docs: cross link doc pages for related commands

cmd/backend/backend.go

@@ -145,7 +145,7 @@ Run them with
 
 The help below will explain what arguments each command takes.
 
-See [the "rclone backend" command](/commands/rclone_backend/) for more
+See the [backend](/commands/rclone_backend/) command for more
 info on how to pass options and arguments.
 
 These can be run on a running backend using the rc command

cmd/check/check.go

@@ -139,6 +139,10 @@ Checks the files in the source and destination match.  It compares
 sizes and hashes (MD5 or SHA1) and logs a report of files that don't
 match.  It doesn't alter the source or destination.
 
+For the [crypt](/crypt/) remote there is a dedicated command,
+[cryptcheck](/commands/rclone_cryptcheck/), that are able to check
+the checksums of the crypted files.
+
 If you supply the |--size-only| flag, it will only compare the sizes not
 the hashes as well.  Use this for a quick check.
 

cmd/copy/copy.go

@@ -28,13 +28,18 @@ var commandDefinition = &cobra.Command{
 	Long: strings.ReplaceAll(`
 Copy the source to the destination.  Does not transfer files that are
 identical on source and destination, testing by size and modification
-time or MD5SUM.  Doesn't delete files from the destination.
+time or MD5SUM.  Doesn't delete files from the destination. If you
+want to also delete files from destination, to make it match source,
+use the [sync](/commands/rclone_sync/) command instead.
 
 Note that it is always the contents of the directory that is synced,
-not the directory so when source:path is a directory, it's the
+not the directory itself. So when source:path is a directory, it's the
 contents of source:path that are copied, not the directory name and
 contents.
 
+To copy single files, use the [copyto](/commands/rclone_copyto/)
+command instead.
+
 If dest:path doesn't exist, it is created and the source:path contents
 go there.
 

cmd/copyto/copyto.go

@@ -21,8 +21,8 @@ If source:path is a file or directory then it copies it to a file or
 directory named dest:path.
 
 This can be used to upload single files to other than their current
-name.  If the source is a directory then it acts exactly like the copy
+name.  If the source is a directory then it acts exactly like the
-command.
+[copy](/commands/rclone_copy/) command.
 
 So
 

cmd/cryptcheck/cryptcheck.go

@@ -23,9 +23,9 @@ var commandDefinition = &cobra.Command{
 	Use:   "cryptcheck remote:path cryptedremote:path",
 	Short: `Cryptcheck checks the integrity of a crypted remote.`,
 	Long: `
-rclone cryptcheck checks a remote against a crypted remote.  This is
+rclone cryptcheck checks a remote against a [crypted](/crypt/) remote.
-the equivalent of running rclone check, but able to check the
+This is the equivalent of running rclone [check](/commands/rclone_check/),
-checksums of the crypted remote.
+but able to check the checksums of the crypted remote.
 
 For it to work the underlying remote of the cryptedremote must support
 some kind of checksum.

cmd/cryptdecode/cryptdecode.go

@@ -38,7 +38,7 @@ use it like this
 	rclone cryptdecode --reverse encryptedremote: filename1 filename2
 
 Another way to accomplish this is by using the ` + "`rclone backend encode` (or `decode`)" + `command.
-See the documentation on the ` + "`crypt`" + ` overlay for more info.
+See the documentation on the [crypt](/crypt/) overlay for more info.
 `,
 	Run: func(command *cobra.Command, args []string) {
 		cmd.CheckArgs(2, 11, command, args)

cmd/delete/delete.go

@@ -25,16 +25,16 @@ var commandDefinition = &cobra.Command{
 	Short: `Remove the files in path.`,
 	// Warning! "|" will be replaced by backticks below
 	Long: strings.ReplaceAll(`
-Remove the files in path.  Unlike |purge| it obeys include/exclude
+Remove the files in path.  Unlike [purge](/commands/rclone_purge/) it
-filters so can be used to selectively delete files.
+obeys include/exclude filters so can be used to selectively delete files.
 
 |rclone delete| only deletes files but leaves the directory structure
 alone. If you want to delete a directory and all of its contents use
-the |purge| command.
+the [purge](/commands/rclone_purge/) command.
 
 If you supply the |--rmdirs| flag, it will remove all empty directories along with it.
-You can also use the separate command |rmdir| or |rmdirs| to
+You can also use the separate command [rmdir](/commands/rclone_rmdir/) or
-delete empty directories only.
+[rmdirs](/commands/rclone_rmdirs/) to delete empty directories only.
 
 For example, to delete all files bigger than 100 MiB, you may first want to
 check what would be deleted (use either):

cmd/hashsum/hashsum.go

@@ -93,6 +93,9 @@ not supported by the remote, no hash will be returned.  With the
 download flag, the file will be downloaded from the remote and
 hashed locally enabling any hash for any remote.
 
+For the MD5 and SHA1 algorithms there are also dedicated commands,
+[md5sum](/commands/rclone_md5sum/) and [sha1sum](/commands/rclone_sha1sum/).
+
 This command can also hash data received on standard input (stdin),
 by not passing a remote:path, or by passing a hyphen as remote:path
 when there is data to read (if not, the hypen will be treated literaly,

cmd/md5sum/md5sum.go

@@ -28,6 +28,10 @@ not supported by the remote, no hash will be returned.  With the
 download flag, the file will be downloaded from the remote and
 hashed locally enabling MD5 for any remote.
 
+For other algorithms, see the [hashsum](/commands/rclone_hashsum/)
+command. Running ` + "`rclone md5sum remote:path`" + ` is equivalent
+to running ` + "`rclone hashsum MD5 remote:path`" + `.
+
 This command can also hash data received on standard input (stdin),
 by not passing a remote:path, or by passing a hyphen as remote:path
 when there is data to read (if not, the hypen will be treated literaly,

cmd/move/move.go

@@ -33,6 +33,9 @@ Moves the contents of the source directory to the destination
 directory. Rclone will error if the source and destination overlap and
 the remote does not support a server-side directory move operation.
 
+To move single files, use the [moveto](/commands/rclone_moveto/)
+command instead.
+
 If no filters are in use and if possible this will server-side move
 |source:path| into |dest:path|. After this |source:path| will no
 longer exist.
@@ -43,7 +46,8 @@ move will be used, otherwise it will copy it (server-side if possible)
 into |dest:path| then delete the original (if no errors on copy) in
 |source:path|.
 
-If you want to delete empty source directories after move, use the --delete-empty-src-dirs flag.
+If you want to delete empty source directories after move, use the
+|--delete-empty-src-dirs| flag.
 
 See the [--no-traverse](/docs/#no-traverse) option for controlling
 whether rclone lists the destination directory or not.  Supplying this

cmd/moveto/moveto.go

@@ -22,7 +22,7 @@ directory named dest:path.
 
 This can be used to rename files or upload single files to other than
 their existing name.  If the source is a directory then it acts exactly
-like the move command.
+like the [move](/commands/rclone_move/) command.
 
 So
 

cmd/ncdu/ncdu.go

@@ -69,6 +69,10 @@ but is useful as it stands.
 
 Note that it might take some time to delete big files/directories. The
 UI won't respond in the meantime since the deletion is done synchronously.
+
+For a non-interactive listing of the remote, see the
+[tree](/commands/rclone_tree/) command. To just get the total size of
+the remote you can also use the [size](/commands/rclone_size/) command.
 `,
 	Run: func(command *cobra.Command, args []string) {
 		cmd.CheckArgs(1, 1, command, args)

cmd/purge/purge.go

@@ -17,9 +17,10 @@ var commandDefinition = &cobra.Command{
 	Short: `Remove the path and all of its contents.`,
 	Long: `
 Remove the path and all of its contents.  Note that this does not obey
-include/exclude filters - everything will be removed.  Use the ` + "`delete`" + `
+include/exclude filters - everything will be removed.  Use the
-command if you want to selectively delete files. To delete empty directories only,
+[delete](/commands/rclone_delete/) command if you want to selectively
-use command ` + "`rmdir`" + ` or ` + "`rmdirs`" + `.
+delete files. To delete empty directories only, use command
+[rmdir](/commands/rclone_rmdir/) or [rmdirs](/commands/rclone_rmdirs/).
 
 **Important**: Since this can cause data loss, test first with the
 ` + "`--dry-run` or the `--interactive`/`-i`" + ` flag.

cmd/rmdir/rmdir.go

@@ -18,10 +18,10 @@ var commandDefinition = &cobra.Command{
 	Long: `
 This removes empty directory given by path. Will not remove the path if it
 has any objects in it, not even empty subdirectories. Use
-command ` + "`rmdirs`" + ` (or ` + "`delete`" + ` with option ` + "`--rmdirs`" + `)
+command [rmdirs](/commands/rclone_rmdirs/) (or [delete](/commands/rclone_delete/)
-to do that.
+with option ` + "`--rmdirs`" + `) to do that.
 
-To delete a path and any objects in it, use ` + "`purge`" + ` command.
+To delete a path and any objects in it, use [purge](/commands/rclone_purge/) command.
 `,
 	Run: func(command *cobra.Command, args []string) {
 		cmd.CheckArgs(1, 1, command, args)

cmd/rmdirs/rmdirs.go

@@ -26,15 +26,16 @@ that only contain empty directories), that it finds under the path.
 The root path itself will also be removed if it is empty, unless
 you supply the ` + "`--leave-root`" + ` flag.
 
-Use command ` + "`rmdir`" + ` to delete just the empty directory
+Use command [rmdir](/commands/rclone_rmdir/) to delete just the empty
-given by path, not recurse.
+directory given by path, not recurse.
 
 This is useful for tidying up remotes that rclone has left a lot of
-empty directories in. For example the ` + "`delete`" + ` command will
+empty directories in. For example the [delete](/commands/rclone_delete/)
-delete files but leave the directory structure (unless used with
+command will delete files but leave the directory structure (unless
-option ` + "`--rmdirs`" + `).
+used with option ` + "`--rmdirs`" + `).
 
-To delete a path and any objects in it, use ` + "`purge`" + ` command.
+To delete a path and any objects in it, use [purge](/commands/rclone_purge/)
+command.
 `,
 	Run: func(command *cobra.Command, args []string) {
 		cmd.CheckArgs(1, 1, command, args)

cmd/serve/webdav/webdav.go

@@ -59,9 +59,8 @@ based on the ModTime and Size of the object.
 
 If this flag is set to "auto" then rclone will choose the first
 supported hash on the backend or you can use a named hash such as
-"MD5" or "SHA-1".
+"MD5" or "SHA-1". Use the [hashsum](/commands/rclone_hashsum/) command
-
+to see the full list.
-Use "rclone hashsum" to see the full list.
 
 ` + httplib.Help + vfs.Help + proxy.Help,
 	RunE: func(command *cobra.Command, args []string) error {

cmd/sha1sum/sha1sum.go

@@ -28,6 +28,10 @@ not supported by the remote, no hash will be returned.  With the
 download flag, the file will be downloaded from the remote and
 hashed locally enabling SHA-1 for any remote.
 
+For other algorithms, see the [hashsum](/commands/rclone_hashsum/)
+command. Running ` + "`rclone sha1sum remote:path`" + ` is equivalent
+to running ` + "`rclone hashsum SHA1 remote:path`" + `.
+
 This command can also hash data received on standard input (stdin),
 by not passing a remote:path, or by passing a hyphen as remote:path
 when there is data to read (if not, the hypen will be treated literaly,

cmd/sync/sync.go

@@ -28,7 +28,9 @@ Sync the source to the destination, changing the destination
 only.  Doesn't transfer files that are identical on source and
 destination, testing by size and modification time or MD5SUM.
 Destination is updated to match source, including deleting files
-if necessary (except duplicate objects, see below).
+if necessary (except duplicate objects, see below). If you don't
+want to delete files from destination, use the
+[copy](/commands/rclone_copy/) command instead.
 
 **Important**: Since this can cause data loss, test first with the
 ` + "`--dry-run` or the `--interactive`/`-i`" + ` flag.
@@ -42,7 +44,7 @@ those providers that support it) are also not yet handled.
 It is always the contents of the directory that is synced, not the
 directory itself. So when source:path is a directory, it's the contents of
 source:path that are copied, not the directory name and contents.  See
-extended explanation in the ` + "`" + `copy` + "`" + ` command above if unsure.
+extended explanation in the [copy](/commands/rclone_copy/) command if unsure.
 
 If dest:path doesn't exist, it is created and the source:path contents
 go there.

cmd/tree/tree.go

@@ -84,11 +84,15 @@ For example
     1 directories, 5 files
 
 You can use any of the filtering options with the tree command (e.g.
---include and --exclude).  You can also use --fast-list.
+` + "`--include` and `--exclude`" + `.  You can also use ` + "`--fast-list`" + `.
 
 The tree command has many options for controlling the listing which
-are compatible with the tree command.  Note that not all of them have
+are compatible with the tree command, for example you can include file
+sizes with ` + "`--size`" + `.  Note that not all of them have
 short options as they conflict with rclone's short options.
+
+For a more interactive navigation of the remote see the
+[ncdu](/commands/rclone_ncdu/) command.
 `,
 	RunE: func(command *cobra.Command, args []string) error {
 		cmd.CheckArgs(1, 1, command, args)

docs/content/rc.md

@@ -8,10 +8,10 @@ description: "Remote controlling rclone with its API"
 If rclone is run with the `--rc` flag then it starts an HTTP server
 which can be used to remote control rclone using its API.
 
-You can either use the [rclone rc](#api-rc) command to access the API
+You can either use the [rc](#api-rc) command to access the API
 or [use HTTP directly](#api-http).
 
-If you just want to run a remote control then see the [rcd command](/commands/rclone_rcd/).
+If you just want to run a remote control then see the [rcd](/commands/rclone_rcd/) command.
 
 ## Supported parameters
 
@@ -544,8 +544,7 @@ This takes the following parameters:
     - state - state to restart with - used with continue
     - result - result to restart with - used with continue
 
-
+See the [config create](/commands/rclone_config_create/) command for more information on the above.
-See the [config create command](/commands/rclone_config_create/) command for more information on the above.
 
 **Authentication is required for this call.**
 
@@ -555,7 +554,7 @@ Parameters:
 
 - name - name of remote to delete
 
-See the [config delete command](/commands/rclone_config_delete/) command for more information on the above.
+See the [config delete](/commands/rclone_config_delete/) command for more information on the above.
 
 **Authentication is required for this call.**
 
@@ -566,7 +565,7 @@ Returns a JSON object:
 
 Where keys are remote names and values are the config parameters.
 
-See the [config dump command](/commands/rclone_config_dump/) command for more information on the above.
+See the [config dump](/commands/rclone_config_dump/) command for more information on the above.
 
 **Authentication is required for this call.**
 
@@ -576,7 +575,7 @@ Parameters:
 
 - name - name of remote to get
 
-See the [config dump command](/commands/rclone_config_dump/) command for more information on the above.
+See the [config dump](/commands/rclone_config_dump/) command for more information on the above.
 
 **Authentication is required for this call.**
 
@@ -585,7 +584,7 @@ See the [config dump command](/commands/rclone_config_dump/) command for more in
 Returns
 - remotes - array of remote names
 
-See the [listremotes command](/commands/rclone_listremotes/) command for more information on the above.
+See the [listremotes](/commands/rclone_listremotes/) command for more information on the above.
 
 **Authentication is required for this call.**
 
@@ -596,8 +595,7 @@ This takes the following parameters:
 - name - name of remote
 - parameters - a map of \{ "key": "value" \} pairs
 
-
+See the [config password](/commands/rclone_config_password/) command for more information on the above.
-See the [config password command](/commands/rclone_config_password/) command for more information on the above.
 
 **Authentication is required for this call.**
 
@@ -606,7 +604,7 @@ See the [config password command](/commands/rclone_config_password/) command for
 Returns a JSON object:
 - providers - array of objects
 
-See the [config providers command](/commands/rclone_config_providers/) command for more information on the above.
+See the [config providers](/commands/rclone_config_providers/) command for more information on the above.
 
 **Authentication is required for this call.**
 
@@ -625,8 +623,7 @@ This takes the following parameters:
     - state - state to restart with - used with continue
     - result - result to restart with - used with continue
 
-
+See the [config update](/commands/rclone_config_update/) command for more information on the above.
-See the [config update command](/commands/rclone_config_update/) command for more information on the above.
 
 **Authentication is required for this call.**
 
@@ -1072,7 +1069,7 @@ This takes the following parameters:
 
 The result is as returned from rclone about --json
 
-See the [about command](/commands/rclone_size/) command for more information on the above.
+See the [about](/commands/rclone_size/) command for more information on the above.
 
 **Authentication is required for this call.**
 
@@ -1082,7 +1079,7 @@ This takes the following parameters:
 
 - fs - a remote name string e.g. "drive:"
 
-See the [cleanup command](/commands/rclone_cleanup/) command for more information on the above.
+See the [cleanup](/commands/rclone_cleanup/) command for more information on the above.
 
 **Authentication is required for this call.**
 
@@ -1104,8 +1101,9 @@ This takes the following parameters:
 - fs - a remote name string e.g. "drive:"
 - remote - a path within that remote e.g. "dir"
 - url - string, URL to read from
- - autoFilename - boolean, set to true to retrieve destination file name from url
+- autoFilename - boolean, set to true to retrieve destination file name from url
-See the [copyurl command](/commands/rclone_copyurl/) command for more information on the above.
+
+See the [copyurl](/commands/rclone_copyurl/) command for more information on the above.
 
 **Authentication is required for this call.**
 
@@ -1115,7 +1113,7 @@ This takes the following parameters:
 
 - fs - a remote name string e.g. "drive:"
 
-See the [delete command](/commands/rclone_delete/) command for more information on the above.
+See the [delete](/commands/rclone_delete/) command for more information on the above.
 
 **Authentication is required for this call.**
 
@@ -1126,7 +1124,7 @@ This takes the following parameters:
 - fs - a remote name string e.g. "drive:"
 - remote - a path within that remote e.g. "dir"
 
-See the [deletefile command](/commands/rclone_deletefile/) command for more information on the above.
+See the [deletefile](/commands/rclone_deletefile/) command for more information on the above.
 
 **Authentication is required for this call.**
 
@@ -1209,7 +1207,7 @@ Returns:
 - list
     - This is an array of objects as described in the lsjson command
 
-See the [lsjson command](/commands/rclone_lsjson/) for more information on the above and examples.
+See the [lsjson](/commands/rclone_lsjson/) for more information on the above and examples.
 
 **Authentication is required for this call.**
 
@@ -1220,7 +1218,7 @@ This takes the following parameters:
 - fs - a remote name string e.g. "drive:"
 - remote - a path within that remote e.g. "dir"
 
-See the [mkdir command](/commands/rclone_mkdir/) command for more information on the above.
+See the [mkdir](/commands/rclone_mkdir/) command for more information on the above.
 
 **Authentication is required for this call.**
 
@@ -1248,7 +1246,7 @@ Returns:
 
 - url - URL of the resource
 
-See the [link command](/commands/rclone_link/) command for more information on the above.
+See the [link](/commands/rclone_link/) command for more information on the above.
 
 **Authentication is required for this call.**
 
@@ -1259,7 +1257,7 @@ This takes the following parameters:
 - fs - a remote name string e.g. "drive:"
 - remote - a path within that remote e.g. "dir"
 
-See the [purge command](/commands/rclone_purge/) command for more information on the above.
+See the [purge](/commands/rclone_purge/) command for more information on the above.
 
 **Authentication is required for this call.**
 
@@ -1270,7 +1268,7 @@ This takes the following parameters:
 - fs - a remote name string e.g. "drive:"
 - remote - a path within that remote e.g. "dir"
 
-See the [rmdir command](/commands/rclone_rmdir/) command for more information on the above.
+See the [rmdir](/commands/rclone_rmdir/) command for more information on the above.
 
 **Authentication is required for this call.**
 
@@ -1281,7 +1279,8 @@ This takes the following parameters:
 - fs - a remote name string e.g. "drive:"
 - remote - a path within that remote e.g. "dir"
 - leaveRoot - boolean, set to true not to delete the root
-See the [rmdirs command](/commands/rclone_rmdirs/) command for more information on the above.
+
+See the [rmdirs](/commands/rclone_rmdirs/) command for more information on the above.
 
 **Authentication is required for this call.**
 
@@ -1297,7 +1296,7 @@ Returns:
 - bytes - number of bytes in those files
 - sizeless - number of files with unknown size, included in count but not accounted for in bytes
 
-See the [size command](/commands/rclone_size/) command for more information on the above.
+See the [size](/commands/rclone_size/) command for more information on the above.
 
 **Authentication is required for this call.**
 
@@ -1317,7 +1316,7 @@ The result is
 Note that if you are only interested in files then it is much more
 efficient to set the filesOnly flag in the options.
 
-See the [lsjson command](/commands/rclone_lsjson/) for more information on the above and examples.
+See the [lsjson](/commands/rclone_lsjson/) for more information on the above and examples.
 
 **Authentication is required for this call.**
 
@@ -1328,7 +1327,8 @@ This takes the following parameters:
 - fs - a remote name string e.g. "drive:"
 - remote - a path within that remote e.g. "dir"
 - each part in body represents a file to be uploaded
-See the [uploadfile command](/commands/rclone_uploadfile/) command for more information on the above.
+
+See the [uploadfile](/commands/rclone_uploadfile/) command for more information on the above.
 
 **Authentication is required for this call.**
 
@@ -1542,8 +1542,7 @@ This takes the following parameters:
 - dstFs - a remote name string e.g. "drive:dst" for the destination
 - createEmptySrcDirs - create empty src directories on destination if set
 
-
+See the [copy](/commands/rclone_copy/) command for more information on the above.
-See the [copy command](/commands/rclone_copy/) command for more information on the above.
 
 **Authentication is required for this call.**
 
@@ -1556,8 +1555,7 @@ This takes the following parameters:
 - createEmptySrcDirs - create empty src directories on destination if set
 - deleteEmptySrcDirs - delete empty src directories if set
 
-
+See the [move](/commands/rclone_move/) command for more information on the above.
-See the [move command](/commands/rclone_move/) command for more information on the above.
 
 **Authentication is required for this call.**
 
@@ -1570,7 +1568,7 @@ This takes the following parameters:
 - createEmptySrcDirs - create empty src directories on destination if set
 
 
-See the [sync command](/commands/rclone_sync/) command for more information on the above.
+See the [sync](/commands/rclone_sync/) command for more information on the above.
 
 **Authentication is required for this call.**
 

fs/config/rc.go

@@ -20,7 +20,7 @@ Returns a JSON object:
 
 Where keys are remote names and values are the config parameters.
 
-See the [config dump command](/commands/rclone_config_dump/) command for more information on the above.
+See the [config dump](/commands/rclone_config_dump/) command for more information on the above.
 `,
 	})
 }
@@ -41,7 +41,7 @@ Parameters:
 
 - name - name of remote to get
 
-See the [config dump command](/commands/rclone_config_dump/) command for more information on the above.
+See the [config dump](/commands/rclone_config_dump/) command for more information on the above.
 `,
 	})
 }
@@ -65,7 +65,7 @@ func init() {
 Returns
 - remotes - array of remote names
 
-See the [listremotes command](/commands/rclone_listremotes/) command for more information on the above.
+See the [listremotes](/commands/rclone_listremotes/) command for more information on the above.
 `,
 	})
 }
@@ -89,7 +89,7 @@ func init() {
 Returns a JSON object:
 - providers - array of objects
 
-See the [config providers command](/commands/rclone_config_providers/) command for more information on the above.
+See the [config providers](/commands/rclone_config_providers/) command for more information on the above.
 `,
 	})
 }
@@ -133,7 +133,7 @@ func init() {
 - parameters - a map of \{ "key": "value" \} pairs
 ` + extraHelp + `
 
-See the [config ` + name + ` command](/commands/rclone_config_` + name + `/) command for more information on the above.`,
+See the [config ` + name + `](/commands/rclone_config_` + name + `/) command for more information on the above.`,
 		})
 	}
 }
@@ -203,7 +203,7 @@ Parameters:
 
 - name - name of remote to delete
 
-See the [config delete command](/commands/rclone_config_delete/) command for more information on the above.
+See the [config delete](/commands/rclone_config_delete/) command for more information on the above.
 `,
 	})
 }

fs/operations/rc.go

@@ -41,7 +41,7 @@ Returns:
 - list
     - This is an array of objects as described in the lsjson command
 
-See the [lsjson command](/commands/rclone_lsjson/) for more information on the above and examples.
+See the [lsjson](/commands/rclone_lsjson/) command for more information on the above and examples.
 `,
 	})
 }
@@ -90,7 +90,7 @@ The result is
 Note that if you are only interested in files then it is much more
 efficient to set the filesOnly flag in the options.
 
-See the [lsjson command](/commands/rclone_lsjson/) for more information on the above and examples.
+See the [lsjson](/commands/rclone_lsjson/) command for more information on the above and examples.
 `,
 	})
 }
@@ -127,7 +127,7 @@ func init() {
 
 The result is as returned from rclone about --json
 
-See the [about command](/commands/rclone_size/) command for more information on the above.
+See the [about](/commands/rclone_about/) command for more information on the above.
 `,
 	})
 }
@@ -202,11 +202,11 @@ func init() {
 		{name: "mkdir", title: "Make a destination directory or container"},
 		{name: "rmdir", title: "Remove an empty directory or container"},
 		{name: "purge", title: "Remove a directory or container and all of its contents"},
-		{name: "rmdirs", title: "Remove all the empty directories in the path", help: "- leaveRoot - boolean, set to true not to delete the root"},
+		{name: "rmdirs", title: "Remove all the empty directories in the path", help: "- leaveRoot - boolean, set to true not to delete the root\n"},
 		{name: "delete", title: "Remove files in the path", noRemote: true},
 		{name: "deletefile", title: "Remove the single file pointed to"},
-		{name: "copyurl", title: "Copy the URL to the object", help: "- url - string, URL to read from\n - autoFilename - boolean, set to true to retrieve destination file name from url"},
+		{name: "copyurl", title: "Copy the URL to the object", help: "- url - string, URL to read from\n - autoFilename - boolean, set to true to retrieve destination file name from url\n"},
-		{name: "uploadfile", title: "Upload file using multiform/form-data", help: "- each part in body represents a file to be uploaded", needsRequest: true},
+		{name: "uploadfile", title: "Upload file using multiform/form-data", help: "- each part in body represents a file to be uploaded\n", needsRequest: true},
 		{name: "cleanup", title: "Remove trashed files in the remote or path", noRemote: true},
 	} {
 		op := op
@@ -226,7 +226,7 @@ func init() {
 
 - fs - a remote name string e.g. "drive:"
 ` + remote + op.help + `
-See the [` + op.name + ` command](/commands/rclone_` + op.name + `/) command for more information on the above.
+See the [` + op.name + `](/commands/rclone_` + op.name + `/) command for more information on the above.
 `,
 		})
 	}
@@ -334,7 +334,7 @@ Returns:
 - count - number of files
 - bytes - number of bytes in those files
 
-See the [size command](/commands/rclone_size/) command for more information on the above.
+See the [size](/commands/rclone_size/) command for more information on the above.
 `,
 	})
 }
@@ -373,7 +373,7 @@ Returns:
 
 - url - URL of the resource
 
-See the [link command](/commands/rclone_link/) command for more information on the above.
+See the [link](/commands/rclone_link/) command for more information on the above.
 `,
 	})
 }

fs/sync/rc.go

@@ -27,7 +27,7 @@ func init() {
 - createEmptySrcDirs - create empty src directories on destination if set
 ` + moveHelp + `
 
-See the [` + name + ` command](/commands/rclone_` + name + `/) command for more information on the above.`,
+See the [` + name + `](/commands/rclone_` + name + `/) command for more information on the above.`,
 		})
 	}
 }