This goes to a separate file because that makes option parsing easier
and allows profiling both at the same time.
The "normal" profile now contains only the profile data of the actual
run, which is much more useful - you can now profile a function by
running
fish -C 'source /path/to/thing' --profile /tmp/thefunction.prof -c 'thefunction'
and won't need to filter out extraneous information.
Currently binding `exit` to a key checks too late that it's exitted,
so it leaves the shell hanging around until the user does an execute
or similar.
As I understand it, the `exit` builtin is supposed to only exit the
current "thread" (once that actually becomes a thing), and the
bindings would probably run in a dedicated one, so the simplest
solution here is to just add an `exit` bind function.
Fixes#7604.
It was always a bit ridiculous that argparse required `X-longflag` if
that "X" short flag was never actually used anywhere.
Since the short letter is for getopt's benefit, we can hack around
this with our old friend: Unicode Private Use Areas.
We have a counter, starting at 0xE000 and going to 0xF8FF, that counts
up for all options that don't have a short flag and provides one. This
gives us up to 6400 long-only options.
6.4K should be enough for everybody.
When building from source, there is a warning:
../doc_src/cmds/string-match.rst:13: WARNING: Inline emphasis
start-string without end-string.
One fix appears to be putting a space after the epmhasized 'n' character,
e.g., `*n* th` instead of `*n*th`.
E.g. if we do `string match -q`, and we find a match, nothing about
the input can change anything, so we quit early.
This is mainly useful for performance, but it also allows `string`
with `-q` to be used with infinite input (e.g. `yes`).
Alternative to #7495.
Currently a bit limited, unfortunately printf's `%a` specifier is
absolutely unreadable.
So we add `hex` and `octal` with `0x` and `0` prefixes respectively,
and also take a number but currently only allow 16 and 8.
The output is truncated to integer, so scale values other than 0 are
invalid and 0 is implied.
The docs mention this may change.
This switch is no longer necessary when only one command is given.
Internally completions are stored separately for each command,
so we only every print one command name per "complete" line anyway.
If the padding is not divisible by the char's width without remainder,
we pad the remainder with spaces, so the total width of the output is correct.
Also add completions, changelog entry, adjust documentation, add examples
with emoji and some tests. Apply some minor style nitpicks and avoid extra
allocations of the input strings.
Technically the equivalence would be something like
string length -q $str
test -n (string join \n -- $str | string collect)
To handle when str has multiple empty strings;
but quoting is easier to remember and enough for most practical purposes.
This reads any additional positional arguments given to `fish -c` into
$argv.
We don't handle the first argument specially (as `$0`) as that's confusing and
doesn't seem very useful.
Fixes#2314.
This allows
bind -k backspace suppress-autosuggestion or backward-delete-char
To remove the suggestion on the first press and then delete
chars.
Note: This requires that we then don't reenable suggestions
immediately afterwards. Currently we don't after deletion.
Fixes#1419.
The person reading this is "you". It's completely okay and sounds
better to address them directly.
When we're talking about OS users or users of fish script the reader
writes, "the user" is still okay.
[ci skip]
The case for symlinked directories being duplicated a lot isn't there,
but there *is* a usecase for adding the symlink rather than the
target, and that's homebrew.
E.g. homebrew installs ruby into /usr/local/Cellar/ruby/2.7.1_2/bin,
and links to it from /usr/local/opt/ruby/bin. If we add the target, we
would miss updates.
Having path entries that point to the same location isn't a big
problem - it's a path lookup, so it takes a teensy bit longer. The
canonicalization is mainly so paths don't end up duplicated via weird
spelling and so relative paths can be used.
Taken from GNU realpath, this one makes realpath not resolve symlinks.
It still makes paths absolute and handles duplicate and trailing
slashes.
(useful in fish_add_path)
Currently, completions have to be specified like
```fish
complete -c foo -l opt
```
while
```fish
complete foo -l opt
```
just complains about there being too many arguments.
That's kinda useless, so we just assume if there is one left-over
argument that it's meant to be the command.
Theoretically we could also use *all* the arguments as commands to
complete, but that seems unlikely to be what the user wants.
(I don't think multi-command completions really happen)
Currently only `complete` will list completions, and it will list all
of them.
That's a bit ridiculous, especially since `complete -c foo` just does nothing.
So just make `complete -c foo` list all the completions for `foo`.
Previously, when a command wasn't found, fish would emit the
"fish_command_not_found" *event*.
This was annoying as it was hard to override (the code ended up
checking for a function called `__fish_command_not_found_handler`
anyway!), the setup was ugly,
and it's useless - there is no use case for multiple command-not-found handlers.
Instead, let's just call a function `fish_command_not_found` if it
exists, or print the default message otherwise.
The event is completely removed, but because a missing event is not an error
(MEISNAE in C++-speak) this isn't an issue.
Note that, for backwards-compatibility, we still keep the default
handler function around even tho the new one is hard-coded in C++.
Also, if we detect a previous handler, the new handler just calls it.
This way, the backwards-compatible way to install a custom handler is:
```fish
function __fish_command_not_found_handler --on-event fish_command_not_found
# do a little dance, make a little love, get down tonight
end
```
and the new hotness is
```fish
function fish_command_not_found
# do the thing
end
```
Fixes#7293.
Now command, jobs, type, abbr, builtin, functions and set take `-q` to
query for existence, but the long option is inconsistent.
The first three use `--quiet`, the latter use `--query`. Add `--query`
to the first three, but keep `--quiet` around.
Fixes#7276.
Instead of informing the bell character (hex 07), the example was using
an escaped \ followed by x07.
$ echo \\x07
\x07
$ echo \x07
$ echo \x07 | od -a
0000000 bel nl
0000002
$
* docs: Use \u instead of \\u
Instead of informing the Unicode character 慡, this example was using an
escaped \ followed by u6161.
$ echo \\u6161
\u6161
$ echo \u6161
慡
Before:
$ string escape --style=var 'a1 b2'\\u6161 | string unescape --style=var
a1 b2\u6161
Now:
$ string escape --style=var 'a1 b2'\u6161 | string unescape --style=var
a1 b2慡
Just as `math "bitand(5,3)"` and `math "bitor(6,2)"`.
These cast to long long before doing their thing,
so they truncate to an integer, producing weird results with floats.
That's to be expected because float representation is *very*
different, and performing bitwise operations on floats feels quite useless.
Fixes#7281.
Was: "parameter expansion takes before expressions are evaluated."
Now: "parameter expansion happens before expressions are evaluated."
I suspect the original intent was to use "takes place," but I see "happens" as less idiomatic and therefore may benefit non-English-native users.
Also return the number of failed files.
I decided to *just* print the filenames (newline-separated because
NULLs are annoying here) to make it easier to deal with.
See #7251.
This was always awkward as fish script, and had problems with
interrupting the autoloading.
Note that we still leave the old function intact to facilitate easier
upgrading for now.
Fixes#7145.
Add a helper function to check if the user is root. This function can be
useful for the prompts for example. Modify the prompts made root checked
to use the function instead. Add also the support of Administrator like
a root user.
Fixes: #7031
There's a terrible number of fishscripts that start with
set path (dirname (status filename))
And that's really just a bit boring.
So let's let it be
set path (status dirname)
* Add an "_" builtin to call into gettext
We already have gettext in C++ (if available), so it seems weird to
fork off a command to start it from script.
This is only for fish's own translations. There's no way to call into
other catalogs, it just translates all arguments separately.
This is faster by a factor of ~1000, which allows us to call
translations much more, especially from scripts.
E.g. making fish_greeting global by default would hurt cost-wise,
given that my fish starts up in 8ms and just calling the current `_`
function takes 2ms, and that would have two calls.
Incidentally, this also makes us rely on a weirdly defined function
less, so it:
Fixes#6804.
* docs: Add `_` docs
Let's see if that filename works out.
* Reword _ docs
This is a function you can either execute once, interactively, or
stick in config.fish, and it will do the right thing.
Some options are included to choose some slightly different behavior,
like setting $PATH directly instead of $fish_user_paths, or moving
already existing components to the front/back instead of ignoring
them, or appending new components instead of prepending them.
The defaults were chosen because they are the most safe, and
especially because they allow it to be idempotent - running it again
and again and again won't change anything, it won't even run the
actual `set` because it skips that if all components are already in.
Fixes#6960.
When we say "the XYZ command/builtin", we should typically include a
link. The exceptions are
- In the documentation for that command - no need to link to ulimit in
the ulimit page
- When we've already linked before - not every thing needs to be
clickable, or clicking it will cause the browser to mark fifty words
as visited. This is roughly what wikipedia does for crosslinks.
[ci skip]
This adds a new readline command self-insert-notfirst, which is
analogous to self-insert, except that it does nothing if the cursor
is at the beginning. This will serve as a higher-performance implementation
for stripping leading spaces on paste.
The default hg prompt is slow on large repositories (hg status takes
2-3 seconds on mozilla-central) which is unacceptable as a default.
Mimick our git prompt: by default, only show the current branch.
If the new variable $fish_prompt_hg_show_informative_status is set,
then use the old behavior.
[ci skip]
This was written before local-exported variables did anything useful.
Passing these vars as local-exports removes the need to define the
validation function with `--no-scope-shadowing` which is quite the
hack.
This is apparently quite slow on large svn repos (like 40 seconds
slow), and we don't have a good thing to display other than the full
file information.
So we'll have to disable it for now.
Fixes#6681.
[ci skip]
