use crate::builtins::shared::{STATUS_CMD_ERROR, STATUS_CMD_OK, STATUS_READ_TOO_MUCH};
use crate::common::{str2wcstring, wcs2string, EMPTY_STRING};
use crate::fd_monitor::{
    FdMonitor, FdMonitorItem, FdMonitorItemId, ItemWakeReason, NativeCallback,
};
use crate::fds::{make_autoclose_pipes, wopen_cloexec, AutoCloseFd, PIPE_ERROR};
use crate::ffi;
use crate::flog::{should_flog, FLOG, FLOGF};
use crate::global_safety::RelaxedAtomicBool;
use crate::job_group::JobGroup;
use crate::path::path_apply_working_directory;
use crate::redirection::{RedirectionMode, RedirectionSpecList};
use crate::signal::sigchecker_t;
use crate::topic_monitor::topic_t;
use crate::wchar::{wstr, WString, L};
use crate::wutil::{perror, wdirname, wstat, wwrite_to_fd};
use errno::Errno;
use libc::{EAGAIN, EEXIST, EINTR, ENOENT, ENOTDIR, EPIPE, EWOULDBLOCK, O_EXCL, STDERR_FILENO};
use std::cell::UnsafeCell;
use std::sync::{Arc, Condvar, Mutex, MutexGuard, RwLock, RwLockReadGuard};
use std::{os::fd::RawFd, rc::Rc};
use widestring_suffix::widestrs;

/// separated_buffer_t represents a buffer of output from commands, prepared to be turned into a
/// variable. For example, command substitutions output into one of these. Most commands just
/// produce a stream of bytes, and those get stored directly. However other commands produce
/// explicitly separated output, in particular `string` like `string collect` and `string split0`.
/// The buffer tracks a sequence of elements. Some elements are explicitly separated and should not
/// be further split; other elements have inferred separation and may be split by IFS (or not,
/// depending on its value).
#[derive(Clone, Copy, PartialEq, Eq)]
pub enum SeparationType {
    /// this element should be further separated by IFS
    inferred,
    /// this element is explicitly separated and should not be further split
    explicitly,
}

pub struct BufferElement {
    contents: Vec<u8>,
    separation: SeparationType,
}

impl BufferElement {
    pub fn new(contents: Vec<u8>, separation: SeparationType) -> Self {
        BufferElement {
            contents,
            separation,
        }
    }
    pub fn is_explicitly_separated(&self) -> bool {
        self.separation == SeparationType::explicitly
    }
}

/// A separated_buffer_t contains a list of elements, some of which may be separated explicitly and
/// others which must be separated further by the user (e.g. via IFS).
pub struct SeparatedBuffer {
    /// Limit on how much data we'll buffer. Zero means no limit.
    buffer_limit: usize,
    /// Current size of all contents.
    contents_size: usize,
    /// List of buffer elements.
    elements: Vec<BufferElement>,
    /// True if we're discarding input because our buffer_limit has been exceeded.
    discard: bool,
}

impl SeparatedBuffer {
    pub fn new(limit: usize) -> Self {
        SeparatedBuffer {
            buffer_limit: limit,
            contents_size: 0,
            elements: vec![],
            discard: false,
        }
    }

    /// \return the buffer limit size, or 0 for no limit.
    pub fn limit(&self) -> usize {
        self.buffer_limit
    }

    /// \return the contents size.
    pub fn size(&self) -> usize {
        self.contents_size
    }

    /// \return whether the output has been discarded.
    pub fn discarded(&self) -> bool {
        self.discard
    }

    /// Serialize the contents to a single string, where explicitly separated elements have a
    /// newline appended.
    pub fn newline_serialized(&self) -> Vec<u8> {
        let mut result = vec![];
        result.reserve(self.size());
        for elem in &self.elements {
            result.extend_from_slice(&elem.contents);
            if elem.is_explicitly_separated() {
                result.push(b'\n');
            }
        }
        result
    }

    /// \return the list of elements.
    pub fn elements(&self) -> &[BufferElement] {
        &self.elements
    }

    /// Append the given data with separation type \p sep.
    pub fn append(&mut self, data: &[u8], sep: SeparationType) -> bool {
        if !self.try_add_size(data.len()) {
            return false;
        }
        // Try merging with the last element.
        if sep == SeparationType::inferred && self.last_inferred() {
            self.elements
                .last_mut()
                .unwrap()
                .contents
                .extend_from_slice(data);
        } else {
            self.elements.push(BufferElement::new(data.to_vec(), sep));
        }
        true
    }

    /// Remove all elements and unset the discard flag.
    pub fn clear(&mut self) {
        self.elements.clear();
        self.contents_size = 0;
        self.discard = false;
    }

    /// \return true if our last element has an inferred separation type.
    fn last_inferred(&self) -> bool {
        !self.elements.is_empty() && !self.elements.last().unwrap().is_explicitly_separated()
    }

    /// If our last element has an inferred separation, return a pointer to it; else nullptr.
    /// This is useful for appending one inferred separation to another.
    fn last_if_inferred(&self) -> Option<&BufferElement> {
        if self.last_inferred() {
            self.elements.last()
        } else {
            None
        }
    }

    /// Mark that we are about to add the given size \p delta to the buffer. \return true if we
    /// succeed, false if we exceed buffer_limit.
    fn try_add_size(&mut self, delta: usize) -> bool {
        if self.discard {
            return false;
        }
        let proposed_size = self.contents_size + delta;
        if proposed_size < delta || (self.buffer_limit > 0 && proposed_size > self.buffer_limit) {
            self.clear();
            self.discard = true;
            return false;
        }
        self.contents_size = proposed_size;
        true
    }
}

/// Describes what type of IO operation an io_data_t represents.
#[derive(Clone, Copy)]
pub enum IoMode {
    file,
    pipe,
    fd,
    close,
    bufferfill,
}

/// Represents a FD redirection.
pub trait IoData {
    /// Type of redirect.
    fn io_mode(&self) -> IoMode;
    /// FD to redirect.
    fn fd(&self) -> RawFd;
    /// Source fd. This is dup2'd to fd, or if it is -1, then fd is closed.
    /// That is, we call dup2(source_fd, fd).
    fn source_fd(&self) -> RawFd;
    fn print(&self);
    // The address of the object, for comparison.
    fn as_ptr(&self) -> *const ();
}

pub struct IoClose {
    fd: RawFd,
}
impl IoClose {
    pub fn new(fd: RawFd) -> Self {
        IoClose { fd }
    }
}
impl IoData for IoClose {
    fn io_mode(&self) -> IoMode {
        IoMode::close
    }
    fn fd(&self) -> RawFd {
        self.fd
    }
    fn source_fd(&self) -> RawFd {
        -1
    }
    fn print(&self) {
        fwprintf!(STDERR_FILENO, "close %d\n", self.fd)
    }
    fn as_ptr(&self) -> *const () {
        (self as *const Self).cast()
    }
}

pub struct IoFd {
    fd: RawFd,
    source_fd: RawFd,
}
impl IoFd {
    /// fd to redirect specified fd to. For example, in 2>&1, source_fd is 1, and io_data_t::fd
    /// is 2.
    pub fn new(fd: RawFd, source_fd: RawFd) -> Self {
        IoFd { fd, source_fd }
    }
}
impl IoData for IoFd {
    fn io_mode(&self) -> IoMode {
        IoMode::fd
    }
    fn fd(&self) -> RawFd {
        self.fd
    }
    fn source_fd(&self) -> RawFd {
        self.source_fd
    }
    fn print(&self) {
        fwprintf!(STDERR_FILENO, "FD map %d -> %d\n", self.source_fd, self.fd)
    }
    fn as_ptr(&self) -> *const () {
        (self as *const Self).cast()
    }
}

/// Represents a redirection to or from an opened file.
pub struct IoFile {
    fd: RawFd,
    // The fd for the file which we are writing to or reading from.
    file_fd: AutoCloseFd,
}
impl IoFile {
    pub fn new(fd: RawFd, file_fd: AutoCloseFd) -> Self {
        IoFile { fd, file_fd }
        // Invalid file redirections are replaced with a closed fd, so the following
        // assertion isn't guaranteed to pass:
        // assert(file_fd_.valid() && "File is not valid");
    }
}
impl IoData for IoFile {
    fn io_mode(&self) -> IoMode {
        IoMode::file
    }
    fn fd(&self) -> RawFd {
        self.fd
    }
    fn source_fd(&self) -> RawFd {
        self.file_fd.fd()
    }
    fn print(&self) {
        fwprintf!(STDERR_FILENO, "file %d -> %d\n", self.file_fd.fd(), self.fd)
    }
    fn as_ptr(&self) -> *const () {
        (self as *const Self).cast()
    }
}

/// Represents (one end) of a pipe.
pub struct IoPipe {
    fd: RawFd,
    // The pipe's fd. Conceptually this is dup2'd to io_data_t::fd.
    pipe_fd: AutoCloseFd,
    /// Whether this is an input pipe. This is used only for informational purposes.
    is_input: bool,
}
impl IoPipe {
    pub fn new(fd: RawFd, is_input: bool, pipe_fd: AutoCloseFd) -> Self {
        assert!(pipe_fd.is_valid(), "Pipe is not valid");
        IoPipe {
            fd,
            pipe_fd,
            is_input,
        }
    }
}
impl IoData for IoPipe {
    fn io_mode(&self) -> IoMode {
        IoMode::pipe
    }
    fn fd(&self) -> RawFd {
        self.fd
    }
    fn source_fd(&self) -> RawFd {
        self.pipe_fd.fd()
    }
    fn print(&self) {
        fwprintf!(
            STDERR_FILENO,
            "pipe {%d} (input: %s) -> %d\n",
            self.source_fd(),
            if self.is_input { "yes" } else { "no" },
            self.fd
        )
    }
    fn as_ptr(&self) -> *const () {
        (self as *const Self).cast()
    }
}

/// Represents filling an io_buffer_t. Very similar to io_pipe_t.
pub struct IoBufferfill {
    target: RawFd,

    /// Write end. The other end is connected to an io_buffer_t.
    write_fd: AutoCloseFd,

    /// The receiving buffer.
    buffer: Arc<RwLock<IoBuffer>>,
}
impl IoBufferfill {
    /// Create an io_bufferfill_t which, when written from, fills a buffer with the contents.
    /// \returns nullptr on failure, e.g. too many open fds.
    ///
    /// \param target the fd which this will be dup2'd to - typically stdout.
    pub fn create(buffer_limit: usize, target: RawFd) -> Option<Rc<IoBufferfill>> {
        assert!(target >= 0, "Invalid target fd");

        // Construct our pipes.
        let pipes = make_autoclose_pipes()?;
        // Our buffer will read from the read end of the pipe. This end must be non-blocking. This is
        // because our fillthread needs to poll to decide if it should shut down, and also accept input
        // from direct buffer transfers.
        if ffi::make_fd_nonblocking(autocxx::c_int(pipes.read.fd())).0 != 0 {
            FLOG!(warning, PIPE_ERROR);
            perror("fcntl");
            return None;
        }
        // Our fillthread gets the read end of the pipe; out_pipe gets the write end.
        let mut buffer = Arc::new(RwLock::new(IoBuffer::new(buffer_limit)));
        begin_filling(&mut buffer, pipes.read);
        assert!(pipes.write.is_valid(), "fd is not valid");
        Some(Rc::new(IoBufferfill {
            target,
            write_fd: pipes.write,
            buffer,
        }))
    }

    pub fn buffer(&self) -> RwLockReadGuard<'_, IoBuffer> {
        self.buffer.read().unwrap()
    }

    /// Reset the receiver (possibly closing the write end of the pipe), and complete the fillthread
    /// of the buffer. \return the buffer.
    pub fn finish(filler: IoBufferfill) -> SeparatedBuffer {
        // The io filler is passed in. This typically holds the only instance of the write side of the
        // pipe used by the buffer's fillthread (except for that side held by other processes). Get the
        // buffer out of the bufferfill and clear the shared_ptr; this will typically widow the pipe.
        // Then allow the buffer to finish.
        filler
            .buffer
            .write()
            .unwrap()
            .complete_background_fillthread_and_take_buffer()
    }
}
impl IoData for IoBufferfill {
    fn io_mode(&self) -> IoMode {
        IoMode::bufferfill
    }
    fn fd(&self) -> RawFd {
        self.target
    }
    fn source_fd(&self) -> RawFd {
        self.write_fd.fd()
    }
    fn print(&self) {
        fwprintf!(
            STDERR_FILENO,
            "bufferfill %d -> %d\n",
            self.write_fd.fd(),
            self.fd()
        )
    }
    fn as_ptr(&self) -> *const () {
        (self as *const Self).cast()
    }
}

/// An io_buffer_t is a buffer which can populate itself by reading from an fd.
/// It is not an io_data_t.
pub struct IoBuffer {
    /// Buffer storing what we have read.
    buffer: Mutex<SeparatedBuffer>,

    /// Atomic flag indicating our fillthread should shut down.
    shutdown_fillthread: RelaxedAtomicBool,

    /// A promise, allowing synchronization with the background fill operation.
    /// The operation has a reference to this as well, and fulfills this promise when it exits.
    fill_waiter: Option<Arc<(Mutex<bool>, Condvar)>>,

    /// The item id of our background fillthread fd monitor item.
    item_id: FdMonitorItemId,
}

impl IoBuffer {
    pub fn new(limit: usize) -> Self {
        IoBuffer {
            buffer: Mutex::new(SeparatedBuffer::new(limit)),
            shutdown_fillthread: RelaxedAtomicBool::new(false),
            fill_waiter: None,
            item_id: FdMonitorItemId::from(0),
        }
    }

    /// Append a string to the buffer.
    pub fn append(&mut self, data: &[u8], typ: SeparationType) -> bool {
        self.buffer.lock().unwrap().append(data, typ)
    }

    /// \return true if output was discarded due to exceeding the read limit.
    pub fn discarded(&self) -> bool {
        self.buffer.lock().unwrap().discarded()
    }

    /// Read some, filling the buffer. The buffer is passed in to enforce that the append lock is
    /// held. \return positive on success, 0 if closed, -1 on error (in which case errno will be
    /// set).
    pub fn read_once(fd: RawFd, buffer: &mut MutexGuard<'_, SeparatedBuffer>) -> isize {
        assert!(fd >= 0, "Invalid fd");
        errno::set_errno(Errno(0));
        let mut bytes = [b'\0'; 4096 * 4];

        // We want to swallow EINTR only; in particular EAGAIN needs to be returned back to the caller.
        let amt = loop {
            let amt = unsafe {
                libc::read(
                    fd,
                    std::ptr::addr_of_mut!(bytes).cast(),
                    std::mem::size_of_val(&bytes),
                )
            };
            if amt < 0 && errno::errno().0 == EINTR {
                continue;
            }
            break amt;
        };
        if amt < 0 && ![EAGAIN, EWOULDBLOCK].contains(&errno::errno().0) {
            perror("read");
        } else if amt > 0 {
            buffer.append(
                &bytes[0..usize::try_from(amt).unwrap()],
                SeparationType::inferred,
            );
        }
        amt
    }

    /// End the background fillthread operation, and return the buffer, transferring ownership.
    pub fn complete_background_fillthread_and_take_buffer(&mut self) -> SeparatedBuffer {
        // Mark that our fillthread is done, then wake it up.
        assert!(self.fillthread_running(), "Should have a fillthread");
        assert!(
            self.item_id != FdMonitorItemId::from(0),
            "Should have a valid item ID"
        );
        self.shutdown_fillthread.store(true);
        fd_monitor().poke_item(self.item_id);

        // Wait for the fillthread to fulfill its promise, and then clear the future so we know we no
        // longer have one.

        let (mutex, condvar) = &**(self.fill_waiter.as_ref().unwrap());
        {
            let mut done = mutex.lock().unwrap();
            while !*done {
                done = condvar.wait(done).unwrap();
            }
        }
        self.fill_waiter = None;

        // Return our buffer, transferring ownership.
        let mut locked_buff = self.buffer.lock().unwrap();
        let mut result = SeparatedBuffer::new(locked_buff.limit());
        std::mem::swap(&mut result, &mut locked_buff);
        locked_buff.clear();
        result
    }

    /// Helper to return whether the fillthread is running.
    pub fn fillthread_running(&self) -> bool {
        return self.fill_waiter.is_some();
    }
}

/// Begin the fill operation, reading from the given fd in the background.
fn begin_filling(iobuffer: &mut Arc<RwLock<IoBuffer>>, fd: AutoCloseFd) {
    assert!(
        !iobuffer.read().unwrap().fillthread_running(),
        "Already have a fillthread"
    );

    // We want to fill buffer_ by reading from fd. fd is the read end of a pipe; the write end is
    // owned by another process, or something else writing in fish.
    // Pass fd to an fd_monitor. It will add fd to its select() loop, and give us a callback when
    // the fd is readable, or when our item is poked. The usual path is that we will get called
    // back, read a bit from the fd, and append it to the buffer. Eventually the write end of the
    // pipe will be closed - probably the other process exited - and fd will be widowed; read() will
    // then return 0 and we will stop reading.
    // In exotic circumstances the write end of the pipe will not be closed; this may happen in
    // e.g.:
    //   cmd ( background & ; echo hi )
    // Here the background process will inherit the write end of the pipe and hold onto it forever.
    // In this case, when complete_background_fillthread() is called, the callback will be invoked
    // with item_wake_reason_t::poke, and we will notice that the shutdown flag is set (this
    // indicates that the command substitution is done); in this case we will read until we get
    // EAGAIN and then give up.

    // Construct a promise. We will fulfill it in our fill thread, and wait for it in
    // complete_background_fillthread(). Note that TSan complains if the promise's dtor races with
    // the future's call to wait(), so we store the promise, not just its future (#7681).
    let promise = Arc::new((Mutex::new(false), Condvar::new()));
    iobuffer.write().unwrap().fill_waiter = Some(promise.clone());

    // Run our function to read until the receiver is closed.
    // It's OK to capture 'buffer' because 'this' waits for the promise in its dtor.
    let item_callback: Option<NativeCallback> = {
        let iobuffer = iobuffer.clone();
        Some(Box::new(
            move |fd: &mut AutoCloseFd, reason: ItemWakeReason| {
                // Only check the shutdown flag if we timed out or were poked.
                // It's important that if select() indicated we were readable, that we call select() again
                // allowing it to time out. Note the typical case is that the fd will be closed, in which
                // case select will return immediately.
                let mut done = false;
                if reason == ItemWakeReason::Readable {
                    // select() reported us as readable; read a bit.
                    let iobuf = iobuffer.write().unwrap();
                    let mut buf = iobuf.buffer.lock().unwrap();
                    let ret = IoBuffer::read_once(fd.fd(), &mut buf);
                    done =
                        ret == 0 || (ret < 0 && ![EAGAIN, EWOULDBLOCK].contains(&errno::errno().0));
                } else if iobuffer.read().unwrap().shutdown_fillthread.load() {
                    // Here our caller asked us to shut down; read while we keep getting data.
                    // This will stop when the fd is closed or if we get EAGAIN.
                    let iobuf = iobuffer.write().unwrap();
                    let mut buf = iobuf.buffer.lock().unwrap();
                    loop {
                        let ret = IoBuffer::read_once(fd.fd(), &mut buf);
                        if ret <= 0 {
                            break;
                        }
                    }
                    done = true;
                }
                if done {
                    fd.close();
                    let (mutex, condvar) = &*promise;
                    let mut done = mutex.lock().unwrap();
                    *done = true;
                    condvar.notify_one();
                }
            },
        ))
    };

    iobuffer.write().unwrap().item_id =
        fd_monitor().add(FdMonitorItem::new(fd, None, item_callback));
}

pub type IoDataRef = Rc<dyn IoData>;

#[derive(Default)]
pub struct IoChain(pub Vec<IoDataRef>);

impl IoChain {
    pub fn new() -> Self {
        Default::default()
    }
    pub fn remove(&mut self, element: &IoDataRef) {
        let element = Rc::as_ptr(element) as *const ();
        self.0.retain(|e| {
            let e = Rc::as_ptr(e) as *const ();
            !std::ptr::eq(e, element)
        });
    }
    pub fn push(&mut self, element: IoDataRef) {
        self.0.push(element);
    }
    pub fn append(&mut self, chain: &IoChain) -> bool {
        self.0.extend_from_slice(&chain.0);
        true
    }

    /// \return the last io redirection in the chain for the specified file descriptor, or nullptr
    /// if none.
    pub fn io_for_fd(&self, fd: RawFd) -> Option<IoDataRef> {
        self.0.iter().rev().find(|data| data.fd() == fd).cloned()
    }

    /// Attempt to resolve a list of redirection specs to IOs, appending to 'this'.
    /// \return true on success, false on error, in which case an error will have been printed.
    #[widestrs]
    pub fn append_from_specs(&mut self, specs: &RedirectionSpecList, pwd: &wstr) -> bool {
        let mut have_error = false;
        for spec in specs {
            match spec.mode {
                RedirectionMode::fd => {
                    if spec.is_close() {
                        self.push(Rc::new(IoClose::new(spec.fd)));
                    } else {
                        let target_fd = spec
                            .get_target_as_fd()
                            .expect("fd redirection should have been validated already");
                        self.push(Rc::new(IoFd::new(spec.fd, target_fd)));
                    }
                }
                _ => {
                    // We have a path-based redireciton. Resolve it to a file.
                    // Mark it as CLO_EXEC because we don't want it to be open in any child.
                    let path = path_apply_working_directory(&spec.target, pwd);
                    let oflags = spec.oflags();
                    let file = AutoCloseFd::new(wopen_cloexec(&path, oflags, OPEN_MASK));
                    if !file.is_valid() {
                        if (oflags & O_EXCL) != 0 && errno::errno().0 == EEXIST {
                            FLOGF!(warning, NOCLOB_ERROR, spec.target);
                        } else {
                            if should_flog!(warning) {
                                FLOGF!(warning, FILE_ERROR, spec.target);
                                let err = errno::errno().0;
                                // If the error is that the file doesn't exist
                                // or there's a non-directory component,
                                // find the first problematic component for a better message.
                                if [ENOENT, ENOTDIR].contains(&err) {
                                    let mut dname = spec.target.clone();
                                    while !dname.is_empty() {
                                        let next = wdirname(dname.clone());
                                        if let Some(md) = wstat(&next) {
                                            if !md.is_dir() {
                                                FLOGF!(
                                                    warning,
                                                    "Path '%ls' is not a directory"L,
                                                    next
                                                );
                                            } else {
                                                FLOGF!(
                                                    warning,
                                                    "Path '%ls' does not exist"L,
                                                    dname
                                                );
                                            }
                                            break;
                                        }
                                        dname = next;
                                    }
                                } else {
                                    perror("open");
                                }
                            }
                        }
                        // If opening a file fails, insert a closed FD instead of the file redirection
                        // and return false. This lets execution potentially recover and at least gives
                        // the shell a chance to gracefully regain control of the shell (see #7038).
                        self.push(Rc::new(IoClose::new(spec.fd)));
                        have_error = true;
                        continue;
                    }
                    self.push(Rc::new(IoFile::new(spec.fd, file)));
                }
            }
        }
        !have_error
    }

    /// Output debugging information to stderr.
    pub fn print(&self) {
        if self.0.is_empty() {
            fwprintf!(
                STDERR_FILENO,
                "Empty chain %s\n",
                format!("{:p}", std::ptr::addr_of!(self))
            );
            return;
        }

        fwprintf!(
            STDERR_FILENO,
            "Chain %s (%ld items):\n",
            format!("{:p}", std::ptr::addr_of!(self)),
            self.0.len()
        );
        for (i, io) in self.0.iter().enumerate() {
            fwprintf!(STDERR_FILENO, "\t%lu: fd:%d, ", i, io.fd());
            io.print();
        }
    }
}

/// Base class representing the output that a builtin can generate.
/// This has various subclasses depending on the ultimate output destination.
pub trait OutputStream {
    /// Required override point. The output stream receives a string \p s with \p amt chars.
    fn append(&mut self, s: &wstr) -> bool;

    /// \return any internally buffered contents.
    /// This is only implemented for a string_output_stream; others flush data to their underlying
    /// receiver (fd, or separated buffer) immediately and so will return an empty string here.
    fn contents(&self) -> &wstr {
        &EMPTY_STRING
    }

    /// Flush any unwritten data to the underlying device, and return an error code.
    /// A 0 code indicates success. The base implementation returns 0.
    fn flush_and_check_error(&mut self) -> libc::c_int {
        STATUS_CMD_OK.unwrap()
    }

    /// An optional override point. This is for explicit separation.
    /// \param want_newline this is true if the output item should be ended with a newline. This
    /// is only relevant if we are printing the output to a stream,
    fn append_with_separation(
        &mut self,
        s: &wstr,
        typ: SeparationType,
        want_newline: bool,
    ) -> bool {
        if typ == SeparationType::explicitly && want_newline {
            // Try calling "append" less - it might write() to an fd
            let mut buf = s.to_owned();
            buf.push('\n');
            self.append(&buf)
        } else {
            self.append(s)
        }
    }

    fn append_char(&mut self, c: char) -> bool {
        self.append(wstr::from_char_slice(&[c]))
    }
    fn push_back(&mut self, c: char) -> bool {
        self.append_char(c)
    }
    fn push(&mut self, c: char) -> bool {
        self.append(wstr::from_char_slice(&[c]))
    }

    // Append data from a narrow buffer, widening it.
    fn append_narrow_buffer(&mut self, buffer: &SeparatedBuffer) -> bool {
        for rhs_elem in buffer.elements() {
            if !self.append_with_separation(
                &str2wcstring(&rhs_elem.contents),
                rhs_elem.separation,
                false,
            ) {
                return false;
            }
        }
        true
    }
}

/// A null output stream which ignores all writes.
pub struct NullOutputStream {}

impl OutputStream for NullOutputStream {
    fn append(&mut self, _s: &wstr) -> bool {
        true
    }
}

/// An output stream for builtins which outputs to an fd.
/// Note the fd may be something like stdout; there is no ownership implied here.
pub struct FdOutputStream {
    /// The file descriptor to write to.
    fd: RawFd,

    /// Used to check if a SIGINT has been received when EINTR is encountered
    sigcheck: sigchecker_t,

    /// Whether we have received an error.
    errored: bool,
}
impl FdOutputStream {
    /// Construct from a file descriptor, which must be nonegative.
    pub fn new(fd: RawFd) -> Self {
        assert!(fd >= 0, "Invalid fd");
        FdOutputStream {
            fd,
            sigcheck: sigchecker_t::new(topic_t::sighupint),
            errored: false,
        }
    }
}
impl OutputStream for FdOutputStream {
    fn append(&mut self, s: &wstr) -> bool {
        if self.errored {
            return false;
        }
        if wwrite_to_fd(s, self.fd).is_none() {
            // Some of our builtins emit multiple screens worth of data sent to a pager (the primary
            // example being the `history` builtin) and receiving SIGINT should be considered normal and
            // non-exceptional (user request to abort via Ctrl-C), meaning we shouldn't print an error.
            if errno::errno().0 == EINTR && self.sigcheck.check() {
                // We have two options here: we can either return false without setting errored_ to
                // true (*this* write will be silently aborted but the onus is on the caller to check
                // the return value and skip future calls to `append()`) or we can flag the entire
                // output stream as errored, causing us to both return false and skip any future writes.
                // We're currently going with the latter, especially seeing as no callers currently
                // check the result of `append()` (since it was always a void function before).
            } else if errno::errno().0 != EPIPE {
                perror("write");
            }
            self.errored = true;
        }
        !self.errored
    }

    fn flush_and_check_error(&mut self) -> libc::c_int {
        // Return a generic 1 on any write failure.
        if self.errored {
            STATUS_CMD_ERROR
        } else {
            STATUS_CMD_OK
        }
        .unwrap()
    }
}

/// A simple output stream which buffers into a wcstring.
#[derive(Default)]
pub struct StringOutputStream {
    contents: WString,
}
impl OutputStream for StringOutputStream {
    fn append(&mut self, s: &wstr) -> bool {
        self.contents.push_utfstr(s);
        true
    }
    /// \return the wcstring containing the output.
    fn contents(&self) -> &wstr {
        &self.contents
    }
}

/// An output stream for builtins which writes into a separated buffer.
pub struct BufferedOutputStream {
    /// The buffer we are filling.
    buffer: Arc<RwLock<IoBuffer>>,
}
impl BufferedOutputStream {
    pub fn new(buffer: Arc<RwLock<IoBuffer>>) -> Self {
        Self { buffer }
    }
}
impl OutputStream for BufferedOutputStream {
    fn append(&mut self, s: &wstr) -> bool {
        self.buffer
            .write()
            .unwrap()
            .append(&wcs2string(s), SeparationType::inferred)
    }
    fn append_with_separation(
        &mut self,
        s: &wstr,
        typ: SeparationType,
        _want_newline: bool,
    ) -> bool {
        self.buffer.write().unwrap().append(&wcs2string(s), typ)
    }
    fn flush_and_check_error(&mut self) -> libc::c_int {
        if self.buffer.read().unwrap().discarded() {
            return STATUS_READ_TOO_MUCH.unwrap();
        }
        0
    }
}

pub struct IoStreams<'a> {
    // Streams for out and err.
    pub out: &'a dyn OutputStream,
    pub err: &'a dyn OutputStream,

    // fd representing stdin. This is not closed by the destructor.
    // Note: if stdin is explicitly closed by `<&-` then this is -1!
    pub stdin_fd: RawFd,

    // Whether stdin is "directly redirected," meaning it is the recipient of a pipe (foo | cmd) or
    // direct redirection (cmd < foo.txt). An "indirect redirection" would be e.g.
    //    begin ; cmd ; end < foo.txt
    // If stdin is closed (cmd <&-) this is false.
    pub stdin_is_directly_redirected: bool,

    // Indicates whether stdout and stderr are specifically piped.
    // If this is set, then the is_redirected flags must also be set.
    pub out_is_piped: bool,
    pub err_is_piped: bool,

    // Indicates whether stdout and stderr are at all redirected (e.g. to a file or piped).
    pub out_is_redirected: bool,
    pub err_is_redirected: bool,

    // Actual IO redirections. This is only used by the source builtin. Unowned.
    io_chain: *const IoChain,

    // The job group of the job, if any. This enables builtins which run more code like eval() to
    // share pgid.
    // FIXME: this is awkwardly placed.
    job_group: Option<Rc<JobGroup>>,
}

impl<'a> IoStreams<'a> {
    pub fn new(out: &'a dyn OutputStream, err: &'a dyn OutputStream) -> Self {
        IoStreams {
            out,
            err,
            stdin_fd: -1,
            stdin_is_directly_redirected: false,
            out_is_piped: false,
            err_is_piped: false,
            out_is_redirected: false,
            err_is_redirected: false,
            io_chain: std::ptr::null(),
            job_group: None,
        }
    }
}

/// File redirection error message.
const FILE_ERROR: &wstr = L!("An error occurred while redirecting file '%ls'");
const NOCLOB_ERROR: &wstr = L!("The file '%ls' already exists");

/// Base open mode to pass to calls to open.
const OPEN_MASK: libc::c_int = 0o666;

/// Provide the fd monitor used for background fillthread operations.
fn fd_monitor() -> &'static mut FdMonitor {
    // Deliberately leaked to avoid shutdown dtors.
    static mut FDM: *const UnsafeCell<FdMonitor> = std::ptr::null();
    unsafe {
        if FDM.is_null() {
            FDM = Box::into_raw(Box::new(UnsafeCell::new(FdMonitor::new())))
        }
    }
    let ptr: *mut FdMonitor = unsafe { (*FDM).get() };
    unsafe { &mut *ptr }
}