Given "abbr foo something", the input sequence
foo<space><ctrl-z><space>
would re-expand the abbreviation on the second space which is surprising
because the cursor is not at or inside the command token. This looks to be
a regression from 00432df42 (Trigger abbreviations after inserting process
separators, 2024-04-13)
Happily, 69583f303 (Allow restricting abbreviations to specific commands
(#10452), 2024-04-24) made some changes that mean the bad commit seems no
longer necessary. Not sure why it works but I'll take it.
On a command with multiline quoted string like
begin
echo "line1
line2"
end
we actually indent line2 which seeems misleading because the indentation
changes the behavior when typed into a script.
This has become more prominent since commits
- a37629f86 (fish_clipboard_copy: indent multiline commands, 2024-04-13)
- 611a0572b (builtins type/functions: indent interactively-defined functions, 2024-04-12)
- 222673f33 (edit_command_buffer: send indented commandline to editor, 2024-04-12)
which add indentation to an exported commandline.
Never indent quoted strings, to make sure the rendering matches the semantics.
Note that we do need to indent the opening quote which is fine because
it's on the same line.
While at it, indent command substitutions recursively. That feature should
also be added to fish_indent's formatting mode (which is the default).
Fortunately the formatting mode already works fine with quoted strings;
it does not indent them. Not sure how that's done and whether indentation
can use the same logic.
vared.fish is installed at
/home/fishuser/fish-build/test/buildroot/usr/local/share/fish/functions/vared.fish
as oppposed to being sourced from share/functions/.
I'm not 100% sure why this happens but it doesn't seem wrong.
These take over two minutes under ASAN (like ~40 seconds without, so
they aren't quick to begin with), and don't really give any additional
insight.
So we skip them to save time
This tries to open the given file to use as stdin, and if it fails,
for any reason, it uses /dev/null instead.
This is useful in cases where we would otherwise do either of these:
```fish
test -r /path/to/file
and string match foo < /path/to/file
cat /path/to/file 2>/dev/null | string match foo
```
This both makes it nicer and shorter, *and* helps with TOCTTOU - what if the file is removed/changed after the check?
The reason for reading /dev/null instead of a closed fd is that a closed fd will often cause an error.
In case opening /dev/null fails, it still skips the command.
That's really a last resort for when the operating system
has turned out to be a platypus and not a unix.
Fixes#4865
(cherry picked from commit df8b9b7095)
This introduces a feature flag, "test-require-arg", that removes builtin test's zero and one argument special modes.
That means:
- `test -n` returns false
- `test -z` returns true
- `test -x` with any other option errors out with "missing argument"
- `test foo` errors out as expecting an option
`test -n` returning true is a frequent source of confusion, and so we are breaking with posix in this regard.
As always the flag defaults to off and can be turned on. In future it will default to on and then eventually be made read-only.
There is a new FLOG category "deprecated-test", run `fish -d deprecated-test` and it will show any test call that would change in future.
Another consequence of a583fe723 ("commandline -f foo" to skip queue
and execute immediately, 2024-04-08) is that "commandline -f repaint"
will paint the prompt with the current value of $status which might be
set from a shell command in a the currently executing binding, instead of
waiting for the top-level status. This is wrong, at least historically. It
surfaces in bindings like alt-w which always paint a status value of [1]
when on single-lines commandlines.
Another regression is that a redundant repaint in a signal handler outputs
an extra prompt.
Fix both by making repaint commands go over the input queue again. This way,
they are always run with a good commandline state. There is no need to
repaint immediately because I don't think anyone has a data dependency on it
(we currently don't expose the prompt string), it's only for rendering.
Popular operating systems support shift-delete to delete the selected item
in an autocompletion widgets. We already support this in the history pager.
Let's do the same for up-arrow history search.
Related discussion: https://github.com/fish-shell/fish-shell/pull/9515
File names that have lots of spaces look quite ugly when inserted as
completions because every space will have a backslash.
Add an initial heuristic to decide when to use quotes instead of
backslash escapes.
Quote when
1. it's not an autosuggestion
2. we replace the token or insert a fresh one
3. we will add a space at the end
In future we could relax some of these requirements.
Requirement 2 means we don't quote when appending to an existing token.
Need to find a natural behavior here.
Re 3, if the completion adds no space, users will probably want to add more
characters, which looks a bit weird if the token has a trailing quote.
We could relax this requirement for directory completions, so «ls so»
completes to «ls 'some dir with spaces'/».
Closes#5433
I think commit 8386088b3 (Update commandline state changes eagerly as well,
2024-04-11) broke the alt-s binding.
This is because we update the commandline state snapshot (which is consumed
by builtin commandline and others) only at key points. This seems like a
dubious optimization. With the new streamlined bind execution semantics,
this doesn't really work anymore; any shell command can run any number of
commands like "commandline -i foo" which should synchronize.
Do the simple thing of calculating the snapshot whenever needed.
If a binding was input starting with "\e", it's usually a raw control sequence.
Today we display the canonical version like:
bind --preset alt-\[,1,\;,5,C foo
even if the input is
bind --preset \e\[1\;5C foo
Make it look like the input again. This looks more familiar and less
surprising (especially since we canonicalize CSI to "alt-[").
Except that we use the \x01 representation instead of \ca because the
"control" part can be confusing. We're inside an escape sequence so it seems
highly unlikely that an ASCII control character actually comes from the user
holding the control key.
The downside is that this hides the canonical version; it might be surprising
that a raw-escape-sequence binding can be erased using the new syntax and
vice versa.
See the changelog additions for user-visible changes.
Since we enable/disable terminal protocols whenever we pass terminal ownership,
tests can no longer run in parallel on the same terminal.
For the same reason, readline shortcuts in the gdb REPL will not work anymore.
As a remedy, use gdbserver, or lobby for CSI u support in libreadline.
Add sleep to some tests, otherwise they fall (both in CI and locally).
There are two weird failures on FreeBSD remaining, disable them for now
https://github.com/fish-shell/fish-shell/pull/10359/checks?check_run_id=23330096362
Design and implementation borrows heavily from Kakoune.
In future, we should try to implement more of the kitty progressive
enhancements.
Closes#10359
It appears that the shift-delete key escape sequence is not being generated
because there's no mapping for it in screen-256color, causing the test to fail.
Switch to using f1 for the test.
This makes it so code like
```fish
echo foo
echo bar
```
is collapsed into
```fish
echo foo
echo bar
```
One empty line is allowed, more is overkill.
We could also allow more than one for e.g. function endings.
Commit e5b34d5cd (Suppress autosuggesting during backspacing like browsers do,
2012-02-06) disabled autosuggestion when backspacing. Autosuggestions are
re-enabled whenever we insert anything in the command line. Undo uses a
different code path to insert into the command line, which does not re-enable
autosuggestion.
Fix that.
Also re-enable autosuggestion when undo erases from the command line.
This seems like the simplest approach. It's not clear if there's a better
behavior; browsers don't agree on one in any case.
This is the last remnant of the old percent expansion.
It has the downsides of it, in that it is annoying to combine with
anything:
```fish
echo %self/foo
```
prints "%self/foo", not fish's pid.
We have introduced $fish_pid in 3.0, which is much easier to use -
just like a variable, because it is one.
If you need backwards-compatibility for < 3.0, you can use the
following shim:
```fish
set -q fish_pid
or set -g fish_pid %self
```
So we introduce a feature-flag called "remove-percent-self" to turn it
off.
"%self" will simply not be special, e.g. `echo %self` will print
"%self".
This stops you from doing e.g.
```fish
set pager command less
echo foo | $pager
```
Currently, it would run the command *builtin*, which can only do
`--search` and similar, and would most likely end up printing its own
help.
That means it very very likely won't work, and the code is misguided -
it is trying to defeat function resolution in a way that won't do what
the author wants it to.
The alternative would be to make the command *builtin* execute the
command, *but*
1. That would require rearchitecting and rewriting a bunch of it and
the parser
2. It would be a large footgun, in that `set EDITOR command foo` will
only ever work inside fish, but $EDITOR is also used outside.
I don't want to add a feature that we would immediately have to discourage.
Commit b768b9d3f (Use fuzzy subsequence completion for options names as well,
2024-01-27) allowed completing "oa" to "--foobar", which is a false positive,
especially because it hides other valid completions of non-option arguments.
Let's at least require a leading dash again before completing option names.
