Remove the last non scoped place where we disable protocols (just before
exec(1)); it's not necessary with the current approach because we always
disable inside eval.
There is an edge case where we don't:
fish -ic "exec bash"
leaving bash with CSI u enabled. Disable that also in -ic mode where we
don't have a reader.
In future we should use the same approach for restore_term_mode() but I'm
not sure which one is better.
We enable terminal protocols once at startup, and disable them before exit.
Additionally, we disable them while evaluating commands (see 8164855b7 (Disable
terminal protocols throughout evaluation, 2024-04-02))..
Thirdly, we re-enable protocols inside builtin read (where it's disabled
because we are evaluating something). All of these three are scoped and
statically guaranteed to not leak into each others scopes.
There is another place where we enable protocols non-scoped: when we
receive a notification that a job is stopped. If this is ever hit, things
will be imbalanced and we'll fail to restore the right terminal state,
or (more likely) crash due the assertion in terminal_protocols_enable().
This code path used to be necessary when we disabled protocols only while
actually executing an external command but we changed that in 8164855b7,
so it should no longer be. Remove it.
I haven't been able to find a test case, I'll try to do that later.
The main reason we changed the scope of protocols was focus reporting (#10408).
We have given up on that for now (outside tmux where I can't get it to work)
so we might want to reconsider and go back to the "optimized" approach of
enabling it for as long as possible. But this is simpler, easier to verify.
Try to keep the "backwards-incompatible" section reasonably short so
people can get a quick overview of what they need to handle.
So we split the "bind" part into two.
This tries to open the given file to use as stdin, and if it fails,
for any reason, it uses /dev/null instead.
This is useful in cases where we would otherwise do either of these:
```fish
test -r /path/to/file
and string match foo < /path/to/file
cat /path/to/file 2>/dev/null | string match foo
```
This both makes it nicer and shorter, *and* helps with TOCTTOU - what if the file is removed/changed after the check?
The reason for reading /dev/null instead of a closed fd is that a closed fd will often cause an error.
In case opening /dev/null fails, it still skips the command.
That's really a last resort for when the operating system
has turned out to be a platypus and not a unix.
Fixes#4865
(cherry picked from commit df8b9b7095)
wl-copy is a daemon process that serves its stdin to any wl-paste processes.
On Wayland, we launch it from fish_clipboard_copy. It then lives in the
same process group as fish (see `ps -o pid,pgid,comm`).
For some reason pressing ctrl-c inside the VSCode integrated terminal with
fish as the default shell kills the wl-copy process, thus clearing the
clipboard. On other terminals it works fine.
This is also reproducible by running "echo foo | wl-copy" ctrl-v ctrl-c ctrl-v
(the second ctrl-v does not paste because wl-copy was killed).
Work around this for now by running wl-copy asynchronously, and disowning it.
This seems to fix it though I really don't know why. Alternatively we could
"setsid" but that's technically not available on BSD.
For some reason this works in Bash. We should strace it to figure out why.
This introduces a feature flag, "test-require-arg", that removes builtin test's zero and one argument special modes.
That means:
- `test -n` returns false
- `test -z` returns true
- `test -x` with any other option errors out with "missing argument"
- `test foo` errors out as expecting an option
`test -n` returning true is a frequent source of confusion, and so we are breaking with posix in this regard.
As always the flag defaults to off and can be turned on. In future it will default to on and then eventually be made read-only.
There is a new FLOG category "deprecated-test", run `fish -d deprecated-test` and it will show any test call that would change in future.
This seems a bit better because it's what bind uses. To makes sure that
something like :kbd:`ctrl-x` looks good in HTML, remove the border from the
kbd style. Else both "ctrl" and "x" get small boxes which looks weird.
When writing scripts for other shells, it can be confusing and annoying
that our `man` function shadows other manual pages, for example `exec(1p)`
from [Linux man-pages]. I almost never want to see the fish variant for such
contended cases (which obviuosly don't include fish-specific commands like
`string`, only widely-known shell builtins).
For the contented cases like `exec`, the POSIX documentation is more
substantial and useful, since it describes a (sub)set of languages widely
used for scripting.
Because of this I think we should stop overriding the system's man pages.
Nowadays we offer `exec -h` as intuitive way to show the documentation for
the fish-specific command (note that `help` is not a good replacement because
it uses a web browser).
Looking through the contended commands, it seems like for most of them,
the fish version is not substantially different from the system version.
A notable exception is `read` but I don't think it's a very important one.
So I think we should can sacrifice a bit of the native fish-scripting
experience in exchange for playing nicer with other shells. I think the
latter is more important because scripting is not our focus, the way I see it.
So maybe put our manpath at the end.
In lieu of that, let's at least have `exec.rst` reference the system variant.
[Linux man-pages]: https://www.kernel.org/doc/man-pages/Closes#10376
This is similar to f7dac82ed (Escape separators (colon and equals) to improve
completion, 2019-08-23) except we only escape : and = if they are the result of
file completions. This way we avoid issues with custom completions like dd.
This also means that it won't work for things like __fish_complete_suffix
[*] but that can be fixed later, once we can serialize the DONT_ESCAPE flag.
By moving the escaping step earlier, this causes some unit test changes
which should not result in actual behavior change.
See also #6099
[*]: The new \: and \= does not leak from "complete -C" because that command
unescapes its output -- unless --escape is given.
alt-d used to do that until evil merge[*] 213e90704 (Merge remote-tracking branch
'upstream/master' into bind_mode, 2014-01-15) which changed the order of
the \ed bindings such that the smart dirh version would be shadowed by the
simpler ones.
[*] git blame alone failed to find it because it skips merge commits.
Another consequence of a583fe723 ("commandline -f foo" to skip queue
and execute immediately, 2024-04-08) is that "commandline -f repaint"
will paint the prompt with the current value of $status which might be
set from a shell command in a the currently executing binding, instead of
waiting for the top-level status. This is wrong, at least historically. It
surfaces in bindings like alt-w which always paint a status value of [1]
when on single-lines commandlines.
Another regression is that a redundant repaint in a signal handler outputs
an extra prompt.
Fix both by making repaint commands go over the input queue again. This way,
they are always run with a good commandline state. There is no need to
repaint immediately because I don't think anyone has a data dependency on it
(we currently don't expose the prompt string), it's only for rendering.
We sometimes leak ^[[I and ^[[O focus reporting events when run from VSCode's
"Run python file" button in the top right corner. To reproduce I installed
the ms-python extension set the VSCode default shell to fish and repeatedly
ran a script that does "time.sleep(1)". I believe VSCode synthesizes keys
and triggers a race condition.
We can probably fix this but I'm not sure when I'll get to it (given how
relatively unimportant this feature is).
So let's go back to the old behavior of only enabling focus reporting in tmux.
I believe that tmux is affected by the same VSCode issue (also on 3.7.1 I
think) but I haven't been able to get tmux to emit focus reporting sequences
yet. Still, keep it to not regress cursor shape (#4788). So far this is
the only motivation for focus reporting and I believe it is only relevant
for terminals that can split windows (though there are a bunch that do).
Closes#10448
There seem to be versions of ssh (possibly not from OpenSSH) that don't
print the version number in -V, so make sure not to pass an empty string as
numeric arg to test.
Fixes#10445
While it does need to store the string, we also need to use the string after
storing it, so we aren't getting any advantage from passing by value. Just pass
by reference to simplify the call sites.
This is another problem that has been bothering me for years: as mentioned
in 1dd901e52 (Maintain cursor in history prefix search, 2024-04-12), up-arrow
search highlights search matches but the contrast is really bad, especially in
command position, because the search matches --background=brblack is combined
with whatever foreground syntax highlighting the command has. The history
pager had a similar problem (for the selected history item) but circumented
it by disabling syntax highlighting altogether for the selected item.
fish_color_search_match's foreground component is ignored.
Let's use it instead of syntax highlighting.
This fixes the contrast on some default colorschemes but the bryellow
foreground looks weirdly like an error/warning on some terminals. Change it
to white. This needs a hack because we don't have a canonical way to tell
if a uvar has been set by the user. Fortunately the foreground component
hasn't been used at all so far, so we're not so much changing it as much as
initializing it.
On Konsole with
function my-bindings
bind --preset --erase escape
bind escape,i 'echo escape i'
end
set fish_key_bindings my-bindings
the "escape,i" binding doesn't trigger. This is because of our special
handling of the escape key prefix. Other multi-key bindings like "bind j,k"
wait indefinitely for the second character. But not "escape,i"; that one
has historically had a low timeout (fish_escape_delay_ms). The motivation
is probably that we have a "escape" binding as well that shouldn't wait
indefinitely.
We can distinguish between the case of raw escape sequence binding like "\e123"
and a binding that talks about the actual escape key like "escape,i". For the
latter we don't need the special treatment of having a low timeout, so make it
fall back to "fish_sequence_key_delay_ms" which waits indefinitely by default.
Indented multiline commandlines look ugly in an external editor. Also,
fish doesn't properly handle the case when the editor runs fish_indent.
Fix is by indenting when exporting the commandline and un-indenting when
importing the commandline again.
Unindent only if the file is properly indented (meaning at least by the
amount fish would use). Another complication is that we need to offset
cursor positions by the indentation.
This approach exposes "fish_indent --only-indent" and "--only-unindent"
though I don't imagine they are useful for others so I'm not sure if this
is the right place and whether we should even document it.
One alternative is to add "commandline --indented" to handle indentation
transparently.
So "commandline --indented" would print a indented lines,
and "commandline --indented 'if true' ' echo'" would remove the unecessary
indentation before replacing the commandline.
That would probably simplify the logic for the cursor position offset.
When we read bytes like \xfc that don't produce a Unicode code point,
we encode them in a Unicode private use area.
This encoding should be transparent to the user.
We accidentally add it to uvar files as \uf6fc in this case. When reading
it back, read_unquoted_escape() will fail at the "fish_reserved_codepoint(c)"
check. This check is to avoid external input being misinterpreted
as one of our in-band signalling characters like ANY_CHAR (for *).
For encoded raw bytes, this check probably doesn't really matter in terms of
security because the only thing we do with these bytes is convert them back
to raw. So we could allow unescaping them at this point, thus supporting
old uvar files.
However that seems like the wrong direction. PUA encoding should never leak.
So let's instead make sure to serialize it as \xfc instead of \f6fc going
forward.
Fixes#10313
