Nick Craig-Wood
8a11da4e14
mount: Make fsync be a no-op for direectories too #1045
2017-02-02 21:31:41 +00:00
Nick Craig-Wood
37fe6d56e5
mount: fix docs for umount flags - fixes #1036
2017-01-30 18:17:16 +00:00
Nick Craig-Wood
29c6e22024
mount: Make fsync be a no-op rather than returning an error - fixes #1045
2017-01-29 11:29:42 +00:00
Nick Craig-Wood
a6b4065e13
mount: fix retry on network failure when reading off crypt - fixes #1042
2017-01-17 16:32:04 +00:00
T.C. Ferguson
d4c923a5cc
Add obscure command for generating encrypted passwords for rclone's config
2017-01-10 13:18:09 +00:00
Nick Craig-Wood
35a6436983
mount: implement proper directory handling (mkdir, rmdir)
...
Before this change mount only simulated rmdir & mkdir, now it actually
runs mkdir & rmdir on the underlying remote, using the new parmaeters
to fs.Mkdir and fs.Rmdir.
Fixes #956
2017-01-06 11:24:22 +00:00
Nick Craig-Wood
f73ee5eade
Make all config file variables be settable in the environment
...
These are set in the form RCLONE_CONFIG_remote_option where remote is
the uppercased remote name and option is the uppercased config file
option name. Note that RCLONE_CONFIG_remote_TYPE must be set if
defining a new remote.
Fixes #616
2017-01-03 22:42:47 +00:00
Nick Craig-Wood
0d75d2585f
Allow all options to be set from environment variables
...
The option names are munged changing - to _ making upper case and
prepending RCLONE_. The values are as parsed by pflag.
2017-01-03 22:42:47 +00:00
Lukas Loesche
5894c02a34
Typo: the the -> the in docs and comments
2017-01-03 20:48:26 +00:00
Nick Craig-Wood
43c530922a
Restore ability for any command to show stats by adding --stats flag
...
Make default for `mount` command not to show stats - this can be
re-enabled by adding a `--stats` parameter.
2016-12-15 17:40:17 +00:00
Nick Craig-Wood
dd60f088ed
mount: retry reads on error #873
2016-12-15 17:16:55 +00:00
Nick Craig-Wood
0117aeafbf
mount: this removes the async buffering as it was killing seek performance
2016-12-15 17:08:52 +00:00
Nick Craig-Wood
13b705e227
mount: report the modification times for directories from the remote #940 #950
...
This stops the modification times for directories just being the
current time and reads them from the remote instead. This doesn't
take any extra transactions.
2016-12-14 15:26:04 +00:00
Nick Craig-Wood
c24da0b886
fuse: add stats printing and note which files are transferring
2016-12-04 16:59:46 +00:00
Nick Craig-Wood
be4fd51289
fuse: Add bandwidth accounting and buffering
...
This fixes rclone mount ignoring bwlimit and increases buffering which
should speed up transfers greatly.
Fixes #796
Fixes #690
2016-12-04 16:57:47 +00:00
Nick Craig-Wood
2cbdb95ce5
Only show transfer stats on commands which transfer stuff - fixes #849
2016-12-04 16:52:24 +00:00
Nick Craig-Wood
c265f451f2
Implement moveto and copyto commands for choosing a destination name on copy/move
...
Fixes #227
Fixes #476
2016-12-03 23:43:52 +00:00
Nick Craig-Wood
2058652fa4
Allow overlapping remotes in move when DirMove is supported
2016-12-03 09:08:40 +00:00
Nick Craig-Wood
5e35aeca9e
Regularize the command definition names
2016-12-03 09:08:40 +00:00
Nick Craig-Wood
7929b6e756
fuse: support R/W files only if truncate is set.
...
Any reads on the file handle will return an error. This is to support
windows/samba writes.
2016-11-28 17:56:54 +00:00
Scott McGillivray
f9df545e3c
add --stats-unit option and improve alignment for --stats output
2016-11-28 12:18:30 +00:00
Scott McGillivray
5e62ede8d0
make the parameter format for --stats flag more obvious
2016-11-27 18:57:23 +00:00
Nick Craig-Wood
8aae166a5b
Add missing rmdirs command
2016-11-27 18:36:13 +00:00
Nick Craig-Wood
f3365dd251
Make rclone rmdirs command to delete empty directories - fixes #831
2016-11-27 11:49:31 +00:00
Nick Craig-Wood
aaa1370a36
Add directory parameter to Rmdir and Mkdir #100 #831
...
This will enable rclone to manage directories properly in the future.
2016-11-26 12:02:53 +00:00
Nick Craig-Wood
c41b67ea08
mount: Implement statfs interface so df works - fixes #894
...
The data returned is not related to the files on the remote, but
apparently samba needs it.
2016-11-20 22:54:03 +00:00
Nick Craig-Wood
0b562bcabc
mount: Note that write is now supported on ACD
2016-11-19 10:54:37 +00:00
Stefan Breunig
bf243f30d3
report number of blocks in fuse
2016-11-12 14:10:36 +01:00
Nick Craig-Wood
64b5a76bec
mount: detect and deal with seeking beyond end of file - fixes #828
2016-11-05 09:59:36 +00:00
Nick Craig-Wood
7cfb1bdc70
fuse: tests: create the directory before starting tests
2016-11-05 09:57:45 +00:00
Nick Craig-Wood
062616e4dd
mount: update code comments
2016-10-30 17:46:00 +00:00
Nick Craig-Wood
87107413f5
fuse: add missing locking on filehandle read #823 #802
2016-10-27 09:57:52 +01:00
Nick Craig-Wood
77b975d16f
Note Amazon Drive doesn't support uploads via FUSE yet
2016-10-23 21:46:48 +01:00
Nick Craig-Wood
c464cc6376
mount: fix alignment of 64 bit counter on ARM #813
2016-10-23 17:36:35 +01:00
Nick Craig-Wood
93e84403bb
Remove io.SeekStart and replace with 0 as it is go 1.7 only
2016-10-22 12:07:51 +01:00
Nick Craig-Wood
eba0a3633b
crypt: speed up repeated seeking - fixes #804
2016-10-21 10:03:16 +01:00
Nick Craig-Wood
de73063977
Fix output of crypt objects in logs
2016-10-20 17:46:51 +01:00
Nick Craig-Wood
a02edb9e69
Add rclone mount --dir-cache-time to control caching of directory entries - fixes #680
2016-10-18 17:23:57 +01:00
Nick Craig-Wood
d8d11023d3
mount: update internal position on seek - fixes #774
2016-10-17 20:20:07 +01:00
Nick Craig-Wood
ace1e21894
Add listremotes command - fixes #558
2016-10-08 14:24:37 +01:00
Nick Craig-Wood
f45b3c87bf
mount: add --no-seek flag to disable seeking
2016-10-06 13:37:45 +01:00
Nick Craig-Wood
de80a540a7
mount: attempt to speed up
2016-10-05 21:04:57 +01:00
Nick Craig-Wood
392a86f585
mount: Fix read flushing - fixes #638
2016-10-05 21:03:56 +01:00
Nick Craig-Wood
265f5b77a7
mount: make files opened for read seekable - fixes #707
2016-10-05 21:03:56 +01:00
Nick Craig-Wood
bfe6f299d0
Revise list of OSes which can redirect stderr - fixes #698
2016-09-19 17:13:41 +01:00
Nick Craig-Wood
4001e21624
Make sure high level retries show with -q - fixes #648
...
Also update the exit code documentation describing that.
2016-09-12 17:50:19 +01:00
Nick Craig-Wood
bbf819e2d1
Move versioncheck so it happens earlier in the compile process.
2016-09-12 17:50:19 +01:00
Nick Craig-Wood
5c91623148
mount: Implement FUSE mount options - fixes #653
2016-09-10 09:50:46 +01:00
Fredrik Fornwall
87db3cfad3
Use Dup2 library function instead of raw syscall
...
The Dup2 syscall does not exist on 64-bit arm Linux while its
replacement Dup3 does not exist on non-Linux systems.
Using the unix.Dup2 library function instead of raw syscalls
improves the portability across more platforms.
2016-09-08 08:17:31 +01:00
Nick Craig-Wood
ca841c56a8
Disable smart dashes so --flag shows properly in the docs - fixes #632
2016-08-22 16:46:08 +01:00
Nick Craig-Wood
9e7ddd5efc
Fix tests when FUSE isn't present
2016-08-20 14:11:21 +01:00
Nick Craig-Wood
84eb7031bb
Implement the rclone cat command
2016-08-18 22:45:32 +01:00
Nick Craig-Wood
f22029bf3d
Add mount command to implement FUSE mounting of remotes #494
...
This enables any rclone remote to be mounted and used as a filesystem
with some limitations.
Only supported for Linux, FreeBSD and OS X
2016-08-18 21:54:54 +01:00
Nick Craig-Wood
ae6018355c
Correct parameter order for copy/sync etc
2016-08-06 00:07:36 +01:00
Nick Craig-Wood
e27b91ffb8
Factor each commmand into its own package
2016-08-05 17:13:54 +01:00
Nick Craig-Wood
0a7b34eefc
Move internals of rclone command into cmd so it can be imported externally
2016-08-04 22:33:46 +01:00
