Let's hope this doesn't causes build failures for e.g. musl: I just
know it's good on macOS and our Linux CI.
It's been a long time.
One fix this brings, is I discovered we #include assert.h or cassert
in a lot of places. If those ever happen to be in a file that doesn't
include common.h, or we are before common.h gets included, we're
unawaringly working with the system 'assert' macro again, which
may get disabled for debug builds or at least has different
behavior on crash. We undef 'assert' and redefine it in common.h.
Those were all eliminated, except in one catch-22 spot for
maybe.h: it can't include common.h. A fix might be to
make a fish_assert.h that *usually* common.h exports.
This reimplements ridiculousfish/control_r which is a more future-proof
approach than #6686.
Pressing Control+R shows history in our pager and allows to search filter
commands with the pager search field.
On the surface, this works just like in other shells; though there are
some differences.
- Our pager shows multiple results at a time.
- Other shells allow to use up arrow/down arrow to select adjacent entries
in history. Shouldn't be hard to implement but the hidden state might
confuse users and it doesn't play well with up-or-search, so this is
left out.
Users might expect the history pager to use subsequence matching (fuzzy
matching) like the completion pager, however due to the history pager design it
uses substring matching. We could change this in future, however that means
we would also want to change the ordering from "reverse-chronological" to
"longest common subsequence" (e.g. what fuzzy finders do), because otherwise
a query "fis" might give this ordering:
fsck /dev/disk/by-partlabel/Linux\x20filesystem
fish
which is probably not what the user wants.
The pager shows only a small number of history items at a time. This is
because, as explained above, the history pager does not support subsequence
matching, so navigating it does not scale well.
Closes#602
Or should we stop using it?
I'm fine with either always or never using auto-formatting but our current
way of using it only sometimes is confusing.
No functional change.
Previously, `kill-whole-line` kills the line and its following
newline. This is insufficient when we are on the last line, because
it would not actually clear the line. The cursor would stay on the
line, which is not the correct behavior for bindings like `dd`.
Also, `cc` in vi-mode used `kill-whole-line`, which is not correct
because it should not remove any newlines. We have to introduce
another special input function (`kill-inner-line`) to fix this.
Prior to this commit, setting a universal variable may trigger syncing
against the file which will modify other universal variables. But if we
want to support multiple environments we need the parser to decide when to
sync uvars. Shift the decision of when to sync to the parser itself. When a
universal variable is modified, now we just set a flag and it's up to the
(main) parser when to pick it up. This is hopefully just a refactoring with
no user-visible changes.
Say the user has a multi-char binding (typically an escape sequence), and a
signal arrives partway through the binding. The signal has an event handler
which enques some readline event, for example, `repaint`. Prior to this
change, the readline event would cause the multi-char binding to fail. This
would cause bits of the escape sequence to be printed to the screen.
Fix this by noticing when a sequence was "interrupted" by a non-char event,
and then rotating a sequence of such interruptions to the front of the
queue.
Fixes#8628
check_exit events are generated to give the reader a chance to respond to
commands, or otherwise to return control to the reader loop. Prior to this
change they were being passed to match key bindings. This is useless since
no key binding can match a check_exit event. FLOG noisily complains about
unmatched events. So just don't pass these to mapping_execute.
This allows rebinding escape in the user list without breaking e.g.
arrow keys (which send escape and then `[A` and similar, so escape is
a prefix of them).
Fixes#8428.
When the user presses control-C, fish marks a cancellation signal which
prevents fish script from running, allowing it to properly unwind.
Prior to this commit, the signal was cleared in the reader. However this
missed the case where a binding would set $fish_bind_mode which would
trigger event handlers: the event handlers would be skipped because of
the cancellation flag was still set. This is similar to #6937.
Let's clear the flag earlier, as soon as we it's set, in inputter_t.
Fixes#8125.
This concerns printing status messages for background jobs which have
stopped or finished. Previously fish would do this from two places:
1. Before running a command (including empty string)
2. If a signal is received during select()
So if the job finishes while fish is doing something else (like running an
event handler) then we would not print status messages until the user hit
return. This caused the job_summary.py test to be flaky.
Fix this by splitting the interrupt handler into two parts: a part that
handles signals (e.g. triggering exit from the reader), and a part that
always runs just before blocking in select(). This second part always
reaps jobs and prints their status messages. This narrows the window for a
job exit to be "missed" before fish blocks in select, and should make the
job_summary.py test more reliable.
This concerns the problem of "injecting" fancy fish bits like job reaping
into the "common" input stuff which is also used by fish_key_reader.
Instead of providing a callback, make the input event queue a base class
with virtual functions. This allows for a richer interface and simplifies
some memory management issues.
readb is used to read a single byte from stdin, or maybe update universal
variables, or maybe invoke completion handlers, etc. Previously it
returned char_event_t but this is more complex than necessary; instead we
can just have it return a single byte, or one of a few special error
codes. This makes the readb's role more clear.
"The" interrupt handler is used when we get a signal while waiting at the
prompt. Switch it from a global function pointer to an std::function. This
is a mild refactoring which itself will be replaced soon.
Now that timeouts are stored in the event queue peeker, we can remove the
notion of timeout events altogether. Instead you may ask for an event with
a timeout, and get back none on timeout. This simplifies how input events
work.
Previously, when attempting to match a key binding, we would dequeue
events from the queue and put them back on if the binding fails. The
tricky part is timeouts: distinguishing between an escaped character and
the escape key itself. This was handled with "timeout events" and we had
to be careful to know when to discard them.
Switch to a new model: use event_queue_peeker more pervasively.
Temporarily dequeued events are stored in the peeker, and the peeker
itself remembers when it has seen a timeout. This is in preparation for
removing the idea of "timeout events" altogether.
Make it an ordinary struct wrapping a vector, instead of a template.
This is in preparation for using it more widely, for matching bindings
as well as mouse CSI sequences.
Also add some mouse-disabling tests.
They are of variable length, taking semicolon-separated ASCII characters
and not single chars/bytes as the parameters. Additionally, the global
maximum size for a CSI is 16 characters (NPAR), even though I believe
the maximum possible mouse-tracking CSI is 12 characters.
Bind \cc like normal, since we now no longer use a function, and bind
some important control bindings like \cs and the ever-important emacs \cb/f/p/n.
What really kills the usability here is the up-line vs up-or-search.
These functions are called in the event queue hot path every time an
input event takes place. If we could guarantee a maximum length of
non-char (i.e. readline) events in the queue, we could use
`event_queue_peeker_t` with a fixed storage size of, e.g., 32 events,
but I'm not sure what a reasonable number would in fact be, so I'm just
changing these to use a thread-local vector that will re-use its
previous heap allocation in subsequent invocations rather than thrashing
the heap.
The lookups are executed on all input events, so they are worth
optimizing.
Cache the list of names, use binary search to get a function code from a
name, and stop enumerating mappings after `has_function` and `has_command`
have been determined.
Fish was previously oblivious to the existence of mouse-tracking ANSI
escapes; this was mostly OK because they're disabled by default and we
don't enable them, but if a TUI application that turned on mouse
reporting crashed or exited without turning mouse reporting off, fish
would be left in an unusable state as all mouse reporting CSI sequences
would be posted to the prompt.
This can be tested by executing `printf '\x1b[?1003h'` at the prompt,
then clicking with any mouse button anywhere within the terminal window.
Previously, this would have resulted in seeming garbage being spewed to
the prompt; now, fish detects the mouse tracking CSIs posted to stdin by
the terminal emulator and a) ignores them to prevent invalid input, as
well as b) posts the CSI needed to disable future mouse tracking events
from being emitted on subsequent mouse interactions (until re-enabled).
Note that since we respond to a mouse tracking CSI rather than
pre-emptively disable mouse reporting, we do not need to do any sort of
feature detection to determine whether or not the terminal supports
mouse reporting (otherwise, if it didn't support it and we posted the
CSI anyway, we'd end up with exactly the kind of cruft posted to the
prompt that we're trying to avoid).
Fixes#4873
This is a stack-allocating utility class to peek up to N
characters/events out of an `event_queue_t` object. The need for a
hard-coded maximum peek length N at each call site is to avoid any heap
allocation, as this would be called in a hot path on every input event.
This allows directly inserting multiple characters/events in one go at
the front of the input queue, instead of needing to add them one-by-one
in reverse order.
In addition to improving performance in case of fragmented dequeue
allocation, this also is less error prone since a dev need not remember
to use reverse iterators when looping over a vector of peeked events.
This allows for multiple edits to be undone/redone in one go, as if they
were one edit.
Useful when a function is editing the commandline buffer via scripted
changes or via a keybinding so the internal changes to the buffer can be
abstracted away.
(Having extreme difficulty getting pexpect to play nice with the concept
of undo/redo...)
Currently binding `exit` to a key checks too late that it's exitted,
so it leaves the shell hanging around until the user does an execute
or similar.
As I understand it, the `exit` builtin is supposed to only exit the
current "thread" (once that actually becomes a thing), and the
bindings would probably run in a dedicated one, so the simplest
solution here is to just add an `exit` bind function.
Fixes#7604.
Prior to this change, for bindings which have script commands, the
inputter would execute them directly. However an upcoming fix for #7483
will require more integration with the reader. Switch to a new model where
the reader passes in a function to use for executing script commands.
When typing into the command line, some actions should trigger repainting,
others should kick off syntax highlighting or autosuggestions, etc. Prior
to this change, these were all triggered in an ad-hoc manner. Each
possible
This change centralizes the logic around repainting. After each readline
command or text change, we compute the difference between what we would
draw and what was last drawn, and use that to decide whether to repaint
the screen.
This is a fairly involved change. Bugs here would show up as failing to
redraw, not reacting to a keypress, etc. However it better factors the
readline command handling from the drawing.
