It's now good enough to do so.
We don't allow grid-alignment:
```fish
complete -c foo -s b -l barnanana -a '(something)'
complete -c foo -s z -a '(something)'
```
becomes
```fish
complete -c foo -s b -l barnanana -a '(something)'
complete -c foo -s z -a '(something)'
```
It's just more trouble than it is worth.
The one part I'd change:
We align and/or'd parts of an if-condition with the in-block code:
```fish
if true
and false
dosomething
end
```
becomes
```fish
if true
and false
dosomething
end
```
but it's not used terribly much and if we ever fix it we can just
reindent.
We just do a cheesy version check and hope it works out.
If this is fixed in 10.15.4, we have to reenable it. If it still isn't
fixed in 10.16, we need to adjust it.
Fixes#6270
This is part of our (well, my) quest to spice up the default prompt.
In this case we color the host if $SSH_TTY is set, which is easy to
detect and helps draw attention to the host.
See #6398.
See #6375.
This variable holds an integer that resembles the fish version up to
that initializations were performed. It should be incremented whenever
some new initialization is required after upgrading fish. This should
not change the behavior for existing fish installations, except for a
minor message on installations that upgrade from fish<2.3.0.
[ci skip]
This use of eval is unsafe, not really all that useful and can spew
errors that can't be suppressed. So let's remove it, and in future add
a thing that can do expansions in a safe manner
Fixes#6456.
"-C" is short for "--case-sensitive", which is entirely okay with "--delete".
The one that isn't okay is "-X", which is short for "--Clear".
Seen on gitter.im
This prefixes files beginning with `-` with a `./` when generating
completions *in fish code*. Standard completions for directory listings
generated by the C++ directory traversal code are not afected by this
patch.
Most fish completions defer to `__fish_complete_suffix` to generate the
file/directory completions, these *will* be corrected.
* Make `type -p` and `type -P` behave as documented
* Recognize `-` as an additional sign of no path
Functions created via `source` (like by `alias`) cause `functions --details` to return `-`
rather than `stdin` when invoked upon them.
* Add the `--succinct` flag to `type`
* Use `echo` rather than `printf`
* Change `succinct` to `short`; print path if known
* Clean up the printing logic ever so slightly
This was mostly dead, since $fish_color_host is set to normal in
__fish_config_interactive. The assignment was only used if the user
explicitly unsets fish_color_host (which they shouldn't, really).
Anyway it's weird to use cyan, use normal instead.
[ci skip]
The colors are set in __fish_config_interactive before the prompt is
painted for the first time.
Also initialize the $fish_color_status for the (pipe) status, bump the
version for that.
[ci skip]
If a command fails, print the pipestatus in red instead of yellow and
don't print the status of the last process again. See #6375.
Also use $fish_color_status for coloring status consistently.
Also use __fish_pipestatus_with_signal to print SIGPIPE instead
of a numeric code on e.g.: yes | less +q
[ci skip]
(command pwd) uses the system's implementation of pwd. At least the GNU
coreutils implementation defaults to -P, which resulted in symlinks being
expanded when switching between directories with nextd/prevd.
This did some weird unescaping to try to extract the first word.
So we're now more likely to be *correct*, and the alias benchmark is
about 20% *faster*.
Call it a win-win.
Fix 'string length: Unknown option': add `--` before $subcommand
Fix count $subcommand always = 1 with `sudo` and `doas`:
give argv as array to __fish_complete_subcommand
[ci skip]
This mostly fixes some wrong indents or replaces some stray tab indents.
I excluded alignment on purpose, because we have a whole bunch of code
that goes like
```fish
complete -c foo -n 'some-condition' -l someoption
complete -c foo -n 'some-longer-condition' -l someotheroption
```
and changing it seems like a larger thing and would include more
thrashing.
See #3622.
This would have prevented #6323.
While we don't want to pepper `command` everywhere, `psub` is kind of
a core thing, so we should try to proof it against common problems.
This reverts commit f620ddf03b.
Setting the paste handler isn't performance-sensitive.
On the other hand setting it this way makes things less transparent,
less flexible (if e.g. a paste handler is installed while the shell is running),
and causes #6286.
Fixes#6286.
[ci skip]
Presently the completion engine ignores builtins that are part of the
fish syntax. This can be a problem when completing a string that was
based on the output of `commandline -p`. This changes completions to
treat these builtins like any other command.
This also disables generic (filename) completion inside comments and
after strings that do not tokenize.
Additionally, comments are stripped off the output of `commandline -p`.
Fixes#5415Fixes#2705
This just makes more sense, as people don't want to enter exact
matches if they delete interactively.
It also brings it in line with "search".
Fixes#6142
Rejects #6070
MacOS Catalina apparently ships a stripped down svn that doesn't have
`svnversion`, which we use to print the revision.
For now skip the entire step to remove error spam.
Fixes#6267.
[ci skip]
Every builtin or function shipped with fish supports flag -h or --help to
print a slightly condensed version of its manpage.
Some of those help messages are longer than a typical screen;
this commit pipes the help to a pager to make it easier to read.
As in other places in fish we assume that either $PAGER or "less" is a
valid pager and use that.
In three places (error messages for bg, break and continue) the help is
printed to stderr instead of stdout. To make sure the error message is
visible in the pager, we pass it to builtin_print_help, every call of which
needs to be updated.
Fixes#6227
* functions/__fish_print_hostnames: Fix ssh_configs no values return
`string replace` not working with mutlilines variable.
So split per line first.
* functions/__fish_print_hostnames: remove quotes at `split '\n'`
"\n with quotes" will cause `string split` weird issues.
* functions/__fish_print_hostnames: using `read -alz -d \n`
Fix `$contents` issues together
Corrects #6110
BSD `seq` produces a down-counting sequence when the second argument is
smaller than the first, e.g.:
$ seq 2 1
2
1
$
While GNU `seq` produces no output at all:
$ seq 2 1
$
To accommodate for this behavior, only run `seq` when we are sure that
the second argument is greater than or equal to the first (in this case,
the second argument `line_count` should be greater than 1).
Revert "gut gpg.fish/gpg1.fish/gpg2.fish; migrate functionality to __fish_complete_gpg.fish"
This reverts commit d558218d03.
Revert "break version-specific completions out into independent function;"
This reverts commit 9160e77b01.
Revert "split gpg2- and gpg1-specific completions to conditional block"
This reverts commit a069b95f63.
* Fix default Alt+W keybinding
The old keybinding would chop off the last line of the `whatis` output
when using a multi-line prompt. This fix corrects that.
* Make variable local and remove unneeded if statement
* Test that token is non-empty
Reproducer: type `: \<RET><M-p>`. This used to print an error due to builtin test receiving
too many arguments.
It looks like (commandline -j) can return multiple items, because a job can be broken up in multiple
lines terminated by backslashes.
With the new support for self-insert inserting a bound sequence,
the default binding for space as expanding abbreviations can be simplified
to just `self-insert expand-abbr`. This also fixes the bug where space
would cancel pager search.
By not manipulating each line or even each file at a time, we can go
back to `string` and piece together a pipeline that will execute
significantly faster than shelling out to `awk` will. This also removes
one of the few dependencies on `awk` in the codebase.
With this change, `__fish_print_hostnames` now finishes ~80% faster than
it used to a few commits back.
Reordering the `getent hosts` and read from `/etc/hosts` combined with
minimizing shelling and job invocations for parsing the output results
in a profiled and benchmarked ~42% decrease in the time it takes to run,
and that's on a machine with a very small hosts list in the first place.
This update also fixes the hadling of IPv6 addresses in the hosts
output, which were previously ignored, and ignores 127.* loopback
addresses in addition to the 0.0.0.0 address (plus adds support for
shorter IPv4 notations).
$__fish_git_prompt_use_informative_chars will use the informative
chars without requiring informative mode (which is really frickin'
slow!).
See #5726.
[ci skip]
This previously effectively checked `string split ' '`s return status,
which was false if it didn't split anything. And while that should be
true if getent fails (because it should produce no output), it's also
true if it doesn't print a line with multiple aliases. Which should be
fairly typical.
Instead we use our new-found $pipestatus to check what getent returns,
in the assumption that it'll fail if it doesn't support hosts.
Follow up to 8f7a47547e.
[ci skip]
`getent hosts` is expensive-ish - ~50ms, so we don't want to run it
twice just to figure out it works.
Apparently this works everywhere but CYGWIN and possibly older
OpenBSD, but we don't want to explicitly blacklist those.
[ci skip]
If you changed $__fish_git_prompt_show_informative_status, it
triggered a variable handler, which erased the chars, but neglected to
unset $___fish_git_prompt_init, so we just kept chugging along with
empty characters.
What's the hardest thing in CS again? Cache something something?
[ci skip]
This way we use our core file completion code, which is much more
flexible than we can easily achieve directly in script (which would
require e.g. an `expand` builtin, and case-insensitive globs).
Fixes#5896.
This was quite famously rather complicated.
We drop a bunch of cases - we can't handle tmux-starting-terminals
100% accurately, so we just don't try. It should be quite rare that
somebody starts a different terminal from tmux.
We drop the `tput` since it is useless (like terminfo in general for
feature-detection, because everyone claims to be xterm).
So we just check if we are in konsole, iTerm, vte or genuine-xterm.
Fixes#3696.
See #3481.
This runs build_tools/style.fish, which runs clang-format on C++, fish_indent on fish and (new) black on python.
If anything is wrong with the formatting, we should fix the tools, but automated formatting is worth it.
Dealing with macOS output in a fast manner using `string` is surprisingly hard, given that it features lines like
gls(1), ls(1) - list directory contents
Printing the "gls" with the description and the "ls" with the description requires a `while read` loop, and that's too slow.
This reverts commit 7784a5f23c.
[ci skip]
I did not realize builtins could safely call into the parser and inject
jobs during execution. This is much cleaner than hacking around the
required shape of a plain_statement.
* Honour `dirprev` scope
Honour the scope of the `dirprev` variable if it is universal
and avoid to shadow it with a global. This enables to share
the `cd` history between sessions.
* Honor dirnext and __fish_cd_direction scope
If these variables exist in the universal scope, do not shadow them
`eval` has always been implemented as a function, which was always a bit
of a hack that caused some issues such as triggering the creation of a
new scope. This turns `eval` into a decorator.
The scoping issues with eval prevented it from being usable to actually
implement other shell components in fish script, such as the problems
described in #4442, which should now no longer be the case.
Closes#4443.
If we switch the bind mode, we add a "force-repaint" there just to
redraw the mode indicator.
That's quite wasteful and annoying, considering that sometimes the prompt can take
half a second.
So we add a "repaint-mode" function that just reexecutes the
mode-prompt and uses the cached values for the others.
Fixes#5783.
* Add "expand-abbr" bind function
This can be used to explictly allow expanding abbreviations.
* Make expanding abbr explicit
NOTE: This accepts them for space only, we currently also do it for \n
and \r.
* Remove now dead code
We no longer trigger an abbr implicitly, so we can remove the code
that does it.
* Fix comment
[ci skip]
This searched for package.json in any parent, so just like finding
.git and .hg directories it _needs_ to use the physical pwd because
that's what git/hg/yarn use.
In general, if you do _any_ logic on $PWD, it should be the physical
path. Logical $PWD is basically only good for display and cd-ing
around with symlinks.
[ci skip]
This called `eval $fish_browser --version` to figure out if it is
lynx.
That's really not worth it just to support edge-cases using a rather
unusual browser, to work around a bug in it.
Instead we just see if the browser name starts with "lynx", which
should work in 99.9% of cases.
This created another local version of the variable just for the if-block.
Can't say I love the space prefix, but then I think we have too many
of these modes anyway.
If you use these to figure out if there _are_ staged files, or dirty
or whatever, you currently need to check the output, which relies on
the configured character.
Instead, we let them also return a useful status.
Notably, this is *not* simply the status of the git call.
__fish_git_prompt_X returns 0 if the repo is X.
This works for untracked, but the "diff" things return 1 if there is a
diff, so we invert the status for them.
See #5748.
[ci skip]
A function file for a function used only by one completion (and
unlikely to be used anywhere else).
If another user shows up, we can move it out again.
Part of #5279
[ci skip]
Similar to the last commit, only for the in-terminal-paste stuff.
Also cleans up the comments on bracketed paste a bit - nobody has
stepped forward to report problems with old emacsen or windows, so
there's no need for a TODO comment.
See #4327.
If we're at the beginning of the commandline, we trim leading whitespace so we don't trigger histignore.
Since that's the main issue of problems with histignore:
Closes#4327.
Apparently if you install gnu coreutils on OpenBSD, the tools are
g-prefixed. So we definitely want to just alias that rather than
provide our lousy shell script implementation.
25d83ed0d7 (included in 3.0.0) added a `string` check that
did not use `--`, so negative numbers were interpreted as options.
Apparently nobody is using this.
(Again, this is for the `seq` fallback used on OpenBSD)
That seems suspect.
It removes files starting with "# Autogenerated", but those files
usually do not show up in ~/.config - they're in ~/.local/share.
So let's be careful and not mess with the user's config.
(I'm pretty sure that the previous commit re-enabled cleanup as the
`~` was quoted before then)
[ci skip]
This did `argparse`, but only handled "--help". Any other options
would be ignored.
Instead, we just pass all the options through to python, and that'll
display help if needed.
This allows passing e.g. `--verbose 1` to help with debugging.
[ci skip]
NetBSD's man is unusual in that it doesn't understand an empty
$MANPATH component as "the system man path", and doesn't have a
`manpath` or `man --path`.
It has a `-m` option that would be useful, but other mans also have a
`-m` option that isn't, so detecting it is tough.
It does have a `-p` option that almost does what one would want here,
so we hack around it to make things work.
Fixes#5657.
[ci skip]
It turns out the default gettext on the sunny operating system with
the many names interprets at least `\n` itself, so we'd end up
swallowing it.
This allows us to move past the interactive tests and onto the expect
ones.
See #5472.
This exposes it more, since it's quite an important function.
We should do the same with the other vcs functions.
We leave a compatibility shim in place for now.
300ms was waaay too long, and even 100ms wasn't necessary.
Emacs' evil mode uses 10ms (0.01s), so let's stay a tad higher in case
some terminals are slow.
If anyone really wants to be able to type alt+h with escape, let them
raise the timeout.
Fixes#3904.
Prior to this fix, we would write to a fifo via cat >$filename & .
However in some cases (and soon in all cases) we open the file before
the fork, not after. This results in a deadlock because the file open
cannot succeed until a write begins.
Switch to using tee to write to the file. Because tee opens the file itself,
fish is no longer responsible and the deadlock is resolved.
Prior to this fix, we would write to a fifo via cat >$filename & .
However in some cases (and soon in all cases) we open the file before
the fork, not after. This results in a deadlock because the file open
cannot succeed until a write begins.
Switch to using tee to write to the file. Because tee opens the file itself,
fish is no longer responsible and the deadlock is resolved.
We were checking for the $TMUX variable to determine if we were
running under tmux. However when running the tests, the terminal becomes
expect, even though the TMUX variable is still set, so we spew tmux-isms
at expect. Check the value of $TERM for 'screen'.
This allows disabling _just_ the informative status.
We still also use the dirty and untracked variables, but only if
informative status hasn't explicitly been enabled.
If either of the two git config variables:
- bash.showDirtyState
- bash.showUntrackedFiles
is explicitly set to false, we will disable informative status, and
fall back on the non-informative version (most likely still with
either dirty or untracked files, since we already use the variables
for that).
These vars are read by the official git prompt, so we use them instead
of inventing our own "fish.showInformativeStatus".
(Note: This also uses $__fish_git_prompt_showdirtystate and friends,
but only when there's nothing set in the repo, and there's really no
reason to set those to false if using the informative status)
Fixes#5551.
[ci skip]
Expands the utility of `type -p foo` by allowing it to print the path to
the script that defines `foo` when `foo` is a valid function that was
sourced from a path on disk (rather than interactively defined).
This does not change the behavior of `type -P`/`type --force-path`,
which should have already been used if the desire was to resolve the
path to an executable file (otherwise the output would have been blank
if a function was shadowing an executable file of the same namea), so no
backwards compatibility issues are expected.
Previously, using special regex characters or slashes would result in an
error message, when pressing tab in a command-line such as
"man /usr/bin/time ".
Make it so that the generated completion has the form \t\n
when the optional description has been ommitted - otherwise
the original option's description gets inherited and is seen hundreds
of times repeating in the pager.
GNU ls's --indicator-style=classify is the same as POSIX -F.
Refactor and change command testing logic so that we define the
function in the same place for all platforms, and use -F on all
the platforms when stdout is a TTY.
A person stuck installing it just for fish on their server
doesn't want to waste time installing the wrong one, so assuage that.
Also tweak to look nicer with 80 columns
As discussed in #5492, it would be good if running fish_config without
Python actually told the user to install Python.
Further, let's give the person some hints on how to configure these
things by hand, since they may have to.
Which is 4, apparently.. (builtin_set.cpp returns ENV_NOT_FOUND)
here. This was previously hardcoded to our 121, which used to be
what builtins used for invalid arguments.
4 is pretty arbitrary but at least this is more consistent.
I had previously introduced a lot of updates and fixes to npm registry
based completions for `yarn` but hadn't ported them to `npm` as well
(although they can be dropped in as-is). This patch shares the code
between the two, which resides in an explicitly sourced multi-function
fish script.
* Severely extended the sorin theme
This theme should now mostly match the original.
* Removed superfluous whitespace
* Inlined external links as ASCII art
* Made myself the author of the sorin theme
* Removed superfluous read delemiter
* Renamed __fish_git_action to fish_print_git_action
* Adde a minor comment
Cleaned up the code to no longer replicate in fishscript what fish
already does (and caches to boot) in C++ in setting up the paths to the
user configuration directory.
Also introduced a `$__fish_user_data_dir` instead of the sporadic
definitions of `$userdatadir` that may or may not go through
`XDG_DATA_HOME`.
I spent some time figuring out $TERM_PROGRAM_VERSION and Terminal.app's
capabilities over time. [1]
Only use OSC 7 if running on the version of Terminal.app that added it
or newer. In the past this would have been harder because `test` couldn't
do float comparisons.
cleanup:
Don't bother setting a local $TERM_PROGRAM if it's unset: quoting
is enough to keep test happy. For the version numbers, 0"$var" is safe
against unset variables for numerical comparisons.
[1]: https://github.com/fish-shell/fish-shell/wiki/Terminal.app-characteristics
Instead of maybe adding "-s" and "-M" if "-s" hasn't already been
given, just add "-s" to _every_ bind invocation, and "-M" to those who
need it.
Fixes#5028.
Largely reverts 007d794b6e.
fish_indent is extremely resource-intensive on large inputs and can crash; it also does not handle
invalid characters gracefully.
Work on #5402.
man.fish can be clarified a bit, by removing a superfluous early return. Additionally, performance can be
(ever so slightly) improved, by using the empty string to suffix an extra colon when `$MANPATH` is empty, as
described in `manpath(1)`. As `man` will internally call `manpath` as it starts, this eliminates a redundancy.
- No longer uses sed, sort, uniq, uname
- Stop doing too-clever filtering (e.g. the kernel thread stuff never
- really worked)
- Don't truncate for all OSen, instead just use the (correctly
- truncated) comm field.
- Colorize history search output when interactive, using
fish_indent. This is the same way we colorize `type` output.
- Ask less to act like `cat` if the output will fit in the
terminal window, so it's less jaring with short output.
- history is viewed in a pager when interactive, but pagers
typically strip escape codes. We accomplish the above by
doing exactly what `git` does[1] when it has colored output
for a pager:
if $LESS is unset, set it to enable -R, -F, and -X options.
if $LV is unset, set it to -c.
[1]: 398dd4bd03/pager.c (L87)
Fixes some potentially unsafe uses of direct substitution into regex
expressions and also switches some completions to regex-based now that
there is a safe way of using it.
In writing the completion script for openocd I found the need to
complete paths at the command-line as if they were relative to a
path other than the current $PWD. Given that `$PWD` is currently
global in fish (i.e. no side-effect free `cd` within a subshell)
this is probably good to have for other completions too.
This also fixes a bug in support for explicitly supplying the
description for completions via a `$argv` parameter, which prefixed
the description with `\t` (which is correct) except it did so in
the local scope within an `if` statement, meaning the changes never
had any effect and in the output the description was directly
concatenated to the completions, instead of separated by a tab.
Don't attempt to complete against package names if the user is trying to
enter a switch to speed things up.
Also work around #5267 by not wrapping unfiltered `all-the-package-name`
calls in a function.
We do a bunch of escaping before to make `eval` work, and that needs to be removed as well or fragment-urls don't work.
This reverts commit e9568069a7.
Use clang/clang++'s own autocompletion support to complete arguments. It
is rather convoluted as clang generates autocompletions for a portion of
the current token rather than the entire token, e.g. while `--st` will
autocomplete to `--std=` (which is fine by fish), `--std=g` will
autocomplete to `gnu...` without the leading `--std=` which breaks fish'
support for the completion.
Additionally, on systems where clang/clang++ is the system compiler
(such as FreeBSD), it is very often for users to invoke a newer version
of clang/clang++ installed as clang[++]-NN instead of clang. Using a
monkey-patched version of `complete -p` to support that without breaking
(future) completions for commands like `clang-format`.
Closes#4174.
If you're using the old binding that only clears the commandline and
doesn't preserve its contents and start a new line, you can use
```fish
bind \cc "commandline -f cancel; commandline ''"
```
instead.
Closes#4298.
For some weird reason we only used $editor if it wasn't empty, but
then failed to fail if it was.
This will now print an error and use fish, just like if the $EDITOR
value is invalid in any other way.
Fixes#5257.
The hg prompt walks up the directory hierarchy to decide if we are in a
repo subdirectory. Because hg is an external command, it resolves symlinks.
Switch to using pwd -P so hg and fish will have the same view of the hg repo.
Based on comment:
https://github.com/fish-shell/fish-shell/pull/5190#issuecomment-421912360
This allows for marking certain bindings as part of a preset, which allows us to
- only erase those when switching presets
- go back to the preset binding when erasing a user binding
- only show user customization if requested
- make bare bind statements in config.fish work (!!!11elf!!!)
Fixes#5191.
Fixes#3699.
- Add support for:
- Jumping to the character before a target.
- Repeating the previous jump (same direction, same precision).
- Repeating the previous jump in the reverse order.
- Enhance vi bindings.
Ordering of directories above files was introduced in a recent change to
the same script. By default it does not matter as completions are sorted
by fish internally, but this allows the use of `-k` to sort files before
directories (or piped to `sort -r` for vice-versa).
Use `apt-cache show` instead of `apt-cache packagenames` to efficiently
print package names and a brief description instead of the placeholder
(localized) "Package" text that was previously printed. This applies to
both available and installed packages (for inistall and remove operations,
respectively).
TODO: update `__fish_print_packages` for non-debian platforms to do the
same.
When listing packages already installed (e.g. for use with `apt remove
...`), do not consider packages return by `dpkg --get-selections` with
state 'deinstall'.
Previously the `string replace` pattern was matching both 'install' and
'deinstall' packages.
Utilized the `--install` flag added in commit #8c09d6e.
Limit `eopkg remove/autoremove/check ...` completions to installed packages.
Limit `eopkg install/upgrade/info ...` completions to available packages.
Prior to this fix, __fish_describe_command would error if the
input contained any special characters, because it would be interpolated
into a regex. Hack in a guard to do nothing if the input contains
anything other than [a-zA-Z0-9_ ]
Added a new flag `--installed` via `argparse` to `__fish_print_packages`
which indicates that only installed packages should be listed.
TODO: Other non-debian/apt platforms should take advantage of this flag/
behavior as well.
Executes `whatis` safely, returns at most one line, and strips the name
of the command from the start of line, returning a value fit for use as
the description parameter for a completion argument value.
Fixes
- Use the actual path when skipping unusable paths to fix all Include
directives being skipped when there is no ~/.ssh directory
- Prevent "No matches for wildcard" message
Improvements
- Skip paths that are directories since we only want files
- Remove `cd` as it is not needed
__fish_complete_suffix assumed that the only literal . in a path
would be the . before an extension, and stripped accordingly. This
behavior has been there for a long time, but broke many things
including completion of relative paths and completion of paths with
a literal . in a directory name.
__fish_complete_suffix does not just complete extensions (or at the
very least, it no longer does just that) but rather any suffix, so
isolating the path name without the extension was unnecessary in all
cases.
With a blank $suff (i.e. complete all files), __fish_complete_suffix
returned directories twice, once with the trailing `/` and once without.
This fixes that, and additionally speeds up the code by no longer
shelling out to `sort -u` as we no longer rely on brace expansion to
enumerate directories and files simultaneously.
In general, this behavior would occur when a directory exists that
matches the suffix search pattern (so a dir named 'foo.bar' with a
search pattern '.bar' would return 'foo.bar' twice).
Runtime has dropped from ~22ms to ~8ms on my machine, while also
returning more correct results.
This prints an escape sequence, so it can break scp or similar when
someone has an unqualified
fish_vi_key_bindings
in config.fish and happens to run a terminal that can set the cursor.
Under FreeBSD, as annoying as it is, switches must directly follow the
command or subcommand in question, and cannot come after actual payload
argument. Calling `zpool get all -H` instead of `zpool get -H all`
caused error messages to be spewed to the console under FreeBSD when
simply completing `zfs <TAB>`, this should fix that. The change should
also be compatible with other operating systems (namely Linux) that
don't have this requirement, as they (generally) allow arguments to come
before _or_ after the primary non-switch argument (though I do not have
access to a zfs-enabled Linux machine to test this).
Previously, trying to complete a token with any of these
expansion-related characters would cause the completion to return no
results, as it would emit expanded values which weren't matched by the
autocompleter.
Akin to __fish_complete_suffix, __fish_complete_directories now attempts
to complete the current commandline token if no token is explicitly
passed in as an argument.
The prompt is a fallback that is overridden via a function file
anyway.
Do that with the title as well, so we can use just builtins.
This removes error messages when $fish_function_path is borked.
Turns out that `make -pn` actually takes a while - about 300ms on
fish's makefile.
That's quite a bit of time just to throw away the output and use the
exit code.
So we just check for "GNU" in the version string.
It would be nice to just _do_ the completion and fall back on the
BSD-style if it doesn't work, but that is tricky to do with the pipe
to `awk` - the awk expression actually does not fail if `make` does
not print output.
And I don't know enough about awk to change that.
For usage in completion scripts.
Unlike `__fish_is_first_token` (which is probably not correctly named),
`__fish_is_first_arg` returns true regardless of whether existing tokens start with `-`
or not, to be used when an arg cannot be used with any other argument.
`__fish_prev_arg_in` is similar to `__fish_seen_...` but it explicitly
tests the preceding token only, for arguments that take only a single
parameter.
As it turns out, for some terminals backspace is \b but only when
preceded by \e.
All this makes about as much sense as the english language.
Fixes#4955.
The previous completion generation was broken for several reasons:
* ./foo would break detection of suffix due to the leading . being
interpreted an extension marker,
* ./foo would be completed as foo, which would be excluded from
matching inrcomplete.cpp
