fish_git_prompt may run certain git commands which may invoke certain
external programs as specified `.git/config`. Prevent this by suppressing
certain git config options.
This affects the caret position. In an expression like
123 456
we previously reported:
123 456
^ missing operator
Now we do:
123 456
^ missing operator
We do it on the first space, which should be acceptable.
(no need for a changelog entry, we have already ignored #8511)
Only show the shebang warning for .fish commands.
Use the phrase "interpreter directive" as the formal name for the
shebang.
Switch from windows to Windows for the operating system.
"not not return 34" exits with 34, not 1. This behavior is pretty
surprising but benign. I think it's very unlikely that anyone relies
on the opposite behavior, because using two "not" decorators in one
job is weird, and code that compares not's raw exit code is rare.
The behavior doesn't match our docs, but it's not worth changing the
docs because that would confuse newcomers. Add a test to cement the
behavior and a comment to explain this is intentional.
I considered adding the comment at
parse_execution_context_t::populate_not_process where this behavior
is implemented but the field defintion seems even better, because I
expect programmers to read that first.
Closes#8377
Commit e40eba358 (Treat text following quoted command substitution
as quoted) made parse_util_locate_cmdsubst_range() aware of quoted
command substitutions, by skipping surrounding text via quote_end().
However, it was not quite right. We fail to properly parse
two consecutive command substitutions in the same string,
because we don't maintain the quoting context across calls to
parse_util_locate_cmdsubst_range(). Let's track that bit in a
parameter. This allows us to get rid of the quote_end() hack.
Also apply this to the other place where we call
parse_util_locate_cmdsubst_range() in a loop (highlighting).
Fixes#8500
This fixes a regression about where we report errors:
echo error(here
old: ^
fixed: ^
Commit 0c22f67bd (Remove the old parser bits, 2020-07-02) removed
uses of "error_offset_within_token" so we always report errors at
token start. Add it back, hopefully restoring the 3.1.2 behavior.
Note that for cases like
echo "$("
we report "unbalanced quotes" because we treat the $( as double
quote. Giving a better error seems hard because of the ambguity -
we don't know if quote is meant to be inside or outside the command
substitution.
If you make a script called `foo` somewhere in $PATH, and did not give
it a shebang, this would end up calling
sh foo
instead of
sh /usr/bin/foo
which might not match up.
Especially if the path is e.g. `--version` or `-` that would end up
being misinterpreted *by sh*.
So instead we simply pass the actual_cmd to sh, because we need it
anyway to get it to fail to execute before.
For some reason, the window dimension parameters are ignored by tmux.
Not even an extra "resize-pane -x 80 -y 10" helps. So let's just drop
that assumption from our tests.
When the completion pager fills up all lines of the screen, we subtract
from the pager size the number of lines occupied by the prompt +
command line buffer (typically 1), so the command line is always
visible. However, we only subtract the number of lines *before* the
cursor, so on some multiline commandlines we draw a pager that is
too large for our screen, clobbering the commandline rendering.
Fix this by counting all lines.
Fixes#8509
Possibly fixes#8405
A «complete -C '~/fish-shell/build/fish '» fails to load custom
completions because we do not expand the ~, so
complete_param_for_command() thinks that this command is invalid.
Expand command tokens before loading custom completions.
Fixes#8442
Currently,
set -q --unpath PATH
simply ignores the "--unpath" bit (and same for "--path").
This changes it, so just like exportedness you can check pathness.
This finds the first broken component, to help people figure out where
they misspelt something.
E.g.
```
echo foo >/usr/lob/systemd/system/machines.target.wants/var-lib-machines.mount
```
will now show:
```
warning: Path '/usr/lob' does not exist
```
which would help with seeing that it should be "/usr/lib".
On a commandline like "ls arg" (cursor at end) we do not expand
abbrevations on enter. OTOH, on "ls " we do expand. This can be
frustrating because it means that the two obvious ways to suppress
abbrevation expansion (C-Space or post-expansion C-Z) cannot be used to
suppress expansion of a command without arguments. (One workaround is
"ls #".)
Only expand-on-execute if the cursor is at the command name (no space
in between).
This is a strict improvement for realistic scenarios, because if there
is a space, the user has already expressed the intent to not expand
the abbreviation. (I hope no one is using recursive abbreviations.)
Closes#8423
This was supposed to act like `type -q` or `command -q`, in that it
returns 0 if at least 1 exists.
But because it used the wrong variable it didn't.
Fixes#8431.
This fixes printing octal and hex values that are negative or larger
than UINT_MAX.
Negative values get a leading -, like:
> math --base hex -10
-0xa
Fixes#8417.
Commit ec3d3a481 (Support "$(cmd)" command substitution without line
splitting, 2021-07-02) started treating an input string like
"a$()b" as if it were "a"$()"b". Yet, we do not actually insert the
virtual quotes. Instead we just adapted the definition of when quotes
are closed - hence the changes to quote_end().
parse_util_locate_cmdsubst_range() is aware
of the changes to quote_end() but some of its
callers like parse_util_detect_errors_in_argument() and
highlighter_t::color_as_argument() are not. They split strings at
command substitution boundaries without handling the special quoting
rules. (Only the expansion logic did it right.)
Fix this by handling the special quoting rules inside
parse_util_locate_cmdsubst_range(). This is a bit hacky since it
makes it harder for callers to process some substrings in between
command substitutions, but that's okay because current callers only
care about what's inside the command substitutions.
Fixes#8394
Since #4376, for-loops would set the loop variable outside, so it
stays valid.
They did this by doing the equivalent of
```fish
set -l foo $foo
for foo in 1 2 3
```
And that first imaginary `set -l` would also fire a set-event.
Since there's no use for it and the variable isn't actually set, we
remove it.
Fixes#8384.
widechar_width no longer classifies U+1F41F as widened-in-9, so the
width no longer changes.
Since we're interested in testing the change here, we need a different
emoji.
Just use 🥁, which was introduced in 9 as wide, and therefore widened
in 9.
Like the $status commit, this would add the offset to already existing
errors, so
```fish
(foo)
(bar)
something
```
would see the "(foo)" error, store the correct error location, then
see the "(bar)" error, and *add the offset of (bar)* to the "(foo)"
error location.
Solve this by making a new error list and appending it to the existing
ones.
There's a few other ways to solve this, including:
- Stopping after the first error (we only display the first anyway, I
think?)
- Making it so the source location has an "absolute" flag that shows
the offset has already been added (but do we ever need to add two offsets?)
I went with the simpler fix.
This would break the location of any prior errors without doing
anything of value.
E.g.
```fish
echo foo | exec grep # this exec is not allowed!
$status
somethingelse # The error might be found here!
```
Would apply the offset of `$status` to the offset of `exec`, locating
the error for `exec` somewhere after $status!
Prior to this change, tmux based tests would call 'isolated-tmux' which would
initialize tmux on first call, an admitted "evil hack." Switch to requiring
an explicit call to 'isolated-tmux-start' which then defines 'isolated-tmux'
and other functions. Add some loop-until-prompt logic into
'isolated-tmux-start'. This improves reliability of the tmux tests on systems
under load; at least it makes the tests pass in the background on my Mac.
Remove the '$sleep' variable, to be replaced with 'tmux-sleep'.
This makes it so we treat backspaces as width -1, but never go below a
0 total width when talking about *lines*, like in screen or string
length --visible.
Fixes#8277.
When cd is passed a broken symlink, this changes the error message from
"no such directory" to "broken symbolic link". This scenario probably
won't happen very often since completion won't suggest broken symlinks
but it can't hurt to give a good error.
Fish used to do this until 7ac5932. This logic used to be in
path_get_cdpath, however, that is only used for highlighting, so we
don't need error messages there. Changing cd is enough.
Reword from "rotten" to "broken" since that's what file(1) uses.
Clean-up leftovers from old "rotten" code (nomen est omen).
See #8264
This currently changes builtin realpath with the "-s" option:
builtin realpath -s ///tmp
previously would print "///tmp", now it prints "/tmp".
The only thing "allow_leading_double_slashes" does is allow *two*
slashes.
This is important for `path match`, to be introduced in #8265.
The tmux-prompt test would sometimes fail because the first call was:
isolated-tmux capture-pane -p
this would run a capture-pane which would race with starting fish
itself; occasionally the pane would be empty since fish has not yet
drawn a prompt. Add a loop to give fish time to draw the prompt.
This used the *logical* $PWD, but realpath would operate on the
physical $PWD if given ".", even with -s. This makes this test fail if the $PWD is
logically different from physical.
This was long overdue since the setup logic is much more complex than
the actual tests.
tmux-prompt.fish had extra logic to protect against XDG_CONFIG_HOME
with leading double double-dot. I believe this is no longer necessary
with the new test driver.
We still use our own temp dir because we want to be able to run this
independently of the test driver, This can be useful for debugging
tests. For example we can insert a "$tmux attach" command in a test,
and then run
build/fish -C 'source tests/test_functions/isolated-tmux.fish' tests/checks/tmux-bind.fish
This allows to inspect the state of the test and debug interactively.
Attaching to the terminal doesn't work when running inside littlecheck
because littlecheck consumes our output and doesn't give us a terminal.
(Maybe there's an easy way to fix that?)
