* Update FontAwesome to v5.0.6
* Adapt DiscussionListItem-count icon to match FontAwesome 5 syntax
* Change icon name to match FontAwesome 5.0.6 fas icon
* Add font type prefix parameter to icon helper
* Add Enable Icon Prefix to show icon in Extension Page
* Fix invalid icon behavior
* Change icon name to match FontAwesome 5.0.6 far icon
* Use iconPrefix property on component
* Use full icon class name
* Update icon helper docblock
* Full icon class syntax
Exceptions thrown while attempting to dispatch routes are now informing the exact value that was incorrect; url for not found routes and the method when the method was invalid.
* Improve fulltext gambit
* Only search in visible posts
This change relies on the `visibility-scoping` branch to be merged.
* Change posts table to use InnoDB engine
Doing a JOIN between an InnoDB table (discussions) and a MyISAM table
(posts) is very very (very) bad for performance. FULLTEXT indexes are
fully supported in InnoDB now, and it is a superior engine in every
other way, so there is no longer any reason to be using MyISAM.
* Use ::class
* Only search for comment posts
* Add fulltext index to discussions.title
* Fix migration not working if there is a table prefix
* Update frontend appearance
* Apply fixes from StyleCI
[ci skip] [skip ci]
* Show search result excerpts on mobile
This fixes an issue where unapproved discussions (via
flarum-ext-approval) that were rejected became invisible to the user.
This solution is imperfect and some more substantial thought into how
flarum-ext-approval works is required in the future.
* Overhaul the way model visibility scoping works
- Previously post visibility scoping required concrete knowledge of the
parent discussion, ie. you needed a Discussion model on which you
would call `postsVisibleTo($actor)`. This meant that to fetch posts
from different discussions (eg. when listing user posts), it was a
convoluted process, ultimately causing #1333.
Now posts behave like any other model in terms of visibility scoping,
and you simply call `whereVisibleTo($actor)` on a Post query. This
scope will automatically apply a WHERE EXISTS clause that scopes the
query to only include posts whose discussions are visible too. Thus,
fetching posts from multiple discussions can now be done in a single
query, simplifying things greatly and fixing #1333.
- As such, the ScopePostVisibility event has been removed. Also, the
rest of the "Scope" events have been consolidated into a single event,
ScopeModelVisibility. This event is called whenever a user must have
a certain $ability in order to see a set of discussions. Typically
this ability is just "view". But in the case of discussions which have
been marked as `is_private`, it is "viewPrivate". And in the case of
discussions which have been hidden, it is "hide". etc.
The relevant API on AbstractPolicy has been refined, now providing
`find`, `findPrivate`, `findEmpty`, and `findWithPermission` methods.
This could probably do with further refinement and we can re-address
it once we get around to implementing more Extenders.
- An additional change is that Discussion::comments() (the relation
used to calculate the cached number of replies) now yields "comments
that are not private", where before it meant "comments that are
visible to Guests". This was flawed because eg. comments in non-public
tags are technically not visible to Guests.
Consequently, the Approval extension must adopt usage of `is_private`,
so that posts which are not approved are not included in the replies
count. Fundamentally, `is_private` now indicates that a discussion/
post should be hidden by default and should only be visible if it
meets certain criteria. This is in comparison to non-is_private
entities, which are visible by default and may be hidden if they don't
meet certain criteria.
Note that these changes have not been extensively tested, but I have
been over the logic multiple times and it seems to check out.
* Add event to determine whether a discussion `is_private`
See https://github.com/flarum/core/pull/1153#issuecomment-292693624
* Don't include hidden posts in the comments count
* Apply fixes from StyleCI (#1350)
Event priorities are no longer in Laravel - see dbbfc62bef
Updated the AbstractPolicy terminology to reflect the new behaviour,
which is that there is no guarantee that the catch-all methods will run
after all specific methods have run globally. This behaviour is only
guaranteed within the policy.
Turns out Container::call() does not work with invokable classes.
Thus, we need to wrap callables in a custom extender class to
support injecting any resolvable type-hint automatically.
Refs #851.
This simplifies the API and gives extension developers more
flexibility, for a) maintaining backwards compatibility, and
b) doing advanced stuff that extenders do not allow.
Note that only extenders are guaranteed to work across
different versions of Flarum (once the API surface is stable).
See the discussion in https://github.com/flarum/core/pull/1335.
This makes it more consistent with other existing extenders,
while also making registration of multiple routes more
comfortable for extension developers, and likely slightly
more performant. :-)
The change introduced in #1033 transformed any identification attribute returned from an OAuth provider to just a default value.
When the identification attribute used by the provider is the email or username, this allowed the user to supply a different email or username and still getting an already-enabled account with the credentials he entered.
Skipping attributes with an existing value makes no sense here because it's a always a fresh user and values from AbstractOAuth2Controller::getIdentification() should always be enforced.
* Add Custom Footer HTML
Straight copy from Custom Header HTML
* Move Custom Footer HTML to exactly before `</body>` tag.
* Fix invalid class name
* Append CustomFooterHTML when preparing the view.
* Some consistency in placing the variable
Loading the activated extensions now means retrieving an array of
extenders (classes that implement a certain type of extension of a core
feature in Flarum).
For now, the only existing extender is the Compat extender which is used
to handle old-style bootstrappers that simply return a closure that
receives all of its dependencies via auto injection.
In the future, extensions will be able to return an array of extender
instances from their bootstrapper instead. These extender classes will
be implemented in the next step.
Using .dev as a TLD for local development is discouraged, as at
least Chrome now enforces HTTPS for these domains.
As far as I know, by default, the MySQL root user does not have
a password on many platforms. I use it this way on my local
machine, and this makes it convenient to setup a local copy.
This prevents garbage collection to randomly break the installer:
before installation, the models that are being accessed have no
database connection.
Now, the middleware is only mounted into the forum's middleware
stack. I want API requests to have stable performance, and the
forum middleware stack is only mounted when Flarum is installed.
* Prevent saving invalid custom less
* Fix formatting
* Fix formatting again
* Move custom less format check to its own listener
* Move listener to AdminServiceProvider
* Rename listener method
ref #1025#1238. This should prevent the frontend from crashing when
opening the notifications menu, but we still need to make sure
notifications are deleted properly when subjects are deleted.
Currently not user-customizable. Just needed to display statistics for a
client, so figured I'd make a start at this. Nothing too fancy for now,
but I'm sure some people will be happy to have this information at their
fingertips.
* Returning the $default value if there's no config
This is especially important for the CookieFactory which accesses
the configuration before the application is installed
* Injecting the configuration values into the CookieFactory
I decided to put this in config.php because if cookie settings were to
be stored in the database and configured via admin UI, entering
incorrect settings could cause the admin session to be destroyed,
requiring manual database intervention to fix. But it's a good prompt
for discussion as to which kind of settings belong in config.php vs the
database. Thoughts?
Here, the order is relevant, because at this
point, the application has already been booted.
Hence, all boot() methods are called immediately,
which might depend on other service providers'
register() methods having run.
In this case, the DiscussionServiceProvider
depends on the Gate class being registered in the
container by the UserServiceProvider.
This class holds all information relevant to a local Flarum site,
such as paths and local configuration. From this information, it
is able to instantiate a Flarum\Foundation\Application instance,
which represents a Flarum installation's runtime.
This will also be useful for setting up e.g. multi-tenant
environments.
The various middleware can be registered in the service provider,
and the rest of the logic can all go through one single front
controller (index.php in flarum/flarum, and Flarum\Http\Server in
flarum/core).
This will also simplify the necessary server setup, as only one
rewrite rule remains.
They will probably be refactored away at a later stage (when we get
rid of the command bus). Until then, this lets us remove the
Flarum\Core namespace and actually feels quite clean.
* Introduce user display names
It is not uncommon for forums to be intergrated with sites where users
don't have a unique "handle" - they might just have their first name,
or a full name, which is not guaranteed to be unique.
This commit introduces the concept of "display names" for users. By
default display names are the same as usernames, but extensions may
override this and set them to something different. The important thing
is that all code should use `display_name` whenever intending to output
a human-readable name - `username` is reserved for cases where you want
to output a unique identifier (which may or may not be human-friendly).
The new "GetDisplayName" API is probably sub-optimal, but I didn't worry
too much because we can come up with something better in `next-back`.
ref #557
* Apply fixes from StyleCI
[ci skip] [skip ci]
Currently all of a post's replies are loaded in full whenever the post
is loaded, which is kind of overkill - we really just need to know that
they exist (and who posted them) in order to render the "X replied to
this" line.
This is useful for forums integrating with an external website (eg. a
WordPress site), so they can reference existing avatars directly.
For alternative storage locations (eg. S3) the best practice will still
be to store a relative path and then configure an external base "assets
URL" (this is not currently possible - TODO).
Given this change, I think it would probably make sense to rename the
column to `avatar_url` in the upcoming batch of database naming changes
- then it can contain either a relative or an absolute URL -
@franzliedke do you agree?
When running migrations for an extension without any migrations (eg.
BBCode), the migration notes for the previous extension were being
displayed, because the Migrator never had a chance to clear them.
* Update Client.php
Now forwarding exceptions from client to page in case debug mode is on. Fixes#1120.
* Update Client.php
Satisfying .. the unsatisfiable.
* Update Client.php
Satisfying again.
* flagrow/byobu#11 making posts and discussions private
* tested migrations and tested setting is_private on discussion and post manually
* added phpdoc for Post and Discussion and added the casting for these attributes
* satisfying styleci
* fixes for review
* added new private discussion event and included it in the access policy
* added new private post event and included it in the access policy
* Fix ListPostsController::applyFilters not receiving array if argument not present
* Whoops! Use `[]` instead of `array()`
* Update AbstractSerializeController.php
* Update ListPostsController.php
* Added option to hide the language selector in the header
* Added `hide_language_selector` Switch to BasicsPage
* Added `hideLanguageSelector` property to ForumSerializer
* Apparently fixed the "Add Extension" button locale.... someone must not have compiled their changes :P
* Changed hideLanguageSelector (and such) to showLanguageSelector
* Change `core.admin.basics.show_language_selector_heading` to be `_label`
* Change showLanguageSelector in ForumSerializer to be boolean, default: true
* Ooops! Remove console.log 🤦♂️
* Added `language` and `direction` properties to WebAppView
* Use properties `language` and `direction` in app.blade.php
* Added WebAppView::setDescription to set the meta description
* Whoops! Changed "ltr" to \'ltr\'. Thanks StyleCI :)
* Removed unnecessary `= null` for
* Changed `.. ? .. : ..` to `.. ?: ..`. Useful thing right there ;)
The way I read it, HTTP 405 is a generic statement about the
resource. Once a language pack is not the default, this is not
true anymore, so I figured 403 is more correct.
I want to make it a little more clear that we are checking exactly
for these two values. That may also help preventing further confusion
as to why we are not using empty() here.
Amendment to PR #1033.
* Fix dependency version constraint. (Reverts #1066.)
* Allow exceptions to be raised when dispatching middleware.
* Fix our error handler middleware (do not implement Stratigility's
error handler interface, catch exceptions instead).
See https://docs.zendframework.com/zend-stratigility/migration/to-v2/.
Closes#1069.
* Add session option to Rememberer class
* Update session login function to allow send additional data
* Add Remember me checkbox
* Cleanup login modal
This is a bit sloppy (might come up with a better solution yet), but since most events provide access to the actor but not the request, this was the easiest/quickest way to allow extensions to access the session.
Since extensions may add nested includes, we need to make sure they are eager-loaded to avoid excessive queries. For example, when the tags extension adds "tags" and "tags.state".
Laravel's `image` validation rule allows svg files to pass validation, but we can't handle svgs so it would result in an unspecified 500 error which isn't nice.
Closes#268. Not going to bother with a preview SVG or anything fancy for now – we can think about that as part of #746. Right now it's just good to finally get this functionality in!
Also need to think about apple-touch-icon, msTile stuff, and social sharing image. Not sure if this is all too much for core, but it's definitely too much for the current Appearance page layout. Again, something to think about as part of #746.
Code is a bit rough around the edges, but figured there's not much point in using the command bus properly since #870.
components/font-awesome is ~8 MB smaller than fortawesome/font-awesome because it excludes all examples/docs. Reducing dependency filesize will be important when we want to package up a .zip for distribution.
