Before this change, writing files to an `nfsmount` via Finder on macOS would
cause critical errors, rendering `nfsmount` effectively unusable on macOS. This
change fixes the issue so that writes via Finder should be possible.
The issue was primarily caused by the handler's HandleLimit being set to -1. -1 is
the correct default for a NullAuthHandler, but not for a CachingHandler, which
interprets -1 not as "no limit" but as "no cache".
This change sets a high default of 1000000, and gives the user control over it
with a new --nfs-cache-handle-limit flag (available in both `serve nfs` and
`nfsmount`. A minimum of 5 is enforced, as any lower than this will be
insufficient to support directory listing.
Before this change it wasn't possible to see where transfers were
going from and to in core/stats and core/transferred.
When use in rclone mount in particular this made interpreting the
stats very hard.
* serve restic: return internal error if listing failed
If listing a remote failed, then rclone returned http status "not
found". This has become a problem since restic 0.16.0 which ignores "not
found"-errors while listing a directory.
Just return internal server error, if something unexpected happens while
listing a directory.
* serve restic: fix error handling if getting a file fails
If the call to `newObject` in `serveObject` fails, then rclone always
returned a "not found" error. This prevents restic from distinguishing
permanent "not found" errors from everything else.
Thus, only return "not found" if the object is not found and an internal
server error otherwise.
This updates the direct dependencies.
The latest github.com/willscott/go-nfs has changed the interface
slightly so this implements a dummy InvalidateHandle method in order
to satisfy it.
Before this change, listing a subdirectory gave errors like this:
Entry doesn't belong in directory "" (contains subdir) - ignoring
It also did full recursive listings when it didn't need to.
This was caused by the code using the underlying Fs to do recursive
listings on bucket based backends.
Using both the VFS and the underlying Fs is a mistake so this patch
removes the code which uses the underlying Fs and just uses the VFS.
Fixes#7500
Before this change overwriting an existing file with a 0 length file
didn't update the file size.
This change corrects the issue and makes sure the file is truncated
properly.
This was discovered by the full integration tests.
Before this change serve s3 would return NoSuchKey errors when a non
existent prefix was listed.
This change fixes it to return an empty list like AWS does.
This was discovered by the full integration tests.
- Changes
- Rename `--s3-authkey` to `--auth-key` to get it out of the s3 backend namespace
- Enable `Content-MD5` integrity checks
- Remove locking after code audit
- Documentation
- Factor out documentation into seperate file
- Add Quickstart to docs
- Add Bugs section to docs
- Add experimental tag to docs
- Add rclone provider to s3 backend docs
- Fixes
- Correct quirks in s3 backend
- Change fmt.Printlns into fs.Logs
- Make metadata storage per backend not global
- Log on startup if anonymous access is enabled
- Coding style fixes
- rename fs to vfs to save confusion with the rest of rclone code
- rename db to b for *s3Backend
Fixes#7062
- add context to log and fallthrough to error log level
- test: use rclone random lib to generate random strings
- calculate hash from vfs cache if file is uploading
- add server started log with server url
- remove md5 hasher
Before this change, if a hardlink command was issued, rclone would
just ignore it and not return an error.
This changes any unknown operations (including hardlink) to return an
unsupported error.
Summary:
Adding a new command to serve any remote over NFS. This is only useful for new macOS versions where FUSE mounts are not available.
* Added willscot/go-nfs dependency and updated go.mod and go.sum
Test Plan:
```
go run rclone.go serve nfs --http-url https://beta.rclone.org :http:
```
Test that it is serving correctly by mounting the NFS directory.
```
mkdir nfs-test
mount -oport=58654,mountport=58654 localhost: nfs-test
```
Then we can list the mounted directory to see it is working.
```
ls nfs-test
```
If the server returns the MIME type as application/octet-stream we
assume it doesn't really know what the MIME type. This patch tries
matching the MIME type from the file extension instead in this case.
This enables the use of servers (like OneDrive for Business) which
don't allow the setting of MIME types on upload and have a poor
selection of mime types.
Fixes#7259
In this commit we introduced a race condition when using the auth
proxy.
94a320f23c serve ftp: update to goftp.io/server v2.0.1
This was due to the re-organisation of the upstream library which made
the driver be a singleton rather than per session.
This means that when using the auth proxy we need to keep track of
which VFS to use by based on which FTP user is connected.
This also adjusts the locking so that the methods will run
concurrently.
Before this change uploading files with rclone to:
rclone serve sftp --vfs-cache-mode full
Would return the error:
command "md5sum XXX" failed with error: unexpected non file
This patch detects that the file is still in the VFS cache and reads
the MD5SUM from there rather from the remote.
Fixes#7241
This adds an additional parameter to the creation of each flag. This
specifies one or more flag groups. This **must** be set for global
flags and **must not** be set for local flags.
This causes flags.md to be built with sections to aid comprehension
and it causes the documentation pages for each command (and the
`--help`) to be built showing the flags groups as specified in the
`groups` annotation on the command.
See: https://forum.rclone.org/t/make-docs-for-mortals-not-only-rclone-gurus/39476/
This change addresses two issues with commands that re-used
flags from common packages:
1) cobra.Command definitions did not include the command specific
prefix in doc strings.
2) Command specific flag prefixes were added after generating
command doc strings.
Before this change only serve http was Shutting down its server which
was causing other servers such as serve restic to leave behind their
unix sockets.
This change moves the finalisation to lib/http so all servers have it
and removes it from serve http.
Fixes#6648
Before this change, we started the http listener even if --stdio was
supplied.
This also moves the log message so the user won't see the serving via
HTTP message unless they are really using that.
Fixes#6646
In the lib/http refactor
52443c2444 restic: refactor to use lib/http
We forgot to serve the data and wait for the server to finish. This is
not tested in the unit tests as it is part of the command line
handler.
Fixes#6644Fixes#6647
The webdav library was confused by the Path manipulation done by
lib/http when stripping the prefix.
This patch adds the prefix back before calling it.
Fixes#6650
- add support for unix sockets (which skip the auth).
- add support for multiple listeners
- collapse unnecessary internal structure of lib/http so it can all be
imported together
- moves files in sub directories of lib/http into the main lib/http
directory and reworks the code that uses them.
See: https://forum.rclone.org/t/wip-rc-rcd-over-unix-socket/33619Fixes: #6605
Before this change if we copied files of unknown size, then they lost
their metadata.
This was particularly noticeable using --s3-decompress.
This change adds metadata to Rcat and RcatSized and changes Copy to
pass the metadata in when it calls Rcat for an unknown sized input.
Fixes#6546
The current default AnnounceInterval is too short, causing the
multicast domain to be flooded with NOTIFY announcements,
which may prevent other dlna devices from sleeping.
This change allows users to set the announcement interval,
and it's default value also increased to 12 minutes.
Even within the interval, rclone can still passively respond to
M-SEARCH requests from other devices.
Verify the http service listening address and the SSDP server
announcement address to prevent accidental listening of IPv6 addresses
that do not support dlna yet and may be globally accessible.
Unlistened addresses on the interface will also be filtered out of the
SSDP announcement to avoid misleading other services in the multicast domain.
Changes in github.com/anacrolix/dms changed upnp.ServiceURN to include a
namespace identifier. This identifier was previously hardcoded, but is
now parsed out of the URN. The old SOAP action header parsing logic was
duplicated in rclone and did not handle this field. Resulting responses
included a URN with an empty namespace identifier, breaking clients.
Before this change, rclone serve sftp operating with a new rclone
after the md5sum/sha1sum detection was reworked to just run a plain
`md5sum`/`sha1sum` command in
3ea82032e7 sftp: support md5/sha1 with rsync.net #3254
Failed to signal to the remote that md5sum/sha1sum wasn't supported as
in
71e172a139 serve/sftp: support empty "md5sum" and "sha1sum" commands
We unconditionally return good hashes even if the remote being served
doesn't support the hash type in question.
This fix checks the hash type is supported and returns an error
MD5 hash not supported
When the backend is first contacted this will cause the sftp backend
to detect that the hash type isn't available.
Unfortunately this may have cached the wrong state so editing or
remaking the config may be necessary to fix it.
strings.ReplaceAll(s, old, new) is a wrapper function for
strings.Replace(s, old, new, -1). But strings.ReplaceAll is more
readable and removes the hardcoded -1.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
In this commit
f4c40bf79d mount: add --devname to set the device name sent to FUSE for mount display
The --devname parameter was added. However it was soon noticed that
attempting to mount via the rc gave this error:
mount helper error: fusermount: unknown option 'fsname'
mount FAILED: fusermount: exit status 1
This was because the DeviceName (and VolumeName) parameter was never
being initialised when the mount was called via the rc.
The fix for this was to refactor the rc interface so it called the
same Mount method as the command line mount which initialised the
DeviceName and VolumeName parameters properly.
This also fixes the cmd/mount tests which were breaking in the same
way but since they aren't normally run on the CI we didn't notice.
Fixes#6044
The directory created by `T.TempDir` is automatically removed when the
test and all its subtests complete.
Reference: https://pkg.go.dev/testing#T.TempDir
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
This is possible now that we no longer support go1.12 and brings
rclone into line with standard practices in the Go world.
This also removes errors.New and errors.Errorf from lib/errors and
prefers the stdlib errors package over lib/errors.
