This flag allows users to disable the reflink cloning feature and instead force
"deep" copies, for certain use cases where data redundancy is preferable. It is
functionally equivalent to using `--disable Copy` on local.
fix#7824
Statements like rclone copy <somewhere> . will spontaneously miss
if . expands to a path with a Full Width replacement character.
This is due to the incorrect order in which
relative paths and decoding were handled in the original implementation.
In this commit (2014 for v1.02) Purge was implemented for the local
backend:
1527e64ee7 local: Implement Purger interface
This appeared to be implemented just to make a Purge and doesn't
appear to do anything useful.
It is in fact significatly worse than the rclone fallback purge since
it doesn't operate in parallel or update stats.
This patch removes the Purge routine for a consequent speed up and
showing of stats.
See: https://forum.rclone.org/t/progress-flag-for-rclone-purge/44416
A consequence of this is that fs.Directory returned by the local
backend will now have a correct size in (rather than -1). Some tests
depended on this and have been fixed by this commit too.
Similar to
acf1e2df84,
go1.21.4 appears to have broken sync.MoveDir on Windows because
filepath.VolumeName() returns `\\?` instead of `\\?\C:` in cleanRootPath. It
looks like the Go team is aware of the issue and planning a fix, so this may
only be needed temporarily.
For some files the Windows Volume Shadow Service (VSS) advertises the
file size as X in the directory listing but returns a different number
Y on stat-ing the file. If the file is opened and read there are Y
bytes available for reading.
Existing copy tools copy Y bytes rather than X so for consistency
rclone should do the same.
This fixes the problem by stat-ing the file immediately before opening
it. This will also reduce the unnecessary occurrence of "can't copy -
source file is being updated" errors; if the file has finished
changing by the time we come to copy it then we now can copy it
successfully.
See: https://forum.rclone.org/t/consistently-getting-corrupted-on-transfer-sizes-differ-syncing-to-an-smb-share/42218/
Before this change if a directory entry could be listed but not
lstat-ed then rclone would give an error and abort the directory
listing with the error
failed to read directory entry: failed to read directory "XXX": lstat XXX
This change makes sure that the directory listing carries on even
after this kind of error.
The sync will be failed but it will carry on.
This problem was caused by a programming error setting the err
variable in an outer scope when it should have been using a local err
variable.
See: https://forum.rclone.org/t/sync-aborts-if-even-one-single-unreadable-folder-is-encountered/39653
Implement a Partialuploads feature flag to mark backends for which
uploads are not atomic.
This is set for the following backends
- local
- ftp
- sftp
See #3770
Before this change using /path/to/file.rclonelink would not find the
file when using -l/--links.
This fixes the problem by doing another stat call if the file wasn't
found without the suffix if -l/--links is in use.
It will also give an error if you refer to a symlink without its
suffix which will not work because the limit to a single file
filtering will be using the file name without the .rclonelink suffix.
need ".rclonelink" suffix to refer to symlink when using -l/--links
Before this change it would use the symlink as a directory which then
would fail when listed.
See: #6855
Before this fix, a dangling symlink was erroring the sync. It was
writing an ERROR log and causing rclone to exit with an error. The
List method wasn't returning an error though.
This fix makes sure that we don't log or report a global error on a
file/directory that has been excluded.
This feature was first implemented in:
a61d219bc local: fix -L/--copy-links with filters missing directories
Then fixed in:
8d1fff9a8 local: obey file filters in listing to fix errors on excluded files
This commit also adds test cases for the failure modes of those commits.
See #6376
In this commit
8d1fff9a82 local: obey file filters in listing to fix errors on excluded files
We introduced the concept of local backend filters.
Unfortunately the filters were being applied before we had resolved
the symlink to point to a directory. This meant that symlinks pointing
to directories were filtered out when they shouldn't have been.
This was fixed by moving the filter check until after the symlink had
been resolved.
See: https://forum.rclone.org/t/copy-links-not-following-symlinks-on-1-60-0/34073/7
In this commit
8d1fff9a82 local: obey file filters in listing to fix errors on excluded files
We started using filters in the local backend so the user could short
circuit troublesome files/directories at a low level.
However this caused a number of integration tests to fail. This turned
out to be in backends wrapping the local backend. For example the
combine backend test failed because it changes the paths passed to the
local backend so they no longer match the paths in the current filter.
To fix this, a new feature flag `FilterAware` was added and the
UseFilter context flag is only passed to backends which support it. As
the wrapping backends don't support the flag, this fixes the problems
in the integration tests.
In future the wrapping backends could modify the active filters to
match the path modifications and then they could set the FilterAware
flag.
See #6376
Before this change, if rclone was run with `-M` on a filesystem
without xattr support, it would error out.
This patch makes rclone detect the not supported errors and disable
xattrs from then on. It prints one ERROR level message about this.
See: https://forum.rclone.org/t/metadata-update-local-s3/32277/7
Before this fix if a file was updated, but to the same length and
timestamp then the local backend would return the wrong (cached)
hashes for the object.
This happens regularly on a crypted local disk mount when the VFS
thinks files have been changed but actually their contents are
identical to that written previously. This is because when files are
uploaded their nonce changes so the contents of the file changes but
the timestamp and size remain the same because the file didn't
actually change.
This causes errors like this:
ERROR: file: Failed to copy: corrupted on transfer: md5 crypted
hash differ "X" vs "Y"
This turned out to be because the local backend wasn't clearing its
cache of hashes when the file was updated.
This fix clears the hash cache for Update and Remove.
It also puts a src and destination in the crypt message to make future
debugging easier.
Fixes#4031
This is possible now that we no longer support go1.12 and brings
rclone into line with standard practices in the Go world.
This also removes errors.New and errors.Errorf from lib/errors and
prefers the stdlib errors package over lib/errors.
This changes the interface to NewObject so that if NewObject is called
on a directory then it should return fs.ErrorIsDir if possible without
doing any extra work, otherwise fs.ErrorObjectNotFound.
Tested on integration test server with:
go run integration-test.go -tests backend -run TestIntegration/FsMkdir/FsPutFiles/FsNewObjectDir -branch fix-stat -maxtries 1
This replaces built-in os.MkdirAll with a patched version that stops the recursion
when reaching the volume part of the path. The original version would continue recursion,
and for extended length paths end up with \\? as the top-level directory, and the error
message would then be something like:
mkdir \\?: The filename, directory name, or volume label syntax is incorrect.
This change fixes the bug described below:
if a file is removed while the local backend List() runs,
the call will flag an accounting error.
The bug manifests itself if local backend is the Sync target
due to intrinsic concurrency.
The odds to hit this bug depend on --checkers and --transfers.
Chunker over local backend is affected even more because
updating a composite object with a smaller size content
translates into removing chunks on the underlying file system
and involves a number of List() calls.
macOS stores files in NFD form and transferring them like this to some
systems causes the Korean language to display incorrectly.
This adds the flag --local-unicode-normalization to optionally
normalize the file names to NFC.
This also removes the (long deprecated) --local-no-unicode-normalization flag
See: https://forum.rclone.org/t/support-for-korean-jaso-conversion/19435
It was discovered on some Android systems, the stat size of a symlink
is different to the size that readlink returns.
This was giving errors like this
transport connection broken: http: ContentLength=30 with Body length 28
There are enough exceptions to the size of readlink being different to
the size of stat that this patch now always does readlink to work out
the size of a symlink.
Since symlinks are relatively uncommon this shouldn't affect
performance too much and will mean that the size is always correct.
This deprecates the --local-zero-size-links flag which is now
effectively always enabled.
See: https://forum.rclone.org/t/problem-with-symlinks-and-links/23840/
Some virtual filesystems (such as Google Drive File Stream) may
incorrectly set the actual file size equal to the preallocated space,
causing checksum and file size checks to fail.
This flag can be used to disable preallocation for local backends of
this type.
Assume the Stat size of links is zero (and read them instead)
On some virtual filesystems (such ash LucidLink), reading a link size via a
Stat call always returns 0.
However, on unix it reads as the length of the text in the link. This may
cause errors like this when syncing:
Failed to copy: corrupted on transfer: sizes differ 0 vs 13
Setting this flag causes rclone to read the link and use that as the size of
the link instead of 0 which in most cases fixes the problem.
Fixes#4950
Signed-off-by: Riccardo Iaconelli <riccardo@kde.org>
Before this change a circular symlink would cause rclone to error out from the listings.
After this change rclone will skip a circular symlink and carry on the listing,
producing an error at the end.
Fixes#4743
This adds a context.Context parameter to NewFs and related calls.
This is necessary as part of reading config from the context -
backends need to be able to read the global config.
Before this change rclone returned the size from the Stat call of the
link. On Windows this reads as 0 always, however on unix it reads as
the length of the text in the link. This caused errors like this when
syncing:
Failed to copy: corrupted on transfer: sizes differ 0 vs 13
This change causes Windows platforms to read the link and use that as
the size of the link instead of 0 which fixes the problem.
