At the moment the "prepend sudo" functionality always sets the cursor to
the end of the line. This changes it to restore the relative position of
the cursor.
OpenBSD uses [unveil(2)](https://man.openbsd.org/unveil) in chromium and
firefox. This means that things outside of directories like ~/Downloads or /tmp are not visible to the
browsers.
Change webconfig so it uses tempfile.NamedTemporaryFile to create our temp file.
We'd use $__fish_data_dir, but that already had the "/fish" component,
and then we'd add it again later, so we would try to find vendor
functions in places like
/usr/share/fish/fish/vendor_functions.d
which obviously don't exist.
Instead let's add the "/fish" component to the xdg dirs early, which
also saves us from having to repeat it later.
Fixes#6428
See #6508
[ci skip]
It's now good enough to do so.
We don't allow grid-alignment:
```fish
complete -c foo -s b -l barnanana -a '(something)'
complete -c foo -s z -a '(something)'
```
becomes
```fish
complete -c foo -s b -l barnanana -a '(something)'
complete -c foo -s z -a '(something)'
```
It's just more trouble than it is worth.
The one part I'd change:
We align and/or'd parts of an if-condition with the in-block code:
```fish
if true
and false
dosomething
end
```
becomes
```fish
if true
and false
dosomething
end
```
but it's not used terribly much and if we ever fix it we can just
reindent.
They need to be escaped twice, for the local and the remote shell.
Also don't suggest local files as rsync remote paths (-a -> -xa) and
fix completion for remote paths containing multiple consecutive spaces.
Fixes#1872
[ci skip]
$XDG_DATA_DIRS/vendor_{completions,conf,functions}.d
Additionally, CMake variables extra_{completions,conf,functions}dir are
appended, if they are not already contained in $XDG_DATA_DIRS.
If XDG_DATA_DIRS is not defined, we fall back to
$__fish_datadir/vendor_completions.d:${extra_completionsdir}
for completions. Same for conf and functions.
This removes a call to `sed` and allows the user to specify shortening
via the variable.
We still default to disabling shortening because this prompt never
did.
[ci skip]
We just do a cheesy version check and hope it works out.
If this is fixed in 10.15.4, we have to reenable it. If it still isn't
fixed in 10.16, we need to adjust it.
Fixes#6270
Use string split instead of cut - which we'd fork for 2*signal
count times in a loop when tab was first pressed. Noticably faster
If giving a signal num, what works everywhere is -NUM, if giving
a signal name, what works everywhere is -s NAME - don't show -sNUM
or -NAME completions; that only works on GNU and it's redundant
anyhow as we show the signal number in the description field for -s
or the signal name for the -NUM case in the pager.
Sort -sNAME completions by the signal number not alphabetical
Shorten descriptions
This is part of our (well, my) quest to spice up the default prompt.
In this case we color the host if $SSH_TTY is set, which is easy to
detect and helps draw attention to the host.
See #6398.
See #6375.
This variable holds an integer that resembles the fish version up to
that initializations were performed. It should be incremented whenever
some new initialization is required after upgrading fish. This should
not change the behavior for existing fish installations, except for a
minor message on installations that upgrade from fish<2.3.0.
[ci skip]
This use of eval is unsafe, not really all that useful and can spew
errors that can't be suppressed. So let's remove it, and in future add
a thing that can do expansions in a safe manner
Fixes#6456.
__fish_complete_suffix accepts a first argument containing a
brace-expansion, like
__fish_complete_suffix '.{c,cpp,py}'
We're gonna be removing the `eval` that does that shortly, so let's
remove all uses in our code.
"To assume" and such.
It doesn't check $SHELL, so it might have some other automagic that
can fail (probably still because of the login shell, but I have no
idea).
Override the special variable that
click-completion (https://github.com/click-contrib/click-completion)
uses to force it instead.
Really fixes#6454.
[ci skip]
This checks $SHELL to determine which completions to print, and $SHELL
is typically set by your login program.
So if the login shell isn't fish, this will print the wrong
completions.
Fixes#6454
[ci skip]
"-C" is short for "--case-sensitive", which is entirely okay with "--delete".
The one that isn't okay is "-X", which is short for "--Clear".
Seen on gitter.im
This prefixes files beginning with `-` with a `./` when generating
completions *in fish code*. Standard completions for directory listings
generated by the C++ directory traversal code are not afected by this
patch.
Most fish completions defer to `__fish_complete_suffix` to generate the
file/directory completions, these *will* be corrected.
From the `git-switch` documentation:
If <branch> is not found but there does exist a tracking branch in
exactly one remote (call it <remote>) with a matching name, treat as
equivalent to
$ git switch -c <branch> --track <remote>/<branch>
* Make `type -p` and `type -P` behave as documented
* Recognize `-` as an additional sign of no path
Functions created via `source` (like by `alias`) cause `functions --details` to return `-`
rather than `stdin` when invoked upon them.
Set variables for available connections and SSIDs only when the completion is loaded.
This is not perfect but faster than scanning for connections everytime.
Don't complete connection UUID, DBUS-PATH, ACTIVE-PATH because they are unintelligible.
Instead only complete the connection name.
See #6379
[ci skip]
* Add the `--succinct` flag to `type`
* Use `echo` rather than `printf`
* Change `succinct` to `short`; print path if known
* Clean up the printing logic ever so slightly
This was mostly dead, since $fish_color_host is set to normal in
__fish_config_interactive. The assignment was only used if the user
explicitly unsets fish_color_host (which they shouldn't, really).
Anyway it's weird to use cyan, use normal instead.
[ci skip]
The colors are set in __fish_config_interactive before the prompt is
painted for the first time.
Also initialize the $fish_color_status for the (pipe) status, bump the
version for that.
[ci skip]
If a command fails, print the pipestatus in red instead of yellow and
don't print the status of the last process again. See #6375.
Also use $fish_color_status for coloring status consistently.
Also use __fish_pipestatus_with_signal to print SIGPIPE instead
of a numeric code on e.g.: yes | less +q
[ci skip]
This purported to need python > 3.4, but used anypython.
Plus it's not super useful anyway since it can easily be told to
use *all* cpus, so there's no need to set it to the precise number.
See #6400.
[ci skip]
If Python 3.4 or later installed on the system, complement to the
number of physical cores. In addition, even if the number of physical
cores cannot be obtained, it was fixed to run properly.
(command pwd) uses the system's implementation of pwd. At least the GNU
coreutils implementation defaults to -P, which resulted in symlinks being
expanded when switching between directories with nextd/prevd.
- Don't use a guard uvar - we're only setting variables now, and
- that's basically free.
- Allow non-universal color variables
- Simplify the root color setting a bit.
- Some comments
[ci skip]
This did some weird unescaping to try to extract the first word.
So we're now more likely to be *correct*, and the alias benchmark is
about 20% *faster*.
Call it a win-win.
Fix 'string length: Unknown option': add `--` before $subcommand
Fix count $subcommand always = 1 with `sudo` and `doas`:
give argv as array to __fish_complete_subcommand
[ci skip]
This mostly fixes some wrong indents or replaces some stray tab indents.
I excluded alignment on purpose, because we have a whole bunch of code
that goes like
```fish
complete -c foo -n 'some-condition' -l someoption
complete -c foo -n 'some-longer-condition' -l someotheroption
```
and changing it seems like a larger thing and would include more
thrashing.
See #3622.
This would have prevented #6323.
While we don't want to pepper `command` everywhere, `psub` is kind of
a core thing, so we should try to proof it against common problems.
This adds string-x.rst for each subcommand x of string. The main page
(string.rst) is not changed, except that examples are shown directly after
each subcommand. The subcommand sections in string.rst are created by
textual inclusion of parts of the string-x.rst files.
Subcommand man pages can be viewed with either of:
```
man string collect
man string-collect
string collect <press F1 or Alt-h>
string collect -h
```
While `string -h ...` still prints the full help.
Closes#5968
Changes identity `is` for equality `==` check. To remove python warnings when updating auto complete
```
/usr/local/Cellar/fish/3.0.2/share/fish/tools/deroff.py:770: SyntaxWarning: "is" with a literal. Did you mean "=="?
if len(comps) is 2:
/usr/local/Cellar/fish/3.0.2/share/fish/tools/deroff.py:954: SyntaxWarning: "is" with a literal. Did you mean "=="?
if len(comps) is 2:
Parsing man pages and writing completions to /Users/james/.local/share/fish/generated_completions/
6155 / 6155 : zic.8
```
This reverts commit f620ddf03b.
Setting the paste handler isn't performance-sensitive.
On the other hand setting it this way makes things less transparent,
less flexible (if e.g. a paste handler is installed while the shell is running),
and causes #6286.
Fixes#6286.
[ci skip]
Presently the completion engine ignores builtins that are part of the
fish syntax. This can be a problem when completing a string that was
based on the output of `commandline -p`. This changes completions to
treat these builtins like any other command.
This also disables generic (filename) completion inside comments and
after strings that do not tokenize.
Additionally, comments are stripped off the output of `commandline -p`.
Fixes#5415Fixes#2705
This just makes more sense, as people don't want to enter exact
matches if they delete interactively.
It also brings it in line with "search".
Fixes#6142
Rejects #6070
MacOS Catalina apparently ships a stripped down svn that doesn't have
`svnversion`, which we use to print the revision.
For now skip the entire step to remove error spam.
Fixes#6267.
[ci skip]
Every builtin or function shipped with fish supports flag -h or --help to
print a slightly condensed version of its manpage.
Some of those help messages are longer than a typical screen;
this commit pipes the help to a pager to make it easier to read.
As in other places in fish we assume that either $PAGER or "less" is a
valid pager and use that.
In three places (error messages for bg, break and continue) the help is
printed to stderr instead of stdout. To make sure the error message is
visible in the pager, we pass it to builtin_print_help, every call of which
needs to be updated.
Fixes#6227
Some distros (Arch) use python command for Python 3, so we need to update the scripts to work with it. We cannot just switch to python3 command because MacOS does not ship it.
* functions/__fish_print_hostnames: Fix ssh_configs no values return
`string replace` not working with mutlilines variable.
So split per line first.
* functions/__fish_print_hostnames: remove quotes at `split '\n'`
"\n with quotes" will cause `string split` weird issues.
* functions/__fish_print_hostnames: using `read -alz -d \n`
Fix `$contents` issues together
Since the url is inside a AngularJS markup {{url}}, it's better to use **ng-href**.
From [AngularJS Documentation](https://docs.angularjs.org/api/ng/directive/ngHref):
<br>
"Using AngularJS markup like {{hash}} in an href attribute will make the link go to the wrong URL if the user clicks it before AngularJS has a chance to replace the {{hash}} markup with its value. Until AngularJS replaces the markup the link will be broken and will most likely return a 404 error. The ngHref directive solves this problem."
We used to just check for the presence of "--" on the command line to
make judgements about which completions to suggest. Now, even if "--" is
present, we can still make different suggestions by taking the cursor's
position into account.
If "--" is present in the command line, it's usually safe to assume that
the user is going to want to complete a file tracked by git so let's
only suggest branches if "--" isn't present.
When there is already a "src:", we assume that it is a valid ref and
just complete "dst". This allows completion of dest if src is e.g. a
commit SHA (completing all possible refs would probably impact
performance).
See issue #3035.
Corrects #6110
BSD `seq` produces a down-counting sequence when the second argument is
smaller than the first, e.g.:
$ seq 2 1
2
1
$
While GNU `seq` produces no output at all:
$ seq 2 1
$
To accommodate for this behavior, only run `seq` when we are sure that
the second argument is greater than or equal to the first (in this case,
the second argument `line_count` should be greater than 1).
* Add completions/sfdx.fish
* completions/sfdx.fish: add completion for options
* completions/sfdx.fish: add a completion for --manifest(-x) option which need package.json
* completions/sfdx.fish: replace redundant function with already existing one
Revert "gut gpg.fish/gpg1.fish/gpg2.fish; migrate functionality to __fish_complete_gpg.fish"
This reverts commit d558218d03.
Revert "break version-specific completions out into independent function;"
This reverts commit 9160e77b01.
Revert "split gpg2- and gpg1-specific completions to conditional block"
This reverts commit a069b95f63.
* Fix default Alt+W keybinding
The old keybinding would chop off the last line of the `whatis` output
when using a multi-line prompt. This fix corrects that.
* Make variable local and remove unneeded if statement
* Test that token is non-empty
1. Added missing commands and arguments.
2. Removed alternative spelling of some commands (e.g. clear-cache|clearcache) since a choice of spelling is not really useful for completion.
3. Fixed a typo: np-ansi → no-ansi.
4. Removed redundant backslash in front of $COMPOSER_HOME.
The updated completion was initially generated using the bamarni/symfony-console-autocomplete package and then incorporated into the existing code.
Reproducer: type `: \<RET><M-p>`. This used to print an error due to builtin test receiving
too many arguments.
It looks like (commandline -j) can return multiple items, because a job can be broken up in multiple
lines terminated by backslashes.
With the new support for self-insert inserting a bound sequence,
the default binding for space as expanding abbreviations can be simplified
to just `self-insert expand-abbr`. This also fixes the bug where space
would cancel pager search.
This commit makes git completions aware of files that are both staged as renamed, and have unstaged
modifications/are deleted.
__fish_git_files now potentially prints these files twice:
$ __fish_git_files renamed modified
foo Renamed file
foo Modified file
Fixes#6031
By not manipulating each line or even each file at a time, we can go
back to `string` and piece together a pipeline that will execute
significantly faster than shelling out to `awk` will. This also removes
one of the few dependencies on `awk` in the codebase.
With this change, `__fish_print_hostnames` now finishes ~80% faster than
it used to a few commits back.
Reordering the `getent hosts` and read from `/etc/hosts` combined with
minimizing shelling and job invocations for parsing the output results
in a profiled and benchmarked ~42% decrease in the time it takes to run,
and that's on a machine with a very small hosts list in the first place.
This update also fixes the hadling of IPv6 addresses in the hosts
output, which were previously ignored, and ignores 127.* loopback
addresses in addition to the 0.0.0.0 address (plus adds support for
shorter IPv4 notations).
See for example: https://git-scm.com/docs/git-cherry
git cherry is quite helpful when trying to findout if merges between
branches are complete, when there were cherry-picks in addition to
merges.
Previously, elements already existing in the path variable would keep their position when the path was being constructed from the config files. This caused issues given that $PATH typically already contains "/usr/bin:/bin" when fish initializes within a macOS terminal app. In this case, these would keep their position at the front of the $PATH, even though the system path_helper configs explicitly place them _after_ other paths, like "/usr/local/bin". This would render binaries in "/usr/local/bin" as effectively "invisible" if they also happen to live in "/usr/bin" as well. This is not the intended
This change makes the __fish_macos_set_env config function emulate the macOS standard path_helper behavior more faithfully, with:
1. The path list being constructed *from scratch* based on the paths specified in the config files
2. Any distinct entries in the exist path environment variable being appended to this list
3. And then this list being used to *replace* the existing path environment variable
The result, for a vanilla fish shell on macOS, is that the $PATH is now set to:
/usr/local/bin /usr/local/sbin /usr/bin /bin /usr/sbin /sbin
Where previously it was set to:
/usr/bin /bin /usr/local/bin /usr/sbin /sbin
This new $PATH exactly matches the order of paths specified in `/etc/paths`.
$__fish_git_prompt_use_informative_chars will use the informative
chars without requiring informative mode (which is really frickin'
slow!).
See #5726.
[ci skip]
This previously effectively checked `string split ' '`s return status,
which was false if it didn't split anything. And while that should be
true if getent fails (because it should produce no output), it's also
true if it doesn't print a line with multiple aliases. Which should be
fairly typical.
Instead we use our new-found $pipestatus to check what getent returns,
in the assumption that it'll fail if it doesn't support hosts.
Follow up to 8f7a47547e.
[ci skip]
`getent hosts` is expensive-ish - ~50ms, so we don't want to run it
twice just to figure out it works.
Apparently this works everywhere but CYGWIN and possibly older
OpenBSD, but we don't want to explicitly blacklist those.
[ci skip]
Instead of requiring a flag to enable newline trimming, invert it so the
flag (now `--no-trim-newlines`) disables newline trimming. This way our
default behavior matches that of sh's `"$(cmd)"`.
Also change newline trimming to trim all newlines instead of just one,
again to match sh's behavior.
The `string collect` subcommand behaves quite similarly in practice to
`string split0 -m 0` in that it doesn't split its output, but it also
takes an optional `--trim-newline` flag to trim a single trailing
newline off of the output.
See issue #159.
If you changed $__fish_git_prompt_show_informative_status, it
triggered a variable handler, which erased the chars, but neglected to
unset $___fish_git_prompt_init, so we just kept chugging along with
empty characters.
What's the hardest thing in CS again? Cache something something?
[ci skip]
This way we use our core file completion code, which is much more
flexible than we can easily achieve directly in script (which would
require e.g. an `expand` builtin, and case-insensitive globs).
Fixes#5896.
This was quite famously rather complicated.
We drop a bunch of cases - we can't handle tmux-starting-terminals
100% accurately, so we just don't try. It should be quite rare that
somebody starts a different terminal from tmux.
We drop the `tput` since it is useless (like terminfo in general for
feature-detection, because everyone claims to be xterm).
So we just check if we are in konsole, iTerm, vte or genuine-xterm.
Fixes#3696.
See #3481.
This runs build_tools/style.fish, which runs clang-format on C++, fish_indent on fish and (new) black on python.
If anything is wrong with the formatting, we should fix the tools, but automated formatting is worth it.
This completed the commandline with options removed, which looked like
env VAR=VAL command option
Which didn't really actually work.
Fixes#5856.
[ci skip]
* Add speedtest-cli/speedtest completion
Added a completion file for speedtest-cli utility (https://github.com/sivel/speedtest-cli) as shipped from various package repositories.
* added no-files parameter
* Remove inheritance to speedtest
* Create speedtest.fish
This command can be used to "`cat`" the contents of `$path` as of `$rev`.
These are "silent" completions, e.g. while this adds a completion for
`git show master:foo`, the completions for `git show <TAB>` are not
affected; these "advanced" completions kick in only after at least
`git show master:<TAB>` to prevent completion pollution or slowing down
tab completions in the typical case (as this would cause each valid and
possibly unique $rev completion result to complete to `n*$rev`
completions for *n* files.
[ci skip]
Dealing with macOS output in a fast manner using `string` is surprisingly hard, given that it features lines like
gls(1), ls(1) - list directory contents
Printing the "gls" with the description and the "ls" with the description requires a `while read` loop, and that's too slow.
This reverts commit 7784a5f23c.
[ci skip]
I did not realize builtins could safely call into the parser and inject
jobs during execution. This is much cleaner than hacking around the
required shape of a plain_statement.
* Honour `dirprev` scope
Honour the scope of the `dirprev` variable if it is universal
and avoid to shadow it with a global. This enables to share
the `cd` history between sessions.
* Honor dirnext and __fish_cd_direction scope
If these variables exist in the universal scope, do not shadow them
`eval` has always been implemented as a function, which was always a bit
of a hack that caused some issues such as triggering the creation of a
new scope. This turns `eval` into a decorator.
The scoping issues with eval prevented it from being usable to actually
implement other shell components in fish script, such as the problems
described in #4442, which should now no longer be the case.
Closes#4443.
No longer uses global vars to cache set_color output, this was
from before set_color was a builtin, it is pointless now.
This is also a prompt from before we had bright named colors,
and it appears it was relying on -o red to get bright red.
so use brred, etc.
If we switch the bind mode, we add a "force-repaint" there just to
redraw the mode indicator.
That's quite wasteful and annoying, considering that sometimes the prompt can take
half a second.
So we add a "repaint-mode" function that just reexecutes the
mode-prompt and uses the cached values for the others.
Fixes#5783.
* Add "expand-abbr" bind function
This can be used to explictly allow expanding abbreviations.
* Make expanding abbr explicit
NOTE: This accepts them for space only, we currently also do it for \n
and \r.
* Remove now dead code
We no longer trigger an abbr implicitly, so we can remove the code
that does it.
* Fix comment
[ci skip]
This searched for package.json in any parent, so just like finding
.git and .hg directories it _needs_ to use the physical pwd because
that's what git/hg/yarn use.
In general, if you do _any_ logic on $PWD, it should be the physical
path. Logical $PWD is basically only good for display and cd-ing
around with symlinks.
[ci skip]
This called `eval $fish_browser --version` to figure out if it is
lynx.
That's really not worth it just to support edge-cases using a rather
unusual browser, to work around a bug in it.
Instead we just see if the browser name starts with "lynx", which
should work in 99.9% of cases.
This created another local version of the variable just for the if-block.
Can't say I love the space prefix, but then I think we have too many
of these modes anyway.
If you use these to figure out if there _are_ staged files, or dirty
or whatever, you currently need to check the output, which relies on
the configured character.
Instead, we let them also return a useful status.
Notably, this is *not* simply the status of the git call.
__fish_git_prompt_X returns 0 if the repo is X.
This works for untracked, but the "diff" things return 1 if there is a
diff, so we invert the status for them.
See #5748.
[ci skip]
