This would tell you a function was "Defined in - @ line 1" for every
function defined via `source`.
Really, ideally we'd figure out where the *source* call was, but that'
much more complicated, so we just give a comprehensible message.
This matches what we do in --profile's output:
```
> source /home/alfa/.config/fish/config.fish
--> set -gx XDG_CACHE_HOME /home/alfa/.cache
--> set -gx XDG_CONFIG_HOME /home/alfa/.config
--> set -gx XDG_DATA_HOME /home/alfa/.local/share
```
instead of
```
+ source /home/alfa/.config/fish/config.fish
+++ set -gx XDG_CACHE_HOME /home/alfa/.cache
+++ set -gx XDG_CONFIG_HOME /home/alfa/.config
+++ set -gx XDG_DATA_HOME /home/alfa/.local/share
```
E.g. if we do `string match -q`, and we find a match, nothing about
the input can change anything, so we quit early.
This is mainly useful for performance, but it also allows `string`
with `-q` to be used with infinite input (e.g. `yes`).
Alternative to #7495.
Currently a bit limited, unfortunately printf's `%a` specifier is
absolutely unreadable.
So we add `hex` and `octal` with `0x` and `0` prefixes respectively,
and also take a number but currently only allow 16 and 8.
The output is truncated to integer, so scale values other than 0 are
invalid and 0 is implied.
The docs mention this may change.
The '--import' flag was used for importing named capture groups, but it
was decided to always import them unconditionally. This flag was causing
the tests to fail.
This was typically overridden by "too many/few arguments", but it's
actually incorrect:
sin(55
has the correct number of arguments to `sin`, but it's lacking
the closing `)`.
This switch is no longer necessary when only one command is given.
Internally completions are stored separately for each command,
so we only every print one command name per "complete" line anyway.
These aliases seem to be common, see #7389 and others. This prevents
recursion on that example, so `alias ssh "env TERM=screen ssh"` will just
have the same completions as ssh.
Checking the last token is a heuristic which hopefully works for most
cases. Users are encouraged to use functions instead of aliases.
I am not sure why this worked, actually.
These tests did not have $fish set anywhere, and on my fresh OpenBSD
VM it ended up calling whatever that calls "fish" (I think it's that
"Go fish!" game?).
If the padding is not divisible by the char's width without remainder,
we pad the remainder with spaces, so the total width of the output is correct.
Also add completions, changelog entry, adjust documentation, add examples
with emoji and some tests. Apply some minor style nitpicks and avoid extra
allocations of the input strings.
Prior to this change, tab completing with a variable assignment like
`VAR=val cmd<tab>` would parse out and apply VAR=val, then recursively
invoke completions. This caused some awkwardness around the wrap chain -
if a wrapped command had a variable completion we risked infinite
recursion. A secondary problem is that we would run any command
substitutions inside variable assignment, which the user does not expect
to run until pressing enter.
With this change, we explicitly track variable assignments encountered
during tab completion, including both those explicitly given on the
command line and those found during wrap chain walk. We then apply them
while suppressing command substitutions.
In preparation for applying variable assignments (VAR=VAL cmd), separate
them out from the command when performing completions. This includes both
those that the user typed, and any that come about through
completion --wraps.
The "wrap chain" refers to a sequence of commands which wrap other
commands, for completion purposes. One possibility is that a wrap chain
will produce a combinatorial explosion or even an infinite loop, so there
needs to be logic to prevent that. Part of that logic is encapsulated in a
visited set (wrap_chain_visited_set_t) to prevent exploring the same item
twice.
Prior to this change, we stored pairs (command, wrapped_command). But we
only really need to store the wrapped command. Switch to that.
One consequence is that if a command wraps another command in more than
one way, we won't explore both ways. This seems unlikely in practice.
Detect recursive calls to builtin complete and the internal completion in
the same place.
In 0a0149cc2 (Prevent infinite recursion when completion wraps variable assignment)
we don't print an error when completing certain aliases like:
alias vim "A=B vim"
But we also gave no completions.
We could make this case work, but I think that trying to salvage situations
like this one is way too complex. Instead, let the user know by printing an
error. Not sure if the style of the error fits.
We could add some heuristic to alias to not add --wraps in some cyclic cases.
This reads any additional positional arguments given to `fish -c` into
$argv.
We don't handle the first argument specially (as `$0`) as that's confusing and
doesn't seem very useful.
Fixes#2314.
Closes#7344
Apply a targeted fix to the place where complete() is called to handle nested
variable assignments. Sadly, reporting an error is probably not okay here,
because people might legitimately use aliases like:
alias vim "A=B command vim"
This is all a bit ugly, and I hope to find a cleaner solution. Supporting
completions on commandlines like `x=$PWD cd $x/ ` is a nice feature but it
comes with some complexity.
"function --argument" is not a thing, it's "--argument-names". This only
accidentally works because our getopt is awful and allows abbreviated
long options.
Similarly, one argparse test used "--d" instead of "-d" or "--def".
This re-enables the test that eval retains pgroups, from #6806.
The old version was racey and failed a lot. In the new version, we use
temp files to resolve the race.
The case for symlinked directories being duplicated a lot isn't there,
but there *is* a usecase for adding the symlink rather than the
target, and that's homebrew.
E.g. homebrew installs ruby into /usr/local/Cellar/ruby/2.7.1_2/bin,
and links to it from /usr/local/opt/ruby/bin. If we add the target, we
would miss updates.
Having path entries that point to the same location isn't a big
problem - it's a path lookup, so it takes a teensy bit longer. The
canonicalization is mainly so paths don't end up duplicated via weird
spelling and so relative paths can be used.
Taken from GNU realpath, this one makes realpath not resolve symlinks.
It still makes paths absolute and handles duplicate and trailing
slashes.
(useful in fish_add_path)
Currently, completions have to be specified like
```fish
complete -c foo -l opt
```
while
```fish
complete foo -l opt
```
just complains about there being too many arguments.
That's kinda useless, so we just assume if there is one left-over
argument that it's meant to be the command.
Theoretically we could also use *all* the arguments as commands to
complete, but that seems unlikely to be what the user wants.
(I don't think multi-command completions really happen)
Currently only `complete` will list completions, and it will list all
of them.
That's a bit ridiculous, especially since `complete -c foo` just does nothing.
So just make `complete -c foo` list all the completions for `foo`.
Previously, when a command wasn't found, fish would emit the
"fish_command_not_found" *event*.
This was annoying as it was hard to override (the code ended up
checking for a function called `__fish_command_not_found_handler`
anyway!), the setup was ugly,
and it's useless - there is no use case for multiple command-not-found handlers.
Instead, let's just call a function `fish_command_not_found` if it
exists, or print the default message otherwise.
The event is completely removed, but because a missing event is not an error
(MEISNAE in C++-speak) this isn't an issue.
Note that, for backwards-compatibility, we still keep the default
handler function around even tho the new one is hard-coded in C++.
Also, if we detect a previous handler, the new handler just calls it.
This way, the backwards-compatible way to install a custom handler is:
```fish
function __fish_command_not_found_handler --on-event fish_command_not_found
# do a little dance, make a little love, get down tonight
end
```
and the new hotness is
```fish
function fish_command_not_found
# do the thing
end
```
Fixes#7293.
Now command, jobs, type, abbr, builtin, functions and set take `-q` to
query for existence, but the long option is inconsistent.
The first three use `--quiet`, the latter use `--query`. Add `--query`
to the first three, but keep `--quiet` around.
Fixes#7276.
Just as `math "bitand(5,3)"` and `math "bitor(6,2)"`.
These cast to long long before doing their thing,
so they truncate to an integer, producing weird results with floats.
That's to be expected because float representation is *very*
different, and performing bitwise operations on floats feels quite useless.
Fixes#7281.
It could be nice to use a heuristic for this in future, but for now let's
stick to the old behavior so we can keep formatting scripts without occasional
bad formatting changes.
A heuristic could also be used to break lines after |, && or || but I don't
think there is much need for that at the moment.
Closes#7252
This indents continuations after pipes and conjunctions if they contain
a newline.
Example:
cmd1 &&
cmd2
But it avoids the "double indent" if it indented unconditionally:
cmd1 | begin
cmd2
end
More work towards improving #7252
Prior to this change, when emitting gap text (comments, newlines, etc),
fish_indent would use the indentation of the text at the end of the gap.
But this has the wrong result for this case:
begin
command
# comment
end
as the comment would get the indent of the 'end'. Instead use the indent
computed for the gap text itself.
Addresses one case of #7252.
This one sometimes fails with a zombie detected, so I'm assuming it's
too fast for reaping to happen, so we add another 100ms sleep.
Yeah, this isn't great but...eh
This changes how fish attempts to protect itself from calling tcsetpgrp() too
aggressively. Recall that tcsetpgrp() will "force" itself, if SIGTTOU is
ignored (which it is in fish when job control is enabled).
Prior to this fix, we avoided SIGTTINs by only transferring the tty ownership
if fish was already the owner. This dated from a time before we had really
nailed down how pgroups should be assigned. Now we more deliberately assign a
job's pgroup so we don't need this conservative check.
However we still need logic to avoid transferring the tty if fish is not the
owner. The bad case is when job control is enabled while fish is running in the
background - here fish would transfer the tty and "steal" from the foreground
process.
So retain the checks of the current tty owner but migrate them to the point of
calling tcsetpgrp() itself.
This switches fish_indent from parsing with parse_tree
to the new ast.
This is the most difficult transition because the new ast retains less
lexical information than the old parse tree. The strategy is:
1. Use parse_util_compute_indents to compute indenting for each token.
2. Compute the "gap text" between the text of significant tokens. This
contains whitespace, comments, etc.
3. "Fix up" the gap text while leaving the significant tokens alone.
A broken/missing optspec or `--` is a bug in the script using
argparse, an unknown option or invalid argument is a bug in using that script.
So in the former case print a stacktrace, because the person writing
the `argparse` call is at fault, in the latter don't.
Fixes#6703.
With the new pexpect based framework, bind and pipeline expect tests can
be removed.
Amusingly the complete.fish check required the existence of bind.expect.
Fix the check at the same time.
There's a terrible number of fishscripts that start with
set path (dirname (status filename))
And that's really just a bit boring.
So let's let it be
set path (status dirname)
This is a function you can either execute once, interactively, or
stick in config.fish, and it will do the right thing.
Some options are included to choose some slightly different behavior,
like setting $PATH directly instead of $fish_user_paths, or moving
already existing components to the front/back instead of ignoring
them, or appending new components instead of prepending them.
The defaults were chosen because they are the most safe, and
especially because they allow it to be idempotent - running it again
and again and again won't change anything, it won't even run the
actual `set` because it skips that if all components are already in.
Fixes#6960.
Variables like $status and $history showed up in all scopes, including
universal, when querying with `set -q` or `set -S`.
This makes it so they all only count as set in global scope, because
we already only allow assignment to electric variables in global scope.
Fixes#7032
Give string expansion an (optional) parent pgroup. This is threaded all
the way into eval(). This ensures that in a mixed pipeline like:
cmd | begin ; something (cmd2) ; end
that cmd2 and cmd have the same pgroup.
Add a test to ensure that command substitutions inherit pgroups
properly.
Fixes#6624
Changes it from
```
$fish_color_user: not set in local scope
$fish_color_user: set in global scope, unexported, with 1 elements
$fish_color_user[1]: length=3 value=|080|
$fish_color_user: set in universal scope, unexported, with 1 elements
$fish_color_user[1]: length=7 value=|brgreen|
```
(with the trailing empty line - not just a newline)
to
```
$fish_color_user: set in global scope, unexported, with 1 elements
$fish_color_user[1]: |080|
$fish_color_user: set in universal scope, unexported, with 1 elements
$fish_color_user[1]: |brgreen|
```
Prior to this fix, if job control is enabled but stdin is not a tty, we
would return an error from terminal_maybe_give_to_job which would cause us
to avoid waiting for the job. Instead just return notneeded.
Fixes#6573.
The description for an alias which already has escape sequences will
use backslash escapes for quoting; usually `string escape` can simply
quote it. Use a regex that accepts either escaping style.
Travis puts the commit message in an environment variable, so if it
contains the string `_flag` this would match TRAVIS_COMMIT_MESSAGE.
That happened in ca91c201c3, so the
tests failed.
We simply tighten the regex a little more, and make a commit message
that doesn't include the string.
This allows code of the form `if jobs -q $some_pid` in scripts to check whether a previously started job is still running. Previously this would return the correct value, but also print an error message.
The invalid argument errors will still be printed.
Added test cases for both.
Because `command ./somedir/somecommand` is okay.
Fixes test failure from aa304cbd3d.
Child directories in $PATH are still not suggested, as was the main
intention of the commit that introduced the tests:
8a3cf144f Don't include child directories of $PATH in completions.
We have now entirely switched the script tests to littlecheck.
Note: This adjusts the complete_directories test, because it removes a
directory that was created before by a .in test. There's no real
change in behavior.
This does require the test directory be cleaned, or the tests will fail.
test_util gets to stay for a while longer, because it sets up the
testing env (locale and such).
This, together with the other testX, really just tests some basic
syntax. So let's just call it "basic".
Note that this file uses escaped newlines on purpose, so restyling it
would currently break it. I'm not sure what the best thing to do here is.
This isn't quite the old-style test, but it checks some of the line
continuation stuff.
Note that littlecheck ignores leading whitespace, so testing the
actual indentation requires some more effort.
This test launches two background processes and is sensitive to
interleaving of output. Fix it so that newlines are not output by
the background process.
Hopefully this fixes the flakiness of this test.
If a background process runs a fish function which launches another
background process, ensure that these background procs get different
pgroups. Add a test for it.
This executes `fish --no-execute` a whole bunch of times in order to
find syntax errors in our fish scripts.
tests/ is exempt because it contains syntax errors on purpose.
This is a great idea in principle, but it takes ~4s on my system.
It used to error out when a command wasn't known, even when it was a
function that would only be discovered via autoloading.
Now we just accept that a command doesn't exist when no-execute is
given - we're not gonna execute it anyway.
Also, in the same breath stop counting empty commands after expansion
and empty wildcard expansions as errors - these depend on runtime
values, so we can't verify them without executing.
Fixes#977.
(note that it still executes "time", but that's another commit)
Appending to an fd doesn't really make sense, but we allowed the
syntax previously and it was actually used.
It's not too harmful to allow it, so let's just do that again.
For the record: Zsh also allows it, bash doesn't.
Fixes#6614
Glob ordering is used in a variety of places, including figuring out
conf.d and really needs to be stable.
Other ordering, like completions, is really just cosmetic and can
change if it makes for a nicer experience.
So we uncouple it by copying the wcsfilecmp from 3.0.2, which will
return the ordering to what it was in that release.
Fixes#6593
The `function --on-job-exit caller` feature allows a command substitution
to observe when the parent job exits. This has never worked very well - in
particular it is based on job IDs, so a function that observes this will
run multiple times. Implement it properly.
Do this by having a not-recycled "internal job id".
This is only used by psub, but ensure it works properly none-the-less.
This one tests a bunch of separate stuff, so we put it into a few
different files.
The main, new one is "slices.fish", which tests various index expressions.
This makes two changes:
1. Remove the 'brace_text_start' idea. The idea of 'brace_text_start' was
to prevent emitting `BRACE_SPACE` at the beginning or end of an item. But
we later strip these off anyways, so there is no apparent benefit. If we
are not doing brace expansion, this prevented emitting whitespace at the
beginning or end of an item, leading to #6564.
2. When performing brace expansion, only stomp the space character with
`BRACE_SPACE`; do not stomp newlines and tabs. This is because the fix in
came from a newline or tab literal, then we would have effectively
replaced a newline or tab with a space, so this is important for #6564 as
well. Moreover, it is not easy to place a literal newline or tab inside a
brace expansion, and users who do probably do not mean for it to be
stripped, so I believe this is a good change in general.
Fixes#6564
Just another version of the error. We still want to get a bug if it
ever triggers a *wrong* error, so we still list all the options
instead of going for `.*option:.*Z.*`.
Fixes#6554
Solaris/OpenIndiana/Illumos `rm` checks that and errors out.
In these cases we don't actually need it to be a part of $PWD as
it's just for cleanup, so we `cd` out before.
See #5472
See 1ee57e9244Fixes#6555Fixes#6558
Prior to this fix, fish was rather inconsistent in when $status gets set
in response to an error. For example, a failed expansion like "$foo["
would not modify $status.
This makes the following inter-related changes:
1. String expansion now directly returns the value to set for $status on
error. The value is always used.
2. parser_t::eval() now directly returns the proc_status_t, which cleans
up a lot of call sites.
3. We expose a new function exec_subshell_for_expand() which ignores
$status but returns errors specifically related to subshell expansion.
4. We reify the notion of "expansion breaking" errors. These include
command-not-found, expand syntax errors, and others.
The upshot is we are more consistent about always setting $status on
errors.
macOS `mktemp -d` likes to return symlinks. Guard against that possibility.
That allows the test to succeed when run directly, instead of through the
build target.
It was possible to start the new job and execute `jobs` again before
the job died (or we noticed it did), so the test would fail.
To properly test, we need to ensure the job has been removed. `wait`
should do it.
complete -C'echo $HOM ' would complete $HOM instead of a new token.
Fixes another regression introduced in
6fb7f9b6b - Fix completion for builtins with subcommands
It's now good enough to do so.
We don't allow grid-alignment:
```fish
complete -c foo -s b -l barnanana -a '(something)'
complete -c foo -s z -a '(something)'
```
becomes
```fish
complete -c foo -s b -l barnanana -a '(something)'
complete -c foo -s z -a '(something)'
```
It's just more trouble than it is worth.
The one part I'd change:
We align and/or'd parts of an if-condition with the in-block code:
```fish
if true
and false
dosomething
end
```
becomes
```fish
if true
and false
dosomething
end
```
but it's not used terribly much and if we ever fix it we can just
reindent.
for-loops that were not inside a function could overwrite global
and universal variables with the loop variable. Avoid this by making
for-loop-variables local variables in their enclosing scope.
This means that if someone does:
set a global
for a in local; end
echo $a
The local $a will shadow the global one (but not be visible in child
scopes). Which is surprising, but less dangerous than the previous
behavior.
The detection whether the loop is running inside a function was failing
inside command substitutions. Remove this special handling of functions
alltogether, it's not needed anymore.
Fixes#6480
Store the entire function declaration, not just its job list.
This allows us to extract the body of the function complete with any
leading comments and indents.
Fixes#5285
In particular, this allows `true && time true`, or `true; and time true`,
and both `time not true` as well as `not time true` (like bash).
time is valid only as job _prefix_, so `true | time true` could call
`/bin/time` (same in bash)
See discussion in #6442
Extend the commit 8e17d29e04 to block processes, for example:
begin ; stuff ; end
or if/while blocks as well.
Note there's an existing optimization where we do not create a job for a
block if it has no redirections.
job_promote attempts to bring the most recently "touched" job to the front
of the job list. It did this via:
std::rotate(begin, job, end)
However this has the effect of pushing job-1 to the end. That is,
promoting '2' in [1, 2, 3] would result in [2, 3, 1].
Correct this by replacing it with:
std::rotate(begin, job, job+1);
now we get the desired [2, 1, 3].
Also add a test.
It looks like the last status already contains the signal that cancelled
execution.
Also make `fish -c something` always return the last exit status of
"something", instead of hardcoded 127 if exited or signalled.
Fixes#6444
This was previously required so that, if there was a redirection to a
file, we would fork a process to create the file even if there was no
output. For example `echo -n >/tmp/file.txt` would have to create
file.txt even though it would be empty.
However now we open the file before fork, so we no longer need special
logic around this.
Do this only when splitting on IFS characters which usually contains
whitespace characters --- read --delimiter is unchanged; it still
consumes no more than one delimiter per variable. This seems better,
because it allows arbitrary delimiters in the last field.
Fixes#6406
This adds a test for the obscure case where an fd is redirected to
itself. This is tricky because the dup2 will not clear the CLO_EXEC bit.
So do it manually; also posix_spawn can't be used in this case.
The IO cleanup left file redirections open in the child. For example,
/bin/cmd < file.txt would redirect stdin but also leave the file open.
Ensure these get closed properly.
Prior to this fix, a job would hold onto any IO redirections from its
parent. For example:
begin
echo a
end < file.txt
The "echo a" job would hold a reference to the I/O redirection.
The problem is that jobs then extend the life of pipes until the job is
cleaned up. This can prevent pipes from closing, leading to hangs.
Fix this by not storing the block IO; this ensures that jobs do not
prolong the life of pipes.
Fixes#6397
This did some weird unescaping to try to extract the first word.
So we're now more likely to be *correct*, and the alias benchmark is
about 20% *faster*.
Call it a win-win.
This splits a string into variables according to the shell's
tokenization rules, considering quoting, escaping etc.
This runs an automatic `unescape` on the string so it's presented like
it would be passed to the command. E.g.
printf '%s\n' a\ b
returns the tokens
printf
%s\n
a b
It might be useful to add another mode "--tokenize-raw" that doesn't
do that, but this seems to be the more useful of the two.
Fixes#3823.
This added the function offset *again*, but it's already included in
the line for the current file.
And yes, I have explicitly tested a function file with a function
defined at a later line.
Fixes#6350
Since #6287, bare variable assignments do not parse, which broke
the "Unsupported use of '='" error message.
This commit catches parse errors that occur on bare variable assignments.
When a statement node fails to parse, then we check if there is at least one
prefixing variable assignment. If so, we emit the old error message.
See also #6347
This adds initial support for statements with prefixed variable assignments.
Statments like this are supported:
a=1 b=$a echo $b # outputs 1
Just like in other shells, the left-hand side of each assignment must
be a valid variable identifier (no quoting/escaping). Array indexing
(PATH[1]=/bin ls $PATH) is *not* yet supported, but can be added fairly
easily.
The right hand side may be any valid string token, like a command
substitution, or a brace expansion.
Since `a=* foo` is equivalent to `begin set -lx a *; foo; end`,
the assignment, like `set`, uses nullglob behavior, e.g. below command
can safely be used to check if a directory is empty.
x=/nothing/{,.}* test (count $x) -eq 0
Generic file completion is done after the equal sign, so for example
pressing tab after something like `HOME=/` completes files in the
root directory
Subcommand completion works, so something like
`GIT_DIR=repo.git and command git ` correctly calls git completions
(but the git completion does not use the variable as of now).
The variable assignment is highlighted like an argument.
Closes#6048
Presently the completion engine ignores builtins that are part of the
fish syntax. This can be a problem when completing a string that was
based on the output of `commandline -p`. This changes completions to
treat these builtins like any other command.
This also disables generic (filename) completion inside comments and
after strings that do not tokenize.
Additionally, comments are stripped off the output of `commandline -p`.
Fixes#5415Fixes#2705
PATH and CDPATH have special behavior around empty elements. Express this
directly in env_stack_t::set rather than via variable dispatch; this is
cleaner.
This adds support for `fish_trace`, a new variable intended to serve the
same purpose as `set -x` as in bash. Setting this variable to anything
non-empty causes execution to be traced. In the future we may give more
specific meaning to the value of the variable.
The user's prompt is not traced unless you run it explicitly. Events are
also not traced because it is noisy; however autoloading is.
Fixes#3427
Until now, something like
`math '7 = 2'`
would complain about a "missing" operator.
Now we print an error about logical operators not being supported and
point the user towards `test`.
Fixes#6096
The `--entire` would enable output even though the `--quiet` should
have silenced it. These two don't make any sense together so print an
error, because the user could have just left off the `-q`.
Universal exported variables (created by `set -xU`) used to show up
both as universal and global variable in child instances of fish.
As a result, when changing an exported universal variable, the
new value would only be visible after a new login (or deleting the
variable from global scope in each fish instance).
Additionally, something like `set -xU EDITOR vim -g` would be imported
into the global scope as a single word resulting in failures to
execute $EDITOR in fish.
We cannot simply give precedence to universal variables, because
another process might have exported the same variable. Instead, we
only skip importing a variable when it is equivalent to an exported
universal variable with the same name. We compare their values after
joining with spaces, hence skipping those imports does not change the
environment fish passes to its children. Only the representation in
fish is changed from `"vim -g"` to `vim -g`.
Closes#5258.
This eliminates the issue #5348 for universal variables.
Consider a group of short options, like -xzPARAM, where x and z are options and z takes an argument.
This commit enables completion of the argument to the last option (z), both within the same
token (-xzP) or in the next one (-xz P).
complete -C'-xz' will complete only parameters to z.
complete -C'-xz ' will complete only parameters to z if z requires a parameter
otherwise, it will also complete non-option parameters
To do so this implements a heuristic to differentiate such strings from single long options. To
detect whether our token contains some short options, we only require the first character after the
dash (here x) to be an option. Previously, all characters had to be short options. The last option
in our example is z. Everything after the last option is assumed to be a parameter to the last
option.
Assume there is also a single long option -x-foo, then complete -C'-x' will suggest both -x-foo and
-xy. However, when the single option x requires an argument, this will not suggest -x-foo.
However, I assume this will almost never happen in practise since completions very rarely mix
short and single long options.
Fixes#332
This stops reading argument names after another option appears. It does not break any previous uses and in fact fixes uses like
```fish
function foo --argument-names bar --description baz
```
* `function` command handles options after argument names (Fixes#6186)
* Removed unneccesary test
Meaning empty variables, command substitutions that don't print
anything.
A switch without an argument
```fish
switch
case ...
end
```
is still a syntax error, and more than one argument is still a runtime
error.
The none-argument matches either an empty-string `case ''` or a
catch-all `case '*'`.
Fixes#5677.
Fixes#4943.
This test uses universal variables, and so it can fail when run
multiple times.
It might be a good idea to do this in general, but for now let's just
try it here.
Previously when propagating explicitly separated output, we would early-out
if the buffer was empty, where empty meant contains no characters. However
it may contain one or more empty strings, in which case we should propagate
those strings.
Remove this footgun "empty" function and handle this properly.
Fixes#5987
I tested this manually (`littlecheck.py -s fish=fish tests/checks/eval.fish`) from the base directory, which means I got
"tests/checks/eval", while the real test gets "checks/eval".
I then reran `make test_fishscript`, but that didn't pull in the
updated test - we should really handle that better.
I'm gonna add more tests to this and I don't want to touch the old stuff.
Notice that this needs to have the output of the complete_directories
test adjusted because this one now runs later.
That's something we should take into account in future.
This required a bit of thinking.
What we do is we have one test that fakes $HOME, and then we do the
various config tests there.
The fake config we have is reused and we exercise all of the same codepaths.
This is a bit weird sometimes, e.g. to test the return status (that
fish actually *returns $status*), we use a #RUN line with %fish
invoking %fish, so we can use the substitution.
Still much nicer.
The missing scripts are those that rely on config.
This is a nice test (ha!) for how this works and what littlecheck can
do for us.
1. Input is now the actual file, not "Standard Input" anymore. So
any errors mentioning that now include the filename.
2. Regex are really nice for filenames, but especially for line
numbers
3. It's much nicer to have the output where it's created, instead of
needing to follow three files at the same time.
This adds support for .check files inside the tests directory. .check
files are tests designed to be run with littlecheck.
Port printf test to littlecheck and remove the printf.in test.
