When adding a VLAN-enabled interface, it is named like enp0s31f6.100@enp0s31f6
with the physical interface being appended behind an @.
But subsequent ip commands operate on the interface name without this suffix,
so it needs to be removed when completing interface names in __fish_ip_device
These should be friendlier, but aren't as pedantically accurate.
I think the term "index" is terrible and much prefer "staging area".
Also "rev-parse" simply must be believed to be seen, it can't be
described in a single paragraph. (did you know you can use `git
rev-parse --parseopt` as a replacement for `getopt` in arbitrary
shell scripts?)
"socket.has_ipv6" is basically useless - it tells you python has
been *compiled* with ipv6 support.
Instead just try ipv6 and if that fails with EAFNOSUPPORT (checking
the actual errno), try v4.
Yes, I explicitly do not care to test this on python2.
Fixes#3857
I have an alias called "lg" for
log --color --graph --pretty=format:\'%Cred%h%Creset -%C(yellow)%d%Creset %s %Cgreen(%cr) %C(bold blue)<%an>%Creset\' --abbrev-commit --first-parent
Having that in my completions ensures that git commands essentially
always use one column at most. That's not great, so we now shorten it
to 35 chars (plus an annoying 2 for ".." because I can't be bothered
to check for unicode support - an argument for a "string ellipsize", I guess?)
"git add ./" shows only hidden files (if at all). It should show all files
that can be added.
The problem is that candidates come from "git status" which prints clean
relative paths. Let's allow some unclean paths.
This is far from a complete fix but it should work for the common scenario.
Observe that wildcard_complete_internal() actually filters out all non-hidden
files, if the query is `./`.
Closes#9091
This reimplements ridiculousfish/control_r which is a more future-proof
approach than #6686.
Pressing Control+R shows history in our pager and allows to search filter
commands with the pager search field.
On the surface, this works just like in other shells; though there are
some differences.
- Our pager shows multiple results at a time.
- Other shells allow to use up arrow/down arrow to select adjacent entries
in history. Shouldn't be hard to implement but the hidden state might
confuse users and it doesn't play well with up-or-search, so this is
left out.
Users might expect the history pager to use subsequence matching (fuzzy
matching) like the completion pager, however due to the history pager design it
uses substring matching. We could change this in future, however that means
we would also want to change the ordering from "reverse-chronological" to
"longest common subsequence" (e.g. what fuzzy finders do), because otherwise
a query "fis" might give this ordering:
fsck /dev/disk/by-partlabel/Linux\x20filesystem
fish
which is probably not what the user wants.
The pager shows only a small number of history items at a time. This is
because, as explained above, the history pager does not support subsequence
matching, so navigating it does not scale well.
Closes#602
These are used in prompts only, and it feels weird not to have them.
In practice, fish_color_host_remote would not be used at all (just
because you switched from the default theme!), while fish_color_status
would fall back on a different value.
That'll be adjusted in the next commit.
This can be used to print the modification time, like `stat` with some
options.
The reason is that `stat` has caused us a number of portability
headaches:
1. It's not available everywhere by default
2. The versions are quite different
For instance, with GNU stat it's `stat -c '%Y'`, with macOS it's `stat
-f %m`.
So now checking a cache file can be done just with builtins.
/etc/hosts specifies, that everything after a #-character is to be
treated as a comment. The current __fish_print_hostnames however only
considers #-characters at the beginning of a line.
Thus the comment from following valid hosts-entry would end up in the
completion output:
1.2.3.4 myhost # examplecomment
getent hosts properly handles comments.
- Generally better descriptions,
- uname checks to not complerte unavailable options on
NetBSD, FreeBSD, DragonFly, Solaris, Darwin
- Describe/complete GNU's --time=access,mtime... arg
- Remove -f it is a no-op and not documented.
When we want to print something while the prompt is still active, we move the
cursor by printing a newline for each line in the prompt beyond the first
one. As established by 80fe0a7fc (fish_job_summary: Format message better
for multiline prompts, 2022-06-28), our use of "string repeat" actually
prints an extra newline. Let's remove it here as well.
This was supposed to be number of lines in the prompt minus 1, but
string repeat added one.
Also it triggered even in case of the stopped job message, which is
already repainted differently.
So we add it when we need to repaint ourselves.
As a bonus add a newline before in that case so the message isn't
awkwardly printed into the commandline.
Fixes#9044.
This is sort of slow because it's called hundreds of times.
We used to have a cache, introduced in ad9b4290e, but it was removed
in fee5a9125a because it had
false-positives.
So what we do, because the issue is that this is called hundreds of
times per-commandline, we cache it keyed on the commandline.
This speeds up `complete -C'git sta'` by a factor of 2.3x.
Commit ad9b4290e optimized git completions by adding a completion that would
run on every completion request, which allows to precompute data used by
other completion entries. Unfortunately, the completion entry is not run
when the commandline contains a flag like `git -C`. If we didn't
already load git.fish, we'd error. Additionally, we got false positive
completions for `git diff -c`.
So this hack was a very bad idea. We should optimize in another way.
Discussions with the tmux maintainer show that:
1. We no longer need the passthrough sequence at all (and it's
deactivated by default)
2. Tmux can check if the outer terminal supports cursor shaping
Fixes#8981
This commit lets you check the manpage for a leading command by moving
the cursor over it, matching the behavior of tab complete.
It also lets you select the man page for the base of a two-part command
like `string match`.
The additional regex case is added because
`commandline -t` returns an empty string when the cursor is after a
space, e.g. at the end of 'sudo ', which the later checks don't handle.
This diagram shows the manpage picked for different cursor positions:
> sudo -Es time git commit -m foo
+-------++---++--++------------+
| || || || |
| || || |+------------+
| || || | git-commit
| || |+--+
| || | git
| |+---+
| | time
+-------+
sudo
* updated function __fish_print_portage_repository_paths.fish to support file, dir and modified defaults
* Revised version of share/functions/__fish_print_portage_repository_paths.fish
* improved syntax and regex as suggested
The recent improvements to multiline prompts and vi-mode in #3481 appear
to be sufficient to make iTerm2 well behaved, so remove our hack which
disabled it by default.
Fixes#3696
git versions that only support porcelain v1 output (like on CentOS 7,
which has 1.8.3) weren't completing files prefixed with : correctly iff
the name after the colon was also a valid relative path.
Fixes the tests on CentOS 7.
This removes the awkward secondary logic.
Note that we still ship a function called `__terlar_git_prompt`
because people who picked the prompt will still be calling it - we
don't update the prompt.
Git's pathspec system is kind of annoying:
> A pathspec that begins with a colon : has special meaning. In the short form, the leading colon : is followed by zero or more "magic signature" letters (which optionally is terminated by another colon :), and the remainder is the pattern to match against the path. The "magic signature" consists of ASCII symbols that are neither alphanumeric, glob, regex special characters nor colon. The optional colon that terminates the "magic signature" can be omitted if the pattern begins with a character that does not belong to "magic signature" symbol set and is not a colon.
So if we complete `:/foo`, that "works" because "f" is alphanumeric
and so the "/" is the only magic character here.
If, however the filename starts with a magic character, that's used as
a magic signature.
So we do what the docs say and terminate the magic signature after the
"/" (which means "from the repo root").
Fixes#9004
This makes it so
1. The informative status can work without showing untracked
files (previously it was disabled if bash.showUntrackedFiles was
false)
2. If untrackedfiles isn't explicitly enabled, we use -uno, so git
doesn't have to scan all the files.
In a large repository (like the FreeBSD ports repo), this can improve
performance by a factor of 5 or up.
Previously, `kill-whole-line` kills the line and its following
newline. This is insufficient when we are on the last line, because
it would not actually clear the line. The cursor would stay on the
line, which is not the correct behavior for bindings like `dd`.
Also, `cc` in vi-mode used `kill-whole-line`, which is not correct
because it should not remove any newlines. We have to introduce
another special input function (`kill-inner-line`) to fix this.
Arguments to --ignored were introduced in Git 2.16, from January 2018.
The git completions specifically work around this, allowing older
versions to be used; match this in the git prompt.
Fixes the tests on CentOS 7.
When switching this to use `git status`, I neglected to use the
correct definition of what a "dirty" and a "staged" change is.
So this now showed already staged files still as "dirty".
Fixes#8986
This adds a path builtin to deal with paths.
It offers the following subcommands:
filter to go through a list of paths and only print the ones that pass some filter - exist, are a directory, have read permission, ...
is as a shortcut for filter -q to only return true if one of the paths passed the filter
basename, dirname and extension to print certain parts of the path
change-extension to change the extension to a different one (as a string operation)
normalize and resolve to canonicalize the paths in various flavors
sort to sort paths, also only using the basename or dirname as a key
The definition of "extension" here was carefully considered and should line up with how extensions are actually used - ~/.bashrc doesn't have an extension, but ~/.conf.d does (".d").
These subcommands all compose well - they can read from arguments or stdin (like string), they can use null-delimited input or output (input is autodetected - if a NULL happens in the first PATH_MAX bytes it switches automatically).
It is both a failglob exception (so like set if a glob passed to it fails it just doesn't get any arguments for it instead of triggering an error), and passes output to command substitution buffers explicitly split (like string split0) so newlines are easy to handle.
The best effort parser over-eagerly strips all extensions off a manual
page file's basename, hence commands containing dots will output
completions for a different command.
Prominent examples are the mkfs.*(8) and fsck.*(8) families, e.g.
completions for mkfs.xfs.8.gz are generated for the command `mkfs`
is not only incorrect but can also filename collisions in case .fish
files for multiple commands are put into the same directory.
Thus do not strip everything past the first dot from the left, but
instead merely strip expected extensions from the right.
edit_command_buffer uses the "norm" command for moving the cursor to a column
with the "|" primitive. The problem is that the user can remap "|". Fix this
by using the "norm!" variant which ignores user mappings (see ":h norm").
Closes#8971
Previously, running `fish_add_path /foo /foo` would result in /foo
being added to $PATH twice.
Now we check that it hasn't already been given, so we skip the
second (and any further) occurence.
`wg show` command shows entire interfaces configuration, not just the
list. This breaks completion when running fish from root, because
command output looks like this:
interface: wg0
public key: fred2rX85AxpcTObLuiWTzkRPZaXjnhd1C4XOdZOGWs=
private key: (hidden)
listening port: 12345
fwmark: 0xca6c
peer: g2YHHDkxmgoT9EV0TxKtq556WLXpaOh4zgC5L7EAGTQ=
endpoint: 192.168.88.50:54321
allowed ips: 0.0.0.0/0, ::/0
latest handshake: 1 minute, 37 seconds ago
transfer: 1.83 MiB received, 927.19 KiB sent
To show just the list of active interfaces, `wg show interfaces` should
be used instead.
man-db's man 2.7 as shipped in OpenSUSE fails to set a non-zero
exit code when invoked like "man ls-some/dir". This means
that we fail to display the man page if the commandline is
"ls some/dir". Work around this by never treating tokens
with slashes as subcommand.
Because TAGs are easy to type and complete, but commits with its SHA are
difficult to complete manualy. Keep commits and TAGs order to show more recent
commits first.
Pressing Ctrl-D while a command is running results in a null key code in
our input queue. That key code is bound to insert a space (without expanding
abbreviations). Make it only insert a space if the commandline is non-empty,
to accommodate this use case.
This probably affects other keys as well.
Closes#8871
Whenever completing any git commandline, we invoke __fish_git_using_command
173 times*. Every invocation calls "commandline" and "argparse"
to the same effect. Let's parse the command line once, and reuse the results
later.
I'm observing a speed-up from 200ms to 120ms with
perf stat -r 10 buildrel/fish -c 'complete -C "git checkout ">/dev/null'
Alternative solutions:
1. teach fish to cache such things automatically.
2. rewrite git completions to compute most completions in a single function,
which will naturally avoid redundant work. This sounds viable but it's
a lot of work.
* we have a thousand uses of __fish_git_using_command, so I'm not sure why
it's only 173.
See the discussion in #8266
As we've noticed a few times now, mingw/msys/cygwin has a fairly
horrible kill implementation that annoys us here.
However our workaround wasn't enough - "mingw" is also a name that is
used here and "msys" can also be a substring.
Also we need to silence the `kill` because it's better to not list the
signals than it is to spew errors.
Fixes#8915.
Some terminals can be configured to send variuos escape sequences for keys
that could historically not be detected. Turns out some usage pattern rely
on those quirks.
Shift+Space is easy to mistype when wanting to insert a space (especially
when typing ALL CAPS). Map it to Space, to match user expectations.
Similarly for Control+Return, for which xterm can be configured to send
something other than \cr:
echo 'XTerm.vt100.modifyOtherKeys: 1' | xrdb && xterm
I'm working on a change to builtin bind that allows to bind CSI sequences via
human-readable key names (#3018) but for now let's just map the raw sequences.
Closes#8874
micro only parses the [FILE]:LINE:COL syntax
if the parsecursor option is enabed
in the meanwhile, the +LINE:COL syntax is unambiguous and always valid
You can use an index with vared, like `vared PATH[4]`. However this was
inadverently broken in fa2450db30, because you cannot use `read` to
modify an element of a variable, only the whole variable. Fix this.
Unfortunately this means using another local variable, so we name it
__fish_vared_temp_value instead of just temp so that collisions are
unlikely.
localectl may emit an error for whatever reason. The localectl
completion runs localectl in a command substitution so our stderr
redirect doesn't apply. Just redirect to null. Hopefully this fixes the
tests.
I *think* this is printing
> debconf: DbDriver "passwords" warning: could not open /var/cache/debconf/passwords.dat: Permission denied
On Github Actions?
Might need to adjust the test to store the output.
* Print message in set_fish_path -v when a path doesnt exist
* Update changelog
* Remove "; or continue"
* use printf instead of echo, avoid localizing the path
This is a follow-up to #8811, which fixed fish_config on newer versions of
Sailfish OS.
Using the previous method to open the fish_config URL on Sailfish OS worked
only on 4.4 (and 4.3 IIRC), but not on older OS versions. Opening the URL
using xdg-open works well with new and old OS version, and has been tested on
- Sony Xperia 10 II running SFOS 4.4 aarch64
- Sony Xperia XA2 Ultra running SFOS 4.4 armv7hl
- Sony Xperia X running SFOS 4.1 armv7hl
- Jolla Phone running SFOS 3.4 armv7hl
Closes#8872
* feat(completions): add sops completions
* fix: start descriptions with uppercase letter
* fix: shorten descriptions
* fix: use spaces instead of ;
* fix: typo
* feat: better option than __fish_is_first_token
* feat: improve __fish_sops_commands function
* fix: remove useless code
* fix: fix the second argument is not called
As explained in the parent commit, if we print things to the command line,
we move the cursor down before redrawing a multi-line prompt. This is a
workaround to avoid erasing what we printed.
We forgot to do add this workaround to fish_job_summary. When running
`sleep 1 &` with a multiline prompt, the job exit notification is immediately
overwritten (most of the time). This can be observed consistently on Linux
by waiting before redrawing:
diff --git a/share/functions/fish_job_summary.fish b/share/functions/fish_job_summary.fish
index a552fabbc..f457ee8e8 100644
--- a/share/functions/fish_job_summary.fish
+++ b/share/functions/fish_job_summary.fish
@@ -52,6 +52,7 @@ function fish_job_summary -a job_id is_foreground cmd_line signal_or_end_name si
string repeat \n --count=(math (count (fish_prompt)) - 1) >&2
if test $is_foreground -eq 0; and test $signal_or_end_name != STOPPED
+ sleep 1
commandline -f repaint
end
end
Move the cursor down to work around this. In future, we could avoid calling
fish_prompt. Also, this solution add an extra blank lines before the next
prompt. With a real fix, we could get rid of that. Even worse, sometimes
there are two blank lines instead of one (for a two-line prompt).
Fixes#8817
We have some key bindings that print directly to the terminal while the user
is still typing the command line. Thereafter, we redraw the command line,
so the user can resume typing. To redraw a multiline command line, we first
erase several lines above the cursor. To not erase the key bindings' output,
we move the cursor down that many lines.
Simplify the logic; no functional change.
This conditionally set a function variable in an unsafe way.
If you do something like
```fish
if condition
set -f foo bar
end
```
then, if the condition was false, $foo could still use a global variable.
In this case, alias would now fail if a variable $wraps was defined globally.
This reverts most of commit 14458682d9.
The message rewording can stay, it's *fine* (tho it'll break the
translations but then we'd need a real string freeze with a
translation team for those to be worth anything anyway, soo)
* completions/lxc: parse container names with numbers and other commands
* Revert CHANGELOG.rst
* Code Review: use multiple subcommands ability of __fish_seen_subcommand_from
git.fish loads git-foo.fish completions.
As reported in #8831, this can be slow when the user has run something like
complete git-foo -w 'git diff'
because git.fish runs 'complete -C "git-autofixup "' at load time.
Commit 09161761c (Complete custom "git-foo" commands from "git foo",
2021-01-24) did that to avoid adding filename completions for "git foo".
Drop that check.
This means that users who don't want filename completion for "git foo",
need to define at least one custom completion for "git-foo", like
complete git-foo -f
This was already apparently supposed to work, but didn't because we
just overrode errno again.
This now means that, if a correctly named candidate exists, we don't
start the command-not-found handler.
See #8804
-d has been removed in FreeBSD 13 & monterey
-t has also been removed from date(1)
-n has been "Obsolete flag, accepted and ignored for compatibility",
for a while, leave it out.
-R added for RFC 2822
-I added for ISO 8601
Some description changes
The tmp and prompt variables collide with variables used as arguments.
Just avoid them entirely, at the cost of making the internals of the
functions somewhat more complicated.
Closes#8836.
Otherwise this was 100% monospace.
But since we have a specific list of fonts that we have checked, let's
use the same list instead of just adding "Helvetica" again.
These printed an error on load if networkmanager isn't running.
Since at that point it's not useful to complete anything, just try the
first call and if that fails exit.
This tried migrating old abbreviations *twice* - once from the 2.3
scheme to the 2.4 one, and once from that to the 3.0 scheme.
Since this is purely for upgrading from fishes < 3.0, and basically
untested, let's remove it.
If anyone does that upgrade, they'll simply have to reexecute the abbrs.
Because we reload changed function files, a common issue on upgrading
to 3.4.0 is that fish_title causes errors.
So we simply use the oldschool syntax.
* New -n flag for string join command.
This is an argument that excludes empty result items. Fixes#8351
* New documentation for string-join.
The new argument --no-empty was added at string-join manpage.
* New completions for the new -n flag for string join.
* Remove the documentation of the new -n flag of string join0
The reason to remove this new argument in the join0 is that this flag basically doesn't make any difference in the join0.
* Refactor the validation for the string join.
The string join command was using the length of the argument, this commit changes the validation to use the empty function.
* Revert #4b56ab452
The reason for the revert is thath the build broke on the ubuntu in the Github actions.
* Revert #e72e239a1
The reason the compilation on GitHub broke is that the test was weird, it didn't even run it, Common CI systems are typically very very resource-constrained.
* Resolve conflicts in the string-join.rst.
* Resolve conflicts in the "string-join.rst".
commit #1242d0fd7 not fixed all conflicts.
This was an oversight in 7fb3880b96, and would have spewed the existing rustup completions if this file was sourced twice (which probably won't happen given autoloading, to be fair).
I have no idea why this kept one component in the one case and none in
the other.
Because we already aggressively shorten the command, we can keep the directory.
Since the color previews are now wider, we had quite a wide range
where there would only be one. Remove the border around the content
earlier so windows with 1000px width still get two previews in a row.
(making the text shorter would also be an option here)
This makes the container fit the content, otherwise we'd be cutting
off the "> quack &" part of the first line.
Also while we're here increase the line-height a bit to give it more
breathing room, and increase the font size juuust a smidge.
Reduce margins and increase padding to make it less cramped.
Some GPG options work only with private keys but our completions suggest all
keys. Modify `__fish_complete_gpg_user_id and __fish_complete_gpg_key_id`
to take an optional argument for the "key type" to override `--list-keys`
with like `--list-secret-keys` for the appropriate options.
Closes#8712
Helm 3 provides an autogenerated completion since version 3.4.0.
The previous implementation is replaced by this because it was specific to the
now-deprecated helm 2.
The completions appear to be fully featured including descriptions and
completion for dynamic arguments such as namespaces and releases.
Their names are not perfect, so let's keep them as internal functions,
until we figure out how/if we want to expose this.
This reverts 0445126c2 (Undunder __fish_is_nth_token, 2021-06-29) (but I
did it without "git revert").
Closes#8008
This patch adds completions for the values of properties, emitted once the
current token matches the name of a zfs property in full, for the various places
where such a property can be assigned.
e.g.
zfs set canmoun<TAB> continues to only provide "canmount" as a completion, but
zfs set canmount<TAB> will provide a list of all valid values for the property.
The existing code made an attempt to complete the values for the specific case
of `zfs set PROP=` but I could never get it to work for me under FreeBSD, so I
presume it was Linux-specific. This patch should be cross-platform and extends
the completions to anywhere where a property may be set.
The previous behavior vs the current (hopefully ideal) behavior:
* zpool attach [lists pools and devices - should list only pools]
* zpool attach tank [lists pools and devices - should list only devices already
part of pool "tank"]
* zpool attach tank da1 [lists pools and devices - should list only devices not
already part of pool "tank" or any pool, depending on -f flag to attach]
Completions may benefit from using these in tandem to dynamically generate
completions predicated on the value of an earlier token in a cleaner fashion.
(Currently, most of called completion helper functions introspect the command
line to get the value of an earlier argument, making them less reusable for
different expressions that need completions of the same type. This way, the
completion can provide the function with the argument value explicitly.)
As of FreeBSD 13 (released April 2021), FreeBSD has rebased its zfs support on
top of the OpenZFS distribution previously used only/chiefly by Linux;
accordingly, it has gained support for some previously Linux-only completions.
This patch changes some completions previously predicated on a Linux ZFS
installation to the presence of an OpenZFS installation. Note that there
continue to be (and probably always will be) separate Linux-only and
FreeBSD-only completions (and not just when it comes to interacting with the
device subsystem, etc).
Cursory experiments reveal that there are only three color options where
the background color is not ignored (though I didn't check all of them).
For these three options, the foreground color is ignored. Similar for
bold/italics/underline.
Teach set completions to only show the colors that won't be ignored.
Unrelated observation: we write
-a '--background=(set_color --print-colors)'
instead of
-l background -a '(set_color --print-colors)'
because we want all colors to show straight away (there are no other
meaningful arguments).
4b018a760 (set completions: add more special variables, fix colors, 2021-12-13)
changed a global variable to a local, which is no longer visible to this
function. Fix this, so "set LANG <TAB>" works again.
We detect one terminal (foot) with a "string match" command, and all others in a long "test"
command. Let's put the detection of each terminal on a new line. This should be easier to read
and change. It also allows to lose one level of indentation.
This takes the changes from 03b23dd1b6
and applies them to the .theme version as well.
(note: It's *possible* to just go through fish_config in future, but
we do not want to do that right now because that can have issues on
upgrade)
This was an undocumented undunderscored function that wouldn't be
super useful to actually use manually (because it still checked if the
variable was set!). It also relied on `__init_uvar`, which was only
set in `__fish_config_interactive`.
Additionally it didn't remove any complexity because this was all very
simple "do thing a, do thing b, do thing c" stuff. It added a layer of
indirection instead, and made fish startup dependent on another
function.
If you want to reset your colorscheme to the default, use fish_config.
Add completions that are correct on darwin and probably bsd.
Add missing -H, -L, -P completions to GNU chown.
Remove errant GNU completion claiming -h is short for --help.
The regex for task names was a bit off, so
- include uppercase letters, to support `TMessagesProj:assembleMiniRelease`
- don't include characters like `[]` (which happen to lie between ASCII `A` and `z`)
- include numbers, which are presumably valid in an identifier
- explicitly include the optional ` - ` bit in the regex
- Use named colors instead of hex values - not sure how this
happened in the first place, these all map to basic named colors.
- Reinitialize if these were last set on fish <3.4, new variables
have been added.
- Break this into a separate function for the sake of
__fish_config_interactive complexity, and allow for running
manually.
Remove some nonexistent options (my gcc does not know "-mdata"), fix
the longest description in all of fish and remove some argument
markers from the option.
This sets the variable to the background value of
$fish_color_search_match, which fixes the case where you switch from a
theme with a set selected background (like our default, now) to one without.
It's using GNU specific flags, which doesn't work on BSDs like macOS.
Instead this just formats the current time into
seconds and then the `math` builtin for calculating the 5 min timeout.
Unfortunately the normal font families like "sans-serif" and
"monospace" are basically broken because the browser defaults are
decades old.
TODO: Inline code is barely distinguishable.
GNU tr is not Unicode-aware, and was corrupting descriptions that had
non-ASCII characters.
Additionally, rather than using the Unicode private use characters, use
the ASCII/UTF-8 record separator character as it was intended.
The sed command could probably be rewritten to do all the heavy lifting
here, but would be even less readable.
Closes#8575.
Instead of weirdly smearing the color, simply increase the values
until they are bright enough.
This prevents /tmp from being white, and guarantees visible colors for
all directories.
fish_git_prompt may run certain git commands which may invoke certain
external programs as specified `.git/config`. Prevent this by suppressing
certain git config options.
The `name` attribute I used in commit f725cd402d
is undocumented, and [someone discovered] that it does not exist for one
possible browser on MacOS. This should make the code work correctly even in that case.
This probably doesn't currently cause a problem, at least when
`isMacOS10_12_5_OrLater()` is true, because of the ordering of the if
statements in the `runThing` function.
[someone discovered]: https://bugs.python.org/issue43424#msg409087
Git completions use wrapper function __fish_git instead of directly
running git. This allows them to be aware of Git's global options, like
--git-dir. Let's use __fish_git also for listing config keys & values,
so it can more accurately list local (= per repo) git configuration.
We don't provide completions on "git config " because we require
"fish_is_nth_token 3". Confusingly, fish_is_nth_token only counts
tokens *before* the cursor, so 2 is the right number here.
While at it, fix a typo and delete an unused completion entry (it
ran conditional on __fish_is_first_arg, which is always false for a
git subcommand).
This patch introduces basic completion of the -pl|--projects switch for
mvn. The implementation is quite naive but it's better than nothing. A more
robust implementation would require either scanning the filesystem or running
mvn which might slow down completion significantly.
This solution can be improved by using an XML parser instead of grep/sed.
This is a stop gap. Ideally setting a theme would be idempotent. You
set it, all colors change to match it, even the ones it does not
specify.
However, I do not believe we can *erase* colors that aren't set, and
we don't currently do so in the CLI version. So skip setting these at
all, for now.
If a color is mentioned but empty, it will be set to empty.
If the theme says "brgreen", that's what we want the variable to say
after.
This used to translate it through our palette, so it ended up as
00ff00, which isn't the same.
This still keeps the idea that colors that aren't in the palette are
better, and it does it in a slightly roundabout way (translate color
string to rgb string, see if the rgb string is a key in that
translation dictionary), but it should work for now.
* add --bold, --italics, all of them,
* and we add them as arguments so that they are do not
render like long options, they are just self-descriptive
literal strings in this context.
* solve an unneccessary global var.
Fixes#8518
Theoretically if this only includes simple characters, it won't cause
any issues. We already validate in other places but it doesn't hurt to
do this twice.
Now that we have modifiers and can have backgrounds and such, simply
setting it as css style doesn't cut it.
So let's stop validating for now, the worst that can happen is that
the color isn't rendered.
This just simply passed the "color" value, which is just the
foreground color string.
Instead, we pass the actual object back, with the modifiers as bools
and foreground/background separate.
Our themes don't use background a lot, except in the pager, so this
never really came up.
Use the remaining_to_disclose count to determine if all completions
are shown (allows consistent behavior between short and long completion
lists).
Closes#8485
Cargo subcommand extensions don't provide a description in `cargo --list`,
the regex used to filter this list ignored lines without a description.
This change fixes that.
A completion entry like «complete -a '\\~'» results in completions
that insert \~ into the command line. However we usually want to
insert ~, but there is no way to do that.
There are a couple of longstanding issues about completion escaping
[1]. Until we fix those in a general way, fix the common case by
never escaping tildes when applying custom completions to the command
line. This is a hack but will probably work out fine because we don't
expect literal tildes in arguments.
The tilde is included in completions for cdh, or
__fish_complete_suffix, which simply forwards results from "complete
-C". Revert a workaround to cdh that expanded ~, because we can now
render that without escaping.
Closes#4570, #8441
[ja: tweak patch and commit message]
[1]: https://github.com/fish-shell/fish-shell/pull/8441#discussion_r748803338
* Rename pabcnetcclear complete
* Code clean-up
* Debug values support
* Change /Debug description
* Standardize help
* Use single quotes for --arguments
We only need the curses module to look up sgr0, bold and underline
sequences.
Since those are going to be the xterm versions 90% of the time, we can
simply use those if this fails.
Fixes#8487.
* Add findstr completion
* Standardize completion
* Show completion only on Windows
* Use single quotes where possible
* Remove quotes where possible
* Remove OS check
* Use single quotes for --arguments
This looked at __fish_print_commands, which goes via our man pages to
find the commands (it shouldn't, buuut), and exludes a hard-coded list
of pages.
So we do two thigns:
1. We add the other doc pages to the list
2. We check commands *later* - if we listed something explicitly it
should be used
This was "--authoritative" (and unauthoritative). It was meant to make
fish mark everything that couldn't be generated via the completions as
an error, it was removed years ago and has been a no-op since then.
This behavior matches the way completions are found for `cargo run`,
`cargo test`, etc., and is more robust and correct compared to looking
at filenames.
This was supposed to act like `type -q` or `command -q`, in that it
returns 0 if at least 1 exists.
But because it used the wrong variable it didn't.
Fixes#8431.
Foot has several terminfos:
* foot - the default one
* foot-direct - 24-bit color terminfo, similar to xterm-direct (used by e.g. emacs)
* foot-extra - alternative to the ncurses provided terminfo, with a couple of extra, non-standard
capabilities
* foot-extra-direct - 24-bit color version of the above
There may also be other distro-custom terminfo names (serving the same purpose as foot-extra*)
Otherwise, with a light-theme, the selected entry uses black text with
"bright black" background, which can be low contrast thus hard to read.
The description background is different, maybe we can fix that later.
See #8376
This is nroff/groff being broken. It turns "→" into "â". This is even if we select `-Tutf8` and friends.
So, if mandoc exists, we prefer that, and otherwise, run preconv on
the file first (if it exists).
Really, what we would need to to is tell nroff to pass `-KUTF-8` to
groff, but that doesn't appear to be possible.
- Introduce BUILTIN_ERR_COMBO2_EXCLUSIVE
- Distill generally more terse, unambiguous error descriptions.
Remember English is not everyone's language.
- Do not capitalize sentence fragments
- Use the modality where problem input is in a %s: prefix, then
is explained.
- Do not address the user (the "You cannot do ..." kraderism)
- Spell out 'arguments' rather than 'args' for consistency
- Mention 'function' as a scope
This basically disables syntax highlighting. That doesn't mean we use
absolutely no colors - the search match, suggestion, selection and the
pager have coloring, but only reverse or brblack.
The idea is that this disables anything that tells you about
the *syntax*, but it still tells you about the state of the
commandline. If we didn't highlight the selection it would be entirely
invisible, and if we didn't highlight the suggestion you would have no
idea where it begins.
So this basically brings colors on-par with bash, where the search
match is colored (in reverse) and suggestions aren't a thing.
An alternative is to add a $fish_highlighting_enabled variable like
the one for suggestions. That's still possible, but would require some
internal changes to avoid coloring some things with $fish_color_normal
and other things with the normal terminal color.
One thing this also does not do is set the git prompt colors. These
are currently disallowed from being set in theme files because they
start with `__fish` instead of just `fish`. We should probably rename
them.
This program uses the Cobra framework for argument parsing and completion generation.
Just source the completions supplied by upstream.
This works around "go install" not being able to install completions files (only binaries).
Usually local branches have remote branches with the same name, and in
completion they are currently overshadowed by unique remote branches, making
local branches hard to find. Define local branch completion after unique
remote branch completion to show local branches before unique remote branches.
If $xdg_chache_home is empty, this is not a valid fish expression:
[ \( -z \) -o \( ! -d \) ]
and results into an error.
While at it, also use $XDG_CACHE_HOME if that directory does not exist.
This seems better than falling back to $HOME/.cache, which the user has
explicitly overridden via $XDG_CACHE_HOME.
In 'simple terminal' the delete key prints \e[P by default, which is
related to the different approach the authors of st are taking on the
matter of shell configuration. The main problem is the malfunction of
the delete key, so we have to use a workaround like this.
Suggest files to "man -l", but only if the "-l" option is supported
(so not on BSD). Technically we should accept multiple files but this
seems good enough.
Also suggest files when the token-at-cursor contains a slash, because
man will treat arguments as file paths if they contain a /.
git-status --porcelain prints status letter T when a file changed type
between either regular file, symlink or submodule. It can occur in
exactly the same cases as M (modified), so extend the fix for #8311
accordingly.
For submodules, our completions are probably not always correct,
hopefully those cases are rare.
This is weirdly undocumented (as of git 2.33.0), but `git status` prints a "T" state if
the file has its "T"ype changed, e.g. from a regular file to a symlink.
For our purposes that's just another kind of modification.
Fixes#8311.
* Hide whatis database building from the user
It's really an internal detail, but shows up in prompts that display how many
background jobs are running.
By disowning it keeps running but won't show up in `jobs` or get killed if the user
exits the shell.
* Update __fish_apropos.fish
The less -F / --quit-if-one-screen option is buggy before v530. To work
around this, pass --no-init less versions older than 530.
The --no-init option was previously passed; it was removed in d15a51897d
for mouse support. Unfortunately it looks like we can't have mouse
support and --quit-if-one-screen on macOS shipped less (version 487).
It's worth fixing this because otherwise history and help is just not
printed on stock macOS.
Relevant is https://unix.stackexchange.com/questions/107315/less-quit-if-one-screen-without-no-initFixes#8157.
Commit c3374ffd0 ("Use read --tokenize instead of eval for $BROWSER &
$EDITOR") converted uses of "eval" for environment variables to use the
safer "read -at", which performs word splitting but no other expansion.
funced contained a leftover instance of "eval". Remove it in favor
of using the editor command that was already word-split.
This means that we don't accidentally evaluate the file name.
(Also "set -gx EDITOR=~/my-editor" won't work anymore because the ~
is not expanded anymore but no one has complained about that behavior
in edit_command_buffer.)
Fixes#8289
*Problem:*
edit_command_buffer uses `cat` to return the modified content.
If a person has an alias for `cat` to a different command such `bat`** the editing will not be useful anymore since bat decorates the text with frames, line counts, etc
*Solution*
Appending command to cat, fish will ignore the alias and execute the real command according to this https://fishshell.com/docs/current/cmds/command.html
** https://github.com/sharkdp/bat
* Fix ls.fish: add -l option to GNU ls
* Sort alphabetically and remove --lcontext and --scontext (what are these?) on shared and GNU part.
* Revert --lcontext and --scontext options.
This should add all the sections that aren't linked internally,
including "identifiers".
(also give up on the line breaking because it makes it annoying to do
automatically)
Fixes#8245.
This was semi-automated with
```fish
for file in $argv
set -l varname (string replace -r '.*/(.*).html' '$1' -- $file | string escape --style=var)pages
set -l sections (string replace -rf '.*class="headerlink" href="#([^"]*)".*' '$1' <$file)
echo set -l $varname $sections
end
```
(where $argv contains the path to faq, fish_for_bash_users,
interactive, language and tutorial.html)
Building help.fish at compile time would work, but only for users who
build the docs.
The same hack that is used for `pkg remove <foo>` is required here, too.
Due to the massive number of results, we use `head -n 250` to prevent
the completion from hanging or the shell from being overencumbered by
too many possibe completions. However, this would only generate matches
for any of the first 250 packages, rather than printing the first 250
packages that match.
[ci skip]
As functions know where they are loaded from now, there is no point in
them being marked as loaded from a temporary file that has been removed.
Source the function via a redirect instead.
support for ping from iputils (version 20210202)
support for ping from inetutils (version 2.1)
support for ping from busybox (version 1.33.1)
support for ping from FreeBSD and macOS (by @juntuu)
Ubuntu's fish package on WSL 1 has xsel as recommended dependency,
even though there is no X server available. This change makes us
use Windows' native clipboard even when xsel is installed.
We keep __fish_is_nth_token for compatibility and edit the
implementations of __fish_is_nth_token, __fish_is_first_token and
__fish_is_token_n to use fish_is_nth_token
Using `complete -F -c git -n __fish_git_needs_subcommand -a $command -d
$description` causes file completions to be forced on entire git command
which is not a desired result. Morever without the `-F` flag file
completions work just as expected and is useless addition
This injected filenames into fish script, which could inject things
that looked like fish script.
E.g. create a file called `~/.config/fish/themes/"; rm -rf ~/*"`.
Note that the prompts are all shipped by us, but the themes can
technically be added by the user, and they might not be dilligent in
what filenames they allow.
`fish_config theme`:
- `list` to list all available themes (files in the two theme
directories - either the web_config/themes one or
~/.config/fish/themes!)
- `show` to show select (or all) themes right in the terminal - this
starts another fish that reads the theme file and prints the sample
text, manually colored
- `choose` to load a theme *now*, setting the variables globally
- `save` to load a theme and save the variables universally
- `dump` to write the current theme in .theme format (to stdout)
- `demo` to display the current theme
In the variable handler, we just go through the entire thing and keep
every element once.
If there's a duplicate, we set it again, which calls the handler
again.
This takes a bit of time, to be paid on each startup. On my system,
with 100 already deduplicated elements, that's about 4ms (compared to
~17ms for adding them to $PATH).
It's also semantically more complicated - now this variable
specifically is deduplicated? Do we just want "unique" variables that
can't have duplicates?
However: This entirely removes the pathological case of appending to
$fish_user_paths in config.fish (which should be an FAQ entry!), and the implementation is quite simple.
* Add initial completion for Angular CLI
* Remove completion for `ng completion`
The `ng completion` doesn't exist. The completiond were autogenerated
using a script. See angular/angular-cli#21085
* Use shorter wording
* Fix typos
These are simple
var val [val val]
files. Basically the bit in `set -g fish_color_escape 86c1b9` after
the `set -g `. Since we're not going to `source` them, however,
arbitrary code and expansions are unsupported.
Also comments and such don't currently work.
This allows them to be easily readable both from webconfig (next
commit) and the shell (later).
This used to pass each color in a separate url-encoded request, which is
just wasteful.
Also it passed separate parameters for modifiers like bold and
underlined, but never gave them actual values. Instead the color is
passed as one string.
So we just use json, and then iterate over it server-side.
This introduces two functions to
- toggle a process prefix, used for adding "sudo"
- add a job suffix, used for adding "&| less"
Not sure if they are very useful; we'll see.
Closes#7905
I almost always use this on the last/only job in a commandline, so
the semicolon is usually not needed. We have always added it but I
prefer not dropping it: this feels cleaner because it's what you'd
type without the shortcut.
Similarly to b0e3cc4b5 (__fish_complete_suffix: Remove `eval`,
2019-12-28), this use of eval is unsafe and can spew errors if
invoked on an incomplete brace expansion.
Commit d15a51897 ("Rationalize $LESS uses") switched a "less" flag
from -r (interpret all control characters)
to -R (interpret only color codes)
Somehow this changed the output of "fish -c 'command -h'" to include
weird characters:
DESCRIPTION^O
command^O forces the shell to execute the program COMMANDNAME^O and ignore any functions or builtins with the same name.
Probably this was the reason why I originally used -r over -R. Anyway,
-R is safer and it looks like we can just remove the "ul" preprocessing
since "less" will interpret bold/underline just fine.
The `__fish_git_unique_remote_branches` function isn't applicable here
since `git describe` won't know what to do with a remote branch without
the remote prefix. For example, if there is a branch called
`origin/my-branch`, you can't execute `git describe my-branch` until the
branch is checked out locally. In other words:
Good: `git describe origin/my-branch`
Bad: `git describe my-branch`
Good: `git switch my-branch; git describe my-branch`
The completions for the `--example` option are generated using `find`.
The `find` utility on macOS will produce the following output when the
path argument has a trailing slash:
```
~/bat $ find ./examples/
./examples/
./examples//cat.rs
./examples//advanced.rs
./examples//simple.rs
./examples//list_syntaxes_and_themes.rs
./examples//yaml.rs
```
And will produce this output if the path does NOT have a trailing slash:
```
~/bat $ find ./examples
./examples
./examples/cat.rs
./examples/advanced.rs
./examples/simple.rs
./examples/list_syntaxes_and_themes.rs
./examples/yaml.rs
```
The extra slash after `examples` ends up in the completion suggestions
which is incorrect:
```
~/bat $ cargo run --example <TAB>
/advanced /cat /list_syntaxes_and_themes /simple /yaml
```
Unlike on my Linux box where `find` doesn't output the trailing slash:
```
~/bat $ cargo run --example <TAB>
advanced cat inputs list_syntaxes_and_themes simple yaml
```
Importantly, I get the same (correct) output on Linux even without the
trailing slash in the path argument to `find`.
This can give false positives but only if used on directories that
mix tracked and untracked files. The performance is better than
listing all tracked files, and in any case we're pretty far from a
correct solution that knows the target Git commit, so this seems like
good compromise.
The buttons were already supposed to highlight on hover, but the color
difference was barely visible. Crank that up.
Also add a hover color to the tabs, colorschemes, prompts, functions.
The big clickable things.
This made the current prompt appear directly under the tab,
disregarding the padding.
That means it looked inconsistent with the colors. (note there's still
less padding on the side, but at least that allows more actual content
- prompts are often fairly wide)
This has one slight behavioral change: Even with xsel, it now copies
to the clipboard, not the primary. I would imagine anyone who cares
about the primary selection has customized fish_clipboard_copy and
because we never got a bug about this not supporting anything but
xsel (and errorring out if it's not available!) this is probably
unused.
So now we support all the clipboard integration things, and we use the clipboard.
This change adds a binding that sets the s key's behaviour to match
the c key's in visual mode. This mirrors vim's behaviour (see `:h v_s`
in vim or neovim).
Apart from OpenBSD's "colorls" that is basically an ls that can do
color, there's also a ruby tool called "colorls" that's closer to exa.
Ignore that one since the options it understands are quite different
and I'm betting it's slower (given my experience with ruby tools).
See #8042.
* add support for colorized ls on openbsd
* add changelog line for colorls support
* add readme line for colorls support
* determine ls command at runtime, don't cache it
* eliminate __fish_ls_command function
Stop using "--no-init"/"-X" because we have no actual reason to and it
may break mouse initialization on my best friend macOS.
Use --RAW-CONTROL-CHARS, the capital version that only lets through
specific escape sequences, not *everything* - we shouldn't have
anything weird here, but less heavily discourages the other version.
Allow a user's $LESS to override.
Fixes#7997.
In such cases, `pacmd help` prints
No PulseAudio daemon running, or not running as session daemon.
to stderr, which ends up printed to the user terminal.
This isn't really a "locale" variable as such. It has no effect on
encoding and stuff, it's just the output language.
What we really want here is get something better than the awkward "C"
or "POSIX" for LC_CTYPE specifically - everything else doesn't really
matter.
Recently Safari seems to hang with fish webconfig. This is apparently
because Safari is opening a socket and not writing to it, causing
webconfig to hang until the timeout (30 seconds). It's not clear why.
Use ThreadingMixIn so that FishConfigTCPServer can handle more
than one connection at a time. This fixes the hang under Safari.
From my checks (gnome-terminal with the "gnome light" colorscheme)
this seems to be the only color that's barely visible in a light
terminal, and it's the only color mentioned in both bug reports.
I'm leaving the artistic decisions to others, this is now *acceptable*
in both.
Note that, because we use universal variables here (hint #7317), this
will only be changed for preexisting installations when the user
reloads the colorscheme.
Fixes#3412Fixes#3893
It's a bit weird to *have* to fire up a browser to get fish_config to
choose a prompt.
So this adds a `prompt` subcommand to `fish_config`:
- `fish_config prompt list` shows all the available prompt names
- `fish_config prompt show` demos the available sample prompts
- `fish_config prompt choose` sources a prompt
- `fish_config prompt save` makes the choice permanent
A bare `fish_config` or `fish_config browse` opens the web UI.
Part of #3625.
TODO: This shows the right prompt on a new line. Showing it in-line is awkward
to do because we'd have to move it to the right.
Because MacOS' apropos is bad and doesn't support the `--` option
separator, this apparently spews errors.
Because the argument _can't_ start with a `-` (because we add a `^`),
we can just remove it.
Fixes#7965.
This prints a description of the "host". Currently that's
`(chroot:debianchroot) $USER@$hostname`
with the chroot part when needed.
This also switches the default and terlar prompts to use it, the other
prompts have slightly different coloring or logic here.
These were hard to read in the browser, but not in the terminal.
The palette in color.cpp lists #000080 for blue, which is *even darker*. I'm not sure if that's actually a thing - I was under the impression that table was taken from xterm.
Either way, listing it in this color doesn't do anyone any favors. It's just a rough approximation anyway.
Otherwise this has filesystem order, which on my system is quite
chaotic.
An alternative would be to randomize the order so people see different
prompts each time.
Some features:
- A nice `►` prompt char with a fallback for non-utf8 systems
- The $PWD is colored depending on its sha, so different directories
are colored differently, but each directory stays the same
- User@Host is only shown if not on the local machine (ssh or
virtualization)
- A right prompt with a nice git display, date, duration of the last
command (if it took over 100ms), and virtualenv
This gets fish to print the right prompt of any sample if it has any,
and then shows it separately.
If there is a right prompt, it will also save it. If not, it will *not* overwrite an existing right prompt.
This called `uname` just to check if we *should* shorten "cygdrive"
directories.
That's more annoying than just doing it by default - on my system `pwd
| string replace` takes about 100 *micro*seconds, and this is done
once per prompt. Anyway, using $PWD further speeds it up to ~30
microseconds (compared to 10-20 for just `pwd`). This is hard to
measure because it's heavily impacted by system hitter.
The alternative is to ask cygwin to ship this feature as a patch.
Complete RPM files instead of pacakges if there is either
1. a slash in the token, which precludes package names
2. no matching package
To enable 2, pass the commandline token to the dnf query, instead of
an undefined variable. This allows SQL injection; not sure if we care.
We could always complete RPM files but maybe that's too noisy.
Also, isn't that what the "rpm" command is for?
Closes#7928
Fixes#7926.
Also switches the default status order for non-informative to the informative one:
stagedstate invalidstate dirtystate untrackedfiles stashstate
instead of
dirty staged stash untracked
This should be a simple prompt that doesn't place a huge strain on the
system but communicates the most important information simply and
effectively.
It should be a good jumping off point for making your own prompt.
Unless that person directly contributed the prompt.
We name them after a feature - the Scales prompt feature a ">>>" which
kinda looks like fish scales, the "Arrow" prompt starts with a
prominent "➜".
Naming them after people looks like an endorsement of that particular
person, and like they are someone to look up to, especially when they
aren't involved with the project.
The "terlar" and "acidhub" prompts stay for now because they
contributed the prompt themselves, they are also much less prominent.
The "classic" prompts are all just variations on a theme, let's just
keep the default classic+vcs.
"Justadollar" is very unlikely to be what you want and also trivial to
write yourself.
I have no idea what screen_savvy even is for - it reacts to "$WINDOW",
but I don't know anything that even uses that variable.
Lonetwin is just unremarkable, and the debian chroot prompt has one special feature that should be integrated into the other prompts.
Because macOS' `apropos` is just using grep, and we only need
a prefix match for __fish_describe_command, we can shave off
some ok total execution time here.
No longer uses the __fish_apropos hack on every version of macOS.
Juat Catalina+.
The whatis database generated and replaced daily is 2 megabytes on
my computer, and in ~/.cache on a home dir might wind up on a net
mount or something annoying. or, definitely it's backed up by default.
It's wiser to throw that junk in with other cache files on the system
aka DARWIN_USER_CACHE_DIR, and only use the XDG directory if
someone specifically configured that.
Mainly, this just means at least it won't automatically get backed
up by Time Machine and stuff every day, which is no big deal but
y'know...
Rearranged stuff a little to not shell out every time.
The default vi mode prompt is kind of ugly, mostly because we include
this `[I]` with a super bright green background and white text,
which is particularly grating because most prompts don't actually have
a background.
So we get a ton of people asking "How do I remove this [I]" when they
could really benefit from having the mode shown.
There's a few ways to make this look nicer, the simplest is to just
keep the same colors but use them as foreground instead of background
colors, which looks much more understated.
The mode prompt is important, but not more than the actual contents of
the commandline, so it shouldn't have ALARMING colors.
This allows us to stop descending into untracked directories, which
can be faster.
It's still not *good* - git can still be quite slow here, but if
there's an untracked directory you probably don't care about the
number of files in that.
Fixes#7871.
This is all of the sections in interactive, language and for_bash_users.
The faq names are so long that we're not adding them, also not all of
these have descriptions yet.
Given that we no longer have that massive "index" page with
everything, it's become harder to open the correct section
immediately.
So this hardcodes the section titles for each page in help itself.
This was half-automated with
grep -o 'a class="headerlink" href="#[^"]*"' /usr/share/doc/fish/faq.html | sort -u | string replace -r '.*#' '' | string trim -c '"'
The completions still need to be adjusted.
In vim p means paste *after* current character, so go forward a char before pasting.
Also in vim, P means paste *at* current position (like at '|' with cursor = line),
so there's no need to go back a char, just paste it without moving.
Prior to this commit "builtin -h" would silently fail when no
documentation is installed. This happens when running fish without
installing it, or when the docs are not installed.
See #7824
After a fish installation is upgraded to 3.2.0, active shells could
throw an error attempting to load Git completions. It's just a
transient error but also easily avoidable by using the old style.
See #7822
Previously, this message told the user to "set $BROWSER and try again". However,
when I first saw this error, I didn't know how I can set `BROWSER` in fish. Moreover,
I often see this error in situations when no browser will work. For instance, I might be
using fish over ssh, and I might either not know whether that system has a text-mode
browser installed or not want to use it.
A further improvement would be to report this message if a browser fails to start.
This actually *worked* in my tests which confuses me.
It really shouldn't, `apropos -foo` will complain about "-o" not being
a valid option.
It should be `apropos -- -foo`.
Now, of course there are awful apropos implementations, so let's see
if someone complains
When `fish` is running in the Chrome OS Linux VM (Crostini),
both `help` and `fish_config` opened a "file not found"
page. That is because on Crostini, `BROWSER` is usually set to
`garcon-url-handler`, which opens URLs in the host OS Chrome
browser. That browser lacks access to the Linux file system.
This commit fixes these commands. `help` now opens the URL on
www.fishshell.com. `fish_config` now opens the URL for the
server it starts. Previously, it opened a local file that
redirects to the same URL.
In the case of `help`, the situation could be improved further
by starting a web server to serve help. I don't know of another
way to access `/share/fish` from outside the VM without user
intervention, and I think that might be a part of the security
model for the Crostini VM.
It's hard to write a test for this. I checked that `help math`,
`python2 webconfig.py`, and `python3 webconfig.py` work on my
machine running in Crostini.
This was a handler for various prompt variables that called a repaint.
Unfortunately, if you set one of those *inside* the prompt (a logical
place for it), this would lead to something like #7775.
So, because this isn't actually *useful* as far as I can see (how do
you set these variables in a way that you're not already inside a
prompt or about to draw a prompt? in a key binding?), we remove it,
like we removed the repaint from git's variable handlers.
This `set -e` had a cartesian product that caused it to remove the
indexes separately, so the later indexes were off - removing the first
and then the second ends up removing the first and then the
old-*third* which is now the second.
Just quote the expansion so it runs in one go.
Fixes#7776
Because we removed repaint coalescing, currently setting any of the
git prompt variables in fish_prompt leads to a repaint loop (that
presumably aborts once it reaches the recursion limit).
Since repainting on these variables isn't really useful (when you
`set` them interactively you already get a new prompt), just remove
it.
There's two cases this "breaks":
- When you set a variable *after* the call to fish_git_prompt
- When you set a variable via a binding
In both of these it's not too much to expect an explicit "commandline
-f repaint", especially since for bindings that's already needed in
most cases, and setting a variable after using it isn't normal.
Fixes#7775.
Called as
__fish_print_pipestatus "[foo" "oof]" "|" (set_color green) (set_color --bold blue) 0 1 2
it would make the closing `oof]` bold green.
Fixes#7771.
* Ensure web_config works on WSL
web_config could sometimes fail on WSL if the user chose not to append
windows directories to their linux $PATH. This change ensures that the
cmd.exe executable is found in most cases even if windows directories
are not appended to $PATH on linux.
An error message letting the user know that cmd.exe was not found, and
that they should add the cmd.exe dir to their $PATH before running
fish_config is displayed if cmd.exe is still not found.
* Exit with a non 0 status code if cmd.exe is not found
In this context, as it stands, $last_pid will give fish's pid (because
of pgroup shenanigans).
Since that doesn't really work, just `disown` without and let fish
figure out what the last process was.
Theoretically this has an issue if someone started a background
process *before* the python script *and* that exits before we run
disown.
That's a vanishingly small window and this is only run on first start,
so it seems acceptable.
Fixes#7739.
This still showed the background gradient, which is just a waste and
looks weird.
Instead make the actual content fullscreen (except for the border
radius, for now)
When pasting a multiline command with indented blocks, extra indentation
from spaces, or tabs, is generally undesirable, because fish already indents
pipes and blocks. Discard the indentation unless the cursor or the pasted
part is inside quotes.
Users who copied fish_clipboard_paste need to update it because
__fish_commandline_is_singlequoted had an API change and was renamed.
I ran into problems described in https://github.com/fish-shell/fish-shell/issues/718 when using this prompt. This seems to be a bug in the prompt -- this change fixes it, at least on my system.
I tried this in tmux (TERM=screen) and gnome-terminal (TERM=xterm-256) with fish 3.1.2, on Linux.
__fish_print_commands just prints the commands we have man pages for,
and help uses that to figure out whether it should link
a command or a section. If the docs aren't installed it won't find
anything.
At least check the builtins, because we document them and it's easy.
This probably needs to be added at build time - glob
doc_src/cmds/*.rst.
Some third party Git tools provide a man page, which we can at least use
for completing options.
The old logic excluded all generated completions for Git subcommands.
Instead, try to load completions for all available external subcommands.
We can use $PATH/git-* because /bin/git-add and friends were removed in Git
1.6.0 in 2008.
Closes#4358 (the "git-foo" wrapping was added in #7652)
This was only a thing in cygwin, and only a workaround because
cygwin's hostname was broken in 2013 and our sample prompts called it,
which caused errors in fish_config.
Our sample prompts no longer call `hostname` at all (they use
`prompt_hostname`, which uses the variable), and it's possible
cygwin's hostname was fixed in the meantime.
Fixes#7669.
* completions/userdbctl: init
userdbctl:
Show user and group information.
A part of systemd.
* completions/userdbctl: fix complete services
Complete the services at the completion time.
This goes to a separate file because that makes option parsing easier
and allows profiling both at the same time.
The "normal" profile now contains only the profile data of the actual
run, which is much more useful - you can now profile a function by
running
fish -C 'source /path/to/thing' --profile /tmp/thefunction.prof -c 'thefunction'
and won't need to filter out extraneous information.
We were soucing it manually, and implicitly via the `complete -C "git-foo "`
wrapper. Always use the latter, so fish knows that the completion is already
loaded.
This had a classic float:left layout, which led to awkward gaps and
stuff.
Since what we want here is basically 100% exactly a flexbox, just use that.
Note: No flexbox for the prompts, atm, because having multiple of
those next to each other looks a bit weird.
Since #7075, git-foo.fish files are sourced when Git completions are loaded.
However, at least Cobra (CLI framework for Go) provides completions like
complete git-foo ...
This means that completions are only offered when typing "git-foo <TAB>"
and not on "git foo <TAB>". Fix this by forwarding the completion requests.
Take care to only forward if there are actually completions for "git-foo",
to avoid adding filename completions.
Over in https://github.com/wez/wezterm/issues/115#issuecomment-765869705 one of my users noted that fish had automatic OSC 7, but that it wasn't enabled under WezTerm.
You can detect WezTerm through the `$TERM_PROGRAM` environment. In practical terms, all versions of wezterm in the wild support OSC 7 so a version check is not needed.
I'm not a fish user myself, but I did give the equivalent change to this a try on my Fedora 33 machine (it has an older version of fish).
I can see in this file that there's some stuff with `__fish_enable_focus` that you may also want to enable under wezterm; the escape sequence is supported as are panes, tabs and windows.
* Include completion for all pkg alias subcommands
* Formatting and dynamic evaluation of alias subcommands
* only set package_name completion once
* fixed syntax error
