rclone/docs/content/s3.md

---
title: "Amazon S3"
description: "Rclone docs for Amazon S3"
date: "2016-07-11"
---

<i class="fa fa-amazon"></i> Amazon S3
---------------------------------------

Paths are specified as `remote:bucket` (or `remote:` for the `lsd`
command.)  You may put subdirectories in too, eg `remote:bucket/path/to/dir`.

Here is an example of making an s3 configuration.  First run

    rclone config

This will guide you through an interactive setup process.

```
No remotes found - make a new one
n) New remote
s) Set configuration password
n/s> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
 1 / Amazon Drive
   \ "amazon cloud drive"
 2 / Amazon S3 (also Dreamhost, Ceph, Minio)
   \ "s3"
 3 / Backblaze B2
   \ "b2"
 4 / Dropbox
   \ "dropbox"
 5 / Encrypt/Decrypt a remote
   \ "crypt"
 6 / Google Cloud Storage (this is not Google Drive)
   \ "google cloud storage"
 7 / Google Drive
   \ "drive"
 8 / Hubic
   \ "hubic"
 9 / Local Disk
   \ "local"
10 / Microsoft OneDrive
   \ "onedrive"
11 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH)
   \ "swift"
12 / SSH/SFTP Connection
   \ "sftp"
13 / Yandex Disk
   \ "yandex"
Storage> 2
Get AWS credentials from runtime (environment variables or EC2 meta data if no env vars). Only applies if access_key_id and secret_access_key is blank.
Choose a number from below, or type in your own value
 1 / Enter AWS credentials in the next step
   \ "false"
 2 / Get AWS credentials from the environment (env vars or IAM)
   \ "true"
env_auth> 1
AWS Access Key ID - leave blank for anonymous access or runtime credentials.
access_key_id> access_key
AWS Secret Access Key (password) - leave blank for anonymous access or runtime credentials.
secret_access_key> secret_key
Region to connect to.
Choose a number from below, or type in your own value
   / The default endpoint - a good choice if you are unsure.
 1 | US Region, Northern Virginia or Pacific Northwest.
   | Leave location constraint empty.
   \ "us-east-1"
   / US West (Oregon) Region
 2 | Needs location constraint us-west-2.
   \ "us-west-2"
   / US West (Northern California) Region
 3 | Needs location constraint us-west-1.
   \ "us-west-1"
   / EU (Ireland) Region Region
 4 | Needs location constraint EU or eu-west-1.
   \ "eu-west-1"
   / EU (Frankfurt) Region
 5 | Needs location constraint eu-central-1.
   \ "eu-central-1"
   / Asia Pacific (Singapore) Region
 6 | Needs location constraint ap-southeast-1.
   \ "ap-southeast-1"
   / Asia Pacific (Sydney) Region
 7 | Needs location constraint ap-southeast-2.
   \ "ap-southeast-2"
   / Asia Pacific (Tokyo) Region
 8 | Needs location constraint ap-northeast-1.
   \ "ap-northeast-1"
   / Asia Pacific (Seoul)
 9 | Needs location constraint ap-northeast-2.
   \ "ap-northeast-2"
   / Asia Pacific (Mumbai)
10 | Needs location constraint ap-south-1.
   \ "ap-south-1"
   / South America (Sao Paulo) Region
11 | Needs location constraint sa-east-1.
   \ "sa-east-1"
   / If using an S3 clone that only understands v2 signatures
12 | eg Ceph/Dreamhost
   | set this and make sure you set the endpoint.
   \ "other-v2-signature"
   / If using an S3 clone that understands v4 signatures set this
13 | and make sure you set the endpoint.
   \ "other-v4-signature"
region> 1
Endpoint for S3 API.
Leave blank if using AWS to use the default endpoint for the region.
Specify if using an S3 clone such as Ceph.
endpoint>
Location constraint - must be set to match the Region. Used when creating buckets only.
Choose a number from below, or type in your own value
 1 / Empty for US Region, Northern Virginia or Pacific Northwest.
   \ ""
 2 / US West (Oregon) Region.
   \ "us-west-2"
 3 / US West (Northern California) Region.
   \ "us-west-1"
 4 / EU (Ireland) Region.
   \ "eu-west-1"
 5 / EU Region.
   \ "EU"
 6 / Asia Pacific (Singapore) Region.
   \ "ap-southeast-1"
 7 / Asia Pacific (Sydney) Region.
   \ "ap-southeast-2"
 8 / Asia Pacific (Tokyo) Region.
   \ "ap-northeast-1"
 9 / Asia Pacific (Seoul)
   \ "ap-northeast-2"
10 / Asia Pacific (Mumbai)
   \ "ap-south-1"
11 / South America (Sao Paulo) Region.
   \ "sa-east-1"
location_constraint> 1
Canned ACL used when creating buckets and/or storing objects in S3.
For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl
Choose a number from below, or type in your own value
 1 / Owner gets FULL_CONTROL. No one else has access rights (default).
   \ "private"
 2 / Owner gets FULL_CONTROL. The AllUsers group gets READ access.
   \ "public-read"
   / Owner gets FULL_CONTROL. The AllUsers group gets READ and WRITE access.
 3 | Granting this on a bucket is generally not recommended.
   \ "public-read-write"
 4 / Owner gets FULL_CONTROL. The AuthenticatedUsers group gets READ access.
   \ "authenticated-read"
   / Object owner gets FULL_CONTROL. Bucket owner gets READ access.
 5 | If you specify this canned ACL when creating a bucket, Amazon S3 ignores it.
   \ "bucket-owner-read"
   / Both the object owner and the bucket owner get FULL_CONTROL over the object.
 6 | If you specify this canned ACL when creating a bucket, Amazon S3 ignores it.
   \ "bucket-owner-full-control"
acl> private
The server-side encryption algorithm used when storing this object in S3.
Choose a number from below, or type in your own value
 1 / None
   \ ""
 2 / AES256
   \ "AES256"
server_side_encryption>
The storage class to use when storing objects in S3.
Choose a number from below, or type in your own value
 1 / Default
   \ ""
 2 / Standard storage class
   \ "STANDARD"
 3 / Reduced redundancy storage class
   \ "REDUCED_REDUNDANCY"
 4 / Standard Infrequent Access storage class
   \ "STANDARD_IA"
storage_class>
Remote config
--------------------
[remote]
env_auth = false
access_key_id = access_key
secret_access_key = secret_key
region = us-east-1
endpoint =
location_constraint =
acl = private
server_side_encryption =
storage_class =
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y
```

This remote is called `remote` and can now be used like this

See all buckets

    rclone lsd remote:

Make a new bucket

    rclone mkdir remote:bucket

List the contents of a bucket

    rclone ls remote:bucket

Sync `/home/local/directory` to the remote bucket, deleting any excess
files in the bucket.

    rclone sync /home/local/directory remote:bucket

### --fast-list ###

This remote supports `--fast-list` which allows you to use fewer
transactions in exchange for more memory. See the [rclone
docs](/docs/#fast-list) for more details.

### Modified time ###

The modified time is stored as metadata on the object as
`X-Amz-Meta-Mtime` as floating point since the epoch accurate to 1 ns.

### Multipart uploads ###

rclone supports multipart uploads with S3 which means that it can
upload files bigger than 5GB. Note that files uploaded with multipart
upload don't have an MD5SUM.

### Buckets and Regions ###

With Amazon S3 you can list buckets (`rclone lsd`) using any region,
but you can only access the content of a bucket from the region it was
created in.  If you attempt to access a bucket from the wrong region,
you will get an error, `incorrect region, the bucket is not in 'XXX'
region`.

### Authentication ###
There are two ways to supply `rclone` with a set of AWS
credentials. In order of precedence:

 - Directly in the rclone configuration file (as configured by `rclone config`)
   - set `access_key_id` and `secret_access_key`
 - Runtime configuration:
   - set `env_auth` to `true` in the config file
   - Exporting the following environment variables before running `rclone`
     - Access Key ID: `AWS_ACCESS_KEY_ID` or `AWS_ACCESS_KEY`
     - Secret Access Key: `AWS_SECRET_ACCESS_KEY` or `AWS_SECRET_KEY`
   - Running `rclone` on an EC2 instance with an IAM role

If none of these option actually end up providing `rclone` with AWS
credentials then S3 interaction will be non-authenticated (see below).

### S3 Permissions ###

When using the `sync` subcommand of `rclone` the following minimum 
permissions are required to be available on the bucket being written to:

* `ListBucket`
* `DeleteObject`
* `GetObject`
* `PutObject`
* `PutObjectACL`

Example policy:

```
{
    "Version": "2012-10-17",
    "Statement": [
        {
            "Effect": "Allow",
            "Principal": {
                "AWS": "arn:aws:iam::USER_SID:user/USER_NAME"
            },
            "Action": [
                "s3:ListBucket",
                "s3:DeleteObject",
                "s3:GetObject",
                "s3:PutObject",
                "s3:PutObjectAcl"
            ],
            "Resource": [
              "arn:aws:s3:::BUCKET_NAME/*",
              "arn:aws:s3:::BUCKET_NAME"
            ]
        }
    ]
}
```

Notes on above:

1. This is a policy that can be used when creating bucket. It assumes
   that `USER_NAME` has been created.
2. The Resource entry must include both resource ARNs, as one implies 
   the bucket and the other implies the bucket's objects.

For reference, [here's an Ansible script](https://gist.github.com/ebridges/ebfc9042dd7c756cd101cfa807b7ae2b) 
that will generate one or more buckets that will work with `rclone sync`.

### Specific options ###

Here are the command line options specific to this cloud storage
system.

#### --s3-acl=STRING ####

Canned ACL used when creating buckets and/or storing objects in S3.

For more info visit the [canned ACL docs](https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl).

#### --s3-storage-class=STRING ####

Storage class to upload new objects with.

Available options include:

 - STANDARD - default storage class
 - STANDARD_IA - for less frequently accessed data (e.g backups)
 - REDUCED_REDUNDANCY (only for noncritical, reproducible data, has lower redundancy)

### Anonymous access to public buckets ###

If you want to use rclone to access a public bucket, configure with a
blank `access_key_id` and `secret_access_key`.  Eg

```
No remotes found - make a new one
n) New remote
q) Quit config
n/q> n
name> anons3
What type of source is it?
Choose a number from below
 1) amazon cloud drive
 2) b2
 3) drive
 4) dropbox
 5) google cloud storage
 6) swift
 7) hubic
 8) local
 9) onedrive
10) s3
11) yandex
type> 10
Get AWS credentials from runtime (environment variables or EC2 meta data if no env vars). Only applies if access_key_id and secret_access_key is blank.
Choose a number from below, or type in your own value
 * Enter AWS credentials in the next step
 1) false
 * Get AWS credentials from the environment (env vars or IAM)
 2) true
env_auth> 1
AWS Access Key ID - leave blank for anonymous access or runtime credentials.
access_key_id>
AWS Secret Access Key (password) - leave blank for anonymous access or runtime credentials.
secret_access_key>
...
```

Then use it as normal with the name of the public bucket, eg

    rclone lsd anons3:1000genomes

You will be able to list and copy data but not upload it.

### Ceph ###

Ceph is an object storage system which presents an Amazon S3 interface.

To use rclone with ceph, you need to set the following parameters in
the config.

```
access_key_id = Whatever
secret_access_key = Whatever
endpoint = https://ceph.endpoint.goes.here/
region = other-v2-signature
```

Note also that Ceph sometimes puts `/` in the passwords it gives
users.  If you read the secret access key using the command line tools
you will get a JSON blob with the `/` escaped as `\/`.  Make sure you
only write `/` in the secret access key.

Eg the dump from Ceph looks something like this (irrelevant keys
removed).

```
{
    "user_id": "xxx",
    "display_name": "xxxx",
    "keys": [
        {
            "user": "xxx",
            "access_key": "xxxxxx",
            "secret_key": "xxxxxx\/xxxx"
        }
    ],
}
```

Because this is a json dump, it is encoding the `/` as `\/`, so if you
use the secret key as `xxxxxx/xxxx`  it will work fine.

### Minio ###

[Minio](https://minio.io/) is an object storage server built for cloud application developers and devops.

It is very easy to install and provides an S3 compatible server which can be used by rclone.

To use it, install Minio following the instructions [here](https://docs.minio.io/docs/minio-quickstart-guide).

When it configures itself Minio will print something like this

```
Endpoint:  http://192.168.1.106:9000  http://172.23.0.1:9000
AccessKey: USWUXHGYZQYFYFFIT3RE
SecretKey: MOJRH0mkL1IPauahWITSVvyDrQbEEIwljvmxdq03
Region:    us-east-1
SQS ARNs:  arn:minio:sqs:us-east-1:1:redis arn:minio:sqs:us-east-1:2:redis

Browser Access:
   http://192.168.1.106:9000  http://172.23.0.1:9000

Command-line Access: https://docs.minio.io/docs/minio-client-quickstart-guide
   $ mc config host add myminio http://192.168.1.106:9000 USWUXHGYZQYFYFFIT3RE MOJRH0mkL1IPauahWITSVvyDrQbEEIwljvmxdq03

Object API (Amazon S3 compatible):
   Go:         https://docs.minio.io/docs/golang-client-quickstart-guide
   Java:       https://docs.minio.io/docs/java-client-quickstart-guide
   Python:     https://docs.minio.io/docs/python-client-quickstart-guide
   JavaScript: https://docs.minio.io/docs/javascript-client-quickstart-guide
   .NET:       https://docs.minio.io/docs/dotnet-client-quickstart-guide

Drive Capacity: 26 GiB Free, 165 GiB Total
```

These details need to go into `rclone config` like this.  Note that it
is important to put the region in as stated above.

```
env_auth> 1
access_key_id> USWUXHGYZQYFYFFIT3RE
secret_access_key> MOJRH0mkL1IPauahWITSVvyDrQbEEIwljvmxdq03
region> us-east-1
endpoint> http://192.168.1.106:9000
location_constraint>
server_side_encryption>
```

Which makes the config file look like this

```
[minio]
env_auth = false
access_key_id = USWUXHGYZQYFYFFIT3RE
secret_access_key = MOJRH0mkL1IPauahWITSVvyDrQbEEIwljvmxdq03
region = us-east-1
endpoint = http://192.168.1.106:9000
location_constraint =
server_side_encryption =
```

So once set up, for example to copy files into a bucket

```
rclone copy /path/to/files minio:bucket
```