--- title: "Global Flags" description: "Rclone Global Flags" --- # Global Flags This describes the global flags available to every rclone command split into two groups, non backend and backend flags. ## Non Backend Flags These flags are available for every command. ``` --ask-password Allow prompt for password for encrypted configuration. (default true) --auto-confirm If enabled, do not request console confirmation. --backup-dir string Make backups into hierarchy based in DIR. --bind string Local address to bind to for outgoing connections, IPv4, IPv6 or name. --buffer-size SizeSuffix In memory buffer size when reading files for each --transfer. (default 16Mi) --bwlimit BwTimetable Bandwidth limit in KiByte/s, or use suffix B|K|M|G|T|P or a full timetable. --bwlimit-file BwTimetable Bandwidth limit per file in KiByte/s, or use suffix B|K|M|G|T|P or a full timetable. --ca-cert string CA certificate used to verify servers --cache-dir string Directory rclone will use for caching. (default "$HOME/.cache/rclone") --check-first Do all the checks before starting transfers. --checkers int Number of checkers to run in parallel. (default 8) -c, --checksum Skip based on checksum (if available) & size, not mod-time & size --client-cert string Client SSL certificate (PEM) for mutual TLS auth --client-key string Client SSL private key (PEM) for mutual TLS auth --compare-dest stringArray Include additional comma separated server-side paths during comparison. --config string Config file. (default "$HOME/.config/rclone/rclone.conf") --contimeout duration Connect timeout (default 1m0s) --copy-dest stringArray Implies --compare-dest but also copies files from paths into destination. --cpuprofile string Write cpu profile to file --cutoff-mode string Mode to stop transfers when reaching the max transfer limit HARD|SOFT|CAUTIOUS (default "HARD") --delete-after When synchronizing, delete files on destination after transferring (default) --delete-before When synchronizing, delete files on destination before transferring --delete-during When synchronizing, delete files during transfer --delete-excluded Delete files on dest excluded from sync --disable string Disable a comma separated list of features. Use --disable help to see a list. --disable-http2 Disable HTTP/2 in the global transport. -n, --dry-run Do a trial run with no permanent changes --dscp string Set DSCP value to connections. Can be value or names, eg. CS1, LE, DF, AF21. --dump DumpFlags List of items to dump from: headers,bodies,requests,responses,auth,filters,goroutines,openfiles --dump-bodies Dump HTTP headers and bodies - may contain sensitive info --dump-headers Dump HTTP headers - may contain sensitive info --error-on-no-transfer Sets exit code 9 if no files are transferred, useful in scripts --exclude stringArray Exclude files matching pattern --exclude-from stringArray Read exclude patterns from file (use - to read from stdin) --exclude-if-present string Exclude directories if filename is present --expect-continue-timeout duration Timeout when using expect / 100-continue in HTTP (default 1s) --fast-list Use recursive list if available. Uses more memory but fewer transactions. --files-from stringArray Read list of source-file names from file (use - to read from stdin) --files-from-raw stringArray Read list of source-file names from file without any processing of lines (use - to read from stdin) -f, --filter stringArray Add a file-filtering rule --filter-from stringArray Read filtering patterns from a file (use - to read from stdin) --fs-cache-expire-duration duration cache remotes for this long (0 to disable caching) (default 5m0s) --fs-cache-expire-interval duration interval to check for expired remotes (default 1m0s) --header stringArray Set HTTP header for all transactions --header-download stringArray Set HTTP header for download transactions --header-upload stringArray Set HTTP header for upload transactions --ignore-case Ignore case in filters (case insensitive) --ignore-case-sync Ignore case when synchronizing --ignore-checksum Skip post copy check of checksums. --ignore-errors delete even if there are I/O errors --ignore-existing Skip all files that exist on destination --ignore-size Ignore size when skipping use mod-time or checksum. -I, --ignore-times Don't skip files that match size and time - transfer all files --immutable Do not modify files. Fail if existing files have been modified. --include stringArray Include files matching pattern --include-from stringArray Read include patterns from file (use - to read from stdin) -i, --interactive Enable interactive mode --log-file string Log everything to this file --log-format string Comma separated list of log format options (default "date,time") --log-level string Log level DEBUG|INFO|NOTICE|ERROR (default "NOTICE") --log-systemd Activate systemd integration for the logger. --low-level-retries int Number of low level retries to do. (default 10) --max-age Duration Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off) --max-backlog int Maximum number of objects in sync or check backlog. (default 10000) --max-delete int When synchronizing, limit the number of deletes (default -1) --max-depth int If set limits the recursion depth to this. (default -1) --max-duration duration Maximum duration rclone will transfer data for. --max-size SizeSuffix Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off) --max-stats-groups int Maximum number of stats groups to keep in memory. On max oldest is discarded. (default 1000) --max-transfer SizeSuffix Maximum size of data to transfer. (default off) --memprofile string Write memory profile to file --min-age Duration Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off) --min-size SizeSuffix Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off) --modify-window duration Max time diff to be considered the same (default 1ns) --multi-thread-cutoff SizeSuffix Use multi-thread downloads for files above this size. (default 250Mi) --multi-thread-streams int Max number of streams to use for multi-thread downloads. (default 4) --no-check-certificate Do not verify the server SSL certificate. Insecure. --no-check-dest Don't check the destination, copy regardless. --no-console Hide console window. Supported on Windows only. --no-gzip-encoding Don't set Accept-Encoding: gzip. --no-traverse Don't traverse destination file system on copy. --no-unicode-normalization Don't normalize unicode characters in filenames. --no-update-modtime Don't update destination mod-time if files identical. --order-by string Instructions on how to order the transfers, e.g. 'size,descending' --password-command SpaceSepList Command for supplying password for encrypted configuration. -P, --progress Show progress during transfer. --progress-terminal-title Show progress on the terminal title. Requires -P/--progress. -q, --quiet Print as little stuff as possible --rc Enable the remote control server. --rc-addr string IPaddress:Port or :Port to bind server to. (default "localhost:5572") --rc-allow-origin string Set the allowed origin for CORS. --rc-baseurl string Prefix for URLs - leave blank for root. --rc-cert string SSL PEM key (concatenation of certificate and CA certificate) --rc-client-ca string Client certificate authority to verify clients with --rc-enable-metrics Enable prometheus metrics on /metrics --rc-files string Path to local files to serve on the HTTP server. --rc-htpasswd string htpasswd file - if not provided no authentication is done --rc-job-expire-duration duration expire finished async jobs older than this value (default 1m0s) --rc-job-expire-interval duration interval to check for expired async jobs (default 10s) --rc-key string SSL PEM Private key --rc-max-header-bytes int Maximum size of request header (default 4096) --rc-no-auth Don't require auth for certain methods. --rc-pass string Password for authentication. --rc-realm string realm for authentication (default "rclone") --rc-serve Enable the serving of remote objects. --rc-server-read-timeout duration Timeout for server reading data (default 1h0m0s) --rc-server-write-timeout duration Timeout for server writing data (default 1h0m0s) --rc-template string User Specified Template. --rc-user string User name for authentication. --rc-web-fetch-url string URL to fetch the releases for webgui. (default "https://api.github.com/repos/rclone/rclone-webui-react/releases/latest") --rc-web-gui Launch WebGUI on localhost --rc-web-gui-force-update Force update to latest version of web gui --rc-web-gui-no-open-browser Don't open the browser automatically --rc-web-gui-update Check and update to latest version of web gui --refresh-times Refresh the modtime of remote files. --retries int Retry operations this many times if they fail (default 3) --retries-sleep duration Interval between retrying operations if they fail, e.g 500ms, 60s, 5m. (0 to disable) --size-only Skip based on size only, not mod-time or checksum --stats duration Interval between printing stats, e.g 500ms, 60s, 5m. (0 to disable) (default 1m0s) --stats-file-name-length int Max file name length in stats. 0 for no limit (default 45) --stats-log-level string Log level to show --stats output DEBUG|INFO|NOTICE|ERROR (default "INFO") --stats-one-line Make the stats fit on one line. --stats-one-line-date Enables --stats-one-line and add current date/time prefix. --stats-one-line-date-format string Enables --stats-one-line-date and uses custom formatted date. Enclose date string in double quotes ("). See https://golang.org/pkg/time/#Time.Format --stats-unit string Show data rate in stats as either 'bits' or 'bytes' per second (default "bytes") --streaming-upload-cutoff SizeSuffix Cutoff for switching to chunked upload if file size is unknown. Upload starts after reaching cutoff or when file ends. (default 100Ki) --suffix string Suffix to add to changed files. --suffix-keep-extension Preserve the extension when using --suffix. --syslog Use Syslog for logging --syslog-facility string Facility for syslog, e.g. KERN,USER,... (default "DAEMON") --timeout duration IO idle timeout (default 5m0s) --tpslimit float Limit HTTP transactions per second to this. --tpslimit-burst int Max burst of transactions for --tpslimit. (default 1) --track-renames When synchronizing, track file renames and do a server-side move if possible --track-renames-strategy string Strategies to use when synchronizing using track-renames hash|modtime|leaf (default "hash") --transfers int Number of file transfers to run in parallel. (default 4) -u, --update Skip files that are newer on the destination. --use-cookies Enable session cookiejar. --use-json-log Use json log format. --use-mmap Use mmap allocator (see docs). --use-server-modtime Use server modified time instead of object metadata --user-agent string Set the user-agent to a specified string. The default is rclone/ version (default "rclone/v1.56.0") -v, --verbose count Print lots more stuff (repeat for more) ``` ## Backend Flags These flags are available for every command. They control the backends and may be set in the config file. ``` --acd-auth-url string Auth server URL. --acd-client-id string OAuth Client Id --acd-client-secret string OAuth Client Secret --acd-encoding MultiEncoder This sets the encoding for the backend. (default Slash,InvalidUtf8,Dot) --acd-templink-threshold SizeSuffix Files >= this size will be downloaded via their tempLink. (default 9Gi) --acd-token string OAuth Access Token as a JSON blob. --acd-token-url string Token server url. --acd-upload-wait-per-gb Duration Additional time per GiB to wait after a failed complete upload to see if it appears. (default 3m0s) --alias-remote string Remote or path to alias. --azureblob-access-tier string Access tier of blob: hot, cool or archive. --azureblob-account string Storage Account Name (leave blank to use SAS URL or Emulator) --azureblob-archive-tier-delete Delete archive tier blobs before overwriting. --azureblob-chunk-size SizeSuffix Upload chunk size (<= 100 MiB). (default 4Mi) --azureblob-disable-checksum Don't store MD5 checksum with object metadata. --azureblob-encoding MultiEncoder This sets the encoding for the backend. (default Slash,BackSlash,Del,Ctl,RightPeriod,InvalidUtf8) --azureblob-endpoint string Endpoint for the service --azureblob-key string Storage Account Key (leave blank to use SAS URL or Emulator) --azureblob-list-chunk int Size of blob list. (default 5000) --azureblob-memory-pool-flush-time Duration How often internal memory buffer pools will be flushed. (default 1m0s) --azureblob-memory-pool-use-mmap Whether to use mmap buffers in internal memory pool. --azureblob-msi-client-id string Object ID of the user-assigned MSI to use, if any. Leave blank if msi_object_id or msi_mi_res_id specified. --azureblob-msi-mi-res-id string Azure resource ID of the user-assigned MSI to use, if any. Leave blank if msi_client_id or msi_object_id specified. --azureblob-msi-object-id string Object ID of the user-assigned MSI to use, if any. Leave blank if msi_client_id or msi_mi_res_id specified. --azureblob-public-access string Public access level of a container: blob, container. --azureblob-sas-url string SAS URL for container level access only --azureblob-service-principal-file string Path to file containing credentials for use with a service principal. --azureblob-upload-cutoff string Cutoff for switching to chunked upload (<= 256 MiB). (Deprecated) --azureblob-use-emulator Uses local storage emulator if provided as 'true' (leave blank if using real azure storage endpoint) --azureblob-use-msi Use a managed service identity to authenticate (only works in Azure) --b2-account string Account ID or Application Key ID --b2-chunk-size SizeSuffix Upload chunk size. Must fit in memory. (default 96Mi) --b2-copy-cutoff SizeSuffix Cutoff for switching to multipart copy (default 4Gi) --b2-disable-checksum Disable checksums for large (> upload cutoff) files --b2-download-auth-duration Duration Time before the authorization token will expire in s or suffix ms|s|m|h|d. (default 1w) --b2-download-url string Custom endpoint for downloads. --b2-encoding MultiEncoder This sets the encoding for the backend. (default Slash,BackSlash,Del,Ctl,InvalidUtf8,Dot) --b2-endpoint string Endpoint for the service. --b2-hard-delete Permanently delete files on remote removal, otherwise hide files. --b2-key string Application Key --b2-memory-pool-flush-time Duration How often internal memory buffer pools will be flushed. (default 1m0s) --b2-memory-pool-use-mmap Whether to use mmap buffers in internal memory pool. --b2-test-mode string A flag string for X-Bz-Test-Mode header for debugging. --b2-upload-cutoff SizeSuffix Cutoff for switching to chunked upload. (default 200Mi) --b2-versions Include old versions in directory listings. --box-access-token string Box App Primary Access Token --box-auth-url string Auth server URL. --box-box-config-file string Box App config.json location --box-box-sub-type string (default "user") --box-client-id string OAuth Client Id --box-client-secret string OAuth Client Secret --box-commit-retries int Max number of times to try committing a multipart file. (default 100) --box-encoding MultiEncoder This sets the encoding for the backend. (default Slash,BackSlash,Del,Ctl,RightSpace,InvalidUtf8,Dot) --box-root-folder-id string Fill in for rclone to use a non root folder as its starting point. --box-token string OAuth Access Token as a JSON blob. --box-token-url string Token server url. --box-upload-cutoff SizeSuffix Cutoff for switching to multipart upload (>= 50 MiB). (default 50Mi) --cache-chunk-clean-interval Duration How often should the cache perform cleanups of the chunk storage. (default 1m0s) --cache-chunk-no-memory Disable the in-memory cache for storing chunks during streaming. --cache-chunk-path string Directory to cache chunk files. (default "$HOME/.cache/rclone/cache-backend") --cache-chunk-size SizeSuffix The size of a chunk (partial file data). (default 5Mi) --cache-chunk-total-size SizeSuffix The total size that the chunks can take up on the local disk. (default 10Gi) --cache-db-path string Directory to store file structure metadata DB. (default "$HOME/.cache/rclone/cache-backend") --cache-db-purge Clear all the cached data for this remote on start. --cache-db-wait-time Duration How long to wait for the DB to be available - 0 is unlimited (default 1s) --cache-info-age Duration How long to cache file structure information (directory listings, file size, times, etc.). (default 6h0m0s) --cache-plex-insecure string Skip all certificate verification when connecting to the Plex server --cache-plex-password string The password of the Plex user (obscured) --cache-plex-url string The URL of the Plex server --cache-plex-username string The username of the Plex user --cache-read-retries int How many times to retry a read from a cache storage. (default 10) --cache-remote string Remote to cache. --cache-rps int Limits the number of requests per second to the source FS (-1 to disable) (default -1) --cache-tmp-upload-path string Directory to keep temporary files until they are uploaded. --cache-tmp-wait-time Duration How long should files be stored in local cache before being uploaded (default 15s) --cache-workers int How many workers should run in parallel to download chunks. (default 4) --cache-writes Cache file data on writes through the FS --chunker-chunk-size SizeSuffix Files larger than chunk size will be split in chunks. (default 2Gi) --chunker-fail-hard Choose how chunker should handle files with missing or invalid chunks. --chunker-hash-type string Choose how chunker handles hash sums. All modes but "none" require metadata. (default "md5") --chunker-remote string Remote to chunk/unchunk. --compress-level int GZIP compression level (-2 to 9). (default -1) --compress-mode string Compression mode. (default "gzip") --compress-ram-cache-limit SizeSuffix Some remotes don't allow the upload of files with unknown size. (default 20Mi) --compress-remote string Remote to compress. -L, --copy-links Follow symlinks and copy the pointed to item. --crypt-directory-name-encryption Option to either encrypt directory names or leave them intact. (default true) --crypt-filename-encryption string How to encrypt the filenames. (default "standard") --crypt-no-data-encryption Option to either encrypt file data or leave it unencrypted. --crypt-password string Password or pass phrase for encryption. (obscured) --crypt-password2 string Password or pass phrase for salt. Optional but recommended. (obscured) --crypt-remote string Remote to encrypt/decrypt. --crypt-server-side-across-configs Allow server-side operations (e.g. copy) to work across different crypt configs. --crypt-show-mapping For all files listed show how the names encrypt. --drive-acknowledge-abuse Set to allow files which return cannotDownloadAbusiveFile to be downloaded. --drive-allow-import-name-change Allow the filetype to change when uploading Google docs (e.g. file.doc to file.docx). This will confuse sync and reupload every time. --drive-auth-owner-only Only consider files owned by the authenticated user. --drive-auth-url string Auth server URL. --drive-chunk-size SizeSuffix Upload chunk size. Must a power of 2 >= 256k. (default 8Mi) --drive-client-id string Google Application Client Id --drive-client-secret string OAuth Client Secret --drive-disable-http2 Disable drive using http2 (default true) --drive-encoding MultiEncoder This sets the encoding for the backend. (default InvalidUtf8) --drive-export-formats string Comma separated list of preferred formats for downloading Google docs. (default "docx,xlsx,pptx,svg") --drive-formats string Deprecated: see export_formats --drive-impersonate string Impersonate this user when using a service account. --drive-import-formats string Comma separated list of preferred formats for uploading Google docs. --drive-keep-revision-forever Keep new head revision of each file forever. --drive-list-chunk int Size of listing chunk 100-1000. 0 to disable. (default 1000) --drive-pacer-burst int Number of API calls to allow without sleeping. (default 100) --drive-pacer-min-sleep Duration Minimum time to sleep between API calls. (default 100ms) --drive-root-folder-id string ID of the root folder --drive-scope string Scope that rclone should use when requesting access from drive. --drive-server-side-across-configs Allow server-side operations (e.g. copy) to work across different drive configs. --drive-service-account-credentials string Service Account Credentials JSON blob --drive-service-account-file string Service Account Credentials JSON file path --drive-shared-with-me Only show files that are shared with me. --drive-size-as-quota Show sizes as storage quota usage, not actual size. --drive-skip-checksum-gphotos Skip MD5 checksum on Google photos and videos only. --drive-skip-gdocs Skip google documents in all listings. --drive-skip-shortcuts If set skip shortcut files --drive-starred-only Only show files that are starred. --drive-stop-on-download-limit Make download limit errors be fatal --drive-stop-on-upload-limit Make upload limit errors be fatal --drive-team-drive string ID of the Shared Drive (Team Drive) --drive-token string OAuth Access Token as a JSON blob. --drive-token-url string Token server url. --drive-trashed-only Only show files that are in the trash. --drive-upload-cutoff SizeSuffix Cutoff for switching to chunked upload (default 8Mi) --drive-use-created-date Use file created date instead of modified date., --drive-use-shared-date Use date file was shared instead of modified date. --drive-use-trash Send files to the trash instead of deleting permanently. (default true) --drive-v2-download-min-size SizeSuffix If Object's are greater, use drive v2 API to download. (default off) --dropbox-auth-url string Auth server URL. --dropbox-batch-mode string Upload file batching sync|async|off. (default "sync") --dropbox-batch-size int Max number of files in upload batch. --dropbox-batch-timeout Duration Max time to allow an idle upload batch before uploading (default 0s) --dropbox-chunk-size SizeSuffix Upload chunk size. (< 150Mi). (default 48Mi) --dropbox-client-id string OAuth Client Id --dropbox-client-secret string OAuth Client Secret --dropbox-encoding MultiEncoder This sets the encoding for the backend. (default Slash,BackSlash,Del,RightSpace,InvalidUtf8,Dot) --dropbox-impersonate string Impersonate this user when using a business account. --dropbox-shared-files Instructs rclone to work on individual shared files. --dropbox-shared-folders Instructs rclone to work on shared folders. --dropbox-token string OAuth Access Token as a JSON blob. --dropbox-token-url string Token server url. --fichier-api-key string Your API Key, get it from https://1fichier.com/console/params.pl --fichier-encoding MultiEncoder This sets the encoding for the backend. (default Slash,LtGt,DoubleQuote,SingleQuote,BackQuote,Dollar,BackSlash,Del,Ctl,LeftSpace,RightSpace,InvalidUtf8,Dot) --fichier-file-password string If you want to download a shared file that is password protected, add this parameter (obscured) --fichier-folder-password string If you want to list the files in a shared folder that is password protected, add this parameter (obscured) --fichier-shared-folder string If you want to download a shared folder, add this parameter --filefabric-encoding MultiEncoder This sets the encoding for the backend. (default Slash,Del,Ctl,InvalidUtf8,Dot) --filefabric-permanent-token string Permanent Authentication Token --filefabric-root-folder-id string ID of the root folder --filefabric-token string Session Token --filefabric-token-expiry string Token expiry time --filefabric-url string URL of the Enterprise File Fabric to connect to --filefabric-version string Version read from the file fabric --ftp-close-timeout Duration Maximum time to wait for a response to close. (default 1m0s) --ftp-concurrency int Maximum number of FTP simultaneous connections, 0 for unlimited --ftp-disable-epsv Disable using EPSV even if server advertises support --ftp-disable-mlsd Disable using MLSD even if server advertises support --ftp-encoding MultiEncoder This sets the encoding for the backend. (default Slash,Del,Ctl,RightSpace,Dot) --ftp-explicit-tls Use Explicit FTPS (FTP over TLS) --ftp-host string FTP host to connect to --ftp-idle-timeout Duration Max time before closing idle connections (default 1m0s) --ftp-no-check-certificate Do not verify the TLS certificate of the server --ftp-pass string FTP password (obscured) --ftp-port string FTP port, leave blank to use default (21) --ftp-tls Use Implicit FTPS (FTP over TLS) --ftp-user string FTP username, leave blank for current username, $USER --gcs-anonymous Access public buckets and objects without credentials --gcs-auth-url string Auth server URL. --gcs-bucket-acl string Access Control List for new buckets. --gcs-bucket-policy-only Access checks should use bucket-level IAM policies. --gcs-client-id string OAuth Client Id --gcs-client-secret string OAuth Client Secret --gcs-encoding MultiEncoder This sets the encoding for the backend. (default Slash,CrLf,InvalidUtf8,Dot) --gcs-location string Location for the newly created buckets. --gcs-object-acl string Access Control List for new objects. --gcs-project-number string Project number. --gcs-service-account-file string Service Account Credentials JSON file path --gcs-storage-class string The storage class to use when storing objects in Google Cloud Storage. --gcs-token string OAuth Access Token as a JSON blob. --gcs-token-url string Token server url. --gphotos-auth-url string Auth server URL. --gphotos-client-id string OAuth Client Id --gphotos-client-secret string OAuth Client Secret --gphotos-include-archived Also view and download archived media. --gphotos-read-only Set to make the Google Photos backend read only. --gphotos-read-size Set to read the size of media items. --gphotos-start-year int Year limits the photos to be downloaded to those which are uploaded after the given year (default 2000) --gphotos-token string OAuth Access Token as a JSON blob. --gphotos-token-url string Token server url. --hdfs-data-transfer-protection string Kerberos data transfer protection: authentication|integrity|privacy --hdfs-encoding MultiEncoder This sets the encoding for the backend. (default Slash,Colon,Del,Ctl,InvalidUtf8,Dot) --hdfs-namenode string hadoop name node and port --hdfs-service-principal-name string Kerberos service principal name for the namenode --hdfs-username string hadoop user name --http-headers CommaSepList Set HTTP headers for all transactions --http-no-head Don't use HEAD requests to find file sizes in dir listing --http-no-slash Set this if the site doesn't end directories with / --http-url string URL of http host to connect to --hubic-auth-url string Auth server URL. --hubic-chunk-size SizeSuffix Above this size files will be chunked into a _segments container. (default 5Gi) --hubic-client-id string OAuth Client Id --hubic-client-secret string OAuth Client Secret --hubic-encoding MultiEncoder This sets the encoding for the backend. (default Slash,InvalidUtf8) --hubic-no-chunk Don't chunk files during streaming upload. --hubic-token string OAuth Access Token as a JSON blob. --hubic-token-url string Token server url. --jottacloud-encoding MultiEncoder This sets the encoding for the backend. (default Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,Del,Ctl,InvalidUtf8,Dot) --jottacloud-hard-delete Delete files permanently rather than putting them into the trash. --jottacloud-md5-memory-limit SizeSuffix Files bigger than this will be cached on disk to calculate the MD5 if required. (default 10Mi) --jottacloud-no-versions Avoid server side versioning by deleting files and recreating files instead of overwriting them. --jottacloud-trashed-only Only show files that are in the trash. --jottacloud-upload-resume-limit SizeSuffix Files bigger than this can be resumed if the upload fail's. (default 10Mi) --koofr-encoding MultiEncoder This sets the encoding for the backend. (default Slash,BackSlash,Del,Ctl,InvalidUtf8,Dot) --koofr-endpoint string The Koofr API endpoint to use (default "https://app.koofr.net") --koofr-mountid string Mount ID of the mount to use. If omitted, the primary mount is used. --koofr-password string Your Koofr password for rclone (generate one at https://app.koofr.net/app/admin/preferences/password) (obscured) --koofr-setmtime Does the backend support setting modification time. Set this to false if you use a mount ID that points to a Dropbox or Amazon Drive backend. (default true) --koofr-user string Your Koofr user name -l, --links Translate symlinks to/from regular files with a '.rclonelink' extension --local-case-insensitive Force the filesystem to report itself as case insensitive --local-case-sensitive Force the filesystem to report itself as case sensitive. --local-encoding MultiEncoder This sets the encoding for the backend. (default Slash,Dot) --local-no-check-updated Don't check to see if the files change during upload --local-no-preallocate Disable preallocation of disk space for transferred files --local-no-set-modtime Disable setting modtime --local-no-sparse Disable sparse files for multi-thread downloads --local-nounc string Disable UNC (long path names) conversion on Windows --local-unicode-normalization Apply unicode NFC normalization to paths and filenames --local-zero-size-links Assume the Stat size of links is zero (and read them instead) (Deprecated) --mailru-check-hash What should copy do if file checksum is mismatched or invalid (default true) --mailru-encoding MultiEncoder This sets the encoding for the backend. (default Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,Del,Ctl,InvalidUtf8,Dot) --mailru-pass string Password (obscured) --mailru-speedup-enable Skip full upload if there is another file with same data hash. (default true) --mailru-speedup-file-patterns string Comma separated list of file name patterns eligible for speedup (put by hash). (default "*.mkv,*.avi,*.mp4,*.mp3,*.zip,*.gz,*.rar,*.pdf") --mailru-speedup-max-disk SizeSuffix This option allows you to disable speedup (put by hash) for large files (default 3Gi) --mailru-speedup-max-memory SizeSuffix Files larger than the size given below will always be hashed on disk. (default 32Mi) --mailru-user string User name (usually email) --mega-debug Output more debug from Mega. --mega-encoding MultiEncoder This sets the encoding for the backend. (default Slash,InvalidUtf8,Dot) --mega-hard-delete Delete files permanently rather than putting them into the trash. --mega-pass string Password. (obscured) --mega-user string User name -x, --one-file-system Don't cross filesystem boundaries (unix/macOS only). --onedrive-auth-url string Auth server URL. --onedrive-chunk-size SizeSuffix Chunk size to upload files with - must be multiple of 320k (327,680 bytes). (default 10Mi) --onedrive-client-id string OAuth Client Id --onedrive-client-secret string OAuth Client Secret --onedrive-drive-id string The ID of the drive to use --onedrive-drive-type string The type of the drive ( personal | business | documentLibrary ) --onedrive-encoding MultiEncoder This sets the encoding for the backend. (default Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,Del,Ctl,LeftSpace,LeftTilde,RightSpace,RightPeriod,InvalidUtf8,Dot) --onedrive-expose-onenote-files Set to make OneNote files show up in directory listings. --onedrive-link-password string Set the password for links created by the link command. --onedrive-link-scope string Set the scope of the links created by the link command. (default "anonymous") --onedrive-link-type string Set the type of the links created by the link command. (default "view") --onedrive-list-chunk int Size of listing chunk. (default 1000) --onedrive-no-versions Remove all versions on modifying operations --onedrive-region string Choose national cloud region for OneDrive. (default "global") --onedrive-server-side-across-configs Allow server-side operations (e.g. copy) to work across different onedrive configs. --onedrive-token string OAuth Access Token as a JSON blob. --onedrive-token-url string Token server url. --opendrive-chunk-size SizeSuffix Files will be uploaded in chunks this size. (default 10Mi) --opendrive-encoding MultiEncoder This sets the encoding for the backend. (default Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,LeftSpace,LeftCrLfHtVt,RightSpace,RightCrLfHtVt,InvalidUtf8,Dot) --opendrive-password string Password. (obscured) --opendrive-username string Username --pcloud-auth-url string Auth server URL. --pcloud-client-id string OAuth Client Id --pcloud-client-secret string OAuth Client Secret --pcloud-encoding MultiEncoder This sets the encoding for the backend. (default Slash,BackSlash,Del,Ctl,InvalidUtf8,Dot) --pcloud-hostname string Hostname to connect to. (default "api.pcloud.com") --pcloud-root-folder-id string Fill in for rclone to use a non root folder as its starting point. (default "d0") --pcloud-token string OAuth Access Token as a JSON blob. --pcloud-token-url string Token server url. --premiumizeme-encoding MultiEncoder This sets the encoding for the backend. (default Slash,DoubleQuote,BackSlash,Del,Ctl,InvalidUtf8,Dot) --putio-encoding MultiEncoder This sets the encoding for the backend. (default Slash,BackSlash,Del,Ctl,InvalidUtf8,Dot) --qingstor-access-key-id string QingStor Access Key ID --qingstor-chunk-size SizeSuffix Chunk size to use for uploading. (default 4Mi) --qingstor-connection-retries int Number of connection retries. (default 3) --qingstor-encoding MultiEncoder This sets the encoding for the backend. (default Slash,Ctl,InvalidUtf8) --qingstor-endpoint string Enter an endpoint URL to connection QingStor API. --qingstor-env-auth Get QingStor credentials from runtime. Only applies if access_key_id and secret_access_key is blank. --qingstor-secret-access-key string QingStor Secret Access Key (password) --qingstor-upload-concurrency int Concurrency for multipart uploads. (default 1) --qingstor-upload-cutoff SizeSuffix Cutoff for switching to chunked upload (default 200Mi) --qingstor-zone string Zone to connect to. --s3-access-key-id string AWS Access Key ID. --s3-acl string Canned ACL used when creating buckets and storing or copying objects. --s3-bucket-acl string Canned ACL used when creating buckets. --s3-chunk-size SizeSuffix Chunk size to use for uploading. (default 5Mi) --s3-copy-cutoff SizeSuffix Cutoff for switching to multipart copy (default 4.656Gi) --s3-disable-checksum Don't store MD5 checksum with object metadata --s3-disable-http2 Disable usage of http2 for S3 backends --s3-encoding MultiEncoder This sets the encoding for the backend. (default Slash,InvalidUtf8,Dot) --s3-endpoint string Endpoint for S3 API. --s3-env-auth Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars). --s3-force-path-style If true use path style access if false use virtual hosted style. (default true) --s3-leave-parts-on-error If true avoid calling abort upload on a failure, leaving all successfully uploaded parts on S3 for manual recovery. --s3-list-chunk int Size of listing chunk (response list for each ListObject S3 request). (default 1000) --s3-location-constraint string Location constraint - must be set to match the Region. --s3-max-upload-parts int Maximum number of parts in a multipart upload. (default 10000) --s3-memory-pool-flush-time Duration How often internal memory buffer pools will be flushed. (default 1m0s) --s3-memory-pool-use-mmap Whether to use mmap buffers in internal memory pool. --s3-no-check-bucket If set, don't attempt to check the bucket exists or create it --s3-no-head If set, don't HEAD uploaded objects to check integrity --s3-no-head-object If set, don't HEAD objects --s3-profile string Profile to use in the shared credentials file --s3-provider string Choose your S3 provider. --s3-region string Region to connect to. --s3-requester-pays Enables requester pays option when interacting with S3 bucket. --s3-secret-access-key string AWS Secret Access Key (password) --s3-server-side-encryption string The server-side encryption algorithm used when storing this object in S3. --s3-session-token string An AWS session token --s3-shared-credentials-file string Path to the shared credentials file --s3-sse-customer-algorithm string If using SSE-C, the server-side encryption algorithm used when storing this object in S3. --s3-sse-customer-key string If using SSE-C you must provide the secret encryption key used to encrypt/decrypt your data. --s3-sse-customer-key-md5 string If using SSE-C you may provide the secret encryption key MD5 checksum (optional). --s3-sse-kms-key-id string If using KMS ID you must provide the ARN of Key. --s3-storage-class string The storage class to use when storing new objects in S3. --s3-upload-concurrency int Concurrency for multipart uploads. (default 4) --s3-upload-cutoff SizeSuffix Cutoff for switching to chunked upload (default 200Mi) --s3-use-accelerate-endpoint If true use the AWS S3 accelerated endpoint. --s3-v2-auth If true use v2 authentication. --seafile-2fa Two-factor authentication ('true' if the account has 2FA enabled) --seafile-create-library Should rclone create a library if it doesn't exist --seafile-encoding MultiEncoder This sets the encoding for the backend. (default Slash,DoubleQuote,BackSlash,Ctl,InvalidUtf8) --seafile-library string Name of the library. Leave blank to access all non-encrypted libraries. --seafile-library-key string Library password (for encrypted libraries only). Leave blank if you pass it through the command line. (obscured) --seafile-pass string Password (obscured) --seafile-url string URL of seafile host to connect to --seafile-user string User name (usually email address) --sftp-ask-password Allow asking for SFTP password when needed. --sftp-disable-concurrent-reads If set don't use concurrent reads --sftp-disable-concurrent-writes If set don't use concurrent writes --sftp-disable-hashcheck Disable the execution of SSH commands to determine if remote file hashing is available. --sftp-host string SSH host to connect to --sftp-idle-timeout Duration Max time before closing idle connections (default 1m0s) --sftp-key-file string Path to PEM-encoded private key file, leave blank or set key-use-agent to use ssh-agent. --sftp-key-file-pass string The passphrase to decrypt the PEM-encoded private key file. (obscured) --sftp-key-pem string Raw PEM-encoded private key, If specified, will override key_file parameter. --sftp-key-use-agent When set forces the usage of the ssh-agent. --sftp-known-hosts-file string Optional path to known_hosts file. --sftp-md5sum-command string The command used to read md5 hashes. Leave blank for autodetect. --sftp-pass string SSH password, leave blank to use ssh-agent. (obscured) --sftp-path-override string Override path used by SSH connection. --sftp-port string SSH port, leave blank to use default (22) --sftp-pubkey-file string Optional path to public key file. --sftp-server-command string Specifies the path or command to run a sftp server on the remote host. --sftp-set-modtime Set the modified time on the remote if set. (default true) --sftp-sha1sum-command string The command used to read sha1 hashes. Leave blank for autodetect. --sftp-skip-links Set to skip any symlinks and any other non regular files. --sftp-subsystem string Specifies the SSH2 subsystem on the remote host. (default "sftp") --sftp-use-fstat If set use fstat instead of stat --sftp-use-insecure-cipher Enable the use of insecure ciphers and key exchange methods. --sftp-user string SSH username, leave blank for current username, $USER --sharefile-chunk-size SizeSuffix Upload chunk size. Must a power of 2 >= 256k. (default 64Mi) --sharefile-encoding MultiEncoder This sets the encoding for the backend. (default Slash,LtGt,DoubleQuote,Colon,Question,Asterisk,Pipe,BackSlash,Ctl,LeftSpace,LeftPeriod,RightSpace,RightPeriod,InvalidUtf8,Dot) --sharefile-endpoint string Endpoint for API calls. --sharefile-root-folder-id string ID of the root folder --sharefile-upload-cutoff SizeSuffix Cutoff for switching to multipart upload. (default 128Mi) --skip-links Don't warn about skipped symlinks. --sugarsync-access-key-id string Sugarsync Access Key ID. --sugarsync-app-id string Sugarsync App ID. --sugarsync-authorization string Sugarsync authorization --sugarsync-authorization-expiry string Sugarsync authorization expiry --sugarsync-deleted-id string Sugarsync deleted folder id --sugarsync-encoding MultiEncoder This sets the encoding for the backend. (default Slash,Ctl,InvalidUtf8,Dot) --sugarsync-hard-delete Permanently delete files if true --sugarsync-private-access-key string Sugarsync Private Access Key --sugarsync-refresh-token string Sugarsync refresh token --sugarsync-root-id string Sugarsync root id --sugarsync-user string Sugarsync user --swift-application-credential-id string Application Credential ID (OS_APPLICATION_CREDENTIAL_ID) --swift-application-credential-name string Application Credential Name (OS_APPLICATION_CREDENTIAL_NAME) --swift-application-credential-secret string Application Credential Secret (OS_APPLICATION_CREDENTIAL_SECRET) --swift-auth string Authentication URL for server (OS_AUTH_URL). --swift-auth-token string Auth Token from alternate authentication - optional (OS_AUTH_TOKEN) --swift-auth-version int AuthVersion - optional - set to (1,2,3) if your auth URL has no version (ST_AUTH_VERSION) --swift-chunk-size SizeSuffix Above this size files will be chunked into a _segments container. (default 5Gi) --swift-domain string User domain - optional (v3 auth) (OS_USER_DOMAIN_NAME) --swift-encoding MultiEncoder This sets the encoding for the backend. (default Slash,InvalidUtf8) --swift-endpoint-type string Endpoint type to choose from the service catalogue (OS_ENDPOINT_TYPE) (default "public") --swift-env-auth Get swift credentials from environment variables in standard OpenStack form. --swift-key string API key or password (OS_PASSWORD). --swift-leave-parts-on-error If true avoid calling abort upload on a failure. It should be set to true for resuming uploads across different sessions. --swift-no-chunk Don't chunk files during streaming upload. --swift-region string Region name - optional (OS_REGION_NAME) --swift-storage-policy string The storage policy to use when creating a new container --swift-storage-url string Storage URL - optional (OS_STORAGE_URL) --swift-tenant string Tenant name - optional for v1 auth, this or tenant_id required otherwise (OS_TENANT_NAME or OS_PROJECT_NAME) --swift-tenant-domain string Tenant domain - optional (v3 auth) (OS_PROJECT_DOMAIN_NAME) --swift-tenant-id string Tenant ID - optional for v1 auth, this or tenant required otherwise (OS_TENANT_ID) --swift-user string User name to log in (OS_USERNAME). --swift-user-id string User ID to log in - optional - most swift systems use user and leave this blank (v3 auth) (OS_USER_ID). --tardigrade-access-grant string Access Grant. --tardigrade-api-key string API Key. --tardigrade-passphrase string Encryption Passphrase. To access existing objects enter passphrase used for uploading. --tardigrade-provider string Choose an authentication method. (default "existing") --tardigrade-satellite-address @
: Satellite Address. Custom satellite address should match the format: @
:. (default "us-central-1.tardigrade.io") --union-action-policy string Policy to choose upstream on ACTION category. (default "epall") --union-cache-time int Cache time of usage and free space (in seconds). This option is only useful when a path preserving policy is used. (default 120) --union-create-policy string Policy to choose upstream on CREATE category. (default "epmfs") --union-search-policy string Policy to choose upstream on SEARCH category. (default "ff") --union-upstreams string List of space separated upstreams. --uptobox-access-token string Your access Token, get it from https://uptobox.com/my_account --uptobox-encoding MultiEncoder This sets the encoding for the backend. (default Slash,LtGt,DoubleQuote,BackQuote,Del,Ctl,LeftSpace,InvalidUtf8,Dot) --webdav-bearer-token string Bearer token instead of user/pass (e.g. a Macaroon) --webdav-bearer-token-command string Command to run to get a bearer token --webdav-encoding string This sets the encoding for the backend. --webdav-headers CommaSepList Set HTTP headers for all transactions --webdav-pass string Password. (obscured) --webdav-url string URL of http host to connect to --webdav-user string User name. In case NTLM authentication is used, the username should be in the format 'Domain\User'. --webdav-vendor string Name of the Webdav site/service/software you are using --yandex-auth-url string Auth server URL. --yandex-client-id string OAuth Client Id --yandex-client-secret string OAuth Client Secret --yandex-encoding MultiEncoder This sets the encoding for the backend. (default Slash,Del,Ctl,InvalidUtf8,Dot) --yandex-token string OAuth Access Token as a JSON blob. --yandex-token-url string Token server url. --zoho-auth-url string Auth server URL. --zoho-client-id string OAuth Client Id --zoho-client-secret string OAuth Client Secret --zoho-encoding MultiEncoder This sets the encoding for the backend. (default Del,Ctl,InvalidUtf8) --zoho-region string Zoho region to connect to. --zoho-token string OAuth Access Token as a JSON blob. --zoho-token-url string Token server url. ```