Add a helper function to check if the user is root. This function can be
useful for the prompts for example. Modify the prompts made root checked
to use the function instead. Add also the support of Administrator like
a root user.
Fixes: #7031
I really kinda hate how insistent clang-format is to have line
breaks *IFF THE LINE IS TOO LONG*.
Like... lemme just add a break if it looks better, will you?
But it is the style at this time, so we shall tie an onion to our
belt.
* Fix manpath handling in create_manpage_completions.py
...as well as do some (very!) light cleanup.
Currently, `create_manpage_completions.py` does not properly
understand/respect the `$MANPATH` variable. One important feature of
`$MANPATH` is that an empty component (i.e. the trailing : in
`foo:bar:`) expands to the 'default' or 'system' path -- that is to say,
the path that would be used if `$MANPATH` was unset. This allows the
user to extend the manpath without clobbering it, and has been a feature
many Unices have included for years.
The current implementation blindly uses the `$MANPATH` variable if it
exists, which does not allow for this behaviour -- to expand the
variable correctly, an external program must be invoked. Therefore, we
first shell out to the 'proper' (read: best guess) external program. If
that fails, we can then try to use `$MANPATH` directly/literally.
Finally, if both of those are impossible, we can fall back to some
common paths from widely used operating systems.
Note that the `man.conf` parsing has been removed: this is because while
many 'traditional' Unices (BSDs, Solaris, macOS) support this file, only
macOS actually ships a file -- most other Unices use a `conf.d`-style
layout and supporting that from our Python is impractical and silly at
best. On GNU (read: Linux) systems, `mandb` uses `/etc/man_db.conf` with
slightly different syntax and sematics. As this code-path has bitrotted
(and likely never worked, anyway), just remove it.
`create_manpage_completions.py` looks like it has suffered a lot of
confusion and bitrot in general over the last few years -- and is
overdue for a major refactoring. I am quite interested in tackling this,
but I plan to wait until the go-ahead to drop support for Python 2 is
given, as a major refactor/rewrite that still supports Python 2 (and
thus ignores the ergonomic/API/syntax improvements of Python 3) does not
make sense to me.
Related: #5657
It would probably be good to revisit `man.fish` once again when a
comprehensive refactor happens: hopefully every permutation of
`man`/`$MANPATH` could be documented as part of that effort.
* Restore /etc/man.conf parsing
I was not aware that this codepath was used -- since it appeared that it
would throw an error when it was reached. Redo it, using regex, and
support parsing NetBSD man.conf as well (untested).
* Fix create_manpage_completions.py under Python 2
I kinda hate how fussy clang-format is. It reflows text
constantly (line limit), forces things onto one line *except* when
they're too long, and wants to turn this:
```c++
return true;;
```
into this:
```c++
return true;
;
```
instead of, you know, eliminating the second semicolon?
Anyway, it is what it is and we use it, I'll just look into getting some
more slack.
The default indicator ruined alignment, which is a major design
feature here.
Handle it by including the mode indicator in the prompt proper.
Fixes#6802.
[ci skip]
Mostly line breaks, one instance of tabs!
For some reason clang-format insists on two spaces before a same-line comment?
(I continue to be unimpressed with super-strict line length limits,
but I continue to believe in automatic styling, so it is what it is)
[ci skip]
6902459566 was an attempt to not print
$status twice in the prompt. As a result we print $pipestatus but
not $status, which /usually/ is the same as $pipestatus[-1] --- unless
the builtin "not" is used, which inverts the $status of a job (it does
not alter $pipestatus).
As a result, the default prompt prints unexpected status codes:
~ > not false
~ [1]> not true
~ > not true | true
~ > not false | false
~ [1|1]>
This commit reintroduces printing of $status after $pipestatus, but only
if it is different from $pipestatus[-1].
Additionally, we only print anything at all if the $status is nonzero,
to avoid confusing output on `not false | false`
~ > not false
~ > not true
~ [0] 1> not true | true
~ [0|0] 1> not false | false
~ >
I think this is closer to users' expectations for those cases; they should
not have to think about this implementation detail of the not-statement.
OpenBSD uses [unveil(2)](https://man.openbsd.org/unveil) in chromium and
firefox. This means that things outside of directories like ~/Downloads or /tmp are not visible to the
browsers.
Change webconfig so it uses tempfile.NamedTemporaryFile to create our temp file.
It's now good enough to do so.
We don't allow grid-alignment:
```fish
complete -c foo -s b -l barnanana -a '(something)'
complete -c foo -s z -a '(something)'
```
becomes
```fish
complete -c foo -s b -l barnanana -a '(something)'
complete -c foo -s z -a '(something)'
```
It's just more trouble than it is worth.
The one part I'd change:
We align and/or'd parts of an if-condition with the in-block code:
```fish
if true
and false
dosomething
end
```
becomes
```fish
if true
and false
dosomething
end
```
but it's not used terribly much and if we ever fix it we can just
reindent.
This removes a call to `sed` and allows the user to specify shortening
via the variable.
We still default to disabling shortening because this prompt never
did.
[ci skip]
This is part of our (well, my) quest to spice up the default prompt.
In this case we color the host if $SSH_TTY is set, which is easy to
detect and helps draw attention to the host.
See #6398.
See #6375.
This was mostly dead, since $fish_color_host is set to normal in
__fish_config_interactive. The assignment was only used if the user
explicitly unsets fish_color_host (which they shouldn't, really).
Anyway it's weird to use cyan, use normal instead.
[ci skip]
The colors are set in __fish_config_interactive before the prompt is
painted for the first time.
Also initialize the $fish_color_status for the (pipe) status, bump the
version for that.
[ci skip]
If a command fails, print the pipestatus in red instead of yellow and
don't print the status of the last process again. See #6375.
Also use $fish_color_status for coloring status consistently.
Also use __fish_pipestatus_with_signal to print SIGPIPE instead
of a numeric code on e.g.: yes | less +q
[ci skip]
- Don't use a guard uvar - we're only setting variables now, and
- that's basically free.
- Allow non-universal color variables
- Simplify the root color setting a bit.
- Some comments
[ci skip]
This mostly fixes some wrong indents or replaces some stray tab indents.
I excluded alignment on purpose, because we have a whole bunch of code
that goes like
```fish
complete -c foo -n 'some-condition' -l someoption
complete -c foo -n 'some-longer-condition' -l someotheroption
```
and changing it seems like a larger thing and would include more
thrashing.
See #3622.
Changes identity `is` for equality `==` check. To remove python warnings when updating auto complete
```
/usr/local/Cellar/fish/3.0.2/share/fish/tools/deroff.py:770: SyntaxWarning: "is" with a literal. Did you mean "=="?
if len(comps) is 2:
/usr/local/Cellar/fish/3.0.2/share/fish/tools/deroff.py:954: SyntaxWarning: "is" with a literal. Did you mean "=="?
if len(comps) is 2:
Parsing man pages and writing completions to /Users/james/.local/share/fish/generated_completions/
6155 / 6155 : zic.8
```
Since the url is inside a AngularJS markup {{url}}, it's better to use **ng-href**.
From [AngularJS Documentation](https://docs.angularjs.org/api/ng/directive/ngHref):
<br>
"Using AngularJS markup like {{hash}} in an href attribute will make the link go to the wrong URL if the user clicks it before AngularJS has a chance to replace the {{hash}} markup with its value. Until AngularJS replaces the markup the link will be broken and will most likely return a 404 error. The ngHref directive solves this problem."
This runs build_tools/style.fish, which runs clang-format on C++, fish_indent on fish and (new) black on python.
If anything is wrong with the formatting, we should fix the tools, but automated formatting is worth it.
No longer uses global vars to cache set_color output, this was
from before set_color was a builtin, it is pointless now.
This is also a prompt from before we had bright named colors,
and it appears it was relying on -o red to get bright red.
so use brred, etc.
This exposes it more, since it's quite an important function.
We should do the same with the other vcs functions.
We leave a compatibility shim in place for now.
Some $TERMs like tmux and linux use an sgr0 ("reset") value that ends
in \co instead of "m". We need to adjust our regex here to catch that,
or we'd miscount lines with it.
This broke when --preset was introduced.
We allow a "--preset" or "--user" to appear right after the "bind",
and save the value, but don't use it yet.
Fixes#5534.
[ci skip]
Starting with Fedora 30 and RHEL 8, ambiguous python shebangs will now
throw errors during the RPM build process instead of just warnings,
since these systems have moved to Python 3 by default, and Python 2 may
not be available in the future.
See [this
page](https://fedoraproject.org/wiki/Changes/Make_ambiguous_python_shebangs_error)
for more details.
Drop these shebangs as the scripts are only ever called from fish
wrappers.
* Severely extended the sorin theme
This theme should now mostly match the original.
* Removed superfluous whitespace
* Inlined external links as ASCII art
* Made myself the author of the sorin theme
* Removed superfluous read delemiter
* Renamed __fish_git_action to fish_print_git_action
* Adde a minor comment
The solarized themes now define pager colors, while other schemes
don't.
So if a user picks one of them, and then another, they'd keep the
pager colors.
Instead, since the default theme is now complete, any theme that does
not define its own pager colors will always get the default ones.
[ci skip]
This was missing a bunch of variables from __fish_config_interactive.
Ideally we wouldn't have to duplicate this info, but I don't have a
great solution either.
This removes ~140ms from every single prompt.
When not in a git repo, this prompt now takes ~9ms, as opposed to
~150ms before.
Fixes#5266 harder.
[ci skip]
This is quite ugly, but in lieu of putting in a proper ansi
parser (i.e. the output part of a terminal), since this is the only
such sequence we have seen until now, let's just match it.
Fixes#5312.
[ci skip]
- Remove use of `eval`
- Use `git rev-parse` instead of `git status` as its faster,
- especially in large repos. (in qt5: 600ms vs 1ms)
- Use return status instead of test -n
This should change nothing about the output.
This uses some more string, but the main improvement is using "git
rev-list" instead of parsing "git branch" output that happens to be localized.
[ci skip]
I can't see the value in this, given that we have a bunch of minimalist ones.
The "escaping" here is gnarly enough that I don't want to attempt to clean it up.
This adds the color variables from the docs to both the python script
and the js controller.
Among others, this includes "search_match", i.e.
"fish_color_search_match".
It still does not include the pager colors because the variable names
wouldn't match.
The Informative VCS sample prompt currently sets the `__fish_git_prompt_char_conflictedstate` variable which is unused.
It should instead set the `__fish_git_prompt_char_invalidstate` variable.
* update nim.fish sample prompt
- Use an helper function to wrap informations
- Add VIRTUAL_ENV infos, if any
- Add __fish_git_prompt, wrapped for the theme
- Add comments
- Remove ASCII failback symbols for tty
(no more useful for me, but if someone really needs it, just ask)
* fish.nim: test -n __fish_git_prompt
Launch `cmd.exe /c "start URL"` under WSL for both `fish_config` and
`help`. This works around #4299 but does not address the underlying
issue (#1132).
Before this change, if a command failed, this was indicated by the "$"
at the end of the prompt turning red.
With this change in place, if a command fails, the exit code of the
failing command is displayed in [square brackets].
Specifically closes#4313.
Not being as agressive in what we ignore/blacklist, but can be revisited
easily in the future to add more characters to the argument blacklist.
Haiku only has `man --path`.
Still doesn't support OpenBSD.
Use $MANPATH if available. This needs to:
- Ignore stderr (we pipe it and throw it away)
- Read the subprocess returncode, since `man --path` is an existing
command that fails instead of a non-existent one (that raises an
exception)
- Properly set up the fallback
Fixes#2194.
There were two places in the code that used the anti-pattern of
returning True on success else an error message. In python you should
always be able to replace `if x == True:` with just `if x:`. Which is
what the lint tool recommended. Unfortunately I didn't notice how the
return value was being used. This fixes that by changing the two
affected functions to return an error message or None on success.
This also adds `from __future__ import print_function` since the code
uses the `print(msg)` function form rather than the `print msg`
statement form. The former works by accident on python2 because the
parens are interpreted as creating parenthesized expression that
devolves to the single string inside the parens. So while the future
import isn't strictly speaking necessary it will help avoid mistakes in
the future if more complex `print()` calls are added.
Partial fix for #3620
`abbr` used to take a single argument and split in on the first space,
but 309e10e7 and predecessors altered this behaviour. Update the web
config use of abbr to the newer format.
Fixes#3620.
Use $USER, prompt_hostname, string
Update to use correct color names such as magenta over purple.
Use bright color variants instead of bold in some cases.
My previous change to avoid creating a *.pyc file when running
create_manpage_completions.py was wrong because I put the
`sys.dont_write_bytecode = True` on the wrong line. Rather than simply
move that statement make the simpler, cleaner, fix that removes the need
for `eval` where that program is invoked.
The Linux kernel only splits on the first whitespace in the shebang line
(unlike BSD which splits on all whitespace). Which means there can be
only one argument after the path to the program.
Producing man pages is done infrequently (basically just at `make test`
and `make install`) so there isn't any point in writing compiled
byte-code versions of the python modules.
This deprecates the use of long options for history sub-commands (e.g.,
`history --delete`) in favor of proper sub-commands (e.g., `history
delete`). It also eliminates the short options for those sub-commands.
Also change option processing to allow options anywhere on the command
line to match how the vast majority of fish builtins handle flags.
Replace --with-time with --show-time.
Fixes#3367
Fish assumed that it could use tparm to emit escapes to set colors
as long as the color was under 16 or max_colors from terminfo was 256::
if (idx < 16 || term256_support_is_native()) {
// Use tparm to emit color escape
writembs(tparm(todo, idx);
If a terminal has max_colors = 8, here is what happenened, except
inside fish:
> env TERM=xterm tput setaf 7 | xxd
00000000: 1b5b 3337 6d .[37m
> env TERM=xterm tput setaf 9 | xxd
00000000: 1b5b 3338 6d .[39m
The first escape is good, that second escape is not valid.
Bright colors should start at \e[90m:
> env TERM=xterm-16color tput setaf 9 | xxd
00000000: 1b5b 3931 6d .[91m
This is what caused "white" not to work in #3176 in Terminal.app, and
obviously isn't good for real low-color terminals either.
So we replace the term256_support_is_native(), which just checked if
max_colors is 256 or not, with a function that takes an argument and
checks terminfo for that to see if tparm can handle it. We only use this
test, because otherwise, tparm should be expected to output garbage:
/// Returns true if we think tparm can handle outputting a color index
static bool term_supports_color_natively(unsigned int c) { return max_colors >= c; }
...
if (term_supports_color_natively(idx) {
And if terminfo can't do it, the "forced" escapes no longer use the fancy
format when handling colors under 16, as this is not going to be compatible with
low color terminals. The code before used:
else {
char buff[16] = "";
snprintf(buff, sizeof buff, "\x1b[%d;5;%dm", is_fg ? 38 : 48, idx);
I added an intermediate format for colors 0-15:
else {
// We are attempting to bypass the term here. Generate the ANSI escape sequence ourself.
char buff[16] = "";
if (idx < 16) {
snprintf(buff, sizeof buff, "\x1b[%dm", ((idx > 7) ? 82 : 30) + idx + !is_fg * 10);
} else {
snprintf(buff, sizeof buff, "\x1b[%d;5;%dm", is_fg ? 38 : 48, idx);
}
Restores harmony to white, brwhite, brblack, black color names.
We don't want "white" to refer to color color #16, but to the
standard color #8. #16 is "brwhite".
Move comments from output.h to output.cpp
Nuke the config.fish set_color hack for linux VTs.
Sync up our various incomplete color lists and fix all color values.
Colors 0-8 are assumed to be brights - e.g. red was FF0000. Perplexing!
Using this table:
<http://www.calmar.ws/vim/256-xterm-24bit-rgb-color-chart.html>
Fixes#3176
Problem with Type2ManParser
before:
complete -c xcode-select -s h -l help --description 'Prints the usage
message. UNINDENT NDENT 0. 0.'
after:
complete -c xcode-select -s h -l help --description 'Prints the
usage message.'
Don't truncate long lines with " [See Man Page]" suffix - use the
reclaimed 15 characters for more-useful usage info.
Improve the --verbose output with:
- spacing fixes
- diagnostics related to input print repr()/quoted as %r to be less
confusing.
- get rid of stupid name() and use type()/__class__.__name__,
- Always use new-style (new as in post python 2.2) classes so this
behaves the same whether we run in python 2 or 3.
- Properly convert left-quotes and right-quotes to that character in
deroff.py
Instead of just using Courier New across the board, have the
browser try several likely available fonts before defaulting
to the system's "monospace".
Thanks @MarkGriffiths
Fixes#2924
I believe apm must have been buggy - example output that I found online
showed `tr` was mangling paths with spaces in it. Should be fixed.
Also, use dscl on OS X in __fish_complete_users.fish like
__fish_print_users.fish already does.
This is meant to make it clear that fish cannot control the terminal
window background color. It also augments the set_color documentation to
describe how it decides which color the terminal can display.
Resolves#2421.
Resolves#2184.
Currently if there is a conflict with two manpages having the same
name, one completion will override the other. But if one can be parsed
and the other can't the one with parsed results will always have a
higher priority.
It seems smart to only let files be parsed that are clearly
manpage files. Other files wouldn't be openend by man so
I think it is safe to guess that only these files are man
pages.
According to the newer code below:
xdg_data_home = os.getenv('XDG_DATA_HOME', '~/.local/share')
the actual default path is ~/.local/share/fish/generated_completions/
This doesn't work with fish_config.
For terlar and pythonista, remove unnecessary color setting.
For informative+git and pythonista, move variable setup into fish_prompt
Fixes#1141
New sample prompt from Acidhub (github.com/acidhub)
This prompt show user|path (full), and a small symbol to
show last command status.
If in a git repository, it's show after the path several
symbols to indicate the branch status and the branch name.
Very handy to me so far.
Signed-off-by: Fernando Manfredi <contact@acidhub.click>
1. When run with no arguments, make abbr do the equivalent
of `abbr --show`
2. Enable "implicit add", e.g. `abbr gco git checkout`
3. Teach `abbr --show` to not use quotes for simple cases
4. Teach abbr to output -- when the abbreviation has
leading dashes
Add some basic tests to abbr too.
Support for space-delimited abbreviations was added to the expansion
parser in fbade198; this commit extends that support to the user-facing
tools, and documents the space-separated behaviour. Equals-delimited
abbreviations are expected to be removed before the next release.
Work on #731.
# The first commit's message is:
Simplify default fish_prompt
No need for the set_color caching now that it's a builtin.
Also simplify the 3 classic prompts in fish_config's sample_prompts set.
- Require all requests to use a session path.
- Use a redirect file to avoid exposing the '/start' URL on the
command line, as it contains the cookie value.
Fix for CVE-2014-2914.
Closes#1438.
Currently fish doesn't recognize toor as special. However, it's likely
that on BSD systems, fish shell will be used on toor, not on root (toor
is an intentionally existing account to use more advanced shell on, like
shell).
When you chroot in Debian, bash shows the chroot environment in the prompt:
```bash
...
if [ -z "${debian_chroot:-}" ] && [ -r /etc/debian_chroot ]; then
debian_chroot=$(cat /etc/debian_chroot)
fi
PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ '
...
```
This is the effect:
```
(chroot_env) user@host:~#
```
It is useful when chrooting, since usually the hostname remains the same and thus you can't distinguish where you are.
Before this change, fish config used 0 as its address. However, this
isn't a good idea from security point of view, as web service can be
accessed from everywhere, and do anything on the account it was ran on.
This also deals with firewalls which block the access to 0 even from
the host machine itself. It possibly might fix#673, but I'm not sure.
It would be nice if this would work without this hack,
but until then, this has to work. Requires you to reinstall
the prompt using fish configuration system.
* Show color scheme title in preview box
* Show information about setting terminal background color on Apply
button mouse hover
* Added text_color_for_color method in colors controller scope
From the Python webbrowser documentation:
"If text-mode browsers are used, the calling process will block until the user exits the browser."
Running fish_config on an ssh server with no GUI browser will open a CLI browser which blocks and stops the server from handling requests.
Using multiprocess to run the server in the background lets CLI browsers access the page, but the page is unusable.
For now, disable CLI browsers and recommend opening the page in a graphical browser.
In the future, maybe write a CLI utility to change prompts and delete history items.
Prefer the standard library lzma module if available. This change prevents
using the backports-lzma when it is installed for a version of Python that
already has the lzma module in its standard library.
