Fix cases like
eval my-cmd (commandline -o)
complete -C "my-cmd $(commandline -o)"
In both cases, we spuriously evaluate tokens like "(inside-quoted-string)"
as command substitutions. Fix this by escaping the strings. The momentarily
regresses the intended purpose of "eval" -- to expand variables -- but the
next commit will fix that.
We're already moving them, we can remove the awkward dot that hides
them, and while we're doing that remove the useless $USER as well.
Most systems will have only one of these files - it's rare to run a
second package manager (especially for anything more than
bootstrapping a container).
We have a lot of completions that look like
```fish
pip completion --fish 2>/dev/null | source
```
That's *fine*, upstream gives us some support.
However, the scripts they provide change very rarely, usually not even
every release, and so running them again for every shell is extremely
wasteful.
In particular the python tools are very slow, `pip completion --fish`
takes about 180ms on my system with a hot cache, which is quite
noticeable.
So what we do is we run them once, store them in a file in our cache
directory, and then serve from that.
We store the mtime of the command we ran, and compare against that for
future runs. If the mtime differs - so if the command was up or
downgraded, we run it again.
This will move all current cache uses to e.g. ~/.cache/fish/
That's better anyway because it makes it easier to remove.
Also it allows supplying a subdir so you can do `__fish_make_cache_dir
completions`
to get ~/.cache/fish/completions.
If I alias "e" to "emacsclient" it will probably accept the same options.
Let's dereference the alias so we can detect support for passing the cursor
position in more cases.
This does not solve the problem for recursive cases (e.g. alias of another
alias). If we want to handle that we would need cycle detection.
This makes it easier to get *any pager* in the number of places we do.
Unfortunately:
1. It can't just execute the pager because that might block
2. We can't really set the necessary options for less here
so they still need to be set outside.
This
Fixes#10074
by falling back to `cat` in that case. We could also decide to abort
instead of using a non-pager, but for history that's probably fine.
This can be bound like `bind \cl clear-screen`, and is, by default
In contrast to the current way it doesn't need the external `clear`
command that was always awkward.
Also it will clear the screen and first draw the old prompt to remove
flicker.
Then it will immediately trigger a repaint, so the prompt will be overwritten.
This was introduced as a workaround to #7215 - xdg-open's generic path
wouldn't background graphical apps.
This has been fixed a month ago in xdg-open, so we can stop doing it.
The good news is this also allows terminal apps to be used again, so
it
Fixes#10045
This was already supposed to handle `--foo=bar<TAB>` cases, except it
printed the `--foo=` again, causing fish to take that as part of the
token.
See #9538 for a similar thing with __fish_complete_directories.
Fixes#10011
Unfortunately, /var/lib/dpkg/status on recent-ish Debian versions at
least only contains the *installed* packages, rendering this solution
broken.
What we do instead is:
1. Remove a useless newline from each package, so our limit would now
let more full package data sets through
2. Increase the limit by 5x
This yields a completion that runs in ~800ms instead of ~700ms on a
raspberry pi, but gives ~10x the candidates, compared to the old
apt-cache version.
This partially reverts 96deaae7d8
* Simplify and fix `__fish_is_zfs_feature_enabled`
Previously `__fish_is_zfs_feature_enabled` was doing
`<whitespace>$queried_feature<whitespace>` pattern matching which
was skipping the state part expected in the follow-up checking code.
Passing the dataset/snapshot in a `target` argument is pointless. As
none of the existing code attempts to do this plus it is also a
private function (`__` prefix), rename of the argument and removal
of extra text replacement should not be considered a breaking change.
* Changed the `&& \` into `|| return`
* Run `fish_indent`
This gives us the biggest chance that these are *visible* in the
terminal, which allows people to choose something nicer.
It changes two colors - the autosuggestion and the pager
description (i.e. the completion descriptions in the pager).
In a bunch of terminals I've tested these are pretty similar - for the
most part brblack for the suggestions is a bit brighter than 555, and
yellow for the descriptions is less blue
than the original.
We could also make the descriptions brblack, but that's for later.
Technically we are a bit naughty in having a few foreground and
background pairs that might not be visible,
but there's nothing we can do if someone makes white invisible on brblack.
Fixes#9913Fixes#3443
This ran two `test`s a `count` and one `echo`, which is a bit wasteful.
So instead, for the common case where you pass one argument, this will
run one `set -q`.
This can save off ~160 microseconds for each ordinary `cd`, which
speeds it up by a factor of ~2 (so 1000 runs of cd might take 260ms
instead of 550ms).
Ideally the cd function would just be incorporated into the builtin,
but that's a bigger change.
After accidentally running a command that includes a pasted password, I want
to delete command from history. Today we need to recall or type (part of)
that command and type "history delete". Let's maybe add a shortcut to do
this from the history pager.
The current shortcut is Shift+Delete. I don't think that's very discoverable,
maybe we should use Delete instead (but only if the cursor is at the end of
the commandline, otherwise delete a char).
Closes#9454
* docs: Add "Writing your own prompt" doc
* Remove a space from the "output"
* some teensy adjustments
* Address feedback
* envvar one more PWD
* More html warning
This prevents leaking the escape sequence by printing nonsense, and it
also allows disabling cursor setting by just setting the variable to
e.g. empty.
And if we ever added any shapes, it would allow them to be used on new
fish and ignored on old
Fixes#9698
Otherwise this would complete
`git --exec-path=foo`, by running `complete -C"'' --exec-path=foo"`,
which would print "--exec-path=foo", and so it would end as
`git --exec-path=--exec-path=foo` because the "replaces token" bit was
lost.
I'm not sure how to solve it cleanly - maybe an additional option to
`complete`?
Anyway, for now this
Fixes#9538.
After deleting a history item with
history delete --exact --case-sensitive the-item
it is still reachable by history search until the shell is restarted.
Let's fix this by saving history after each deletion. The non-exact variants
of "history delete" already do this. I think this was just an oversight
owed to the fact that hardly anyone uses "--exact" (else we would surely
have changed it to not require an explicit "--case-sensitive").
`xbps-query` actually parses `-Rsl` as `-Rs l`, which means that packages
without the letter "l" in their names or descriptions are not included in
`__fish_print_xbps_packages`'s output.
* Improve prompt execution time
* Change status to changes
* Remove grep/awk/sort
* Remove calls to grep/awk/sort
* Don't overwrite user defined colors
* Make look more consistent with git
This removes a weird `ls` call (that just decorates directories), and
makes it behave like normal path completion.
(really, this should be a proper option to complete)
Fixes#9285
This is an additional tool, and this function is executed on source
time so we'd spew errors.
(also remove an ineffective line - it's probably *nicer* with the
read, but that's not what's currently effectively doing anything)
I have no idea why `apt-cache --no-generate show` is so slow since it basically
dumps the contents of the cache file located at `/var/lib/dpkg/status`. We are
technically bypassing any waits on the cache lock file so this may produce
incorrect results if the cache is being regenerated in the moment, but that's a
small price to pay and the results are likely confined to simply not generating
comprehensive results.
With this change, we no longer need to truncate results to the first n matches
and we no longer only print packages beginning with the commandline argument
enabling fish's partial completions logic to offer less-perfect suggestions when
no better options are available.
Even though we are generating more usable completions, we still trounce the old
performance by leaps and bounds:
```
Benchmark #1: fish -c "complete -C\"apt install ac\""
Time (mean ± σ): 2.165 s ± 0.033 s [User: 267.0 ms, System: 1932.2 ms]
Range (min … max): 2.136 s … 2.256 s 10 runs
Benchmark #2: build/fish -c "complete -C\"apt install ac\""
Time (mean ± σ): 111.1 ms ± 1.8 ms [User: 38.9 ms, System: 72.9 ms]
Range (min … max): 108.2 ms … 114.9 ms 26 runs
Summary
'build/fish -c "complete -C\"apt install ac\""' ran
19.49 ± 0.44 times faster than 'fish -c "complete -C\"apt install ac\""'
```
Bracketed paste adds one undo entry unless the pasted text contains a '
or \. This is because the "paste" bind-mode has bindings for those keys,
so they effectively start a new undo entry.
Let's fix this by adding an explicit undo group (our first use of this
feature!).
On macOS, fish_git_prompt was failing to correctly handle the case where
another git was installed, e.g. /usr/local/bin/git from Homebrew.
Disable the workarounds in that case.
a lynx-internal hash of div.contents collided with em>a which caused
built-in styling to render much of entire pages as emphasized links.
Since switching from doxygen, we haven't had a <div class="contents">
so this workaround is no longer needed.
Our macOS workarounds involve running "xcrun" to check if Git is installed.
On a freshly upgraded Ventura system that does not have XCode or
CommandLineTools installed, "xcrun" will print this error:
xcrun: error: invalid active developer path (/Library/Developer/CommandLineTools), missing xcrun at: /Library/Developer/CommandLineTools/usr/bin/xcrun
on every prompt. Let's silence this error.
The `git` can already have finished here, leading to "disown: There
are no suitable jobs". This has caused a failure on Github Actions.
So we do $last_pid and silence all output, like we do in other spots
macOS ships with a stub `/usr/bin/python3` which by default opens a
dialog to install the command line tools. As we run `python3` initially
at launch, this causes the dialog to appear on first run of fish, if the
command line tools are not installed.
Fix this by detecting the case of `/usr/bin/python3` on Darwin without
the command line tools installed, and do not offer that as a viable
python.
git on macOS has two hazards:
1. It comes "preinstalled" as a stub which pops a dialog to install
command line developer tools.
2. It may populate the xcrun cache when run for the first time, which
may take several seconds.
We fix these as follows, both fixes limited to Darwin:
1. If git is `/usr/bin/git` and `xcode-select --print-path` fails,
then do not run git automatically.
2. Second, if there is no file at `xcrun --show-cache-path`, we take it
as an indication that the cache is not yet populated. In this case we
run `git` in the background to populate the cache.
Credit to @floam for the idea.
Fixes#9343. Fixes#6625.
I often hit Shift-Return accidentally, which makes my terminal echo a
weird escape sequence. Traditionally, terminals interpret Shift-Return
as Return, so let's follow that behavior. Analoguous to commit 1dc526884
(Bind Shift+Space CSI u sequence to Space, 2022-04-24).
Prior to this change, abbreviations were stored as fish variables, often
universal. However we intend to add additional features to abbreviations
which would be very awkward to shoe-horn into variables.
Re-implement abbreviations using a builtin, managing them internally.
Existing abbreviations stored in universal variables are still imported,
for compatibility. However new abbreviations will need to be added to a
function. A follow-up commit will add it.
Now that abbr is a built-in, remove the abbr function; but leave the
abbr.fish file so that stale files from past installs do not override
the abbr builtin.
Introduced with 3.6.0 `fish_cursor_selection_mode` variable breaks
existing vi bindings (for example, input sequence `abc<Esc>0vd` doesn't
delete the `a` character as would be expected).
This patch fixes it by switching `fish_cursor_selection_mode` to
`inclusive` and back.
When this was introduced, we used fish_indent --ansi to format
the output of `builtin functions` for color output in `type`, etc.
We don't anymore.
Today it's not a potential showstopper if one launches a fish
session with a five year-old fish_indent in $PATH. We need not
go to lengths to try to make sure we run whatever is in the
build dir adjacent to the `fish` binary.
The 'str' variable was apparently mistakenly removed by 49c5f96470.
Re-add it, and regex-escape it as well.
Allow completing on apropos <TAB> instaed of requiring an initial char.
Use __fish_apropos instead of apropos.
New regex to hopefully work on more platforms.
Explicitly use ^ instead of adding it at __fish_apropos
For security reasons, some terminals require explicit permission from the
user to interpret OSC 52. One of them is [tmux] but that one usually runs
inside another terminal. This means we can usually write directly to the
underlying terminal, bypassing tmux and the need for user configuration.
This only works if the underlying terminal is writable to the fish user,
which may not be the case if we switched user. For this reason, keep writing
to stdout as well, which should work fine if tmux is configured correctly.
[tmux]: https://github.com/tmux/tmux/wiki/Clipboard
When running inside SSH, Control-X runs a clipboard utility on the remote
system. For pbcopy (and probably clip.exe too) this means that we write to the
remote system's clipboard. This is usually not what the user wants (although
it is consistent with fish_clipboard_paste). When X11 forwarding is used,
xclip/xsel copy to the SSH client's clipboard, which is what most users want.
When we don't have X11 forwarding, we need a different solution. Fortunately,
modern terminal emulators implement the OSC 52 escape sequence for setting
the clipboard of the terminal's system. Use it in fish_clipboard_copy.
Tested in SSH and Docker containers on foot, iTerm2, kitty, tmux and xterm
(this one requires "XTerm.vt100.allowWindowOps: true").
Should also work in GNU screen and Windows Terminal. On terminals that don't
support OSC 52 (like Gnome Terminal or Konsole), it seems to do nothing.
Since there does not seem to be a way to feature-probe OSC 52, let's just
always do both (pbcopy and friends as well as OSC 52). In future, we should
probably stop calling pbpaste and clip.exe, at least on remote systems.
I think there is also an escape sequence to request pasting the system
clipboard but that's less important and less popular, possibly due to
security concerns.
This makes the output a little easier on the eyes.
Tests appear to not need any changes to pass. I always forget whether or not
littlecheck cares about whitespace.
Two different bugs completely broke `trap -p`. First bug broke filtering of
functions with trap handlers (`functions -na` prints functions separated by a
comma, not a new line). Second bug broke showing of function definitions for
traps because a refactor renamed only some call sites but references to `$i`
renamed.
These issues were introduced in a6820cbe and appear to have been caught just in
time: no released version is affected (changes made post-3.5.1).
It's a variable that holds all potential directories. The old name
makes it confusing to look at some of its usage sites and figure out
what is actually going on because they make no sense if $dir is only one
entry.
Don't just save known color values but any values that could have been loaded
from a .theme file.
Also, refactor the theme variable name whitelist/filter in a shared "global"
variable so we never forget to update it at any of the individual use sites.
The documentation states that running `fish_config theme save` after
`fish_config theme choose [theme_name]` will result in "saving" the
currently chosen theme, but this does not match the actual behavior of
`fish_config theme save` which expects a trailing argument specifying
the name of the theme to select/persist.
Given that the documented way has been included in a release and that it
makes more sense than calling `fish_config theme save xxx` when you are
*loading from* xxx and not *saving to* xxx, this patch revises
`fish_config.fish` to support the documented behavior.
When `fish_config theme save xxx` is used, xxx is loaded w/ its specified colors
saved to the according variables in the universal scope. But if `fish_config
theme save` is used without a theme's name specified, then the currently
specified (known) fish color variables are persisted from whatever scope they're
currently in (usually in the global scope from previewing a theme) to universal
variables of the same name.
This does *not* catch color variables unknown to fish! If a theme and a
prompt agree on some variable to hold some color but it's not a color variable
known to fish, it won't be persisted!
Closes#9088.
This makes these tools usable in a pipe.
You can run
```fish
some-long-command | fish_clipboard_copy
```
to copy some command's output to your clipboard, and
```fish
fish_clipboard_paste | some-other-command
```
To feed your clipboard to some command.
We only erase existing globals for some of the theme-related variables
but not for all the `known_colors`, causing `fish_config` to still emit
warnings for these if saving a theme choice after trying it.
There are a million existing ways of skinning this cat, but it's a good parallel
to `__fish_seen_argument` to have, in a similar vein to
`__fish_seen_subcommand_from`.
Commit 09685c3682 tried making the apt
completions faster by doing two things:
1. Introduce a limiting "head"
2. Re-replace our "string" usage with tr
Unfortunately, in doing so it introduced a few issues:
1. The "tr" had a dangling "+" so it cut apart package
descriptions that contained a "+".
This caused e.g. "a C++ library" to generate another completion
candidate, "library".
2. In reusing "tr" it probably reintroduced #8575,
as tr is not 8-bit-clean.
3. It filtered too early, on the raw apt-cache output,
which caused it to fill up with long descriptions.
So e.g. for "texlive" it would only generate 10 completions,
where it should have matched 54 packages.
Because most of the speedup is in the "head" stopping early, we
instead go back to the old string way, but introduce a limiting "head"
after the "sed" (which will have removed everything but the package
name line and the first line of the description)
In my tests this is about ~10% slower than doing head early and using
tr, but it's more correct.
Admittedly I haven't been able to reproduce the 35s scenario that
09685 talks about, but the most likely cause of that is *apt-cache*
being slow - I don't see how string can be that much slower on another
system - and so it will most likely also be fixed by doing head here.
Future possibilities here include:
1. Using "apt-cache search --names-only", which gives a much nicer
format (but only for non-installed packages - the search strings are
apparently ANDed?)
2. Switching to `string split`, possibly using NUL and using `string
split0`?
3. Introducing a `string --null-in` switch so we can get by with one
`string`
4. (multi-threaded execution so the `string`s run in parallel)
`apt-cache` is just so incredibly slow that filtering against the final results
just doesn't cut it. Attempting to match against 'ac.*' (already taking
advantage of changing short search terms into prefix-only matches) would take
35 seconds, all of bottlenecked before the filtering step. This change uses more
of a heuristic to filter `apt-cache` results directly (before additional
filtering) to speed things up.
A variety of different limits from 100 to 5000 were timed and their result sets
compared to see what ended up artificially limiting valid completions vs what
took too long to be considered functional/usable and this is where we ended up.
* Replace ";" with "\n" in alias-generated functions
This can let us add a "#" in our aliases to make
them ignore additional arguments.
* Update changelog about aliases that ignore arguments
* Update test for alias.fish
This is now compliant with the aliases that can
ignore arguments.
This used a prompt command, but since the prompt was interpolated and
included a `?` it would be run as a glob without qmark-noglob.
Since it's simpler to pass a prompt string, just do that.
This checked the locale, but did so in a way that's fundamentally
broken:
1. $LANG isn't the only variable ($LC_ALL and $LC_CTYPE)
2. Even if $LANG is set that doesn't mean it's actually working
We could add a `status is-multibyte` here to figure out if we have a
multibyte locale?
But instead, since this is dealing with adding an ellipsis, let's just
add it to `string ellipsize`.
One slight difference is that shortening the branch now counts the ellipsis width.
I.e. assuming the branch is "long-branch-name"
```fish
set -g __fish_git_prompt_shorten_branch_len 8
```
might now print "long-br…" instead of "long-bra…". This is nicer because we can now give the actual maximum width.
The alternative is to add a "--exclusive" option to "string ellipsize" that doesn't count the ellipsis width. So `string ellipsize --char "..." --max 8" long-branch-name` might result in "long-bra...", which is 11 wide.
This moves the stuff that creates skeleton/boilerplate files to
the same place we initialize uvars for the first time or on upgrade.
Being a bit less aggresssive here theoretically makes launch a little
lighter but really I personally just found it weird I couldn't
just delete my empty config.fish file without it getting recreated
and sourced every launch.
This reimplements ridiculousfish/control_r which is a more future-proof
approach than #6686.
Pressing Control+R shows history in our pager and allows to search filter
commands with the pager search field.
On the surface, this works just like in other shells; though there are
some differences.
- Our pager shows multiple results at a time.
- Other shells allow to use up arrow/down arrow to select adjacent entries
in history. Shouldn't be hard to implement but the hidden state might
confuse users and it doesn't play well with up-or-search, so this is
left out.
Users might expect the history pager to use subsequence matching (fuzzy
matching) like the completion pager, however due to the history pager design it
uses substring matching. We could change this in future, however that means
we would also want to change the ordering from "reverse-chronological" to
"longest common subsequence" (e.g. what fuzzy finders do), because otherwise
a query "fis" might give this ordering:
fsck /dev/disk/by-partlabel/Linux\x20filesystem
fish
which is probably not what the user wants.
The pager shows only a small number of history items at a time. This is
because, as explained above, the history pager does not support subsequence
matching, so navigating it does not scale well.
Closes#602
This can be used to print the modification time, like `stat` with some
options.
The reason is that `stat` has caused us a number of portability
headaches:
1. It's not available everywhere by default
2. The versions are quite different
For instance, with GNU stat it's `stat -c '%Y'`, with macOS it's `stat
-f %m`.
So now checking a cache file can be done just with builtins.
/etc/hosts specifies, that everything after a #-character is to be
treated as a comment. The current __fish_print_hostnames however only
considers #-characters at the beginning of a line.
Thus the comment from following valid hosts-entry would end up in the
completion output:
1.2.3.4 myhost # examplecomment
getent hosts properly handles comments.
When we want to print something while the prompt is still active, we move the
cursor by printing a newline for each line in the prompt beyond the first
one. As established by 80fe0a7fc (fish_job_summary: Format message better
for multiline prompts, 2022-06-28), our use of "string repeat" actually
prints an extra newline. Let's remove it here as well.
This was supposed to be number of lines in the prompt minus 1, but
string repeat added one.
Also it triggered even in case of the stopped job message, which is
already repainted differently.
So we add it when we need to repaint ourselves.
As a bonus add a newline before in that case so the message isn't
awkwardly printed into the commandline.
Fixes#9044.
Discussions with the tmux maintainer show that:
1. We no longer need the passthrough sequence at all (and it's
deactivated by default)
2. Tmux can check if the outer terminal supports cursor shaping
Fixes#8981
This commit lets you check the manpage for a leading command by moving
the cursor over it, matching the behavior of tab complete.
It also lets you select the man page for the base of a two-part command
like `string match`.
The additional regex case is added because
`commandline -t` returns an empty string when the cursor is after a
space, e.g. at the end of 'sudo ', which the later checks don't handle.
This diagram shows the manpage picked for different cursor positions:
> sudo -Es time git commit -m foo
+-------++---++--++------------+
| || || || |
| || || |+------------+
| || || | git-commit
| || |+--+
| || | git
| |+---+
| | time
+-------+
sudo
* updated function __fish_print_portage_repository_paths.fish to support file, dir and modified defaults
* Revised version of share/functions/__fish_print_portage_repository_paths.fish
* improved syntax and regex as suggested
The recent improvements to multiline prompts and vi-mode in #3481 appear
to be sufficient to make iTerm2 well behaved, so remove our hack which
disabled it by default.
Fixes#3696
This removes the awkward secondary logic.
Note that we still ship a function called `__terlar_git_prompt`
because people who picked the prompt will still be calling it - we
don't update the prompt.
