A history search ends when you move the cursor, but the commandline inserted by
history search is still marked as transient. This means that the next history
search will clear the transient commandline. This means we are dropping an undo
point, for example:
echo 11
echo 1
echo autosuggestion
echo^P # commandline is "echo 1"
^A # stop history search
^P # commandline is "echo 11"
^Z # Bug: commandline goes back to "echo", but it should be "echo 1"
In the worst case, we are switching from line-search to token-search (see
the attached test case). Clearing the transient edit means the line is gone
and only the token is left on the command line.
fish outputs the result of fish_title inside an escape sequence, which
happens to be terminated by \a (BEL). It may happen that the initial
output is interrupted; fish then emits the closing BEL and that makes an
annoying beep. Output the fish_title all at once, even if a signal is
delivered (so we don't get "stuck inside" the sequence).
This is related to #8628 in that it's a "torn escape sequence."
Say the user has a multi-char binding (typically an escape sequence), and a
signal arrives partway through the binding. The signal has an event handler
which enques some readline event, for example, `repaint`. Prior to this
change, the readline event would cause the multi-char binding to fail. This
would cause bits of the escape sequence to be printed to the screen.
Fix this by noticing when a sequence was "interrupted" by a non-char event,
and then rotating a sequence of such interruptions to the front of the
queue.
Fixes#8628
readch_timed is called after reading the escape character \x1b. The escape
char may be a standalone key press or part of an escape sequence; fish
waits for a little bit (per the fish_escape_delay_ms variable) to see if
something else arrives, before treating it as standalone escape-key press.
It may happen that a signal is delivered while fish waits. Prior to this
change we would treat this signal as a "nothing was read" event, causing
escape to be wrongly treated as standalone.
Avoid this by using pselect() with a full signal mask, to ensure this call
completes.
check_exit events are generated to give the reader a chance to respond to
commands, or otherwise to return control to the reader loop. Prior to this
change they were being passed to match key bindings. This is useless since
no key binding can match a check_exit event. FLOG noisily complains about
unmatched events. So just don't pass these to mapping_execute.
The previous commit added transient commandlines when completing
commands with variable overrides. Transient commandlines require a
parser, but perform_one_completion_cd_test() asked for completions
without giving a parser, which is only okay when asking for
autosuggestions (like perform_one_autosuggestion_cd_test() does).
Let's pass a parser to fix the test.
Today, a command like "var=val status " has custom completions
because we skip over the var=val variable override when detecting
the command token.
However if the custom completions read the commandline state (via
"commandline -opc") they do see they variable override, which breaks
them, most likely. Try "a=b git ".
For completions of wrapped commands, we already set a transient
commandline. Do the same for commands with leading variable overrides;
then git completions for "a=b git " will think the commandline is
"git ".
This updates widecharwidth to
6d3d55b419db93934517cb568d1a3d95909b4c7b, which includes the same
Hangul Jamo check in a separate table.
This should slightly speed up most width calculation because we no
longer need to do it for most chars, including the overwhelmingly
common ascii ones.
Also the range is increased and should better match reality.
`read` allows specifying the initial command line text. This was
text got accidentally ignored starting in a32248277f. Fix this
regression and add a test.
Fixes#8633
Both constant values and functions are represented as `te_fun_t`.
This struct defines `operator()` which evaluates the function with the
given arguments.
Previously, when we got an unknown option with --ignore-unknown, we
would increment woptind but still try to read the same contents.
This means in e.g.
```
argparse -i h -- -ooo -h
```
The `-h` would also be skipped as an option, because after the first
`-o` getopt reads the other two `-o` and skips that many options.
This could be handled more extensively in wgetopt, but the simpler fix
is to just skip to the next argv entry once we have an unknown option
- there's nothing more we can do with it anyway!
Additionally, document this and clearly explain that we currently
don't transform the option.
Fixes#8637
The sole notifiers test recreated the uvar directory, so if it was
called while the universal test was running it would stop it from
completing correctly.
This happened reasonably often on Ubuntu with tsan on Github Actions.
Cygwin tests are failing because cygwin has a low limit of only 64 fds in
select(). Extend select_wrapper_t to also support using poll(), according to
a FISH_USE_POLL new define. All systems now use poll() except for Mac.
Rename select_wrapper_t to fd_readable_set_t since now it may not wrap
select().
This allows the deep-cmdsub.fish test to pass on Cygwin.
This affects the caret position. In an expression like
123 456
we previously reported:
123 456
^ missing operator
Now we do:
123 456
^ missing operator
We do it on the first space, which should be acceptable.
(no need for a changelog entry, we have already ignored #8511)
This unit test was passing 0 instead of a pointer to indicate the end of
a varargs; this might fail on 64 bit, and indeed did fail on Cygwin. This
fixes the Cygwin expand test.
Only show the shebang warning for .fish commands.
Use the phrase "interpreter directive" as the formal name for the
shebang.
Switch from windows to Windows for the operating system.
There is no undefined behavior in closing a moved pipe, since the
move constructor simply sets the fd to -1, which is ignored by close().
The move constructor of autoclose_fd_t is "fully specified" (like
unique_ptr).
It's good practice to eagerly close pipes which may be inherited by
child processes, since otherwise the writer may not get EPIPE correctly.
Closing the pipe explicitly makes it clear that the pipe does not stay
open across continue_job().
This reverts commit c014c23662.
"not not return 34" exits with 34, not 1. This behavior is pretty
surprising but benign. I think it's very unlikely that anyone relies
on the opposite behavior, because using two "not" decorators in one
job is weird, and code that compares not's raw exit code is rare.
The behavior doesn't match our docs, but it's not worth changing the
docs because that would confuse newcomers. Add a test to cement the
behavior and a comment to explain this is intentional.
I considered adding the comment at
parse_execution_context_t::populate_not_process where this behavior
is implemented but the field defintion seems even better, because I
expect programmers to read that first.
Closes#8377
When we execute something and it doesn't have a shebang, typically we
fall back on running it with /bin/sh. For .fish scripts, we still
refuse to do this (assuming that /bin/sh won't handle .fish scripts properly).
Only the error wasn't great. So we now explicitly mention when there's
a missing shebang, and point towards the shebang line otherwise.
Seems like size_t is unnecessarily large as well, as elsewhere
in the code we are clamping down to uint32_t / source_offset_t.
This makes tok_t more like 16 bytes. More cleanup seems desirable,
this is not very well hamrnoized across our code base.
Instead of 7a80ad74f, which adds ifdeffery, we simply drop the
variables we don't care about. This leaves two presumably
glibc-specific variables, but drops 5 variables like LC_MONETARY, so
it's overall a win.
This reverts commit 7a80ad74f4.
The builtin history delete call has some code that removes a leading and
trailing quote from its arguments. This code dates back to ec34f2527a,
when the builtin was introduced. It seems wrong and tests pass
without it. Let's bravely remove it.
Use the remaining_to_disclose count to determine if all completions
are shown (allows consistent behavior between short and long completion
lists).
Closes#8485
Commit e40eba358 (Treat text following quoted command substitution
as quoted) made parse_util_locate_cmdsubst_range() aware of quoted
command substitutions, by skipping surrounding text via quote_end().
However, it was not quite right. We fail to properly parse
two consecutive command substitutions in the same string,
because we don't maintain the quoting context across calls to
parse_util_locate_cmdsubst_range(). Let's track that bit in a
parameter. This allows us to get rid of the quote_end() hack.
Also apply this to the other place where we call
parse_util_locate_cmdsubst_range() in a loop (highlighting).
Fixes#8500
This fixes a regression about where we report errors:
echo error(here
old: ^
fixed: ^
Commit 0c22f67bd (Remove the old parser bits, 2020-07-02) removed
uses of "error_offset_within_token" so we always report errors at
token start. Add it back, hopefully restoring the 3.1.2 behavior.
Note that for cases like
echo "$("
we report "unbalanced quotes" because we treat the $( as double
quote. Giving a better error seems hard because of the ambguity -
we don't know if quote is meant to be inside or outside the command
substitution.
If you make a script called `foo` somewhere in $PATH, and did not give
it a shebang, this would end up calling
sh foo
instead of
sh /usr/bin/foo
which might not match up.
Especially if the path is e.g. `--version` or `-` that would end up
being misinterpreted *by sh*.
So instead we simply pass the actual_cmd to sh, because we need it
anyway to get it to fail to execute before.
I think the auto-all-the-things here was a making this a little
hard to follow, so replace these things that will be used in printf
with what they really are. And change the * lengths to ints.
should clear up the alerts.
When the completion pager fills up all lines of the screen, we subtract
from the pager size the number of lines occupied by the prompt +
command line buffer (typically 1), so the command line is always
visible. However, we only subtract the number of lines *before* the
cursor, so on some multiline commandlines we draw a pager that is
too large for our screen, clobbering the commandline rendering.
Fix this by counting all lines.
Fixes#8509
Possibly fixes#8405
As seen in
https://stackoverflow.com/questions/70139844/how-to-execute-custom-fish-scripts-in-custom-path-folder,
making a shebang like
#!usr/bin/fish
won't work, and will error with the default "file does not exist"
error *pointing to the file, not the interpreter*.
Detect that interpreter properly.
We might want to make this an even more specific error, but now it
says
```
exec: Failed to execute process '/home/alfa/.local/bin/borken.fish': The file specified the interpreter 'usr/bin/fish', which is not an executable command.
```
Which is okay.
A command like "printf nonewline | sed s/x/y/" does not print a
concluding newline, whereas "printf nnl | string replace x y" does.
This is an edge case -- usually the user input does have a newline at
the end -- but it seems still better for this command to just forward
the user's data.
Teach most string subcommands to check if stdin is missing the trailing
newline, and stop adding one in that case.
This does not apply when input is read from commandline arguments.
* Most subcommands stop adding the final newline, because they don't
really care about newlines, so besides their normal processing,
they just want to preserve user input. They are:
* string collect
* string escape/unescape
* string join¹
* string lower/upper
* string pad
* string replace
* string repeat
* string sub
* string trim
* string match keeps adding the newline, following "grep". Additionally,
for string match --regex, it's important to output capture groups
separated by newlines, resulting in multiple output lines for an
input line. So it is not obvious where to leave out the newline.
* string split/split0 keep adding the newline for the same reason --
they are meant to output multiple elements for a single input line.
¹) string join0 is not changed because it already printed a trailing
zero byte instead of the trailing newline. This is consistent
with other tools like "find -print0".
Closes#3847
A completion entry like «complete -a '\\~'» results in completions
that insert \~ into the command line. However we usually want to
insert ~, but there is no way to do that.
There are a couple of longstanding issues about completion escaping
[1]. Until we fix those in a general way, fix the common case by
never escaping tildes when applying custom completions to the command
line. This is a hack but will probably work out fine because we don't
expect literal tildes in arguments.
The tilde is included in completions for cdh, or
__fish_complete_suffix, which simply forwards results from "complete
-C". Revert a workaround to cdh that expanded ~, because we can now
render that without escaping.
Closes#4570, #8441
[ja: tweak patch and commit message]
[1]: https://github.com/fish-shell/fish-shell/pull/8441#discussion_r748803338
A «complete -C '~/fish-shell/build/fish '» fails to load custom
completions because we do not expand the ~, so
complete_param_for_command() thinks that this command is invalid.
Expand command tokens before loading custom completions.
Fixes#8442
Currently,
set -q --unpath PATH
simply ignores the "--unpath" bit (and same for "--path").
This changes it, so just like exportedness you can check pathness.
* fish_key_reader: Simplify default output
It now only prints the bind statement. Timing information and such is
relegated to a separate "verbose" mode.
* Adjust fish_key_reader docs
* Adjust tests
What this did was
1. Find directory
2. Turn name into wcstring and return it
3. Turn name back into string for some operations
Instead, let's unglue the wcstringing from this, return the narrow
string and then widen it when we need.
This didn't even mention that it was a script file, it was just
filename: File not found
Which would be rather confusing if e.g. someone forgot that
`--profile` requires an argument.
This finds the first broken component, to help people figure out where
they misspelt something.
E.g.
```
echo foo >/usr/lob/systemd/system/machines.target.wants/var-lib-machines.mount
```
will now show:
```
warning: Path '/usr/lob' does not exist
```
which would help with seeing that it should be "/usr/lib".
Commit fe63c8ad3 (Shadow/override iswdigit instead of changing it at
individual call sites, 2021-10-04) added our own implementation of
iswdigit() to common.h. The "include-what-you-use" rule means that
files that use iswdigit() should now include common.h. Do that.
A variable may be broken across multiple lines with a backslash, for
example:
> echo $FISH_\
VERSION
Teach syntax highlighting about this line breaking. Fixes#8444
check_global_scope_exists is meant to warn if the user creates a
universal variable shadowing a global. In practice it always returned
success (though it may print an error). Remove its return value and
clean up the call sites. Also rename it to
`warn_if_uvar_shadows_global`. No functional change in this commit.
On a commandline like "ls arg" (cursor at end) we do not expand
abbrevations on enter. OTOH, on "ls " we do expand. This can be
frustrating because it means that the two obvious ways to suppress
abbrevation expansion (C-Space or post-expansion C-Z) cannot be used to
suppress expansion of a command without arguments. (One workaround is
"ls #".)
Only expand-on-execute if the cursor is at the command name (no space
in between).
This is a strict improvement for realistic scenarios, because if there
is a space, the user has already expressed the intent to not expand
the abbreviation. (I hope no one is using recursive abbreviations.)
Closes#8423
This allows to disable autosuggestions in config or with
fish -C 'set -g fish_autosuggestion_enabled 0'
instead of only in existing interactive sessions.
I'm not sure if passing the env var table is actually necessary here,
since we already have a reader.
This allows rebinding escape in the user list without breaking e.g.
arrow keys (which send escape and then `[A` and similar, so escape is
a prefix of them).
Fixes#8428.
+ No functional change here, just renames and #include changes.
+ CMake can't have slashes in the target names. I'm suspciious of
that weird machinery for test, but I made it work.
+ A couple of builtins did not include their own headers, that
is no longer the case.
Very slight performance increase (1% when parsing *all .fish scripts
in fish-shell*), but this removes a useless variable and some
.c_str()inging.
Theoretically it should also remove some wcslen() calls, but those
seem to be optimized out?
This fixes printing octal and hex values that are negative or larger
than UINT_MAX.
Negative values get a leading -, like:
> math --base hex -10
-0xa
Fixes#8417.
(or use the correct specifiers for the type if we can.)
These are hard to track down because we can't get compile-time
warnings for the wprintf family of in libc like is possible for
the narrow versions.
- Introduce BUILTIN_ERR_COMBO2_EXCLUSIVE
- Distill generally more terse, unambiguous error descriptions.
Remember English is not everyone's language.
- Do not capitalize sentence fragments
- Use the modality where problem input is in a %s: prefix, then
is explained.
- Do not address the user (the "You cannot do ..." kraderism)
- Spell out 'arguments' rather than 'args' for consistency
- Mention 'function' as a scope
Watching for exit events is rare, so check if we have any exit events
before actually emitting them. This saves about 2% of time in
external_cmds benchmark.
This untangles some of the complicated logic and loops around posting
job exit events, and invoking the fish_job_summary function. No
functional change here (hopefully).
Prior to this change, job_t::is_stopped() returned true if there were
zero running processes in the job. This meant that completed jobs were
reported as stopped. Stop doing this, it's a footgun.
Exited processes generate event_t::process_exit if they exit with a
nonzero status. Prior to this change, to avoid sending duplicate events,
we would clear the status. This is ugly since we're lying about the
process exit status. Use a real flag to prevent sending duplicate
notifications.
This adds a variable, $fish_autosuggestion_enabled.
When set to 0, it will turn off autosuggestions/highlighting.
Setting it to anything else will enable it (which also
means this remains enabled by default).
Commit ec3d3a481 (Support "$(cmd)" command substitution without line
splitting, 2021-07-02) started treating an input string like
"a$()b" as if it were "a"$()"b". Yet, we do not actually insert the
virtual quotes. Instead we just adapted the definition of when quotes
are closed - hence the changes to quote_end().
parse_util_locate_cmdsubst_range() is aware
of the changes to quote_end() but some of its
callers like parse_util_detect_errors_in_argument() and
highlighter_t::color_as_argument() are not. They split strings at
command substitution boundaries without handling the special quoting
rules. (Only the expansion logic did it right.)
Fix this by handling the special quoting rules inside
parse_util_locate_cmdsubst_range(). This is a bit hacky since it
makes it harder for callers to process some substrings in between
command substitutions, but that's okay because current callers only
care about what's inside the command substitutions.
Fixes#8394
For some reason on a current glibc 2.33, the configure check fails.
The man page says we'd have to define XOPEN_SOURCE>=700, but I don't
want to do that since it changes a bunch of other things, and it
didn't work in my tests.
So we just force it, since we know it works (since glibc 2.3).
This is a performance difference of ~20% for printf, so it's a
reasonably big deal.
Since #4376, for-loops would set the loop variable outside, so it
stays valid.
They did this by doing the equivalent of
```fish
set -l foo $foo
for foo in 1 2 3
```
And that first imaginary `set -l` would also fire a set-event.
Since there's no use for it and the variable isn't actually set, we
remove it.
Fixes#8384.
This was meant to trigger the wcstring_list_t overload by constructing one with `{norm_dir}`. Older gcc can't figure out what to do.
So instead we use the wcstring overload for now.
This used to construct a vector, which was then passed down and filled
with a new event_t each go around the loop. That's useless - we fire
one event here, and it's simply the variable event.
This reduces the overhead of a for-loop by ~10%:
```fish
for i in (seq 100000)
true
end
```
runs in about 90% of the time now.
This reverts commit 61cd05efb0.
It is true that we detect break and continue errors statically, but they can
still be invoked dynamically, example:
set sneaky break
$sneaky # dynamically breaks from the loop
or just `eval break`.
A followup commit will add tests for this.
function_info_t was the "mutable bits" of a function, like its
description. But we have eliminated all of those, so we can eliminate
the class.
No functional change here.
This was already printed by builtin_missing_argument/unknown_option.
Since we need more control (because we add our own errors in other
places), teach builtin_unknown_option to suppress the trailer, like
missing_argument already could.
And then use it.
Fixes#8368.
Now looks like
```
Error: Wrong color in test at index 8-11 in text (expected 0x6, actual 0x2):
command echo abc foo &
^^^^
```
instead of repeating the error for every character that is wrong.
This introduces a new variable, $fish_color_option, that can be used
to highlight options differently.
Options are tokens starting with `-`, but only up to (and including!)
the first `--`.
Fixes#8292.
__GLIBC_PREREQ is the preferred way to conditionally enable features
based on glibc versions. Use it to avoid expensive parsing and
locale sensitivity. See #8204
We want to enable posix_spawn only for glibc >= 2.24, so we check
gnu_get_libc_version() at runtime. This returns a string with the
version number.
Because it's a version number it's spelt with a "." and never a ",",
but we interpret it as a float. This is iffy to begin with, but simple
enough. Only when the locale uses a ",", things break - it'll read it
as "2" and fail the check, which absolutely *tanks* performance on WSL1.
I'm unsure if this gives the proper runtime glibc version - it might,
whereas __GLIBC_MINOR__ and such definitely would not.
So fix the immediate problem by at least using a c locale - this is
already masked by 8dc3982408, but better
safe than sorry.
In most cases, like math, we want C-semantics for floating point
numbers. In particular "." needs to be the decimal separator.
Instead, we pay the price in printf, which is currently the sole place
to output in locale-specific numbers and attempt to read them and
C-style ones.
Similar to `test`, `_` is so likely to at least slow down if not
break all things catastrophically that it ought not be allowed as a
function name. Fixes#8342
This just compares two longs as strings on the go.
We can simply
1. ignore leading zeroes - they have no influence on the value
2. compare the digits char-by-char
3. keep the comparison for the first differing digit
4. if one number is longer than the other, that is larger
5. if the numbers have the same length, the one larger in the first
differing digit is larger
This makes this comparison quite a bit faster, which makes globs in
directories with numbered files up to 20% faster.
Note that, for historical reasons, this still ignores whitespace right
after the numbers!
1ab81ab90d removed one usage of iswdigit()
but there are others; more importantly, the knowledge that iswdigit() is
slow isn't preserved anywhere apart from the git history, so there's
nothing to prevent its use from creeping back into the codebase.
Another alternative is to blacklist iswdigit() (shadow it with a
function of the same name that throws a static_assert) but if we're
going to shadow it anyway, might as well make it useful.
- Only check for HAVE_CLOCK_GETTIME and HAVE_FUTIMENS on Linux, since
they are only used to implement a Linux-specific workaround related
to mtime precision.
- Make sure that hack is limited to Linux builds
- HAVE_SYS_SYSCTL_H was unused, but we should have been using it
- HAVE_TERMIOS_H was unused, remove it
The only functional change is that unix machines with clock_gettime
and futimens will not bother with a Linux-specific hack, and won't
waste time checking for either during cmake configuration either.
For some godforsaken reason it's slow on glibc
Like, actually, this manages to somehow make "echo **" 10% faster now?
The spec says this matches 0 through 9 always, so this is safe. We
also use this logic in a variety of other places already.
This allows us to skip re-wcs2stringing the base_dir again and again
by simply using the fd. It's about 10% faster in my testing.
fstatat is defined by POSIX, so it should be available everywhere.
Also for the glob version, because this is just a performance thing.
Makes `echo **` 20% faster - 100ms to 80ms for the fish repo.
This also applies to the future `path` builtin.
Still not a speed demon, but this is a very very easy win.
Now we probably gotta do globbing all in string instead of wcs2stringing ourselves to death.
Like the $status commit, this would add the offset to already existing
errors, so
```fish
(foo)
(bar)
something
```
would see the "(foo)" error, store the correct error location, then
see the "(bar)" error, and *add the offset of (bar)* to the "(foo)"
error location.
Solve this by making a new error list and appending it to the existing
ones.
There's a few other ways to solve this, including:
- Stopping after the first error (we only display the first anyway, I
think?)
- Making it so the source location has an "absolute" flag that shows
the offset has already been added (but do we ever need to add two offsets?)
I went with the simpler fix.
This would break the location of any prior errors without doing
anything of value.
E.g.
```fish
echo foo | exec grep # this exec is not allowed!
$status
somethingelse # The error might be found here!
```
Would apply the offset of `$status` to the offset of `exec`, locating
the error for `exec` somewhere after $status!
Allows the compiler to know our bespoke assert functions
are cold paths. This would normally occur somehow for real assert().
Assembly does appear it will save some branches.
Also don't worry about NDEBUG
(This doesn't matter because we rolled our own assert functions.
Thanks @zanchey.)
Just guess anew when it's not set.
(this still uses the value of $fish_emoji_width, but clamped to 1 or 2
- we could also guess if it's an unusable value, but that's a
different issue and tbh this variable is becoming less and less useful
as time moves on and things move to the new widths by default)
Fixes#8274.
This makes it so we treat backspaces as width -1, but never go below a
0 total width when talking about *lines*, like in screen or string
length --visible.
Fixes#8277.
OpenBSD has a posix_spawn implementation which fails to return ENOEXEC
on a shebangless script, causing us to fail the shebangless tests.
Disable posix_spawn on OpenBSD.
OpenBSD's mmap is famously unsychronized with file IO. In theory fsync
and msync can be used to synchronize but I was unable to get it to work.
Just don't use mmap for history on OpenBSD. This fixes the history merge
tests.
When getting the hostname to construct the legacy uvar path, if the
hostname is empty, we will create a path pointing at a directory. On
BSDs this path can be successfully open'd and we will produce errors
about invalid uvar files.
The "linear" wildcard_match actually contained a bug that compared two
strings on every iteration, causing this to be much slower than
necessary. Fix this.
To broadcast a uvar change on Linux, we write to a named pipe, wait a bit,
and then read it back. While the pipe is readable, fish will enter a "polling
mode" where it will check for uvar changes every N msec, until the pipe is no
longer readable. If the pipe stays readable for too long (5 seconds), fish
will try to drain it; this may happen if broadcasting instance of fish is
killed before it can read back its data.
In #8209 we have a case where fish is launched in the background to set a
uvar, and then immediately exits, leaving data on the pipe. This means that
we are perpetually in a polling mode until we hit that timeout. Reduce the
timeout to 1 second and the polling interval to 10 msec.
This improves #8209; it doesn't fix it fully but I think it's the best we can
do absent some other IPC mechanism.
Now that we removed EROTTEN which had the same error code as EPERM,
we can give a less confusing error in case a user has not allowed
their terminal access to a directory.
See #8264
When cd is passed a broken symlink, this changes the error message from
"no such directory" to "broken symbolic link". This scenario probably
won't happen very often since completion won't suggest broken symlinks
but it can't hurt to give a good error.
Fish used to do this until 7ac5932. This logic used to be in
path_get_cdpath, however, that is only used for highlighting, so we
don't need error messages there. Changing cd is enough.
Reword from "rotten" to "broken" since that's what file(1) uses.
Clean-up leftovers from old "rotten" code (nomen est omen).
See #8264
This currently changes builtin realpath with the "-s" option:
builtin realpath -s ///tmp
previously would print "///tmp", now it prints "/tmp".
The only thing "allow_leading_double_slashes" does is allow *two*
slashes.
This is important for `path match`, to be introduced in #8265.
Tmux has support for wrapping arbitrary escape sequences inside
```
\ePtmux;\e%s\e\\
```
Since this ends like the screen title escape, we just reuse that.
Characteristically, this is basically undocumented, but we already use
it in e.g. fish_vi_cursor.
The default matching logic for fish_tests was prefix based, so when we
were running `history` we were also running all history tests. This
causes the test to fail for an unknown reason.
Even though we are using CMake's ctest for testing, we still define our
own `make test` target rather than use its default for many reasons:
* CMake doesn't run tests in-proc or even add each tests as an
individual node in the ninja dependency tree, instead it just bundles
all tests into a target called `test` that always just shells out to
`ctest`, so there are no build-related benefits to not doing that
ourselves.
* CMake devs insist that it is appropriate for `make test` to never
depend on `make all`, i.e. running `make test` does not require any
of the binaries to be built before testing.
* The only way to have a test depend on a binary is to add a fake test
with a name like "build_fish" that executes CMake recursively to
build the `fish` target.
* It is not possible to set top-level CTest options/settings such as
CTEST_PARALLEL_LEVEL from within the CMake configuration file.
* Circling back to the point about individual tests not being actual
Makefile targets, CMake does not offer any way to execute a named
test via the `make`/`ninja`/whatever interface; the only way to
manually invoke test `foo` is to to manually run `ctest` and specify
a regex matching `foo` as an argument, e.g. `ctest -R ^foo$`... which
is really crazy.
With this patch, it is now possible to execute any single test by name,
by invoking the build directly, e.g. to run the `universal.fish` check:
`cmake --build build --target universal.fish` or
`ninja -C build universal.fish`. Unfortunately, this is not integrated
into the Makefile wrapper, so `make universal.fish` won't work (although
this can potentially be hacked around).
Instead of compiling `fish_tests.cpp` dynamically with weakly-linked
symbols and asking it to print the list of all available tests, we
use a magic string `#define`'d as a no-op to allow CMake to regex search
for matching test groups. This speeds up configuration somewhat (by not
compiling anything), but more importantly, it's much less brittle and
doesn't involve and linker dark magic.
There's of course still no getting around the fact that it's really ugly.
We have a *lot* of color sequences to try and tparm is slow (on the
whole, when you do this thousands of times).
So let's just check colors last, which makes everything else (which is
comparatively nothing) faster, while barely impacting
colors (benchmarking confirms no measurable difference).
Fixes#8253.
Fixes#8232.
Note that this needed to have expect_prompt used in the pexpect test -
we might want to add a "catchup" there so you can just ignore the
prompt counter for a bit and pick it back up later.
* Remove safe_strerror, safe_perror and safe_append
This no longer works on new glibcs because they removed sys_errlist.
So just hardcode the relevant errno messages (and phrase them better).
Fixes#4183.
Co-authored-by: Johannes Altmanninger <aclopte@gmail.com>
The clang warning for pending_signals_t was about the operator=
return type being wrong (misc-unconventional-assign-operator).
Signed-off-by: Rosen Penev <rosenp@gmail.com>
We don't want to convert the input to a "wcstring &" because
"stage_variables" needs to have the same type as other stages, so we
can use it in a loop. Communicate that to clang-tidy.
We also don't want to take "wcstring &&". As the Google style guide
states, it's not really beneficial here, and it potentially hurts
readability because it's a relatively obscure feature.
The rest of our code contains a bunch of && parameters. We might
want to get rid of some of them.
Closes#8227
clang-tidy wrongly sees an std::move to a const ref parameter and
believes it to be pointless. The copy constructor however is deleted.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
This disables job control inside command substitutions. Prior to this
change, a cmdsub might get its own process group. This caused it to fail
to cancel loops properly. For example:
while true ; echo (sleep 5) ; end
could not be control-C cancelled, because the signal would go to sleep,
and so the loop would continue on. The simplest way to fix this is to
match other shells and not use job control in cmdsubs.
Related is #1362
The previous layout confused me for a minute as it suggested it was
possible for `pipe_next_read` to be moved twice (once in the first
conditional block, then again when the deferred process conditional
called `continue` - if and only if the deferred process *was* the last
process in the job. This patch clarifies that can't be the case.
`pipe_next_read` is moved in the body of the loop, and not
re-initialized the last go around. However, we call
`pipe_next_read.close()` after the loop, which is undefined behavior (as
it's been moved).
Best case scenario, the compiler passed the address of our copy of the
struct to `exec_process_in_job` and beyond, it went out of scope there,
the value of `fd` was set to closed (minus one), and we explicitly call
`.close()` again, in which case it does nothing.
Worst case scenario, the compiler re-uses the storage for the now-moved
struct for something else and our call to `.close()` ends up closing
some other value of `fd` (valid or invalid) and things break.
Aside from the fact that we obviously don't need to close it since it's
not assigned for the last process in the job, it's a RAII object so we
don't have to worry about manually closing it in the first place.
`escape_code_length()` was converted from returning a `size_t` to
returning a `maybe_t<size_t>` but that subtly broke all existing call
sites by forcing all input to go through the slow path of assuming a
zero-length escape sequence was found.
This is because all callers predicated their next action on what amounts
to `if (escape_code_length(...))` which would correctly skip the slow
path when `escape_code_length` returned zero, but after the conversion
to `maybe_t` contained not `maybe_t::none()` but rather
`maybe_t::some(0)` due to coercion of the result from the `size_t` local
`esc_seq_len` to the `maybe_t<size_t>` return value - which, when
coerced to a boolean returns *true* for `maybe_t::some(0)` rather than
false.
The regression was introduced in 7ad855a844
and did not ship in any released versions so no harm, no foul.
This is required for the usage of placement new. Not an issue for fish
as it gets picked up from elsewhere, but it lets one use it in a C++
test directly this way.
* commandline: Add --is-valid option to query whether it's syntactically complete
This means querying when the commandline is in a state that it could
be executed. Because our `execute` bind function also inserts a
newline if it isn't.
One case that's not handled right now: `execute` also expands
abbreviations, those can technically make the commandline invalid
again.
Unfortunately we have no real way to *check* without doing the
replacement.
Also since abbreviations are only available in command position when
you _execute_ them the commandline will most likely be valid.
This is enough to make transient prompts work:
```fish
function reset-transient --on-event fish_postexec
set -g TRANSIENT 0
end
function maybe_execute
if commandline --is-valid
set -g TRANSIENT 1
commandline -f repaint
else
set -g TRANSIENT 0
end
commandline -f execute
end
bind \r maybe_execute
```
and then in `fish_prompt` react to $TRANSIENT being set to 1.
Because we are, ultimately, interested in how many cells a string
occupies, we *have* to handle carriage return (`\r`) and line
feed (`\n`).
A carriage return sets the current tally to 0, and only the longest
tally is kept. The idea here is that the last position is the same as
the last position of the longest string. So:
abcdef\r123
ends up looking like
123def
which is the same width as abcdef, 6.
A line feed meanwhile means we flush the current tally and start a new
one. Every line is printed separately, even if it's given as one.
That's because, well, counting the width over multiple lines
doesn't *help*.
As a sidenote: This is necessarily imperfect, because, while we may
know the width of the terminal ($COLUMNS), we don't know the current
cursor position. So we can only give the width, and the user can then
figure something out on their own.
But for the common case of figuring out how wide the prompt is, this
should do.
Without escapes.
The new option is a bit cheesy, but "width" isn't as expressive and
requires an argument.
Maybe we want "pad" to also require --visible?
* Add `set --function`
This makes the function's scope available, even inside of blocks. Outside of blocks it's the toplevel local scope.
This removes the need to declare variables locally before use, and will probably end up being the main way variables get set.
E.g.:
```fish
set -l thing
if condition
set thing one
else
set thing two
end
```
could be written as
```fish
if condition
set -f thing one
else
set -f thing two
end
```
Note: Many scripts shipped with fish use workarounds like `and`/`or`
instead of `if`, so it isn't easy to find good examples.
Also, if there isn't an else-branch in that above, just with
```fish
if condition
set -f thing one
end
```
that means something different from setting it before! Now, if
`condition` isn't true, it would use a global (or universal) variable of
te same name!
Some more interesting parts:
Because it *is* a local scope, setting a variable `-f` and
`-l` in the toplevel of a function ends up the same:
```fish
function foo2
set -l foo bar
set -f foo baz # modifies the *same* variable!
end
```
but setting it locally inside a block creates a new local variable
that shadows the function-scoped variable:
```fish
function foo3
set -f foo bar
begin
set -l foo banana
# $foo is banana
end
# $foo is bar again
end
```
This is how local variables already work. "Local" is actually "block-scoped".
Also `set --show` will only show the closest local scope, so it won't
show a shadowed function-level variable. Again, this is how local
variables already work, and could be done as a separate change.
As a fun tidbit, functions with --no-scope-shadowing can now use this to set variables in the calling function. That's probably okay given that it's already an escape hatch (but to be clear: if it turns out to problematic I reserve the right to remove it).
Fixes#565
Fixes some regressions from 35ca42413 ("Simplify some parse_util functions").
The tmux tests are not beautiful but I find them easy to write.
Probably a pexpect test would also be enough here?
The names in the implementation differed from those in the header, but
the header names were definitely better (because they correlated across
function calls).
This doesn't work.
The real thing that tells if something is read-only is
electric_var_t::readonly().
This wasn't used, and we provide no way to make a variable read-only,
which makes this an unnecessary footgun.
for PWD in foo; true; end
prints:
>..src/parse_execution.cpp:461: end_execution_reason_t parse_execution_context_t::run_for_statement(const ast::for_header_t&, const ast::job_list_t&): Assertion `retval == ENV_OK' failed.
because this used the wrong way to see if something is read-only.
env_var_t::read_only() is basically broken.
It doesn't work for $PWD, as best as I can tell no variable is
read-only except for a hardcoded list of some of the electric ones.
So we should probably remove the entire read_only and
setting_read_only mechanism.
This breaks in comma-using locales (like my own de_DE.UTF-8), because
it still uses the locale-dependent strtod, which will then refuse to
read
1234.567
Using strtod_l (not in POSIX, I think?) might help, but might also be
a lot slower. Let's revert this for now and figure out if that is
workable.
This reverts commit fba86fb821.
fish_wcstod had a "fast path" which looked for all digits, otherwise
falling back to wcstod_l. However we now pass the C locale to wcstod_l,
so it is safe to extend the fast path to all ASCII characters.
In practice math parsing would pass strings here like "123 + 456" and
the space and + were knocking us off the fast path. benchmarks/math.fish
goes from 2.3 to 1.4 seconds with this change.
is_block is a field which supports 'status is-block', and also controls
whether notifications get posted. However there is no reason to store
this as a distinct field since it is trivially computed from the block
list. Stop storing it. No functional changes in this commit.
Through a mechanism I don't entirely understand, $PWD is sometimes
writable (so that `cd` can change it) and sometimes not.
In this case we ended up with it writable, which is wrong.
See #8179.
This didn't do all the syntax checks, so something like
fish -c 'echo foo; and $status'
complained of a missing command `0` (i.e. $status), and
fish -c 'echo foo | exec grep'
hit an assert!
So we do what read_ni does, parse each command into an ast, run
parse_util_detect_errors on it if it worked and then eval the ast.
It is possible to do this neater by modifying parser::eval, but I
can't find where.
This is slightly unclean. Even tho it would otherwise be syntactically
valid, using $status as a command is very very very likely to be an
error, like
if not $status
We have reports of this surprisingly regularly, including #2773.
Because $status can only ever be a value from 0 to 255, it is also
very unlikely to be an actual command, and that command is very
unlikely to do what you want.
So we simply point the user towards the "conditions" help section,
that should explain things.
This means, if we repaint with a shorter prompt, we won't overwrite the longer parts.
This reintroduces #8002, but that's a much rarer usecase - having a prompt that fills the entire screen,
in certain terminals.
This reverts commit d3ceba107e.
Fixes#8163.
This is opt-in through a new feature flag "ampersand-nobg-in-token".
When this flag and "qmark-noglob" are enabled, this command no longer
needs quoting:
curl https://example.com/thing?foo=bar&duran=duran
Compared to the previous approach e1570a4 ("Let '&' only separate as
the first char of a word"), this has some advantages:
1. "&&" and "&>" are no longer affected. They are still special, even
if used between tokens without spaces, like "echo bar&>foo".
Maybe this is not really *better*, but it avoids risking to annoy
users by breaking the old variant.
2. "&" is still special if at the end of a token, like in "sleep 1&".
Word movement is not affected by the semantics change, so Alt-F and
friends still stop at every "&".
Currently, if a "return" is given outside of a function, we'd just
throw an error.
That always struck me as a bit weird, given that scripts can also
return a value.
So simply let "return" outside also exit the script, kinda like "exit"
does.
However, unlike "exit" it doesn't quit an interactive shell - it seems
weird to have "return" do that as well. It sets $status, so it can be
used to quickly set that, in case you want to test something.
Today the reader exposes its internals directly, e.g. to the commandline
builtin. This is of course not thread safe. For example in concurrent
execution, running `commandline` twice in separate threads would cause a
race and likely a crash.
Fix this by factoring all the commandline state into a new type
'commandline_state_t'. Make it a singleton (there is only one command
line
after all) and protect it with a lock.
No user visible change here.
No functional change here; this migrates the fix ensuring that history
items are available in the builtin interactive read command into the
reader itself, in preparation for removing reader_get_history().
This adds a hack to the parser. Given a command
echo "x$()y z"
we virtually insert double quotes before and after the command
substitution, so the command internally looks like
echo "x"$()"y z"
This hack allows to reuse the existing logic for handling (recursive)
command substitutions.
This makes the quoting syntax more complex; external highlighters
should consider adding this if possible.
The upside (more Bash compatibility) seems worth it.
Closes#159
When the user presses control-C, fish marks a cancellation signal which
prevents fish script from running, allowing it to properly unwind.
Prior to this commit, the signal was cleared in the reader. However this
missed the case where a binding would set $fish_bind_mode which would
trigger event handlers: the event handlers would be skipped because of
the cancellation flag was still set. This is similar to #6937.
Let's clear the flag earlier, as soon as we it's set, in inputter_t.
Fixes#8125.
* string: Allow `collect --no-empty` to avoid empty ellision
Currently we still have that issue where
test -n (thing | string collect)
can return true if `thing` doesn't print anything, because the
collected argument will still be removed.
So, what we do is allow `--no-empty` to be used, in which case we
print one empty argument.
This means
test -n (thing | string collect -n)
can now be safely used.
"no-empty" isn't the best name for this flag, but string's design
really incentivizes reusing names, and it's not *terrible*.
* Switch to `--allow-empty`
`--no-empty` does the exact opposite for `string split` and split0.
Since `-a`/`--allow-empty` already exists, use it.
This reverts commit b56b230076.
which somehow made us miss repaints on uvar notifications.
The commit was a workaround for a polling bug which was later properly
fixed by 7c5b8b855 ("Use the uvar notifier pipe timestamp to avoid
excessive polling"), so it's no longer necessary.
Add a system test. If I had a better understanding of the bug I could
probably write a better test.
Fixes#8088
We used to warn about PATH and CDPATH that are not valid directories,
but only if they contain colons.
However, the warning was a false positive because we would split
those values by colons anyway. So there is nothing left we want to
warn about.
Fixes#8095
FISH_USE_POSIX_SPAWN is always defined, thanks to the line
#define FISH_USE_POSIX_SPAWN HAVE_SPAWN_H
So replace #ifdef with #if to fix compilation on platforms lacking
spawn.h. Also make the spawn.h inclusion condition consistent across
files.
The sort routine was using the address of the **function pointer**
`signal(int signal)` rather than the union payload of the same name.
Perhaps one of the two should be renamed.
Prior to this change, if you were to type `./fish_indent` it woul dbe
colored as valid, because the path
`$fish_functions_path/./fish_indent.fish` is a real file. However of
course this is not actually executed as a function. Teach
function_exists to return false for function names which are invalid.
This only accepted "--background=". Really what we need to do is do an
actual getopt, but that wants a null-terminated array and is tightly
coupled to set_color.
Fixes#8053.
* Try to set LC_CTYPE to something UTF-8 capable
When fish is started with LC_CTYPE=C (even just effectively, often via
LC_ALL=C!), it's basically broken. There's no way to handle non-ASCII
characters with a C locale unless we want to write our
locale-independent replacements for all of the system functions.
Since we're not going to do that, let's try to find *some locale* for
LC_CTYPE.
We already do that in __fish_setlocale, but that's
- a bit of a weird thing that reads unstandardized system
configuration files
- allows setting locale to C explicitly
So it's still easily possible to end up in a broken configuration.
Now, the issue with this is that there is (AFAICT) no portable way to
get a list of all allowed locales and C.UTF-8 is not standardized, so
we have no one locale to fall back on and are forced to try a few. The
list we have here is quite arbitrary, but it's a start.
Python does something similar and only tries C.UTF-8, C.utf8 and
"UTF-8".
Once C.UTF-8 is (hopefully) standardized, that will just start
working (tm).
Note that we do not *export* the fixed LC_CTYPE variable, so external
programs still have to deal with the C locale, but we have no real
business messing with the user's environment.
To turn it off: $fish_allow_singlebyte_locale, if set to something true (like "1"),
will re-run the locale initialization and skip the bit where we force
LC_CTYPE to be utf8-capable.
This is mainly used in our tests, but might also be useful if people
are trying to do something weird.
This concerns the behavior of posix_spawn for shebangless scripts. At some
point, glibc started executing them using `sh`, which is desirable for
fish's shebangless support (see #7802). On glibcs without that behavior
the shebangless test fails. So this change disables posix_spawn on older
glibcs.
It's not easy to figure out when that happened but it definitely happens
in glibc 2.28, and does not happen in glibc 2.17. Presumably the new
behavior is present in glibc 2.24 (see BZ#23264) so that's the cutoff:
posix_spawn is no longer allowed on glibc < 2.24.
This fixes the noshebang test failures on Ubuntu Xenial and Centos 7.
See discussion at bottom of #8021.
Now that `$last_pid` is never fish's pid, we no longer need to force
jobs to run in their own pgroup. Restore the job control behavior to
what it was prior, so that signals may be delivered properly in
non-interactive mode.
This reverts commit 3255999794
Prior to this change, a function with an on-job-exit event handler must be
added with the pgid of the job. But sometimes the pgid of the job is fish
itself (if job control is disabled) and the previous commit made last_pid
an actual pid from the job, instead of its pgroup.
Switch on-job-exit to accept any pid from the job (except fish itself).
This allows it to be used directly with $last_pid, except that it now
works if job control is off. This is implemented by "resolving" the pid to
the internal job id at the point the event handler is added.
Also switch to passing the last pid of the job, rather than its pgroup.
This aligns better with $last_pid.
When a job is placed in the background, fish will set the `$last_pid`
variable. Prior to this change, `$last_pid` was set to the process group
leader of the job. However this caussed problems when the job ran in
fish's process group, because then fish itself would be the process group
leader and commands like `wait` would not work.
Switch `$last_pid` to be the actual last pid of the pipeline. This brings
it in line with the `$!` variable from zsh and bash.
This is technically a breaking change, but it is unlikely to cause
problems, because `$last_pid` was already rather broken.
Fixes#5036Fixes#5832Fixes#7721
