* completions/git: Show all accepted values with git config
Finally closes#3812.
Acceptable values are generated using `git help --config`
* completions/git: Show config value as description for git config
* completions/git: Handle multiline config values
When completing `git config` only display the first
line of config value as description if it is
multiline, appended with an ellipsis.
* Fix#7113 (cannot call help using msys2), correct a few regexes.
* Use regex instead of glob-style matching
* Match `\.exe$` instead of `cmd\.exe$` for WSL
* Match `\.exe(\s+|$)` instead of `\.exe$` and `cmd\.exe$`
* Fix a few regexes
This allows cygstart to be manually set as a browser, with or without arguments
`adb` shell by default sends stderr from the command to stdout, so that `adb pull nonexistent<tab>` will show the error message from the `find` command. `>` must be escaped so that redirection is done inside the command executed by `adb shell`.
- Complete signals with --on-signal
- Complete variables with --on-variable and --inherit-variable
- Complete event handlers with --on-event
- Complete commands with --wraps
- Add `complete` spec for --inherit-variable
This had this weird "pass along the sha, then check" logic to it which
is entirely unnecessary.
This function just says when something is staged, nothing more. Why
that is you can figure out for yourself.
This makes it easier to call this function, and it no longer prints an
empty line if nothing is staged.
This was intended to stop showing the user "unimportant" variables,
but it just didn't complete them entirely, even if the current token
starts with a dunder (or `fish` of all things!).
Because completions sort `_` last, let's just complete these always
and let the user filter them.
This wasn't added to the prompt status order, so it was computed and
then not used for the informative prompt.
We still check later if we should compute it, so this is harmless if
showstashstate is unset.
Fixes#7136.
The `snap interfaces` command prints out a deprecation notice to stderr. This breaks the completion
support for interfaces, connect and disconnect commands like so:
```
$ snap connect <TAB>error: no interfaces found
error: no interfaces found
...
'snap interfaces' is deprecated; use 'snap connections'.
'snap interfaces' is deprecated; use 'snap connections'.
'snap interfaces' is deprecated; use 'snap connections'.
error: no interfaces found
error: no interfaces found
'snap interfaces' is deprecated; use 'snap connections'.
```
Ultimately, the snap command completion should switch to `snap connections`. However, for now try to
workaround the notice by redirecting stderr.
Signed-off-by: Maciek Borzecki <maciek.borzecki@gmail.com>
On my system this printed just "Description:" without any additional
characters, so this awkward `sed` didn't match and produced *all
packages on one line*.
Tbh this should probably be rewritten, but first we'd have to find a
way to get proper output here.
* docs/faq: Mention prepend_sudo
[ci skip]
* __fish_prepend_sudo: Use $history[1] if commandline is empty
Currently, if you press alt+s with an empty commandline, it inserts
"sudo", which seems fairly useless.
Now, it inserts "sudo " followed by the last history entry, which
makes it a replacement for `sudo !!`.
* docs
This reverts commit 1b0ec21773.
"Interactive" has multiple meanings here, one of them being "the whole shell" is interactive, which `status is-interactive` tests, and one "this interaction is interactive", which happens when `read`ing in a script.
Fixes#7080.
* Add an "_" builtin to call into gettext
We already have gettext in C++ (if available), so it seems weird to
fork off a command to start it from script.
This is only for fish's own translations. There's no way to call into
other catalogs, it just translates all arguments separately.
This is faster by a factor of ~1000, which allows us to call
translations much more, especially from scripts.
E.g. making fish_greeting global by default would hurt cost-wise,
given that my fish starts up in 8ms and just calling the current `_`
function takes 2ms, and that would have two calls.
Incidentally, this also makes us rely on a weirdly defined function
less, so it:
Fixes#6804.
* docs: Add `_` docs
Let's see if that filename works out.
* Reword _ docs
This is a function you can either execute once, interactively, or
stick in config.fish, and it will do the right thing.
Some options are included to choose some slightly different behavior,
like setting $PATH directly instead of $fish_user_paths, or moving
already existing components to the front/back instead of ignoring
them, or appending new components instead of prepending them.
The defaults were chosen because they are the most safe, and
especially because they allow it to be idempotent - running it again
and again and again won't change anything, it won't even run the
actual `set` because it skips that if all components are already in.
Fixes#6960.
fish_git_prompt encloses its output in brackets, however this can be changed by supplying a format string to it, i.e. `fish_git_prompt %s`.
However when using `fish_vcs_prompt` there's no way to pass on the arg to fish_git_prompt, so you need to manually remove it.
fish_hg_prompt doesn't have the same format string support as fish_git_prompt, but I suppose it could be added later if needed.
We don't need to call it if a job was stopped, because in that case
read_i() will fire fish_prompt already, because the newly stopped job
was probably a foreground job.
Fixes#1018
The default implementation will not print any output in that case, but this provides users with additional flexibility when it comes to customising the shell's behaviour.
This allows users to customise the behaviour of the shell by redefining the function. This is similar to how fish_title or fish_greeting behave, where the default implementation can be easily overridden.
The function receives as arguments the job id, command line, signal name and signal description.
Since 4414d5c888 (in fish 3.0.0) we
don't autoload completions if the command doesn't exist.
So there is no need to check inside the scripts anymore.
Whats more, a few (like pip and cabal) checked `command -q` instead of
`type -q`, meaning they'd fail if someone used a function instead of a
command of that name.
If the *command* actually needs to exist, checks like that are still
warranted, like in `npm` where aliasing it to `nvm` is popular.
A teensy additional bit: Make `sysctl -w` the same as `sysctl
--write`. That description was bogus.
At the moment calling __fish_prepend_sudo multiple times does not toggle
sudo, and also unnecessarily uses the `-c` flag to `commandline` to see if
the first token on the commandline is "sudo".
This change removes the `-c` switch and also toggles "sudo" on multiple
calls to __fish_prepend_sudo, while maintaining the cursor position and
while maintaining any spaces between "sudo" and the next token on the
commandline.
The local-exported variable will have disappeared by the time the
function is called.
"-V"/"--inherit-variable" is meant for something like this.
Fixes#7011
The completions for help know many more help topics, it makes no sense
to whitelist them here.
Fix anchor links for tutorial sections.
Remove some dead code: the "man" branch was unreachable because of the
earlier (__fish_print_commands) case.
Add missing options:
--path causes the specified variable to be treated as a path variable, meaning it will automatically be split on colons, and joined using colons when quoted (echo "$PATH") or exported.
--unpath causes the specified variable to not be treated as a path variable. Variables with a name ending in "PATH" are automatically path variables, so this can be used to treat such a variable normally.
[ci skip]
* Fix issue if md5sum is used instead of md5
Both have a different output which results in different array sized
Signed-off-by: Ron Gebauer <ron.gebauer@raytion.com>
* Add feedback
Signed-off-by: Ron Gebauer <ron.gebauer@raytion.com>
* Fix manpath handling in create_manpage_completions.py
...as well as do some (very!) light cleanup.
Currently, `create_manpage_completions.py` does not properly
understand/respect the `$MANPATH` variable. One important feature of
`$MANPATH` is that an empty component (i.e. the trailing : in
`foo:bar:`) expands to the 'default' or 'system' path -- that is to say,
the path that would be used if `$MANPATH` was unset. This allows the
user to extend the manpath without clobbering it, and has been a feature
many Unices have included for years.
The current implementation blindly uses the `$MANPATH` variable if it
exists, which does not allow for this behaviour -- to expand the
variable correctly, an external program must be invoked. Therefore, we
first shell out to the 'proper' (read: best guess) external program. If
that fails, we can then try to use `$MANPATH` directly/literally.
Finally, if both of those are impossible, we can fall back to some
common paths from widely used operating systems.
Note that the `man.conf` parsing has been removed: this is because while
many 'traditional' Unices (BSDs, Solaris, macOS) support this file, only
macOS actually ships a file -- most other Unices use a `conf.d`-style
layout and supporting that from our Python is impractical and silly at
best. On GNU (read: Linux) systems, `mandb` uses `/etc/man_db.conf` with
slightly different syntax and sematics. As this code-path has bitrotted
(and likely never worked, anyway), just remove it.
`create_manpage_completions.py` looks like it has suffered a lot of
confusion and bitrot in general over the last few years -- and is
overdue for a major refactoring. I am quite interested in tackling this,
but I plan to wait until the go-ahead to drop support for Python 2 is
given, as a major refactor/rewrite that still supports Python 2 (and
thus ignores the ergonomic/API/syntax improvements of Python 3) does not
make sense to me.
Related: #5657
It would probably be good to revisit `man.fish` once again when a
comprehensive refactor happens: hopefully every permutation of
`man`/`$MANPATH` could be documented as part of that effort.
* Restore /etc/man.conf parsing
I was not aware that this codepath was used -- since it appeared that it
would throw an error when it was reached. Redo it, using regex, and
support parsing NetBSD man.conf as well (untested).
* Fix create_manpage_completions.py under Python 2
It removed $KONSOLE_PROFILE_NAME and added $KONSOLE_VERSION.
Let's assume if $KONSOLE_PROFILE_NAME is set we use the old sequences,
if not we use the new ones.
