This changes log statements from log to fs package, which is required for --use-json-log
to properly make log output in JSON format. The recently added custom linting rule,
handled by ruleguard via gocritic via golangci-lint, warns about these and suggests
the alternative. Fixing was therefore basically running "golangci-lint run --fix",
although some manual fixup of mainly imports are necessary following that.
This converts the ChunkedReader into an interface and provides two
implementations one sequential and one parallel.
This can be used to improve the performance of the VFS on high
bandwidth or high latency links.
Fixes#4760
The vfs use the hardcoded OS encoding when creating temp file,
but decode it with encoding for the local filesystem (--local-encoding)
when copying it to remote.
This caused failures when the filenames contained special characters.
The hardcoded OS encoding is now used uniformly.
This also
- move in use options (Opt) from vfsflags to vfscommon
- change os.FileMode to vfscommon.FileMode in parameters
- rework vfscommon.FileMode and add tests
Before this change a panic could be overwritten with the message
fatal error: sync: unlock of unlocked mutex
This was because we temporarily unlocked the mutex, but failed to lock
it again if there was a panic.
This is code is never the cause of an error but it masks the
underlying error by overwriting the panic cause.
See: https://forum.rclone.org/t/serve-webdav-is-crashing-fatal-error-sync-unlock-of-unlocked-mutex/46300
Before this change, renaming a directory d failed to rename its key in
d.parent.items, which caused trouble later when doing Dir.Stat on a
subdirectory. This change fixes the issue.
Before this change, if a file shrunk in size on the remote then rclone
could get into an loop trying to download the file forever.
The symptom was repeating errors like this:
vfs cache: restart download failed: failed to start downloader: failed to open downloader: vfs reader: failed to open source file: invalid seek position
The fix was to check that file size in various places and makes sure
that we weren't trying to download too much data.
This was a problems with backends (like s3) which update the size of
the object on Open to the actual size of the object.
Before this change, the VFS layer did not properly handle unicode normalization,
which caused problems particularly for users of macOS. While attempts were made
to handle it with various `-o modules=iconv` combinations, this was an imperfect
solution, as no one combination allowed both NFC and NFD content to
simultaneously be both visible and editable via Finder.
After this change, the VFS supports `--no-unicode-normalization` (default `false`)
via the existing `--vfs-case-insensitive` logic, which is extended to apply to both
case insensitivity and unicode normalization form.
This change also adds an additional flag, `--vfs-block-norm-dupes`, to address a
probably rare but potentially possible scenario where a directory contains
multiple duplicate filenames after applying case and unicode normalization
settings. In such a scenario, this flag (disabled by default) hides the
duplicates. This comes with a performance tradeoff, as rclone will have to scan
the entire directory for duplicates when listing a directory. For this reason,
it is recommended to leave this disabled if not needed. However, macOS users may
wish to consider using it, as otherwise, if a remote directory contains both NFC
and NFD versions of the same filename, an odd situation will occur: both
versions of the file will be visible in the mount, and both will appear to be
editable, however, editing either version will actually result in only the NFD
version getting edited under the hood. `--vfs-block-norm-dupes` prevents this
confusion by detecting this scenario, hiding the duplicates, and logging an
error, similar to how this is handled in `rclone sync`.
Before this change it wasn't possible to see where transfers were
going from and to in core/stats and core/transferred.
When use in rclone mount in particular this made interpreting the
stats very hard.
Before this change the VFS cache could get into a state where when an
object was updated remotely, the fingerprint of the item was correct
for the new object but the data in the VFS cache was for the old
object.
This fixes the problem by updating the fingerprint of the item at the
point we remove the stale data. The empty cache item now represents
the new item even though it has no data in.
This stops the fallback code for an empty fingerprint running (used
when we are writing items to the cache instead of reading them) which
was causing the problem.
Fixes#6053
See: https://forum.rclone.org/t/cached-webdav-mount-fingerprints-get-nuked-on-ls/43974/
Before this change if a backend can't upload 0 length files and
`--vfs-cache-mode writes` was in use then the writeback logic would
try to upload the 0 length file forever.
This change causes it to exit on the first failure to upload.
Summary:
In cases where cmount is not available in macOS, we alias nfsmount to mount command and transparently start the NFS server and mount it to the target dir.
The NFS server is started on localhost on a random port so it is reasonably secure.
Test Plan:
```
go run rclone.go mount --http-url https://beta.rclone.org :http: nfs-test
```
Added mount tests:
```
go test ./cmd/nfsmount
```
billy defines a common file system interface that is used in multiple go packages.
vfs.Handle implements billy.File mostly, only two methods needed to be added to
make it compliant.
An interface check is added as well.
This is a preliminary work for adding serve nfs command.
A subtle bug where dir modification time is not updated when the dir already exists
in the cache. It is only noticeable when some clients use dir modification time to
invalidate cache.
Name() method was originally left out and defaulted to the base
class which always returns empty. This trigerred incorrect behavior
in serve nfs where it relied on the Name() of the interafce to figure
out what file it was modifying.
This method is copied from RWFileHandle struct.
Added extra assert in the tests.
This almost 100% backwards compatible. The only difference being that
in the rc options/get output CacheMode will be output as strings
instead of integers. This is a lot more convenient for the user. They
still accept integer inputs though so the fallout from this should be
minimal.
This adds an additional parameter to the creation of each flag. This
specifies one or more flag groups. This **must** be set for global
flags and **must not** be set for local flags.
This causes flags.md to be built with sections to aid comprehension
and it causes the documentation pages for each command (and the
`--help`) to be built showing the flags groups as specified in the
`groups` annotation on the command.
See: https://forum.rclone.org/t/make-docs-for-mortals-not-only-rclone-gurus/39476/
This changes hasVirtual to an atomic struct variable that's updated on
add or delete from the virtual map.
This keeps it up to date and avoids deadlocks.
Signed-off-by: Anagh Kumar Baranwal <6824881+darthShadow@users.noreply.github.com>
This empties the directory cache after twice the directory cache
period to release memory.
Signed-off-by: Anagh Kumar Baranwal <6824881+darthShadow@users.noreply.github.com>
Before this change if the VFS took more than 5 to initialise (which
can happen if there is a lot of files or a lot of files which need
uploading) the backend was dropped out of the cache before the VFS was
fully created.
This was noticeable in the dropbox backend where the batcher Shutdown
too soon and prevented further uploads.
This fixes the problem by Pinning backends before the VFS cache is
created.
https://forum.rclone.org/t/if-more-than-251-elements-in-the-que-to-upload-fails-with-batcher-is-shutting-down/38076/2
Before this fix, when a write to a read only directory failed, rclone
would leav spurious directory entries in the directory.
This confuses `rclone serve webdav` into giving this error
http: superfluous response.WriteHeader
This fixes the VFS layer to remove any directory entries where the
file creation did not succeed.
Fixes#5702
This error happened on a restart of the VFS with files to upload into
a new directory on a bucket based backend. Rclone was assuming that
directories created before the restart would still exist, but this is
a bad assumption for bucket based backends which don't really have
directories.
This change creates the pretend directory and thus the directory cache
if the parent directory does not exist when adding a virtual on a
backend which can't have empty directories.
See: https://forum.rclone.org/t/that-pesky-failed-to-reload-error-message/34527
Before this change if a file was uploaded to a backend which didn't
support modtimes, the time of the file read after the upload had
completed would change to the time the file was uploaded on the
backend.
When using `--vfs-cache-mode writes` or `full` this time would be
different by the `--vfs-write-back` delay which would cause
applications to think the file had been modified.
This changes uses the last modification time read by the OS as a
virtual modtime for backends which don't support setting modtimes. It
does not change the modtime to that actually uploaded.
This means that as long as the file remains in the directory cache it
will have the expected modtime.
See: https://forum.rclone.org/t/saving-files-causes-wrong-modified-time-to-be-set-for-a-few-seconds-on-webdav-mount-with-bitrix24/36451
Before this change, if you renamed a directory containg files yet to
be uploaded then deleted the directory the files would still be
uploaded.
This fixes the problem by changing the directory path in all the file
objects in a directory when it is renamed. This wasn't necessary until
we introduced virtual files and directories which lived beyond the
directory flush mechanism.
Fixes#6809
