Prior to this fix, an escaped character like \x41 (hex for ascii A)
was interpreted the same was as A, so that $\x41 would be the same
as $A. Fix this by inserting an INTERNAL_SEPARATOR before these escapes,
so that we no longer treat it as part of the variable name.
This also affects brackets; don't treat echo $foo\1331\135 the same as
echo $foo[1].
Fixes#7969
In the named pipe notifier, notifications are broadcast by writing to the
pipe, waiting briefly, and then reading it back. When clients see the pipe
as readable, they report the uvars as potentially changed and fish will
sync against the uvar file.
Prior to this change, we synced repeatedly when the pipe was readable. But
we can do somewhat better by also checking the named pipe's timestamp (via
fstat). If the pipe has not changed, then we can skip the sync even if
there is currently data lingering on it.
With this change we should sync against the variable file less often
(typically once or twice per write); in the next change we refactor this
logic so it's easier to follow.
This removes the "did_visit" message because it doesn't really add
anything.
For example:
```
ast-construction: make job_list 0x55a6d19729f0
ast-construction: make job_conjunction 0x55a6d1971c00
ast-construction: will_visit job_conjunction 0x55a6d1971c00
ast-construction: will_visit job 0x55a6d1971c18
ast-construction: variable_assignment_list size: 0
ast-construction: will_visit statement 0x55a6d1971c48
ast-construction: make decorated_statement 0x55a6d1972650
ast-construction: will_visit decorated_statement 0x55a6d1972650
ast-construction: make argument_or_redirection 0x55a6d1968310
ast-construction: will_visit argument_or_redirection 0x55a6d1968310
ast-construction: make argument 0x55a6d197b0b0
ast-construction: did_visit argument_or_redirection 0x55a6d1968310
ast-construction: argument_or_redirection_list size: 1
ast-construction: did_visit decorated_statement 0x55a6d1972650
ast-construction: did_visit statement 0x55a6d1971c48
ast-construction: job_continuation_list size: 0
ast-construction: did_visit job 0x55a6d1971c18
ast-construction: job_conjunction_continuation_list size: 0
ast-construction: did_visit job_conjunction 0x55a6d1971c00
ast-construction: job_list size: 1
```
those "did_visit" messages all correspond to "will_visit" ones. They
are effectively block delimiters like `end` or `}`.
If we remove them it turns into:
```
ast-construction: make job_list 0x55a6d19729f0
ast-construction: make job_conjunction 0x55a6d1971c00
ast-construction: will_visit job_conjunction 0x55a6d1971c00
ast-construction: will_visit job 0x55a6d1971c18
ast-construction: variable_assignment_list size: 0
ast-construction: will_visit statement 0x55a6d1971c48
ast-construction: make decorated_statement 0x55a6d1972650
ast-construction: will_visit decorated_statement 0x55a6d1972650
ast-construction: make argument_or_redirection 0x55a6d1968310
ast-construction: will_visit argument_or_redirection 0x55a6d1968310
ast-construction: make argument 0x55a6d197b0b0
ast-construction: argument_or_redirection_list size: 1
ast-construction: job_continuation_list size: 0
ast-construction: job_conjunction_continuation_list size: 0
ast-construction: job_list size: 1
```
Which is still unambiguous because of the indentation.
(this is still *super verbose* and we might want to remove it from the
`*` "all" debug category and only allow turning it on explicitly)
This simply checks if the parser requested exit after running any
binding scripts (in read_normal_chars).
I think this means we no longer need the `exit` bind function.
Fixes#7967.
Reproducible at least on Linux, where the "named pipe" universal
variable notifier is used:
rm -rf build/test/xdg_config
XDG_CONFIG_HOME=build/test/xdg_config ./build/fish -c "xterm -e ./build/fish"
The child fish reacts to keyboard input with a noticeable initial
delay. This is because the universal variable file is polled over
a million times, even when I immediately press Control-D. This polling
prevents readb() from handling keyboard input.
Before commit 939aba02d ("Refactor input_common.cpp:readb"), readb()
reacted to keyboard input even when there were universal variable
notifications. Restore this behavior, but make sure to call the
universal variable notifier after the new "prepare_to_select" logic.
Maybe the problem is in the notifier but the old behavior was sane.
Fixes the problems described in
7a556ec6f2 (commitcomment-49773677)
Adding "-d uvars-file" to the reproducesr shows that we are checking
the uvar file repeatedly:
uvar-file: universal log sync
uvar-file: universal log sync elided based on fast stat()
uvar-file: universal log no modifications
This only uses the functions fish ships with, but still doesn't allow
any *customization*, which is the point of no-config.
This makes it a lot more usable, given that the actual normal prompt
and things are there.
This still doesn't set any colors, because we don't run
__fish_config_interactive because we don't read config.fish (any
config.fish), because that would run the snippets.
In many cases we currently discard escaped newlines, since they
are often unnecessary (when used around &|;). Escaped newlines
are useful for structuring argument lists. Allow them for variable
assignments since they are similar.
Closes#7955
This would print the default "Argument is invalid" error string, which
is *true* but not super obvious, because `test` doesn't always perform
numeric conversion, and that's the bit that failed here.
This refactors the behavior of string match with capture groups to
correctly handle multiple arguments. Now the variable capture applies to
the first match, as documented. Fixes#7938.
string match is documented as setting an unset variable if a capture group
is unmatched in an otherwise matched regex, and if the `--all` flag is not
provided. However prior to this fix, it instead set a variable containing
the empty string as a single value. Correct the implementation to match
the documentation.
Note that if the `--all` flag is provided we continue to set empty
strings, which is documented.
This came out of an investigation into making strings immutable.
This code did "lazy" lowercasing but we can simplify it by just
providing our own case-insensitive compare routine, which is good
enough for colors.
job_reap is now called more often. This optimizes it by doing an
early-out if there are no running jobs (common at the prompt) and also
skipping the save/restore status, since by inspection we also save and
restore the status when running event handlers.
This concerns printing status messages for background jobs which have
stopped or finished. Previously fish would do this from two places:
1. Before running a command (including empty string)
2. If a signal is received during select()
So if the job finishes while fish is doing something else (like running an
event handler) then we would not print status messages until the user hit
return. This caused the job_summary.py test to be flaky.
Fix this by splitting the interrupt handler into two parts: a part that
handles signals (e.g. triggering exit from the reader), and a part that
always runs just before blocking in select(). This second part always
reaps jobs and prints their status messages. This narrows the window for a
job exit to be "missed" before fish blocks in select, and should make the
job_summary.py test more reliable.
This concerns the problem of "injecting" fancy fish bits like job reaping
into the "common" input stuff which is also used by fish_key_reader.
Instead of providing a callback, make the input event queue a base class
with virtual functions. This allows for a richer interface and simplifies
some memory management issues.
readb is used to read a single byte from stdin, or maybe update universal
variables, or maybe invoke completion handlers, etc. Previously it
returned char_event_t but this is more complex than necessary; instead we
can just have it return a single byte, or one of a few special error
codes. This makes the readb's role more clear.
"The" interrupt handler is used when we get a signal while waiting at the
prompt. Switch it from a global function pointer to an std::function. This
is a mild refactoring which itself will be replaced soon.
Now that timeouts are stored in the event queue peeker, we can remove the
notion of timeout events altogether. Instead you may ask for an event with
a timeout, and get back none on timeout. This simplifies how input events
work.
Previously, when attempting to match a key binding, we would dequeue
events from the queue and put them back on if the binding fails. The
tricky part is timeouts: distinguishing between an escaped character and
the escape key itself. This was handled with "timeout events" and we had
to be careful to know when to discard them.
Switch to a new model: use event_queue_peeker more pervasively.
Temporarily dequeued events are stored in the peeker, and the peeker
itself remembers when it has seen a timeout. This is in preparation for
removing the idea of "timeout events" altogether.
Make it an ordinary struct wrapping a vector, instead of a template.
This is in preparation for using it more widely, for matching bindings
as well as mouse CSI sequences.
Also add some mouse-disabling tests.
select_wrapper_t wraps up the annoying bits of using select(): keeping
track of the max fd, passing null for boring parameters, and
constructing the timeout. Introduce a wrapper struct for this and
replace the existing uses of select() with the wrapper.
In readch_timed, we were passing 1 as the number of fds. This is correct if
the fd is 0 (stdin) which it typically is; however this will fail if in_ is
not stdin. Switch to in_ + 1.
This could have been one iteration off, e.g.
```fish
function on-winch --on-signal winch
echo $LINES
end
```
Resize the terminal, it'll print e.g.
24
then run `echo $LINES` interactively, it might have a different answer.
This isn't beautiful, but it works. A better solution might be to make
the termsize vars electric and just always update them on read?
With something like
```
history | head -n 1
```
this would error "write: Broken pipe", which is just annoying. There
is no *problem* here, `head` closes this on purpose.
Fixes#7924.
Things like
```fish
complete command -n '__fish_seen_subcommand_from subcommand'
--force-files
```
would not be obeyed because we only checked force-files when there was
an option.
Fixes#7920.
