This was always awkward as fish script, and had problems with
interrupting the autoloading.
Note that we still leave the old function intact to facilitate easier
upgrading for now.
Fixes#7145.
Current firefox-developer-edition (i.e. the beta) blocks here.
This is awful and bad, but we can easily work around it by just using
a thread.
Blergh
Fixes#7158
Add a helper function to check if the user is root. This function can be
useful for the prompts for example. Modify the prompts made root checked
to use the function instead. Add also the support of Administrator like
a root user.
Fixes: #7031
I really kinda hate how insistent clang-format is to have line
breaks *IFF THE LINE IS TOO LONG*.
Like... lemme just add a break if it looks better, will you?
But it is the style at this time, so we shall tie an onion to our
belt.
* completions/git: Show all accepted values with git config
Finally closes#3812.
Acceptable values are generated using `git help --config`
* completions/git: Show config value as description for git config
* completions/git: Handle multiline config values
When completing `git config` only display the first
line of config value as description if it is
multiline, appended with an ellipsis.
* Fix#7113 (cannot call help using msys2), correct a few regexes.
* Use regex instead of glob-style matching
* Match `\.exe$` instead of `cmd\.exe$` for WSL
* Match `\.exe(\s+|$)` instead of `\.exe$` and `cmd\.exe$`
* Fix a few regexes
This allows cygstart to be manually set as a browser, with or without arguments
`adb` shell by default sends stderr from the command to stdout, so that `adb pull nonexistent<tab>` will show the error message from the `find` command. `>` must be escaped so that redirection is done inside the command executed by `adb shell`.
- Complete signals with --on-signal
- Complete variables with --on-variable and --inherit-variable
- Complete event handlers with --on-event
- Complete commands with --wraps
- Add `complete` spec for --inherit-variable
This had this weird "pass along the sha, then check" logic to it which
is entirely unnecessary.
This function just says when something is staged, nothing more. Why
that is you can figure out for yourself.
This makes it easier to call this function, and it no longer prints an
empty line if nothing is staged.
This was intended to stop showing the user "unimportant" variables,
but it just didn't complete them entirely, even if the current token
starts with a dunder (or `fish` of all things!).
Because completions sort `_` last, let's just complete these always
and let the user filter them.
This wasn't added to the prompt status order, so it was computed and
then not used for the informative prompt.
We still check later if we should compute it, so this is harmless if
showstashstate is unset.
Fixes#7136.
The `snap interfaces` command prints out a deprecation notice to stderr. This breaks the completion
support for interfaces, connect and disconnect commands like so:
```
$ snap connect <TAB>error: no interfaces found
error: no interfaces found
...
'snap interfaces' is deprecated; use 'snap connections'.
'snap interfaces' is deprecated; use 'snap connections'.
'snap interfaces' is deprecated; use 'snap connections'.
error: no interfaces found
error: no interfaces found
'snap interfaces' is deprecated; use 'snap connections'.
```
Ultimately, the snap command completion should switch to `snap connections`. However, for now try to
workaround the notice by redirecting stderr.
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
On my system this printed just "Description:" without any additional
characters, so this awkward `sed` didn't match and produced *all
packages on one line*.
Tbh this should probably be rewritten, but first we'd have to find a
way to get proper output here.
* docs/faq: Mention prepend_sudo
[ci skip]
* __fish_prepend_sudo: Use $history[1] if commandline is empty
Currently, if you press alt+s with an empty commandline, it inserts
"sudo", which seems fairly useless.
Now, it inserts "sudo " followed by the last history entry, which
makes it a replacement for `sudo !!`.
* docs
This reverts commit 1b0ec21773.
"Interactive" has multiple meanings here, one of them being "the whole shell" is interactive, which `status is-interactive` tests, and one "this interaction is interactive", which happens when `read`ing in a script.
Fixes#7080.
* Add an "_" builtin to call into gettext
We already have gettext in C++ (if available), so it seems weird to
fork off a command to start it from script.
This is only for fish's own translations. There's no way to call into
other catalogs, it just translates all arguments separately.
This is faster by a factor of ~1000, which allows us to call
translations much more, especially from scripts.
E.g. making fish_greeting global by default would hurt cost-wise,
given that my fish starts up in 8ms and just calling the current `_`
function takes 2ms, and that would have two calls.
Incidentally, this also makes us rely on a weirdly defined function
less, so it:
Fixes#6804.
* docs: Add `_` docs
Let's see if that filename works out.
* Reword _ docs
This is a function you can either execute once, interactively, or
stick in config.fish, and it will do the right thing.
Some options are included to choose some slightly different behavior,
like setting $PATH directly instead of $fish_user_paths, or moving
already existing components to the front/back instead of ignoring
them, or appending new components instead of prepending them.
The defaults were chosen because they are the most safe, and
especially because they allow it to be idempotent - running it again
and again and again won't change anything, it won't even run the
actual `set` because it skips that if all components are already in.
Fixes#6960.
fish_git_prompt encloses its output in brackets, however this can be changed by supplying a format string to it, i.e. `fish_git_prompt %s`.
However when using `fish_vcs_prompt` there's no way to pass on the arg to fish_git_prompt, so you need to manually remove it.
fish_hg_prompt doesn't have the same format string support as fish_git_prompt, but I suppose it could be added later if needed.
We don't need to call it if a job was stopped, because in that case
read_i() will fire fish_prompt already, because the newly stopped job
was probably a foreground job.
Fixes#1018
The default implementation will not print any output in that case, but this provides users with additional flexibility when it comes to customising the shell's behaviour.
This allows users to customise the behaviour of the shell by redefining the function. This is similar to how fish_title or fish_greeting behave, where the default implementation can be easily overridden.
The function receives as arguments the job id, command line, signal name and signal description.
Since 4414d5c888 (in fish 3.0.0) we
don't autoload completions if the command doesn't exist.
So there is no need to check inside the scripts anymore.
Whats more, a few (like pip and cabal) checked `command -q` instead of
`type -q`, meaning they'd fail if someone used a function instead of a
command of that name.
If the *command* actually needs to exist, checks like that are still
warranted, like in `npm` where aliasing it to `nvm` is popular.
A teensy additional bit: Make `sysctl -w` the same as `sysctl
--write`. That description was bogus.
At the moment calling __fish_prepend_sudo multiple times does not toggle
sudo, and also unnecessarily uses the `-c` flag to `commandline` to see if
the first token on the commandline is "sudo".
This change removes the `-c` switch and also toggles "sudo" on multiple
calls to __fish_prepend_sudo, while maintaining the cursor position and
while maintaining any spaces between "sudo" and the next token on the
commandline.
The local-exported variable will have disappeared by the time the
function is called.
"-V"/"--inherit-variable" is meant for something like this.
Fixes#7011
The completions for help know many more help topics, it makes no sense
to whitelist them here.
Fix anchor links for tutorial sections.
Remove some dead code: the "man" branch was unreachable because of the
earlier (__fish_print_commands) case.
Add missing options:
--path causes the specified variable to be treated as a path variable, meaning it will automatically be split on colons, and joined using colons when quoted (echo "$PATH") or exported.
--unpath causes the specified variable to not be treated as a path variable. Variables with a name ending in "PATH" are automatically path variables, so this can be used to treat such a variable normally.
[ci skip]
* Fix issue if md5sum is used instead of md5
Both have a different output which results in different array sized
Signed-off-by: Ron Gebauer <ron.gebauer@raytion.com>
* Add feedback
Signed-off-by: Ron Gebauer <ron.gebauer@raytion.com>
* Fix manpath handling in create_manpage_completions.py
...as well as do some (very!) light cleanup.
Currently, `create_manpage_completions.py` does not properly
understand/respect the `$MANPATH` variable. One important feature of
`$MANPATH` is that an empty component (i.e. the trailing : in
`foo:bar:`) expands to the 'default' or 'system' path -- that is to say,
the path that would be used if `$MANPATH` was unset. This allows the
user to extend the manpath without clobbering it, and has been a feature
many Unices have included for years.
The current implementation blindly uses the `$MANPATH` variable if it
exists, which does not allow for this behaviour -- to expand the
variable correctly, an external program must be invoked. Therefore, we
first shell out to the 'proper' (read: best guess) external program. If
that fails, we can then try to use `$MANPATH` directly/literally.
Finally, if both of those are impossible, we can fall back to some
common paths from widely used operating systems.
Note that the `man.conf` parsing has been removed: this is because while
many 'traditional' Unices (BSDs, Solaris, macOS) support this file, only
macOS actually ships a file -- most other Unices use a `conf.d`-style
layout and supporting that from our Python is impractical and silly at
best. On GNU (read: Linux) systems, `mandb` uses `/etc/man_db.conf` with
slightly different syntax and sematics. As this code-path has bitrotted
(and likely never worked, anyway), just remove it.
`create_manpage_completions.py` looks like it has suffered a lot of
confusion and bitrot in general over the last few years -- and is
overdue for a major refactoring. I am quite interested in tackling this,
but I plan to wait until the go-ahead to drop support for Python 2 is
given, as a major refactor/rewrite that still supports Python 2 (and
thus ignores the ergonomic/API/syntax improvements of Python 3) does not
make sense to me.
Related: #5657
It would probably be good to revisit `man.fish` once again when a
comprehensive refactor happens: hopefully every permutation of
`man`/`$MANPATH` could be documented as part of that effort.
* Restore /etc/man.conf parsing
I was not aware that this codepath was used -- since it appeared that it
would throw an error when it was reached. Redo it, using regex, and
support parsing NetBSD man.conf as well (untested).
* Fix create_manpage_completions.py under Python 2
It removed $KONSOLE_PROFILE_NAME and added $KONSOLE_VERSION.
Let's assume if $KONSOLE_PROFILE_NAME is set we use the old sequences,
if not we use the new ones.
This reverts commit 535845861a.
That commit introduced a bug where tab-completing commands no longer
prints their descriptions, unless there is an exact match.
This was a weird one. We split the aliases correctly even with
multiple lines, but then broke it all again when we just printed the
description.
Note that it would be possible to use `string split0` here, but since
anything longer than a line is likely too long for a description
anyway we don't bother.
Fixes#6946.
When this switched over from directly piping commandline to storing
its output and using printf, I inadvertently always added a trailing
newline. That's probably annoying.
Note that this will now always *remove* a trailing newline (because
the command substitution does). That will barely make a
difference (because trailing newlines are quite unusual in the
commandline) and will probably feel better than keeping it - we could
even make a point of removing trailing whitespace in general.
Fixes#6927
This updates the behavior of tilde to match the behavior found in vim.
In vim, tilde toggles the case of the character under the cursor and
advances one character. In visual mode, the case of each selected
character is toggled, the cursor position moves to the beginning of
the selection, and the mode is changed to normal. In fish, tilde
capitalizes the current letter and advances one word. There is no
current tilde command for visual mode in fish.
This patch adds the readline commands `togglecase-letter` and
`togglecase-selection` to match the behavior of vim more closely. The
only difference is that in visual mode, the cursor is not modified.
Modifying the cursor in visual mode would require either moving it in
`togglecase-selection`, which seems outside its scope or adding
something like a `move-to-selection-start` readline command.
The description for an alias which already has escape sequences will
use backslash escapes for quoting; usually `string escape` can simply
quote it. Use a regex that accepts either escaping style.
A minor follow-up to #6866 (e658a88ab0).
These file types should be properly handled by other unzip flavors too,
regardless of Debian's/non-Linux Unixes' idiosyncrasies.
I've been dealing with these a lot recently (android dev...), and it's
pretty annoying that unzip completions don't recognize them (They're
just zip files with a weird file extension).
Make is much better than us at figuring out which makefile to use,
just pass through the relevant parameters.
Also previously they didn't work at all for Makefiles like the one in
https://github.com/jonas/tig, for example.
I kinda hate how fussy clang-format is. It reflows text
constantly (line limit), forces things onto one line *except* when
they're too long, and wants to turn this:
```c++
return true;;
```
into this:
```c++
return true;
;
```
instead of, you know, eliminating the second semicolon?
Anyway, it is what it is and we use it, I'll just look into getting some
more slack.
Add completion for terraform worskpace.
The terraform env command is deprecated.
The terraform workspace command should be used instead.
"terraform env" will be removed in a future Terraform version.
Fixes#6798
This re-adds some false positives: functions, builtins and abbreviations
are suggested after commands like sudo but I don't think anyone had
complained about that.
The default indicator ruined alignment, which is a major design
feature here.
Handle it by including the mode indicator in the prompt proper.
Fixes#6802.
[ci skip]
Many people have mentioned wanting support for changing / yanking /
deleting between "" and '', meaning the commands `ci' ci" yi' yi" di' di"`,
so this adds that support in a generic, and thus potentially confusing way.
The concept is that we check for the character backwards and forwards
before making the selection. Unfortunately, this will also work for *any*
character that isn't `w` or `W`, so `cia` could change everything between
two `a` characters.
Looking through the [bind documentation](https://fishshell.com/docs/current/cmds/bind.html)
and input handler at `src/input.cpp`,
this is the best possible solution I could come up with until
`forward-jump` and `backward-jump` can accept input in the call to `bind`,
and not just from stdin, meaning we can write a binding as:
```
bind di\" backward-jump-till \" and repeat-jump-reverse ...`
```
If that were done, then other commands such as `di)` to go between `()` would
be possible.
There are also some added `y` bindings not part of #6648.
Let me know if you need anything else.
Add completions for `downgrade` tool
Add new `--installed` option for printing Arch packages
Change Arch Linux package related completions to use `--installed`
add newline
The output of
systemctl list-units
seems to include a marker of '●' or '*' for some units, even if the
output is not going to a terminal and "--no-legend" and "--no-pager"
are given. This appears
to be a recent development, and there does not appear to be a flag to
disable it.
So we simply filter it out in the completions to once again hopefully
offer the actual units.
Fixes#6740
Even if $DISPLAY is unset, xdg-open can be useful, and on systems that
have xdg-open, "open" is most likely some god awful outdated thing
called "openvt" elsewhere.
Fixes#6739
[ci skip]
Fixes#6138
Naturally this does not work for many other editors/aliases,
but it's still nice that we can make it work for some common
editors without requiring any configuration.
Of course this approach is not terribly flexible; but it's
alwyas possible to just wrap edit_command_buffer and set an
EDITOR that knows about the cursor position. It doesn't
feel important enough to add a configuration option.
Using a local variable means we have to expand it when loading the
completion. With this approach, the content of the variable will be
expanded, so escape it.
