Cancellation groups were meant to reflect the following idea: if you ran a
simple block:
begin
cmd1
cmd2
end
then under job control, cmd1 and cmd2 would get separate groups; however if
either exits due to SIGINT or SIGQUIT we also want to propagate that to the
outer block. So the outermost block and its interior jobs would share a
cancellation group. However this is more complex than necessary; it's
sufficient for the execution context to just store an int internally.
This ought not to affect anything user-visible.
Currently, when a variable like $fish_color_command is set but empty:
set -g fish_color_command
what happens is that highlight parses it and ends up with a "normal"
color.
Change it so instead it sees that the variable is empty and goes
on to check the fallback variable, e.g. fish_color_normal.
That makes it easier to make themes that override variables.
This means that older themes that expect an empty variable to be
"normal" need to be updated to set it to "normal".
Following from this, we could make writing .theme files easier by no
longer requiring them to list all variables with specific values.
Either the theme reader could be updated to implicitly set known color
variables to empty, or the themes could feature empty values.
See #8787.
fish reads the tty modes at startup, and tries to restore them to the
original values on exit, to be polite. However this causes problems when
fish is run in a pipeline with another process which also messes with the
tty modes. Example:
fish -c 'echo foo' | vim -
Here vim's manipulation of the tty would race with fish, and often vim
would end up with broken modes.
Only restore the tty if we are interactive. Fixes#8705.
This is a big cleanup to how tty transfer works. Recall that when job
control is active, we transfer the tty to jobs via tcsetpgrp().
Previously, transferring was done "as needed" in continue_job. That is, if
we are running a job, and the job wants the terminal and does not have it,
we will transfer the tty at that point.
This got pretty weird when running mixed pipelines. For example:
cmd1 | func1 | cmd2
Here we would run `func1` before calling continue_job. Thus the tty
would be transferred by the nested function invocation, and also restored
by that invocation, potentially racing with tty manipulation from cmd1 or
cmd2.
In the new model, migrate the tty transfer responsibility outside of
continue_job. The caller of continue_job is then responsible for setting up
the tty. There's two places where this gets done:
1. In `exec_job`, where we run a job for the first time.
2. In `builtin_fg` where we continue a stopped job in the foreground.
Fixes#8699
This is a cleanup of job groups, rationalizing a bunch of stuff. Some
notable changes (none user-visible hopefully):
1. Previously, if a job group wanted a pgid, then we would assign it to the
first process to run in the job group. Now we deliberately mark which
process will own the pgroup, via a new `leads_pgrp` flag in process_t. This
eliminates a source of ambiguity.
2. Previously, if a job were run inside fish's pgroup, we would set fish's
pgroup as the group of the job. But this meant we had to check if the job
had fish's pgroup in lots of places, for example when calling tcsetpgrp.
Now a job group only has a pgrp if that pgrp is external (i.e. the job is
under job control).
* Turn on default bindings for --no-config mode
The fallback bindings are super awkward to use.
This was called out specifically in #7921, I'm going for the targeted
fix for now.
* Only change keybindings when interactive
That's also when we'd source them normally.
These were changed in fish 3.0 in December 2018.
This means upgrading from fish 2.7.1 or earlier to the next fish
version will require users to set their universal variable again.
This just defines a constant to whichever tparm implementation we're
using (either the actual, working one the system provides, or our
kludge to paper over Solaris' inadequacies).
This means that there won't be so much ping-ponging of what "tparm"
stands for. "tparm" is the system's function. Only we don't use it,
just like we don't use wcstod directly.
Fixes#8780
* New -n flag for string join command.
This is an argument that excludes empty result items. Fixes#8351
* New documentation for string-join.
The new argument --no-empty was added at string-join manpage.
* New completions for the new -n flag for string join.
* Remove the documentation of the new -n flag of string join0
The reason to remove this new argument in the join0 is that this flag basically doesn't make any difference in the join0.
* Refactor the validation for the string join.
The string join command was using the length of the argument, this commit changes the validation to use the empty function.
* Revert #4b56ab452
The reason for the revert is thath the build broke on the ubuntu in the Github actions.
* Revert #e72e239a1
The reason the compilation on GitHub broke is that the test was weird, it didn't even run it, Common CI systems are typically very very resource-constrained.
* Resolve conflicts in the string-join.rst.
* Resolve conflicts in the "string-join.rst".
commit #1242d0fd7 not fixed all conflicts.
This is supposed to detect color escape sequences, to figure out how
long an escape sequence is, for use in width calculations.
However, the typical color sequences are already taken care of by
is_csi_style_escape_seq because they look like a csi sequence starting
with `\e[` and ending in `m`.
In the entire terminfo database shipped with ncurses 6.3, these are
the terminals that have non-csi color sequences:
at-color
atari-color
atari_st-color
d220-dg
d230-dg
d230c-dg
d430-dg
d430-unix
d430-unix-25
d430-unix-s
d430-unix-sr
d430-unix-w
d430c-dg
d430c-unix
d430c-unix-25
d430c-unix-s
d430c-unix-sr
d430c-unix-w
d470-dg
d470c-dg
dg+fixed
dgmode+color
dgmode+color8
dgunix+fixed
emu
fbterm
i3164
ibm3164
linux-m1b
linux-m2
minitel1
minitel1b
putty-m1b
putty-m2
st52-color
tt52
tw52
tw52-color
xterm-8bit
Most of these were discontinued in the 90s and their manufacturers no
longer exist (like Data General, which went defunct in 1999). The last one is a special mode for xterm that is
fundamentally UTF-8 incompatible because it encodes a CSI as \X9b.
The linux/putty m1b and m2 entries (also for minitel) don't support
color to begin with and the sequences they have in their terminfo
entries are control characters anyway, so the calculation would still
add up.
In turn, what we gain from this is much faster width calculations with
unrecognized escapes -
e.g. `string length -V \efoo` is sped up by a factor of 20.
An alternative would be to skip this if max_colors is > 16 as that is
the most any of these entries can do. The runtime scales linearly with
the number of colors so on those systems it would be reasonably quick anyway.
But given just *how* outdated these are I believe it is okay to just
remove support outright. I do not believe anyone has ever run fish on
any of these.
* Implement fish_wcstod_underscores
* Add fish_wcstod_underscores unit tests
* Switch to using fish_wcstod_underscores in tinyexpr
* Add tests for math builtin underscore separator functionality
* Add documentation for underscore separators for math builtin
* Add a changelog entry for underscore numeric separators
We can't always read in chunks because we often can't bear to
overread:
```fish
echo foo\nbar | begin
read -l foo
read -l bar
end
```
needs to have the first read read `foo` and the second read `bar`. So
here we can only read one byte at a time.
However, when we are directly redirected:
```fish
echo foo | read foo
```
we can, because the data is only for us anyway. The stream will be
closed after, so anything not read just goes away. Nobody else is
there to read.
This dramatically speeds up `read` of long lines through a pipe. How
much depends on the length of the line.
With lines of 5000 characters it's about 15x, with lines of 50
characters about 2x, lines of 5 characters about 1.07x.
See #8542.
This is the simple fix - if we have no valid digit, we have nothing to
return. So instead of returning a NULL, we return an error.
This is already the case for invalid octal escapes (like `\777`).
Fixes#8545
This reverts commits:
2d9e51b43ed1d9f147ec346ce8081b
The box drawing because it's entangled with the rest and we don't
currently use this anywhere I know of. Nor was it gated on terminfo,
so it could have broken things, for subjectively little gain.
Fixes#8727.
This updates widechar_width.h to one generated from
15e782aa3df9dfef436516f66f745a90b421329.
The change here is a rationalization of doublewide vs widened-in-9.
Many emoji have been moved to widened-in-9 because we now use the
correct version (this uses the *emoji* version, and emoji version 3.0
corresponds to Unicode 9).
The new --escape option means that -C is not necessarily the last option;
We have this scenario where we produce a bogus error
$ fish -c 'complete -C --escape'
complete: --escape: option requires an argument
--escape doesn't take arguments, so let the error message say -C.
A history search ends when you move the cursor, but the commandline inserted by
history search is still marked as transient. This means that the next history
search will clear the transient commandline. This means we are dropping an undo
point, for example:
echo 11
echo 1
echo autosuggestion
echo^P # commandline is "echo 1"
^A # stop history search
^P # commandline is "echo 11"
^Z # Bug: commandline goes back to "echo", but it should be "echo 1"
In the worst case, we are switching from line-search to token-search (see
the attached test case). Clearing the transient edit means the line is gone
and only the token is left on the command line.
fish outputs the result of fish_title inside an escape sequence, which
happens to be terminated by \a (BEL). It may happen that the initial
output is interrupted; fish then emits the closing BEL and that makes an
annoying beep. Output the fish_title all at once, even if a signal is
delivered (so we don't get "stuck inside" the sequence).
This is related to #8628 in that it's a "torn escape sequence."
Say the user has a multi-char binding (typically an escape sequence), and a
signal arrives partway through the binding. The signal has an event handler
which enques some readline event, for example, `repaint`. Prior to this
change, the readline event would cause the multi-char binding to fail. This
would cause bits of the escape sequence to be printed to the screen.
Fix this by noticing when a sequence was "interrupted" by a non-char event,
and then rotating a sequence of such interruptions to the front of the
queue.
Fixes#8628
readch_timed is called after reading the escape character \x1b. The escape
char may be a standalone key press or part of an escape sequence; fish
waits for a little bit (per the fish_escape_delay_ms variable) to see if
something else arrives, before treating it as standalone escape-key press.
It may happen that a signal is delivered while fish waits. Prior to this
change we would treat this signal as a "nothing was read" event, causing
escape to be wrongly treated as standalone.
Avoid this by using pselect() with a full signal mask, to ensure this call
completes.
check_exit events are generated to give the reader a chance to respond to
commands, or otherwise to return control to the reader loop. Prior to this
change they were being passed to match key bindings. This is useless since
no key binding can match a check_exit event. FLOG noisily complains about
unmatched events. So just don't pass these to mapping_execute.
