, so I'm not sure.
Move all qmark tests to `scoped_test()` sections with explicitly set feature
flags. We already test the default qmark behavior in the functionality tests.
It seems the logic for calculating the cursor position was not ported correctly,
because the correct place to insert it is at the cursor_pos regardless of
range.start, going by the parameters submitted to the function and the expected
result.
This allows running a fish built from `cargo build` *and* built via
cmake.
In future, we should make this an optional thing that's removed from
installed builds.
NCurses headers contain this conditional "#define cur_term":
print "#elif @cf_cv_enable_reentrant@"
print "NCURSES_WRAPPED_VAR(TERMINAL *, cur_term);"
print "#define cur_term NCURSES_PUBLIC_VAR(cur_term())"
print "#else"
OpenSUSE Tumbleweed uses this configuration option; For reentrancy, cur_term
is a function. If the NCurses autoconf variable @NCURSES_WRAP_PREFIX@
is not changed from its default, the function is called _nc_cur_term.
I'm not sure if we have a need to support non-default @NCURSES_WRAP_PREFIX@
but if we do there are various ways;
- search for the symbol with the cur_term suffix
- figure out the prefix based on the local curses installation,
for example by looking at the header files.
Fixes#10243
This is run in the current locale, without resetting to en_US.UTF-8
like our integration tests do.
So if you want to check for a specific message you need to check the
localized version.
This was previously limited to Linux predicated on the existence
of certain headers, but Rust just exposes those functions unconditionally. So
remove the check and just perform the mtime hack on Linux and Android.
Make sure to also look for the error part that occurs after the last format
specifier.
Still not great because it won't fail if there's unexpected output at the
beginning or end of the string.
Commit 5f849d0 changed control-C to print an inverted ^C and then a newline.
The original motivation was
> In bash if you type something and press ctrl-c then the content of the line
> is preserved and the cursor is moved to a new line. In fish the ctrl-c just
> clears the line. For me the behaviour of bash is a bit better, because it
> allows me to type something then press ctrl-c and I have the typed string
> in the log for further reference.
This sounds like a valid use case in some scenarios but I think that most
abandoned commands are noise. After all, the user erased them. Also, now that
we have undo that can be used to get back a limited set of canceled commands.
I believe the original motivation for existing behavior (in other shells) was
that TERM=dumb does not support erasing characters. Similarly, other shells
like to leave behind other artifacts, for example when using tab-completion
or in their interactive menus but we generally don't.
Control-C is the obvious way to quickly clear a multi-line commandline.
IPython does the same. For the other behavior we have Alt-# although that's
probably not very well-known.
Restore the old Control-C behavior of simply clearing the command line.
Our unused __fish_cancel_commandline still prints the ^C. For folks who
have explicitly bound ^C to that, it's probably better to keep the existing
behavior, so let's leave this one.
Previous attempt at #4713 fizzled.
Closes#10213
This function is a hotspot, but it has inefficient codegen:
1. For whatever reason, the chars() iterator of wstr is slower
than that of a slice. Use the slice.
2. Unnecessary overflow checks were preventing vectorization.
Switch to a more optimized implementation.
This improves aliases benchmark time by about 9%.
Since none of the compiles(xxx) calls are to particularly complex code, we can
just use `rsconf` directly to test for the presence of the symbols or headers as
needed.
Note that it seems at least some of the previous detection was not working
correctly; in particular HAVE_PIPE2 was evaluating to false on my WSL install
where pipe2(2) was available (caught because it revealed some compilation errors
in that conditional compilation path after porting).
I kept the cfg names and the tests themselves mostly as-is, though we might want
to change that to conform with the rust convention of lowercase cfg names and
decide whether we want to prefix all these with have_, fish_, or nothing at all.
Also the posix_spawn() test should probably check for the symbol `posix_spawn()`
rather than the header `spawn.h` since we don't use it via the header but rather
via the symbol (but in reality they're almost certainly going to give the same
result).
NB: I only encountered this when rewriting the cfg detection, which means that
the previous detection wasn't correct since I have pipe2 on Linux but didn't run
into this build error before.
I had originally created a safe `set_locale()` wrapper and clippy-disallowed
`libc::setlocale()` but almost all our uses of `libc::setlocale()` are in a loop
where it makes much more sense to just obtain the lock outright then call
`setlocale()` repeatedly rather than lock it in the wrapper function each time.
No need to use cfg_attr and have to worry about syncing the preconditions for
the cfg_attr with the preconditions for where `slice_contains_slice()` is used
in the codebase, just mark it as `allow(unused)` with a comment.
Use Rust for executables
Drops the C++ entry points and restructures the Rust package into a
library and three binary crates.
Renames the fish-rust package to fish.
At least on Ubuntu, "fish_indent" is built before "fish".
Make sure export CURSES_LIBRARY_LIST to all binaries to make sure
that "cached-curses-libnames" is populated.
Closes#10198
Keep running tests serially to avoid breaking assumptions.
I think many of these tests can run in parallel and/or don't need test_init().
Use the safe variant everywhere, to get it done faster.
This would misname `\e\x7F` as "backspace":
bind -k backspace 'do something'
bind \e\x7F 'do something'
because it would check if there was any key *in there*.
This was probably meant for continuous mode, but it simply doesn't
work right. It's preferable to not give a key when one would work over
giving one when it's not correct.
This implements input and input_common FFI pieces in input_ffi.rs, and
simultaneously ports bind.rs. This was done as a single commit because
builtin_bind would have required a substantial amount of work to use the input
ffi.
The existing subsequence search commonly returns false positives.
Support globs, to allow searching for disconnected substrings in a better way.
Closes#10143Closes#10131
The "#[bench]" attribute is not allowed in stable Rust, so keep it behind
a new feature flag. Run on nightly Rust with
$ cargo bench --features=bechmark
test tests::encoding::bench::bench_convert_ascii ... bench: 125,988 ns/iter (+/- 1,128) = 1040 MB/s
Drop support for history file version 1.
ParseExecutionContext no longer contains an OperationContext because in my
first implementation, ParseExecutionContext didn't have interior mutability.
We should probably try to add it back.
Add a few to-do style comments. Search for "todo!" and "PORTING".
Co-authored-by: Xiretza <xiretza@xiretza.xyz>
(complete, wildcard, expand, history, history/file)
Co-authored-by: Henrik Hørlück Berg <36937807+henrikhorluck@users.noreply.github.com>
(builtins/set)
This reduces noise in the upcoming "Port execution" commit.
I accidentally made IoStreams a "class" instead of a "struct". Would be
easy to correct that but this will be deleted soon, so I don't think we care.
These printed "Unknown error while evaluating command substitution".
Now they print something like
```
fish: for: status: cannot overwrite read-only variable
for status in foo; end
^~~~~^
in command substitution
fish: Invalid arguments
echo (for status in foo; end)
^~~~~~~~~~~~~~~~~~~~~~~^
```
for `echo (for status in foo; end)`
This is, of course, still not *great*. Mostly the `fish: Invalid
arguments` is basically entirely redundant.
An alternative is to simply skip the error message, but that requires some
more scaffolding (describe_with_prefix adds some error messages on its
own, so we can't simply say "don't add the prefix if we don't have a
message")
(cherry picked from commit 1b5eec2af6)
* wildcard: Remove file size from the description
We no longer add descriptions for normal file completions, so this was
only ever reached if this was a command completion, and then it was
only added if the file wasn't a regular file... in which case it can't
be an executable.
So this was dead.
* Make possible_link() a maybe
This gives us the full information, not just "no" or "maybe"
* wildcard: Rationalize file/command completions
This keeps the entry_t as long as possible, and asks it, so especially
on systems with working d_type we can get by without a single stat in
most cases.
Then it guts file_get_desc, because that is only used for command
completions - we have been disabling file descriptions for *years*,
and so this is never called there.
That means we have no need to print descriptions about e.g. broken symlinks, because those are not executable.
Put together, what this means is that we, in most cases, only do
an *access(2)* call instead of a stat, because that might be checking
more permissions.
So we have the following constellations:
- If we have d_type:
- We need a stat() for every _symlink_ to get the type (e.g. dir or regular)
(this is for most symlinks, if we want to know if it's a dir or executable)
- We need an access() for every file for executables
- If we do not have d_type:
- We need a stat() for every file
- We need an lstat() for every file if we do descriptions
(i.e. just for command completion)
- We need an access() for every file for executables
As opposed to the current way, where every file gets one lstat whether
with d_type or not, and an additional stat() for links, *and* an
access.
So we go from two syscalls to one for executables.
* Some more comments
* rust link option
* rust remove size
* rust accessovaganza
* Check for .dll first for WSL
This saves quite a few checks if e.g. System32 is in $PATH (which it
is if you inherit windows paths, IIRC).
Note: Our WSL check currently fails for WSL2, where this would
be *more* important because of how abysmal the filesystem performance
on that is.
Given an env like
foo
bar=baz
we would set "foo" to empty due to a typo.
The typo is pointed out by a PORTING comment.
Luckily I don't think we ever hit this case because that would mean our
parent process has a serious bug. Rust's std::env::vars_os() skips env
lines that don't contain a "=" char. This seems like a reasonable behavior
for us too. Do that.
This makes it so expand_intermediate_segment knows about the case
where it's last, only followed by a "/".
When it is, it can do without the file_id for finding links (we don't
resolve the files we get here), which allows us to remove a stat()
call.
This speeds up the case of `...*/` by quite a bit.
If that last component was a directory with 1000 subdirectories we
could skip 1000 stat calls!
One slight weirdness: We refuse to add links to directories that we already visited, even if they are the last component and we don't actually follow them. That means we can't do the fast path here either, but we do know if something is a link (if we get d_type), so it still works in common cases.
This can be bound like `bind \cl clear-screen`, and is, by default
In contrast to the current way it doesn't need the external `clear`
command that was always awkward.
Also it will clear the screen and first draw the old prompt to remove
flicker.
Then it will immediately trigger a repaint, so the prompt will be overwritten.
This fixes the following deadlock. The C++ functions path_get_config and
path_get_data lazily determine paths and then cache those in a C++ static
variable. The path determination requires inspecting the environment stack.
If these functions are first called while the environment stack is locked
(in this case, when fetching the $history variable) we can get a deadlock.
The fix is to call them eagerly during env_init. This can be removed once
the corresponding C++ functions are removed.
This issue caused fish_config to fail to report colors and themes.
Add a test.
