Since some boolean settings might be stored as string "0" or "1", the previous system no longer works, and it always sets the switch to true. The "no setting" check has been changed to reference `undefined`, so now the switch will only be defaulted to `true` if the setting truly hasn't been set.
Fixes https://github.com/flarum/core/issues/2574
Improves calculations for determining whether we are at the bottom of the notifications panel (which would trigger infinite scroll). This should be particularly effective in fixing issues on smaller screens.
We previously used the tobscure/m.attrs.bidi github repo, but that repo was recently taken offline. We decided to integrate it as a util instead of publishing it as a separate package since we seem to be the only project using it, and adopting it into a new project requires barneycarroll/mattr, which does not seem to be used anywhere.
The code added here was taken from https://github.com/askvortsov1/m.attrs.bidi, a fork (without changes) of the tobscure repo. Support for alternative module systems and ways of registering bidi were removed, and the file was formatted in compliance with our prettier config.
- Anchor scroll when inserting post placeholders
- Indicate that pages are loading at start of `loadPage`, which allows `onscroll` to not request that multiple pages be loaded at the same time
These changes are particularly applicable to firefox, where previously, dozens of posts could be skipped at a time if scroll up was held while at the top of the viewport.
- Support slug drivers for core's sluggable models, easily extends to other models
- Add automated testing for affected single-model API routes
- Fix nickname selection UI
- Serialize slugs as `slug` attribute
- Make min search length a constant
Although native browser scroll restorations have become quite powerful, it interferes with Flarum's PostStream, so if we're on a DiscussionPage, we use manual scroll restoration.
In the PostStream, `this.visibleEnd` represents the index of the last post + 1, but `loadNearIndex` treated it as if it was the index of the last post. This means that executing `goToIndex` on the post stream's current `this.visiblePost` didn't load new posts, and as a result, the requested scrolling did not occur.
This prevents an edge case where `app.discussions` is considered empty while the new page is loading, and as a result, the side pane isn't set as "enabled". Then, if the pane has previously been pinned, when the page loads and the side pane appears, it covers up part of the discussion page.
Fixes https://github.com/flarum/core/issues/2471
- Extensions now have their own pages
- The API for extensions to register permissions and settings has been overhauled via the `flarum/admin/utils/ExtensionData` util
- An extension grid has been added as a widget to the Dashboard page
- Reintroduce cancellable scroll top on page change
- IndexPage: rely on browser to retain scroll position on page reload
- Remove obsolete browser hack
- Fix broken selector
- When on mobile, only retain scroll for IndexPage if we're coming from a discussion
- Move app.cache.scrollTop save into `onbeforeremove` so we make sure to do it before DOM is detached
The default first post number is '1', so we scroll to that if we're calling `m.route.set` without a `near` parameter, as that means we're scrolling to the top.
This was present in beta 13's implementation, but accidentially omitted in 988b6c9.
We also remove unnecessary typecasting for simpler logic and increased consistency with beta 13.
The current implementation for checking whether we are on a discussion page, and going to a discussion page, checks the route we are going to. This is problematic, because the route resolver represents the route being considered, not the route we are currently on. So, if we are currently using a DiscussionPageResolver, we must be going to a route handled by DiscussionPage. Instead, we need to check the route that we are currently on, which is done via `app.current.matches(DiscussionPage)`.
- mapRoutes: don't wrap components in resolvers if they are already resolvers
- Extract defaultResolver into its own class
- Allow either route resolver instances, or components with an optional resolverClass which should accept the component and route name in its constructor.
- Introduce a resolver for DiscussionPage, so that routing from one post to another on the same discussion triggers a scroll instead of rerendering
- Add an index to reply placeholder so we can scroll to it directly when replying.
- Stop pretending that the currently broken `bottom` scroll functionality works, and explicitly call it `reply` scrolling to be clearer
- Directly get target from state
- Explicitly scroll to placeholder on reply
- Clean up scrollToItem code a bit
- Account for edge case where index is undefined when scrolling to post
Co-authored-by: Wadim Kalmykov <36057469+w-4@users.noreply.github.com>
Essentially, whenever a route is loaded, we add a key to that component. If the key changes, the page completely rerenders. Switching between different routes handled by the same key triggers those rerenders.
- If the fadeIn animation is specified on the PostStream class itself, any time we add/remove another animation, it will redo fadeIn. To avoid this, we move fadeIn into it's own css class, which is applied, and then immediately removed after the animation is completed to ensure it only runs once.
- The "fix" for flashItem was actually broken, as it resulted in 'flash' never being removed, so we never went back to .PostStream's fadeIn. We adjust flashItem to ensure that '.flash' is removed. We also remove 'fadeIn' in case it hasn't yet been removed in oncreate.
Make header and navigation components redraw after page components. Page components manipulate the header (state), but the header redraws before the page on route change. By changing the mount order, we change also the redraw order.
If the error isn't a 409, we'll want to re-throw the error so it'll be handled by the default system (showing an alert).
For simplicity, we can also move 409-handling logic out of setTimeout.
Finally, we adjust the timeout to 300 milliseconds to match the modal transition animation length.
* Revert "Fix header contents moving when opening modal (#2131)"
* Fix header contents moving when modal opened/closed.
Conditionally apply the navbar-fixed-top class only when needed, so that we can take advantage of it without always having the navbar in position:fixed, as was done in the previous solution. That resulted in a clash with custom headers.
* Show header on refresh of scrolled page
Due to some magic in Mithril 0.1's context:retain flag, some DOM elements were cached across page reloads. Since that has been eliminated, if we refresh the page and we are scrolled down, the "affix" class which makes the header fixed (and as a result, visible) isn't applied until the first scroll. We fix this by running ScrollListener.update() immediately to set initial navbar state.
When on a discussion page, the URL changing doesn't always mean we've moved to a different page. In our custom rerender logic, we only want to call `this.onNewRoute()` if the page has actually changed.
After we scroll to a post, we redraw to render post content. We then update the scrubber again so its height is accurate. This commit moves that update to AFTER our adjustment of scroll position, so that scrubber height is based on actual post heights. This fixes some subtle scrubber glitches.
Let's stay consistent with previous behavior, and run these on "internal route change" (same component handles different route) as well as on initial render of a page component.
Currently, the controls are on a new line due to the container div. We want to wrap ALL children of the alert, including the controls, in the container div.
We need to split it into a separate class so that we can add modify the alert vnode AFTER the alert component's `view` logic has been applied.
From using PhpStorm to try and see if the autocomplete works properly, it appears as it doesn't. The intention was to not have to import Mithril every time we wanted to type something with Mithril.*, but that doesn't seem to be possible - and it's not a big deal anyway
During the frontend rewrite, we introduced mithril patches for a `route` attr, and for `m.stream`. Later, we decided not to go that route, but not to remove the patches yet to avoid breaking extensions while we were finalizing the replacements. We can now remove these.
Other BC layers are for things from before beta 14, so those remain in place.
- Use Mithril.Attributes as base for ComponentAttrs, remove =any from class signature for Component
- Convert Alert to TypeScript, introduce AlertAttrs interface
- Convert AlertManagerState to TypeScript, add overload signatures for `show`, introduce AlertState interface for stored Alerts.
- Set ComponentAttrs as default T for Component
- Make attrs in AlertAttrs optional
- Add AlertIdentifier interface, simplify show type signature
- Remove mithril patch shim, as all patches onto m are now deprecated
- Use Mithril.Static for shim
- Ensure that the discussion list is cleared before it is updated with fetched results
- Rename `clear` to `deferClear`, improve documentation to make its purpose clearer.
- Call onNewRoute when page changed with same component in DiscussionPage and UserPage
- Make app.previous and app.current changed in onNewRoute, not in oninit. This way, when the route is changed, but still handled by the same component, a new PageState object will still be created.
While more pleasant from an FSM standpoint, comparing the current targetPost to the previous one does not work if goToNumber is called twice in a row for the same post. For instance, if a user clicks the mentions link to a post twice, the post stream breaks.
In some cases, such as if we've stickied a post, an event post
may have been added / removed.This means that `this.visibleEnd`
and`this.count()` will be out of sync by 1 post, but we are still
"viewing the end" of the post stream, so we should still reload
all posts up until the last one.
