In writing the completion script for openocd I found the need to
complete paths at the command-line as if they were relative to a
path other than the current $PWD. Given that `$PWD` is currently
global in fish (i.e. no side-effect free `cd` within a subshell)
this is probably good to have for other completions too.
This also fixes a bug in support for explicitly supplying the
description for completions via a `$argv` parameter, which prefixed
the description with `\t` (which is correct) except it did so in
the local scope within an `if` statement, meaning the changes never
had any effect and in the output the description was directly
concatenated to the completions, instead of separated by a tab.
Incorrectly assumed that pandoc uses XDG_CONFIG_HOME, it turns out the
path is hard-coded as $HOME/.pandoc unless explicitly otherwise
specified in the command-line.
Don't attempt to complete against package names if the user is trying to
enter a switch to speed things up.
Also work around #5267 by not wrapping unfiltered `all-the-package-name`
calls in a function.
We do a bunch of escaping before to make `eval` work, and that needs to be removed as well or fragment-urls don't work.
This reverts commit e9568069a7.
Use clang/clang++'s own autocompletion support to complete arguments. It
is rather convoluted as clang generates autocompletions for a portion of
the current token rather than the entire token, e.g. while `--st` will
autocomplete to `--std=` (which is fine by fish), `--std=g` will
autocomplete to `gnu...` without the leading `--std=` which breaks fish'
support for the completion.
Additionally, on systems where clang/clang++ is the system compiler
(such as FreeBSD), it is very often for users to invoke a newer version
of clang/clang++ installed as clang[++]-NN instead of clang. Using a
monkey-patched version of `complete -p` to support that without breaking
(future) completions for commands like `clang-format`.
Closes#4174.
If you're using the old binding that only clears the commandline and
doesn't preserve its contents and start a new line, you can use
```fish
bind \cc "commandline -f cancel; commandline ''"
```
instead.
Closes#4298.
For some weird reason we only used $editor if it wasn't empty, but
then failed to fail if it was.
This will now print an error and use fish, just like if the $EDITOR
value is invalid in any other way.
Fixes#5257.
This is a wrapper that calls kitty to dynamically provide completions,
as generated by kitty itself, via `kitty + complete setup fish`.
ref: https://sw.kovidgoyal.net/kitty/#fish
The hg prompt walks up the directory hierarchy to decide if we are in a
repo subdirectory. Because hg is an external command, it resolves symlinks.
Switch to using pwd -P so hg and fish will have the same view of the hg repo.
Based on comment:
https://github.com/fish-shell/fish-shell/pull/5190#issuecomment-421912360
Mostly resolves#4862, though there remains the lingering question of
whether or not to emit a warning to /dev/tty or stderr when a
non-literal-zero index evaluates to zero.
This allows for marking certain bindings as part of a preset, which allows us to
- only erase those when switching presets
- go back to the preset binding when erasing a user binding
- only show user customization if requested
- make bare bind statements in config.fish work (!!!11elf!!!)
Fixes#5191.
Fixes#3699.
- Add support for:
- Jumping to the character before a target.
- Repeating the previous jump (same direction, same precision).
- Repeating the previous jump in the reverse order.
- Enhance vi bindings.
The Informative VCS sample prompt currently sets the `__fish_git_prompt_char_conflictedstate` variable which is unused.
It should instead set the `__fish_git_prompt_char_invalidstate` variable.
Ordering of directories above files was introduced in a recent change to
the same script. By default it does not matter as completions are sorted
by fish internally, but this allows the use of `-k` to sort files before
directories (or piped to `sort -r` for vice-versa).
Use `apt-cache show` instead of `apt-cache packagenames` to efficiently
print package names and a brief description instead of the placeholder
(localized) "Package" text that was previously printed. This applies to
both available and installed packages (for inistall and remove operations,
respectively).
TODO: update `__fish_print_packages` for non-debian platforms to do the
same.
When listing packages already installed (e.g. for use with `apt remove
...`), do not consider packages return by `dpkg --get-selections` with
state 'deinstall'.
Previously the `string replace` pattern was matching both 'install' and
'deinstall' packages.
Utilized the `--install` flag added in commit #8c09d6e.
Limit `eopkg remove/autoremove/check ...` completions to installed packages.
Limit `eopkg install/upgrade/info ...` completions to available packages.
Prior to this fix, __fish_describe_command would error if the
input contained any special characters, because it would be interpolated
into a regex. Hack in a guard to do nothing if the input contains
anything other than [a-zA-Z0-9_ ]
* update nim.fish sample prompt
- Use an helper function to wrap informations
- Add VIRTUAL_ENV infos, if any
- Add __fish_git_prompt, wrapped for the theme
- Add comments
- Remove ASCII failback symbols for tty
(no more useful for me, but if someone really needs it, just ask)
* fish.nim: test -n __fish_git_prompt
Added a new flag `--installed` via `argparse` to `__fish_print_packages`
which indicates that only installed packages should be listed.
TODO: Other non-debian/apt platforms should take advantage of this flag/
behavior as well.
It was only introduced in 2.16, which was released in January 2018.
Instead, we just use a bare "--ignored", which is equivalent to "--ignored=traditional".
The difference to "--ignored=matching" mode shouldn't matter to us here.
Fixes#5074.
Executes `whatis` safely, returns at most one line, and strips the name
of the command from the start of line, returning a value fit for use as
the description parameter for a completion argument value.
Fixes
- Use the actual path when skipping unusable paths to fix all Include
directives being skipped when there is no ~/.ssh directory
- Prevent "No matches for wildcard" message
Improvements
- Skip paths that are directories since we only want files
- Remove `cd` as it is not needed
__fish_complete_suffix assumed that the only literal . in a path
would be the . before an extension, and stripped accordingly. This
behavior has been there for a long time, but broke many things
including completion of relative paths and completion of paths with
a literal . in a directory name.
__fish_complete_suffix does not just complete extensions (or at the
very least, it no longer does just that) but rather any suffix, so
isolating the path name without the extension was unnecessary in all
cases.
I'm not sure what was wrong with the old syntax, but I needed to switch
the outer quotes to ' and the inner quotes to " in order for the
completions to work when they weren't explicitly sourced.
Additionally, realized that the overload for __fish_complete_suffix can
be used to get the filtered list of kernel modules from /boot/kernel in
the initial run.
Allows the most painful of curl's arguments to be completed by fish by
restoring file-based completions for paths prefixed with `@` (which are
typically used after parameters like --data).
With a blank $suff (i.e. complete all files), __fish_complete_suffix
returned directories twice, once with the trailing `/` and once without.
This fixes that, and additionally speeds up the code by no longer
shelling out to `sort -u` as we no longer rely on brace expansion to
enumerate directories and files simultaneously.
In general, this behavior would occur when a directory exists that
matches the suffix search pattern (so a dir named 'foo.bar' with a
search pattern '.bar' would return 'foo.bar' twice).
Runtime has dropped from ~22ms to ~8ms on my machine, while also
returning more correct results.
This allows snippets to use everything that is defined in config.fish,
which is our _base_ initialization.
Among other things, it enables snippets to use $PATH as it will appear
in the user's config.fish, or even to change $PATH.
Also, this is how it was in 2.7.1 and before (with the small change
that abbrs were upgraded after).
As defined in the `go help packages`:
Many commands apply to a set of packages:
go action [packages]
Usually, [packages] is a list of import paths.
This patch introduces automatic lookup of said packages from GOPATH
using `go list`, and provides them as options go subcmds.
I'm not sure what was up with the old completions,
`$__fish_service_commands` is not set anywhere and completions for the
command (not the service) were not being generated on my machine.
macOS and (AFAICT) most Linux distributions ship with the Info-ZIP
version of unzip, which has the `unzip -h` flag; but other
implementations of unzip do not necessarily have it (i.e. FreeBSD).
`unzip` under FreeBSD does not support `unzip -h`. Under both Linux and
FreeBSD, `unzip -v` presents the list of options, though. Using this
instead of `unzip -h` to detect the Debian-patched version of the
Info-ZIP unzip program.
This prints an escape sequence, so it can break scp or similar when
someone has an unqualified
fish_vi_key_bindings
in config.fish and happens to run a terminal that can set the cursor.
These completions are apparently based on an auto-generated version,
so there's a whole bunch of rewording to be done here.
Also for some reason some of the options are mentioned more than once?
Under FreeBSD, as annoying as it is, switches must directly follow the
command or subcommand in question, and cannot come after actual payload
argument. Calling `zpool get all -H` instead of `zpool get -H all`
caused error messages to be spewed to the console under FreeBSD when
simply completing `zfs <TAB>`, this should fix that. The change should
also be compatible with other operating systems (namely Linux) that
don't have this requirement, as they (generally) allow arguments to come
before _or_ after the primary non-switch argument (though I do not have
access to a zfs-enabled Linux machine to test this).
Previously, trying to complete a token with any of these
expansion-related characters would cause the completion to return no
results, as it would emit expanded values which weren't matched by the
autocompleter.
Only the first non-switch parameter to python must be a .py file, but
everything thereafter is "just another argument". This enables file
completions for 2nd+ arguments.
Akin to __fish_complete_suffix, __fish_complete_directories now attempts
to complete the current commandline token if no token is explicitly
passed in as an argument.
The prompt is a fallback that is overridden via a function file
anyway.
Do that with the title as well, so we can use just builtins.
This removes error messages when $fish_function_path is borked.
Turns out that `make -pn` actually takes a while - about 300ms on
fish's makefile.
That's quite a bit of time just to throw away the output and use the
exit code.
So we just check for "GNU" in the version string.
It would be nice to just _do_ the completion and fall back on the
BSD-style if it doesn't work, but that is tricky to do with the pipe
to `awk` - the awk expression actually does not fail if `make` does
not print output.
And I don't know enough about awk to change that.
While this is a bit faster (mostly because it needs less processing on fish's side),
it lacks the neat description bit and the ":/" stuff doesn't work.
The boost is also not large in absolute terms (a few milliseconds).
This reverts commit 1f8e4dad9f.
This uses the same logic that git uses to determine the satus of files
and doesn't require any parsing on our end. Brings in support for
relative paths (such as `git add ../f<TAB>`). Should be faster and more
reliable than manually parsing porcelain status.
This doesn't support as many cases as the old `__git_ls_files` function
did (e.g. `renamed` is not supported, nor is `added`), both of which
_can_ be implemented on top of the new logic - but neither of which were
actually being used, anyway.
Usefulness is decreased by #4970, speed still bottlenecked by #4969.
cc @faho
This is based on what the official git completions do, and it's quite
fast.
Also only complete files after a "--" separator for `checkout`.
Fixes#4858.
This is much quicker - on the order of 100ms vs 50ms.
We shorten to 10 characters, which is statistically suitable - 3 out
of 600k commits in the linux kernel need 11 characters.
For usage in completion scripts.
Unlike `__fish_is_first_token` (which is probably not correctly named),
`__fish_is_first_arg` returns true regardless of whether existing tokens start with `-`
or not, to be used when an arg cannot be used with any other argument.
`__fish_prev_arg_in` is similar to `__fish_seen_...` but it explicitly
tests the preceding token only, for arguments that take only a single
parameter.
As it turns out, for some terminals backspace is \b but only when
preceded by \e.
All this makes about as much sense as the english language.
Fixes#4955.
The previous completion generation was broken for several reasons:
* ./foo would break detection of suffix due to the leading . being
interpreted an extension marker,
* ./foo would be completed as foo, which would be excluded from
matching inrcomplete.cpp
Using `git for-each-ref` both simplifies the code (no need to deal
with detached heads anymore) and speeds it up.
With 1600 branches, the time goes from ~48ms to ~16ms.
- fix capitalization
- shorten descriptions
- implement subcommand shortcuts
- add arg completion for 'limit' and 'depth' switches
- improve arg completion for list subcommand in case of -p switch
bower was calling `__fish_should_complete_args`, the old name for
`__fish_should_complete_switches.`
yarn was parsing bower.json instead of package.json.
To be used by completions to directly determine whether it is either
possible or preferable to complete a switch (instead of a subcommand),
(presuming that switches must come before subcommands).
* __fish_can_complete_switches: we are in a position where a switch may
be placed.
* __fish_should_complete_switches: we're in a position to accept a
switch and the current token starts with `-` so we have no choice but
to do so.
Selectively reverts 156d4fb9b9.
`all-the-package-names` is still used to generate completions for `npm`
if it is installed, but it is not manually installed nor updated. It is
now the user's responsibility to do both, and it must be installed
globally.
`npm search` was _way_ too slow to be used for dynamic completions, so
using a cached list of all avaialable NPM packages to match against.
This is a bit brave for a fish completion, but the npm package
`all-the-package-names` has a list of, well, all the package names
avaialable for installation via the default npm registry. Installing a
copy locally to $HOME/.cache/fish/npm_completions and using that to
search for packages matching the tokenized command line.
Preference would be to call `__update_atpm` in the background, but that
emits an ugly "job has completed" message..
Should also use this for completions for `yarn add`.
Instead, attempt to extract the message that _would_ be displayed on
execution of `./configure --help` by relying on some markers present in
autoconf-generated configure files.
As measured with 'hyperfine' on a laptop running in reduced frequency
power savings mode, `fish -c "__fish_parse_configure ./configure"`
runtime dropped from ~1.25s to ~0.8ms, which is inline with the
previously observed ~350ms execution time for `./configure --help`.
fish's own startup time is approximately 75ms before parsing begins.
Still very slow, but much better.
This relies on the new `read --line/-L` support as an entire parser for
the output of `./configure --help` was written in fishscript. Also
doesn't work without 72f32e6d8a7905b064680ec4b578c41dea62bf84.
The completion script is slow... a function of both the autotools
configure script itself being written in a shell script combined with a
fishscript output parser.
fish's own `./configure --help` takes around 350ms to execute, while
`__fish_parse_configure ./configure` (which runs that behind the scenes)
takes around 660ms to run, all-in-all - a not insignificant overhead.
Output can be cached (based off of ./configure hash or mtime) in the
future if this is a big deal.
The default completions that autojump ships with for fish are broken
(emitting output like "1\___\#...") as they use hackes to work around
the previous lack of `complete -k`. The history-based autojump
completions fully replace it.
The job expansion wrapper was swallowing `-n` (and presumably `-e` and
others) when that was the literal argument we needed to emit. Using
`printf %s ...` instead.
Now the description includes the variable scope, `set [-e] -[Ugl]`
completions only provide variables matching that scope, and completions
that shouldn't be modified are hidden from the user. Completions that
are often modified but rarely unset (`fish_*` variables) are omitted
from `set -e` completions.
A new helper function `__fish_seen_argument` has been added that makes
it easy to only provied completions for a specific flag.
Launch `cmd.exe /c "start URL"` under WSL for both `fish_config` and
`help`. This works around #4299 but does not address the underlying
issue (#1132).
fish reads paths out of /etc/paths.d. Prior to adbaddf it did
this on every shell invocation; with adbaddf it does so on only login
shells. This change wasn't justified so let's revert this behavior.
(and /etc/paths.d/*)
Do so by emulating the behavior of /usr/libexec/path_helper for login
shells, matching the behavior in /etc/profile.
Also add a path_helper command to reproduce the behavior of
/usr/libexec/path_helper for fish.
This also handles setting MANPATH if necessary.
Fixes issue #4336
