the field `raw` of `oauth2.Token` may be an uncomparable type(often map[string]interface{}), causing `*token != *ts.token` expression to panic(comparing uncomparable type ...).
the semantics of comparing whether two tokens are the same can be achieved by comparing accessToken, refreshToken and expire to avoid panic.
Before this change multi-thread copies using the FTP backend used to error with
551 Error reading file
This was caused by a spurious error being reported which this code silences.
Fixes#7532
See #3942
When f.opt.MaxAge == 0, f.db is never set, however several methods later assume
it is set and attempt to access it, causing an invalid memory address error.
This change fixes the issue in a few spots (there may still be others I haven't
yet encountered.)
Before this change, calling the `oauthutil.NewRenew` func may
cause goroutine leaks.
This change adds a `Shutdown` method to allow the caller to exit
the goroutine to avoid leaks.
Signed-off-by: rkonfj <rkonfj@gmail.com>
In ths security related issue the go1.21.4 stdlib changed the parsing
of volume names on Windows.
https://github.com/golang/go/issues/63713
This had the consequences of breaking the MkdirAll tests which were
looking for specific error messages which changed and using invalid
paths.
In particular under go1.21.3:
filepath.VolumeName(`\\?\C:`) == `\\?\C:`
But under go1.21.4 it is:
filepath.VolumeName(`\\?\C:`) == `\\?`
The path `\\?\C:` isn't actually a valid Windows path. I reported this
as a FYI bug upstream - I'm not expecting it to be fixed.
See: https://github.com/golang/go/issues/64101
makes the following go strings functions available to be used in custom templates; contains, hasPrefix, hasSuffix
added documentation for exported funcs
Before this change, the maximum number of connections was set to 10.
This means that b2 could deadlock while uploading multipart uploads
due to a lock being held longer than it should have been.
Before this change the concurrency used for an upload was rather
inconsistent.
- if size below `--backend-upload-cutoff` (default 200M) do single part upload.
- if size below `--multi-thread-cutoff` (default 256M) or using streaming
uploads (eg `rclone rcat) do multipart upload using
`--backend-upload-concurrency` to set the concurrency used by the uploader.
- otherwise do multipart upload using `--multi-thread-streams` to set the
concurrency.
This change makes the default for the concurrency used be the
`--backend-upload-concurrency`. If `--multi-thread-streams` is set and larger
than the `--backend-upload-concurrency` then that will be used instead.
This means that if the user sets `--backend-upload-concurrency` then it will be
obeyed for all multipart/multi-thread transfers and the user can override them
all with `--multi-thread-streams`.
See: #7056
This makes the memory controls of the s3 backend inoperative and
replaced with the global ones.
--s3-memory-pool-flush-time
--s3-memory-pool-use-mmap
By using the buffered reader this fixes excessive memory use when
uploading large files as it will share memory pages between all
readers.
Fixes#7141
I ( @boukendesho ) have volunteered to maintain the snap package so
this adds it back into the installation instructions.
It will set a `snap` tag visible in `rclone version` so we know where
it came from for support queries.
From the Go docs:
"A `nil` map is equivalent to an empty map. [1]
Therefore, an additional nil check for `opts.ExtraHeaders` before the loop is
unnecessary because `opts.ExtraHeaders` is a `map`.
[1]: https://go.dev/ref/spec#Map_types
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
This adds an additional parameter to the creation of each flag. This
specifies one or more flag groups. This **must** be set for global
flags and **must not** be set for local flags.
This causes flags.md to be built with sections to aid comprehension
and it causes the documentation pages for each command (and the
`--help`) to be built showing the flags groups as specified in the
`groups` annotation on the command.
See: https://forum.rclone.org/t/make-docs-for-mortals-not-only-rclone-gurus/39476/
Some changes about test cases:
Because MiddlewareCORS will return early on OPTIONS request,
this middleware should only be used once at NewServer function.
Test cases should pass AllowOrigin config instead of adding
this middleware again.
A new test case was added to test CORS preflight request with
an authenticator. Preflight request should always return 200 OK
regardless of autentications.
Co-authored-by: yuudi <yuudi@users.noreply.github.com>
This introduces a new fs.Option flag, Sensitive and uses this along
with IsPassword to redact the info in the config file for support
purposes.
It adds this flag into backends where appropriate. It was necessary to
add oauthutil.SharedOptions to some backends as they were missing
them.
Fixes#5209
golang.org/x/oauth2/jws is deprecated: this package is not intended for public use and
might be removed in the future. It exists for internal use only. Please switch to another
JWS package or copy this package into your own source tree.
github.com/golang-jwt/jwt/v4 seems to be a good alternative, and was already
an implicit dependency.
Before this fix, it was noticed that the rclone webdav client did not
re-use HTTP connections when it should have been.
This turned out to be because rclone was not draining the HTTP bodies
when it was not expecting a response.
From the Go docs:
> If the returned error is nil, the Response will contain a non-nil
> Body which the user is expected to close. If the Body is not both
> read to EOF and closed, the Client's underlying RoundTripper
> (typically Transport) may not be able to re-use a persistent TCP
> connection to the server for a subsequent "keep-alive" request.
This fixes the problem by draining up to 10MB of data from an HTTP
response if the NoResponse flag is set, or at the end of a JSON or XML
response (which could have some whitespace on the end).
See: https://forum.rclone.org/t/webdav-with-persistent-connections/37024/
Before this change the cancelFunc could be called twice, once while
handling the interrupt (CTRL-C) and once while unwinding the stack if
the function happened to finish.
This change ensure the cancelFunc is only called once by wrapping it
in a sync.Once
This change addresses two issues with commands that re-used
flags from common packages:
1) cobra.Command definitions did not include the command specific
prefix in doc strings.
2) Command specific flag prefixes were added after generating
command doc strings.
This ensures the virtual terminal processing mode is enabled on the rclone process
for Windows 10 consoles (by using Windows Console API functions GetConsoleMode/SetConsoleMode
and flag ENABLE_VIRTUAL_TERMINAL_PROCESSING), which adds native support for ANSI/VT100
escape sequences. This mode is default in many cases, e.g. when using the Windows
Terminal application, but in other cases it is not, and the default can also be
controlled with registry setting (see below), and therefore configuring it on the process
seem to be the only reliable way of ensuring it is enabled when supported.
[HKEY_CURRENT_USER\Console]
"VirtualTerminalLevel"=dword:00000001
Before this change only serve http was Shutting down its server which
was causing other servers such as serve restic to leave behind their
unix sockets.
This change moves the finalisation to lib/http so all servers have it
and removes it from serve http.
Fixes#6648
- add support for unix sockets (which skip the auth).
- add support for multiple listeners
- collapse unnecessary internal structure of lib/http so it can all be
imported together
- moves files in sub directories of lib/http into the main lib/http
directory and reworks the code that uses them.
See: https://forum.rclone.org/t/wip-rc-rcd-over-unix-socket/33619Fixes: #6605
The config question "Use auto config?" confused many users and lead to
recurring forum posts from users that were unaware that they were using
a remote or headless machine.
This commit makes the question and possible options more descriptive
and precise.
This commit also adds references to the guide on remote setup in the
documentation of backends using oauth as primary authentication.
* fs: add TerminalColorMode type
* fs: add new config(flags) for TerminalColorMode
* lib/terminal: use TerminalColorMode to determine how to handle colors
* Add documentation for '--terminal-color-mode'
* tree: remove obsolete --color replaced by global --color
This changes the default behaviour of tree. It now displays colors by
default instead of only displaying them when the flag -C/--color was
active. Old behaviour (no color) can be achieved by setting --color to
'never'.
Fixes: #6604
Before this patch, when an alias backend was created it would be
renamed to be canonical and in the process Shutdown would be called on
it. This was particularly noticeable with the dropbox backend which
gave this error when uploading files after the backend was Shutdown.
Failed to copy: upload failed: batcher is shutting down
This patch fixes the cache Rename code not to finalize objects if the
object that is being overwritten is the same as the existing object.
See: https://forum.rclone.org/t/upload-failed-batcher-is-shutting-down/33900
This change ensures we call the Shutdown method on backends when
they drop out of the fs/cache and at program exit.
Some backends implement the optional fs.Shutdowner interface. Until now,
Shutdown is only checked and called, when a backend is wrapped (e.g.
crypt, compress, ...).
To have a general way to perform operations at the end of the backend
lifecycle with proper error handling, we can call Shutdown at cache
clear time.
We add a finalize hook to the cache which will be called when values
drop out of the cache.
Previous discussion: https://forum.rclone.org/t/31336
strings.ReplaceAll(s, old, new) is a wrapper function for
strings.Replace(s, old, new, -1). But strings.ReplaceAll is more
readable and removes the hardcoded -1.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
golang.org/x/crypto/ssh/terminal is deprecated in favor of
golang.org/x/term, see https://pkg.go.dev/golang.org/x/crypto/ssh/terminal
The latter also supports ReadPassword on solaris, so enable the
respective functionality in fs/config for solaris as well.
The directory created by `T.TempDir` is automatically removed when the
test and all its subtests complete.
Reference: https://pkg.go.dev/testing#T.TempDir
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Until Windows 10 version 2004 (May 2020) this can be found from registry entry
ReleaseID, after that we must use entry DisplayVersion (ReleaseId is stuck at 2009).
Source: https://ss64.com/nt/ver.html
MEGAcmd currently includes escaped HTML4 entites in its XML messages.
This behavior deviates from the XML standard, but currently it prevents
rclone from being able to use the remote.
Before this change the oauth webserver would crash if it received a
request to /robots.txt.
This patch makes it ignore (with 404 error) any paths it isn't
expecting.
This is possible now that we no longer support go1.12 and brings
rclone into line with standard practices in the Go world.
This also removes errors.New and errors.Errorf from lib/errors and
prefers the stdlib errors package over lib/errors.
Some day in the past the Slash encode option was added to Onedrive
encoder so it began to encode slashes in file names rather then treat
them as path separators.
This patch adapts benchmark test cases accordingly.
Fixes#5659
After testing concurrent calling of `kv.Start` and `db.Stop` I had to restrict
more parts of these under mutex to make results deterministic without Sleep's
in the test body. It's more safe but has potential to lock Start for up to
2 seconds due to `db.open`.
