Both are plenty fast enough, but this way the output of fish_trace isn't
completely taken over by the loops (seems fair since fish_trace probably gets
used rather heavily for completions).
Part of #1842
The implementation is obviously isn't 100% vi compatible, but works good enough
for major cases
This commit depends on previous commits where jump-{to, till}-matching-bracket
motions were introduces
One issue with fish_add_path at the moment is that it is sometimes a bit too intransparent.
You'll try to add a path, but it won't appear - was that because it wasn't a directory,
or because it doesn't exist, or because it was already included?
If it isn't usable after, did fish_add_path not add it because of something or did something *else* remove it?
So we give more explanations - "skipping this because it's a file", "not setting anything because no paths are left to add", ...
fish_add_path can be used either interactively, in the commandline,
or in config.fish. That's its greatest strength, it's a very
DWIM-style command.
One of the compromises that entails, however, is that it can't really
be very loud about what it does. If it skips a path, it can't write a
warning because it might be used in config.fish.
But it *can* if it's used interactively. So we try to detect that case
and enable verbose mode automatically.
That means if you do
```fish
fish_add_path /opt/mytool/bin/mytool
```
it may tell you "Skipping path because it is a file instead of a
directory:".
The check isn't perfect, it goes through status current-command and
isatty, but it should be good for most cases (and be false in config.fish).
Don't fork/exec an external process, especially one performing IO, if we don't
have to.
This, in turn, speeds up __fish_source_cached_completions which is rather slow
under WSL (and slower than it needs to be on other platforms).
We don't set this variable ourselves, but some might set it in their config out
of habit coming from shells that don't automatically colorize ls output.
This variable overrides stdout tty detection for `ls --color=auto` (but does not
modify the behavior of `ls --color=never` or `ls --color=always` regardless of
its value) under at least the BSD version of `ls`. (Under the GNU version, it
influences colorization only if stdout *is* a tty.)
If we detect CLICOLOR_FORCE *and* we are not writing directly to the tty, we
skip colorization (by clearing-but-not-erasing `$__fish_ls_color_opt`, so that
we don't end up accidentally using its value from another scope).
c0bcd817ba removed some key bindings, including the bindings of
ESC ESC [ C for Alt-Right. the commit claimed that
"Sequences like \e\eOC are Escape followed by an SS3 arrow key which we
can already decode separately." but for whatever reason this doesn't work:
Alt-Right is broken in iTerm2 by default.
Restore the default ESC ESC [ X bindings for iTerm2 compatibility.
I've been needing this for some time to generate completions for functions that
we can dynamically generate completions for that take one or more
comma-separated values in any order.
We ignore typed control characters 33a7172ee (Revert to not inserting control
characters from keyboard input, 2024-03-02).
We used to do the same for bracketed paste but that changed in 8bf8b10f6
(Extended & human-friendly keys, 2024-03-30) which made bracketed paste
behave like fish_clipboard_paste; it inserts the exact input (minus leading
whitespace etc). At that time it wasn't clear to me which behavior was the
right one (because of the inconsistency between terminal and bracketed paste).
As reported in
https://matrix.to/#/!YLTeaulxSDauOOxBoR:matrix.org/$PEEOAoyJY-644amIio0CWmq1TkpEDdSy2QnfJdK-dco
trailing tabs in pasted text can be confusing.
There seems to be not real need to insert raw control characters into the
command line, so let's strip them when pasting.
Now the only way to insert a raw control character into the command line is
to recall it from command history. Not sure what the behavior should be for
that case, we can revisit that later. If we get rid of raw control characters
entirely, then we can also delete the new "control pictures" rendering :)
Given "abbr foo something", the input sequence
foo<space><ctrl-z><space>
would re-expand the abbreviation on the second space which is surprising
because the cursor is not at or inside the command token. This looks to be
a regression from 00432df42 (Trigger abbreviations after inserting process
separators, 2024-04-13)
Happily, 69583f303 (Allow restricting abbreviations to specific commands
(#10452), 2024-04-24) made some changes that mean the bad commit seems no
longer necessary. Not sure why it works but I'll take it.
In addition to the native Emacs undo binding, we also support ctrl-z.
On Linux, ctrl-shift-z alias ctrl-Z is the redo binding according to
https://en.wikipedia.org/wiki/Table_of_keyboard_shortcuts Let's bind allow
that.
Unfortunately ctrl-shift and ctrl-alt modified shortcuts on Linux may be
intercepted by the windowing system or the terminal. Only alt-shift seems to be
available reliably (but the shift bit should mean "extend selection" in Emacs).
iTerm2 supports CSI u so the custom bindings are no longer needed. Sequences
like \e\eOC are Escape followed by an SS3 arrow key which we can already
decode separately.
In ImageMagick 7 or later, legacy commands have been replaced with
magick. Here a new functions, defines these completions and it is
called for `magick` and `magick convert`.
fixes#7172. Closes#10307.
Co-authored-by: Mahmoud Al-Qudsi <mqudsi@neosmart.net>
We were inconsistent about this for no apparent reason.
Also cleaning up in ~/.config/fish/completions is
irrelevant by now since we moved to ~/.local/share/fish 8 years ago.
Now that the parent commit moved it again, cleaning up that one seems
reasonable.
wl-copy is a daemon process that serves its stdin to any wl-paste processes.
On Wayland, we launch it from fish_clipboard_copy. It then lives in the
same process group as fish (see `ps -o pid,pgid,comm`).
For some reason pressing ctrl-c inside the VSCode integrated terminal with
fish as the default shell kills the wl-copy process, thus clearing the
clipboard. On other terminals it works fine.
This is also reproducible by running "echo foo | wl-copy" ctrl-v ctrl-c ctrl-v
(the second ctrl-v does not paste because wl-copy was killed).
Work around this for now by running wl-copy asynchronously, and disowning it.
This seems to fix it though I really don't know why. Alternatively we could
"setsid" but that's technically not available on BSD.
For some reason this works in Bash. We should strace it to figure out why.
alt-d used to do that until evil merge[*] 213e90704 (Merge remote-tracking branch
'upstream/master' into bind_mode, 2014-01-15) which changed the order of
the \ed bindings such that the smart dirh version would be shadowed by the
simpler ones.
[*] git blame alone failed to find it because it skips merge commits.
This is another problem that has been bothering me for years: as mentioned
in 1dd901e52 (Maintain cursor in history prefix search, 2024-04-12), up-arrow
search highlights search matches but the contrast is really bad, especially in
command position, because the search matches --background=brblack is combined
with whatever foreground syntax highlighting the command has. The history
pager had a similar problem (for the selected history item) but circumented
it by disabling syntax highlighting altogether for the selected item.
fish_color_search_match's foreground component is ignored.
Let's use it instead of syntax highlighting.
This fixes the contrast on some default colorschemes but the bryellow
foreground looks weirdly like an error/warning on some terminals. Change it
to white. This needs a hack because we don't have a canonical way to tell
if a uvar has been set by the user. Fortunately the foreground component
hasn't been used at all so far, so we're not so much changing it as much as
initializing it.
Indented multiline commandlines look ugly in an external editor. Also,
fish doesn't properly handle the case when the editor runs fish_indent.
Fix is by indenting when exporting the commandline and un-indenting when
importing the commandline again.
Unindent only if the file is properly indented (meaning at least by the
amount fish would use). Another complication is that we need to offset
cursor positions by the indentation.
This approach exposes "fish_indent --only-indent" and "--only-unindent"
though I don't imagine they are useful for others so I'm not sure if this
is the right place and whether we should even document it.
One alternative is to add "commandline --indented" to handle indentation
transparently.
So "commandline --indented" would print a indented lines,
and "commandline --indented 'if true' ' echo'" would remove the unecessary
indentation before replacing the commandline.
That would probably simplify the logic for the cursor position offset.
On
a;
we don't expand the abbreviation because the cursor is right of semicolon,
not on the command token. Fix this by making sure that we call expand-abbr
with the cursor on the semicolon which is the end of the command token.
(Now that our bind command execution order is less surprising, this is doable.)
This means that we need to fix the cursor after successfully expanding
an abbreviation. Do this by setting the position explicitly even when no
--set-position is in effect.
An earlier version of this patch used
bind space self-insert backward-char expand-abbr or forward-char
The problem with that (as a failing test shows) was that given "abbr m
myabbr", after typing "m space ctrl-z", the cursor would be after the "m",
not after the space. The second space removes the space, not changing the
cursor position, which is weird. I initially tried to fix this by adding
a hack to the undo group logic, to always restore the cursor position from
when begin-undo-group was used.
bind space self-insert begin-undo-group backward-char expand-abbr end-undo-group or forward-char
However this made test_torn_escapes.py fail for mysterious reasons.
I believe this is because that test registers and triggers a SIGUSR1 handler;
since the signal handler will rearrange char events, that probably messes
with the undo group guards.
I resorted to adding a tailor-made readline cmd. We could probably remove
it and give the new behavior to expand-abbr, not sure.
Fixes#9730
Some of these handled multiline prompts but not multiline command lines. We
first need to move the cursor to the end of the commandline, then we can
print a message. Finally, we need to move the cursor back to where it was.
This allows terminals like foot and kitty to
* scroll to the previous/next prompt with ctrl-shift-{z,x}
* pipe the last command's output to a pager with ctrl-shift-g
Kitty has existing fish shell integration
shell-integration/fish/vendor_conf.d/kitty-shell-integration.fish which we
can simplify now. They keep a state variable to decide which of prompt start,
command start or command end to output. I think with our implementation
this is no longer necessary, at least I couldn't reproduce any difference.
We also don't need to hook into fish_cancel or fish_posterror like they do;
only in the one place where we actually draw the prompt.
As mentioned in the above shell integration script, kitty disables reflow
when it sees an OSC 133 marker, so we need to do it ourselves,
otherwise the prompt will go blank after a terminal resize.
Closes#10352
Similar to 20bbdb68f (Set terminal title unconditionally, 2024-03-30).
While at it, get rid of a few unnecessary guards (we are never called from
a command substitution, so the check only adds confusion).
I'm not sure if it's worth supporting a terminal that mishandles unknown OSC
and CSI sequences. Better to fix the terminal. Note that there are Emacs
terminals available that don't have this problems; for example "vterm".
See the changelog additions for user-visible changes.
Since we enable/disable terminal protocols whenever we pass terminal ownership,
tests can no longer run in parallel on the same terminal.
For the same reason, readline shortcuts in the gdb REPL will not work anymore.
As a remedy, use gdbserver, or lobby for CSI u support in libreadline.
Add sleep to some tests, otherwise they fall (both in CI and locally).
There are two weird failures on FreeBSD remaining, disable them for now
https://github.com/fish-shell/fish-shell/pull/10359/checks?check_run_id=23330096362
Design and implementation borrows heavily from Kakoune.
In future, we should try to implement more of the kitty progressive
enhancements.
Closes#10359
To do so add an ad-hoc "commandline --search-field" to operate on pager
search field.
This is primarily motivated because a following commit reuses the
fish_clipboard_paste logic for bracketed paste. This avoids a regression.
Unfortunately on Debian "open" is a symlink to "openvt", and there's
no way from outside to tell.
This prevents fish from failing because no browser could be found.
Today fish_cursor_selection_mode controls whether selection mode includes
the cursor. Since it's by default only used for Vi mode, perhaps use it to
also decide whether it should be allowed to select one-past the last character.
Not allowing to select to select one-past the last character is much nicer
in Vi mode. Unfortunately Vi mode sometimes needs to temporarily select
past end (using forward-single-char and such), so reset fish_cursor_selection_mode
for the duration of the binding.
Also fix other things like cursor placement after yank/yank-pop.
Closes#10286Closes#3299
We have
bind --preset -M $mode --sets-mode paste \e\[200~ __fish_start_bracketed_paste
Commit c3cd68dda (Process shell commands from bindings like regular char
events, 2024-03-02) made it so __fish_start_bracketed_paste is no longer
executed before the bind mode is updated.
This is a long-awaited fix but it broke __fish_start_bracketed_paste's
assumption that $fish_bind_mode is the mode before we entered paste mode.
This means we never exit paste mode.
Work around that. I forgot about this issue because I already replaced our
bracketed paste handling on my fork.
Today,
bind foo "commandline -f expand-abbr; commandline -i \n"
does not work because this
1. enqueues an expand-abbr readline event
2. "commandline -i" inserts \n
3. processes the expand-abbr readline event
Since there is no abbreviation on the new line, this doesn't do anything.
PR https://github.com/fish-shell/fish-shell/pull/9398 would fix this
particular instance however it does not fix the issue that "commandline -i"
is run before the expand-abbr is processed by the reader. This is harmless
here but there would be a problem if "commandline" tried to read commandline
state that was created by a preceding command.
It's not super clear to me whether the above binding should work as one
would naively expect. That would imply that "commandline" would need to
drain all input events (at least all synthetic ones) from the input queue,
to ensure it sees the current state.
Fortunately the parent commit makes it so if we separate them
bind foo "commandline -f expand-abbr" "commandline -i \n"
both will be separate events and the commandline state will be synced after
each of them. This fixes abbreviation expansion here.
Also, we can now mix readline cmds and shell commands, which makes it shorter.
Most chat programs I found use Shift+Return to insert a newline while plain
Return sends the message. One user reported having only tried Shift+Return
and not knowing about Alt+Return.
No release notes yet because this only works on a very small number of
terminals. Once we enable CSI u, this should work on most modern terminals.
Unless the editor changed to a different file for some reason.
Note that the Kakoune integration uses -always to export the cursor even if
the user temporarily suppressed hooks - possibly a "fish_indent" hook.
One of the things that keep me from using Vi mode is that it doesn't define an
insert-mode shortcut to accept autosuggestions. Let's use Control-N because
that Vim key is the closest equivalent.
Closes#10339
... even if the file hasn't changed. This addresses an oddity in the following
case:
* Shell is started,
* function `foo` is sourced from foo.fish
* foo.fish is *externally* edited and saved
* <Loaded definition of `foo` is now stale, but fish is unaware>
* `funced foo` loads `type -p foo` showing changed definition, user exits
$EDITOR saving no changes (or with $status 0, more generally).
* Stale definition of `foo` remains
If a hostname starts with a dash `-` character, the prompt_hostname function
fails because the `string` function interprets it as an option instead
of an argument.
Inserting Tab or Backspace characters causes weird glitches. Sometimes it's
useful to paste tabs as part of a code block.
Render tabs as "␉" and so on for other ASCII control characters, see
https://unicode-table.com/en/blocks/control-pictures/. This fixes the
width-related glitches.
You can see it in action by inserting some control characters into the
command line:
set chars
for x in (seq 1 0x1F)
set -a chars (printf "%02x\\\\x%02x" $x $x)
end
eval set chars $chars
commandline -i "echo '" $chars
Fixes#6923Fixes#5274Closes#7295
We could extend this approach to display a fallback symbol for every unknown
nonprintable character, not just ASCII control characters.
In future we might want to support tab properly.
Fish functions are great for configuring fish but they don't integrate
seamlessly with the rest of the system. For tasks that can run outside fish,
writing scripts is the natural approach.
To edit my scripts I frequently run
$EDITOR (which my-script)
Would be great to reduce the amount typing for this common case (the names
of editor and scripts are usually short, so that's a lot of typing spent on
the boring part).
Our Alt+o binding opens the file at the cursor in a pager. When the cursor
is in command position, it doesn't do anything (unless the command is actually
a valid file path). Let's make it open the resolved file path in an editor.
In future, we should teach this binding to delegate to "funced" upon seeing
a function instead of a script. I didn't do it yet because funced prints
messages, so it will mess with the commandline rendering if used from
a binding. (The fact that funced encourages overwriting functions that
ship with fish is worrysome. Also I'm not sure why funced doesn't open the
function's source file directly (if not sourced from stdin). Persisting the
function should probably be the default.)
Alternative approach: I think other shells expand "=my-script" to
"/path/to/my-script". That is certainly an option -- if we do that we'd want
to teach fish to complete command names after "=". Since I don't remember
scenarios where I care about the full path of a script beyond opening it in
my editor, I didn't look further into this.
Closes#10266
gpg's --use-embedded-filename is a dangerous option that can cause gpg
to write arbitrary content to arbitrary files.
According to the GnuPG maintainer, this is not an option recommended
for use (https://dev.gnupg.org/T4500). Fish shouldn't encourage users
to supply it.
I've offered https://dev.gnupg.org/T6972 to upstream to make it even
more clear that this option is a bad idea.
While removing it, we might as well also remove
--no-use-embedded-filename, since it is effectively a no-op.
Instead of skipping for non-interactive shells, skip when stdin is not a tty.
This allows the cursor to be set for scripts that use the `read` command.
Fix cases like
eval my-cmd (commandline -o)
complete -C "my-cmd $(commandline -o)"
In both cases, we spuriously evaluate tokens like "(inside-quoted-string)"
as command substitutions. Fix this by escaping the strings. The momentarily
regresses the intended purpose of "eval" -- to expand variables -- but the
next commit will fix that.
We're already moving them, we can remove the awkward dot that hides
them, and while we're doing that remove the useless $USER as well.
Most systems will have only one of these files - it's rare to run a
second package manager (especially for anything more than
bootstrapping a container).
We have a lot of completions that look like
```fish
pip completion --fish 2>/dev/null | source
```
That's *fine*, upstream gives us some support.
However, the scripts they provide change very rarely, usually not even
every release, and so running them again for every shell is extremely
wasteful.
In particular the python tools are very slow, `pip completion --fish`
takes about 180ms on my system with a hot cache, which is quite
noticeable.
So what we do is we run them once, store them in a file in our cache
directory, and then serve from that.
We store the mtime of the command we ran, and compare against that for
future runs. If the mtime differs - so if the command was up or
downgraded, we run it again.
This will move all current cache uses to e.g. ~/.cache/fish/
That's better anyway because it makes it easier to remove.
Also it allows supplying a subdir so you can do `__fish_make_cache_dir
completions`
to get ~/.cache/fish/completions.
If I alias "e" to "emacsclient" it will probably accept the same options.
Let's dereference the alias so we can detect support for passing the cursor
position in more cases.
This does not solve the problem for recursive cases (e.g. alias of another
alias). If we want to handle that we would need cycle detection.
This makes it easier to get *any pager* in the number of places we do.
Unfortunately:
1. It can't just execute the pager because that might block
2. We can't really set the necessary options for less here
so they still need to be set outside.
This
Fixes#10074
by falling back to `cat` in that case. We could also decide to abort
instead of using a non-pager, but for history that's probably fine.
