Render the command line buffer only until the last line we can fit
on the screen.
If the cursor pushes the viewport such that neither the prompt nor
the first line of the command line buffer are visible, then we are
"scrolled". In this case we need to make sure to erase any leftover
prompt, so add a hack to disable the "shared_prefix" optimization
that tries to minimize redraws.
Down-arrow scrolls down only when on the last line, and up-arrow always
scrolls up as much as possible. This is somewhat unconventional;
probably we should change the up-arrow behavior but I guess it's a
good idea to show the prompt whenever possible. In future we could
solve that in a different way: we could keep the prompt visible even
if we're scrolled. This would work well because at least the left
prompt lives in a different column from the command line buffer.
However this assumption breaks when the first line in the command
line buffer is soft-wrapped, so keep this approach for now.
Note that we're still broken when complete-and-search or history-pager
try to draw a pager on top of an overfull screen. Will try to fix
this later.
Closes#7296
Commit ba67d20b7 (Refresh TTY timestamps after nextd/prevd, 2024-10-13)
wasn't quite right because it also needs to fix it for arbitrary commands.
While at it, do this only when needed:
1. It seems to be only relevant for multiline prompts.
Note that we can wait until after evaluation to check if the prompt is
multiline, because repaint events go through the queue, see 5ba21cd29
(Send repaint requests through the input queue again, 2024-04-19).
2. When the binding doesn't execute any external command, we probably don't
need to fix up whatever the user printed. If they actually wanted to show
output and print another prompt, they should currently use "__fish_echo",
to properly support multiline prompts. Bindings should produce no other
output. What distinguishes external programs is that they can trigger this
issue even if they don't produce any output that remains visible in fish,
namely by using the terminal's alternate screen.
Would be nice if we could get rid of __fish_echo; I'm not yet sure how.
Fixes#10800
Completion on ": {*," used to work but nowadays our attempt to wildcard-expand
it fails with a syntax error and we do nothing. This behavior probably only
makes sense for the overflow case, so do that.
Commit a91bf6d88 (builtin.c: builtin_source now checks that its argument is
a file., 2005-12-16) fixed an infinite loop for commands like "source /"
where the argument is a directory.
It did so by erroring out early unless the filename argument is a regular file.
This is too restrictive; it disallows reading from special files like /dev/null
and fifos.
Today we get a sensible error without this check, so remove it.
This fixes a macOS-specific bug. See 390b40e02 (Fix regression not refreshing
TTY timestamps after external command from binding, 2024-05-29) and 8a7c3ceec
(Don't abandon line after writing control sequences, 2024-04-06).
Fixes#10779
OSC 133 was added to tmux 3.4.
Also fix the test on macOS where we do have 3.5a in CI; for some reason we
get copy_cursor_y=6 there. I didn't investigate yet but at least that's
not the same bug this test was made to fix.
For multi-line prompts, we start each leading line with a clr_eol. Immediately
before printing these prompt lines we emit the OSC 133 prompt start marker.
Some terminals such as tmux interpret make clr_eol delete such markers,
hence prompt navigation is broken.
Fix this by printing the marker only after clr_eol.
The scenario where this triggers is quite odd. I haven't looked into why
the problem doesn't exist if I remove the recursive repaint request.
See https://github.com/tmux/tmux/issues/4183Closes#10776
This should make the sort have a strict weak ordering, which rust
requires since 1.81 (or it will panic).
Note: This changes the order, but that's *fine* since the current
order is random weirdness anyway.
Fixes#10763
This gave a weird error when you did e.g. `math Foo / 6`:
"Missing Operator" and only the "F" marked.
Adding an operator here anywhere won't help, so calling this an
"Unknown function" is closer to the truth. We also get nicer markings
because we know the extent of the identifier.
byte_to_symbol was broken because it didn't iterate by byte, it
iterated by rust-char, which is a codepoint.
So it failed for everything outside of ascii and, because of a
mistaken bound, ascii chars from 0x21 to 0x2F ("!" to "/" - all the punctuation).
char_to_symbol will print printable codepoints as-is and
others escaped. This is okay - something like `decoded from: +` or
`decoded from: ö` is entirely understandable, there is no need to tell
you that "ö" is \xc3\xb6.
This reverts commit 423e5f6c03.
__fish_apropos is a huge hack under macOS and it seems that it's either broken
or man pages are missing/not indexed under CI. In all cases, hard-code the
results of __fish_describe_command to test the integration machinery
specifically and get the test to pass under macOS CI.
Add round options, but I think can also add floor, ceiling, etc. And
the default mode is trunc.
Closes#9117
Co-authored-by: Mahmoud Al-Qudsi <mqudsi@neosmart.net>
Due to the inherent floating point accuracy issues under i586 described
in #10474 and at https://github.com/rust-lang/rust/issues/114479, we need to add
a workaround to our littlecheck math tests to perform less stringent comparisons
when fish was built for x86 without SSE2 support.
This commit addresses the littlecheck issues that caused #10474 to be re-opened,
but I still have to reproduce the cargo test failures for
`negative_precision_width`, `test_float`, `test_float_g`, and `test_locale`.
We require 3.19
This also makes skipped tests visible, which showed that the
print-help test was never run because the REQUIRES line was off.
In sh-mode, bash's `command -v` returns true if *all* commands exist.
The special input functions self-insert, self-insert-not-first, and
and or used to be handled by inputter_t::readch, but they aren't
anymore with `commandline -f`.
I am unsure if these *would* have worked, I can't come up with a use.
So, for now, do nothing instead of panicking.
This would crash if you ran `commandline -f backward-jump`.
The C++ version would read a char (but badly), this doesn't anymore.
So, at least instead of crashing, just do nothing.
One issue with fish_add_path at the moment is that it is sometimes a bit too intransparent.
You'll try to add a path, but it won't appear - was that because it wasn't a directory,
or because it doesn't exist, or because it was already included?
If it isn't usable after, did fish_add_path not add it because of something or did something *else* remove it?
So we give more explanations - "skipping this because it's a file", "not setting anything because no paths are left to add", ...
This enabled the profile in fish_setlocale, which caused startup
profile to always be on, so
```fish
fish --profile file -c 'foo'
```
would show the entire startup as well
The C++ version of this code simply copied the entire uvar table.
Today we take a reference. It's not clear which one is better.
Removal of locale variables like LC_ALL triggers variable change handlers
which call EnvStackImpl::get. This deadlocks because we still hold the lock
to protect the reference to all uvars. Work around this.
Closes#10513
On this binding we fail to disable CSI u
bind c-t '
begin
set -lx FZF_DEFAULT_OPTS --height 40% --bind=ctrl-z:ignore
eval fzf | while read -l r; echo read $r; end
end
'
because for "fzf", ParseExecutionContext::setup_group() returns early with the
parent process group (which should be fish's own) , hence "wants_terminal"
is false. This seems questionable, I don't think the eval should make a
difference here.
For now, don't touch it; use the more accurate way of detecting whether
a process may read keyboard input. In many of such cases "wants_terminal"
is false, like
echo (echo 1\n2\n3 | fzf)
Fixes#10504
This allows running `set` without triggering any event handlers.
That is useful, for example, if you want to set a variable in an event
handler for that variable - we could do it, for example, in the
fish_user_path or fish_key_bindings handlers.
This is something the `block` builtin was supposed to be for, but it
never really worked because it only allows suppressing the event for
the duration, they would fire later. See #9030.
Because it is possible to abuse this, we only have a long-option so
that people see what is up.
Commit a583fe723 ("commandline -f foo" to skip queue and execute immediately,
2024-04-08) fixed the execution order of some bindings but was partially
backed out in 5ba21cd29 (Send repaint requests through the input queue again,
2024-04-19) because repainting outside toplevel yields surprising results
(wrong $status etc).
Transient prompts wants to first repaint and then execute some more readline
commands, all within a single binding. This was broken by the second commit
because that one defers the repaint until after the binding has finished.
Work around this problem by deferring input events again while a readline
event was queued. This is closest to the historical behavior.
The implementation feels hacky; we might find odd situations.
For example,
commandline -f repaint end-of-line
set token (commandline -t)
sets the wrong token.
Probably not a very important case. We could throw an error or make it work
by letting "commandline -t" drain the input queue.
That seems too complicated, better change repaints to not use the input queue
(and fake $status etc). Let's try to do that in future.
Closes#10492
