rclone(1) User Manual Nick Craig-Wood Sep 01, 2018 RCLONE [Logo] Rclone is a command line program to sync files and directories to and from: - Amazon Drive (See note) - Amazon S3 - Backblaze B2 - Box - Ceph - DigitalOcean Spaces - Dreamhost - Dropbox - FTP - Google Cloud Storage - Google Drive - HTTP - Hubic - Jottacloud - IBM COS S3 - Memset Memstore - Mega - Microsoft Azure Blob Storage - Microsoft OneDrive - Minio - Nextcloud - OVH - OpenDrive - Openstack Swift - Oracle Cloud Storage - ownCloud - pCloud - put.io - QingStor - Rackspace Cloud Files - SFTP - Wasabi - WebDAV - Yandex Disk - The local filesystem Features - MD5/SHA1 hashes checked at all times for file integrity - Timestamps preserved on files - Partial syncs supported on a whole file basis - Copy mode to just copy new/changed files - Sync (one way) mode to make a directory identical - Check mode to check for file hash equality - Can sync to and from network, eg two different cloud accounts - Optional encryption (Crypt) - Optional cache (Cache) - Optional FUSE mount (rclone mount) Links - Home page - Github project page for source and bug tracker - Rclone Forum - Google+ page - Downloads INSTALL Rclone is a Go program and comes as a single binary file. Quickstart - Download the relevant binary. - Extract the rclone or rclone.exe binary from the archive - Run rclone config to setup. See rclone config docs for more details. See below for some expanded Linux / macOS instructions. See the Usage section of the docs for how to use rclone, or run rclone -h. Script installation To install rclone on Linux/macOS/BSD systems, run: curl https://rclone.org/install.sh | sudo bash For beta installation, run: curl https://rclone.org/install.sh | sudo bash -s beta Note that this script checks the version of rclone installed first and won't re-download if not needed. Linux installation from precompiled binary Fetch and unpack curl -O https://downloads.rclone.org/rclone-current-linux-amd64.zip unzip rclone-current-linux-amd64.zip cd rclone-*-linux-amd64 Copy binary file sudo cp rclone /usr/bin/ sudo chown root:root /usr/bin/rclone sudo chmod 755 /usr/bin/rclone Install manpage sudo mkdir -p /usr/local/share/man/man1 sudo cp rclone.1 /usr/local/share/man/man1/ sudo mandb Run rclone config to setup. See rclone config docs for more details. rclone config macOS installation from precompiled binary Download the latest version of rclone. cd && curl -O https://downloads.rclone.org/rclone-current-osx-amd64.zip Unzip the download and cd to the extracted folder. unzip -a rclone-current-osx-amd64.zip && cd rclone-*-osx-amd64 Move rclone to your $PATH. You will be prompted for your password. sudo mkdir -p /usr/local/bin sudo mv rclone /usr/local/bin/ (the mkdir command is safe to run, even if the directory already exists). Remove the leftover files. cd .. && rm -rf rclone-*-osx-amd64 rclone-current-osx-amd64.zip Run rclone config to setup. See rclone config docs for more details. rclone config Install from source Make sure you have at least Go 1.7 installed. Download go if necessary. The latest release is recommended. Then git clone https://github.com/ncw/rclone.git cd rclone go build ./rclone version You can also build and install rclone in the GOPATH (which defaults to ~/go) with: go get -u -v github.com/ncw/rclone and this will build the binary in $GOPATH/bin (~/go/bin/rclone by default) after downloading the source to $GOPATH/src/github.com/ncw/rclone (~/go/src/github.com/ncw/rclone by default). Installation with Ansible This can be done with Stefan Weichinger's ansible role. Instructions 1. git clone https://github.com/stefangweichinger/ansible-rclone.git into your local roles-directory 2. add the role to the hosts you want rclone installed to:   - hosts: rclone-hosts roles: - rclone Configure First, you'll need to configure rclone. As the object storage systems have quite complicated authentication these are kept in a config file. (See the --config entry for how to find the config file and choose its location.) The easiest way to make the config is to run rclone with the config option: rclone config See the following for detailed instructions for - Alias - Amazon Drive - Amazon S3 - Backblaze B2 - Box - Cache - Crypt - to encrypt other remotes - DigitalOcean Spaces - Dropbox - FTP - Google Cloud Storage - Google Drive - HTTP - Hubic - Jottacloud - Mega - Microsoft Azure Blob Storage - Microsoft OneDrive - Openstack Swift / Rackspace Cloudfiles / Memset Memstore - OpenDrive - Pcloud - QingStor - SFTP - WebDAV - Yandex Disk - The local filesystem Usage Rclone syncs a directory tree from one storage system to another. Its syntax is like this Syntax: [options] subcommand Source and destination paths are specified by the name you gave the storage system in the config file then the sub path, eg "drive:myfolder" to look at "myfolder" in Google drive. You can define as many storage paths as you like in the config file. Subcommands rclone uses a system of subcommands. For example rclone ls remote:path # lists a re rclone copy /local/path remote:path # copies /local/path to the remote rclone sync /local/path remote:path # syncs /local/path to the remote rclone config Enter an interactive configuration session. Synopsis Enter an interactive configuration session where you can setup new remotes and manage existing ones. You may also set or remove a password to protect your configuration. rclone config [flags] Options -h, --help help for config rclone copy Copy files from source to dest, skipping already copied Synopsis Copy the source to the destination. Doesn't transfer unchanged files, testing by size and modification time or MD5SUM. Doesn't delete files from the destination. Note that it is always the contents of the directory that is synced, not the directory so when source:path is a directory, it's the contents of source:path that are copied, not the directory name and contents. If dest:path doesn't exist, it is created and the source:path contents go there. For example rclone copy source:sourcepath dest:destpath Let's say there are two files in sourcepath sourcepath/one.txt sourcepath/two.txt This copies them to destpath/one.txt destpath/two.txt Not to destpath/sourcepath/one.txt destpath/sourcepath/two.txt If you are familiar with rsync, rclone always works as if you had written a trailing / - meaning "copy the contents of this directory". This applies to all commands and whether you are talking about the source or destination. rclone copy source:path dest:path [flags] Options -h, --help help for copy rclone sync Make source and dest identical, modifying destination only. Synopsis Sync the source to the destination, changing the destination only. Doesn't transfer unchanged files, testing by size and modification time or MD5SUM. Destination is updated to match source, including deleting files if necessary. IMPORTANT: Since this can cause data loss, test first with the --dry-run flag to see exactly what would be copied and deleted. Note that files in the destination won't be deleted if there were any errors at any point. It is always the contents of the directory that is synced, not the directory so when source:path is a directory, it's the contents of source:path that are copied, not the directory name and contents. See extended explanation in the copy command above if unsure. If dest:path doesn't exist, it is created and the source:path contents go there. rclone sync source:path dest:path [flags] Options -h, --help help for sync rclone move Move files from source to dest. Synopsis Moves the contents of the source directory to the destination directory. Rclone will error if the source and destination overlap and the remote does not support a server side directory move operation. If no filters are in use and if possible this will server side move source:path into dest:path. After this source:path will no longer longer exist. Otherwise for each file in source:path selected by the filters (if any) this will move it into dest:path. If possible a server side move will be used, otherwise it will copy it (server side if possible) into dest:path then delete the original (if no errors on copy) in source:path. If you want to delete empty source directories after move, use the --delete-empty-src-dirs flag. IMPORTANT: Since this can cause data loss, test first with the --dry-run flag. rclone move source:path dest:path [flags] Options --delete-empty-src-dirs Delete empty source dirs after move -h, --help help for move rclone delete Remove the contents of path. Synopsis Remove the contents of path. Unlike purge it obeys include/exclude filters so can be used to selectively delete files. Eg delete all files bigger than 100MBytes Check what would be deleted first (use either) rclone --min-size 100M lsl remote:path rclone --dry-run --min-size 100M delete remote:path Then delete rclone --min-size 100M delete remote:path That reads "delete everything with a minimum size of 100 MB", hence delete all files bigger than 100MBytes. rclone delete remote:path [flags] Options -h, --help help for delete rclone purge Remove the path and all of its contents. Synopsis Remove the path and all of its contents. Note that this does not obey include/exclude filters - everything will be removed. Use delete if you want to selectively delete files. rclone purge remote:path [flags] Options -h, --help help for purge rclone mkdir Make the path if it doesn't already exist. Synopsis Make the path if it doesn't already exist. rclone mkdir remote:path [flags] Options -h, --help help for mkdir rclone rmdir Remove the path if empty. Synopsis Remove the path. Note that you can't remove a path with objects in it, use purge for that. rclone rmdir remote:path [flags] Options -h, --help help for rmdir rclone check Checks the files in the source and destination match. Synopsis Checks the files in the source and destination match. It compares sizes and hashes (MD5 or SHA1) and logs a report of files which don't match. It doesn't alter the source or destination. If you supply the --size-only flag, it will only compare the sizes not the hashes as well. Use this for a quick check. If you supply the --download flag, it will download the data from both remotes and check them against each other on the fly. This can be useful for remotes that don't support hashes or if you really want to check all the data. If you supply the --one-way flag, it will only check that files in source match the files in destination, not the other way around. Meaning extra files in destination that are not in the source will not trigger an error. rclone check source:path dest:path [flags] Options --download Check by downloading rather than with hash. -h, --help help for check --one-way Check one way only, source files must exist on remote rclone ls List the objects in the path with size and path. Synopsis Lists the objects in the source path to standard output in a human readable format with size and path. Recurses by default. Eg $ rclone ls swift:bucket 60295 bevajer5jef 90613 canole 94467 diwogej7 37600 fubuwic Any of the filtering options can be applied to this commmand. There are several related list commands - ls to list size and path of objects only - lsl to list modification time, size and path of objects only - lsd to list directories only - lsf to list objects and directories in easy to parse format - lsjson to list objects and directories in JSON format ls,lsl,lsd are designed to be human readable. lsf is designed to be human and machine readable. lsjson is designed to be machine readable. Note that ls and lsl recurse by default - use "--max-depth 1" to stop the recursion. The other list commands lsd,lsf,lsjson do not recurse by default - use "-R" to make them recurse. Listing a non existent directory will produce an error except for remotes which can't have empty directories (eg s3, swift, gcs, etc - the bucket based remotes). rclone ls remote:path [flags] Options -h, --help help for ls rclone lsd List all directories/containers/buckets in the path. Synopsis Lists the directories in the source path to standard output. Does not recurse by default. Use the -R flag to recurse. This command lists the total size of the directory (if known, -1 if not), the modification time (if known, the current time if not), the number of objects in the directory (if known, -1 if not) and the name of the directory, Eg $ rclone lsd swift: 494000 2018-04-26 08:43:20 10000 10000files 65 2018-04-26 08:43:20 1 1File Or $ rclone lsd drive:test -1 2016-10-17 17:41:53 -1 1000files -1 2017-01-03 14:40:54 -1 2500files -1 2017-07-08 14:39:28 -1 4000files If you just want the directory names use "rclone lsf --dirs-only". Any of the filtering options can be applied to this commmand. There are several related list commands - ls to list size and path of objects only - lsl to list modification time, size and path of objects only - lsd to list directories only - lsf to list objects and directories in easy to parse format - lsjson to list objects and directories in JSON format ls,lsl,lsd are designed to be human readable. lsf is designed to be human and machine readable. lsjson is designed to be machine readable. Note that ls and lsl recurse by default - use "--max-depth 1" to stop the recursion. The other list commands lsd,lsf,lsjson do not recurse by default - use "-R" to make them recurse. Listing a non existent directory will produce an error except for remotes which can't have empty directories (eg s3, swift, gcs, etc - the bucket based remotes). rclone lsd remote:path [flags] Options -h, --help help for lsd -R, --recursive Recurse into the listing. rclone lsl List the objects in path with modification time, size and path. Synopsis Lists the objects in the source path to standard output in a human readable format with modification time, size and path. Recurses by default. Eg $ rclone lsl swift:bucket 60295 2016-06-25 18:55:41.062626927 bevajer5jef 90613 2016-06-25 18:55:43.302607074 canole 94467 2016-06-25 18:55:43.046609333 diwogej7 37600 2016-06-25 18:55:40.814629136 fubuwic Any of the filtering options can be applied to this commmand. There are several related list commands - ls to list size and path of objects only - lsl to list modification time, size and path of objects only - lsd to list directories only - lsf to list objects and directories in easy to parse format - lsjson to list objects and directories in JSON format ls,lsl,lsd are designed to be human readable. lsf is designed to be human and machine readable. lsjson is designed to be machine readable. Note that ls and lsl recurse by default - use "--max-depth 1" to stop the recursion. The other list commands lsd,lsf,lsjson do not recurse by default - use "-R" to make them recurse. Listing a non existent directory will produce an error except for remotes which can't have empty directories (eg s3, swift, gcs, etc - the bucket based remotes). rclone lsl remote:path [flags] Options -h, --help help for lsl rclone md5sum Produces an md5sum file for all the objects in the path. Synopsis Produces an md5sum file for all the objects in the path. This is in the same format as the standard md5sum tool produces. rclone md5sum remote:path [flags] Options -h, --help help for md5sum rclone sha1sum Produces an sha1sum file for all the objects in the path. Synopsis Produces an sha1sum file for all the objects in the path. This is in the same format as the standard sha1sum tool produces. rclone sha1sum remote:path [flags] Options -h, --help help for sha1sum rclone size Prints the total size and number of objects in remote:path. Synopsis Prints the total size and number of objects in remote:path. rclone size remote:path [flags] Options -h, --help help for size --json format output as JSON rclone version Show the version number. Synopsis Show the version number, the go version and the architecture. Eg $ rclone version rclone v1.41 - os/arch: linux/amd64 - go version: go1.10 If you supply the --check flag, then it will do an online check to compare your version with the latest release and the latest beta. $ rclone version --check yours: 1.42.0.6 latest: 1.42 (released 2018-06-16) beta: 1.42.0.5 (released 2018-06-17) Or $ rclone version --check yours: 1.41 latest: 1.42 (released 2018-06-16) upgrade: https://downloads.rclone.org/v1.42 beta: 1.42.0.5 (released 2018-06-17) upgrade: https://beta.rclone.org/v1.42-005-g56e1e820 rclone version [flags] Options --check Check for new version. -h, --help help for version rclone cleanup Clean up the remote if possible Synopsis Clean up the remote if possible. Empty the trash or delete old file versions. Not supported by all remotes. rclone cleanup remote:path [flags] Options -h, --help help for cleanup rclone dedupe Interactively find duplicate files and delete/rename them. Synopsis By default dedupe interactively finds duplicate files and offers to delete all but one or rename them to be different. Only useful with Google Drive which can have duplicate file names. In the first pass it will merge directories with the same name. It will do this iteratively until all the identical directories have been merged. The dedupe command will delete all but one of any identical (same md5sum) files it finds without confirmation. This means that for most duplicated files the dedupe command will not be interactive. You can use --dry-run to see what would happen without doing anything. Here is an example run. Before - with duplicates $ rclone lsl drive:dupes 6048320 2016-03-05 16:23:16.798000000 one.txt 6048320 2016-03-05 16:23:11.775000000 one.txt 564374 2016-03-05 16:23:06.731000000 one.txt 6048320 2016-03-05 16:18:26.092000000 one.txt 6048320 2016-03-05 16:22:46.185000000 two.txt 1744073 2016-03-05 16:22:38.104000000 two.txt 564374 2016-03-05 16:22:52.118000000 two.txt Now the dedupe session $ rclone dedupe drive:dupes 2016/03/05 16:24:37 Google drive root 'dupes': Looking for duplicates using interactive mode. one.txt: Found 4 duplicates - deleting identical copies one.txt: Deleting 2/3 identical duplicates (md5sum "1eedaa9fe86fd4b8632e2ac549403b36") one.txt: 2 duplicates remain 1: 6048320 bytes, 2016-03-05 16:23:16.798000000, md5sum 1eedaa9fe86fd4b8632e2ac549403b36 2: 564374 bytes, 2016-03-05 16:23:06.731000000, md5sum 7594e7dc9fc28f727c42ee3e0749de81 s) Skip and do nothing k) Keep just one (choose which in next step) r) Rename all to be different (by changing file.jpg to file-1.jpg) s/k/r> k Enter the number of the file to keep> 1 one.txt: Deleted 1 extra copies two.txt: Found 3 duplicates - deleting identical copies two.txt: 3 duplicates remain 1: 564374 bytes, 2016-03-05 16:22:52.118000000, md5sum 7594e7dc9fc28f727c42ee3e0749de81 2: 6048320 bytes, 2016-03-05 16:22:46.185000000, md5sum 1eedaa9fe86fd4b8632e2ac549403b36 3: 1744073 bytes, 2016-03-05 16:22:38.104000000, md5sum 851957f7fb6f0bc4ce76be966d336802 s) Skip and do nothing k) Keep just one (choose which in next step) r) Rename all to be different (by changing file.jpg to file-1.jpg) s/k/r> r two-1.txt: renamed from: two.txt two-2.txt: renamed from: two.txt two-3.txt: renamed from: two.txt The result being $ rclone lsl drive:dupes 6048320 2016-03-05 16:23:16.798000000 one.txt 564374 2016-03-05 16:22:52.118000000 two-1.txt 6048320 2016-03-05 16:22:46.185000000 two-2.txt 1744073 2016-03-05 16:22:38.104000000 two-3.txt Dedupe can be run non interactively using the --dedupe-mode flag or by using an extra parameter with the same value - --dedupe-mode interactive - interactive as above. - --dedupe-mode skip - removes identical files then skips anything left. - --dedupe-mode first - removes identical files then keeps the first one. - --dedupe-mode newest - removes identical files then keeps the newest one. - --dedupe-mode oldest - removes identical files then keeps the oldest one. - --dedupe-mode largest - removes identical files then keeps the largest one. - --dedupe-mode rename - removes identical files then renames the rest to be different. For example to rename all the identically named photos in your Google Photos directory, do rclone dedupe --dedupe-mode rename "drive:Google Photos" Or rclone dedupe rename "drive:Google Photos" rclone dedupe [mode] remote:path [flags] Options --dedupe-mode string Dedupe mode interactive|skip|first|newest|oldest|rename. (default "interactive") -h, --help help for dedupe rclone about Get quota information from the remote. Synopsis Get quota information from the remote, like bytes used/free/quota and bytes used in the trash. Not supported by all remotes. This will print to stdout something like this: Total: 17G Used: 7.444G Free: 1.315G Trashed: 100.000M Other: 8.241G Where the fields are: - Total: total size available. - Used: total size used - Free: total amount this user could upload. - Trashed: total amount in the trash - Other: total amount in other storage (eg Gmail, Google Photos) - Objects: total number of objects in the storage Note that not all the backends provide all the fields - they will be missing if they are not known for that backend. Where it is known that the value is unlimited the value will also be omitted. Use the --full flag to see the numbers written out in full, eg Total: 18253611008 Used: 7993453766 Free: 1411001220 Trashed: 104857602 Other: 8849156022 Use the --json flag for a computer readable output, eg { "total": 18253611008, "used": 7993453766, "trashed": 104857602, "other": 8849156022, "free": 1411001220 } rclone about remote: [flags] Options --full Full numbers instead of SI units -h, --help help for about --json Format output as JSON rclone authorize Remote authorization. Synopsis Remote authorization. Used to authorize a remote or headless rclone from a machine with a browser - use as instructed by rclone config. rclone authorize [flags] Options -h, --help help for authorize rclone cachestats Print cache stats for a remote Synopsis Print cache stats for a remote in JSON format rclone cachestats source: [flags] Options -h, --help help for cachestats rclone cat Concatenates any files and sends them to stdout. Synopsis rclone cat sends any files to standard output. You can use it like this to output a single file rclone cat remote:path/to/file Or like this to output any file in dir or subdirectories. rclone cat remote:path/to/dir Or like this to output any .txt files in dir or subdirectories. rclone --include "*.txt" cat remote:path/to/dir Use the --head flag to print characters only at the start, --tail for the end and --offset and --count to print a section in the middle. Note that if offset is negative it will count from the end, so --offset -1 --count 1 is equivalent to --tail 1. rclone cat remote:path [flags] Options --count int Only print N characters. (default -1) --discard Discard the output instead of printing. --head int Only print the first N characters. -h, --help help for cat --offset int Start printing at offset N (or from end if -ve). --tail int Only print the last N characters. rclone config create Create a new remote with name, type and options. Synopsis Create a new remote of with and options. The options should be passed in in pairs of . For example to make a swift remote of name myremote using auto config you would do: rclone config create myremote swift env_auth true rclone config create [ ]* [flags] Options -h, --help help for create rclone config delete Delete an existing remote . Synopsis Delete an existing remote . rclone config delete [flags] Options -h, --help help for delete rclone config dump Dump the config file as JSON. Synopsis Dump the config file as JSON. rclone config dump [flags] Options -h, --help help for dump rclone config edit Enter an interactive configuration session. Synopsis Enter an interactive configuration session where you can setup new remotes and manage existing ones. You may also set or remove a password to protect your configuration. rclone config edit [flags] Options -h, --help help for edit rclone config file Show path of configuration file in use. Synopsis Show path of configuration file in use. rclone config file [flags] Options -h, --help help for file rclone config password Update password in an existing remote. Synopsis Update an existing remote's password. The password should be passed in in pairs of . For example to set password of a remote of name myremote you would do: rclone config password myremote fieldname mypassword rclone config password [ ]+ [flags] Options -h, --help help for password rclone config providers List in JSON format all the providers and options. Synopsis List in JSON format all the providers and options. rclone config providers [flags] Options -h, --help help for providers rclone config show Print (decrypted) config file, or the config for a single remote. Synopsis Print (decrypted) config file, or the config for a single remote. rclone config show [] [flags] Options -h, --help help for show rclone config update Update options in an existing remote. Synopsis Update an existing remote's options. The options should be passed in in pairs of . For example to update the env_auth field of a remote of name myremote you would do: rclone config update myremote swift env_auth true rclone config update [ ]+ [flags] Options -h, --help help for update rclone copyto Copy files from source to dest, skipping already copied Synopsis If source:path is a file or directory then it copies it to a file or directory named dest:path. This can be used to upload single files to other than their current name. If the source is a directory then it acts exactly like the copy command. So rclone copyto src dst where src and dst are rclone paths, either remote:path or /path/to/local or C:. This will: if src is file copy it to dst, overwriting an existing file if it exists if src is directory copy it to dst, overwriting existing files if they exist see copy command for full details This doesn't transfer unchanged files, testing by size and modification time or MD5SUM. It doesn't delete files from the destination. rclone copyto source:path dest:path [flags] Options -h, --help help for copyto rclone copyurl Copy url content to dest. Synopsis Download urls content and copy it to destination without saving it in tmp storage. rclone copyurl https://example.com dest:path [flags] Options -h, --help help for copyurl rclone cryptcheck Cryptcheck checks the integrity of a crypted remote. Synopsis rclone cryptcheck checks a remote against a crypted remote. This is the equivalent of running rclone check, but able to check the checksums of the crypted remote. For it to work the underlying remote of the cryptedremote must support some kind of checksum. It works by reading the nonce from each file on the cryptedremote: and using that to encrypt each file on the remote:. It then checks the checksum of the underlying file on the cryptedremote: against the checksum of the file it has just encrypted. Use it like this rclone cryptcheck /path/to/files encryptedremote:path You can use it like this also, but that will involve downloading all the files in remote:path. rclone cryptcheck remote:path encryptedremote:path After it has run it will log the status of the encryptedremote:. If you supply the --one-way flag, it will only check that files in source match the files in destination, not the other way around. Meaning extra files in destination that are not in the source will not trigger an error. rclone cryptcheck remote:path cryptedremote:path [flags] Options -h, --help help for cryptcheck --one-way Check one way only, source files must exist on destination rclone cryptdecode Cryptdecode returns unencrypted file names. Synopsis rclone cryptdecode returns unencrypted file names when provided with a list of encrypted file names. List limit is 10 items. If you supply the --reverse flag, it will return encrypted file names. use it like this rclone cryptdecode encryptedremote: encryptedfilename1 encryptedfilename2 rclone cryptdecode --reverse encryptedremote: filename1 filename2 rclone cryptdecode encryptedremote: encryptedfilename [flags] Options -h, --help help for cryptdecode --reverse Reverse cryptdecode, encrypts filenames rclone dbhashsum Produces a Dropbox hash file for all the objects in the path. Synopsis Produces a Dropbox hash file for all the objects in the path. The hashes are calculated according to Dropbox content hash rules. The output is in the same format as md5sum and sha1sum. rclone dbhashsum remote:path [flags] Options -h, --help help for dbhashsum rclone deletefile Remove a single file from remote. Synopsis Remove a single file from remote. Unlike delete it cannot be used to remove a directory and it doesn't obey include/exclude filters - if the specified file exists, it will always be removed. rclone deletefile remote:path [flags] Options -h, --help help for deletefile rclone genautocomplete Output completion script for a given shell. Synopsis Generates a shell completion script for rclone. Run with --help to list the supported shells. Options -h, --help help for genautocomplete rclone genautocomplete bash Output bash completion script for rclone. Synopsis Generates a bash shell autocompletion script for rclone. This writes to /etc/bash_completion.d/rclone by default so will probably need to be run with sudo or as root, eg sudo rclone genautocomplete bash Logout and login again to use the autocompletion scripts, or source them directly . /etc/bash_completion If you supply a command line argument the script will be written there. rclone genautocomplete bash [output_file] [flags] Options -h, --help help for bash rclone genautocomplete zsh Output zsh completion script for rclone. Synopsis Generates a zsh autocompletion script for rclone. This writes to /usr/share/zsh/vendor-completions/_rclone by default so will probably need to be run with sudo or as root, eg sudo rclone genautocomplete zsh Logout and login again to use the autocompletion scripts, or source them directly autoload -U compinit && compinit If you supply a command line argument the script will be written there. rclone genautocomplete zsh [output_file] [flags] Options -h, --help help for zsh rclone gendocs Output markdown docs for rclone to the directory supplied. Synopsis This produces markdown docs for the rclone commands to the directory supplied. These are in a format suitable for hugo to render into the rclone.org website. rclone gendocs output_directory [flags] Options -h, --help help for gendocs rclone hashsum Produces an hashsum file for all the objects in the path. Synopsis Produces a hash file for all the objects in the path using the hash named. The output is in the same format as the standard md5sum/sha1sum tool. Run without a hash to see the list of supported hashes, eg $ rclone hashsum Supported hashes are: * MD5 * SHA-1 * DropboxHash * QuickXorHash Then $ rclone hashsum MD5 remote:path rclone hashsum remote:path [flags] Options -h, --help help for hashsum rclone link Generate public link to file/folder. Synopsis rclone link will create or retrieve a public link to the given file or folder. rclone link remote:path/to/file rclone link remote:path/to/folder/ If successful, the last line of the output will contain the link. Exact capabilities depend on the remote, but the link will always be created with the least constraints – e.g. no expiry, no password protection, accessible without account. rclone link remote:path [flags] Options -h, --help help for link rclone listremotes List all the remotes in the config file. Synopsis rclone listremotes lists all the available remotes from the config file. When uses with the -l flag it lists the types too. rclone listremotes [flags] Options -h, --help help for listremotes -l, --long Show the type as well as names. rclone lsf List directories and objects in remote:path formatted for parsing Synopsis List the contents of the source path (directories and objects) to standard output in a form which is easy to parse by scripts. By default this will just be the names of the objects and directories, one per line. The directories will have a / suffix. Eg $ rclone lsf swift:bucket bevajer5jef canole diwogej7 ferejej3gux/ fubuwic Use the --format option to control what gets listed. By default this is just the path, but you can use these parameters to control the output: p - path s - size t - modification time h - hash i - ID of object if known m - MimeType of object if known So if you wanted the path, size and modification time, you would use --format "pst", or maybe --format "tsp" to put the path last. Eg $ rclone lsf --format "tsp" swift:bucket 2016-06-25 18:55:41;60295;bevajer5jef 2016-06-25 18:55:43;90613;canole 2016-06-25 18:55:43;94467;diwogej7 2018-04-26 08:50:45;0;ferejej3gux/ 2016-06-25 18:55:40;37600;fubuwic If you specify "h" in the format you will get the MD5 hash by default, use the "--hash" flag to change which hash you want. Note that this can be returned as an empty string if it isn't available on the object (and for directories), "ERROR" if there was an error reading it from the object and "UNSUPPORTED" if that object does not support that hash type. For example to emulate the md5sum command you can use rclone lsf -R --hash MD5 --format hp --separator " " --files-only . Eg $ rclone lsf -R --hash MD5 --format hp --separator " " --files-only swift:bucket 7908e352297f0f530b84a756f188baa3 bevajer5jef cd65ac234e6fea5925974a51cdd865cc canole 03b5341b4f234b9d984d03ad076bae91 diwogej7 8fd37c3810dd660778137ac3a66cc06d fubuwic 99713e14a4c4ff553acaf1930fad985b gixacuh7ku (Though "rclone md5sum ." is an easier way of typing this.) By default the separator is ";" this can be changed with the --separator flag. Note that separators aren't escaped in the path so putting it last is a good strategy. Eg $ rclone lsf --separator "," --format "tshp" swift:bucket 2016-06-25 18:55:41,60295,7908e352297f0f530b84a756f188baa3,bevajer5jef 2016-06-25 18:55:43,90613,cd65ac234e6fea5925974a51cdd865cc,canole 2016-06-25 18:55:43,94467,03b5341b4f234b9d984d03ad076bae91,diwogej7 2018-04-26 08:52:53,0,,ferejej3gux/ 2016-06-25 18:55:40,37600,8fd37c3810dd660778137ac3a66cc06d,fubuwic You can output in CSV standard format. This will escape things in " if they contain , Eg $ rclone lsf --csv --files-only --format ps remote:path test.log,22355 test.sh,449 "this file contains a comma, in the file name.txt",6 Note that the --absolute parameter is useful for making lists of files to pass to an rclone copy with the --files-from flag. For example to find all the files modified within one day and copy those only (without traversing the whole directory structure): rclone lsf --absolute --files-only --max-age 1d /path/to/local > new_files rclone copy --files-from new_files /path/to/local remote:path Any of the filtering options can be applied to this commmand. There are several related list commands - ls to list size and path of objects only - lsl to list modification time, size and path of objects only - lsd to list directories only - lsf to list objects and directories in easy to parse format - lsjson to list objects and directories in JSON format ls,lsl,lsd are designed to be human readable. lsf is designed to be human and machine readable. lsjson is designed to be machine readable. Note that ls and lsl recurse by default - use "--max-depth 1" to stop the recursion. The other list commands lsd,lsf,lsjson do not recurse by default - use "-R" to make them recurse. Listing a non existent directory will produce an error except for remotes which can't have empty directories (eg s3, swift, gcs, etc - the bucket based remotes). rclone lsf remote:path [flags] Options --absolute Put a leading / in front of path names. --csv Output in CSV format. -d, --dir-slash Append a slash to directory names. (default true) --dirs-only Only list directories. --files-only Only list files. -F, --format string Output format - see help for details (default "p") --hash h Use this hash when h is used in the format MD5|SHA-1|DropboxHash (default "MD5") -h, --help help for lsf -R, --recursive Recurse into the listing. -s, --separator string Separator for the items in the format. (default ";") rclone lsjson List directories and objects in the path in JSON format. Synopsis List directories and objects in the path in JSON format. The output is an array of Items, where each Item looks like this { "Hashes" : { "SHA-1" : "f572d396fae9206628714fb2ce00f72e94f2258f", "MD5" : "b1946ac92492d2347c6235b4d2611184", "DropboxHash" : "ecb65bb98f9d905b70458986c39fcbad7715e5f2fcc3b1f07767d7c83e2438cc" }, "ID": "y2djkhiujf83u33", "OrigID": "UYOJVTUW00Q1RzTDA", "IsDir" : false, "MimeType" : "application/octet-stream", "ModTime" : "2017-05-31T16:15:57.034468261+01:00", "Name" : "file.txt", "Encrypted" : "v0qpsdq8anpci8n929v3uu9338", "Path" : "full/path/goes/here/file.txt", "Size" : 6 } If --hash is not specified the Hashes property won't be emitted. If --no-modtime is specified then ModTime will be blank. If --encrypted is not specified the Encrypted won't be emitted. The Path field will only show folders below the remote path being listed. If "remote:path" contains the file "subfolder/file.txt", the Path for "file.txt" will be "subfolder/file.txt", not "remote:path/subfolder/file.txt". When used without --recursive the Path will always be the same as Name. The time is in RFC3339 format with nanosecond precision. The whole output can be processed as a JSON blob, or alternatively it can be processed line by line as each item is written one to a line. Any of the filtering options can be applied to this commmand. There are several related list commands - ls to list size and path of objects only - lsl to list modification time, size and path of objects only - lsd to list directories only - lsf to list objects and directories in easy to parse format - lsjson to list objects and directories in JSON format ls,lsl,lsd are designed to be human readable. lsf is designed to be human and machine readable. lsjson is designed to be machine readable. Note that ls and lsl recurse by default - use "--max-depth 1" to stop the recursion. The other list commands lsd,lsf,lsjson do not recurse by default - use "-R" to make them recurse. Listing a non existent directory will produce an error except for remotes which can't have empty directories (eg s3, swift, gcs, etc - the bucket based remotes). rclone lsjson remote:path [flags] Options -M, --encrypted Show the encrypted names. --hash Include hashes in the output (may take longer). -h, --help help for lsjson --no-modtime Don't read the modification time (can speed things up). --original Show the ID of the underlying Object. -R, --recursive Recurse into the listing. rclone mount Mount the remote as a mountpoint. EXPERIMENTAL Synopsis rclone mount allows Linux, FreeBSD, macOS and Windows to mount any of Rclone's cloud storage systems as a file system with FUSE. This is EXPERIMENTAL - use with care. First set up your remote using rclone config. Check it works with rclone ls etc. Start the mount like this rclone mount remote:path/to/files /path/to/local/mount Or on Windows like this where X: is an unused drive letter rclone mount remote:path/to/files X: When the program ends, either via Ctrl+C or receiving a SIGINT or SIGTERM signal, the mount is automatically stopped. The umount operation can fail, for example when the mountpoint is busy. When that happens, it is the user's responsibility to stop the mount manually with # Linux fusermount -u /path/to/local/mount # OS X umount /path/to/local/mount Installing on Windows To run rclone mount on Windows, you will need to download and install WinFsp. WinFsp is an open source Windows File System Proxy which makes it easy to write user space file systems for Windows. It provides a FUSE emulation layer which rclone uses combination with cgofuse. Both of these packages are by Bill Zissimopoulos who was very helpful during the implementation of rclone mount for Windows. Windows caveats Note that drives created as Administrator are not visible by other accounts (including the account that was elevated as Administrator). So if you start a Windows drive from an Administrative Command Prompt and then try to access the same drive from Explorer (which does not run as Administrator), you will not be able to see the new drive. The easiest way around this is to start the drive from a normal command prompt. It is also possible to start a drive from the SYSTEM account (using the WinFsp.Launcher infrastructure) which creates drives accessible for everyone on the system or alternatively using the nssm service manager. Limitations Without the use of "--vfs-cache-mode" this can only write files sequentially, it can only seek when reading. This means that many applications won't work with their files on an rclone mount without "--vfs-cache-mode writes" or "--vfs-cache-mode full". See the File Caching section for more info. The bucket based remotes (eg Swift, S3, Google Compute Storage, B2, Hubic) won't work from the root - you will need to specify a bucket, or a path within the bucket. So swift: won't work whereas swift:bucket will as will swift:bucket/path. None of these support the concept of directories, so empty directories will have a tendency to disappear once they fall out of the directory cache. Only supported on Linux, FreeBSD, OS X and Windows at the moment. rclone mount vs rclone sync/copy File systems expect things to be 100% reliable, whereas cloud storage systems are a long way from 100% reliable. The rclone sync/copy commands cope with this with lots of retries. However rclone mount can't use retries in the same way without making local copies of the uploads. Look at the EXPERIMENTAL file caching for solutions to make mount mount more reliable. Attribute caching You can use the flag --attr-timeout to set the time the kernel caches the attributes (size, modification time etc) for directory entries. The default is "1s" which caches files just long enough to avoid too many callbacks to rclone from the kernel. In theory 0s should be the correct value for filesystems which can change outside the control of the kernel. However this causes quite a few problems such as rclone using too much memory, rclone not serving files to samba and excessive time listing directories. The kernel can cache the info about a file for the time given by "--attr-timeout". You may see corruption if the remote file changes length during this window. It will show up as either a truncated file or a file with garbage on the end. With "--attr-timeout 1s" this is very unlikely but not impossible. The higher you set "--attr-timeout" the more likely it is. The default setting of "1s" is the lowest setting which mitigates the problems above. If you set it higher ('10s' or '1m' say) then the kernel will call back to rclone less often making it more efficient, however there is more chance of the corruption issue above. If files don't change on the remote outside of the control of rclone then there is no chance of corruption. This is the same as setting the attr_timeout option in mount.fuse. Filters Note that all the rclone filters can be used to select a subset of the files to be visible in the mount. systemd When running rclone mount as a systemd service, it is possible to use Type=notify. In this case the service will enter the started state after the mountpoint has been successfully set up. Units having the rclone mount service specified as a requirement will see all files and folders immediately in this mode. chunked reading --vfs-read-chunk-size will enable reading the source objects in parts. This can reduce the used download quota for some remotes by requesting only chunks from the remote that are actually read at the cost of an increased number of requests. When --vfs-read-chunk-size-limit is also specified and greater than --vfs-read-chunk-size, the chunk size for each open file will get doubled for each chunk read, until the specified value is reached. A value of -1 will disable the limit and the chunk size will grow indefinitely. With --vfs-read-chunk-size 100M and --vfs-read-chunk-size-limit 0 the following parts will be downloaded: 0-100M, 100M-200M, 200M-300M, 300M-400M and so on. When --vfs-read-chunk-size-limit 500M is specified, the result would be 0-100M, 100M-300M, 300M-700M, 700M-1200M, 1200M-1700M and so on. Chunked reading will only work with --vfs-cache-mode < full, as the file will always be copied to the vfs cache before opening with --vfs-cache-mode full. Directory Cache Using the --dir-cache-time flag, you can set how long a directory should be considered up to date and not refreshed from the backend. Changes made locally in the mount may appear immediately or invalidate the cache. However, changes done on the remote will only be picked up once the cache expires. Alternatively, you can send a SIGHUP signal to rclone for it to flush all directory caches, regardless of how old they are. Assuming only one rclone instance is running, you can reset the cache like this: kill -SIGHUP $(pidof rclone) If you configure rclone with a remote control then you can use rclone rc to flush the whole directory cache: rclone rc vfs/forget Or individual files or directories: rclone rc vfs/forget file=path/to/file dir=path/to/dir File Buffering The --buffer-size flag determines the amount of memory, that will be used to buffer data in advance. Each open file descriptor will try to keep the specified amount of data in memory at all times. The buffered data is bound to one file descriptor and won't be shared between multiple open file descriptors of the same file. This flag is a upper limit for the used memory per file descriptor. The buffer will only use memory for data that is downloaded but not not yet read. If the buffer is empty, only a small amount of memory will be used. The maximum memory used by rclone for buffering can be up to --buffer-size * open files. File Caching NB File caching is EXPERIMENTAL - use with care! These flags control the VFS file caching options. The VFS layer is used by rclone mount to make a cloud storage system work more like a normal file system. You'll need to enable VFS caching if you want, for example, to read and write simultaneously to a file. See below for more details. Note that the VFS cache works in addition to the cache backend and you may find that you need one or the other or both. --cache-dir string Directory rclone will use for caching. --vfs-cache-max-age duration Max age of objects in the cache. (default 1h0m0s) --vfs-cache-mode string Cache mode off|minimal|writes|full (default "off") --vfs-cache-poll-interval duration Interval to poll the cache for stale objects. (default 1m0s) If run with -vv rclone will print the location of the file cache. The files are stored in the user cache file area which is OS dependent but can be controlled with --cache-dir or setting the appropriate environment variable. The cache has 4 different modes selected by --vfs-cache-mode. The higher the cache mode the more compatible rclone becomes at the cost of using disk space. Note that files are written back to the remote only when they are closed so if rclone is quit or dies with open files then these won't get written back to the remote. However they will still be in the on disk cache. --vfs-cache-mode off In this mode the cache will read directly from the remote and write directly to the remote without caching anything on disk. This will mean some operations are not possible - Files can't be opened for both read AND write - Files opened for write can't be seeked - Existing files opened for write must have O_TRUNC set - Files open for read with O_TRUNC will be opened write only - Files open for write only will behave as if O_TRUNC was supplied - Open modes O_APPEND, O_TRUNC are ignored - If an upload fails it can't be retried --vfs-cache-mode minimal This is very similar to "off" except that files opened for read AND write will be buffered to disks. This means that files opened for write will be a lot more compatible, but uses the minimal disk space. These operations are not possible - Files opened for write only can't be seeked - Existing files opened for write must have O_TRUNC set - Files opened for write only will ignore O_APPEND, O_TRUNC - If an upload fails it can't be retried --vfs-cache-mode writes In this mode files opened for read only are still read directly from the remote, write only and read/write files are buffered to disk first. This mode should support all normal file system operations. If an upload fails it will be retried up to --low-level-retries times. --vfs-cache-mode full In this mode all reads and writes are buffered to and from disk. When a file is opened for read it will be downloaded in its entirety first. This may be appropriate for your needs, or you may prefer to look at the cache backend which does a much more sophisticated job of caching, including caching directory hierarchies and chunks of files. In this mode, unlike the others, when a file is written to the disk, it will be kept on the disk after it is written to the remote. It will be purged on a schedule according to --vfs-cache-max-age. This mode should support all normal file system operations. If an upload or download fails it will be retried up to --low-level-retries times. rclone mount remote:path /path/to/mountpoint [flags] Options --allow-non-empty Allow mounting over a non-empty directory. --allow-other Allow access to other users. --allow-root Allow access to root user. --attr-timeout duration Time for which file/directory attributes are cached. (default 1s) --daemon Run mount as a daemon (background mode). --daemon-timeout duration Time limit for rclone to respond to kernel (not supported by all OSes). --debug-fuse Debug the FUSE internals - needs -v. --default-permissions Makes kernel enforce access control based on the file mode. --dir-cache-time duration Time to cache directory entries for. (default 5m0s) --fuse-flag stringArray Flags or arguments to be passed direct to libfuse/WinFsp. Repeat if required. --gid uint32 Override the gid field set by the filesystem. (default 502) -h, --help help for mount --max-read-ahead int The number of bytes that can be prefetched for sequential reads. (default 128k) --no-checksum Don't compare checksums on up/download. --no-modtime Don't read/write the modification time (can speed things up). --no-seek Don't allow seeking in files. -o, --option stringArray Option for libfuse/WinFsp. Repeat if required. --poll-interval duration Time to wait between polling for changes. Must be smaller than dir-cache-time. Only on supported remotes. Set to 0 to disable. (default 1m0s) --read-only Mount read-only. --uid uint32 Override the uid field set by the filesystem. (default 502) --umask int Override the permission bits set by the filesystem. --vfs-cache-max-age duration Max age of objects in the cache. (default 1h0m0s) --vfs-cache-mode string Cache mode off|minimal|writes|full (default "off") --vfs-cache-poll-interval duration Interval to poll the cache for stale objects. (default 1m0s) --vfs-read-chunk-size int Read the source objects in chunks. (default 128M) --vfs-read-chunk-size-limit int If greater than --vfs-read-chunk-size, double the chunk size after each chunk read, until the limit is reached. 'off' is unlimited. (default off) --volname string Set the volume name (not supported by all OSes). --write-back-cache Makes kernel buffer writes before sending them to rclone. Without this, writethrough caching is used. rclone moveto Move file or directory from source to dest. Synopsis If source:path is a file or directory then it moves it to a file or directory named dest:path. This can be used to rename files or upload single files to other than their existing name. If the source is a directory then it acts exacty like the move command. So rclone moveto src dst where src and dst are rclone paths, either remote:path or /path/to/local or C:. This will: if src is file move it to dst, overwriting an existing file if it exists if src is directory move it to dst, overwriting existing files if they exist see move command for full details This doesn't transfer unchanged files, testing by size and modification time or MD5SUM. src will be deleted on successful transfer. IMPORTANT: Since this can cause data loss, test first with the --dry-run flag. rclone moveto source:path dest:path [flags] Options -h, --help help for moveto rclone ncdu Explore a remote with a text based user interface. Synopsis This displays a text based user interface allowing the navigation of a remote. It is most useful for answering the question - "What is using all my disk space?". To make the user interface it first scans the entire remote given and builds an in memory representation. rclone ncdu can be used during this scanning phase and you will see it building up the directory structure as it goes along. Here are the keys - press '?' to toggle the help on and off ↑,↓ or k,j to Move →,l to enter ←,h to return c toggle counts g toggle graph n,s,C sort by name,size,count ^L refresh screen ? to toggle help on and off q/ESC/c-C to quit This an homage to the ncdu tool but for rclone remotes. It is missing lots of features at the moment, most importantly deleting files, but is useful as it stands. rclone ncdu remote:path [flags] Options -h, --help help for ncdu rclone obscure Obscure password for use in the rclone.conf Synopsis Obscure password for use in the rclone.conf rclone obscure password [flags] Options -h, --help help for obscure rclone rc Run a command against a running rclone. Synopsis This runs a command against a running rclone. By default it will use that specified in the --rc-addr command. Arguments should be passed in as parameter=value. The result will be returned as a JSON object by default. Use "rclone rc" to see a list of all possible commands. rclone rc commands parameter [flags] Options -h, --help help for rc --no-output If set don't output the JSON result. --url string URL to connect to rclone remote control. (default "http://localhost:5572/") rclone rcat Copies standard input to file on remote. Synopsis rclone rcat reads from standard input (stdin) and copies it to a single remote file. echo "hello world" | rclone rcat remote:path/to/file ffmpeg - | rclone rcat remote:path/to/file If the remote file already exists, it will be overwritten. rcat will try to upload small files in a single request, which is usually more efficient than the streaming/chunked upload endpoints, which use multiple requests. Exact behaviour depends on the remote. What is considered a small file may be set through --streaming-upload-cutoff. Uploading only starts after the cutoff is reached or if the file ends before that. The data must fit into RAM. The cutoff needs to be small enough to adhere the limits of your remote, please see there. Generally speaking, setting this cutoff too high will decrease your performance. Note that the upload can also not be retried because the data is not kept around until the upload succeeds. If you need to transfer a lot of data, you're better off caching locally and then rclone move it to the destination. rclone rcat remote:path [flags] Options -h, --help help for rcat rclone rmdirs Remove empty directories under the path. Synopsis This removes any empty directories (or directories that only contain empty directories) under the path that it finds, including the path if it has nothing in. If you supply the --leave-root flag, it will not remove the root directory. This is useful for tidying up remotes that rclone has left a lot of empty directories in. rclone rmdirs remote:path [flags] Options -h, --help help for rmdirs --leave-root Do not remove root directory if empty rclone serve Serve a remote over a protocol. Synopsis rclone serve is used to serve a remote over a given protocol. This command requires the use of a subcommand to specify the protocol, eg rclone serve http remote: Each subcommand has its own options which you can see in their help. rclone serve [opts] [flags] Options -h, --help help for serve rclone serve http Serve the remote over HTTP. Synopsis rclone serve http implements a basic web server to serve the remote over HTTP. This can be viewed in a web browser or you can make a remote of type http read from it. You can use the filter flags (eg --include, --exclude) to control what is served. The server will log errors. Use -v to see access logs. --bwlimit will be respected for file transfers. Use --stats to control the stats printing. Server options Use --addr to specify which IP address and port the server should listen on, eg --addr 1.2.3.4:8000 or --addr :8080 to listen to all IPs. By default it only listens on localhost. You can use port :0 to let the OS choose an available port. If you set --addr to listen on a public or LAN accessible IP address then using Authentication is advised - see the next section for info. --server-read-timeout and --server-write-timeout can be used to control the timeouts on the server. Note that this is the total time for a transfer. --max-header-bytes controls the maximum number of bytes the server will accept in the HTTP header. Authentication By default this will serve files without needing a login. You can either use an htpasswd file which can take lots of users, or set a single username and password with the --user and --pass flags. Use --htpasswd /path/to/htpasswd to provide an htpasswd file. This is in standard apache format and supports MD5, SHA1 and BCrypt for basic authentication. Bcrypt is recommended. To create an htpasswd file: touch htpasswd htpasswd -B htpasswd user htpasswd -B htpasswd anotherUser The password file can be updated while rclone is running. Use --realm to set the authentication realm. SSL/TLS By default this will serve over http. If you want you can serve over https. You will need to supply the --cert and --key flags. If you wish to do client side certificate validation then you will need to supply --client-ca also. --cert should be a either a PEM encoded certificate or a concatenation of that with the CA certificate. --key should be the PEM encoded private key and --client-ca should be the PEM encoded client certificate authority certificate. Directory Cache Using the --dir-cache-time flag, you can set how long a directory should be considered up to date and not refreshed from the backend. Changes made locally in the mount may appear immediately or invalidate the cache. However, changes done on the remote will only be picked up once the cache expires. Alternatively, you can send a SIGHUP signal to rclone for it to flush all directory caches, regardless of how old they are. Assuming only one rclone instance is running, you can reset the cache like this: kill -SIGHUP $(pidof rclone) If you configure rclone with a remote control then you can use rclone rc to flush the whole directory cache: rclone rc vfs/forget Or individual files or directories: rclone rc vfs/forget file=path/to/file dir=path/to/dir File Buffering The --buffer-size flag determines the amount of memory, that will be used to buffer data in advance. Each open file descriptor will try to keep the specified amount of data in memory at all times. The buffered data is bound to one file descriptor and won't be shared between multiple open file descriptors of the same file. This flag is a upper limit for the used memory per file descriptor. The buffer will only use memory for data that is downloaded but not not yet read. If the buffer is empty, only a small amount of memory will be used. The maximum memory used by rclone for buffering can be up to --buffer-size * open files. File Caching NB File caching is EXPERIMENTAL - use with care! These flags control the VFS file caching options. The VFS layer is used by rclone mount to make a cloud storage system work more like a normal file system. You'll need to enable VFS caching if you want, for example, to read and write simultaneously to a file. See below for more details. Note that the VFS cache works in addition to the cache backend and you may find that you need one or the other or both. --cache-dir string Directory rclone will use for caching. --vfs-cache-max-age duration Max age of objects in the cache. (default 1h0m0s) --vfs-cache-mode string Cache mode off|minimal|writes|full (default "off") --vfs-cache-poll-interval duration Interval to poll the cache for stale objects. (default 1m0s) If run with -vv rclone will print the location of the file cache. The files are stored in the user cache file area which is OS dependent but can be controlled with --cache-dir or setting the appropriate environment variable. The cache has 4 different modes selected by --vfs-cache-mode. The higher the cache mode the more compatible rclone becomes at the cost of using disk space. Note that files are written back to the remote only when they are closed so if rclone is quit or dies with open files then these won't get written back to the remote. However they will still be in the on disk cache. --vfs-cache-mode off In this mode the cache will read directly from the remote and write directly to the remote without caching anything on disk. This will mean some operations are not possible - Files can't be opened for both read AND write - Files opened for write can't be seeked - Existing files opened for write must have O_TRUNC set - Files open for read with O_TRUNC will be opened write only - Files open for write only will behave as if O_TRUNC was supplied - Open modes O_APPEND, O_TRUNC are ignored - If an upload fails it can't be retried --vfs-cache-mode minimal This is very similar to "off" except that files opened for read AND write will be buffered to disks. This means that files opened for write will be a lot more compatible, but uses the minimal disk space. These operations are not possible - Files opened for write only can't be seeked - Existing files opened for write must have O_TRUNC set - Files opened for write only will ignore O_APPEND, O_TRUNC - If an upload fails it can't be retried --vfs-cache-mode writes In this mode files opened for read only are still read directly from the remote, write only and read/write files are buffered to disk first. This mode should support all normal file system operations. If an upload fails it will be retried up to --low-level-retries times. --vfs-cache-mode full In this mode all reads and writes are buffered to and from disk. When a file is opened for read it will be downloaded in its entirety first. This may be appropriate for your needs, or you may prefer to look at the cache backend which does a much more sophisticated job of caching, including caching directory hierarchies and chunks of files. In this mode, unlike the others, when a file is written to the disk, it will be kept on the disk after it is written to the remote. It will be purged on a schedule according to --vfs-cache-max-age. This mode should support all normal file system operations. If an upload or download fails it will be retried up to --low-level-retries times. rclone serve http remote:path [flags] Options --addr string IPaddress:Port or :Port to bind server to. (default "localhost:8080") --cert string SSL PEM key (concatenation of certificate and CA certificate) --client-ca string Client certificate authority to verify clients with --dir-cache-time duration Time to cache directory entries for. (default 5m0s) --gid uint32 Override the gid field set by the filesystem. (default 502) -h, --help help for http --htpasswd string htpasswd file - if not provided no authentication is done --key string SSL PEM Private key --max-header-bytes int Maximum size of request header (default 4096) --no-checksum Don't compare checksums on up/download. --no-modtime Don't read/write the modification time (can speed things up). --no-seek Don't allow seeking in files. --pass string Password for authentication. --poll-interval duration Time to wait between polling for changes. Must be smaller than dir-cache-time. Only on supported remotes. Set to 0 to disable. (default 1m0s) --read-only Mount read-only. --realm string realm for authentication (default "rclone") --server-read-timeout duration Timeout for server reading data (default 1h0m0s) --server-write-timeout duration Timeout for server writing data (default 1h0m0s) --uid uint32 Override the uid field set by the filesystem. (default 502) --umask int Override the permission bits set by the filesystem. (default 2) --user string User name for authentication. --vfs-cache-max-age duration Max age of objects in the cache. (default 1h0m0s) --vfs-cache-mode string Cache mode off|minimal|writes|full (default "off") --vfs-cache-poll-interval duration Interval to poll the cache for stale objects. (default 1m0s) --vfs-read-chunk-size int Read the source objects in chunks. (default 128M) --vfs-read-chunk-size-limit int If greater than --vfs-read-chunk-size, double the chunk size after each chunk read, until the limit is reached. 'off' is unlimited. (default off) rclone serve restic Serve the remote for restic's REST API. Synopsis rclone serve restic implements restic's REST backend API over HTTP. This allows restic to use rclone as a data storage mechanism for cloud providers that restic does not support directly. Restic is a command line program for doing backups. The server will log errors. Use -v to see access logs. --bwlimit will be respected for file transfers. Use --stats to control the stats printing. Setting up rclone for use by restic First set up a remote for your chosen cloud provider. Once you have set up the remote, check it is working with, for example "rclone lsd remote:". You may have called the remote something other than "remote:" - just substitute whatever you called it in the following instructions. Now start the rclone restic server rclone serve restic -v remote:backup Where you can replace "backup" in the above by whatever path in the remote you wish to use. By default this will serve on "localhost:8080" you can change this with use of the "--addr" flag. You might wish to start this server on boot. Setting up restic to use rclone Now you can follow the restic instructions on setting up restic. Note that you will need restic 0.8.2 or later to interoperate with rclone. For the example above you will want to use "http://localhost:8080/" as the URL for the REST server. For example: $ export RESTIC_REPOSITORY=rest:http://localhost:8080/ $ export RESTIC_PASSWORD=yourpassword $ restic init created restic backend 8b1a4b56ae at rest:http://localhost:8080/ Please note that knowledge of your password is required to access the repository. Losing your password means that your data is irrecoverably lost. $ restic backup /path/to/files/to/backup scan [/path/to/files/to/backup] scanned 189 directories, 312 files in 0:00 [0:00] 100.00% 38.128 MiB / 38.128 MiB 501 / 501 items 0 errors ETA 0:00 duration: 0:00 snapshot 45c8fdd8 saved Multiple repositories Note that you can use the endpoint to host multiple repositories. Do this by adding a directory name or path after the URL. Note that these MUST end with /. Eg $ export RESTIC_REPOSITORY=rest:http://localhost:8080/user1repo/ # backup user1 stuff $ export RESTIC_REPOSITORY=rest:http://localhost:8080/user2repo/ # backup user2 stuff Server options Use --addr to specify which IP address and port the server should listen on, eg --addr 1.2.3.4:8000 or --addr :8080 to listen to all IPs. By default it only listens on localhost. You can use port :0 to let the OS choose an available port. If you set --addr to listen on a public or LAN accessible IP address then using Authentication is advised - see the next section for info. --server-read-timeout and --server-write-timeout can be used to control the timeouts on the server. Note that this is the total time for a transfer. --max-header-bytes controls the maximum number of bytes the server will accept in the HTTP header. Authentication By default this will serve files without needing a login. You can either use an htpasswd file which can take lots of users, or set a single username and password with the --user and --pass flags. Use --htpasswd /path/to/htpasswd to provide an htpasswd file. This is in standard apache format and supports MD5, SHA1 and BCrypt for basic authentication. Bcrypt is recommended. To create an htpasswd file: touch htpasswd htpasswd -B htpasswd user htpasswd -B htpasswd anotherUser The password file can be updated while rclone is running. Use --realm to set the authentication realm. SSL/TLS By default this will serve over http. If you want you can serve over https. You will need to supply the --cert and --key flags. If you wish to do client side certificate validation then you will need to supply --client-ca also. --cert should be a either a PEM encoded certificate or a concatenation of that with the CA certificate. --key should be the PEM encoded private key and --client-ca should be the PEM encoded client certificate authority certificate. rclone serve restic remote:path [flags] Options --addr string IPaddress:Port or :Port to bind server to. (default "localhost:8080") --append-only disallow deletion of repository data --cert string SSL PEM key (concatenation of certificate and CA certificate) --client-ca string Client certificate authority to verify clients with -h, --help help for restic --htpasswd string htpasswd file - if not provided no authentication is done --key string SSL PEM Private key --max-header-bytes int Maximum size of request header (default 4096) --pass string Password for authentication. --realm string realm for authentication (default "rclone") --server-read-timeout duration Timeout for server reading data (default 1h0m0s) --server-write-timeout duration Timeout for server writing data (default 1h0m0s) --stdio run an HTTP2 server on stdin/stdout --user string User name for authentication. rclone serve webdav Serve remote:path over webdav. Synopsis rclone serve webdav implements a basic webdav server to serve the remote over HTTP via the webdav protocol. This can be viewed with a webdav client or you can make a remote of type webdav to read and write it. Webdav options --etag-hash This controls the ETag header. Without this flag the ETag will be based on the ModTime and Size of the object. If this flag is set to "auto" then rclone will choose the first supported hash on the backend or you can use a named hash such as "MD5" or "SHA-1". Use "rclone hashsum" to see the full list. Server options Use --addr to specify which IP address and port the server should listen on, eg --addr 1.2.3.4:8000 or --addr :8080 to listen to all IPs. By default it only listens on localhost. You can use port :0 to let the OS choose an available port. If you set --addr to listen on a public or LAN accessible IP address then using Authentication is advised - see the next section for info. --server-read-timeout and --server-write-timeout can be used to control the timeouts on the server. Note that this is the total time for a transfer. --max-header-bytes controls the maximum number of bytes the server will accept in the HTTP header. Authentication By default this will serve files without needing a login. You can either use an htpasswd file which can take lots of users, or set a single username and password with the --user and --pass flags. Use --htpasswd /path/to/htpasswd to provide an htpasswd file. This is in standard apache format and supports MD5, SHA1 and BCrypt for basic authentication. Bcrypt is recommended. To create an htpasswd file: touch htpasswd htpasswd -B htpasswd user htpasswd -B htpasswd anotherUser The password file can be updated while rclone is running. Use --realm to set the authentication realm. SSL/TLS By default this will serve over http. If you want you can serve over https. You will need to supply the --cert and --key flags. If you wish to do client side certificate validation then you will need to supply --client-ca also. --cert should be a either a PEM encoded certificate or a concatenation of that with the CA certificate. --key should be the PEM encoded private key and --client-ca should be the PEM encoded client certificate authority certificate. Directory Cache Using the --dir-cache-time flag, you can set how long a directory should be considered up to date and not refreshed from the backend. Changes made locally in the mount may appear immediately or invalidate the cache. However, changes done on the remote will only be picked up once the cache expires. Alternatively, you can send a SIGHUP signal to rclone for it to flush all directory caches, regardless of how old they are. Assuming only one rclone instance is running, you can reset the cache like this: kill -SIGHUP $(pidof rclone) If you configure rclone with a remote control then you can use rclone rc to flush the whole directory cache: rclone rc vfs/forget Or individual files or directories: rclone rc vfs/forget file=path/to/file dir=path/to/dir File Buffering The --buffer-size flag determines the amount of memory, that will be used to buffer data in advance. Each open file descriptor will try to keep the specified amount of data in memory at all times. The buffered data is bound to one file descriptor and won't be shared between multiple open file descriptors of the same file. This flag is a upper limit for the used memory per file descriptor. The buffer will only use memory for data that is downloaded but not not yet read. If the buffer is empty, only a small amount of memory will be used. The maximum memory used by rclone for buffering can be up to --buffer-size * open files. File Caching NB File caching is EXPERIMENTAL - use with care! These flags control the VFS file caching options. The VFS layer is used by rclone mount to make a cloud storage system work more like a normal file system. You'll need to enable VFS caching if you want, for example, to read and write simultaneously to a file. See below for more details. Note that the VFS cache works in addition to the cache backend and you may find that you need one or the other or both. --cache-dir string Directory rclone will use for caching. --vfs-cache-max-age duration Max age of objects in the cache. (default 1h0m0s) --vfs-cache-mode string Cache mode off|minimal|writes|full (default "off") --vfs-cache-poll-interval duration Interval to poll the cache for stale objects. (default 1m0s) If run with -vv rclone will print the location of the file cache. The files are stored in the user cache file area which is OS dependent but can be controlled with --cache-dir or setting the appropriate environment variable. The cache has 4 different modes selected by --vfs-cache-mode. The higher the cache mode the more compatible rclone becomes at the cost of using disk space. Note that files are written back to the remote only when they are closed so if rclone is quit or dies with open files then these won't get written back to the remote. However they will still be in the on disk cache. --vfs-cache-mode off In this mode the cache will read directly from the remote and write directly to the remote without caching anything on disk. This will mean some operations are not possible - Files can't be opened for both read AND write - Files opened for write can't be seeked - Existing files opened for write must have O_TRUNC set - Files open for read with O_TRUNC will be opened write only - Files open for write only will behave as if O_TRUNC was supplied - Open modes O_APPEND, O_TRUNC are ignored - If an upload fails it can't be retried --vfs-cache-mode minimal This is very similar to "off" except that files opened for read AND write will be buffered to disks. This means that files opened for write will be a lot more compatible, but uses the minimal disk space. These operations are not possible - Files opened for write only can't be seeked - Existing files opened for write must have O_TRUNC set - Files opened for write only will ignore O_APPEND, O_TRUNC - If an upload fails it can't be retried --vfs-cache-mode writes In this mode files opened for read only are still read directly from the remote, write only and read/write files are buffered to disk first. This mode should support all normal file system operations. If an upload fails it will be retried up to --low-level-retries times. --vfs-cache-mode full In this mode all reads and writes are buffered to and from disk. When a file is opened for read it will be downloaded in its entirety first. This may be appropriate for your needs, or you may prefer to look at the cache backend which does a much more sophisticated job of caching, including caching directory hierarchies and chunks of files. In this mode, unlike the others, when a file is written to the disk, it will be kept on the disk after it is written to the remote. It will be purged on a schedule according to --vfs-cache-max-age. This mode should support all normal file system operations. If an upload or download fails it will be retried up to --low-level-retries times. rclone serve webdav remote:path [flags] Options --addr string IPaddress:Port or :Port to bind server to. (default "localhost:8080") --cert string SSL PEM key (concatenation of certificate and CA certificate) --client-ca string Client certificate authority to verify clients with --dir-cache-time duration Time to cache directory entries for. (default 5m0s) --etag-hash string Which hash to use for the ETag, or auto or blank for off --gid uint32 Override the gid field set by the filesystem. (default 502) -h, --help help for webdav --htpasswd string htpasswd file - if not provided no authentication is done --key string SSL PEM Private key --max-header-bytes int Maximum size of request header (default 4096) --no-checksum Don't compare checksums on up/download. --no-modtime Don't read/write the modification time (can speed things up). --no-seek Don't allow seeking in files. --pass string Password for authentication. --poll-interval duration Time to wait between polling for changes. Must be smaller than dir-cache-time. Only on supported remotes. Set to 0 to disable. (default 1m0s) --read-only Mount read-only. --realm string realm for authentication (default "rclone") --server-read-timeout duration Timeout for server reading data (default 1h0m0s) --server-write-timeout duration Timeout for server writing data (default 1h0m0s) --uid uint32 Override the uid field set by the filesystem. (default 502) --umask int Override the permission bits set by the filesystem. (default 2) --user string User name for authentication. --vfs-cache-max-age duration Max age of objects in the cache. (default 1h0m0s) --vfs-cache-mode string Cache mode off|minimal|writes|full (default "off") --vfs-cache-poll-interval duration Interval to poll the cache for stale objects. (default 1m0s) --vfs-read-chunk-size int Read the source objects in chunks. (default 128M) --vfs-read-chunk-size-limit int If greater than --vfs-read-chunk-size, double the chunk size after each chunk read, until the limit is reached. 'off' is unlimited. (default off) rclone touch Create new file or change file modification time. Synopsis Create new file or change file modification time. rclone touch remote:path [flags] Options -h, --help help for touch -C, --no-create Do not create the file if it does not exist. -t, --timestamp string Change the modification times to the specified time instead of the current time of day. The argument is of the form 'YYMMDD' (ex. 17.10.30) or 'YYYY-MM-DDTHH:MM:SS' (ex. 2006-01-02T15:04:05) rclone tree List the contents of the remote in a tree like fashion. Synopsis rclone tree lists the contents of a remote in a similar way to the unix tree command. For example $ rclone tree remote:path / ├── file1 ├── file2 ├── file3 └── subdir ├── file4 └── file5 1 directories, 5 files You can use any of the filtering options with the tree command (eg --include and --exclude). You can also use --fast-list. The tree command has many options for controlling the listing which are compatible with the tree command. Note that not all of them have short options as they conflict with rclone's short options. rclone tree remote:path [flags] Options -a, --all All files are listed (list . files too). -C, --color Turn colorization on always. -d, --dirs-only List directories only. --dirsfirst List directories before files (-U disables). --full-path Print the full path prefix for each file. -h, --help help for tree --human Print the size in a more human readable way. --level int Descend only level directories deep. -D, --modtime Print the date of last modification. -i, --noindent Don't print indentation lines. --noreport Turn off file/directory count at end of tree listing. -o, --output string Output to file instead of stdout. -p, --protections Print the protections for each file. -Q, --quote Quote filenames with double quotes. -s, --size Print the size in bytes of each file. --sort string Select sort: name,version,size,mtime,ctime. --sort-ctime Sort files by last status change time. -t, --sort-modtime Sort files by last modification time. -r, --sort-reverse Reverse the order of the sort. -U, --unsorted Leave files unsorted. --version Sort files alphanumerically by version. Copying single files rclone normally syncs or copies directories. However, if the source remote points to a file, rclone will just copy that file. The destination remote must point to a directory - rclone will give the error Failed to create file system for "remote:file": is a file not a directory if it isn't. For example, suppose you have a remote with a file in called test.jpg, then you could copy just that file like this rclone copy remote:test.jpg /tmp/download The file test.jpg will be placed inside /tmp/download. This is equivalent to specifying rclone copy --files-from /tmp/files remote: /tmp/download Where /tmp/files contains the single line test.jpg It is recommended to use copy when copying individual files, not sync. They have pretty much the same effect but copy will use a lot less memory. Syntax of remote paths The syntax of the paths passed to the rclone command are as follows. /path/to/dir This refers to the local file system. On Windows only \ may be used instead of / in local paths ONLY, non local paths must use /. These paths needn't start with a leading / - if they don't then they will be relative to the current directory. remote:path/to/dir This refers to a directory path/to/dir on remote: as defined in the config file (configured with rclone config). remote:/path/to/dir On most backends this is refers to the same directory as remote:path/to/dir and that format should be preferred. On a very small number of remotes (FTP, SFTP, Dropbox for business) this will refer to a different directory. On these, paths without a leading / will refer to your "home" directory and paths with a leading / will refer to the root. :backend:path/to/dir This is an advanced form for creating remotes on the fly. backend should be the name or prefix of a backend (the type in the config file) and all the configuration for the backend should be provided on the command line (or in environment variables). Eg rclone lsd --http-url https://pub.rclone.org :http: Which lists all the directories in pub.rclone.org. Quoting and the shell When you are typing commands to your computer you are using something called the command line shell. This interprets various characters in an OS specific way. Here are some gotchas which may help users unfamiliar with the shell rules Linux / OSX If your names have spaces or shell metacharacters (eg *, ?, $, ', " etc) then you must quote them. Use single quotes ' by default. rclone copy 'Important files?' remote:backup If you want to send a ' you will need to use ", eg rclone copy "O'Reilly Reviews" remote:backup The rules for quoting metacharacters are complicated and if you want the full details you'll have to consult the manual page for your shell. Windows If your names have spaces in you need to put them in ", eg rclone copy "E:\folder name\folder name\folder name" remote:backup If you are using the root directory on its own then don't quote it (see #464 for why), eg rclone copy E:\ remote:backup Copying files or directories with : in the names rclone uses : to mark a remote name. This is, however, a valid filename component in non-Windows OSes. The remote name parser will only search for a : up to the first / so if you need to act on a file or directory like this then use the full path starting with a /, or use ./ as a current directory prefix. So to sync a directory called sync:me to a remote called remote: use rclone sync ./sync:me remote:path or rclone sync /full/path/to/sync:me remote:path Server Side Copy Most remotes (but not all - see the overview) support server side copy. This means if you want to copy one folder to another then rclone won't download all the files and re-upload them; it will instruct the server to copy them in place. Eg rclone copy s3:oldbucket s3:newbucket Will copy the contents of oldbucket to newbucket without downloading and re-uploading. Remotes which don't support server side copy WILL download and re-upload in this case. Server side copies are used with sync and copy and will be identified in the log when using the -v flag. The move command may also use them if remote doesn't support server side move directly. This is done by issuing a server side copy then a delete which is much quicker than a download and re-upload. Server side copies will only be attempted if the remote names are the same. This can be used when scripting to make aged backups efficiently, eg rclone sync remote:current-backup remote:previous-backup rclone sync /path/to/files remote:current-backup Options Rclone has a number of options to control its behaviour. Options which use TIME use the go time parser. A duration string is a possibly signed sequence of decimal numbers, each with optional fraction and a unit suffix, such as "300ms", "-1.5h" or "2h45m". Valid time units are "ns", "us" (or "µs"), "ms", "s", "m", "h". Options which use SIZE use kByte by default. However, a suffix of b for bytes, k for kBytes, M for MBytes, G for GBytes, T for TBytes and P for PBytes may be used. These are the binary units, eg 1, 2**10, 2**20, 2**30 respectively. --backup-dir=DIR When using sync, copy or move any files which would have been overwritten or deleted are moved in their original hierarchy into this directory. If --suffix is set, then the moved files will have the suffix added to them. If there is a file with the same path (after the suffix has been added) in DIR, then it will be overwritten. The remote in use must support server side move or copy and you must use the same remote as the destination of the sync. The backup directory must not overlap the destination directory. For example rclone sync /path/to/local remote:current --backup-dir remote:old will sync /path/to/local to remote:current, but for any files which would have been updated or deleted will be stored in remote:old. If running rclone from a script you might want to use today's date as the directory name passed to --backup-dir to store the old files, or you might want to pass --suffix with today's date. --bind string Local address to bind to for outgoing connections. This can be an IPv4 address (1.2.3.4), an IPv6 address (1234::789A) or host name. If the host name doesn't resolve or resolves to more than one IP address it will give an error. --bwlimit=BANDWIDTH_SPEC This option controls the bandwidth limit. Limits can be specified in two ways: As a single limit, or as a timetable. Single limits last for the duration of the session. To use a single limit, specify the desired bandwidth in kBytes/s, or use a suffix b|k|M|G. The default is 0 which means to not limit bandwidth. For example, to limit bandwidth usage to 10 MBytes/s use --bwlimit 10M It is also possible to specify a "timetable" of limits, which will cause certain limits to be applied at certain times. To specify a timetable, format your entries as "WEEKDAY-HH:MM,BANDWIDTH WEEKDAY-HH:MM,BANDWIDTH..." where: WEEKDAY is optional element. It could be writen as whole world or only using 3 first characters. HH:MM is an hour from 00:00 to 23:59. An example of a typical timetable to avoid link saturation during daytime working hours could be: --bwlimit "08:00,512 12:00,10M 13:00,512 18:00,30M 23:00,off" In this example, the transfer bandwidth will be every day set to 512kBytes/sec at 8am. At noon, it will raise to 10Mbytes/s, and drop back to 512kBytes/sec at 1pm. At 6pm, the bandwidth limit will be set to 30MBytes/s, and at 11pm it will be completely disabled (full speed). Anything between 11pm and 8am will remain unlimited. An example of timetable with WEEKDAY could be: --bwlimit "Mon-00:00,512 Fri-23:59,10M Sat-10:00,1M Sun-20:00,off" It mean that, the transfer bandwidh will be set to 512kBytes/sec on Monday. It will raise to 10Mbytes/s before the end of Friday. At 10:00 on Sunday it will be set to 1Mbyte/s. From 20:00 at Sunday will be unlimited. Timeslots without weekday are extended to whole week. So this one example: --bwlimit "Mon-00:00,512 12:00,1M Sun-20:00,off" Is equal to this: --bwlimit "Mon-00:00,512Mon-12:00,1M Tue-12:00,1M Wed-12:00,1M Thu-12:00,1M Fri-12:00,1M Sat-12:00,1M Sun-12:00,1M Sun-20:00,off" Bandwidth limits only apply to the data transfer. They don't apply to the bandwidth of the directory listings etc. Note that the units are Bytes/s, not Bits/s. Typically connections are measured in Bits/s - to convert divide by 8. For example, let's say you have a 10 Mbit/s connection and you wish rclone to use half of it - 5 Mbit/s. This is 5/8 = 0.625MByte/s so you would use a --bwlimit 0.625M parameter for rclone. On Unix systems (Linux, MacOS, …) the bandwidth limiter can be toggled by sending a SIGUSR2 signal to rclone. This allows to remove the limitations of a long running rclone transfer and to restore it back to the value specified with --bwlimit quickly when needed. Assuming there is only one rclone instance running, you can toggle the limiter like this: kill -SIGUSR2 $(pidof rclone) If you configure rclone with a remote control then you can use change the bwlimit dynamically: rclone rc core/bwlimit rate=1M --buffer-size=SIZE Use this sized buffer to speed up file transfers. Each --transfer will use this much memory for buffering. When using mount or cmount each open file descriptor will use this much memory for buffering. See the mount documentation for more details. Set to 0 to disable the buffering for the minimum memory usage. --checkers=N The number of checkers to run in parallel. Checkers do the equality checking of files during a sync. For some storage systems (eg S3, Swift, Dropbox) this can take a significant amount of time so they are run in parallel. The default is to run 8 checkers in parallel. -c, --checksum Normally rclone will look at modification time and size of files to see if they are equal. If you set this flag then rclone will check the file hash and size to determine if files are equal. This is useful when the remote doesn't support setting modified time and a more accurate sync is desired than just checking the file size. This is very useful when transferring between remotes which store the same hash type on the object, eg Drive and Swift. For details of which remotes support which hash type see the table in the overview section. Eg rclone --checksum sync s3:/bucket swift:/bucket would run much quicker than without the --checksum flag. When using this flag, rclone won't update mtimes of remote files if they are incorrect as it would normally. --config=CONFIG_FILE Specify the location of the rclone config file. Normally the config file is in your home directory as a file called .config/rclone/rclone.conf (or .rclone.conf if created with an older version). If $XDG_CONFIG_HOME is set it will be at $XDG_CONFIG_HOME/rclone/rclone.conf If you run rclone -h and look at the help for the --config option you will see where the default location is for you. Use this flag to override the config location, eg rclone --config=".myconfig" .config. --contimeout=TIME Set the connection timeout. This should be in go time format which looks like 5s for 5 seconds, 10m for 10 minutes, or 3h30m. The connection timeout is the amount of time rclone will wait for a connection to go through to a remote object storage system. It is 1m by default. --dedupe-mode MODE Mode to run dedupe command in. One of interactive, skip, first, newest, oldest, rename. The default is interactive. See the dedupe command for more information as to what these options mean. --disable FEATURE,FEATURE,... This disables a comma separated list of optional features. For example to disable server side move and server side copy use: --disable move,copy The features can be put in in any case. To see a list of which features can be disabled use: --disable help See the overview features and optional features to get an idea of which feature does what. This flag can be useful for debugging and in exceptional circumstances (eg Google Drive limiting the total volume of Server Side Copies to 100GB/day). -n, --dry-run Do a trial run with no permanent changes. Use this to see what rclone would do without actually doing it. Useful when setting up the sync command which deletes files in the destination. --ignore-checksum Normally rclone will check that the checksums of transferred files match, and give an error "corrupted on transfer" if they don't. You can use this option to skip that check. You should only use it if you have had the "corrupted on transfer" error message and you are sure you might want to transfer potentially corrupted data. --ignore-existing Using this option will make rclone unconditionally skip all files that exist on the destination, no matter the content of these files. While this isn't a generally recommended option, it can be useful in cases where your files change due to encryption. However, it cannot correct partial transfers in case a transfer was interrupted. --ignore-size Normally rclone will look at modification time and size of files to see if they are equal. If you set this flag then rclone will check only the modification time. If --checksum is set then it only checks the checksum. It will also cause rclone to skip verifying the sizes are the same after transfer. This can be useful for transferring files to and from OneDrive which occasionally misreports the size of image files (see #399 for more info). -I, --ignore-times Using this option will cause rclone to unconditionally upload all files regardless of the state of files on the destination. Normally rclone would skip any files that have the same modification time and are the same size (or have the same checksum if using --checksum). --immutable Treat source and destination files as immutable and disallow modification. With this option set, files will be created and deleted as requested, but existing files will never be updated. If an existing file does not match between the source and destination, rclone will give the error Source and destination exist but do not match: immutable file modified. Note that only commands which transfer files (e.g. sync, copy, move) are affected by this behavior, and only modification is disallowed. Files may still be deleted explicitly (e.g. delete, purge) or implicitly (e.g. sync, move). Use copy --immutable if it is desired to avoid deletion as well as modification. This can be useful as an additional layer of protection for immutable or append-only data sets (notably backup archives), where modification implies corruption and should not be propagated. --leave-root During rmdirs it will not remove root directory, even if it's empty. --log-file=FILE Log all of rclone's output to FILE. This is not active by default. This can be useful for tracking down problems with syncs in combination with the -v flag. See the Logging section for more info. Note that if you are using the logrotate program to manage rclone's logs, then you should use the copytruncate option as rclone doesn't have a signal to rotate logs. --log-level LEVEL This sets the log level for rclone. The default log level is NOTICE. DEBUG is equivalent to -vv. It outputs lots of debug info - useful for bug reports and really finding out what rclone is doing. INFO is equivalent to -v. It outputs information about each transfer and prints stats once a minute by default. NOTICE is the default log level if no logging flags are supplied. It outputs very little when things are working normally. It outputs warnings and significant events. ERROR is equivalent to -q. It only outputs error messages. --low-level-retries NUMBER This controls the number of low level retries rclone does. A low level retry is used to retry a failing operation - typically one HTTP request. This might be uploading a chunk of a big file for example. You will see low level retries in the log with the -v flag. This shouldn't need to be changed from the default in normal operations. However, if you get a lot of low level retries you may wish to reduce the value so rclone moves on to a high level retry (see the --retries flag) quicker. Disable low level retries with --low-level-retries 1. --max-backlog=N This is the maximum allowable backlog of files in a sync/copy/move queued for being checked or transferred. This can be set arbitrarily large. It will only use memory when the queue is in use. Note that it will use in the order of N kB of memory when the backlog is in use. Setting this large allows rclone to calculate how many files are pending more accurately and give a more accurate estimated finish time. Setting this small will make rclone more synchronous to the listings of the remote which may be desirable. --max-delete=N This tells rclone not to delete more than N files. If that limit is exceeded then a fatal error will be generated and rclone will stop the operation in progress. --max-depth=N This modifies the recursion depth for all the commands except purge. So if you do rclone --max-depth 1 ls remote:path you will see only the files in the top level directory. Using --max-depth 2 means you will see all the files in first two directory levels and so on. For historical reasons the lsd command defaults to using a --max-depth of 1 - you can override this with the command line flag. You can use this command to disable recursion (with --max-depth 1). Note that if you use this with sync and --delete-excluded the files not recursed through are considered excluded and will be deleted on the destination. Test first with --dry-run if you are not sure what will happen. --max-transfer=SIZE Rclone will stop transferring when it has reached the size specified. Defaults to off. When the limit is reached all transfers will stop immediately. Rclone will exit with exit code 8 if the transfer limit is reached. --modify-window=TIME When checking whether a file has been modified, this is the maximum allowed time difference that a file can have and still be considered equivalent. The default is 1ns unless this is overridden by a remote. For example OS X only stores modification times to the nearest second so if you are reading and writing to an OS X filing system this will be 1s by default. This command line flag allows you to override that computed default. --no-gzip-encoding Don't set Accept-Encoding: gzip. This means that rclone won't ask the server for compressed files automatically. Useful if you've set the server to return files with Content-Encoding: gzip but you uploaded compressed files. There is no need to set this in normal operation, and doing so will decrease the network transfer efficiency of rclone. --no-update-modtime When using this flag, rclone won't update modification times of remote files if they are incorrect as it would normally. This can be used if the remote is being synced with another tool also (eg the Google Drive client). --P, --progress This flag makes rclone update the stats in a static block in the terminal providing a realtime overview of the transfer. Any log messages will scroll above the static block. Log messages will push the static block down to the bottom of the terminal where it will stay. Normally this is updated every 500mS but this period can be overridden with the --stats flag. This can be used with the --stats-one-line flag for a simpler display. -q, --quiet Normally rclone outputs stats and a completion message. If you set this flag it will make as little output as possible. --retries int Retry the entire sync if it fails this many times it fails (default 3). Some remotes can be unreliable and a few retries help pick up the files which didn't get transferred because of errors. Disable retries with --retries 1. --retries-sleep=TIME This sets the interval between each retry specified by --retries The default is 0. Use 0 to disable. --size-only Normally rclone will look at modification time and size of files to see if they are equal. If you set this flag then rclone will check only the size. This can be useful transferring files from Dropbox which have been modified by the desktop sync client which doesn't set checksums of modification times in the same way as rclone. --stats=TIME Commands which transfer data (sync, copy, copyto, move, moveto) will print data transfer stats at regular intervals to show their progress. This sets the interval. The default is 1m. Use 0 to disable. If you set the stats interval then all commands can show stats. This can be useful when running other commands, check or mount for example. Stats are logged at INFO level by default which means they won't show at default log level NOTICE. Use --stats-log-level NOTICE or -v to make them show. See the Logging section for more info on log levels. Note that on macOS you can send a SIGINFO (which is normally ctrl-T in the terminal) to make the stats print immediately. --stats-file-name-length integer By default, the --stats output will truncate file names and paths longer than 40 characters. This is equivalent to providing --stats-file-name-length 40. Use --stats-file-name-length 0 to disable any truncation of file names printed by stats. --stats-log-level string Log level to show --stats output at. This can be DEBUG, INFO, NOTICE, or ERROR. The default is INFO. This means at the default level of logging which is NOTICE the stats won't show - if you want them to then use --stats-log-level NOTICE. See the Logging section for more info on log levels. --stats-one-line When this is specified, rclone condenses the stats into a single line showing the most important stats only. --stats-unit=bits|bytes By default, data transfer rates will be printed in bytes/second. This option allows the data rate to be printed in bits/second. Data transfer volume will still be reported in bytes. The rate is reported as a binary unit, not SI unit. So 1 Mbit/s equals 1,048,576 bits/s and not 1,000,000 bits/s. The default is bytes. --suffix=SUFFIX This is for use with --backup-dir only. If this isn't set then --backup-dir will move files with their original name. If it is set then the files will have SUFFIX added on to them. See --backup-dir for more info. --syslog On capable OSes (not Windows or Plan9) send all log output to syslog. This can be useful for running rclone in a script or rclone mount. --syslog-facility string If using --syslog this sets the syslog facility (eg KERN, USER). See man syslog for a list of possible facilities. The default facility is DAEMON. --tpslimit float Limit HTTP transactions per second to this. Default is 0 which is used to mean unlimited transactions per second. For example to limit rclone to 10 HTTP transactions per second use --tpslimit 10, or to 1 transaction every 2 seconds use --tpslimit 0.5. Use this when the number of transactions per second from rclone is causing a problem with the cloud storage provider (eg getting you banned or rate limited). This can be very useful for rclone mount to control the behaviour of applications using it. See also --tpslimit-burst. --tpslimit-burst int Max burst of transactions for --tpslimit. (default 1) Normally --tpslimit will do exactly the number of transaction per second specified. However if you supply --tps-burst then rclone can save up some transactions from when it was idle giving a burst of up to the parameter supplied. For example if you provide --tpslimit-burst 10 then if rclone has been idle for more than 10*--tpslimit then it can do 10 transactions very quickly before they are limited again. This may be used to increase performance of --tpslimit without changing the long term average number of transactions per second. --track-renames By default, rclone doesn't keep track of renamed files, so if you rename a file locally then sync it to a remote, rclone will delete the old file on the remote and upload a new copy. If you use this flag, and the remote supports server side copy or server side move, and the source and destination have a compatible hash, then this will track renames during sync operations and perform renaming server-side. Files will be matched by size and hash - if both match then a rename will be considered. If the destination does not support server-side copy or move, rclone will fall back to the default behaviour and log an error level message to the console. Note that --track-renames uses extra memory to keep track of all the rename candidates. Note also that --track-renames is incompatible with --delete-before and will select --delete-after instead of --delete-during. --delete-(before,during,after) This option allows you to specify when files on your destination are deleted when you sync folders. Specifying the value --delete-before will delete all files present on the destination, but not on the source _before_ starting the transfer of any new or updated files. This uses two passes through the file systems, one for the deletions and one for the copies. Specifying --delete-during will delete files while checking and uploading files. This is the fastest option and uses the least memory. Specifying --delete-after (the default value) will delay deletion of files until all new/updated files have been successfully transferred. The files to be deleted are collected in the copy pass then deleted after the copy pass has completed successfully. The files to be deleted are held in memory so this mode may use more memory. This is the safest mode as it will only delete files if there have been no errors subsequent to that. If there have been errors before the deletions start then you will get the message not deleting files as there were IO errors. --fast-list When doing anything which involves a directory listing (eg sync, copy, ls - in fact nearly every command), rclone normally lists a directory and processes it before using more directory lists to process any subdirectories. This can be parallelised and works very quickly using the least amount of memory. However, some remotes have a way of listing all files beneath a directory in one (or a small number) of transactions. These tend to be the bucket based remotes (eg S3, B2, GCS, Swift, Hubic). If you use the --fast-list flag then rclone will use this method for listing directories. This will have the following consequences for the listing: - It WILL use fewer transactions (important if you pay for them) - It WILL use more memory. Rclone has to load the whole listing into memory. - It _may_ be faster because it uses fewer transactions - It _may_ be slower because it can't be parallelized rclone should always give identical results with and without --fast-list. If you pay for transactions and can fit your entire sync listing into memory then --fast-list is recommended. If you have a very big sync to do then don't use --fast-list otherwise you will run out of memory. If you use --fast-list on a remote which doesn't support it, then rclone will just ignore it. --timeout=TIME This sets the IO idle timeout. If a transfer has started but then becomes idle for this long it is considered broken and disconnected. The default is 5m. Set to 0 to disable. --transfers=N The number of file transfers to run in parallel. It can sometimes be useful to set this to a smaller number if the remote is giving a lot of timeouts or bigger if you have lots of bandwidth and a fast remote. The default is to run 4 file transfers in parallel. -u, --update This forces rclone to skip any files which exist on the destination and have a modified time that is newer than the source file. If an existing destination file has a modification time equal (within the computed modify window precision) to the source file's, it will be updated if the sizes are different. On remotes which don't support mod time directly the time checked will be the uploaded time. This means that if uploading to one of these remotes, rclone will skip any files which exist on the destination and have an uploaded time that is newer than the modification time of the source file. This can be useful when transferring to a remote which doesn't support mod times directly as it is more accurate than a --size-only check and faster than using --checksum. --use-server-modtime Some object-store backends (e.g, Swift, S3) do not preserve file modification times (modtime). On these backends, rclone stores the original modtime as additional metadata on the object. By default it will make an API call to retrieve the metadata when the modtime is needed by an operation. Use this flag to disable the extra API call and rely instead on the server's modified time. In cases such as a local to remote sync, knowing the local file is newer than the time it was last uploaded to the remote is sufficient. In those cases, this flag can speed up the process and reduce the number of API calls necessary. -v, -vv, --verbose With -v rclone will tell you about each file that is transferred and a small number of significant events. With -vv rclone will become very verbose telling you about every file it considers and transfers. Please send bug reports with a log with this setting. -V, --version Prints the version number Configuration Encryption Your configuration file contains information for logging in to your cloud services. This means that you should keep your .rclone.conf file in a secure location. If you are in an environment where that isn't possible, you can add a password to your configuration. This means that you will have to enter the password every time you start rclone. To add a password to your rclone configuration, execute rclone config. >rclone config Current remotes: e) Edit existing remote n) New remote d) Delete remote s) Set configuration password q) Quit config e/n/d/s/q> Go into s, Set configuration password: e/n/d/s/q> s Your configuration is not encrypted. If you add a password, you will protect your login information to cloud services. a) Add Password q) Quit to main menu a/q> a Enter NEW configuration password: password: Confirm NEW password: password: Password set Your configuration is encrypted. c) Change Password u) Unencrypt configuration q) Quit to main menu c/u/q> Your configuration is now encrypted, and every time you start rclone you will now be asked for the password. In the same menu, you can change the password or completely remove encryption from your configuration. There is no way to recover the configuration if you lose your password. rclone uses nacl secretbox which in turn uses XSalsa20 and Poly1305 to encrypt and authenticate your configuration with secret-key cryptography. The password is SHA-256 hashed, which produces the key for secretbox. The hashed password is not stored. While this provides very good security, we do not recommend storing your encrypted rclone configuration in public if it contains sensitive information, maybe except if you use a very strong password. If it is safe in your environment, you can set the RCLONE_CONFIG_PASS environment variable to contain your password, in which case it will be used for decrypting the configuration. You can set this for a session from a script. For unix like systems save this to a file called set-rclone-password: #!/bin/echo Source this file don't run it read -s RCLONE_CONFIG_PASS export RCLONE_CONFIG_PASS Then source the file when you want to use it. From the shell you would do source set-rclone-password. It will then ask you for the password and set it in the environment variable. If you are running rclone inside a script, you might want to disable password prompts. To do that, pass the parameter --ask-password=false to rclone. This will make rclone fail instead of asking for a password if RCLONE_CONFIG_PASS doesn't contain a valid password. Developer options These options are useful when developing or debugging rclone. There are also some more remote specific options which aren't documented here which are used for testing. These start with remote name eg --drive-test-option - see the docs for the remote in question. --cpuprofile=FILE Write CPU profile to file. This can be analysed with go tool pprof. --dump flag,flag,flag The --dump flag takes a comma separated list of flags to dump info about. These are: --dump headers Dump HTTP headers with Authorization: lines removed. May still contain sensitive info. Can be very verbose. Useful for debugging only. Use --dump auth if you do want the Authorization: headers. --dump bodies Dump HTTP headers and bodies - may contain sensitive info. Can be very verbose. Useful for debugging only. Note that the bodies are buffered in memory so don't use this for enormous files. --dump requests Like --dump bodies but dumps the request bodies and the response headers. Useful for debugging download problems. --dump responses Like --dump bodies but dumps the response bodies and the request headers. Useful for debugging upload problems. --dump auth Dump HTTP headers - will contain sensitive info such as Authorization: headers - use --dump headers to dump without Authorization: headers. Can be very verbose. Useful for debugging only. --dump filters Dump the filters to the output. Useful to see exactly what include and exclude options are filtering on. --dump goroutines This dumps a list of the running go-routines at the end of the command to standard output. --dump openfiles This dumps a list of the open files at the end of the command. It uses the lsof command to do that so you'll need that installed to use it. --memprofile=FILE Write memory profile to file. This can be analysed with go tool pprof. --no-check-certificate=true/false --no-check-certificate controls whether a client verifies the server's certificate chain and host name. If --no-check-certificate is true, TLS accepts any certificate presented by the server and any host name in that certificate. In this mode, TLS is susceptible to man-in-the-middle attacks. This option defaults to false. THIS SHOULD BE USED ONLY FOR TESTING. Filtering For the filtering options - --delete-excluded - --filter - --filter-from - --exclude - --exclude-from - --include - --include-from - --files-from - --min-size - --max-size - --min-age - --max-age - --dump filters See the filtering section. Remote control For the remote control options and for instructions on how to remote control rclone - --rc - and anything starting with --rc- See the remote control section. Logging rclone has 4 levels of logging, ERROR, NOTICE, INFO and DEBUG. By default, rclone logs to standard error. This means you can redirect standard error and still see the normal output of rclone commands (eg rclone ls). By default, rclone will produce Error and Notice level messages. If you use the -q flag, rclone will only produce Error messages. If you use the -v flag, rclone will produce Error, Notice and Info messages. If you use the -vv flag, rclone will produce Error, Notice, Info and Debug messages. You can also control the log levels with the --log-level flag. If you use the --log-file=FILE option, rclone will redirect Error, Info and Debug messages along with standard error to FILE. If you use the --syslog flag then rclone will log to syslog and the --syslog-facility control which facility it uses. Rclone prefixes all log messages with their level in capitals, eg INFO which makes it easy to grep the log file for different kinds of information. Exit Code If any errors occur during the command execution, rclone will exit with a non-zero exit code. This allows scripts to detect when rclone operations have failed. During the startup phase, rclone will exit immediately if an error is detected in the configuration. There will always be a log message immediately before exiting. When rclone is running it will accumulate errors as it goes along, and only exit with a non-zero exit code if (after retries) there were still failed transfers. For every error counted there will be a high priority log message (visible with -q) showing the message and which file caused the problem. A high priority message is also shown when starting a retry so the user can see that any previous error messages may not be valid after the retry. If rclone has done a retry it will log a high priority message if the retry was successful. List of exit codes - 0 - success - 1 - Syntax or usage error - 2 - Error not otherwise categorised - 3 - Directory not found - 4 - File not found - 5 - Temporary error (one that more retries might fix) (Retry errors) - 6 - Less serious errors (like 461 errors from dropbox) (NoRetry errors) - 7 - Fatal error (one that more retries won't fix, like account suspended) (Fatal errors) - 8 - Transfer exceeded - limit set by --max-transfer reached Environment Variables Rclone can be configured entirely using environment variables. These can be used to set defaults for options or config file entries. Options Every option in rclone can have its default set by environment variable. To find the name of the environment variable, first, take the long option name, strip the leading --, change - to _, make upper case and prepend RCLONE_. For example, to always set --stats 5s, set the environment variable RCLONE_STATS=5s. If you set stats on the command line this will override the environment variable setting. Or to always use the trash in drive --drive-use-trash, set RCLONE_DRIVE_USE_TRASH=true. The same parser is used for the options and the environment variables so they take exactly the same form. Config file You can set defaults for values in the config file on an individual remote basis. If you want to use this feature, you will need to discover the name of the config items that you want. The easiest way is to run through rclone config by hand, then look in the config file to see what the values are (the config file can be found by looking at the help for --config in rclone help). To find the name of the environment variable, you need to set, take RCLONE_CONFIG_ + name of remote + _ + name of config file option and make it all uppercase. For example, to configure an S3 remote named mys3: without a config file (using unix ways of setting environment variables): $ export RCLONE_CONFIG_MYS3_TYPE=s3 $ export RCLONE_CONFIG_MYS3_ACCESS_KEY_ID=XXX $ export RCLONE_CONFIG_MYS3_SECRET_ACCESS_KEY=XXX $ rclone lsd MYS3: -1 2016-09-21 12:54:21 -1 my-bucket $ rclone listremotes | grep mys3 mys3: Note that if you want to create a remote using environment variables you must create the ..._TYPE variable as above. Other environment variables - RCLONE_CONFIG_PASS` set to contain your config file password (see Configuration Encryption section) - HTTP_PROXY, HTTPS_PROXY and NO_PROXY (or the lowercase versions thereof). - HTTPS_PROXY takes precedence over HTTP_PROXY for https requests. - The environment values may be either a complete URL or a "host[:port]" for, in which case the "http" scheme is assumed. CONFIGURING RCLONE ON A REMOTE / HEADLESS MACHINE Some of the configurations (those involving oauth2) require an Internet connected web browser. If you are trying to set rclone up on a remote or headless box with no browser available on it (eg a NAS or a server in a datacenter) then you will need to use an alternative means of configuration. There are two ways of doing it, described below. Configuring using rclone authorize On the headless box ... Remote config Use auto config? * Say Y if not sure * Say N if you are working on a remote or headless machine y) Yes n) No y/n> n For this to work, you will need rclone available on a machine that has a web browser available. Execute the following on your machine: rclone authorize "amazon cloud drive" Then paste the result below: result> Then on your main desktop machine rclone authorize "amazon cloud drive" If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth Log in and authorize rclone for access Waiting for code... Got code Paste the following into your remote machine ---> SECRET_TOKEN <---End paste Then back to the headless box, paste in the code result> SECRET_TOKEN -------------------- [acd12] client_id = client_secret = token = SECRET_TOKEN -------------------- y) Yes this is OK e) Edit this remote d) Delete this remote y/e/d> Configuring by copying the config file Rclone stores all of its config in a single configuration file. This can easily be copied to configure a remote rclone. So first configure rclone on your desktop machine rclone config to set up the config file. Find the config file by running rclone -h and looking for the help for the --config option $ rclone -h [snip] --config="/home/user/.rclone.conf": Config file. [snip] Now transfer it to the remote box (scp, cut paste, ftp, sftp etc) and place it in the correct place (use rclone -h on the remote box to find out where). FILTERING, INCLUDES AND EXCLUDES Rclone has a sophisticated set of include and exclude rules. Some of these are based on patterns and some on other things like file size. The filters are applied for the copy, sync, move, ls, lsl, md5sum, sha1sum, size, delete and check operations. Note that purge does not obey the filters. Each path as it passes through rclone is matched against the include and exclude rules like --include, --exclude, --include-from, --exclude-from, --filter, or --filter-from. The simplest way to try them out is using the ls command, or --dry-run together with -v. Patterns The patterns used to match files for inclusion or exclusion are based on "file globs" as used by the unix shell. If the pattern starts with a / then it only matches at the top level of the directory tree, RELATIVE TO THE ROOT OF THE REMOTE (not necessarily the root of the local drive). If it doesn't start with / then it is matched starting at the END OF THE PATH, but it will only match a complete path element: file.jpg - matches "file.jpg" - matches "directory/file.jpg" - doesn't match "afile.jpg" - doesn't match "directory/afile.jpg" /file.jpg - matches "file.jpg" in the root directory of the remote - doesn't match "afile.jpg" - doesn't match "directory/file.jpg" IMPORTANT Note that you must use / in patterns and not \ even if running on Windows. A * matches anything but not a /. *.jpg - matches "file.jpg" - matches "directory/file.jpg" - doesn't match "file.jpg/something" Use ** to match anything, including slashes (/). dir/** - matches "dir/file.jpg" - matches "dir/dir1/dir2/file.jpg" - doesn't match "directory/file.jpg" - doesn't match "adir/file.jpg" A ? matches any character except a slash /. l?ss - matches "less" - matches "lass" - doesn't match "floss" A [ and ] together make a a character class, such as [a-z] or [aeiou] or [[:alpha:]]. See the go regexp docs for more info on these. h[ae]llo - matches "hello" - matches "hallo" - doesn't match "hullo" A { and } define a choice between elements. It should contain a comma separated list of patterns, any of which might match. These patterns can contain wildcards. {one,two}_potato - matches "one_potato" - matches "two_potato" - doesn't match "three_potato" - doesn't match "_potato" Special characters can be escaped with a \ before them. \*.jpg - matches "*.jpg" \\.jpg - matches "\.jpg" \[one\].jpg - matches "[one].jpg" Note also that rclone filter globs can only be used in one of the filter command line flags, not in the specification of the remote, so rclone copy "remote:dir*.jpg" /path/to/dir won't work - what is required is rclone --include "*.jpg" copy remote:dir /path/to/dir Directories Rclone keeps track of directories that could match any file patterns. Eg if you add the include rule /a/*.jpg Rclone will synthesize the directory include rule /a/ If you put any rules which end in / then it will only match directories. Directory matches are ONLY used to optimise directory access patterns - you must still match the files that you want to match. Directory matches won't optimise anything on bucket based remotes (eg s3, swift, google compute storage, b2) which don't have a concept of directory. Differences between rsync and rclone patterns Rclone implements bash style {a,b,c} glob matching which rsync doesn't. Rclone always does a wildcard match so \ must always escape a \. How the rules are used Rclone maintains a combined list of include rules and exclude rules. Each file is matched in order, starting from the top, against the rule in the list until it finds a match. The file is then included or excluded according to the rule type. If the matcher fails to find a match after testing against all the entries in the list then the path is included. For example given the following rules, + being include, - being exclude, - secret*.jpg + *.jpg + *.png + file2.avi - * This would include - file1.jpg - file3.png - file2.avi This would exclude - secret17.jpg - non *.jpg and *.png A similar process is done on directory entries before recursing into them. This only works on remotes which have a concept of directory (Eg local, google drive, onedrive, amazon drive) and not on bucket based remotes (eg s3, swift, google compute storage, b2). Adding filtering rules Filtering rules are added with the following command line flags. Repeating options You can repeat the following options to add more than one rule of that type. - --include - --include-from - --exclude - --exclude-from - --filter - --filter-from IMPORTANT You should not use --include* together with --exclude*. It may produce different results than you expected. In that case try to use: --filter*. Note that all the options of the same type are processed together in the order above, regardless of what order they were placed on the command line. So all --include options are processed first in the order they appeared on the command line, then all --include-from options etc. To mix up the order includes and excludes, the --filter flag can be used. --exclude - Exclude files matching pattern Add a single exclude rule with --exclude. This flag can be repeated. See above for the order the flags are processed in. Eg --exclude *.bak to exclude all bak files from the sync. --exclude-from - Read exclude patterns from file Add exclude rules from a file. This flag can be repeated. See above for the order the flags are processed in. Prepare a file like this exclude-file.txt # a sample exclude rule file *.bak file2.jpg Then use as --exclude-from exclude-file.txt. This will sync all files except those ending in bak and file2.jpg. This is useful if you have a lot of rules. --include - Include files matching pattern Add a single include rule with --include. This flag can be repeated. See above for the order the flags are processed in. Eg --include *.{png,jpg} to include all png and jpg files in the backup and no others. This adds an implicit --exclude * at the very end of the filter list. This means you can mix --include and --include-from with the other filters (eg --exclude) but you must include all the files you want in the include statement. If this doesn't provide enough flexibility then you must use --filter-from. --include-from - Read include patterns from file Add include rules from a file. This flag can be repeated. See above for the order the flags are processed in. Prepare a file like this include-file.txt # a sample include rule file *.jpg *.png file2.avi Then use as --include-from include-file.txt. This will sync all jpg, png files and file2.avi. This is useful if you have a lot of rules. This adds an implicit --exclude * at the very end of the filter list. This means you can mix --include and --include-from with the other filters (eg --exclude) but you must include all the files you want in the include statement. If this doesn't provide enough flexibility then you must use --filter-from. --filter - Add a file-filtering rule This can be used to add a single include or exclude rule. Include rules start with + and exclude rules start with -. A special rule called ! can be used to clear the existing rules. This flag can be repeated. See above for the order the flags are processed in. Eg --filter "- *.bak" to exclude all bak files from the sync. --filter-from - Read filtering patterns from a file Add include/exclude rules from a file. This flag can be repeated. See above for the order the flags are processed in. Prepare a file like this filter-file.txt # a sample filter rule file - secret*.jpg + *.jpg + *.png + file2.avi - /dir/Trash/** + /dir/** # exclude everything else - * Then use as --filter-from filter-file.txt. The rules are processed in the order that they are defined. This example will include all jpg and png files, exclude any files matching secret*.jpg and include file2.avi. It will also include everything in the directory dir at the root of the sync, except dir/Trash which it will exclude. Everything else will be excluded from the sync. --files-from - Read list of source-file names This reads a list of file names from the file passed in and ONLY these files are transferred. The FILTERING RULES ARE IGNORED completely if you use this option. This option can be repeated to read from more than one file. These are read in the order that they are placed on the command line. Paths within the --files-from file will be interpreted as starting with the root specified in the command. Leading / characters are ignored. For example, suppose you had files-from.txt with this content: # comment file1.jpg subdir/file2.jpg You could then use it like this: rclone copy --files-from files-from.txt /home/me/pics remote:pics This will transfer these files only (if they exist) /home/me/pics/file1.jpg → remote:pics/file1.jpg /home/me/pics/subdir/file2.jpg → remote:pics/subdirfile1.jpg To take a more complicated example, let's say you had a few files you want to back up regularly with these absolute paths: /home/user1/important /home/user1/dir/file /home/user2/stuff To copy these you'd find a common subdirectory - in this case /home and put the remaining files in files-from.txt with or without leading /, eg user1/important user1/dir/file user2/stuff You could then copy these to a remote like this rclone copy --files-from files-from.txt /home remote:backup The 3 files will arrive in remote:backup with the paths as in the files-from.txt like this: /home/user1/important → remote:backup/user1/important /home/user1/dir/file → remote:backup/user1/dir/file /home/user2/stuff → remote:backup/stuff You could of course choose / as the root too in which case your files-from.txt might look like this. /home/user1/important /home/user1/dir/file /home/user2/stuff And you would transfer it like this rclone copy --files-from files-from.txt / remote:backup In this case there will be an extra home directory on the remote: /home/user1/important → remote:home/backup/user1/important /home/user1/dir/file → remote:home/backup/user1/dir/file /home/user2/stuff → remote:home/backup/stuff --min-size - Don't transfer any file smaller than this This option controls the minimum size file which will be transferred. This defaults to kBytes but a suffix of k, M, or G can be used. For example --min-size 50k means no files smaller than 50kByte will be transferred. --max-size - Don't transfer any file larger than this This option controls the maximum size file which will be transferred. This defaults to kBytes but a suffix of k, M, or G can be used. For example --max-size 1G means no files larger than 1GByte will be transferred. --max-age - Don't transfer any file older than this This option controls the maximum age of files to transfer. Give in seconds or with a suffix of: - ms - Milliseconds - s - Seconds - m - Minutes - h - Hours - d - Days - w - Weeks - M - Months - y - Years For example --max-age 2d means no files older than 2 days will be transferred. --min-age - Don't transfer any file younger than this This option controls the minimum age of files to transfer. Give in seconds or with a suffix (see --max-age for list of suffixes) For example --min-age 2d means no files younger than 2 days will be transferred. --delete-excluded - Delete files on dest excluded from sync IMPORTANT this flag is dangerous - use with --dry-run and -v first. When doing rclone sync this will delete any files which are excluded from the sync on the destination. If for example you did a sync from A to B without the --min-size 50k flag rclone sync A: B: Then you repeated it like this with the --delete-excluded rclone --min-size 50k --delete-excluded sync A: B: This would delete all files on B which are less than 50 kBytes as these are now excluded from the sync. Always test first with --dry-run and -v before using this flag. --dump filters - dump the filters to the output This dumps the defined filters to the output as regular expressions. Useful for debugging. Quoting shell metacharacters The examples above may not work verbatim in your shell as they have shell metacharacters in them (eg *), and may require quoting. Eg linux, OSX - --include \*.jpg - --include '*.jpg' - --include='*.jpg' In Windows the expansion is done by the command not the shell so this should work fine - --include *.jpg Exclude directory based on a file It is possible to exclude a directory based on a file, which is present in this directory. Filename should be specified using the --exclude-if-present flag. This flag has a priority over the other filtering flags. Imagine, you have the following directory structure: dir1/file1 dir1/dir2/file2 dir1/dir2/dir3/file3 dir1/dir2/dir3/.ignore You can exclude dir3 from sync by running the following command: rclone sync --exclude-if-present .ignore dir1 remote:backup Currently only one filename is supported, i.e. --exclude-if-present should not be used multiple times. REMOTE CONTROLLING RCLONE If rclone is run with the --rc flag then it starts an http server which can be used to remote control rclone. NB this is experimental and everything here is subject to change! Supported parameters --rc Flag to start the http server listen on remote requests --rc-addr=IP IPaddress:Port or :Port to bind server to. (default "localhost:5572") --rc-cert=KEY SSL PEM key (concatenation of certificate and CA certificate) --rc-client-ca=PATH Client certificate authority to verify clients with --rc-htpasswd=PATH htpasswd file - if not provided no authentication is done --rc-key=PATH SSL PEM Private key --rc-max-header-bytes=VALUE Maximum size of request header (default 4096) --rc-user=VALUE User name for authentication. --rc-pass=VALUE Password for authentication. --rc-realm=VALUE Realm for authentication (default "rclone") --rc-server-read-timeout=DURATION Timeout for server reading data (default 1h0m0s) --rc-server-write-timeout=DURATION Timeout for server writing data (default 1h0m0s) Accessing the remote control via the rclone rc command Rclone itself implements the remote control protocol in its rclone rc command. You can use it like this $ rclone rc rc/noop param1=one param2=two { "param1": "one", "param2": "two" } Run rclone rc on its own to see the help for the installed remote control commands. Supported commands cache/expire: Purge a remote from cache Purge a remote from the cache backend. Supports either a directory or a file. Params: - remote = path to remote (required) - withData = true/false to delete cached data (chunks) as well (optional) Eg rclone rc cache/expire remote=path/to/sub/folder/ rclone rc cache/expire remote=/ withData=true cache/stats: Get cache stats Show statistics for the cache remote. core/bwlimit: Set the bandwidth limit. This sets the bandwidth limit to that passed in. Eg rclone rc core/bwlimit rate=1M rclone rc core/bwlimit rate=off The format of the parameter is exactly the same as passed to --bwlimit except only one bandwidth may be specified. core/gc: Runs a garbage collection. This tells the go runtime to do a garbage collection run. It isn't necessary to call this normally, but it can be useful for debugging memory problems. core/memstats: Returns the memory statistics This returns the memory statistics of the running program. What the values mean are explained in the go docs: https://golang.org/pkg/runtime/#MemStats The most interesting values for most people are: - HeapAlloc: This is the amount of memory rclone is actually using - HeapSys: This is the amount of memory rclone has obtained from the OS - Sys: this is the total amount of memory requested from the OS - It is virtual memory so may include unused memory core/pid: Return PID of current process This returns PID of current process. Useful for stopping rclone process. core/stats: Returns stats about current transfers. This returns all available stats rclone rc core/stats Returns the following values: { "speed": average speed in bytes/sec since start of the process, "bytes": total transferred bytes since the start of the process, "errors": number of errors, "checks": number of checked files, "transfers": number of transferred files, "deletes" : number of deleted files, "elapsedTime": time in seconds since the start of the process, "lastError": last occurred error, "transferring": an array of currently active file transfers: [ { "bytes": total transferred bytes for this file, "eta": estimated time in seconds until file transfer completion "name": name of the file, "percentage": progress of the file transfer in percent, "speed": speed in bytes/sec, "speedAvg": speed in bytes/sec as an exponentially weighted moving average, "size": size of the file in bytes } ], "checking": an array of names of currently active file checks [] } Values for "transferring", "checking" and "lastError" are only assigned if data is available. The value for "eta" is null if an eta cannot be determined. rc/error: This returns an error This returns an error with the input as part of its error string. Useful for testing error handling. rc/list: List all the registered remote control commands This lists all the registered remote control commands as a JSON map in the commands response. rc/noop: Echo the input to the output parameters This echoes the input parameters to the output parameters for testing purposes. It can be used to check that rclone is still alive and to check that parameter passing is working properly. vfs/forget: Forget files or directories in the directory cache. This forgets the paths in the directory cache causing them to be re-read from the remote when needed. If no paths are passed in then it will forget all the paths in the directory cache. rclone rc vfs/forget Otherwise pass files or dirs in as file=path or dir=path. Any parameter key starting with file will forget that file and any starting with dir will forget that dir, eg rclone rc vfs/forget file=hello file2=goodbye dir=home/junk vfs/refresh: Refresh the directory cache. This reads the directories for the specified paths and freshens the directory cache. If no paths are passed in then it will refresh the root directory. rclone rc vfs/refresh Otherwise pass directories in as dir=path. Any parameter key starting with dir will refresh that directory, eg rclone rc vfs/refresh dir=home/junk dir2=data/misc If the parameter recursive=true is given the whole directory tree will get refreshed. This refresh will use --fast-list if enabled. Accessing the remote control via HTTP Rclone implements a simple HTTP based protocol. Each endpoint takes an JSON object and returns a JSON object or an error. The JSON objects are essentially a map of string names to values. All calls must made using POST. The input objects can be supplied using URL parameters, POST parameters or by supplying "Content-Type: application/json" and a JSON blob in the body. There are examples of these below using curl. The response will be a JSON blob in the body of the response. This is formatted to be reasonably human readable. If an error occurs then there will be an HTTP error status (usually 400) and the body of the response will contain a JSON encoded error object. Using POST with URL parameters only curl -X POST 'http://localhost:5572/rc/noop/?potato=1&sausage=2' Response { "potato": "1", "sausage": "2" } Here is what an error response looks like: curl -X POST 'http://localhost:5572/rc/error/?potato=1&sausage=2' { "error": "arbitrary error on input map[potato:1 sausage:2]", "input": { "potato": "1", "sausage": "2" } } Note that curl doesn't return errors to the shell unless you use the -f option $ curl -f -X POST 'http://localhost:5572/rc/error/?potato=1&sausage=2' curl: (22) The requested URL returned error: 400 Bad Request $ echo $? 22 Using POST with a form curl --data "potato=1" --data "sausage=2" http://localhost:5572/rc/noop/ Response { "potato": "1", "sausage": "2" } Note that you can combine these with URL parameters too with the POST parameters taking precedence. curl --data "potato=1" --data "sausage=2" "http://localhost:5572/rc/noop/?rutabaga=3&sausage=4" Response { "potato": "1", "rutabaga": "3", "sausage": "4" } Using POST with a JSON blob curl -H "Content-Type: application/json" -X POST -d '{"potato":2,"sausage":1}' http://localhost:5572/rc/noop/ response { "password": "xyz", "username": "xyz" } This can be combined with URL parameters too if required. The JSON blob takes precedence. curl -H "Content-Type: application/json" -X POST -d '{"potato":2,"sausage":1}' 'http://localhost:5572/rc/noop/?rutabaga=3&potato=4' { "potato": 2, "rutabaga": "3", "sausage": 1 } Debugging rclone with pprof If you use the --rc flag this will also enable the use of the go profiling tools on the same port. To use these, first install go. Then (for example) to profile rclone's memory use you can run: go tool pprof -web http://localhost:5572/debug/pprof/heap This should open a page in your browser showing what is using what memory. You can also use the -text flag to produce a textual summary $ go tool pprof -text http://localhost:5572/debug/pprof/heap Showing nodes accounting for 1537.03kB, 100% of 1537.03kB total flat flat% sum% cum cum% 1024.03kB 66.62% 66.62% 1024.03kB 66.62% github.com/ncw/rclone/vendor/golang.org/x/net/http2/hpack.addDecoderNode 513kB 33.38% 100% 513kB 33.38% net/http.newBufioWriterSize 0 0% 100% 1024.03kB 66.62% github.com/ncw/rclone/cmd/all.init 0 0% 100% 1024.03kB 66.62% github.com/ncw/rclone/cmd/serve.init 0 0% 100% 1024.03kB 66.62% github.com/ncw/rclone/cmd/serve/restic.init 0 0% 100% 1024.03kB 66.62% github.com/ncw/rclone/vendor/golang.org/x/net/http2.init 0 0% 100% 1024.03kB 66.62% github.com/ncw/rclone/vendor/golang.org/x/net/http2/hpack.init 0 0% 100% 1024.03kB 66.62% github.com/ncw/rclone/vendor/golang.org/x/net/http2/hpack.init.0 0 0% 100% 1024.03kB 66.62% main.init 0 0% 100% 513kB 33.38% net/http.(*conn).readRequest 0 0% 100% 513kB 33.38% net/http.(*conn).serve 0 0% 100% 1024.03kB 66.62% runtime.main Possible profiles to look at: - Memory: go tool pprof http://localhost:5572/debug/pprof/heap - 30-second CPU profile: go tool pprof http://localhost:5572/debug/pprof/profile - 5-second execution trace: wget http://localhost:5572/debug/pprof/trace?seconds=5 See the net/http/pprof docs for more info on how to use the profiling and for a general overview see the Go team's blog post on profiling go programs. The profiling hook is zero overhead unless it is used. OVERVIEW OF CLOUD STORAGE SYSTEMS Each cloud storage system is slightly different. Rclone attempts to provide a unified interface to them, but some underlying differences show through. Features Here is an overview of the major features of each cloud storage system. Name Hash ModTime Case Insensitive Duplicate Files MIME Type ------------------------------ ------------- --------- ------------------ ----------------- ----------- Amazon Drive MD5 No Yes No R Amazon S3 MD5 Yes No No R/W Backblaze B2 SHA1 Yes No No R/W Box SHA1 Yes Yes No - Dropbox DBHASH † Yes Yes No - FTP - No No No - Google Cloud Storage MD5 Yes No No R/W Google Drive MD5 Yes No Yes R/W HTTP - No No No R Hubic MD5 Yes No No R/W Jottacloud MD5 Yes Yes No R/W Mega - No No Yes - Microsoft Azure Blob Storage MD5 Yes No No R/W Microsoft OneDrive SHA1 ‡‡ Yes Yes No R OpenDrive MD5 Yes Yes No - Openstack Swift MD5 Yes No No R/W pCloud MD5, SHA1 Yes No No W QingStor MD5 No No No R/W SFTP MD5, SHA1 ‡ Yes Depends No - WebDAV - Yes †† Depends No - Yandex Disk MD5 Yes No No R/W The local filesystem All Yes Depends No - Hash The cloud storage system supports various hash types of the objects. The hashes are used when transferring data as an integrity check and can be specifically used with the --checksum flag in syncs and in the check command. To use the verify checksums when transferring between cloud storage systems they must support a common hash type. † Note that Dropbox supports its own custom hash. This is an SHA256 sum of all the 4MB block SHA256s. ‡ SFTP supports checksums if the same login has shell access and md5sum or sha1sum as well as echo are in the remote's PATH. †† WebDAV supports modtimes when used with Owncloud and Nextcloud only. ‡‡ Microsoft OneDrive Personal supports SHA1 hashes, whereas OneDrive for business and SharePoint server support Microsoft's own QuickXorHash. ModTime The cloud storage system supports setting modification times on objects. If it does then this enables a using the modification times as part of the sync. If not then only the size will be checked by default, though the MD5SUM can be checked with the --checksum flag. All cloud storage systems support some kind of date on the object and these will be set when transferring from the cloud storage system. Case Insensitive If a cloud storage systems is case sensitive then it is possible to have two files which differ only in case, eg file.txt and FILE.txt. If a cloud storage system is case insensitive then that isn't possible. This can cause problems when syncing between a case insensitive system and a case sensitive system. The symptom of this is that no matter how many times you run the sync it never completes fully. The local filesystem and SFTP may or may not be case sensitive depending on OS. - Windows - usually case insensitive, though case is preserved - OSX - usually case insensitive, though it is possible to format case sensitive - Linux - usually case sensitive, but there are case insensitive file systems (eg FAT formatted USB keys) Most of the time this doesn't cause any problems as people tend to avoid files whose name differs only by case even on case sensitive systems. Duplicate files If a cloud storage system allows duplicate files then it can have two objects with the same name. This confuses rclone greatly when syncing - use the rclone dedupe command to rename or remove duplicates. MIME Type MIME types (also known as media types) classify types of documents using a simple text classification, eg text/html or application/pdf. Some cloud storage systems support reading (R) the MIME type of objects and some support writing (W) the MIME type of objects. The MIME type can be important if you are serving files directly to HTTP from the storage system. If you are copying from a remote which supports reading (R) to a remote which supports writing (W) then rclone will preserve the MIME types. Otherwise they will be guessed from the extension, or the remote itself may assign the MIME type. Optional Features All the remotes support a basic set of features, but there are some optional features supported by some remotes used to make some operations more efficient. Name Purge Copy Move DirMove CleanUp ListR StreamUpload LinkSharing About ------------------------------ ------- ------ ------ --------- --------- ------- -------------- ------------- ------- Amazon Drive Yes No Yes Yes No #575 No No No #2178 No Amazon S3 No Yes No No No Yes Yes No #2178 No Backblaze B2 No No No No Yes Yes Yes No #2178 No Box Yes Yes Yes Yes No #575 No Yes No #2178 No Dropbox Yes Yes Yes Yes No #575 No Yes Yes Yes FTP No No Yes Yes No No Yes No #2178 No Google Cloud Storage Yes Yes No No No Yes Yes No #2178 No Google Drive Yes Yes Yes Yes Yes Yes Yes Yes Yes HTTP No No No No No No No No #2178 No Hubic Yes † Yes No No No Yes Yes No #2178 Yes Jottacloud Yes Yes Yes Yes No No No No No Mega Yes No Yes Yes No No No No #2178 Yes Microsoft Azure Blob Storage Yes Yes No No No Yes No No #2178 No Microsoft OneDrive Yes Yes Yes Yes No #575 No No No #2178 Yes OpenDrive Yes Yes Yes Yes No No No No No Openstack Swift Yes † Yes No No No Yes Yes No #2178 Yes pCloud Yes Yes Yes Yes Yes No No No #2178 Yes QingStor No Yes No No No Yes No No #2178 No SFTP No No Yes Yes No No Yes No #2178 No WebDAV Yes Yes Yes Yes No No Yes ‡ No #2178 No Yandex Disk Yes No No No Yes Yes Yes No #2178 No The local filesystem Yes No Yes Yes No No Yes No Yes Purge This deletes a directory quicker than just deleting all the files in the directory. † Note Swift and Hubic implement this in order to delete directory markers but they don't actually have a quicker way of deleting files other than deleting them individually. ‡ StreamUpload is not supported with Nextcloud Copy Used when copying an object to and from the same remote. This known as a server side copy so you can copy a file without downloading it and uploading it again. It is used if you use rclone copy or rclone move if the remote doesn't support Move directly. If the server doesn't support Copy directly then for copy operations the file is downloaded then re-uploaded. Move Used when moving/renaming an object on the same remote. This is known as a server side move of a file. This is used in rclone move if the server doesn't support DirMove. If the server isn't capable of Move then rclone simulates it with Copy then delete. If the server doesn't support Copy then rclone will download the file and re-upload it. DirMove This is used to implement rclone move to move a directory if possible. If it isn't then it will use Move on each file (which falls back to Copy then download and upload - see Move section). CleanUp This is used for emptying the trash for a remote by rclone cleanup. If the server can't do CleanUp then rclone cleanup will return an error. ListR The remote supports a recursive list to list all the contents beneath a directory quickly. This enables the --fast-list flag to work. See the rclone docs for more details. StreamUpload Some remotes allow files to be uploaded without knowing the file size in advance. This allows certain operations to work without spooling the file to local disk first, e.g. rclone rcat. LinkSharing Sets the necessary permissions on a file or folder and prints a link that allows others to access them, even if they don't have an account on the particular cloud provider. About This is used to fetch quota information from the remote, like bytes used/free/quota and bytes used in the trash. If the server can't do About then rclone about will return an error. Alias The alias remote provides a new name for another remote. Paths may be as deep as required or a local path, eg remote:directory/subdirectory or /directory/subdirectory. During the initial setup with rclone config you will specify the target remote. The target remote can either be a local path or another remote. Subfolders can be used in target remote. Asume a alias remote named backup with the target mydrive:private/backup. Invoking rclone mkdir backup:desktop is exactly the same as invoking rclone mkdir mydrive:private/backup/desktop. There will be no special handling of paths containing .. segments. Invoking rclone mkdir backup:../desktop is exactly the same as invoking rclone mkdir mydrive:private/backup/../desktop. The empty path is not allowed as a remote. To alias the current directory use . instead. Here is an example of how to make a alias called remote for local folder. First run: rclone config This will guide you through an interactive setup process: No remotes found - make a new one n) New remote s) Set configuration password q) Quit config n/s/q> n name> remote Type of storage to configure. Choose a number from below, or type in your own value 1 / Alias for a existing remote \ "alias" 2 / Amazon Drive \ "amazon cloud drive" 3 / Amazon S3 (also Dreamhost, Ceph, Minio) \ "s3" 4 / Backblaze B2 \ "b2" 5 / Box \ "box" 6 / Cache a remote \ "cache" 7 / Dropbox \ "dropbox" 8 / Encrypt/Decrypt a remote \ "crypt" 9 / FTP Connection \ "ftp" 10 / Google Cloud Storage (this is not Google Drive) \ "google cloud storage" 11 / Google Drive \ "drive" 12 / Hubic \ "hubic" 13 / Local Disk \ "local" 14 / Microsoft Azure Blob Storage \ "azureblob" 15 / Microsoft OneDrive \ "onedrive" 16 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH) \ "swift" 17 / Pcloud \ "pcloud" 18 / QingCloud Object Storage \ "qingstor" 19 / SSH/SFTP Connection \ "sftp" 20 / Webdav \ "webdav" 21 / Yandex Disk \ "yandex" 22 / http Connection \ "http" Storage> 1 Remote or path to alias. Can be "myremote:path/to/dir", "myremote:bucket", "myremote:" or "/local/path". remote> /mnt/storage/backup Remote config -------------------- [remote] remote = /mnt/storage/backup -------------------- y) Yes this is OK e) Edit this remote d) Delete this remote y/e/d> y Current remotes: Name Type ==== ==== remote alias e) Edit existing remote n) New remote d) Delete remote r) Rename remote c) Copy remote s) Set configuration password q) Quit config e/n/d/r/c/s/q> q Once configured you can then use rclone like this, List directories in top level in /mnt/storage/backup rclone lsd remote: List all the files in /mnt/storage/backup rclone ls remote: Copy another local directory to the alias directory called source rclone copy /home/source remote:source Amazon Drive Amazon Drive, formerly known as Amazon Cloud Drive, is a cloud storage service run by Amazon for consumers. Status IMPORTANT: rclone supports Amazon Drive only if you have your own set of API keys. Unfortunately the Amazon Drive developer program is now closed to new entries so if you don't already have your own set of keys you will not be able to use rclone with Amazon Drive. For the history on why rclone no longer has a set of Amazon Drive API keys see the forum. If you happen to know anyone who works at Amazon then please ask them to re-instate rclone into the Amazon Drive developer program - thanks! Setup The initial setup for Amazon Drive involves getting a token from Amazon which you need to do in your browser. rclone config walks you through it. The configuration process for Amazon Drive may involve using an oauth proxy. This is used to keep the Amazon credentials out of the source code. The proxy runs in Google's very secure App Engine environment and doesn't store any credentials which pass through it. Since rclone doesn't currently have its own Amazon Drive credentials so you will either need to have your own client_id and client_secret with Amazon Drive, or use a a third party ouath proxy in which case you will need to enter client_id, client_secret, auth_url and token_url. Note also if you are not using Amazon's auth_url and token_url, (ie you filled in something for those) then if setting up on a remote machine you can only use the copying the config method of configuration - rclone authorize will not work. Here is an example of how to make a remote called remote. First run: rclone config This will guide you through an interactive setup process: No remotes found - make a new one n) New remote r) Rename remote c) Copy remote s) Set configuration password q) Quit config n/r/c/s/q> n name> remote Type of storage to configure. Choose a number from below, or type in your own value 1 / Amazon Drive \ "amazon cloud drive" 2 / Amazon S3 (also Dreamhost, Ceph, Minio) \ "s3" 3 / Backblaze B2 \ "b2" 4 / Dropbox \ "dropbox" 5 / Encrypt/Decrypt a remote \ "crypt" 6 / FTP Connection \ "ftp" 7 / Google Cloud Storage (this is not Google Drive) \ "google cloud storage" 8 / Google Drive \ "drive" 9 / Hubic \ "hubic" 10 / Local Disk \ "local" 11 / Microsoft OneDrive \ "onedrive" 12 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH) \ "swift" 13 / SSH/SFTP Connection \ "sftp" 14 / Yandex Disk \ "yandex" Storage> 1 Amazon Application Client Id - required. client_id> your client ID goes here Amazon Application Client Secret - required. client_secret> your client secret goes here Auth server URL - leave blank to use Amazon's. auth_url> Optional auth URL Token server url - leave blank to use Amazon's. token_url> Optional token URL Remote config Make sure your Redirect URL is set to "http://127.0.0.1:53682/" in your custom config. Use auto config? * Say Y if not sure * Say N if you are working on a remote or headless machine y) Yes n) No y/n> y If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth Log in and authorize rclone for access Waiting for code... Got code -------------------- [remote] client_id = your client ID goes here client_secret = your client secret goes here auth_url = Optional auth URL token_url = Optional token URL token = {"access_token":"xxxxxxxxxxxxxxxxxxxxxxx","token_type":"bearer","refresh_token":"xxxxxxxxxxxxxxxxxx","expiry":"2015-09-06T16:07:39.658438471+01:00"} -------------------- y) Yes this is OK e) Edit this remote d) Delete this remote y/e/d> y See the remote setup docs for how to set it up on a machine with no Internet browser available. Note that rclone runs a webserver on your local machine to collect the token as returned from Amazon. This only runs from the moment it opens your browser to the moment you get back the verification code. This is on http://127.0.0.1:53682/ and this it may require you to unblock it temporarily if you are running a host firewall. Once configured you can then use rclone like this, List directories in top level of your Amazon Drive rclone lsd remote: List all the files in your Amazon Drive rclone ls remote: To copy a local directory to an Amazon Drive directory called backup rclone copy /home/source remote:backup Modified time and MD5SUMs Amazon Drive doesn't allow modification times to be changed via the API so these won't be accurate or used for syncing. It does store MD5SUMs so for a more accurate sync, you can use the --checksum flag. Deleting files Any files you delete with rclone will end up in the trash. Amazon don't provide an API to permanently delete files, nor to empty the trash, so you will have to do that with one of Amazon's apps or via the Amazon Drive website. As of November 17, 2016, files are automatically deleted by Amazon from the trash after 30 days. Using with non .com Amazon accounts Let's say you usually use amazon.co.uk. When you authenticate with rclone it will take you to an amazon.com page to log in. Your amazon.co.uk email and password should work here just fine. Specific options Here are the command line options specific to this cloud storage system. --acd-templink-threshold=SIZE Files this size or more will be downloaded via their tempLink. This is to work around a problem with Amazon Drive which blocks downloads of files bigger than about 10GB. The default for this is 9GB which shouldn't need to be changed. To download files above this threshold, rclone requests a tempLink which downloads the file through a temporary URL directly from the underlying S3 storage. --acd-upload-wait-per-gb=TIME Sometimes Amazon Drive gives an error when a file has been fully uploaded but the file appears anyway after a little while. This happens sometimes for files over 1GB in size and nearly every time for files bigger than 10GB. This parameter controls the time rclone waits for the file to appear. The default value for this parameter is 3 minutes per GB, so by default it will wait 3 minutes for every GB uploaded to see if the file appears. You can disable this feature by setting it to 0. This may cause conflict errors as rclone retries the failed upload but the file will most likely appear correctly eventually. These values were determined empirically by observing lots of uploads of big files for a range of file sizes. Upload with the -v flag to see more info about what rclone is doing in this situation. Limitations Note that Amazon Drive is case insensitive so you can't have a file called "Hello.doc" and one called "hello.doc". Amazon Drive has rate limiting so you may notice errors in the sync (429 errors). rclone will automatically retry the sync up to 3 times by default (see --retries flag) which should hopefully work around this problem. Amazon Drive has an internal limit of file sizes that can be uploaded to the service. This limit is not officially published, but all files larger than this will fail. At the time of writing (Jan 2016) is in the area of 50GB per file. This means that larger files are likely to fail. Unfortunately there is no way for rclone to see that this failure is because of file size, so it will retry the operation, as any other failure. To avoid this problem, use --max-size 50000M option to limit the maximum size of uploaded files. Note that --max-size does not split files into segments, it only ignores files over this size. Amazon S3 Storage Providers The S3 backend can be used with a number of different providers: - AWS S3 - Ceph - DigitalOcean Spaces - Dreamhost - IBM COS S3 - Minio - Wasabi Paths are specified as remote:bucket (or remote: for the lsd command.) You may put subdirectories in too, eg remote:bucket/path/to/dir. Once you have made a remote (see the provider specific section above) you can use it like this: See all buckets rclone lsd remote: Make a new bucket rclone mkdir remote:bucket List the contents of a bucket rclone ls remote:bucket Sync /home/local/directory to the remote bucket, deleting any excess files in the bucket. rclone sync /home/local/directory remote:bucket AWS S3 Here is an example of making an s3 configuration. First run rclone config This will guide you through an interactive setup process. No remotes found - make a new one n) New remote s) Set configuration password q) Quit config n/s/q> n name> remote Type of storage to configure. Choose a number from below, or type in your own value 1 / Alias for a existing remote \ "alias" 2 / Amazon Drive \ "amazon cloud drive" 3 / Amazon S3 Compliant Storage Providers (AWS, Ceph, Dreamhost, IBM COS, Minio) \ "s3" 4 / Backblaze B2 \ "b2" [snip] 23 / http Connection \ "http" Storage> s3 Choose your S3 provider. Choose a number from below, or type in your own value 1 / Amazon Web Services (AWS) S3 \ "AWS" 2 / Ceph Object Storage \ "Ceph" 3 / Digital Ocean Spaces \ "DigitalOcean" 4 / Dreamhost DreamObjects \ "Dreamhost" 5 / IBM COS S3 \ "IBMCOS" 6 / Minio Object Storage \ "Minio" 7 / Wasabi Object Storage \ "Wasabi" 8 / Any other S3 compatible provider \ "Other" provider> 1 Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars). Only applies if access_key_id and secret_access_key is blank. Choose a number from below, or type in your own value 1 / Enter AWS credentials in the next step \ "false" 2 / Get AWS credentials from the environment (env vars or IAM) \ "true" env_auth> 1 AWS Access Key ID - leave blank for anonymous access or runtime credentials. access_key_id> XXX AWS Secret Access Key (password) - leave blank for anonymous access or runtime credentials. secret_access_key> YYY Region to connect to. Choose a number from below, or type in your own value / The default endpoint - a good choice if you are unsure. 1 | US Region, Northern Virginia or Pacific Northwest. | Leave location constraint empty. \ "us-east-1" / US East (Ohio) Region 2 | Needs location constraint us-east-2. \ "us-east-2" / US West (Oregon) Region 3 | Needs location constraint us-west-2. \ "us-west-2" / US West (Northern California) Region 4 | Needs location constraint us-west-1. \ "us-west-1" / Canada (Central) Region 5 | Needs location constraint ca-central-1. \ "ca-central-1" / EU (Ireland) Region 6 | Needs location constraint EU or eu-west-1. \ "eu-west-1" / EU (London) Region 7 | Needs location constraint eu-west-2. \ "eu-west-2" / EU (Frankfurt) Region 8 | Needs location constraint eu-central-1. \ "eu-central-1" / Asia Pacific (Singapore) Region 9 | Needs location constraint ap-southeast-1. \ "ap-southeast-1" / Asia Pacific (Sydney) Region 10 | Needs location constraint ap-southeast-2. \ "ap-southeast-2" / Asia Pacific (Tokyo) Region 11 | Needs location constraint ap-northeast-1. \ "ap-northeast-1" / Asia Pacific (Seoul) 12 | Needs location constraint ap-northeast-2. \ "ap-northeast-2" / Asia Pacific (Mumbai) 13 | Needs location constraint ap-south-1. \ "ap-south-1" / South America (Sao Paulo) Region 14 | Needs location constraint sa-east-1. \ "sa-east-1" region> 1 Endpoint for S3 API. Leave blank if using AWS to use the default endpoint for the region. endpoint> Location constraint - must be set to match the Region. Used when creating buckets only. Choose a number from below, or type in your own value 1 / Empty for US Region, Northern Virginia or Pacific Northwest. \ "" 2 / US East (Ohio) Region. \ "us-east-2" 3 / US West (Oregon) Region. \ "us-west-2" 4 / US West (Northern California) Region. \ "us-west-1" 5 / Canada (Central) Region. \ "ca-central-1" 6 / EU (Ireland) Region. \ "eu-west-1" 7 / EU (London) Region. \ "eu-west-2" 8 / EU Region. \ "EU" 9 / Asia Pacific (Singapore) Region. \ "ap-southeast-1" 10 / Asia Pacific (Sydney) Region. \ "ap-southeast-2" 11 / Asia Pacific (Tokyo) Region. \ "ap-northeast-1" 12 / Asia Pacific (Seoul) \ "ap-northeast-2" 13 / Asia Pacific (Mumbai) \ "ap-south-1" 14 / South America (Sao Paulo) Region. \ "sa-east-1" location_constraint> 1 Canned ACL used when creating buckets and/or storing objects in S3. For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl Choose a number from below, or type in your own value 1 / Owner gets FULL_CONTROL. No one else has access rights (default). \ "private" 2 / Owner gets FULL_CONTROL. The AllUsers group gets READ access. \ "public-read" / Owner gets FULL_CONTROL. The AllUsers group gets READ and WRITE access. 3 | Granting this on a bucket is generally not recommended. \ "public-read-write" 4 / Owner gets FULL_CONTROL. The AuthenticatedUsers group gets READ access. \ "authenticated-read" / Object owner gets FULL_CONTROL. Bucket owner gets READ access. 5 | If you specify this canned ACL when creating a bucket, Amazon S3 ignores it. \ "bucket-owner-read" / Both the object owner and the bucket owner get FULL_CONTROL over the object. 6 | If you specify this canned ACL when creating a bucket, Amazon S3 ignores it. \ "bucket-owner-full-control" acl> 1 The server-side encryption algorithm used when storing this object in S3. Choose a number from below, or type in your own value 1 / None \ "" 2 / AES256 \ "AES256" server_side_encryption> 1 The storage class to use when storing objects in S3. Choose a number from below, or type in your own value 1 / Default \ "" 2 / Standard storage class \ "STANDARD" 3 / Reduced redundancy storage class \ "REDUCED_REDUNDANCY" 4 / Standard Infrequent Access storage class \ "STANDARD_IA" 5 / One Zone Infrequent Access storage class \ "ONEZONE_IA" storage_class> 1 Remote config -------------------- [remote] type = s3 provider = AWS env_auth = false access_key_id = XXX secret_access_key = YYY region = us-east-1 endpoint = location_constraint = acl = private server_side_encryption = storage_class = -------------------- y) Yes this is OK e) Edit this remote d) Delete this remote y/e/d> --fast-list This remote supports --fast-list which allows you to use fewer transactions in exchange for more memory. See the rclone docs for more details. --update and --use-server-modtime As noted below, the modified time is stored on metadata on the object. It is used by default for all operations that require checking the time a file was last updated. It allows rclone to treat the remote more like a true filesystem, but it is inefficient because it requires an extra API call to retrieve the metadata. For many operations, the time the object was last uploaded to the remote is sufficient to determine if it is "dirty". By using --update along with --use-server-modtime, you can avoid the extra API call and simply upload files whose local modtime is newer than the time it was last uploaded. Modified time The modified time is stored as metadata on the object as X-Amz-Meta-Mtime as floating point since the epoch accurate to 1 ns. Multipart uploads rclone supports multipart uploads with S3 which means that it can upload files bigger than 5GB. Note that files uploaded _both_ with multipart upload _and_ through crypt remotes do not have MD5 sums. Buckets and Regions With Amazon S3 you can list buckets (rclone lsd) using any region, but you can only access the content of a bucket from the region it was created in. If you attempt to access a bucket from the wrong region, you will get an error, incorrect region, the bucket is not in 'XXX' region. Authentication There are a number of ways to supply rclone with a set of AWS credentials, with and without using the environment. The different authentication methods are tried in this order: - Directly in the rclone configuration file (env_auth = false in the config file): - access_key_id and secret_access_key are required. - session_token can be optionally set when using AWS STS. - Runtime configuration (env_auth = true in the config file): - Export the following environment variables before running rclone: - Access Key ID: AWS_ACCESS_KEY_ID or AWS_ACCESS_KEY - Secret Access Key: AWS_SECRET_ACCESS_KEY or AWS_SECRET_KEY - Session Token: AWS_SESSION_TOKEN (optional) - Or, use a named profile: - Profile files are standard files used by AWS CLI tools - By default it will use the profile in your home directory (eg ~/.aws/credentials on unix based systems) file and the "default" profile, to change set these environment variables: - AWS_SHARED_CREDENTIALS_FILE to control which file. - AWS_PROFILE to control which profile to use. - Or, run rclone in an ECS task with an IAM role (AWS only). - Or, run rclone on an EC2 instance with an IAM role (AWS only). If none of these option actually end up providing rclone with AWS credentials then S3 interaction will be non-authenticated (see below). S3 Permissions When using the sync subcommand of rclone the following minimum permissions are required to be available on the bucket being written to: - ListBucket - DeleteObject - GetObject - PutObject - PutObjectACL Example policy: { "Version": "2012-10-17", "Statement": [ { "Effect": "Allow", "Principal": { "AWS": "arn:aws:iam::USER_SID:user/USER_NAME" }, "Action": [ "s3:ListBucket", "s3:DeleteObject", "s3:GetObject", "s3:PutObject", "s3:PutObjectAcl" ], "Resource": [ "arn:aws:s3:::BUCKET_NAME/*", "arn:aws:s3:::BUCKET_NAME" ] } ] } Notes on above: 1. This is a policy that can be used when creating bucket. It assumes that USER_NAME has been created. 2. The Resource entry must include both resource ARNs, as one implies the bucket and the other implies the bucket's objects. For reference, here's an Ansible script that will generate one or more buckets that will work with rclone sync. Key Management System (KMS) If you are using server side encryption with KMS then you will find you can't transfer small objects. As a work-around you can use the --ignore-checksum flag. A proper fix is being worked on in issue #1824. Glacier You can transition objects to glacier storage using a lifecycle policy. The bucket can still be synced or copied into normally, but if rclone tries to access the data you will see an error like below. 2017/09/11 19:07:43 Failed to sync: failed to open source object: Object in GLACIER, restore first: path/to/file In this case you need to restore the object(s) in question before using rclone. Specific options Here are the command line options specific to this cloud storage system. --s3-acl=STRING Canned ACL used when creating buckets and/or storing objects in S3. For more info visit the canned ACL docs. --s3-storage-class=STRING Storage class to upload new objects with. Available options include: - STANDARD - default storage class - STANDARD_IA - for less frequently accessed data (e.g backups) - ONEZONE_IA - for storing data in only one Availability Zone - REDUCED_REDUNDANCY (only for noncritical, reproducible data, has lower redundancy) --s3-chunk-size=SIZE Any files larger than this will be uploaded in chunks of this size. The default is 5MB. The minimum is 5MB. Note that 2 chunks of this size are buffered in memory per transfer. If you are transferring large files over high speed links and you have enough memory, then increasing this will speed up the transfers. --s3-force-path-style=BOOL If this is true (the default) then rclone will use path style access, if false then rclone will use virtual path style. See the AWS S3 docs for more info. Some providers (eg Aliyun OSS or Netease COS) require this set to false. It can also be set in the config in the advanced section. --s3-upload-concurrency Number of chunks of the same file that are uploaded concurrently. Default is 2. If you are uploading small amount of large file over high speed link and these uploads do not fully utilize your bandwidth, then increasing this may help to speed up the transfers. Anonymous access to public buckets If you want to use rclone to access a public bucket, configure with a blank access_key_id and secret_access_key. Your config should end up looking like this: [anons3] type = s3 provider = AWS env_auth = false access_key_id = secret_access_key = region = us-east-1 endpoint = location_constraint = acl = private server_side_encryption = storage_class = Then use it as normal with the name of the public bucket, eg rclone lsd anons3:1000genomes You will be able to list and copy data but not upload it. Ceph Ceph is an open source unified, distributed storage system designed for excellent performance, reliability and scalability. It has an S3 compatible object storage interface. To use rclone with Ceph, configure as above but leave the region blank and set the endpoint. You should end up with something like this in your config: [ceph] type = s3 provider = Ceph env_auth = false access_key_id = XXX secret_access_key = YYY region = endpoint = https://ceph.endpoint.example.com location_constraint = acl = server_side_encryption = storage_class = Note also that Ceph sometimes puts / in the passwords it gives users. If you read the secret access key using the command line tools you will get a JSON blob with the / escaped as \/. Make sure you only write / in the secret access key. Eg the dump from Ceph looks something like this (irrelevant keys removed). { "user_id": "xxx", "display_name": "xxxx", "keys": [ { "user": "xxx", "access_key": "xxxxxx", "secret_key": "xxxxxx\/xxxx" } ], } Because this is a json dump, it is encoding the / as \/, so if you use the secret key as xxxxxx/xxxx it will work fine. Dreamhost Dreamhost DreamObjects is an object storage system based on CEPH. To use rclone with Dreamhost, configure as above but leave the region blank and set the endpoint. You should end up with something like this in your config: [dreamobjects] type = s3 provider = DreamHost env_auth = false access_key_id = your_access_key secret_access_key = your_secret_key region = endpoint = objects-us-west-1.dream.io location_constraint = acl = private server_side_encryption = storage_class = DigitalOcean Spaces Spaces is an S3-interoperable object storage service from cloud provider DigitalOcean. To connect to DigitalOcean Spaces you will need an access key and secret key. These can be retrieved on the "Applications & API" page of the DigitalOcean control panel. They will be needed when promted by rclone config for your access_key_id and secret_access_key. When prompted for a region or location_constraint, press enter to use the default value. The region must be included in the endpoint setting (e.g. nyc3.digitaloceanspaces.com). The defualt values can be used for other settings. Going through the whole process of creating a new remote by running rclone config, each prompt should be answered as shown below: Storage> s3 env_auth> 1 access_key_id> YOUR_ACCESS_KEY secret_access_key> YOUR_SECRET_KEY region> endpoint> nyc3.digitaloceanspaces.com location_constraint> acl> storage_class> The resulting configuration file should look like: [spaces] type = s3 provider = DigitalOcean env_auth = false access_key_id = YOUR_ACCESS_KEY secret_access_key = YOUR_SECRET_KEY region = endpoint = nyc3.digitaloceanspaces.com location_constraint = acl = server_side_encryption = storage_class = Once configured, you can create a new Space and begin copying files. For example: rclone mkdir spaces:my-new-space rclone copy /path/to/files spaces:my-new-space IBM COS (S3) Information stored with IBM Cloud Object Storage is encrypted and dispersed across multiple geographic locations, and accessed through an implementation of the S3 API. This service makes use of the distributed storage technologies provided by IBM’s Cloud Object Storage System (formerly Cleversafe). For more information visit: (http://www.ibm.com/cloud/object-storage) To configure access to IBM COS S3, follow the steps below: 1. Run rclone config and select n for a new remote. 2018/02/14 14:13:11 NOTICE: Config file "C:\\Users\\a\\.config\\rclone\\rclone.conf" not found - using defaults No remotes found - make a new one n) New remote s) Set configuration password q) Quit config n/s/q> n 2. Enter the name for the configuration name> 3. Select "s3" storage. Choose a number from below, or type in your own value 1 / Alias for a existing remote \ "alias" 2 / Amazon Drive \ "amazon cloud drive" 3 / Amazon S3 Complaint Storage Providers (Dreamhost, Ceph, Minio, IBM COS) \ "s3" 4 / Backblaze B2 \ "b2" [snip] 23 / http Connection \ "http" Storage> 3 4. Select IBM COS as the S3 Storage Provider. Choose the S3 provider. Choose a number from below, or type in your own value 1 / Choose this option to configure Storage to AWS S3 \ "AWS" 2 / Choose this option to configure Storage to Ceph Systems \ "Ceph" 3 / Choose this option to configure Storage to Dreamhost \ "Dreamhost" 4 / Choose this option to the configure Storage to IBM COS S3 \ "IBMCOS" 5 / Choose this option to the configure Storage to Minio \ "Minio" Provider>4 5. Enter the Access Key and Secret. AWS Access Key ID - leave blank for anonymous access or runtime credentials. access_key_id> <> AWS Secret Access Key (password) - leave blank for anonymous access or runtime credentials. secret_access_key> <> 6. Specify the endpoint for IBM COS. For Public IBM COS, choose from the option below. For On Premise IBM COS, enter an enpoint address. Endpoint for IBM COS S3 API. Specify if using an IBM COS On Premise. Choose a number from below, or type in your own value 1 / US Cross Region Endpoint \ "s3-api.us-geo.objectstorage.softlayer.net" 2 / US Cross Region Dallas Endpoint \ "s3-api.dal.us-geo.objectstorage.softlayer.net" 3 / US Cross Region Washington DC Endpoint \ "s3-api.wdc-us-geo.objectstorage.softlayer.net" 4 / US Cross Region San Jose Endpoint \ "s3-api.sjc-us-geo.objectstorage.softlayer.net" 5 / US Cross Region Private Endpoint \ "s3-api.us-geo.objectstorage.service.networklayer.com" 6 / US Cross Region Dallas Private Endpoint \ "s3-api.dal-us-geo.objectstorage.service.networklayer.com" 7 / US Cross Region Washington DC Private Endpoint \ "s3-api.wdc-us-geo.objectstorage.service.networklayer.com" 8 / US Cross Region San Jose Private Endpoint \ "s3-api.sjc-us-geo.objectstorage.service.networklayer.com" 9 / US Region East Endpoint \ "s3.us-east.objectstorage.softlayer.net" 10 / US Region East Private Endpoint \ "s3.us-east.objectstorage.service.networklayer.com" 11 / US Region South Endpoint [snip] 34 / Toronto Single Site Private Endpoint \ "s3.tor01.objectstorage.service.networklayer.com" endpoint>1 7. Specify a IBM COS Location Constraint. The location constraint must match endpoint when using IBM Cloud Public. For on-prem COS, do not make a selection from this list, hit enter 1 / US Cross Region Standard \ "us-standard" 2 / US Cross Region Vault \ "us-vault" 3 / US Cross Region Cold \ "us-cold" 4 / US Cross Region Flex \ "us-flex" 5 / US East Region Standard \ "us-east-standard" 6 / US East Region Vault \ "us-east-vault" 7 / US East Region Cold \ "us-east-cold" 8 / US East Region Flex \ "us-east-flex" 9 / US South Region Standard \ "us-south-standard" 10 / US South Region Vault \ "us-south-vault" [snip] 32 / Toronto Flex \ "tor01-flex" location_constraint>1 8. Specify a canned ACL. IBM Cloud (Strorage) supports "public-read" and "private". IBM Cloud(Infra) supports all the canned ACLs. On-Premise COS supports all the canned ACLs. Canned ACL used when creating buckets and/or storing objects in S3. For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl Choose a number from below, or type in your own value 1 / Owner gets FULL_CONTROL. No one else has access rights (default). This acl is available on IBM Cloud (Infra), IBM Cloud (Storage), On-Premise COS \ "private" 2 / Owner gets FULL_CONTROL. The AllUsers group gets READ access. This acl is available on IBM Cloud (Infra), IBM Cloud (Storage), On-Premise IBM COS \ "public-read" 3 / Owner gets FULL_CONTROL. The AllUsers group gets READ and WRITE access. This acl is available on IBM Cloud (Infra), On-Premise IBM COS \ "public-read-write" 4 / Owner gets FULL_CONTROL. The AuthenticatedUsers group gets READ access. Not supported on Buckets. This acl is available on IBM Cloud (Infra) and On-Premise IBM COS \ "authenticated-read" acl> 1 9. Review the displayed configuration and accept to save the "remote" then quit. The config file should look like this [xxx] type = s3 Provider = IBMCOS access_key_id = xxx secret_access_key = yyy endpoint = s3-api.us-geo.objectstorage.softlayer.net location_constraint = us-standard acl = private 10. Execute rclone commands 1) Create a bucket. rclone mkdir IBM-COS-XREGION:newbucket 2) List available buckets. rclone lsd IBM-COS-XREGION: -1 2017-11-08 21:16:22 -1 test -1 2018-02-14 20:16:39 -1 newbucket 3) List contents of a bucket. rclone ls IBM-COS-XREGION:newbucket 18685952 test.exe 4) Copy a file from local to remote. rclone copy /Users/file.txt IBM-COS-XREGION:newbucket 5) Copy a file from remote to local. rclone copy IBM-COS-XREGION:newbucket/file.txt . 6) Delete a file on remote. rclone delete IBM-COS-XREGION:newbucket/file.txt Minio Minio is an object storage server built for cloud application developers and devops. It is very easy to install and provides an S3 compatible server which can be used by rclone. To use it, install Minio following the instructions here. When it configures itself Minio will print something like this Endpoint: http://192.168.1.106:9000 http://172.23.0.1:9000 AccessKey: USWUXHGYZQYFYFFIT3RE SecretKey: MOJRH0mkL1IPauahWITSVvyDrQbEEIwljvmxdq03 Region: us-east-1 SQS ARNs: arn:minio:sqs:us-east-1:1:redis arn:minio:sqs:us-east-1:2:redis Browser Access: http://192.168.1.106:9000 http://172.23.0.1:9000 Command-line Access: https://docs.minio.io/docs/minio-client-quickstart-guide $ mc config host add myminio http://192.168.1.106:9000 USWUXHGYZQYFYFFIT3RE MOJRH0mkL1IPauahWITSVvyDrQbEEIwljvmxdq03 Object API (Amazon S3 compatible): Go: https://docs.minio.io/docs/golang-client-quickstart-guide Java: https://docs.minio.io/docs/java-client-quickstart-guide Python: https://docs.minio.io/docs/python-client-quickstart-guide JavaScript: https://docs.minio.io/docs/javascript-client-quickstart-guide .NET: https://docs.minio.io/docs/dotnet-client-quickstart-guide Drive Capacity: 26 GiB Free, 165 GiB Total These details need to go into rclone config like this. Note that it is important to put the region in as stated above. env_auth> 1 access_key_id> USWUXHGYZQYFYFFIT3RE secret_access_key> MOJRH0mkL1IPauahWITSVvyDrQbEEIwljvmxdq03 region> us-east-1 endpoint> http://192.168.1.106:9000 location_constraint> server_side_encryption> Which makes the config file look like this [minio] type = s3 provider = Minio env_auth = false access_key_id = USWUXHGYZQYFYFFIT3RE secret_access_key = MOJRH0mkL1IPauahWITSVvyDrQbEEIwljvmxdq03 region = us-east-1 endpoint = http://192.168.1.106:9000 location_constraint = server_side_encryption = So once set up, for example to copy files into a bucket rclone copy /path/to/files minio:bucket Wasabi Wasabi is a cloud-based object storage service for a broad range of applications and use cases. Wasabi is designed for individuals and organizations that require a high-performance, reliable, and secure data storage infrastructure at minimal cost. Wasabi provides an S3 interface which can be configured for use with rclone like this. No remotes found - make a new one n) New remote s) Set configuration password n/s> n name> wasabi Type of storage to configure. Choose a number from below, or type in your own value 1 / Amazon Drive \ "amazon cloud drive" 2 / Amazon S3 (also Dreamhost, Ceph, Minio) \ "s3" [snip] Storage> s3 Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars). Only applies if access_key_id and secret_access_key is blank. Choose a number from below, or type in your own value 1 / Enter AWS credentials in the next step \ "false" 2 / Get AWS credentials from the environment (env vars or IAM) \ "true" env_auth> 1 AWS Access Key ID - leave blank for anonymous access or runtime credentials. access_key_id> YOURACCESSKEY AWS Secret Access Key (password) - leave blank for anonymous access or runtime credentials. secret_access_key> YOURSECRETACCESSKEY Region to connect to. Choose a number from below, or type in your own value / The default endpoint - a good choice if you are unsure. 1 | US Region, Northern Virginia or Pacific Northwest. | Leave location constraint empty. \ "us-east-1" [snip] region> us-east-1 Endpoint for S3 API. Leave blank if using AWS to use the default endpoint for the region. Specify if using an S3 clone such as Ceph. endpoint> s3.wasabisys.com Location constraint - must be set to match the Region. Used when creating buckets only. Choose a number from below, or type in your own value 1 / Empty for US Region, Northern Virginia or Pacific Northwest. \ "" [snip] location_constraint> Canned ACL used when creating buckets and/or storing objects in S3. For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl Choose a number from below, or type in your own value 1 / Owner gets FULL_CONTROL. No one else has access rights (default). \ "private" [snip] acl> The server-side encryption algorithm used when storing this object in S3. Choose a number from below, or type in your own value 1 / None \ "" 2 / AES256 \ "AES256" server_side_encryption> The storage class to use when storing objects in S3. Choose a number from below, or type in your own value 1 / Default \ "" 2 / Standard storage class \ "STANDARD" 3 / Reduced redundancy storage class \ "REDUCED_REDUNDANCY" 4 / Standard Infrequent Access storage class \ "STANDARD_IA" storage_class> Remote config -------------------- [wasabi] env_auth = false access_key_id = YOURACCESSKEY secret_access_key = YOURSECRETACCESSKEY region = us-east-1 endpoint = s3.wasabisys.com location_constraint = acl = server_side_encryption = storage_class = -------------------- y) Yes this is OK e) Edit this remote d) Delete this remote y/e/d> y This will leave the config file looking like this. [wasabi] type = s3 provider = Wasabi env_auth = false access_key_id = YOURACCESSKEY secret_access_key = YOURSECRETACCESSKEY region = endpoint = s3.wasabisys.com location_constraint = acl = server_side_encryption = storage_class = Aliyun OSS / Netease NOS This describes how to set up Aliyun OSS - Netease NOS is the same except for different endpoints. Note this is a pretty standard S3 setup, except for the setting of force_path_style = false in the advanced config. # rclone config e/n/d/r/c/s/q> n name> oss Type of storage to configure. Enter a string value. Press Enter for the default (""). Choose a number from below, or type in your own value 3 / Amazon S3 Compliant Storage Providers (AWS, Ceph, Dreamhost, IBM COS, Minio) \ "s3" Storage> s3 Choose your S3 provider. Enter a string value. Press Enter for the default (""). Choose a number from below, or type in your own value 8 / Any other S3 compatible provider \ "Other" provider> other Get AWS credentials from runtime (environment variables or EC2/ECS meta data if no env vars). Only applies if access_key_id and secret_access_key is blank. Enter a boolean value (true or false). Press Enter for the default ("false"). Choose a number from below, or type in your own value 1 / Enter AWS credentials in the next step \ "false" 2 / Get AWS credentials from the environment (env vars or IAM) \ "true" env_auth> 1 AWS Access Key ID. Leave blank for anonymous access or runtime credentials. Enter a string value. Press Enter for the default (""). access_key_id> xxxxxxxxxxxx AWS Secret Access Key (password) Leave blank for anonymous access or runtime credentials. Enter a string value. Press Enter for the default (""). secret_access_key> xxxxxxxxxxxxxxxxx Region to connect to. Leave blank if you are using an S3 clone and you don't have a region. Enter a string value. Press Enter for the default (""). Choose a number from below, or type in your own value 1 / Use this if unsure. Will use v4 signatures and an empty region. \ "" 2 / Use this only if v4 signatures don't work, eg pre Jewel/v10 CEPH. \ "other-v2-signature" region> 1 Endpoint for S3 API. Required when using an S3 clone. Enter a string value. Press Enter for the default (""). Choose a number from below, or type in your own value endpoint> oss-cn-shenzhen.aliyuncs.com Location constraint - must be set to match the Region. Leave blank if not sure. Used when creating buckets only. Enter a string value. Press Enter for the default (""). location_constraint> Canned ACL used when creating buckets and/or storing objects in S3. For more info visit https://docs.aws.amazon.com/AmazonS3/latest/dev/acl-overview.html#canned-acl Enter a string value. Press Enter for the default (""). Choose a number from below, or type in your own value 1 / Owner gets FULL_CONTROL. No one else has access rights (default). \ "private" acl> 1 Edit advanced config? (y/n) y) Yes n) No y/n> y Chunk size to use for uploading Enter a size with suffix k,M,G,T. Press Enter for the default ("5M"). chunk_size> Don't store MD5 checksum with object metadata Enter a boolean value (true or false). Press Enter for the default ("false"). disable_checksum> An AWS session token Enter a string value. Press Enter for the default (""). session_token> Concurrency for multipart uploads. Enter a signed integer. Press Enter for the default ("2"). upload_concurrency> If true use path style access if false use virtual hosted style. Some providers (eg Aliyun OSS or Netease COS) require this. Enter a boolean value (true or false). Press Enter for the default ("true"). force_path_style> false Remote config -------------------- [oss] type = s3 provider = Other env_auth = false access_key_id = xxxxxxxxx secret_access_key = xxxxxxxxxxxxx endpoint = oss-cn-shenzhen.aliyuncs.com acl = private force_path_style = false -------------------- y) Yes this is OK e) Edit this remote d) Delete this remote y/e/d> y Backblaze B2 B2 is Backblaze's cloud storage system. Paths are specified as remote:bucket (or remote: for the lsd command.) You may put subdirectories in too, eg remote:bucket/path/to/dir. Here is an example of making a b2 configuration. First run rclone config This will guide you through an interactive setup process. You will need your account number (a short hex number) and key (a long hex number) which you can get from the b2 control panel. No remotes found - make a new one n) New remote q) Quit config n/q> n name> remote Type of storage to configure. Choose a number from below, or type in your own value 1 / Amazon Drive \ "amazon cloud drive" 2 / Amazon S3 (also Dreamhost, Ceph, Minio) \ "s3" 3 / Backblaze B2 \ "b2" 4 / Dropbox \ "dropbox" 5 / Encrypt/Decrypt a remote \ "crypt" 6 / Google Cloud Storage (this is not Google Drive) \ "google cloud storage" 7 / Google Drive \ "drive" 8 / Hubic \ "hubic" 9 / Local Disk \ "local" 10 / Microsoft OneDrive \ "onedrive" 11 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH) \ "swift" 12 / SSH/SFTP Connection \ "sftp" 13 / Yandex Disk \ "yandex" Storage> 3 Account ID or Application Key ID account> 123456789abc Application Key key> 0123456789abcdef0123456789abcdef0123456789 Endpoint for the service - leave blank normally. endpoint> Remote config -------------------- [remote] account = 123456789abc key = 0123456789abcdef0123456789abcdef0123456789 endpoint = -------------------- y) Yes this is OK e) Edit this remote d) Delete this remote y/e/d> y This remote is called remote and can now be used like this See all buckets rclone lsd remote: Create a new bucket rclone mkdir remote:bucket List the contents of a bucket rclone ls remote:bucket Sync /home/local/directory to the remote bucket, deleting any excess files in the bucket. rclone sync /home/local/directory remote:bucket Application Keys B2 supports multiple Application Keys for different access permission to B2 Buckets. You can use these with rclone too. Follow Backblaze's docs to create an Application Key with the required permission and add the Application Key ID as the account and the Application Key itself as the key. Note that you must put the Application Key ID as the account - you can't use the master Account ID. If you try then B2 will return 401 errors. --fast-list This remote supports --fast-list which allows you to use fewer transactions in exchange for more memory. See the rclone docs for more details. Modified time The modified time is stored as metadata on the object as X-Bz-Info-src_last_modified_millis as milliseconds since 1970-01-01 in the Backblaze standard. Other tools should be able to use this as a modified time. Modified times are used in syncing and are fully supported except in the case of updating a modification time on an existing object. In this case the object will be uploaded again as B2 doesn't have an API method to set the modification time independent of doing an upload. SHA1 checksums The SHA1 checksums of the files are checked on upload and download and will be used in the syncing process. Large files (bigger than the limit in --b2-upload-cutoff) which are uploaded in chunks will store their SHA1 on the object as X-Bz-Info-large_file_sha1 as recommended by Backblaze. For a large file to be uploaded with an SHA1 checksum, the source needs to support SHA1 checksums. The local disk supports SHA1 checksums so large file transfers from local disk will have an SHA1. See the overview for exactly which remotes support SHA1. Sources which don't support SHA1, in particular crypt will upload large files without SHA1 checksums. This may be fixed in the future (see #1767). Files sizes below --b2-upload-cutoff will always have an SHA1 regardless of the source. Transfers Backblaze recommends that you do lots of transfers simultaneously for maximum speed. In tests from my SSD equipped laptop the optimum setting is about --transfers 32 though higher numbers may be used for a slight speed improvement. The optimum number for you may vary depending on your hardware, how big the files are, how much you want to load your computer, etc. The default of --transfers 4 is definitely too low for Backblaze B2 though. Note that uploading big files (bigger than 200 MB by default) will use a 96 MB RAM buffer by default. There can be at most --transfers of these in use at any moment, so this sets the upper limit on the memory used. Versions When rclone uploads a new version of a file it creates a new version of it. Likewise when you delete a file, the old version will be marked hidden and still be available. Conversely, you may opt in to a "hard delete" of files with the --b2-hard-delete flag which would permanently remove the file instead of hiding it. Old versions of files, where available, are visible using the --b2-versions flag. If you wish to remove all the old versions then you can use the rclone cleanup remote:bucket command which will delete all the old versions of files, leaving the current ones intact. You can also supply a path and only old versions under that path will be deleted, eg rclone cleanup remote:bucket/path/to/stuff. When you purge a bucket, the current and the old versions will be deleted then the bucket will be deleted. However delete will cause the current versions of the files to become hidden old versions. Here is a session showing the listing and retrieval of an old version followed by a cleanup of the old versions. Show current version and all the versions with --b2-versions flag. $ rclone -q ls b2:cleanup-test 9 one.txt $ rclone -q --b2-versions ls b2:cleanup-test 9 one.txt 8 one-v2016-07-04-141032-000.txt 16 one-v2016-07-04-141003-000.txt 15 one-v2016-07-02-155621-000.txt Retrieve an old version $ rclone -q --b2-versions copy b2:cleanup-test/one-v2016-07-04-141003-000.txt /tmp $ ls -l /tmp/one-v2016-07-04-141003-000.txt -rw-rw-r-- 1 ncw ncw 16 Jul 2 17:46 /tmp/one-v2016-07-04-141003-000.txt Clean up all the old versions and show that they've gone. $ rclone -q cleanup b2:cleanup-test $ rclone -q ls b2:cleanup-test 9 one.txt $ rclone -q --b2-versions ls b2:cleanup-test 9 one.txt Data usage It is useful to know how many requests are sent to the server in different scenarios. All copy commands send the following 4 requests: /b2api/v1/b2_authorize_account /b2api/v1/b2_create_bucket /b2api/v1/b2_list_buckets /b2api/v1/b2_list_file_names The b2_list_file_names request will be sent once for every 1k files in the remote path, providing the checksum and modification time of the listed files. As of version 1.33 issue #818 causes extra requests to be sent when using B2 with Crypt. When a copy operation does not require any files to be uploaded, no more requests will be sent. Uploading files that do not require chunking, will send 2 requests per file upload: /b2api/v1/b2_get_upload_url /b2api/v1/b2_upload_file/ Uploading files requiring chunking, will send 2 requests (one each to start and finish the upload) and another 2 requests for each chunk: /b2api/v1/b2_start_large_file /b2api/v1/b2_get_upload_part_url /b2api/v1/b2_upload_part/ /b2api/v1/b2_finish_large_file Specific options Here are the command line options specific to this cloud storage system. --b2-chunk-size valuee=SIZE When uploading large files chunk the file into this size. Note that these chunks are buffered in memory and there might a maximum of --transfers chunks in progress at once. 5,000,000 Bytes is the minimim size (default 96M). --b2-upload-cutoff=SIZE Cutoff for switching to chunked upload (default 190.735 MiB == 200 MB). Files above this size will be uploaded in chunks of --b2-chunk-size. This value should be set no larger than 4.657GiB (== 5GB) as this is the largest file size that can be uploaded. --b2-test-mode=FLAG This is for debugging purposes only. Setting FLAG to one of the strings below will cause b2 to return specific errors for debugging purposes. - fail_some_uploads - expire_some_account_authorization_tokens - force_cap_exceeded These will be set in the X-Bz-Test-Mode header which is documented in the b2 integrations checklist. --b2-versions When set rclone will show and act on older versions of files. For example Listing without --b2-versions $ rclone -q ls b2:cleanup-test 9 one.txt And with $ rclone -q --b2-versions ls b2:cleanup-test 9 one.txt 8 one-v2016-07-04-141032-000.txt 16 one-v2016-07-04-141003-000.txt 15 one-v2016-07-02-155621-000.txt Showing that the current version is unchanged but older versions can be seen. These have the UTC date that they were uploaded to the server to the nearest millisecond appended to them. Note that when using --b2-versions no file write operations are permitted, so you can't upload files or delete them. Box Paths are specified as remote:path Paths may be as deep as required, eg remote:directory/subdirectory. The initial setup for Box involves getting a token from Box which you need to do in your browser. rclone config walks you through it. Here is an example of how to make a remote called remote. First run: rclone config This will guide you through an interactive setup process: No remotes found - make a new one n) New remote s) Set configuration password q) Quit config n/s/q> n name> remote Type of storage to configure. Choose a number from below, or type in your own value 1 / Amazon Drive \ "amazon cloud drive" 2 / Amazon S3 (also Dreamhost, Ceph, Minio) \ "s3" 3 / Backblaze B2 \ "b2" 4 / Box \ "box" 5 / Dropbox \ "dropbox" 6 / Encrypt/Decrypt a remote \ "crypt" 7 / FTP Connection \ "ftp" 8 / Google Cloud Storage (this is not Google Drive) \ "google cloud storage" 9 / Google Drive \ "drive" 10 / Hubic \ "hubic" 11 / Local Disk \ "local" 12 / Microsoft OneDrive \ "onedrive" 13 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH) \ "swift" 14 / SSH/SFTP Connection \ "sftp" 15 / Yandex Disk \ "yandex" 16 / http Connection \ "http" Storage> box Box App Client Id - leave blank normally. client_id> Box App Client Secret - leave blank normally. client_secret> Remote config Use auto config? * Say Y if not sure * Say N if you are working on a remote or headless machine y) Yes n) No y/n> y If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth Log in and authorize rclone for access Waiting for code... Got code -------------------- [remote] client_id = client_secret = token = {"access_token":"XXX","token_type":"bearer","refresh_token":"XXX","expiry":"XXX"} -------------------- y) Yes this is OK e) Edit this remote d) Delete this remote y/e/d> y See the remote setup docs for how to set it up on a machine with no Internet browser available. Note that rclone runs a webserver on your local machine to collect the token as returned from Box. This only runs from the moment it opens your browser to the moment you get back the verification code. This is on http://127.0.0.1:53682/ and this it may require you to unblock it temporarily if you are running a host firewall. Once configured you can then use rclone like this, List directories in top level of your Box rclone lsd remote: List all the files in your Box rclone ls remote: To copy a local directory to an Box directory called backup rclone copy /home/source remote:backup Invalid refresh token According to the box docs: Each refresh_token is valid for one use in 60 days. This means that if you - Don't use the box remote for 60 days - Copy the config file with a box refresh token in and use it in two places - Get an error on a token refresh then rclone will return an error which includes the text Invalid refresh token. To fix this you will need to use oauth2 again to update the refresh token. You can use the methods in the remote setup docs, bearing in mind that if you use the copy the config file method, you should not use that remote on the computer you did the authentication on. Here is how to do it. $ rclone config Current remotes: Name Type ==== ==== remote box e) Edit existing remote n) New remote d) Delete remote r) Rename remote c) Copy remote s) Set configuration password q) Quit config e/n/d/r/c/s/q> e Choose a number from below, or type in an existing value 1 > remote remote> remote -------------------- [remote] type = box token = {"access_token":"XXX","token_type":"bearer","refresh_token":"XXX","expiry":"2017-07-08T23:40:08.059167677+01:00"} -------------------- Edit remote Value "client_id" = "" Edit? (y/n)> y) Yes n) No y/n> n Value "client_secret" = "" Edit? (y/n)> y) Yes n) No y/n> n Remote config Already have a token - refresh? y) Yes n) No y/n> y Use auto config? * Say Y if not sure * Say N if you are working on a remote or headless machine y) Yes n) No y/n> y If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth Log in and authorize rclone for access Waiting for code... Got code -------------------- [remote] type = box token = {"access_token":"YYY","token_type":"bearer","refresh_token":"YYY","expiry":"2017-07-23T12:22:29.259137901+01:00"} -------------------- y) Yes this is OK e) Edit this remote d) Delete this remote y/e/d> y Modified time and hashes Box allows modification times to be set on objects accurate to 1 second. These will be used to detect whether objects need syncing or not. Box supports SHA1 type hashes, so you can use the --checksum flag. Transfers For files above 50MB rclone will use a chunked transfer. Rclone will upload up to --transfers chunks at the same time (shared among all the multipart uploads). Chunks are buffered in memory and are normally 8MB so increasing --transfers will increase memory use. Deleting files Depending on the enterprise settings for your user, the item will either be actually deleted from Box or moved to the trash. Specific options Here are the command line options specific to this cloud storage system. --box-upload-cutoff=SIZE Cutoff for switching to chunked upload - must be >= 50MB. The default is 50MB. --box-commit-retries int Max number of times to try committing a multipart file. (default 100) Limitations Note that Box is case insensitive so you can't have a file called "Hello.doc" and one called "hello.doc". Box file names can't have the \ character in. rclone maps this to and from an identical looking unicode equivalent ＼. Box only supports filenames up to 255 characters in length. Cache (BETA) The cache remote wraps another existing remote and stores file structure and its data for long running tasks like rclone mount. To get started you just need to have an existing remote which can be configured with cache. Here is an example of how to make a remote called test-cache. First run: rclone config This will guide you through an interactive setup process: No remotes found - make a new one n) New remote r) Rename remote c) Copy remote s) Set configuration password q) Quit config n/r/c/s/q> n name> test-cache Type of storage to configure. Choose a number from below, or type in your own value ... 5 / Cache a remote \ "cache" ... Storage> 5 Remote to cache. Normally should contain a ':' and a path, eg "myremote:path/to/dir", "myremote:bucket" or maybe "myremote:" (not recommended). remote> local:/test Optional: The URL of the Plex server plex_url> http://127.0.0.1:32400 Optional: The username of the Plex user plex_username> dummyusername Optional: The password of the Plex user y) Yes type in my own password g) Generate random password n) No leave this optional password blank y/g/n> y Enter the password: password: Confirm the password: password: The size of a chunk. Lower value good for slow connections but can affect seamless reading. Default: 5M Choose a number from below, or type in your own value 1 / 1MB \ "1m" 2 / 5 MB \ "5M" 3 / 10 MB \ "10M" chunk_size> 2 How much time should object info (file size, file hashes etc) be stored in cache. Use a very high value if you don't plan on changing the source FS from outside the cache. Accepted units are: "s", "m", "h". Default: 5m Choose a number from below, or type in your own value 1 / 1 hour \ "1h" 2 / 24 hours \ "24h" 3 / 24 hours \ "48h" info_age> 2 The maximum size of stored chunks. When the storage grows beyond this size, the oldest chunks will be deleted. Default: 10G Choose a number from below, or type in your own value 1 / 500 MB \ "500M" 2 / 1 GB \ "1G" 3 / 10 GB \ "10G" chunk_total_size> 3 Remote config -------------------- [test-cache] remote = local:/test plex_url = http://127.0.0.1:32400 plex_username = dummyusername plex_password = *** ENCRYPTED *** chunk_size = 5M info_age = 48h chunk_total_size = 10G You can then use it like this, List directories in top level of your drive rclone lsd test-cache: List all the files in your drive rclone ls test-cache: To start a cached mount rclone mount --allow-other test-cache: /var/tmp/test-cache Write Features Offline uploading In an effort to make writing through cache more reliable, the backend now supports this feature which can be activated by specifying a cache-tmp-upload-path. A files goes through these states when using this feature: 1. An upload is started (usually by copying a file on the cache remote) 2. When the copy to the temporary location is complete the file is part of the cached remote and looks and behaves like any other file (reading included) 3. After cache-tmp-wait-time passes and the file is next in line, rclone move is used to move the file to the cloud provider 4. Reading the file still works during the upload but most modifications on it will be prohibited 5. Once the move is complete the file is unlocked for modifications as it becomes as any other regular file 6. If the file is being read through cache when it's actually deleted from the temporary path then cache will simply swap the source to the cloud provider without interrupting the reading (small blip can happen though) Files are uploaded in sequence and only one file is uploaded at a time. Uploads will be stored in a queue and be processed based on the order they were added. The queue and the temporary storage is persistent across restarts and even purges of the cache. Write Support Writes are supported through cache. One caveat is that a mounted cache remote does not add any retry or fallback mechanism to the upload operation. This will depend on the implementation of the wrapped remote. Consider using Offline uploading for reliable writes. One special case is covered with cache-writes which will cache the file data at the same time as the upload when it is enabled making it available from the cache store immediately once the upload is finished. Read Features Multiple connections To counter the high latency between a local PC where rclone is running and cloud providers, the cache remote can split multiple requests to the cloud provider for smaller file chunks and combines them together locally where they can be available almost immediately before the reader usually needs them. This is similar to buffering when media files are played online. Rclone will stay around the current marker but always try its best to stay ahead and prepare the data before. Plex Integration There is a direct integration with Plex which allows cache to detect during reading if the file is in playback or not. This helps cache to adapt how it queries the cloud provider depending on what is needed for. Scans will have a minimum amount of workers (1) while in a confirmed playback cache will deploy the configured number of workers. This integration opens the doorway to additional performance improvements which will be explored in the near future. NOTE: If Plex options are not configured, cache will function with its configured options without adapting any of its settings. How to enable? Run rclone config and add all the Plex options (endpoint, username and password) in your remote and it will be automatically enabled. Affected settings: - cache-workers: _Configured value_ during confirmed playback or _1_ all the other times Known issues Mount and --dir-cache-time --dir-cache-time controls the first layer of directory caching which works at the mount layer. Being an independent caching mechanism from the cache backend, it will manage its own entries based on the configured time. To avoid getting in a scenario where dir cache has obsolete data and cache would have the correct one, try to set --dir-cache-time to a lower time than --cache-info-age. Default values are already configured in this way. Windows support - Experimental There are a couple of issues with Windows mount functionality that still require some investigations. It should be considered as experimental thus far as fixes come in for this OS. Most of the issues seem to be related to the difference between filesystems on Linux flavors and Windows as cache is heavily dependant on them. Any reports or feedback on how cache behaves on this OS is greatly appreciated. - https://github.com/ncw/rclone/issues/1935 - https://github.com/ncw/rclone/issues/1907 - https://github.com/ncw/rclone/issues/1834 Risk of throttling Future iterations of the cache backend will make use of the pooling functionality of the cloud provider to synchronize and at the same time make writing through it more tolerant to failures. There are a couple of enhancements in track to add these but in the meantime there is a valid concern that the expiring cache listings can lead to cloud provider throttles or bans due to repeated queries on it for very large mounts. Some recommendations: - don't use a very small interval for entry informations (--cache-info-age) - while writes aren't yet optimised, you can still write through cache which gives you the advantage of adding the file in the cache at the same time if configured to do so. Future enhancements: - https://github.com/ncw/rclone/issues/1937 - https://github.com/ncw/rclone/issues/1936 cache and crypt One common scenario is to keep your data encrypted in the cloud provider using the crypt remote. crypt uses a similar technique to wrap around an existing remote and handles this translation in a seamless way. There is an issue with wrapping the remotes in this order: CLOUD REMOTE -> CRYPT -> CACHE During testing, I experienced a lot of bans with the remotes in this order. I suspect it might be related to how crypt opens files on the cloud provider which makes it think we're downloading the full file instead of small chunks. Organizing the remotes in this order yelds better results: CLOUD REMOTE -> CACHE -> CRYPT Cache and Remote Control (--rc) Cache supports the new --rc mode in rclone and can be remote controlled through the following end points: By default, the listener is disabled if you do not add the flag. rc cache/expire Purge a remote from the cache backend. Supports either a directory or a file. It supports both encrypted and unencrypted file names if cache is wrapped by crypt. Params: - REMOTE = path to remote (REQUIRED) - WITHDATA = true/false to delete cached data (chunks) as well _(optional, false by default)_ Specific options Here are the command line options specific to this cloud storage system. --cache-db-path=PATH Path to where the file structure metadata (DB) is stored locally. The remote name is used as the DB file name. DEFAULT: /cache-backend/ EXAMPLE: /.cache/cache-backend/test-cache --cache-chunk-path=PATH Path to where partial file data (chunks) is stored locally. The remote name is appended to the final path. This config follows the --cache-db-path. If you specify a custom location for --cache-db-path and don't specify one for --cache-chunk-path then --cache-chunk-path will use the same path as --cache-db-path. DEFAULT: /cache-backend/ EXAMPLE: /.cache/cache-backend/test-cache --cache-db-purge Flag to clear all the cached data for this remote before. DEFAULT: not set --cache-chunk-size=SIZE The size of a chunk (partial file data). Use lower numbers for slower connections. If the chunk size is changed, any downloaded chunks will be invalid and cache-chunk-path will need to be cleared or unexpected EOF errors will occur. DEFAULT: 5M --cache-total-chunk-size=SIZE The total size that the chunks can take up on the local disk. If cache exceeds this value then it will start to the delete the oldest chunks until it goes under this value. DEFAULT: 10G --cache-chunk-clean-interval=DURATION How often should cache perform cleanups of the chunk storage. The default value should be ok for most people. If you find that cache goes over cache-total-chunk-size too often then try to lower this value to force it to perform cleanups more often. DEFAULT: 1m --cache-info-age=DURATION How long to keep file structure information (directory listings, file size, mod times etc) locally. If all write operations are done through cache then you can safely make this value very large as the cache store will also be updated in real time. DEFAULT: 6h --cache-read-retries=RETRIES How many times to retry a read from a cache storage. Since reading from a cache stream is independent from downloading file data, readers can get to a point where there's no more data in the cache. Most of the times this can indicate a connectivity issue if cache isn't able to provide file data anymore. For really slow connections, increase this to a point where the stream is able to provide data but your experience will be very stuttering. DEFAULT: 10 --cache-workers=WORKERS How many workers should run in parallel to download chunks. Higher values will mean more parallel processing (better CPU needed) and more concurrent requests on the cloud provider. This impacts several aspects like the cloud provider API limits, more stress on the hardware that rclone runs on but it also means that streams will be more fluid and data will be available much more faster to readers. NOTE: If the optional Plex integration is enabled then this setting will adapt to the type of reading performed and the value specified here will be used as a maximum number of workers to use. DEFAULT: 4 --cache-chunk-no-memory By default, cache will keep file data during streaming in RAM as well to provide it to readers as fast as possible. This transient data is evicted as soon as it is read and the number of chunks stored doesn't exceed the number of workers. However, depending on other settings like cache-chunk-size and cache-workers this footprint can increase if there are parallel streams too (multiple files being read at the same time). If the hardware permits it, use this feature to provide an overall better performance during streaming but it can also be disabled if RAM is not available on the local machine. DEFAULT: not set --cache-rps=NUMBER This setting places a hard limit on the number of requests per second that cache will be doing to the cloud provider remote and try to respect that value by setting waits between reads. If you find that you're getting banned or limited on the cloud provider through cache and know that a smaller number of requests per second will allow you to work with it then you can use this setting for that. A good balance of all the other settings should make this setting useless but it is available to set for more special cases. NOTE: This will limit the number of requests during streams but other API calls to the cloud provider like directory listings will still pass. DEFAULT: disabled --cache-writes If you need to read files immediately after you upload them through cache you can enable this flag to have their data stored in the cache store at the same time during upload. DEFAULT: not set --cache-tmp-upload-path=PATH This is the path where cache will use as a temporary storage for new files that need to be uploaded to the cloud provider. Specifying a value will enable this feature. Without it, it is completely disabled and files will be uploaded directly to the cloud provider DEFAULT: empty --cache-tmp-wait-time=DURATION This is the duration that a file must wait in the temporary location _cache-tmp-upload-path_ before it is selected for upload. Note that only one file is uploaded at a time and it can take longer to start the upload if a queue formed for this purpose. DEFAULT: 15m --cache-db-wait-time=DURATION Only one process can have the DB open at any one time, so rclone waits for this duration for the DB to become available before it gives an error. If you set it to 0 then it will wait forever. DEFAULT: 1s Crypt The crypt remote encrypts and decrypts another remote. To use it first set up the underlying remote following the config instructions for that remote. You can also use a local pathname instead of a remote which will encrypt and decrypt from that directory which might be useful for encrypting onto a USB stick for example. First check your chosen remote is working - we'll call it remote:path in these docs. Note that anything inside remote:path will be encrypted and anything outside won't. This means that if you are using a bucket based remote (eg S3, B2, swift) then you should probably put the bucket in the remote s3:bucket. If you just use s3: then rclone will make encrypted bucket names too (if using file name encryption) which may or may not be what you want. Now configure crypt using rclone config. We will call this one secret to differentiate it from the remote. No remotes found - make a new one n) New remote s) Set configuration password q) Quit config n/s/q> n name> secret Type of storage to configure. Choose a number from below, or type in your own value 1 / Amazon Drive \ "amazon cloud drive" 2 / Amazon S3 (also Dreamhost, Ceph, Minio) \ "s3" 3 / Backblaze B2 \ "b2" 4 / Dropbox \ "dropbox" 5 / Encrypt/Decrypt a remote \ "crypt" 6 / Google Cloud Storage (this is not Google Drive) \ "google cloud storage" 7 / Google Drive \ "drive" 8 / Hubic \ "hubic" 9 / Local Disk \ "local" 10 / Microsoft OneDrive \ "onedrive" 11 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH) \ "swift" 12 / SSH/SFTP Connection \ "sftp" 13 / Yandex Disk \ "yandex" Storage> 5 Remote to encrypt/decrypt. Normally should contain a ':' and a path, eg "myremote:path/to/dir", "myremote:bucket" or maybe "myremote:" (not recommended). remote> remote:path How to encrypt the filenames. Choose a number from below, or type in your own value 1 / Don't encrypt the file names. Adds a ".bin" extension only. \ "off" 2 / Encrypt the filenames see the docs for the details. \ "standard" 3 / Very simple filename obfuscation. \ "obfuscate" filename_encryption> 2 Option to either encrypt directory names or leave them intact. Choose a number from below, or type in your own value 1 / Encrypt directory names. \ "true" 2 / Don't encrypt directory names, leave them intact. \ "false" filename_encryption> 1 Password or pass phrase for encryption. y) Yes type in my own password g) Generate random password y/g> y Enter the password: password: Confirm the password: password: Password or pass phrase for salt. Optional but recommended. Should be different to the previous password. y) Yes type in my own password g) Generate random password n) No leave this optional password blank y/g/n> g Password strength in bits. 64 is just about memorable 128 is secure 1024 is the maximum Bits> 128 Your password is: JAsJvRcgR-_veXNfy_sGmQ Use this password? y) Yes n) No y/n> y Remote config -------------------- [secret] remote = remote:path filename_encryption = standard password = *** ENCRYPTED *** password2 = *** ENCRYPTED *** -------------------- y) Yes this is OK e) Edit this remote d) Delete this remote y/e/d> y IMPORTANT The password is stored in the config file is lightly obscured so it isn't immediately obvious what it is. It is in no way secure unless you use config file encryption. A long passphrase is recommended, or you can use a random one. Note that if you reconfigure rclone with the same passwords/passphrases elsewhere it will be compatible - all the secrets used are derived from those two passwords/passphrases. Note that rclone does not encrypt - file length - this can be calcuated within 16 bytes - modification time - used for syncing Specifying the remote In normal use, make sure the remote has a : in. If you specify the remote without a : then rclone will use a local directory of that name. So if you use a remote of /path/to/secret/files then rclone will encrypt stuff to that directory. If you use a remote of name then rclone will put files in a directory called name in the current directory. If you specify the remote as remote:path/to/dir then rclone will store encrypted files in path/to/dir on the remote. If you are using file name encryption, then when you save files to secret:subdir/subfile this will store them in the unencrypted path path/to/dir but the subdir/subpath bit will be encrypted. Note that unless you want encrypted bucket names (which are difficult to manage because you won't know what directory they represent in web interfaces etc), you should probably specify a bucket, eg remote:secretbucket when using bucket based remotes such as S3, Swift, Hubic, B2, GCS. Example To test I made a little directory of files using "standard" file name encryption. plaintext/ ├── file0.txt ├── file1.txt └── subdir ├── file2.txt ├── file3.txt └── subsubdir └── file4.txt Copy these to the remote and list them back $ rclone -q copy plaintext secret: $ rclone -q ls secret: 7 file1.txt 6 file0.txt 8 subdir/file2.txt 10 subdir/subsubdir/file4.txt 9 subdir/file3.txt Now see what that looked like when encrypted $ rclone -q ls remote:path 55 hagjclgavj2mbiqm6u6cnjjqcg 54 v05749mltvv1tf4onltun46gls 57 86vhrsv86mpbtd3a0akjuqslj8/dlj7fkq4kdq72emafg7a7s41uo 58 86vhrsv86mpbtd3a0akjuqslj8/7uu829995du6o42n32otfhjqp4/b9pausrfansjth5ob3jkdqd4lc 56 86vhrsv86mpbtd3a0akjuqslj8/8njh1sk437gttmep3p70g81aps Note that this retains the directory structure which means you can do this $ rclone -q ls secret:subdir 8 file2.txt 9 file3.txt 10 subsubdir/file4.txt If don't use file name encryption then the remote will look like this - note the .bin extensions added to prevent the cloud provider attempting to interpret the data. $ rclone -q ls remote:path 54 file0.txt.bin 57 subdir/file3.txt.bin 56 subdir/file2.txt.bin 58 subdir/subsubdir/file4.txt.bin 55 file1.txt.bin File name encryption modes Here are some of the features of the file name encryption modes Off - doesn't hide file names or directory structure - allows for longer file names (~246 characters) - can use sub paths and copy single files Standard - file names encrypted - file names can't be as long (~143 characters) - can use sub paths and copy single files - directory structure visible - identical files names will have identical uploaded names - can use shortcuts to shorten the directory recursion Obfuscation This is a simple "rotate" of the filename, with each file having a rot distance based on the filename. We store the distance at the beginning of the filename. So a file called "hello" may become "53.jgnnq" This is not a strong encryption of filenames, but it may stop automated scanning tools from picking up on filename patterns. As such it's an intermediate between "off" and "standard". The advantage is that it allows for longer path segment names. There is a possibility with some unicode based filenames that the obfuscation is weak and may map lower case characters to upper case equivalents. You can not rely on this for strong protection. - file names very lightly obfuscated - file names can be longer than standard encryption - can use sub paths and copy single files - directory structure visible - identical files names will have identical uploaded names Cloud storage systems have various limits on file name length and total path length which you are more likely to hit using "Standard" file name encryption. If you keep your file names to below 156 characters in length then you should be OK on all providers. There may be an even more secure file name encryption mode in the future which will address the long file name problem. Directory name encryption Crypt offers the option of encrypting dir names or leaving them intact. There are two options: True Encrypts the whole file path including directory names Example: 1/12/123.txt is encrypted to p0e52nreeaj0a5ea7s64m4j72s/l42g6771hnv3an9cgc8cr2n1ng/qgm4avr35m5loi1th53ato71v0 False Only encrypts file names, skips directory names Example: 1/12/123.txt is encrypted to 1/12/qgm4avr35m5loi1th53ato71v0 Modified time and hashes Crypt stores modification times using the underlying remote so support depends on that. Hashes are not stored for crypt. However the data integrity is protected by an extremely strong crypto authenticator. Note that you should use the rclone cryptcheck command to check the integrity of a crypted remote instead of rclone check which can't check the checksums properly. Specific options Here are the command line options specific to this cloud storage system. --crypt-show-mapping If this flag is set then for each file that the remote is asked to list, it will log (at level INFO) a line stating the decrypted file name and the encrypted file name. This is so you can work out which encrypted names are which decrypted names just in case you need to do something with the encrypted file names, or for debugging purposes. Backing up a crypted remote If you wish to backup a crypted remote, it it recommended that you use rclone sync on the encrypted files, and make sure the passwords are the same in the new encrypted remote. This will have the following advantages - rclone sync will check the checksums while copying - you can use rclone check between the encrypted remotes - you don't decrypt and encrypt unnecessarily For example, let's say you have your original remote at remote: with the encrypted version at eremote: with path remote:crypt. You would then set up the new remote remote2: and then the encrypted version eremote2: with path remote2:crypt using the same passwords as eremote:. To sync the two remotes you would do rclone sync remote:crypt remote2:crypt And to check the integrity you would do rclone check remote:crypt remote2:crypt File formats File encryption Files are encrypted 1:1 source file to destination object. The file has a header and is divided into chunks. Header - 8 bytes magic string RCLONE\x00\x00 - 24 bytes Nonce (IV) The initial nonce is generated from the operating systems crypto strong random number generator. The nonce is incremented for each chunk read making sure each nonce is unique for each block written. The chance of a nonce being re-used is minuscule. If you wrote an exabyte of data (10¹⁸ bytes) you would have a probability of approximately 2×10⁻³² of re-using a nonce. Chunk Each chunk will contain 64kB of data, except for the last one which may have less data. The data chunk is in standard NACL secretbox format. Secretbox uses XSalsa20 and Poly1305 to encrypt and authenticate messages. Each chunk contains: - 16 Bytes of Poly1305 authenticator - 1 - 65536 bytes XSalsa20 encrypted data 64k chunk size was chosen as the best performing chunk size (the authenticator takes too much time below this and the performance drops off due to cache effects above this). Note that these chunks are buffered in memory so they can't be too big. This uses a 32 byte (256 bit key) key derived from the user password. Examples 1 byte file will encrypt to - 32 bytes header - 17 bytes data chunk 49 bytes total 1MB (1048576 bytes) file will encrypt to - 32 bytes header - 16 chunks of 65568 bytes 1049120 bytes total (a 0.05% overhead). This is the overhead for big files. Name encryption File names are encrypted segment by segment - the path is broken up into / separated strings and these are encrypted individually. File segments are padded using using PKCS#7 to a multiple of 16 bytes before encryption. They are then encrypted with EME using AES with 256 bit key. EME (ECB-Mix-ECB) is a wide-block encryption mode presented in the 2003 paper "A Parallelizable Enciphering Mode" by Halevi and Rogaway. This makes for deterministic encryption which is what we want - the same filename must encrypt to the same thing otherwise we can't find it on the cloud storage system. This means that - filenames with the same name will encrypt the same - filenames which start the same won't have a common prefix This uses a 32 byte key (256 bits) and a 16 byte (128 bits) IV both of which are derived from the user password. After encryption they are written out using a modified version of standard base32 encoding as described in RFC4648. The standard encoding is modified in two ways: - it becomes lower case (no-one likes upper case filenames!) - we strip the padding character = base32 is used rather than the more efficient base64 so rclone can be used on case insensitive remotes (eg Windows, Amazon Drive). Key derivation Rclone uses scrypt with parameters N=16384, r=8, p=1 with an optional user supplied salt (password2) to derive the 32+32+16 = 80 bytes of key material required. If the user doesn't supply a salt then rclone uses an internal one. scrypt makes it impractical to mount a dictionary attack on rclone encrypted data. For full protection against this you should always use a salt. Dropbox Paths are specified as remote:path Dropbox paths may be as deep as required, eg remote:directory/subdirectory. The initial setup for dropbox involves getting a token from Dropbox which you need to do in your browser. rclone config walks you through it. Here is an example of how to make a remote called remote. First run: rclone config This will guide you through an interactive setup process: n) New remote d) Delete remote q) Quit config e/n/d/q> n name> remote Type of storage to configure. Choose a number from below, or type in your own value 1 / Amazon Drive \ "amazon cloud drive" 2 / Amazon S3 (also Dreamhost, Ceph, Minio) \ "s3" 3 / Backblaze B2 \ "b2" 4 / Dropbox \ "dropbox" 5 / Encrypt/Decrypt a remote \ "crypt" 6 / Google Cloud Storage (this is not Google Drive) \ "google cloud storage" 7 / Google Drive \ "drive" 8 / Hubic \ "hubic" 9 / Local Disk \ "local" 10 / Microsoft OneDrive \ "onedrive" 11 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH) \ "swift" 12 / SSH/SFTP Connection \ "sftp" 13 / Yandex Disk \ "yandex" Storage> 4 Dropbox App Key - leave blank normally. app_key> Dropbox App Secret - leave blank normally. app_secret> Remote config Please visit: https://www.dropbox.com/1/oauth2/authorize?client_id=XXXXXXXXXXXXXXX&response_type=code Enter the code: XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX_XXXXXXXXXX -------------------- [remote] app_key = app_secret = token = XXXXXXXXXXXXXXXXXXXXXXXXXXXXX_XXXX_XXXXXXXXXXXXXXXXXXXXXXXXXXXXX -------------------- y) Yes this is OK e) Edit this remote d) Delete this remote y/e/d> y You can then use it like this, List directories in top level of your dropbox rclone lsd remote: List all the files in your dropbox rclone ls remote: To copy a local directory to a dropbox directory called backup rclone copy /home/source remote:backup Dropbox for business Rclone supports Dropbox for business and Team Folders. When using Dropbox for business remote: and remote:path/to/file will refer to your personal folder. If you wish to see Team Folders you must use a leading / in the path, so rclone lsd remote:/ will refer to the root and show you all Team Folders and your User Folder. You can then use team folders like this remote:/TeamFolder and remote:/TeamFolder/path/to/file. A leading / for a Dropbox personal account will do nothing, but it will take an extra HTTP transaction so it should be avoided. Modified time and Hashes Dropbox supports modified times, but the only way to set a modification time is to re-upload the file. This means that if you uploaded your data with an older version of rclone which didn't support the v2 API and modified times, rclone will decide to upload all your old data to fix the modification times. If you don't want this to happen use --size-only or --checksum flag to stop it. Dropbox supports its own hash type which is checked for all transfers. Specific options Here are the command line options specific to this cloud storage system. --dropbox-chunk-size=SIZE Any files larger than this will be uploaded in chunks of this size. The default is 48MB. The maximum is 150MB. Note that chunks are buffered in memory (one at a time) so rclone can deal with retries. Setting this larger will increase the speed slightly (at most 10% for 128MB in tests) at the cost of using more memory. It can be set smaller if you are tight on memory. Limitations Note that Dropbox is case insensitive so you can't have a file called "Hello.doc" and one called "hello.doc". There are some file names such as thumbs.db which Dropbox can't store. There is a full list of them in the "Ignored Files" section of this document. Rclone will issue an error message File name disallowed - not uploading if it attempts to upload one of those file names, but the sync won't fail. If you have more than 10,000 files in a directory then rclone purge dropbox:dir will return the error Failed to purge: There are too many files involved in this operation. As a work-around do an rclone delete dropbox:dir followed by an rclone rmdir dropbox:dir. FTP FTP is the File Transfer Protocol. FTP support is provided using the github.com/jlaffaye/ftp package. Here is an example of making an FTP configuration. First run rclone config This will guide you through an interactive setup process. An FTP remote only needs a host together with and a username and a password. With anonymous FTP server, you will need to use anonymous as username and your email address as the password. No remotes found - make a new one n) New remote r) Rename remote c) Copy remote s) Set configuration password q) Quit config n/r/c/s/q> n name> remote Type of storage to configure. Choose a number from below, or type in your own value 1 / Amazon Drive \ "amazon cloud drive" 2 / Amazon S3 (also Dreamhost, Ceph, Minio) \ "s3" 3 / Backblaze B2 \ "b2" 4 / Dropbox \ "dropbox" 5 / Encrypt/Decrypt a remote \ "crypt" 6 / FTP Connection \ "ftp" 7 / Google Cloud Storage (this is not Google Drive) \ "google cloud storage" 8 / Google Drive \ "drive" 9 / Hubic \ "hubic" 10 / Local Disk \ "local" 11 / Microsoft OneDrive \ "onedrive" 12 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH) \ "swift" 13 / SSH/SFTP Connection \ "sftp" 14 / Yandex Disk \ "yandex" Storage> ftp FTP host to connect to Choose a number from below, or type in your own value 1 / Connect to ftp.example.com \ "ftp.example.com" host> ftp.example.com FTP username, leave blank for current username, ncw user> FTP port, leave blank to use default (21) port> FTP password y) Yes type in my own password g) Generate random password y/g> y Enter the password: password: Confirm the password: password: Remote config -------------------- [remote] host = ftp.example.com user = port = pass = *** ENCRYPTED *** -------------------- y) Yes this is OK e) Edit this remote d) Delete this remote y/e/d> y This remote is called remote and can now be used like this See all directories in the home directory rclone lsd remote: Make a new directory rclone mkdir remote:path/to/directory List the contents of a directory rclone ls remote:path/to/directory Sync /home/local/directory to the remote directory, deleting any excess files in the directory. rclone sync /home/local/directory remote:directory Modified time FTP does not support modified times. Any times you see on the server will be time of upload. Checksums FTP does not support any checksums. Limitations Note that since FTP isn't HTTP based the following flags don't work with it: --dump-headers, --dump-bodies, --dump-auth Note that --timeout isn't supported (but --contimeout is). Note that --bind isn't supported. FTP could support server side move but doesn't yet. Google Cloud Storage Paths are specified as remote:bucket (or remote: for the lsd command.) You may put subdirectories in too, eg remote:bucket/path/to/dir. The initial setup for google cloud storage involves getting a token from Google Cloud Storage which you need to do in your browser. rclone config walks you through it. Here is an example of how to make a remote called remote. First run: rclone config This will guide you through an interactive setup process: n) New remote d) Delete remote q) Quit config e/n/d/q> n name> remote Type of storage to configure. Choose a number from below, or type in your own value 1 / Amazon Drive \ "amazon cloud drive" 2 / Amazon S3 (also Dreamhost, Ceph, Minio) \ "s3" 3 / Backblaze B2 \ "b2" 4 / Dropbox \ "dropbox" 5 / Encrypt/Decrypt a remote \ "crypt" 6 / Google Cloud Storage (this is not Google Drive) \ "google cloud storage" 7 / Google Drive \ "drive" 8 / Hubic \ "hubic" 9 / Local Disk \ "local" 10 / Microsoft OneDrive \ "onedrive" 11 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH) \ "swift" 12 / SSH/SFTP Connection \ "sftp" 13 / Yandex Disk \ "yandex" Storage> 6 Google Application Client Id - leave blank normally. client_id> Google Application Client Secret - leave blank normally. client_secret> Project number optional - needed only for list/create/delete buckets - see your developer console. project_number> 12345678 Service Account Credentials JSON file path - needed only if you want use SA instead of interactive login. service_account_file> Access Control List for new objects. Choose a number from below, or type in your own value 1 / Object owner gets OWNER access, and all Authenticated Users get READER access. \ "authenticatedRead" 2 / Object owner gets OWNER access, and project team owners get OWNER access. \ "bucketOwnerFullControl" 3 / Object owner gets OWNER access, and project team owners get READER access. \ "bucketOwnerRead" 4 / Object owner gets OWNER access [default if left blank]. \ "private" 5 / Object owner gets OWNER access, and project team members get access according to their roles. \ "projectPrivate" 6 / Object owner gets OWNER access, and all Users get READER access. \ "publicRead" object_acl> 4 Access Control List for new buckets. Choose a number from below, or type in your own value 1 / Project team owners get OWNER access, and all Authenticated Users get READER access. \ "authenticatedRead" 2 / Project team owners get OWNER access [default if left blank]. \ "private" 3 / Project team members get access according to their roles. \ "projectPrivate" 4 / Project team owners get OWNER access, and all Users get READER access. \ "publicRead" 5 / Project team owners get OWNER access, and all Users get WRITER access. \ "publicReadWrite" bucket_acl> 2 Location for the newly created buckets. Choose a number from below, or type in your own value 1 / Empty for default location (US). \ "" 2 / Multi-regional location for Asia. \ "asia" 3 / Multi-regional location for Europe. \ "eu" 4 / Multi-regional location for United States. \ "us" 5 / Taiwan. \ "asia-east1" 6 / Tokyo. \ "asia-northeast1" 7 / Singapore. \ "asia-southeast1" 8 / Sydney. \ "australia-southeast1" 9 / Belgium. \ "europe-west1" 10 / London. \ "europe-west2" 11 / Iowa. \ "us-central1" 12 / South Carolina. \ "us-east1" 13 / Northern Virginia. \ "us-east4" 14 / Oregon. \ "us-west1" location> 12 The storage class to use when storing objects in Google Cloud Storage. Choose a number from below, or type in your own value 1 / Default \ "" 2 / Multi-regional storage class \ "MULTI_REGIONAL" 3 / Regional storage class \ "REGIONAL" 4 / Nearline storage class \ "NEARLINE" 5 / Coldline storage class \ "COLDLINE" 6 / Durable reduced availability storage class \ "DURABLE_REDUCED_AVAILABILITY" storage_class> 5 Remote config Use auto config? * Say Y if not sure * Say N if you are working on a remote or headless machine or Y didn't work y) Yes n) No y/n> y If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth Log in and authorize rclone for access Waiting for code... Got code -------------------- [remote] type = google cloud storage client_id = client_secret = token = {"AccessToken":"xxxx.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx-xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","RefreshToken":"x/xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx_xxxxxxxxx","Expiry":"2014-07-17T20:49:14.929208288+01:00","Extra":null} project_number = 12345678 object_acl = private bucket_acl = private -------------------- y) Yes this is OK e) Edit this remote d) Delete this remote y/e/d> y Note that rclone runs a webserver on your local machine to collect the token as returned from Google if you use auto config mode. This only runs from the moment it opens your browser to the moment you get back the verification code. This is on http://127.0.0.1:53682/ and this it may require you to unblock it temporarily if you are running a host firewall, or use manual mode. This remote is called remote and can now be used like this See all the buckets in your project rclone lsd remote: Make a new bucket rclone mkdir remote:bucket List the contents of a bucket rclone ls remote:bucket Sync /home/local/directory to the remote bucket, deleting any excess files in the bucket. rclone sync /home/local/directory remote:bucket Service Account support You can set up rclone with Google Cloud Storage in an unattended mode, i.e. not tied to a specific end-user Google account. This is useful when you want to synchronise files onto machines that don't have actively logged-in users, for example build machines. To get credentials for Google Cloud Platform IAM Service Accounts, please head to the Service Account section of the Google Developer Console. Service Accounts behave just like normal User permissions in Google Cloud Storage ACLs, so you can limit their access (e.g. make them read only). After creating an account, a JSON file containing the Service Account's credentials will be downloaded onto your machines. These credentials are what rclone will use for authentication. To use a Service Account instead of OAuth2 token flow, enter the path to your Service Account credentials at the service_account_file prompt and rclone won't use the browser based authentication flow. If you'd rather stuff the contents of the credentials file into the rclone config file, you can set service_account_credentials with the actual contents of the file instead, or set the equivalent environment variable. --fast-list This remote supports --fast-list which allows you to use fewer transactions in exchange for more memory. See the rclone docs for more details. Modified time Google google cloud storage stores md5sums natively and rclone stores modification times as metadata on the object, under the "mtime" key in RFC3339 format accurate to 1ns. Google Drive Paths are specified as drive:path Drive paths may be as deep as required, eg drive:directory/subdirectory. The initial setup for drive involves getting a token from Google drive which you need to do in your browser. rclone config walks you through it. Here is an example of how to make a remote called remote. First run: rclone config This will guide you through an interactive setup process: No remotes found - make a new one n) New remote r) Rename remote c) Copy remote s) Set configuration password q) Quit config n/r/c/s/q> n name> remote Type of storage to configure. Choose a number from below, or type in your own value [snip] 10 / Google Drive \ "drive" [snip] Storage> drive Google Application Client Id - leave blank normally. client_id> Google Application Client Secret - leave blank normally. client_secret> Scope that rclone should use when requesting access from drive. Choose a number from below, or type in your own value 1 / Full access all files, excluding Application Data Folder. \ "drive" 2 / Read-only access to file metadata and file contents. \ "drive.readonly" / Access to files created by rclone only. 3 | These are visible in the drive website. | File authorization is revoked when the user deauthorizes the app. \ "drive.file" / Allows read and write access to the Application Data folder. 4 | This is not visible in the drive website. \ "drive.appfolder" / Allows read-only access to file metadata but 5 | does not allow any access to read or download file content. \ "drive.metadata.readonly" scope> 1 ID of the root folder - leave blank normally. Fill in to access "Computers" folders. (see docs). root_folder_id> Service Account Credentials JSON file path - needed only if you want use SA instead of interactive login. service_account_file> Remote config Use auto config? * Say Y if not sure * Say N if you are working on a remote or headless machine or Y didn't work y) Yes n) No y/n> y If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth Log in and authorize rclone for access Waiting for code... Got code Configure this as a team drive? y) Yes n) No y/n> n -------------------- [remote] client_id = client_secret = scope = drive root_folder_id = service_account_file = token = {"access_token":"XXX","token_type":"Bearer","refresh_token":"XXX","expiry":"2014-03-16T13:57:58.955387075Z"} -------------------- y) Yes this is OK e) Edit this remote d) Delete this remote y/e/d> y Note that rclone runs a webserver on your local machine to collect the token as returned from Google if you use auto config mode. This only runs from the moment it opens your browser to the moment you get back the verification code. This is on http://127.0.0.1:53682/ and this it may require you to unblock it temporarily if you are running a host firewall, or use manual mode. You can then use it like this, List directories in top level of your drive rclone lsd remote: List all the files in your drive rclone ls remote: To copy a local directory to a drive directory called backup rclone copy /home/source remote:backup Scopes Rclone allows you to select which scope you would like for rclone to use. This changes what type of token is granted to rclone. The scopes are defined here.. The scope are drive This is the default scope and allows full access to all files, except for the Application Data Folder (see below). Choose this one if you aren't sure. drive.readonly This allows read only access to all files. Files may be listed and downloaded but not uploaded, renamed or deleted. drive.file With this scope rclone can read/view/modify only those files and folders it creates. So if you uploaded files to drive via the web interface (or any other means) they will not be visible to rclone. This can be useful if you are using rclone to backup data and you want to be sure confidential data on your drive is not visible to rclone. Files created with this scope are visible in the web interface. drive.appfolder This gives rclone its own private area to store files. Rclone will not be able to see any other files on your drive and you won't be able to see rclone's files from the web interface either. drive.metadata.readonly This allows read only access to file names only. It does not allow rclone to download or upload data, or rename or delete files or directories. Root folder ID You can set the root_folder_id for rclone. This is the directory (identified by its Folder ID) that rclone considers to be a the root of your drive. Normally you will leave this blank and rclone will determine the correct root to use itself. However you can set this to restrict rclone to a specific folder hierarchy or to access data within the "Computers" tab on the drive web interface (where files from Google's Backup and Sync desktop program go). In order to do this you will have to find the Folder ID of the directory you wish rclone to display. This will be the last segment of the URL when you open the relevant folder in the drive web interface. So if the folder you want rclone to use has a URL which looks like https://drive.google.com/drive/folders/1XyfxxxxxxxxxxxxxxxxxxxxxxxxxKHCh in the browser, then you use 1XyfxxxxxxxxxxxxxxxxxxxxxxxxxKHCh as the root_folder_id in the config. NB folders under the "Computers" tab seem to be read only (drive gives a 500 error) when using rclone. There doesn't appear to be an API to discover the folder IDs of the "Computers" tab - please contact us if you know otherwise! Note also that rclone can't access any data under the "Backups" tab on the google drive web interface yet. Service Account support You can set up rclone with Google Drive in an unattended mode, i.e. not tied to a specific end-user Google account. This is useful when you want to synchronise files onto machines that don't have actively logged-in users, for example build machines. To use a Service Account instead of OAuth2 token flow, enter the path to your Service Account credentials at the service_account_file prompt during rclone config and rclone won't use the browser based authentication flow. If you'd rather stuff the contents of the credentials file into the rclone config file, you can set service_account_credentials with the actual contents of the file instead, or set the equivalent environment variable. Use case - Google Apps/G-suite account and individual Drive Let's say that you are the administrator of a Google Apps (old) or G-suite account. The goal is to store data on an individual's Drive account, who IS a member of the domain. We'll call the domain EXAMPLE.COM, and the user FOO@EXAMPLE.COM. There's a few steps we need to go through to accomplish this: 1. Create a service account for example.com - To create a service account and obtain its credentials, go to the Google Developer Console. - You must have a project - create one if you don't. - Then go to "IAM & admin" -> "Service Accounts". - Use the "Create Credentials" button. Fill in "Service account name" with something that identifies your client. "Role" can be empty. - Tick "Furnish a new private key" - select "Key type JSON". - Tick "Enable G Suite Domain-wide Delegation". This option makes "impersonation" possible, as documented here: Delegating domain-wide authority to the service account - These credentials are what rclone will use for authentication. If you ever need to remove access, press the "Delete service account key" button. 2. Allowing API access to example.com Google Drive - Go to example.com's admin console - Go into "Security" (or use the search bar) - Select "Show more" and then "Advanced settings" - Select "Manage API client access" in the "Authentication" section - In the "Client Name" field enter the service account's "Client ID" - this can be found in the Developer Console under "IAM & Admin" -> "Service Accounts", then "View Client ID" for the newly created service account. It is a ~21 character numerical string. - In the next field, "One or More API Scopes", enter https://www.googleapis.com/auth/drive to grant access to Google Drive specifically. 3. Configure rclone, assuming a new install rclone config n/s/q> n # New name>gdrive # Gdrive is an example name Storage> # Select the number shown for Google Drive client_id> # Can be left blank client_secret> # Can be left blank scope> # Select your scope, 1 for example root_folder_id> # Can be left blank service_account_file> /home/foo/myJSONfile.json # This is where the JSON file goes! y/n> # Auto config, y 4. Verify that it's working - rclone -v --drive-impersonate foo@example.com lsf gdrive:backup - The arguments do: - -v - verbose logging - --drive-impersonate foo@example.com - this is what does the magic, pretending to be user foo. - lsf - list files in a parsing friendly way - gdrive:backup - use the remote called gdrive, work in the folder named backup. Team drives If you want to configure the remote to point to a Google Team Drive then answer y to the question Configure this as a team drive?. This will fetch the list of Team Drives from google and allow you to configure which one you want to use. You can also type in a team drive ID if you prefer. For example: Configure this as a team drive? y) Yes n) No y/n> y Fetching team drive list... Choose a number from below, or type in your own value 1 / Rclone Test \ "xxxxxxxxxxxxxxxxxxxx" 2 / Rclone Test 2 \ "yyyyyyyyyyyyyyyyyyyy" 3 / Rclone Test 3 \ "zzzzzzzzzzzzzzzzzzzz" Enter a Team Drive ID> 1 -------------------- [remote] client_id = client_secret = token = {"AccessToken":"xxxx.x.xxxxx_xxxxxxxxxxx_xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","RefreshToken":"1/xxxxxxxxxxxxxxxx_xxxxxxxxxxxxxxxxxxxxxxxxxx","Expiry":"2014-03-16T13:57:58.955387075Z","Extra":null} team_drive = xxxxxxxxxxxxxxxxxxxx -------------------- y) Yes this is OK e) Edit this remote d) Delete this remote y/e/d> y --fast-list This remote supports --fast-list which allows you to use fewer transactions in exchange for more memory. See the rclone docs for more details. It does this by combining multiple list calls into a single API request. This works by combining many '%s' in parents filters into one expression. To list the contents of directories a, b and c, the the following requests will be send by the regular List function: trashed=false and 'a' in parents trashed=false and 'b' in parents trashed=false and 'c' in parents These can now be combined into a single request: trashed=false and ('a' in parents or 'b' in parents or 'c' in parents) The implementation of ListR will put up to 50 parents filters into one request. It will use the --checkers value to specify the number of requests to run in parallel. In tests, these batch requests were up to 20x faster than the regular method. Running the following command against different sized folders gives: rclone lsjson -vv -R --checkers=6 gdrive:folder small folder (220 directories, 700 files): - without --fast-list: 38s - with --fast-list: 10s large folder (10600 directories, 39000 files): - without --fast-list: 22:05 min - with --fast-list: 58s Modified time Google drive stores modification times accurate to 1 ms. Revisions Google drive stores revisions of files. When you upload a change to an existing file to google drive using rclone it will create a new revision of that file. Revisions follow the standard google policy which at time of writing was - They are deleted after 30 days or 100 revisions (whatever comes first). - They do not count towards a user storage quota. Deleting files By default rclone will send all files to the trash when deleting files. If deleting them permanently is required then use the --drive-use-trash=false flag, or set the equivalent environment variable. Emptying trash If you wish to empty your trash you can use the rclone cleanup remote: command which will permanently delete all your trashed files. This command does not take any path arguments. Quota information To view your current quota you can use the rclone about remote: command which will display your usage limit (quota), the usage in Google Drive, the size of all files in the Trash and the space used by other Google services such as Gmail. This command does not take any path arguments. Specific options Here are the command line options specific to this cloud storage system. --drive-acknowledge-abuse If downloading a file returns the error This file has been identified as malware or spam and cannot be downloaded with the error code cannotDownloadAbusiveFile then supply this flag to rclone to indicate you acknowledge the risks of downloading the file and rclone will download it anyway. --drive-auth-owner-only Only consider files owned by the authenticated user. --drive-chunk-size=SIZE Upload chunk size. Must a power of 2 >= 256k. Default value is 8 MB. Making this larger will improve performance, but note that each chunk is buffered in memory one per transfer. Reducing this will reduce memory usage but decrease performance. --drive-formats Google documents can only be exported from Google drive. When rclone downloads a Google doc it chooses a format to download depending upon this setting. By default the formats are docx,xlsx,pptx,svg which are a sensible default for an editable document. When choosing a format, rclone runs down the list provided in order and chooses the first file format the doc can be exported as from the list. If the file can't be exported to a format on the formats list, then rclone will choose a format from the default list. If you prefer an archive copy then you might use --drive-formats pdf, or if you prefer openoffice/libreoffice formats you might use --drive-formats ods,odt,odp. Note that rclone adds the extension to the google doc, so if it is calles My Spreadsheet on google docs, it will be exported as My Spreadsheet.xlsx or My Spreadsheet.pdf etc. Here are the possible extensions with their corresponding mime types. Extension Mime Type Description --------------------------------------------------------------------------- ------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------- csv text/csv Standard CSV format for Spreadsheets doc application/msword Micosoft Office Document docx application/vnd.openxmlformats-officedocument.wordprocessingml.document Microsoft Office Document epub application/epub+zip E-book format html text/html An HTML Document jpg image/jpeg A JPEG Image File odp application/vnd.oasis.opendocument.presentation Openoffice Presentation ods application/vnd.oasis.opendocument.spreadsheet Openoffice Spreadsheet ods application/x-vnd.oasis.opendocument.spreadsheet Openoffice Spreadsheet odt application/vnd.oasis.opendocument.text Openoffice Document pdf application/pdf Adobe PDF Format png image/png PNG Image Format pptx application/vnd.openxmlformats-officedocument.presentationml.presentation Microsoft Office Powerpoint rtf application/rtf Rich Text Format svg image/svg+xml Scalable Vector Graphics Format tsv text/tab-separated-values Standard TSV format for spreadsheets txt text/plain Plain Text xls application/vnd.ms-excel Microsoft Office Spreadsheet xlsx application/vnd.openxmlformats-officedocument.spreadsheetml.sheet Microsoft Office Spreadsheet zip application/zip A ZIP file of HTML, Images CSS --drive-alternate-export If this option is set this instructs rclone to use an alternate set of export URLs for drive documents. Users have reported that the official export URLs can't export large documents, whereas these unofficial ones can. See rclone issue #2243 for background, this google drive issue and this helpful post. --drive-impersonate user When using a service account, this instructs rclone to impersonate the user passed in. --drive-keep-revision-forever Keeps new head revision of the file forever. --drive-list-chunk int Size of listing chunk 100-1000. 0 to disable. (default 1000) --drive-shared-with-me Instructs rclone to operate on your "Shared with me" folder (where Google Drive lets you access the files and folders others have shared with you). This works both with the "list" (lsd, lsl, etc) and the "copy" commands (copy, sync, etc), and with all other commands too. --drive-skip-gdocs Skip google documents in all listings. If given, gdocs practically become invisible to rclone. --drive-trashed-only Only show files that are in the trash. This will show trashed files in their original directory structure. --drive-upload-cutoff=SIZE File size cutoff for switching to chunked upload. Default is 8 MB. --drive-use-trash Controls whether files are sent to the trash or deleted permanently. Defaults to true, namely sending files to the trash. Use --drive-use-trash=false to delete files permanently instead. --drive-use-created-date Use the file creation date in place of the modification date. Defaults to false. Useful when downloading data and you want the creation date used in place of the last modified date. WARNING: This flag may have some unexpected consequences. When uploading to your drive all files will be overwritten unless they haven't been modified since their creation. And the inverse will occur while downloading. This side effect can be avoided by using the --checksum flag. This feature was implemented to retain photos capture date as recorded by google photos. You will first need to check the "Create a Google Photos folder" option in your google drive settings. You can then copy or move the photos locally and use the date the image was taken (created) set as the modification date. Limitations Drive has quite a lot of rate limiting. This causes rclone to be limited to transferring about 2 files per second only. Individual files may be transferred much faster at 100s of MBytes/s but lots of small files can take a long time. Server side copies are also subject to a separate rate limit. If you see User rate limit exceeded errors, wait at least 24 hours and retry. You can disable server side copies with --disable copy to download and upload the files if you prefer. Limitations of Google Docs Google docs will appear as size -1 in rclone ls and as size 0 in anything which uses the VFS layer, eg rclone mount, rclone serve. This is because rclone can't find out the size of the Google docs without downloading them. Google docs will transfer correctly with rclone sync, rclone copy etc as rclone knows to ignore the size when doing the transfer. However an unfortunate consequence of this is that you can't download Google docs using rclone mount - you will get a 0 sized file. If you try again the doc may gain its correct size and be downloadable. Duplicated files Sometimes, for no reason I've been able to track down, drive will duplicate a file that rclone uploads. Drive unlike all the other remotes can have duplicated files. Duplicated files cause problems with the syncing and you will see messages in the log about duplicates. Use rclone dedupe to fix duplicated files. Note that this isn't just a problem with rclone, even Google Photos on Android duplicates files on drive sometimes. Rclone appears to be re-copying files it shouldn't The most likely cause of this is the duplicated file issue above - run rclone dedupe and check your logs for duplicate object or directory messages. Making your own client_id When you use rclone with Google drive in its default configuration you are using rclone's client_id. This is shared between all the rclone users. There is a global rate limit on the number of queries per second that each client_id can do set by Google. rclone already has a high quota and I will continue to make sure it is high enough by contacting Google. However you might find you get better performance making your own client_id if you are a heavy user. Or you may not depending on exactly how Google have been raising rclone's rate limit. Here is how to create your own Google Drive client ID for rclone: 1. Log into the Google API Console with your Google account. It doesn't matter what Google account you use. (It need not be the same account as the Google Drive you want to access) 2. Select a project or create a new project. 3. Under "ENABLE APIS AND SERVICES" search for "Drive", and enable the then "Google Drive API". 4. Click "Credentials" in the left-side panel (not "Create credentials", which opens the wizard), then "Create credentials", then "OAuth client ID". It will prompt you to set the OAuth consent screen product name, if you haven't set one already. 5. Choose an application type of "other", and click "Create". (the default name is fine) 6. It will show you a client ID and client secret. Use these values in rclone config to add a new remote or edit an existing remote. (Thanks to @balazer on github for these instructions.) HTTP The HTTP remote is a read only remote for reading files of a webserver. The webserver should provide file listings which rclone will read and turn into a remote. This has been tested with common webservers such as Apache/Nginx/Caddy and will likely work with file listings from most web servers. (If it doesn't then please file an issue, or send a pull request!) Paths are specified as remote: or remote:path/to/dir. Here is an example of how to make a remote called remote. First run: rclone config This will guide you through an interactive setup process: No remotes found - make a new one n) New remote s) Set configuration password q) Quit config n/s/q> n name> remote Type of storage to configure. Choose a number from below, or type in your own value 1 / Amazon Drive \ "amazon cloud drive" 2 / Amazon S3 (also Dreamhost, Ceph, Minio) \ "s3" 3 / Backblaze B2 \ "b2" 4 / Dropbox \ "dropbox" 5 / Encrypt/Decrypt a remote \ "crypt" 6 / FTP Connection \ "ftp" 7 / Google Cloud Storage (this is not Google Drive) \ "google cloud storage" 8 / Google Drive \ "drive" 9 / Hubic \ "hubic" 10 / Local Disk \ "local" 11 / Microsoft OneDrive \ "onedrive" 12 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH) \ "swift" 13 / SSH/SFTP Connection \ "sftp" 14 / Yandex Disk \ "yandex" 15 / http Connection \ "http" Storage> http URL of http host to connect to Choose a number from below, or type in your own value 1 / Connect to example.com \ "https://example.com" url> https://beta.rclone.org Remote config -------------------- [remote] url = https://beta.rclone.org -------------------- y) Yes this is OK e) Edit this remote d) Delete this remote y/e/d> y Current remotes: Name Type ==== ==== remote http e) Edit existing remote n) New remote d) Delete remote r) Rename remote c) Copy remote s) Set configuration password q) Quit config e/n/d/r/c/s/q> q This remote is called remote and can now be used like this See all the top level directories rclone lsd remote: List the contents of a directory rclone ls remote:directory Sync the remote directory to /home/local/directory, deleting any excess files. rclone sync remote:directory /home/local/directory Read only This remote is read only - you can't upload files to an HTTP server. Modified time Most HTTP servers store time accurate to 1 second. Checksum No checksums are stored. Usage without a config file Since the http remote only has one config parameter it is easy to use without a config file: rclone lsd --http-url https://beta.rclone.org :http: Hubic Paths are specified as remote:path Paths are specified as remote:container (or remote: for the lsd command.) You may put subdirectories in too, eg remote:container/path/to/dir. The initial setup for Hubic involves getting a token from Hubic which you need to do in your browser. rclone config walks you through it. Here is an example of how to make a remote called remote. First run: rclone config This will guide you through an interactive setup process: n) New remote s) Set configuration password n/s> n name> remote Type of storage to configure. Choose a number from below, or type in your own value 1 / Amazon Drive \ "amazon cloud drive" 2 / Amazon S3 (also Dreamhost, Ceph, Minio) \ "s3" 3 / Backblaze B2 \ "b2" 4 / Dropbox \ "dropbox" 5 / Encrypt/Decrypt a remote \ "crypt" 6 / Google Cloud Storage (this is not Google Drive) \ "google cloud storage" 7 / Google Drive \ "drive" 8 / Hubic \ "hubic" 9 / Local Disk \ "local" 10 / Microsoft OneDrive \ "onedrive" 11 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH) \ "swift" 12 / SSH/SFTP Connection \ "sftp" 13 / Yandex Disk \ "yandex" Storage> 8 Hubic Client Id - leave blank normally. client_id> Hubic Client Secret - leave blank normally. client_secret> Remote config Use auto config? * Say Y if not sure * Say N if you are working on a remote or headless machine y) Yes n) No y/n> y If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth Log in and authorize rclone for access Waiting for code... Got code -------------------- [remote] client_id = client_secret = token = {"access_token":"XXXXXX"} -------------------- y) Yes this is OK e) Edit this remote d) Delete this remote y/e/d> y See the remote setup docs for how to set it up on a machine with no Internet browser available. Note that rclone runs a webserver on your local machine to collect the token as returned from Hubic. This only runs from the moment it opens your browser to the moment you get back the verification code. This is on http://127.0.0.1:53682/ and this it may require you to unblock it temporarily if you are running a host firewall. Once configured you can then use rclone like this, List containers in the top level of your Hubic rclone lsd remote: List all the files in your Hubic rclone ls remote: To copy a local directory to an Hubic directory called backup rclone copy /home/source remote:backup If you want the directory to be visible in the official _Hubic browser_, you need to copy your files to the default directory rclone copy /home/source remote:default/backup --fast-list This remote supports --fast-list which allows you to use fewer transactions in exchange for more memory. See the rclone docs for more details. Modified time The modified time is stored as metadata on the object as X-Object-Meta-Mtime as floating point since the epoch accurate to 1 ns. This is a defacto standard (used in the official python-swiftclient amongst others) for storing the modification time for an object. Note that Hubic wraps the Swift backend, so most of the properties of are the same. Limitations This uses the normal OpenStack Swift mechanism to refresh the Swift API credentials and ignores the expires field returned by the Hubic API. The Swift API doesn't return a correct MD5SUM for segmented files (Dynamic or Static Large Objects) so rclone won't check or use the MD5SUM for these. Jottacloud Paths are specified as remote:path Paths may be as deep as required, eg remote:directory/subdirectory. To configure Jottacloud you will need to enter your username and password and select a mountpoint. Here is an example of how to make a remote called remote. First run: rclone config This will guide you through an interactive setup process: No remotes found - make a new one n) New remote s) Set configuration password q) Quit config n/s/q> n name> remote Type of storage to configure. Enter a string value. Press Enter for the default (""). Choose a number from below, or type in your own value [snip] 13 / JottaCloud \ "jottacloud" [snip] Storage> jottacloud User Name Enter a string value. Press Enter for the default (""). user> user Password. y) Yes type in my own password g) Generate random password n) No leave this optional password blank y/g/n> y Enter the password: password: Confirm the password: password: The mountpoint to use. Enter a string value. Press Enter for the default (""). Choose a number from below, or type in your own value 1 / Will be synced by the official client. \ "Sync" 2 / Archive \ "Archive" mountpoint> Archive Remote config -------------------- [remote] type = jottacloud user = user pass = *** ENCRYPTED *** mountpoint = Archive -------------------- y) Yes this is OK e) Edit this remote d) Delete this remote y/e/d> y Once configured you can then use rclone like this, List directories in top level of your Jottacloud rclone lsd remote: List all the files in your Jottacloud rclone ls remote: To copy a local directory to an Jottacloud directory called backup rclone copy /home/source remote:backup Modified time and hashes Jottacloud allows modification times to be set on objects accurate to 1 second. These will be used to detect whether objects need syncing or not. Jottacloud supports MD5 type hashes, so you can use the --checksum flag. Note that Jottacloud requires the MD5 hash before upload so if the source does not have an MD5 checksum then the file will be cached temporarily on disk (wherever the TMPDIR environment variable points to) before it is uploaded. Small files will be cached in memory - see the --jottacloud-md5-memory-limit flag. Deleting files Any files you delete with rclone will end up in the trash. Due to a lack of API documentation emptying the trash is currently only possible via the Jottacloud website. Versions Jottacloud supports file versioning. When rclone uploads a new version of a file it creates a new version of it. Currently rclone only supports retrieving the current version but older versions can be accessed via the Jottacloud Website. Limitations Note that Jottacloud is case insensitive so you can't have a file called "Hello.doc" and one called "hello.doc". There are quite a few characters that can't be in Jottacloud file names. Rclone will map these names to and from an identical looking unicode equivalent. For example if a file has a ? in it will be mapped to ？ instead. Jottacloud only supports filenames up to 255 characters in length. Specific options Here are the command line options specific to this cloud storage system. --jottacloud-md5-memory-limit SizeSuffix Files bigger than this will be cached on disk to calculate the MD5 if required. (default 10M) Troubleshooting Jottacloud exhibits some inconsistent behaviours regarding deleted files and folders which may cause Copy, Move and DirMove operations to previously deleted paths to fail. Emptying the trash should help in such cases. Mega Mega is a cloud storage and file hosting service known for its security feature where all files are encrypted locally before they are uploaded. This prevents anyone (including employees of Mega) from accessing the files without knowledge of the key used for encryption. This is an rclone backend for Mega which supports the file transfer features of Mega using the same client side encryption. Paths are specified as remote:path Paths may be as deep as required, eg remote:directory/subdirectory. Here is an example of how to make a remote called remote. First run: rclone config This will guide you through an interactive setup process: No remotes found - make a new one n) New remote s) Set configuration password q) Quit config n/s/q> n name> remote Type of storage to configure. Choose a number from below, or type in your own value 1 / Alias for a existing remote \ "alias" [snip] 14 / Mega \ "mega" [snip] 23 / http Connection \ "http" Storage> mega User name user> you@example.com Password. y) Yes type in my own password g) Generate random password n) No leave this optional password blank y/g/n> y Enter the password: password: Confirm the password: password: Remote config -------------------- [remote] type = mega user = you@example.com pass = *** ENCRYPTED *** -------------------- y) Yes this is OK e) Edit this remote d) Delete this remote y/e/d> y Once configured you can then use rclone like this, List directories in top level of your Mega rclone lsd remote: List all the files in your Mega rclone ls remote: To copy a local directory to an Mega directory called backup rclone copy /home/source remote:backup Modified time and hashes Mega does not support modification times or hashes yet. Duplicated files Mega can have two files with exactly the same name and path (unlike a normal file system). Duplicated files cause problems with the syncing and you will see messages in the log about duplicates. Use rclone dedupe to fix duplicated files. Specific options Here are the command line options specific to this cloud storage system. --mega-debug If this flag is set (along with -vv) it will print further debugging information from the mega backend. --mega-hard-delete Normally the mega backend will put all deletions into the trash rather than permanently deleting them. If you specify this flag (or set it in the advanced config) then rclone will permanently delete objects instead. Limitations This backend uses the go-mega go library which is an opensource go library implementing the Mega API. There doesn't appear to be any documentation for the mega protocol beyond the mega C++ SDK source code so there are likely quite a few errors still remaining in this library. Mega allows duplicate files which may confuse rclone. Microsoft Azure Blob Storage Paths are specified as remote:container (or remote: for the lsd command.) You may put subdirectories in too, eg remote:container/path/to/dir. Here is an example of making a Microsoft Azure Blob Storage configuration. For a remote called remote. First run: rclone config This will guide you through an interactive setup process: No remotes found - make a new one n) New remote s) Set configuration password q) Quit config n/s/q> n name> remote Type of storage to configure. Choose a number from below, or type in your own value 1 / Amazon Drive \ "amazon cloud drive" 2 / Amazon S3 (also Dreamhost, Ceph, Minio) \ "s3" 3 / Backblaze B2 \ "b2" 4 / Box \ "box" 5 / Dropbox \ "dropbox" 6 / Encrypt/Decrypt a remote \ "crypt" 7 / FTP Connection \ "ftp" 8 / Google Cloud Storage (this is not Google Drive) \ "google cloud storage" 9 / Google Drive \ "drive" 10 / Hubic \ "hubic" 11 / Local Disk \ "local" 12 / Microsoft Azure Blob Storage \ "azureblob" 13 / Microsoft OneDrive \ "onedrive" 14 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH) \ "swift" 15 / SSH/SFTP Connection \ "sftp" 16 / Yandex Disk \ "yandex" 17 / http Connection \ "http" Storage> azureblob Storage Account Name account> account_name Storage Account Key key> base64encodedkey== Endpoint for the service - leave blank normally. endpoint> Remote config -------------------- [remote] account = account_name key = base64encodedkey== endpoint = -------------------- y) Yes this is OK e) Edit this remote d) Delete this remote y/e/d> y See all containers rclone lsd remote: Make a new container rclone mkdir remote:container List the contents of a container rclone ls remote:container Sync /home/local/directory to the remote container, deleting any excess files in the container. rclone sync /home/local/directory remote:container --fast-list This remote supports --fast-list which allows you to use fewer transactions in exchange for more memory. See the rclone docs for more details. Modified time The modified time is stored as metadata on the object with the mtime key. It is stored using RFC3339 Format time with nanosecond precision. The metadata is supplied during directory listings so there is no overhead to using it. Hashes MD5 hashes are stored with blobs. However blobs that were uploaded in chunks only have an MD5 if the source remote was capable of MD5 hashes, eg the local disk. Authenticating with Azure Blob Storage Rclone has 3 ways of authenticating with Azure Blob Storage: Account and Key This is the most straight forward and least flexible way. Just fill in the account and key lines and leave the rest blank. SAS URL This can be an account level SAS URL or container level SAS URL To use it leave account, key blank and fill in sas_url. Account level SAS URL or container level SAS URL can be obtained from Azure portal or Azure Storage Explorer. To get a container level SAS URL right click on a container in the Azure Blob explorer in the Azure portal. If You use container level SAS URL, rclone operations are permitted only on particular container, eg rclone ls azureblob:container or rclone ls azureblob: Since container name already exists in SAS URL, you can leave it empty as well. However these will not work rclone lsd azureblob: rclone ls azureblob:othercontainer This would be useful for temporarily allowing third parties access to a single container or putting credentials into an untrusted environment. Multipart uploads Rclone supports multipart uploads with Azure Blob storage. Files bigger than 256MB will be uploaded using chunked upload by default. The files will be uploaded in parallel in 4MB chunks (by default). Note that these chunks are buffered in memory and there may be up to --transfers of them being uploaded at once. Files can't be split into more than 50,000 chunks so by default, so the largest file that can be uploaded with 4MB chunk size is 195GB. Above this rclone will double the chunk size until it creates less than 50,000 chunks. By default this will mean a maximum file size of 3.2TB can be uploaded. This can be raised to 5TB using --azureblob-chunk-size 100M. Note that rclone doesn't commit the block list until the end of the upload which means that there is a limit of 9.5TB of multipart uploads in progress as Azure won't allow more than that amount of uncommitted blocks. Specific options Here are the command line options specific to this cloud storage system. --azureblob-upload-cutoff=SIZE Cutoff for switching to chunked upload - must be <= 256MB. The default is 256MB. --azureblob-chunk-size=SIZE Upload chunk size. Default 4MB. Note that this is stored in memory and there may be up to --transfers chunks stored at once in memory. This can be at most 100MB. --azureblob-access-tier=Hot/Cool/Archive Azure storage supports blob tiering, you can configure tier in advanced settings or supply flag while performing data transfer operations. If there is no access tier specified, rclone doesn't apply any tier. rclone performs Set Tier operation on blobs while uploading, if objects are not modified, specifying access tier to new one will have no effect. If blobs are in archive tier at remote, trying to perform data transfer operations from remote will not be allowed. User should first restore by tiering blob to Hot or Cool. Limitations MD5 sums are only uploaded with chunked files if the source has an MD5 sum. This will always be the case for a local to azure copy. Microsoft OneDrive Paths are specified as remote:path Paths may be as deep as required, eg remote:directory/subdirectory. The initial setup for OneDrive involves getting a token from Microsoft which you need to do in your browser. rclone config walks you through it. Here is an example of how to make a remote called remote. First run: rclone config This will guide you through an interactive setup process: No remotes found - make a new one n) New remote s) Set configuration password n/s> n name> remote Type of storage to configure. Choose a number from below, or type in your own value 1 / Amazon Drive \ "amazon cloud drive" 2 / Amazon S3 (also Dreamhost, Ceph, Minio) \ "s3" 3 / Backblaze B2 \ "b2" 4 / Dropbox \ "dropbox" 5 / Encrypt/Decrypt a remote \ "crypt" 6 / Google Cloud Storage (this is not Google Drive) \ "google cloud storage" 7 / Google Drive \ "drive" 8 / Hubic \ "hubic" 9 / Local Disk \ "local" 10 / Microsoft OneDrive \ "onedrive" 11 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH) \ "swift" 12 / SSH/SFTP Connection \ "sftp" 13 / Yandex Disk \ "yandex" Storage> 10 Microsoft App Client Id - leave blank normally. client_id> Microsoft App Client Secret - leave blank normally. client_secret> Remote config Choose OneDrive account type? * Say b for a OneDrive business account * Say p for a personal OneDrive account b) Business p) Personal b/p> p Use auto config? * Say Y if not sure * Say N if you are working on a remote or headless machine y) Yes n) No y/n> y If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth Log in and authorize rclone for access Waiting for code... Got code -------------------- [remote] client_id = client_secret = token = {"access_token":"XXXXXX"} -------------------- y) Yes this is OK e) Edit this remote d) Delete this remote y/e/d> y See the remote setup docs for how to set it up on a machine with no Internet browser available. Note that rclone runs a webserver on your local machine to collect the token as returned from Microsoft. This only runs from the moment it opens your browser to the moment you get back the verification code. This is on http://127.0.0.1:53682/ and this it may require you to unblock it temporarily if you are running a host firewall. Once configured you can then use rclone like this, List directories in top level of your OneDrive rclone lsd remote: List all the files in your OneDrive rclone ls remote: To copy a local directory to an OneDrive directory called backup rclone copy /home/source remote:backup OneDrive for Business There is additional support for OneDrive for Business. Select "b" when ask Choose OneDrive account type? * Say b for a OneDrive business account * Say p for a personal OneDrive account b) Business p) Personal b/p> After that rclone requires an authentication of your account. The application will first authenticate your account, then query the OneDrive resource URL and do a second (silent) authentication for this resource URL. Modified time and hashes OneDrive allows modification times to be set on objects accurate to 1 second. These will be used to detect whether objects need syncing or not. OneDrive personal supports SHA1 type hashes. OneDrive for business and Sharepoint Server support QuickXorHash. For all types of OneDrive you can use the --checksum flag. Deleting files Any files you delete with rclone will end up in the trash. Microsoft doesn't provide an API to permanently delete files, nor to empty the trash, so you will have to do that with one of Microsoft's apps or via the OneDrive website. Specific options Here are the command line options specific to this cloud storage system. --onedrive-chunk-size=SIZE Above this size files will be chunked - must be multiple of 320k. The default is 10MB. Note that the chunks will be buffered into memory. Limitations Note that OneDrive is case insensitive so you can't have a file called "Hello.doc" and one called "hello.doc". There are quite a few characters that can't be in OneDrive file names. These can't occur on Windows platforms, but on non-Windows platforms they are common. Rclone will map these names to and from an identical looking unicode equivalent. For example if a file has a ? in it will be mapped to ？ instead. The largest allowed file size is 10GiB (10,737,418,240 bytes). Versioning issue Every change in OneDrive causes the service to create a new version. This counts against a users quota. For example changing the modification time of a file creates a second version, so the file is using twice the space. The copy is the only rclone command affected by this as we copy the file and then afterwards set the modification time to match the source file. User Weropol has found a method to disable versioning on OneDrive 1. Open the settings menu by clicking on the gear symbol at the top of the OneDrive Business page. 2. Click Site settings. 3. Once on the Site settings page, navigate to Site Administration > Site libraries and lists. 4. Click Customize "Documents". 5. Click General Settings > Versioning Settings. 6. Under Document Version History select the option No versioning. Note: This will disable the creation of new file versions, but will not remove any previous versions. Your documents are safe. 7. Apply the changes by clicking OK. 8. Use rclone to upload or modify files. (I also use the --no-update-modtime flag) 9. Restore the versioning settings after using rclone. (Optional) Troubleshooting Error: access_denied Code: AADSTS65005 Description: Using application 'rclone' is currently not supported for your organization [YOUR_ORGANIZATION] because it is in an unmanaged state. An administrator needs to claim ownership of the company by DNS validation of [YOUR_ORGANIZATION] before the application rclone can be provisioned. This means that rclone can't use the OneDrive for Business API with your account. You can't do much about it, maybe write an email to your admins. However, there are other ways to interact with your OneDrive account. Have a look at the webdav backend: https://rclone.org/webdav/#sharepoint OpenDrive Paths are specified as remote:path Paths may be as deep as required, eg remote:directory/subdirectory. Here is an example of how to make a remote called remote. First run: rclone config This will guide you through an interactive setup process: n) New remote d) Delete remote q) Quit config e/n/d/q> n name> remote Type of storage to configure. Choose a number from below, or type in your own value 1 / Amazon Drive \ "amazon cloud drive" 2 / Amazon S3 (also Dreamhost, Ceph, Minio) \ "s3" 3 / Backblaze B2 \ "b2" 4 / Dropbox \ "dropbox" 5 / Encrypt/Decrypt a remote \ "crypt" 6 / Google Cloud Storage (this is not Google Drive) \ "google cloud storage" 7 / Google Drive \ "drive" 8 / Hubic \ "hubic" 9 / Local Disk \ "local" 10 / OpenDrive \ "opendrive" 11 / Microsoft OneDrive \ "onedrive" 12 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH) \ "swift" 13 / SSH/SFTP Connection \ "sftp" 14 / Yandex Disk \ "yandex" Storage> 10 Username username> Password y) Yes type in my own password g) Generate random password y/g> y Enter the password: password: Confirm the password: password: -------------------- [remote] username = password = *** ENCRYPTED *** -------------------- y) Yes this is OK e) Edit this remote d) Delete this remote y/e/d> y List directories in top level of your OpenDrive rclone lsd remote: List all the files in your OpenDrive rclone ls remote: To copy a local directory to an OpenDrive directory called backup rclone copy /home/source remote:backup Modified time and MD5SUMs OpenDrive allows modification times to be set on objects accurate to 1 second. These will be used to detect whether objects need syncing or not. Deleting files Any files you delete with rclone will end up in the trash. Amazon don't provide an API to permanently delete files, nor to empty the trash, so you will have to do that with one of Amazon's apps or via the OpenDrive website. As of November 17, 2016, files are automatically deleted by Amazon from the trash after 30 days. Limitations Note that OpenDrive is case insensitive so you can't have a file called "Hello.doc" and one called "hello.doc". There are quite a few characters that can't be in OpenDrive file names. These can't occur on Windows platforms, but on non-Windows platforms they are common. Rclone will map these names to and from an identical looking unicode equivalent. For example if a file has a ? in it will be mapped to ？ instead. QingStor Paths are specified as remote:bucket (or remote: for the lsd command.) You may put subdirectories in too, eg remote:bucket/path/to/dir. Here is an example of making an QingStor configuration. First run rclone config This will guide you through an interactive setup process. No remotes found - make a new one n) New remote r) Rename remote c) Copy remote s) Set configuration password q) Quit config n/r/c/s/q> n name> remote Type of storage to configure. Choose a number from below, or type in your own value 1 / Amazon Drive \ "amazon cloud drive" 2 / Amazon S3 (also Dreamhost, Ceph, Minio) \ "s3" 3 / Backblaze B2 \ "b2" 4 / Dropbox \ "dropbox" 5 / Encrypt/Decrypt a remote \ "crypt" 6 / FTP Connection \ "ftp" 7 / Google Cloud Storage (this is not Google Drive) \ "google cloud storage" 8 / Google Drive \ "drive" 9 / Hubic \ "hubic" 10 / Local Disk \ "local" 11 / Microsoft OneDrive \ "onedrive" 12 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH) \ "swift" 13 / QingStor Object Storage \ "qingstor" 14 / SSH/SFTP Connection \ "sftp" 15 / Yandex Disk \ "yandex" Storage> 13 Get QingStor credentials from runtime. Only applies if access_key_id and secret_access_key is blank. Choose a number from below, or type in your own value 1 / Enter QingStor credentials in the next step \ "false" 2 / Get QingStor credentials from the environment (env vars or IAM) \ "true" env_auth> 1 QingStor Access Key ID - leave blank for anonymous access or runtime credentials. access_key_id> access_key QingStor Secret Access Key (password) - leave blank for anonymous access or runtime credentials. secret_access_key> secret_key Enter a endpoint URL to connection QingStor API. Leave blank will use the default value "https://qingstor.com:443" endpoint> Zone connect to. Default is "pek3a". Choose a number from below, or type in your own value / The Beijing (China) Three Zone 1 | Needs location constraint pek3a. \ "pek3a" / The Shanghai (China) First Zone 2 | Needs location constraint sh1a. \ "sh1a" zone> 1 Number of connnection retry. Leave blank will use the default value "3". connection_retries> Remote config -------------------- [remote] env_auth = false access_key_id = access_key secret_access_key = secret_key endpoint = zone = pek3a connection_retries = -------------------- y) Yes this is OK e) Edit this remote d) Delete this remote y/e/d> y This remote is called remote and can now be used like this See all buckets rclone lsd remote: Make a new bucket rclone mkdir remote:bucket List the contents of a bucket rclone ls remote:bucket Sync /home/local/directory to the remote bucket, deleting any excess files in the bucket. rclone sync /home/local/directory remote:bucket --fast-list This remote supports --fast-list which allows you to use fewer transactions in exchange for more memory. See the rclone docs for more details. Multipart uploads rclone supports multipart uploads with QingStor which means that it can upload files bigger than 5GB. Note that files uploaded with multipart upload don't have an MD5SUM. Buckets and Zone With QingStor you can list buckets (rclone lsd) using any zone, but you can only access the content of a bucket from the zone it was created in. If you attempt to access a bucket from the wrong zone, you will get an error, incorrect zone, the bucket is not in 'XXX' zone. Authentication There are two ways to supply rclone with a set of QingStor credentials. In order of precedence: - Directly in the rclone configuration file (as configured by rclone config) - set access_key_id and secret_access_key - Runtime configuration: - set env_auth to true in the config file - Exporting the following environment variables before running rclone - Access Key ID: QS_ACCESS_KEY_ID or QS_ACCESS_KEY - Secret Access Key: QS_SECRET_ACCESS_KEY or QS_SECRET_KEY Swift Swift refers to Openstack Object Storage. Commercial implementations of that being: - Rackspace Cloud Files - Memset Memstore - OVH Object Storage - Oracle Cloud Storage - IBM Bluemix Cloud ObjectStorage Swift Paths are specified as remote:container (or remote: for the lsd command.) You may put subdirectories in too, eg remote:container/path/to/dir. Here is an example of making a swift configuration. First run rclone config This will guide you through an interactive setup process. No remotes found - make a new one n) New remote s) Set configuration password q) Quit config n/s/q> n name> remote Type of storage to configure. Choose a number from below, or type in your own value 1 / Amazon Drive \ "amazon cloud drive" 2 / Amazon S3 (also Dreamhost, Ceph, Minio) \ "s3" 3 / Backblaze B2 \ "b2" 4 / Box \ "box" 5 / Cache a remote \ "cache" 6 / Dropbox \ "dropbox" 7 / Encrypt/Decrypt a remote \ "crypt" 8 / FTP Connection \ "ftp" 9 / Google Cloud Storage (this is not Google Drive) \ "google cloud storage" 10 / Google Drive \ "drive" 11 / Hubic \ "hubic" 12 / Local Disk \ "local" 13 / Microsoft Azure Blob Storage \ "azureblob" 14 / Microsoft OneDrive \ "onedrive" 15 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH) \ "swift" 16 / Pcloud \ "pcloud" 17 / QingCloud Object Storage \ "qingstor" 18 / SSH/SFTP Connection \ "sftp" 19 / Webdav \ "webdav" 20 / Yandex Disk \ "yandex" 21 / http Connection \ "http" Storage> swift Get swift credentials from environment variables in standard OpenStack form. Choose a number from below, or type in your own value 1 / Enter swift credentials in the next step \ "false" 2 / Get swift credentials from environment vars. Leave other fields blank if using this. \ "true" env_auth> true User name to log in (OS_USERNAME). user> API key or password (OS_PASSWORD). key> Authentication URL for server (OS_AUTH_URL). Choose a number from below, or type in your own value 1 / Rackspace US \ "https://auth.api.rackspacecloud.com/v1.0" 2 / Rackspace UK \ "https://lon.auth.api.rackspacecloud.com/v1.0" 3 / Rackspace v2 \ "https://identity.api.rackspacecloud.com/v2.0" 4 / Memset Memstore UK \ "https://auth.storage.memset.com/v1.0" 5 / Memset Memstore UK v2 \ "https://auth.storage.memset.com/v2.0" 6 / OVH \ "https://auth.cloud.ovh.net/v2.0" auth> User ID to log in - optional - most swift systems use user and leave this blank (v3 auth) (OS_USER_ID). user_id> User domain - optional (v3 auth) (OS_USER_DOMAIN_NAME) domain> Tenant name - optional for v1 auth, this or tenant_id required otherwise (OS_TENANT_NAME or OS_PROJECT_NAME) tenant> Tenant ID - optional for v1 auth, this or tenant required otherwise (OS_TENANT_ID) tenant_id> Tenant domain - optional (v3 auth) (OS_PROJECT_DOMAIN_NAME) tenant_domain> Region name - optional (OS_REGION_NAME) region> Storage URL - optional (OS_STORAGE_URL) storage_url> Auth Token from alternate authentication - optional (OS_AUTH_TOKEN) auth_token> AuthVersion - optional - set to (1,2,3) if your auth URL has no version (ST_AUTH_VERSION) auth_version> Endpoint type to choose from the service catalogue (OS_ENDPOINT_TYPE) Choose a number from below, or type in your own value 1 / Public (default, choose this if not sure) \ "public" 2 / Internal (use internal service net) \ "internal" 3 / Admin \ "admin" endpoint_type> Remote config -------------------- [test] env_auth = true user = key = auth = user_id = domain = tenant = tenant_id = tenant_domain = region = storage_url = auth_token = auth_version = endpoint_type = -------------------- y) Yes this is OK e) Edit this remote d) Delete this remote y/e/d> y This remote is called remote and can now be used like this See all containers rclone lsd remote: Make a new container rclone mkdir remote:container List the contents of a container rclone ls remote:container Sync /home/local/directory to the remote container, deleting any excess files in the container. rclone sync /home/local/directory remote:container Configuration from an Openstack credentials file An Opentstack credentials file typically looks something something like this (without the comments) export OS_AUTH_URL=https://a.provider.net/v2.0 export OS_TENANT_ID=ffffffffffffffffffffffffffffffff export OS_TENANT_NAME="1234567890123456" export OS_USERNAME="123abc567xy" echo "Please enter your OpenStack Password: " read -sr OS_PASSWORD_INPUT export OS_PASSWORD=$OS_PASSWORD_INPUT export OS_REGION_NAME="SBG1" if [ -z "$OS_REGION_NAME" ]; then unset OS_REGION_NAME; fi The config file needs to look something like this where $OS_USERNAME represents the value of the OS_USERNAME variable - 123abc567xy in the example above. [remote] type = swift user = $OS_USERNAME key = $OS_PASSWORD auth = $OS_AUTH_URL tenant = $OS_TENANT_NAME Note that you may (or may not) need to set region too - try without first. Configuration from the environment If you prefer you can configure rclone to use swift using a standard set of OpenStack environment variables. When you run through the config, make sure you choose true for env_auth and leave everything else blank. rclone will then set any empty config parameters from the environment using standard OpenStack environment variables. There is a list of the variables in the docs for the swift library. Using an alternate authentication method If your OpenStack installation uses a non-standard authentication method that might not be yet supported by rclone or the underlying swift library, you can authenticate externally (e.g. calling manually the openstack commands to get a token). Then, you just need to pass the two configuration variables auth_token and storage_url. If they are both provided, the other variables are ignored. rclone will not try to authenticate but instead assume it is already authenticated and use these two variables to access the OpenStack installation. Using rclone without a config file You can use rclone with swift without a config file, if desired, like this: source openstack-credentials-file export RCLONE_CONFIG_MYREMOTE_TYPE=swift export RCLONE_CONFIG_MYREMOTE_ENV_AUTH=true rclone lsd myremote: --fast-list This remote supports --fast-list which allows you to use fewer transactions in exchange for more memory. See the rclone docs for more details. --update and --use-server-modtime As noted below, the modified time is stored on metadata on the object. It is used by default for all operations that require checking the time a file was last updated. It allows rclone to treat the remote more like a true filesystem, but it is inefficient because it requires an extra API call to retrieve the metadata. For many operations, the time the object was last uploaded to the remote is sufficient to determine if it is "dirty". By using --update along with --use-server-modtime, you can avoid the extra API call and simply upload files whose local modtime is newer than the time it was last uploaded. Specific options Here are the command line options specific to this cloud storage system. --swift-storage-policy=STRING Apply the specified storage policy when creating a new container. The policy cannot be changed afterwards. The allowed configuration values and their meaning depend on your Swift storage provider. --swift-chunk-size=SIZE Above this size files will be chunked into a _segments container. The default for this is 5GB which is its maximum value. Modified time The modified time is stored as metadata on the object as X-Object-Meta-Mtime as floating point since the epoch accurate to 1 ns. This is a defacto standard (used in the official python-swiftclient amongst others) for storing the modification time for an object. Limitations The Swift API doesn't return a correct MD5SUM for segmented files (Dynamic or Static Large Objects) so rclone won't check or use the MD5SUM for these. Troubleshooting Rclone gives Failed to create file system for "remote:": Bad Request Due to an oddity of the underlying swift library, it gives a "Bad Request" error rather than a more sensible error when the authentication fails for Swift. So this most likely means your username / password is wrong. You can investigate further with the --dump-bodies flag. This may also be caused by specifying the region when you shouldn't have (eg OVH). Rclone gives Failed to create file system: Response didn't have storage storage url and auth token This is most likely caused by forgetting to specify your tenant when setting up a swift remote. pCloud Paths are specified as remote:path Paths may be as deep as required, eg remote:directory/subdirectory. The initial setup for pCloud involves getting a token from pCloud which you need to do in your browser. rclone config walks you through it. Here is an example of how to make a remote called remote. First run: rclone config This will guide you through an interactive setup process: No remotes found - make a new one n) New remote s) Set configuration password q) Quit config n/s/q> n name> remote Type of storage to configure. Choose a number from below, or type in your own value 1 / Amazon Drive \ "amazon cloud drive" 2 / Amazon S3 (also Dreamhost, Ceph, Minio) \ "s3" 3 / Backblaze B2 \ "b2" 4 / Box \ "box" 5 / Dropbox \ "dropbox" 6 / Encrypt/Decrypt a remote \ "crypt" 7 / FTP Connection \ "ftp" 8 / Google Cloud Storage (this is not Google Drive) \ "google cloud storage" 9 / Google Drive \ "drive" 10 / Hubic \ "hubic" 11 / Local Disk \ "local" 12 / Microsoft Azure Blob Storage \ "azureblob" 13 / Microsoft OneDrive \ "onedrive" 14 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH) \ "swift" 15 / Pcloud \ "pcloud" 16 / QingCloud Object Storage \ "qingstor" 17 / SSH/SFTP Connection \ "sftp" 18 / Yandex Disk \ "yandex" 19 / http Connection \ "http" Storage> pcloud Pcloud App Client Id - leave blank normally. client_id> Pcloud App Client Secret - leave blank normally. client_secret> Remote config Use auto config? * Say Y if not sure * Say N if you are working on a remote or headless machine y) Yes n) No y/n> y If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth Log in and authorize rclone for access Waiting for code... Got code -------------------- [remote] client_id = client_secret = token = {"access_token":"XXX","token_type":"bearer","expiry":"0001-01-01T00:00:00Z"} -------------------- y) Yes this is OK e) Edit this remote d) Delete this remote y/e/d> y See the remote setup docs for how to set it up on a machine with no Internet browser available. Note that rclone runs a webserver on your local machine to collect the token as returned from pCloud. This only runs from the moment it opens your browser to the moment you get back the verification code. This is on http://127.0.0.1:53682/ and this it may require you to unblock it temporarily if you are running a host firewall. Once configured you can then use rclone like this, List directories in top level of your pCloud rclone lsd remote: List all the files in your pCloud rclone ls remote: To copy a local directory to an pCloud directory called backup rclone copy /home/source remote:backup Modified time and hashes pCloud allows modification times to be set on objects accurate to 1 second. These will be used to detect whether objects need syncing or not. In order to set a Modification time pCloud requires the object be re-uploaded. pCloud supports MD5 and SHA1 type hashes, so you can use the --checksum flag. Deleting files Deleted files will be moved to the trash. Your subscription level will determine how long items stay in the trash. rclone cleanup can be used to empty the trash. SFTP SFTP is the Secure (or SSH) File Transfer Protocol. SFTP runs over SSH v2 and is installed as standard with most modern SSH installations. Paths are specified as remote:path. If the path does not begin with a / it is relative to the home directory of the user. An empty path remote: refers to the user's home directory. Note that some SFTP servers will need the leading / - Synology is a good example of this. Here is an example of making an SFTP configuration. First run rclone config This will guide you through an interactive setup process. No remotes found - make a new one n) New remote s) Set configuration password q) Quit config n/s/q> n name> remote Type of storage to configure. Choose a number from below, or type in your own value 1 / Amazon Drive \ "amazon cloud drive" 2 / Amazon S3 (also Dreamhost, Ceph, Minio) \ "s3" 3 / Backblaze B2 \ "b2" 4 / Dropbox \ "dropbox" 5 / Encrypt/Decrypt a remote \ "crypt" 6 / FTP Connection \ "ftp" 7 / Google Cloud Storage (this is not Google Drive) \ "google cloud storage" 8 / Google Drive \ "drive" 9 / Hubic \ "hubic" 10 / Local Disk \ "local" 11 / Microsoft OneDrive \ "onedrive" 12 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH) \ "swift" 13 / SSH/SFTP Connection \ "sftp" 14 / Yandex Disk \ "yandex" 15 / http Connection \ "http" Storage> sftp SSH host to connect to Choose a number from below, or type in your own value 1 / Connect to example.com \ "example.com" host> example.com SSH username, leave blank for current username, ncw user> sftpuser SSH port, leave blank to use default (22) port> SSH password, leave blank to use ssh-agent. y) Yes type in my own password g) Generate random password n) No leave this optional password blank y/g/n> n Path to unencrypted PEM-encoded private key file, leave blank to use ssh-agent. key_file> Remote config -------------------- [remote] host = example.com user = sftpuser port = pass = key_file = -------------------- y) Yes this is OK e) Edit this remote d) Delete this remote y/e/d> y This remote is called remote and can now be used like this: See all directories in the home directory rclone lsd remote: Make a new directory rclone mkdir remote:path/to/directory List the contents of a directory rclone ls remote:path/to/directory Sync /home/local/directory to the remote directory, deleting any excess files in the directory. rclone sync /home/local/directory remote:directory SSH Authentication The SFTP remote supports three authentication methods: - Password - Key file - ssh-agent Key files should be unencrypted PEM-encoded private key files. For instance /home/$USER/.ssh/id_rsa. If you don't specify pass or key_file then rclone will attempt to contact an ssh-agent. If you set the --sftp-ask-password option, rclone will prompt for a password when needed and no password has been configured. ssh-agent on macOS Note that there seem to be various problems with using an ssh-agent on macOS due to recent changes in the OS. The most effective work-around seems to be to start an ssh-agent in each session, eg eval `ssh-agent -s` && ssh-add -A And then at the end of the session eval `ssh-agent -k` These commands can be used in scripts of course. Specific options Here are the command line options specific to this remote. --sftp-ask-password Ask for the SFTP password if needed when no password has been configured. --ssh-path-override Override path used by SSH connection. Allows checksum calculation when SFTP and SSH paths are different. This issue affects among others Synology NAS boxes. Shared folders can be found in directories representing volumes rclone sync /home/local/directory remote:/directory --ssh-path-override /volume2/directory Home directory can be found in a shared folder called homes rclone sync /home/local/directory remote:/home/directory --ssh-path-override /volume1/homes/USER/directory Modified time Modified times are stored on the server to 1 second precision. Modified times are used in syncing and are fully supported. Some SFTP servers disable setting/modifying the file modification time after upload (for example, certain configurations of ProFTPd with mod_sftp). If you are using one of these servers, you can set the option set_modtime = false in your RClone backend configuration to disable this behaviour. Limitations SFTP supports checksums if the same login has shell access and md5sum or sha1sum as well as echo are in the remote's PATH. This remote checksumming (file hashing) is recommended and enabled by default. Disabling the checksumming may be required if you are connecting to SFTP servers which are not under your control, and to which the execution of remote commands is prohibited. Set the configuration option disable_hashcheck to true to disable checksumming. Note that some SFTP servers (eg Synology) the paths are different for SSH and SFTP so the hashes can't be calculated properly. For them using disable_hashcheck is a good idea. The only ssh agent supported under Windows is Putty's pageant. The Go SSH library disables the use of the aes128-cbc cipher by default, due to security concerns. This can be re-enabled on a per-connection basis by setting the use_insecure_cipher setting in the configuration file to true. Further details on the insecurity of this cipher can be found [in this paper] (http://www.isg.rhul.ac.uk/~kp/SandPfinal.pdf). SFTP isn't supported under plan9 until this issue is fixed. Note that since SFTP isn't HTTP based the following flags don't work with it: --dump-headers, --dump-bodies, --dump-auth Note that --timeout isn't supported (but --contimeout is). WebDAV Paths are specified as remote:path Paths may be as deep as required, eg remote:directory/subdirectory. To configure the WebDAV remote you will need to have a URL for it, and a username and password. If you know what kind of system you are connecting to then rclone can enable extra features. Here is an example of how to make a remote called remote. First run: rclone config This will guide you through an interactive setup process: No remotes found - make a new one n) New remote s) Set configuration password q) Quit config n/s/q> n name> remote Type of storage to configure. Choose a number from below, or type in your own value [snip] 22 / Webdav \ "webdav" [snip] Storage> webdav URL of http host to connect to Choose a number from below, or type in your own value 1 / Connect to example.com \ "https://example.com" url> https://example.com/remote.php/webdav/ Name of the Webdav site/service/software you are using Choose a number from below, or type in your own value 1 / Nextcloud \ "nextcloud" 2 / Owncloud \ "owncloud" 3 / Sharepoint \ "sharepoint" 4 / Other site/service or software \ "other" vendor> 1 User name user> user Password. y) Yes type in my own password g) Generate random password n) No leave this optional password blank y/g/n> y Enter the password: password: Confirm the password: password: Bearer token instead of user/pass (eg a Macaroon) bearer_token> Remote config -------------------- [remote] type = webdav url = https://example.com/remote.php/webdav/ vendor = nextcloud user = user pass = *** ENCRYPTED *** bearer_token = -------------------- y) Yes this is OK e) Edit this remote d) Delete this remote y/e/d> y Once configured you can then use rclone like this, List directories in top level of your WebDAV rclone lsd remote: List all the files in your WebDAV rclone ls remote: To copy a local directory to an WebDAV directory called backup rclone copy /home/source remote:backup Modified time and hashes Plain WebDAV does not support modified times. However when used with Owncloud or Nextcloud rclone will support modified times. Hashes are not supported. Provider notes See below for notes on specific providers. Owncloud Click on the settings cog in the bottom right of the page and this will show the WebDAV URL that rclone needs in the config step. It will look something like https://example.com/remote.php/webdav/. Owncloud supports modified times using the X-OC-Mtime header. Nextcloud This is configured in an identical way to Owncloud. Note that Nextcloud does not support streaming of files (rcat) whereas Owncloud does. This may be fixed in the future. Put.io put.io can be accessed in a read only way using webdav. Configure the url as https://webdav.put.io and use your normal account username and password for user and pass. Set the vendor to other. Your config file should end up looking like this: [putio] type = webdav url = https://webdav.put.io vendor = other user = YourUserName pass = encryptedpassword If you are using put.io with rclone mount then use the --read-only flag to signal to the OS that it can't write to the mount. For more help see the put.io webdav docs. Sharepoint Rclone can be used with Sharepoint provided by OneDrive for Business or Office365 Education Accounts. This feature is only needed for a few of these Accounts, mostly Office365 Education ones. These accounts are sometimes not verified by the domain owner github#1975 This means that these accounts can't be added using the official API (other Accounts should work with the "onedrive" option). However, it is possible to access them using webdav. To use a sharepoint remote with rclone, add it like this: First, you need to get your remote's URL: - Go here to open your OneDrive or to sign in - Now take a look at your address bar, the URL should look like this: https://[YOUR-DOMAIN]-my.sharepoint.com/personal/[YOUR-EMAIL]/_layouts/15/onedrive.aspx You'll only need this URL upto the email address. After that, you'll most likely want to add "/Documents". That subdirectory contains the actual data stored on your OneDrive. Add the remote to rclone like this: Configure the url as https://[YOUR-DOMAIN]-my.sharepoint.com/personal/[YOUR-EMAIL]/Documents and use your normal account email and password for user and pass. If you have 2FA enabled, you have to generate an app password. Set the vendor to sharepoint. Your config file should look like this: [sharepoint] type = webdav url = https://[YOUR-DOMAIN]-my.sharepoint.com/personal/[YOUR-EMAIL]/Documents vendor = other user = YourEmailAddress pass = encryptedpassword dCache dCache is a storage system with WebDAV doors that support, beside basic and x509, authentication with Macaroons (bearer tokens). Configure as normal using the other type. Don't enter a username or password, instead enter your Macaroon as the bearer_token. The config will end up looking something like this. [dcache] type = webdav url = https://dcache... vendor = other user = pass = bearer_token = your-macaroon There is a script that obtains a Macaroon from a dCache WebDAV endpoint, and creates an rclone config file. Yandex Disk Yandex Disk is a cloud storage solution created by Yandex. Yandex paths may be as deep as required, eg remote:directory/subdirectory. Here is an example of making a yandex configuration. First run rclone config This will guide you through an interactive setup process: No remotes found - make a new one n) New remote s) Set configuration password n/s> n name> remote Type of storage to configure. Choose a number from below, or type in your own value 1 / Amazon Drive \ "amazon cloud drive" 2 / Amazon S3 (also Dreamhost, Ceph, Minio) \ "s3" 3 / Backblaze B2 \ "b2" 4 / Dropbox \ "dropbox" 5 / Encrypt/Decrypt a remote \ "crypt" 6 / Google Cloud Storage (this is not Google Drive) \ "google cloud storage" 7 / Google Drive \ "drive" 8 / Hubic \ "hubic" 9 / Local Disk \ "local" 10 / Microsoft OneDrive \ "onedrive" 11 / Openstack Swift (Rackspace Cloud Files, Memset Memstore, OVH) \ "swift" 12 / SSH/SFTP Connection \ "sftp" 13 / Yandex Disk \ "yandex" Storage> 13 Yandex Client Id - leave blank normally. client_id> Yandex Client Secret - leave blank normally. client_secret> Remote config Use auto config? * Say Y if not sure * Say N if you are working on a remote or headless machine y) Yes n) No y/n> y If your browser doesn't open automatically go to the following link: http://127.0.0.1:53682/auth Log in and authorize rclone for access Waiting for code... Got code -------------------- [remote] client_id = client_secret = token = {"access_token":"xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx","token_type":"bearer","expiry":"2016-12-29T12:27:11.362788025Z"} -------------------- y) Yes this is OK e) Edit this remote d) Delete this remote y/e/d> y See the remote setup docs for how to set it up on a machine with no Internet browser available. Note that rclone runs a webserver on your local machine to collect the token as returned from Yandex Disk. This only runs from the moment it opens your browser to the moment you get back the verification code. This is on http://127.0.0.1:53682/ and this it may require you to unblock it temporarily if you are running a host firewall. Once configured you can then use rclone like this, See top level directories rclone lsd remote: Make a new directory rclone mkdir remote:directory List the contents of a directory rclone ls remote:directory Sync /home/local/directory to the remote path, deleting any excess files in the path. rclone sync /home/local/directory remote:directory --fast-list This remote supports --fast-list which allows you to use fewer transactions in exchange for more memory. See the rclone docs for more details. Modified time Modified times are supported and are stored accurate to 1 ns in custom metadata called rclone_modified in RFC3339 with nanoseconds format. MD5 checksums MD5 checksums are natively supported by Yandex Disk. Emptying Trash If you wish to empty your trash you can use the rclone cleanup remote: command which will permanently delete all your trashed files. This command does not take any path arguments. Local Filesystem Local paths are specified as normal filesystem paths, eg /path/to/wherever, so rclone sync /home/source /tmp/destination Will sync /home/source to /tmp/destination These can be configured into the config file for consistencies sake, but it is probably easier not to. Modified time Rclone reads and writes the modified time using an accuracy determined by the OS. Typically this is 1ns on Linux, 10 ns on Windows and 1 Second on OS X. Filenames Filenames are expected to be encoded in UTF-8 on disk. This is the normal case for Windows and OS X. There is a bit more uncertainty in the Linux world, but new distributions will have UTF-8 encoded files names. If you are using an old Linux filesystem with non UTF-8 file names (eg latin1) then you can use the convmv tool to convert the filesystem to UTF-8. This tool is available in most distributions' package managers. If an invalid (non-UTF8) filename is read, the invalid characters will be replaced with the unicode replacement character, '�'. rclone will emit a debug message in this case (use -v to see), eg Local file system at .: Replacing invalid UTF-8 characters in "gro\xdf" Long paths on Windows Rclone handles long paths automatically, by converting all paths to long UNC paths which allows paths up to 32,767 characters. This is why you will see that your paths, for instance c:\files is converted to the UNC path \\?\c:\files in the output, and \\server\share is converted to \\?\UNC\server\share. However, in rare cases this may cause problems with buggy file system drivers like EncFS. To disable UNC conversion globally, add this to your .rclone.conf file: [local] nounc = true If you want to selectively disable UNC, you can add it to a separate entry like this: [nounc] type = local nounc = true And use rclone like this: rclone copy c:\src nounc:z:\dst This will use UNC paths on c:\src but not on z:\dst. Of course this will cause problems if the absolute path length of a file exceeds 258 characters on z, so only use this option if you have to. Specific options Here are the command line options specific to local storage --copy-links, -L Normally rclone will ignore symlinks or junction points (which behave like symlinks under Windows). If you supply this flag then rclone will follow the symlink and copy the pointed to file or directory. This flag applies to all commands. For example, supposing you have a directory structure like this $ tree /tmp/a /tmp/a ├── b -> ../b ├── expected -> ../expected ├── one └── two └── three Then you can see the difference with and without the flag like this $ rclone ls /tmp/a 6 one 6 two/three and $ rclone -L ls /tmp/a 4174 expected 6 one 6 two/three 6 b/two 6 b/one --local-no-check-updated Don't check to see if the files change during upload. Normally rclone checks the size and modification time of files as they are being uploaded and aborts with a message which starts can't copy - source file is being updated if the file changes during upload. However on some file systems this modification time check may fail (eg Glusterfs #2206) so this check can be disabled with this flag. --local-no-unicode-normalization This flag is deprecated now. Rclone no longer normalizes unicode file names, but it compares them with unicode normalization in the sync routine instead. --one-file-system, -x This tells rclone to stay in the filesystem specified by the root and not to recurse into different file systems. For example if you have a directory hierarchy like this root ├── disk1 - disk1 mounted on the root │   └── file3 - stored on disk1 ├── disk2 - disk2 mounted on the root │   └── file4 - stored on disk12 ├── file1 - stored on the root disk └── file2 - stored on the root disk Using rclone --one-file-system copy root remote: will only copy file1 and file2. Eg $ rclone -q --one-file-system ls root 0 file1 0 file2 $ rclone -q ls root 0 disk1/file3 0 disk2/file4 0 file1 0 file2 NB Rclone (like most unix tools such as du, rsync and tar) treats a bind mount to the same device as being on the same filesystem. NB This flag is only available on Unix based systems. On systems where it isn't supported (eg Windows) it will not appear as an valid flag. --skip-links This flag disables warning messages on skipped symlinks or junction points, as you explicitly acknowledge that they should be skipped. CHANGELOG v1.42 - 2018-09-01 - New backends - Jottacloud (Sebastian Bünger) - New commands - copyurl: copies a URL to a remote (Denis) - New Features - Reworked config for backends (Nick Craig-Wood) - All backend config can now be supplied by command line, env var or config file - Advanced section in the config wizard for the optional items - A large step towards rclone backends being usable in other go software - Allow on the fly remotes with :backend: syntax - Stats revamp - Add --progress/-P flag to show interactive progress (Nick Craig-Wood) - Show the total progress of the sync in the stats (Nick Craig-Wood) - Add --stats-one-line flag for single line stats (Nick Craig-Wood) - Added weekday schedule into --bwlimit (Mateusz) - lsjson: Add option to show the original object IDs (Fabian Möller) - serve webdav: Make Content-Type without reading the file and add --etag-hash (Nick Craig-Wood) - build - Build macOS with native compiler (Nick Craig-Wood) - Update to use go1.11 for the build (Nick Craig-Wood) - rc - Added core/stats to return the stats (reddi1) - version --check: Prints the current release and beta versions (Nick Craig-Wood) - Bug Fixes - accounting - Fix time to completion estimates (Nick Craig-Wood) - Fix moving average speed for file stats (Nick Craig-Wood) - config: Fix error reading password from piped input (Nick Craig-Wood) - move: Fix --delete-empty-src-dirs flag to delete all empty dirs on move (ishuah) - Mount - Implement --daemon-timeout flag for OSXFUSE (Nick Craig-Wood) - Fix mount --daemon not working with encrypted config (Alex Chen) - Clip the number of blocks to 2^32-1 on macOS - fixes borg backup (Nick Craig-Wood) - VFS - Enable vfs-read-chunk-size by default (Fabian Möller) - Add the vfs/refresh rc command (Fabian Möller) - Add non recursive mode to vfs/refresh rc command (Fabian Möller) - Try to seek buffer on read only files (Fabian Möller) - Local - Fix crash when deprecated --local-no-unicode-normalization is supplied (Nick Craig-Wood) - Fix mkdir error when trying to copy files to the root of a drive on windows (Nick Craig-Wood) - Cache - Fix nil pointer deref when using lsjson on cached directory (Nick Craig-Wood) - Fix nil pointer deref for occasional crash on playback (Nick Craig-Wood) - Crypt - Fix accounting when checking hashes on upload (Nick Craig-Wood) - Amazon Cloud Drive - Make very clear in the docs that rclone has no ACD keys (Nick Craig-Wood) - Azure Blob - Add connection string and SAS URL auth (Nick Craig-Wood) - List the container to see if it exists (Nick Craig-Wood) - Port new Azure Blob Storage SDK (sandeepkru) - Added blob tier, tier between Hot, Cool and Archive. (sandeepkru) - Remove leading / from paths (Nick Craig-Wood) - B2 - Support Application Keys (Nick Craig-Wood) - Remove leading / from paths (Nick Craig-Wood) - Box - Fix upload of > 2GB files on 32 bit platforms (Nick Craig-Wood) - Make --box-commit-retries flag defaulting to 100 to fix large uploads (Nick Craig-Wood) - Drive - Add --drive-keep-revision-forever flag (lewapm) - Handle gdocs when filtering file names in list (Fabian Möller) - Support using --fast-list for large speedups (Fabian Möller) - FTP - Fix Put mkParentDir failed: 521 for BunnyCDN (Nick Craig-Wood) - Google Cloud Storage - Fix index out of range error with --fast-list (Nick Craig-Wood) - Jottacloud - Fix MD5 error check (Oliver Heyme) - Handle empty time values (Martin Polden) - Calculate missing MD5s (Oliver Heyme) - Docs, fixes and tests for MD5 calculation (Nick Craig-Wood) - Add optional MimeTyper interface. (Sebastian Bünger) - Implement optional About interface (for df support). (Sebastian Bünger) - Mega - Wait for events instead of arbitrary sleeping (Nick Craig-Wood) - Add --mega-hard-delete flag (Nick Craig-Wood) - Fix failed logins with upper case chars in email (Nick Craig-Wood) - Onedrive - Shared folder support (Yoni Jah) - Implement DirMove (Cnly) - Fix rmdir sometimes deleting directories with contents (Nick Craig-Wood) - Pcloud - Delete half uploaded files on upload error (Nick Craig-Wood) - Qingstor - Remove leading / from paths (Nick Craig-Wood) - S3 - Fix index out of range error with --fast-list (Nick Craig-Wood) - Add --s3-force-path-style (Nick Craig-Wood) - Add support for KMS Key ID (bsteiss) - Remove leading / from paths (Nick Craig-Wood) - Swift - Add storage_policy (Ruben Vandamme) - Make it so just storage_url or auth_token can be overidden (Nick Craig-Wood) - Fix server side copy bug for unusal file names (Nick Craig-Wood) - Remove leading / from paths (Nick Craig-Wood) - WebDAV - Ensure we call MKCOL with a URL with a trailing / for QNAP interop (Nick Craig-Wood) - If root ends with / then don't check if it is a file (Nick Craig-Wood) - Don't accept redirects when reading metadata (Nick Craig-Wood) - Add bearer token (Macaroon) support for dCache (Nick Craig-Wood) - Document dCache and Macaroons (Onno Zweers) - Sharepoint recursion with different depth (Henning) - Attempt to remove failed uploads (Nick Craig-Wood) - Yandex - Fix listing/deleting files in the root (Nick Craig-Wood) v1.42 - 2018-06-16 - New backends - OpenDrive (Oliver Heyme, Jakub Karlicek, ncw) - New commands - deletefile command (Filip Bartodziej) - New Features - copy, move: Copy single files directly, don't use --files-from work-around - this makes them much more efficient - Implement --max-transfer flag to quit transferring at a limit - make exit code 8 for --max-transfer exceeded - copy: copy empty source directories to destination (Ishuah Kariuki) - check: Add --one-way flag (Kasper Byrdal Nielsen) - Add siginfo handler for macOS for ctrl-T stats (kubatasiemski) - rc - add core/gc to run a garbage collection on demand - enable go profiling by default on the --rc port - return error from remote on failure - lsf - Add --absolute flag to add a leading / onto path names - Add --csv flag for compliant CSV output - Add 'm' format specifier to show the MimeType - Implement 'i' format for showing object ID - lsjson - Add MimeType to the output - Add ID field to output to show Object ID - Add --retries-sleep flag (Benjamin Joseph Dag) - Oauth tidy up web page and error handling (Henning Surmeier) - Bug Fixes - Password prompt output with --log-file fixed for unix (Filip Bartodziej) - Calculate ModifyWindow each time on the fly to fix various problems (Stefan Breunig) - Mount - Only print "File.rename error" if there actually is an error (Stefan Breunig) - Delay rename if file has open writers instead of failing outright (Stefan Breunig) - Ensure atexit gets run on interrupt - macOS enhancements - Make --noappledouble --noapplexattr - Add --volname flag and remove special chars from it - Make Get/List/Set/Remove xattr return ENOSYS for efficiency - Make --daemon work for macOS without CGO - VFS - Add --vfs-read-chunk-size and --vfs-read-chunk-size-limit (Fabian Möller) - Fix ChangeNotify for new or changed folders (Fabian Möller) - Local - Fix symlink/junction point directory handling under Windows - NB you will need to add -L to your command line to copy files with reparse points - Cache - Add non cached dirs on notifications (Remus Bunduc) - Allow root to be expired from rc (Remus Bunduc) - Clean remaining empty folders from temp upload path (Remus Bunduc) - Cache lists using batch writes (Remus Bunduc) - Use secure websockets for HTTPS Plex addresses (John Clayton) - Reconnect plex websocket on failures (Remus Bunduc) - Fix panic when running without plex configs (Remus Bunduc) - Fix root folder caching (Remus Bunduc) - Crypt - Check the crypted hash of files when uploading for extra data security - Dropbox - Make Dropbox for business folders accessible using an initial / in the path - Google Cloud Storage - Low level retry all operations if necessary - Google Drive - Add --drive-acknowledge-abuse to download flagged files - Add --drive-alternate-export to fix large doc export - Don't attempt to choose Team Drives when using rclone config create - Fix change list polling with team drives - Fix ChangeNotify for folders (Fabian Möller) - Fix about (and df on a mount) for team drives - Onedrive - Errorhandler for onedrive for business requests (Henning Surmeier) - S3 - Adjust upload concurrency with --s3-upload-concurrency (themylogin) - Fix --s3-chunk-size which was always using the minimum - SFTP - Add --ssh-path-override flag (Piotr Oleszczyk) - Fix slow downloads for long latency connections - Webdav - Add workarounds for biz.mail.ru - Ignore Reason-Phrase in status line to fix 4shared (Rodrigo) - Better error message generation v1.41 - 2018-04-28 - New backends - Mega support added - Webdav now supports SharePoint cookie authentication (hensur) - New commands - link: create public link to files and folders (Stefan Breunig) - about: gets quota info from a remote (a-roussos, ncw) - hashsum: a generic tool for any hash to produce md5sum like output - New Features - lsd: Add -R flag and fix and update docs for all ls commands - ncdu: added a "refresh" key - CTRL-L (Keith Goldfarb) - serve restic: Add append-only mode (Steve Kriss) - serve restic: Disallow overwriting files in append-only mode (Alexander Neumann) - serve restic: Print actual listener address (Matt Holt) - size: Add --json flag (Matthew Holt) - sync: implement --ignore-errors (Mateusz Pabian) - dedupe: Add dedupe largest functionality (Richard Yang) - fs: Extend SizeSuffix to include TB and PB for rclone about - fs: add --dump goroutines and --dump openfiles for debugging - rc: implement core/memstats to print internal memory usage info - rc: new call rc/pid (Michael P. Dubner) - Compile - Drop support for go1.6 - Release - Fix make tarball (Chih-Hsuan Yen) - Bug Fixes - filter: fix --min-age and --max-age together check - fs: limit MaxIdleConns and MaxIdleConnsPerHost in transport - lsd,lsf: make sure all times we output are in local time - rc: fix setting bwlimit to unlimited - rc: take note of the --rc-addr flag too as per the docs - Mount - Use About to return the correct disk total/used/free (eg in df) - Set --attr-timeout default to 1s - fixes: - rclone using too much memory - rclone not serving files to samba - excessive time listing directories - Fix df -i (upstream fix) - VFS - Filter files . and .. from directory listing - Only make the VFS cache if --vfs-cache-mode > Off - Local - Add --local-no-check-updated to disable updated file checks - Retry remove on Windows sharing violation error - Cache - Flush the memory cache after close - Purge file data on notification - Always forget parent dir for notifications - Integrate with Plex websocket - Add rc cache/stats (seuffert) - Add info log on notification - Box - Fix failure reading large directories - parse file/directory size as float - Dropbox - Fix crypt+obfuscate on dropbox - Fix repeatedly uploading the same files - FTP - Work around strange response from box FTP server - More workarounds for FTP servers to fix mkParentDir error - Fix no error on listing non-existent directory - Google Cloud Storage - Add service_account_credentials (Matt Holt) - Detect bucket presence by listing it - minimises permissions needed - Ignore zero length directory markers - Google Drive - Add service_account_credentials (Matt Holt) - Fix directory move leaving a hardlinked directory behind - Return proper google errors when Opening files - When initialized with a filepath, optional features used incorrect root path (Stefan Breunig) - HTTP - Fix sync for servers which don't return Content-Length in HEAD - Onedrive - Add QuickXorHash support for OneDrive for business - Fix socket leak in multipart session upload - S3 - Look in S3 named profile files for credentials - Add --s3-disable-checksum to disable checksum uploading (Chris Redekop) - Hierarchical configuration support (Giri Badanahatti) - Add in config for all the supported S3 providers - Add One Zone Infrequent Access storage class (Craig Rachel) - Add --use-server-modtime support (Peter Baumgartner) - Add --s3-chunk-size option to control multipart uploads - Ignore zero length directory markers - SFTP - Update docs to match code, fix typos and clarify disable_hashcheck prompt (Michael G. Noll) - Update docs with Synology quirks - Fail soft with a debug on hash failure - Swift - Add --use-server-modtime support (Peter Baumgartner) - Webdav - Support SharePoint cookie authentication (hensur) - Strip leading and trailing / off root v1.40 - 2018-03-19 - New backends - Alias backend to create aliases for existing remote names (Fabian Möller) - New commands - lsf: list for parsing purposes (Jakub Tasiemski) - by default this is a simple non recursive list of files and directories - it can be configured to add more info in an easy to parse way - serve restic: for serving a remote as a Restic REST endpoint - This enables restic to use any backends that rclone can access - Thanks Alexander Neumann for help, patches and review - rc: enable the remote control of a running rclone - The running rclone must be started with --rc and related flags. - Currently there is support for bwlimit, and flushing for mount and cache. - New Features - --max-delete flag to add a delete threshold (Bjørn Erik Pedersen) - All backends now support RangeOption for ranged Open - cat: Use RangeOption for limited fetches to make more efficient - cryptcheck: make reading of nonce more efficient with RangeOption - serve http/webdav/restic - support SSL/TLS - add --user --pass and --htpasswd for authentication - copy/move: detect file size change during copy/move and abort transfer (ishuah) - cryptdecode: added option to return encrypted file names. (ishuah) - lsjson: add --encrypted to show encrypted name (Jakub Tasiemski) - Add --stats-file-name-length to specify the printed file name length for stats (Will Gunn) - Compile - Code base was shuffled and factored - backends moved into a backend directory - large packages split up - See the CONTRIBUTING.md doc for info as to what lives where now - Update to using go1.10 as the default go version - Implement daily full integration tests - Release - Include a source tarball and sign it and the binaries - Sign the git tags as part of the release process - Add .deb and .rpm packages as part of the build - Make a beta release for all branches on the main repo (but not pull requests) - Bug Fixes - config: fixes errors on non existing config by loading config file only on first access - config: retry saving the config after failure (Mateusz) - sync: when using --backup-dir don't delete files if we can't set their modtime - this fixes odd behaviour with Dropbox and --backup-dir - fshttp: fix idle timeouts for HTTP connections - serve http: fix serving files with : in - fixes - Fix --exclude-if-present to ignore directories which it doesn't have permission for (Iakov Davydov) - Make accounting work properly with crypt and b2 - remove --no-traverse flag because it is obsolete - Mount - Add --attr-timeout flag to control attribute caching in kernel - this now defaults to 0 which is correct but less efficient - see the mount docs for more info - Add --daemon flag to allow mount to run in the background (ishuah) - Fix: Return ENOSYS rather than EIO on attempted link - This fixes FileZilla accessing an rclone mount served over sftp. - Fix setting modtime twice - Mount tests now run on CI for Linux (mount & cmount)/Mac/Windows - Many bugs fixed in the VFS layer - see below - VFS - Many fixes for --vfs-cache-mode writes and above - Update cached copy if we know it has changed (fixes stale data) - Clean path names before using them in the cache - Disable cache cleaner if --vfs-cache-poll-interval=0 - Fill and clean the cache immediately on startup - Fix Windows opening every file when it stats the file - Fix applying modtime for an open Write Handle - Fix creation of files when truncating - Write 0 bytes when flushing unwritten handles to avoid race conditions in FUSE - Downgrade "poll-interval is not supported" message to Info - Make OpenFile and friends return EINVAL if O_RDONLY and O_TRUNC - Local - Downgrade "invalid cross-device link: trying copy" to debug - Make DirMove return fs.ErrorCantDirMove to allow fallback to Copy for cross device - Fix race conditions updating the hashes - Cache - Add support for polling - cache will update when remote changes on supported backends - Reduce log level for Plex api - Fix dir cache issue - Implement --cache-db-wait-time flag - Improve efficiency with RangeOption and RangeSeek - Fix dirmove with temp fs enabled - Notify vfs when using temp fs - Offline uploading - Remote control support for path flushing - Amazon cloud drive - Rclone no longer has any working keys - disable integration tests - Implement DirChangeNotify to notify cache/vfs/mount of changes - Azureblob - Don't check for bucket/container presense if listing was OK - this makes rclone do one less request per invocation - Improve accounting for chunked uploads - Backblaze B2 - Don't check for bucket/container presense if listing was OK - this makes rclone do one less request per invocation - Box - Improve accounting for chunked uploads - Dropbox - Fix custom oauth client parameters - Google Cloud Storage - Don't check for bucket/container presense if listing was OK - this makes rclone do one less request per invocation - Google Drive - Migrate to api v3 (Fabian Möller) - Add scope configuration and root folder selection - Add --drive-impersonate for service accounts - thanks to everyone who tested, explored and contributed docs - Add --drive-use-created-date to use created date as modified date (nbuchanan) - Request the export formats only when required - This makes rclone quicker when there are no google docs - Fix finding paths with latin1 chars (a workaround for a drive bug) - Fix copying of a single Google doc file - Fix --drive-auth-owner-only to look in all directories - HTTP - Fix handling of directories with & in - Onedrive - Removed upload cutoff and always do session uploads - this stops the creation of multiple versions on business onedrive - Overwrite object size value with real size when reading file. (Victor) - this fixes oddities when onedrive misreports the size of images - Pcloud - Remove unused chunked upload flag and code - Qingstor - Don't check for bucket/container presense if listing was OK - this makes rclone do one less request per invocation - S3 - Support hashes for multipart files (Chris Redekop) - Initial support for IBM COS (S3) (Giri Badanahatti) - Update docs to discourage use of v2 auth with CEPH and others - Don't check for bucket/container presense if listing was OK - this makes rclone do one less request per invocation - Fix server side copy and set modtime on files with + in - SFTP - Add option to disable remote hash check command execution (Jon Fautley) - Add --sftp-ask-password flag to prompt for password when needed (Leo R. Lundgren) - Add set_modtime configuration option - Fix following of symlinks - Fix reading config file outside of Fs setup - Fix reading $USER in username fallback not $HOME - Fix running under crontab - Use correct OS way of reading username - Swift - Fix refresh of authentication token - in v1.39 a bug was introduced which ignored new tokens - this fixes it - Fix extra HEAD transaction when uploading a new file - Don't check for bucket/container presense if listing was OK - this makes rclone do one less request per invocation - Webdav - Add new time formats to support mydrive.ch and others v1.39 - 2017-12-23 - New backends - WebDAV - tested with nextcloud, owncloud, put.io and others! - Pcloud - cache - wraps a cache around other backends (Remus Bunduc) - useful in combination with mount - NB this feature is in beta so use with care - New commands - serve command with subcommands: - serve webdav: this implements a webdav server for any rclone remote. - serve http: command to serve a remote over HTTP - config: add sub commands for full config file management - create/delete/dump/edit/file/password/providers/show/update - touch: to create or update the timestamp of a file (Jakub Tasiemski) - New Features - curl install for rclone (Filip Bartodziej) - --stats now shows percentage, size, rate and ETA in condensed form (Ishuah Kariuki) - --exclude-if-present to exclude a directory if a file is present (Iakov Davydov) - rmdirs: add --leave-root flag (lewpam) - move: add --delete-empty-src-dirs flag to remove dirs after move (Ishuah Kariuki) - Add --dump flag, introduce --dump requests, responses and remove --dump-auth, --dump-filters - Obscure X-Auth-Token: from headers when dumping too - Document and implement exit codes for different failure modes (Ishuah Kariuki) - Compile - Bug Fixes - Retry lots more different types of errors to make multipart transfers more reliable - Save the config before asking for a token, fixes disappearing oauth config - Warn the user if --include and --exclude are used together (Ernest Borowski) - Fix duplicate files (eg on Google drive) causing spurious copies - Allow trailing and leading whitespace for passwords (Jason Rose) - ncdu: fix crashes on empty directories - rcat: fix goroutine leak - moveto/copyto: Fix to allow copying to the same name - Mount - --vfs-cache mode to make writes into mounts more reliable. - this requires caching files on the disk (see --cache-dir) - As this is a new feature, use with care - Use sdnotify to signal systemd the mount is ready (Fabian Möller) - Check if directory is not empty before mounting (Ernest Borowski) - Local - Add error message for cross file system moves - Fix equality check for times - Dropbox - Rework multipart upload - buffer the chunks when uploading large files so they can be retried - change default chunk size to 48MB now we are buffering them in memory - retry every error after the first chunk is done successfully - Fix error when renaming directories - Swift - Fix crash on bad authentication - Google Drive - Add service account support (Tim Cooijmans) - S3 - Make it work properly with Digital Ocean Spaces (Andrew Starr-Bochicchio) - Fix crash if a bad listing is received - Add support for ECS task IAM roles (David Minor) - Backblaze B2 - Fix multipart upload retries - Fix --hard-delete to make it work 100% of the time - Swift - Allow authentication with storage URL and auth key (Giovanni Pizzi) - Add new fields for swift configuration to support IBM Bluemix Swift (Pierre Carlson) - Add OS_TENANT_ID and OS_USER_ID to config - Allow configs with user id instead of user name - Check if swift segments container exists before creating (John Leach) - Fix memory leak in swift transfers (upstream fix) - SFTP - Add option to enable the use of aes128-cbc cipher (Jon Fautley) - Amazon cloud drive - Fix download of large files failing with "Only one auth mechanism allowed" - crypt - Option to encrypt directory names or leave them intact - Implement DirChangeNotify (Fabian Möller) - onedrive - Add option to choose resourceURL during setup of OneDrive Business account if more than one is available for user v1.38 - 2017-09-30 - New backends - Azure Blob Storage (thanks Andrei Dragomir) - Box - Onedrive for Business (thanks Oliver Heyme) - QingStor from QingCloud (thanks wuyu) - New commands - rcat - read from standard input and stream upload - tree - shows a nicely formatted recursive listing - cryptdecode - decode crypted file names (thanks ishuah) - config show - print the config file - config file - print the config file location - New Features - Empty directories are deleted on sync - dedupe - implement merging of duplicate directories - check and cryptcheck made more consistent and use less memory - cleanup for remaining remotes (thanks ishuah) - --immutable for ensuring that files don't change (thanks Jacob McNamee) - --user-agent option (thanks Alex McGrath Kraak) - --disable flag to disable optional features - --bind flag for choosing the local addr on outgoing connections - Support for zsh auto-completion (thanks bpicode) - Stop normalizing file names but do a normalized compare in sync - Compile - Update to using go1.9 as the default go version - Remove snapd build due to maintenance problems - Bug Fixes - Improve retriable error detection which makes multipart uploads better - Make check obey --ignore-size - Fix bwlimit toggle in conjunction with schedules (thanks cbruegg) - config ensures newly written config is on the same mount - Local - Revert to copy when moving file across file system boundaries - --skip-links to suppress symlink warnings (thanks Zhiming Wang) - Mount - Re-use rcat internals to support uploads from all remotes - Dropbox - Fix "entry doesn't belong in directory" error - Stop using deprecated API methods - Swift - Fix server side copy to empty container with --fast-list - Google Drive - Change the default for --drive-use-trash to true - S3 - Set session token when using STS (thanks Girish Ramakrishnan) - Glacier docs and error messages (thanks Jan Varho) - Read 1000 (not 1024) items in dir listings to fix Wasabi - Backblaze B2 - Fix SHA1 mismatch when downloading files with no SHA1 - Calculate missing hashes on the fly instead of spooling - --b2-hard-delete to permanently delete (not hide) files (thanks John Papandriopoulos) - Hubic - Fix creating containers - no longer have to use the default container - Swift - Optionally configure from a standard set of OpenStack environment vars - Add endpoint_type config - Google Cloud Storage - Fix bucket creation to work with limited permission users - SFTP - Implement connection pooling for multiple ssh connections - Limit new connections per second - Add support for MD5 and SHA1 hashes where available (thanks Christian Brüggemann) - HTTP - Fix URL encoding issues - Fix directories with : in - Fix panic with URL encoded content v1.37 - 2017-07-22 - New backends - FTP - thanks to Antonio Messina - HTTP - thanks to Vasiliy Tolstov - New commands - rclone ncdu - for exploring a remote with a text based user interface. - rclone lsjson - for listing with a machine readable output - rclone dbhashsum - to show Dropbox style hashes of files (local or Dropbox) - New Features - Implement --fast-list flag - This allows remotes to list recursively if they can - This uses less transactions (important if you pay for them) - This may or may not be quicker - This will use more memory as it has to hold the listing in memory - --old-sync-method deprecated - the remaining uses are covered by --fast-list - This involved a major re-write of all the listing code - Add --tpslimit and --tpslimit-burst to limit transactions per second - this is useful in conjuction with rclone mount to limit external apps - Add --stats-log-level so can see --stats without -v - Print password prompts to stderr - Hraban Luyat - Warn about duplicate files when syncing - Oauth improvements - allow auth_url and token_url to be set in the config file - Print redirection URI if using own credentials. - Don't Mkdir at the start of sync to save transactions - Compile - Update build to go1.8.3 - Require go1.6 for building rclone - Compile 386 builds with "GO386=387" for maximum compatibility - Bug Fixes - Fix menu selection when no remotes - Config saving reworked to not kill the file if disk gets full - Don't delete remote if name does not change while renaming - moveto, copyto: report transfers and checks as per move and copy - Local - Add --local-no-unicode-normalization flag - Bob Potter - Mount - Now supported on Windows using cgofuse and WinFsp - thanks to Bill Zissimopoulos for much help - Compare checksums on upload/download via FUSE - Unmount when program ends with SIGINT (Ctrl+C) or SIGTERM - Jérôme Vizcaino - On read only open of file, make open pending until first read - Make --read-only reject modify operations - Implement ModTime via FUSE for remotes that support it - Allow modTime to be changed even before all writers are closed - Fix panic on renames - Fix hang on errored upload - Crypt - Report the name:root as specified by the user - Add an "obfuscate" option for filename encryption - Stephen Harris - Amazon Drive - Fix initialization order for token renewer - Remove revoked credentials, allow oauth proxy config and update docs - B2 - Reduce minimum chunk size to 5MB - Drive - Add team drive support - Reduce bandwidth by adding fields for partial responses - Martin Kristensen - Implement --drive-shared-with-me flag to view shared with me files - Danny Tsai - Add --drive-trashed-only to read only the files in the trash - Remove obsolete --drive-full-list - Add missing seek to start on retries of chunked uploads - Fix stats accounting for upload - Convert / in names to a unicode equivalent (／) - Poll for Google Drive changes when mounted - OneDrive - Fix the uploading of files with spaces - Fix initialization order for token renewer - Display speeds accurately when uploading - Yoni Jah - Swap to using http://localhost:53682/ as redirect URL - Michael Ledin - Retry on token expired error, reset upload body on retry - Yoni Jah - Google Cloud Storage - Add ability to specify location and storage class via config and command line - thanks gdm85 - Create container if necessary on server side copy - Increase directory listing chunk to 1000 to increase performance - Obtain a refresh token for GCS - Steven Lu - Yandex - Fix the name reported in log messages (was empty) - Correct error return for listing empty directory - Dropbox - Rewritten to use the v2 API - Now supports ModTime - Can only set by uploading the file again - If you uploaded with an old rclone, rclone may upload everything again - Use --size-only or --checksum to avoid this - Now supports the Dropbox content hashing scheme - Now supports low level retries - S3 - Work around eventual consistency in bucket creation - Create container if necessary on server side copy - Add us-east-2 (Ohio) and eu-west-2 (London) S3 regions - Zahiar Ahmed - Swift, Hubic - Fix zero length directory markers showing in the subdirectory listing - this caused lots of duplicate transfers - Fix paged directory listings - this caused duplicate directory errors - Create container if necessary on server side copy - Increase directory listing chunk to 1000 to increase performance - Make sensible error if the user forgets the container - SFTP - Add support for using ssh key files - Fix under Windows - Fix ssh agent on Windows - Adapt to latest version of library - Igor Kharin v1.36 - 2017-03-18 - New Features - SFTP remote (Jack Schmidt) - Re-implement sync routine to work a directory at a time reducing memory usage - Logging revamped to be more inline with rsync - now much quieter * -v only shows transfers * -vv is for full debug * --syslog to log to syslog on capable platforms - Implement --backup-dir and --suffix - Implement --track-renames (initial implementation by Bjørn Erik Pedersen) - Add time-based bandwidth limits (Lukas Loesche) - rclone cryptcheck: checks integrity of crypt remotes - Allow all config file variables and options to be set from environment variables - Add --buffer-size parameter to control buffer size for copy - Make --delete-after the default - Add --ignore-checksum flag (fixed by Hisham Zarka) - rclone check: Add --download flag to check all the data, not just hashes - rclone cat: add --head, --tail, --offset, --count and --discard - rclone config: when choosing from a list, allow the value to be entered too - rclone config: allow rename and copy of remotes - rclone obscure: for generating encrypted passwords for rclone's config (T.C. Ferguson) - Comply with XDG Base Directory specification (Dario Giovannetti) - this moves the default location of the config file in a backwards compatible way - Release changes - Ubuntu snap support (Dedsec1) - Compile with go 1.8 - MIPS/Linux big and little endian support - Bug Fixes - Fix copyto copying things to the wrong place if the destination dir didn't exist - Fix parsing of remotes in moveto and copyto - Fix --delete-before deleting files on copy - Fix --files-from with an empty file copying everything - Fix sync: don't update mod times if --dry-run set - Fix MimeType propagation - Fix filters to add ** rules to directory rules - Local - Implement -L, --copy-links flag to allow rclone to follow symlinks - Open files in write only mode so rclone can write to an rclone mount - Fix unnormalised unicode causing problems reading directories - Fix interaction between -x flag and --max-depth - Mount - Implement proper directory handling (mkdir, rmdir, renaming) - Make include and exclude filters apply to mount - Implement read and write async buffers - control with --buffer-size - Fix fsync on for directories - Fix retry on network failure when reading off crypt - Crypt - Add --crypt-show-mapping to show encrypted file mapping - Fix crypt writer getting stuck in a loop - IMPORTANT this bug had the potential to cause data corruption when - reading data from a network based remote and - writing to a crypt on Google Drive - Use the cryptcheck command to validate your data if you are concerned - If syncing two crypt remotes, sync the unencrypted remote - Amazon Drive - Fix panics on Move (rename) - Fix panic on token expiry - B2 - Fix inconsistent listings and rclone check - Fix uploading empty files with go1.8 - Constrain memory usage when doing multipart uploads - Fix upload url not being refreshed properly - Drive - Fix Rmdir on directories with trashed files - Fix "Ignoring unknown object" when downloading - Add --drive-list-chunk - Add --drive-skip-gdocs (Károly Oláh) - OneDrive - Implement Move - Fix Copy - Fix overwrite detection in Copy - Fix waitForJob to parse errors correctly - Use token renewer to stop auth errors on long uploads - Fix uploading empty files with go1.8 - Google Cloud Storage - Fix depth 1 directory listings - Yandex - Fix single level directory listing - Dropbox - Normalise the case for single level directory listings - Fix depth 1 listing - S3 - Added ca-central-1 region (Jon Yergatian) v1.35 - 2017-01-02 - New Features - moveto and copyto commands for choosing a destination name on copy/move - rmdirs command to recursively delete empty directories - Allow repeated --include/--exclude/--filter options - Only show transfer stats on commands which transfer stuff - show stats on any command using the --stats flag - Allow overlapping directories in move when server side dir move is supported - Add --stats-unit option - thanks Scott McGillivray - Bug Fixes - Fix the config file being overwritten when two rclones are running - Make rclone lsd obey the filters properly - Fix compilation on mips - Fix not transferring files that don't differ in size - Fix panic on nil retry/fatal error - Mount - Retry reads on error - should help with reliability a lot - Report the modification times for directories from the remote - Add bandwidth accounting and limiting (fixes --bwlimit) - If --stats provided will show stats and which files are transferring - Support R/W files if truncate is set. - Implement statfs interface so df works - Note that write is now supported on Amazon Drive - Report number of blocks in a file - thanks Stefan Breunig - Crypt - Prevent the user pointing crypt at itself - Fix failed to authenticate decrypted block errors - these will now return the underlying unexpected EOF instead - Amazon Drive - Add support for server side move and directory move - thanks Stefan Breunig - Fix nil pointer deref on size attribute - B2 - Use new prefix and delimiter parameters in directory listings - This makes --max-depth 1 dir listings as used in mount much faster - Reauth the account while doing uploads too - should help with token expiry - Drive - Make DirMove more efficient and complain about moving the root - Create destination directory on Move() v1.34 - 2016-11-06 - New Features - Stop single file and --files-from operations iterating through the source bucket. - Stop removing failed upload to cloud storage remotes - Make ContentType be preserved for cloud to cloud copies - Add support to toggle bandwidth limits via SIGUSR2 - thanks Marco Paganini - rclone check shows count of hashes that couldn't be checked - rclone listremotes command - Support linux/arm64 build - thanks Fredrik Fornwall - Remove Authorization: lines from --dump-headers output - Bug Fixes - Ignore files with control characters in the names - Fix rclone move command - Delete src files which already existed in dst - Fix deletion of src file when dst file older - Fix rclone check on crypted file systems - Make failed uploads not count as "Transferred" - Make sure high level retries show with -q - Use a vendor directory with godep for repeatable builds - rclone mount - FUSE - Implement FUSE mount options - --no-modtime, --debug-fuse, --read-only, --allow-non-empty, --allow-root, --allow-other - --default-permissions, --write-back-cache, --max-read-ahead, --umask, --uid, --gid - Add --dir-cache-time to control caching of directory entries - Implement seek for files opened for read (useful for video players) - with -no-seek flag to disable - Fix crash on 32 bit ARM (alignment of 64 bit counter) - ...and many more internal fixes and improvements! - Crypt - Don't show encrypted password in configurator to stop confusion - Amazon Drive - New wait for upload option --acd-upload-wait-per-gb - upload timeouts scale by file size and can be disabled - Add 502 Bad Gateway to list of errors we retry - Fix overwriting a file with a zero length file - Fix ACD file size warning limit - thanks Felix Bünemann - Local - Unix: implement -x/--one-file-system to stay on a single file system - thanks Durval Menezes and Luiz Carlos Rumbelsperger Viana - Windows: ignore the symlink bit on files - Windows: Ignore directory based junction points - B2 - Make sure each upload has at least one upload slot - fixes strange upload stats - Fix uploads when using crypt - Fix download of large files (sha1 mismatch) - Return error when we try to create a bucket which someone else owns - Update B2 docs with Data usage, and Crypt section - thanks Tomasz Mazur - S3 - Command line and config file support for - Setting/overriding ACL - thanks Radek Senfeld - Setting storage class - thanks Asko Tamm - Drive - Make exponential backoff work exactly as per Google specification - add .epub, .odp and .tsv as export formats. - Swift - Don't read metadata for directory marker objects v1.33 - 2016-08-24 - New Features - Implement encryption - data encrypted in NACL secretbox format - with optional file name encryption - New commands - rclone mount - implements FUSE mounting of remotes (EXPERIMENTAL) - works on Linux, FreeBSD and OS X (need testers for the last 2!) - rclone cat - outputs remote file or files to the terminal - rclone genautocomplete - command to make a bash completion script for rclone - Editing a remote using rclone config now goes through the wizard - Compile with go 1.7 - this fixes rclone on macOS Sierra and on 386 processors - Use cobra for sub commands and docs generation - drive - Document how to make your own client_id - s3 - User-configurable Amazon S3 ACL (thanks Radek Šenfeld) - b2 - Fix stats accounting for upload - no more jumping to 100% done - On cleanup delete hide marker if it is the current file - New B2 API endpoint (thanks Per Cederberg) - Set maximum backoff to 5 Minutes - onedrive - Fix URL escaping in file names - eg uploading files with + in them. - amazon cloud drive - Fix token expiry during large uploads - Work around 408 REQUEST_TIMEOUT and 504 GATEWAY_TIMEOUT errors - local - Fix filenames with invalid UTF-8 not being uploaded - Fix problem with some UTF-8 characters on OS X v1.32 - 2016-07-13 - Backblaze B2 - Fix upload of files large files not in root v1.31 - 2016-07-13 - New Features - Reduce memory on sync by about 50% - Implement --no-traverse flag to stop copy traversing the destination remote. - This can be used to reduce memory usage down to the smallest possible. - Useful to copy a small number of files into a large destination folder. - Implement cleanup command for emptying trash / removing old versions of files - Currently B2 only - Single file handling improved - Now copied with --files-from - Automatically sets --no-traverse when copying a single file - Info on using installing with ansible - thanks Stefan Weichinger - Implement --no-update-modtime flag to stop rclone fixing the remote modified times. - Bug Fixes - Fix move command - stop it running for overlapping Fses - this was causing data loss. - Local - Fix incomplete hashes - this was causing problems for B2. - Amazon Drive - Rename Amazon Cloud Drive to Amazon Drive - no changes to config file needed. - Swift - Add support for non-default project domain - thanks Antonio Messina. - S3 - Add instructions on how to use rclone with minio. - Add ap-northeast-2 (Seoul) and ap-south-1 (Mumbai) regions. - Skip setting the modified time for objects > 5GB as it isn't possible. - Backblaze B2 - Add --b2-versions flag so old versions can be listed and retreived. - Treat 403 errors (eg cap exceeded) as fatal. - Implement cleanup command for deleting old file versions. - Make error handling compliant with B2 integrations notes. - Fix handling of token expiry. - Implement --b2-test-mode to set X-Bz-Test-Mode header. - Set cutoff for chunked upload to 200MB as per B2 guidelines. - Make upload multi-threaded. - Dropbox - Don't retry 461 errors. v1.30 - 2016-06-18 - New Features - Directory listing code reworked for more features and better error reporting (thanks to Klaus Post for help). This enables - Directory include filtering for efficiency - --max-depth parameter - Better error reporting - More to come - Retry more errors - Add --ignore-size flag - for uploading images to onedrive - Log -v output to stdout by default - Display the transfer stats in more human readable form - Make 0 size files specifiable with --max-size 0b - Add b suffix so we can specify bytes in --bwlimit, --min-size etc - Use "password:" instead of "password>" prompt - thanks Klaus Post and Leigh Klotz - Bug Fixes - Fix retry doing one too many retries - Local - Fix problems with OS X and UTF-8 characters - Amazon Drive - Check a file exists before uploading to help with 408 Conflict errors - Reauth on 401 errors - this has been causing a lot of problems - Work around spurious 403 errors - Restart directory listings on error - Google Drive - Check a file exists before uploading to help with duplicates - Fix retry of multipart uploads - Backblaze B2 - Implement large file uploading - S3 - Add AES256 server-side encryption for - thanks Justin R. Wilson - Google Cloud Storage - Make sure we don't use conflicting content types on upload - Add service account support - thanks Michal Witkowski - Swift - Add auth version parameter - Add domain option for openstack (v3 auth) - thanks Fabian Ruff v1.29 - 2016-04-18 - New Features - Implement -I, --ignore-times for unconditional upload - Improve dedupecommand - Now removes identical copies without asking - Now obeys --dry-run - Implement --dedupe-mode for non interactive running - --dedupe-mode interactive - interactive the default. - --dedupe-mode skip - removes identical files then skips anything left. - --dedupe-mode first - removes identical files then keeps the first one. - --dedupe-mode newest - removes identical files then keeps the newest one. - --dedupe-mode oldest - removes identical files then keeps the oldest one. - --dedupe-mode rename - removes identical files then renames the rest to be different. - Bug fixes - Make rclone check obey the --size-only flag. - Use "application/octet-stream" if discovered mime type is invalid. - Fix missing "quit" option when there are no remotes. - Google Drive - Increase default chunk size to 8 MB - increases upload speed of big files - Speed up directory listings and make more reliable - Add missing retries for Move and DirMove - increases reliability - Preserve mime type on file update - Backblaze B2 - Enable mod time syncing - This means that B2 will now check modification times - It will upload new files to update the modification times - (there isn't an API to just set the mod time.) - If you want the old behaviour use --size-only. - Update API to new version - Fix parsing of mod time when not in metadata - Swift/Hubic - Don't return an MD5SUM for static large objects - S3 - Fix uploading files bigger than 50GB v1.28 - 2016-03-01 - New Features - Configuration file encryption - thanks Klaus Post - Improve rclone config adding more help and making it easier to understand - Implement -u/--update so creation times can be used on all remotes - Implement --low-level-retries flag - Optionally disable gzip compression on downloads with --no-gzip-encoding - Bug fixes - Don't make directories if --dry-run set - Fix and document the move command - Fix redirecting stderr on unix-like OSes when using --log-file - Fix delete command to wait until all finished - fixes missing deletes. - Backblaze B2 - Use one upload URL per go routine fixes more than one upload using auth token - Add pacing, retries and reauthentication - fixes token expiry problems - Upload without using a temporary file from local (and remotes which support SHA1) - Fix reading metadata for all files when it shouldn't have been - Drive - Fix listing drive documents at root - Disable copy and move for Google docs - Swift - Fix uploading of chunked files with non ASCII characters - Allow setting of storage_url in the config - thanks Xavier Lucas - S3 - Allow IAM role and credentials from environment variables - thanks Brian Stengaard - Allow low privilege users to use S3 (check if directory exists during Mkdir) - thanks Jakub Gedeon - Amazon Drive - Retry on more things to make directory listings more reliable v1.27 - 2016-01-31 - New Features - Easier headless configuration with rclone authorize - Add support for multiple hash types - we now check SHA1 as well as MD5 hashes. - delete command which does obey the filters (unlike purge) - dedupe command to deduplicate a remote. Useful with Google Drive. - Add --ignore-existing flag to skip all files that exist on destination. - Add --delete-before, --delete-during, --delete-after flags. - Add --memprofile flag to debug memory use. - Warn the user about files with same name but different case - Make --include rules add their implict exclude * at the end of the filter list - Deprecate compiling with go1.3 - Amazon Drive - Fix download of files > 10 GB - Fix directory traversal ("Next token is expired") for large directory listings - Remove 409 conflict from error codes we will retry - stops very long pauses - Backblaze B2 - SHA1 hashes now checked by rclone core - Drive - Add --drive-auth-owner-only to only consider files owned by the user - thanks Björn Harrtell - Export Google documents - Dropbox - Make file exclusion error controllable with -q - Swift - Fix upload from unprivileged user. - S3 - Fix updating of mod times of files with + in. - Local - Add local file system option to disable UNC on Windows. v1.26 - 2016-01-02 - New Features - Yandex storage backend - thank you Dmitry Burdeev ("dibu") - Implement Backblaze B2 storage backend - Add --min-age and --max-age flags - thank you Adriano Aurélio Meirelles - Make ls/lsl/md5sum/size/check obey includes and excludes - Fixes - Fix crash in http logging - Upload releases to github too - Swift - Fix sync for chunked files - OneDrive - Re-enable server side copy - Don't mask HTTP error codes with JSON decode error - S3 - Fix corrupting Content-Type on mod time update (thanks Joseph Spurrier) v1.25 - 2015-11-14 - New features - Implement Hubic storage system - Fixes - Fix deletion of some excluded files without --delete-excluded - This could have deleted files unexpectedly on sync - Always check first with --dry-run! - Swift - Stop SetModTime losing metadata (eg X-Object-Manifest) - This could have caused data loss for files > 5GB in size - Use ContentType from Object to avoid lookups in listings - OneDrive - disable server side copy as it seems to be broken at Microsoft v1.24 - 2015-11-07 - New features - Add support for Microsoft OneDrive - Add --no-check-certificate option to disable server certificate verification - Add async readahead buffer for faster transfer of big files - Fixes - Allow spaces in remotes and check remote names for validity at creation time - Allow '&' and disallow ':' in Windows filenames. - Swift - Ignore directory marker objects where appropriate - allows working with Hubic - Don't delete the container if fs wasn't at root - S3 - Don't delete the bucket if fs wasn't at root - Google Cloud Storage - Don't delete the bucket if fs wasn't at root v1.23 - 2015-10-03 - New features - Implement rclone size for measuring remotes - Fixes - Fix headless config for drive and gcs - Tell the user they should try again if the webserver method failed - Improve output of --dump-headers - S3 - Allow anonymous access to public buckets - Swift - Stop chunked operations logging "Failed to read info: Object Not Found" - Use Content-Length on uploads for extra reliability v1.22 - 2015-09-28 - Implement rsync like include and exclude flags - swift - Support files > 5GB - thanks Sergey Tolmachev v1.21 - 2015-09-22 - New features - Display individual transfer progress - Make lsl output times in localtime - Fixes - Fix allowing user to override credentials again in Drive, GCS and ACD - Amazon Drive - Implement compliant pacing scheme - Google Drive - Make directory reads concurrent for increased speed. v1.20 - 2015-09-15 - New features - Amazon Drive support - Oauth support redone - fix many bugs and improve usability - Use "golang.org/x/oauth2" as oauth libary of choice - Improve oauth usability for smoother initial signup - drive, googlecloudstorage: optionally use auto config for the oauth token - Implement --dump-headers and --dump-bodies debug flags - Show multiple matched commands if abbreviation too short - Implement server side move where possible - local - Always use UNC paths internally on Windows - fixes a lot of bugs - dropbox - force use of our custom transport which makes timeouts work - Thanks to Klaus Post for lots of help with this release v1.19 - 2015-08-28 - New features - Server side copies for s3/swift/drive/dropbox/gcs - Move command - uses server side copies if it can - Implement --retries flag - tries 3 times by default - Build for plan9/amd64 and solaris/amd64 too - Fixes - Make a current version download with a fixed URL for scripting - Ignore rmdir in limited fs rather than throwing error - dropbox - Increase chunk size to improve upload speeds massively - Issue an error message when trying to upload bad file name v1.18 - 2015-08-17 - drive - Add --drive-use-trash flag so rclone trashes instead of deletes - Add "Forbidden to download" message for files with no downloadURL - dropbox - Remove datastore - This was deprecated and it caused a lot of problems - Modification times and MD5SUMs no longer stored - Fix uploading files > 2GB - s3 - use official AWS SDK from github.com/aws/aws-sdk-go - NB will most likely require you to delete and recreate remote - enable multipart upload which enables files > 5GB - tested with Ceph / RadosGW / S3 emulation - many thanks to Sam Liston and Brian Haymore at the Utah Center for High Performance Computing for a Ceph test account - misc - Show errors when reading the config file - Do not print stats in quiet mode - thanks Leonid Shalupov - Add FAQ - Fix created directories not obeying umask - Linux installation instructions - thanks Shimon Doodkin v1.17 - 2015-06-14 - dropbox: fix case insensitivity issues - thanks Leonid Shalupov v1.16 - 2015-06-09 - Fix uploading big files which was causing timeouts or panics - Don't check md5sum after download with --size-only v1.15 - 2015-06-06 - Add --checksum flag to only discard transfers by MD5SUM - thanks Alex Couper - Implement --size-only flag to sync on size not checksum & modtime - Expand docs and remove duplicated information - Document rclone's limitations with directories - dropbox: update docs about case insensitivity v1.14 - 2015-05-21 - local: fix encoding of non utf-8 file names - fixes a duplicate file problem - drive: docs about rate limiting - google cloud storage: Fix compile after API change in "google.golang.org/api/storage/v1" v1.13 - 2015-05-10 - Revise documentation (especially sync) - Implement --timeout and --conntimeout - s3: ignore etags from multipart uploads which aren't md5sums v1.12 - 2015-03-15 - drive: Use chunked upload for files above a certain size - drive: add --drive-chunk-size and --drive-upload-cutoff parameters - drive: switch to insert from update when a failed copy deletes the upload - core: Log duplicate files if they are detected v1.11 - 2015-03-04 - swift: add region parameter - drive: fix crash on failed to update remote mtime - In remote paths, change native directory separators to / - Add synchronization to ls/lsl/lsd output to stop corruptions - Ensure all stats/log messages to go stderr - Add --log-file flag to log everything (including panics) to file - Make it possible to disable stats printing with --stats=0 - Implement --bwlimit to limit data transfer bandwidth v1.10 - 2015-02-12 - s3: list an unlimited number of items - Fix getting stuck in the configurator v1.09 - 2015-02-07 - windows: Stop drive letters (eg C:) getting mixed up with remotes (eg drive:) - local: Fix directory separators on Windows - drive: fix rate limit exceeded errors v1.08 - 2015-02-04 - drive: fix subdirectory listing to not list entire drive - drive: Fix SetModTime - dropbox: adapt code to recent library changes v1.07 - 2014-12-23 - google cloud storage: fix memory leak v1.06 - 2014-12-12 - Fix "Couldn't find home directory" on OSX - swift: Add tenant parameter - Use new location of Google API packages v1.05 - 2014-08-09 - Improved tests and consequently lots of minor fixes - core: Fix race detected by go race detector - core: Fixes after running errcheck - drive: reset root directory on Rmdir and Purge - fs: Document that Purger returns error on empty directory, test and fix - google cloud storage: fix ListDir on subdirectory - google cloud storage: re-read metadata in SetModTime - s3: make reading metadata more reliable to work around eventual consistency problems - s3: strip trailing / from ListDir() - swift: return directories without / in ListDir v1.04 - 2014-07-21 - google cloud storage: Fix crash on Update v1.03 - 2014-07-20 - swift, s3, dropbox: fix updated files being marked as corrupted - Make compile with go 1.1 again v1.02 - 2014-07-19 - Implement Dropbox remote - Implement Google Cloud Storage remote - Verify Md5sums and Sizes after copies - Remove times from "ls" command - lists sizes only - Add add "lsl" - lists times and sizes - Add "md5sum" command v1.01 - 2014-07-04 - drive: fix transfer of big files using up lots of memory v1.00 - 2014-07-03 - drive: fix whole second dates v0.99 - 2014-06-26 - Fix --dry-run not working - Make compatible with go 1.1 v0.98 - 2014-05-30 - s3: Treat missing Content-Length as 0 for some ceph installations - rclonetest: add file with a space in v0.97 - 2014-05-05 - Implement copying of single files - s3 & swift: support paths inside containers/buckets v0.96 - 2014-04-24 - drive: Fix multiple files of same name being created - drive: Use o.Update and fs.Put to optimise transfers - Add version number, -V and --version v0.95 - 2014-03-28 - rclone.org: website, docs and graphics - drive: fix path parsing v0.94 - 2014-03-27 - Change remote format one last time - GNU style flags v0.93 - 2014-03-16 - drive: store token in config file - cross compile other versions - set strict permissions on config file v0.92 - 2014-03-15 - Config fixes and --config option v0.91 - 2014-03-15 - Make config file v0.90 - 2013-06-27 - Project named rclone v0.00 - 2012-11-18 - Project started Bugs and Limitations Empty directories are left behind / not created With remotes that have a concept of directory, eg Local and Drive, empty directories may be left behind, or not created when one was expected. This is because rclone doesn't have a concept of a directory - it only works on objects. Most of the object storage systems can't actually store a directory so there is nowhere for rclone to store anything about directories. You can work round this to some extent with thepurge command which will delete everything under the path, INLUDING empty directories. This may be fixed at some point in Issue #100 Directory timestamps aren't preserved For the same reason as the above, rclone doesn't have a concept of a directory - it only works on objects, therefore it can't preserve the timestamps of directories. Frequently Asked Questions Do all cloud storage systems support all rclone commands Yes they do. All the rclone commands (eg sync, copy etc) will work on all the remote storage systems. Can I copy the config from one machine to another Sure! Rclone stores all of its config in a single file. If you want to find this file, the simplest way is to run rclone -h and look at the help for the --config flag which will tell you where it is. See the remote setup docs for more info. How do I configure rclone on a remote / headless box with no browser? This has now been documented in its own remote setup page. Can rclone sync directly from drive to s3 Rclone can sync between two remote cloud storage systems just fine. Note that it effectively downloads the file and uploads it again, so the node running rclone would need to have lots of bandwidth. The syncs would be incremental (on a file by file basis). Eg rclone sync drive:Folder s3:bucket Using rclone from multiple locations at the same time You can use rclone from multiple places at the same time if you choose different subdirectory for the output, eg Server A> rclone sync /tmp/whatever remote:ServerA Server B> rclone sync /tmp/whatever remote:ServerB If you sync to the same directory then you should use rclone copy otherwise the two rclones may delete each others files, eg Server A> rclone copy /tmp/whatever remote:Backup Server B> rclone copy /tmp/whatever remote:Backup The file names you upload from Server A and Server B should be different in this case, otherwise some file systems (eg Drive) may make duplicates. Why doesn't rclone support partial transfers / binary diffs like rsync? Rclone stores each file you transfer as a native object on the remote cloud storage system. This means that you can see the files you upload as expected using alternative access methods (eg using the Google Drive web interface). There is a 1:1 mapping between files on your hard disk and objects created in the cloud storage system. Cloud storage systems (at least none I've come across yet) don't support partially uploading an object. You can't take an existing object, and change some bytes in the middle of it. It would be possible to make a sync system which stored binary diffs instead of whole objects like rclone does, but that would break the 1:1 mapping of files on your hard disk to objects in the remote cloud storage system. All the cloud storage systems support partial downloads of content, so it would be possible to make partial downloads work. However to make this work efficiently this would require storing a significant amount of metadata, which breaks the desired 1:1 mapping of files to objects. Can rclone do bi-directional sync? No, not at present. rclone only does uni-directional sync from A -> B. It may do in the future though since it has all the primitives - it just requires writing the algorithm to do it. Can I use rclone with an HTTP proxy? Yes. rclone will use the environment variables HTTP_PROXY, HTTPS_PROXY and NO_PROXY, similar to cURL and other programs. HTTPS_PROXY takes precedence over HTTP_PROXY for https requests. The environment values may be either a complete URL or a "host[:port]", in which case the "http" scheme is assumed. The NO_PROXY allows you to disable the proxy for specific hosts. Hosts must be comma separated, and can contain domains or parts. For instance "foo.com" also matches "bar.foo.com". Rclone gives x509: failed to load system roots and no roots provided error This means that rclone can't file the SSL root certificates. Likely you are running rclone on a NAS with a cut-down Linux OS, or possibly on Solaris. Rclone (via the Go runtime) tries to load the root certificates from these places on Linux. "/etc/ssl/certs/ca-certificates.crt", // Debian/Ubuntu/Gentoo etc. "/etc/pki/tls/certs/ca-bundle.crt", // Fedora/RHEL "/etc/ssl/ca-bundle.pem", // OpenSUSE "/etc/pki/tls/cacert.pem", // OpenELEC So doing something like this should fix the problem. It also sets the time which is important for SSL to work properly. mkdir -p /etc/ssl/certs/ curl -o /etc/ssl/certs/ca-certificates.crt https://raw.githubusercontent.com/bagder/ca-bundle/master/ca-bundle.crt ntpclient -s -h pool.ntp.org The two environment variables SSL_CERT_FILE and SSL_CERT_DIR, mentioned in the x509 pacakge, provide an additional way to provide the SSL root certificates. Note that you may need to add the --insecure option to the curl command line if it doesn't work without. curl --insecure -o /etc/ssl/certs/ca-certificates.crt https://raw.githubusercontent.com/bagder/ca-bundle/master/ca-bundle.crt Rclone gives Failed to load config file: function not implemented error Likely this means that you are running rclone on Linux version not supported by the go runtime, ie earlier than version 2.6.23. See the system requirements section in the go install docs for full details. All my uploaded docx/xlsx/pptx files appear as archive/zip This is caused by uploading these files from a Windows computer which hasn't got the Microsoft Office suite installed. The easiest way to fix is to install the Word viewer and the Microsoft Office Compatibility Pack for Word, Excel, and PowerPoint 2007 and later versions' file formats tcp lookup some.domain.com no such host This happens when rclone cannot resolve a domain. Please check that your DNS setup is generally working, e.g. # both should print a long list of possible IP addresses dig www.googleapis.com # resolve using your default DNS dig www.googleapis.com @8.8.8.8 # resolve with Google's DNS server If you are using systemd-resolved (default on Arch Linux), ensure it is at version 233 or higher. Previous releases contain a bug which causes not all domains to be resolved properly. Additionally with the GODEBUG=netdns= environment variable the Go resolver decision can be influenced. This also allows to resolve certain issues with DNS resolution. See the name resolution section in the go docs. License This is free software under the terms of MIT the license (check the COPYING file included with the source code). Copyright (C) 2012 by Nick Craig-Wood https://www.craig-wood.com/nick/ Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Authors - Nick Craig-Wood nick@craig-wood.com Contributors - Alex Couper amcouper@gmail.com - Leonid Shalupov leonid@shalupov.com shalupov@diverse.org.ru - Shimon Doodkin helpmepro1@gmail.com - Colin Nicholson colin@colinn.com - Klaus Post klauspost@gmail.com - Sergey Tolmachev tolsi.ru@gmail.com - Adriano Aurélio Meirelles adriano@atinge.com - C. Bess cbess@users.noreply.github.com - Dmitry Burdeev dibu28@gmail.com - Joseph Spurrier github@josephspurrier.com - Björn Harrtell bjorn@wololo.org - Xavier Lucas xavier.lucas@corp.ovh.com - Werner Beroux werner@beroux.com - Brian Stengaard brian@stengaard.eu - Jakub Gedeon jgedeon@sofi.com - Jim Tittsler jwt@onjapan.net - Michal Witkowski michal@improbable.io - Fabian Ruff fabian.ruff@sap.com - Leigh Klotz klotz@quixey.com - Romain Lapray lapray.romain@gmail.com - Justin R. Wilson jrw972@gmail.com - Antonio Messina antonio.s.messina@gmail.com - Stefan G. Weichinger office@oops.co.at - Per Cederberg cederberg@gmail.com - Radek Šenfeld rush@logic.cz - Fredrik Fornwall fredrik@fornwall.net - Asko Tamm asko@deekit.net - xor-zz xor@gstocco.com - Tomasz Mazur tmazur90@gmail.com - Marco Paganini paganini@paganini.net - Felix Bünemann buenemann@louis.info - Durval Menezes jmrclone@durval.com - Luiz Carlos Rumbelsperger Viana maxd13_luiz_carlos@hotmail.com - Stefan Breunig stefan-github@yrden.de - Alishan Ladhani ali-l@users.noreply.github.com - 0xJAKE 0xJAKE@users.noreply.github.com - Thibault Molleman thibaultmol@users.noreply.github.com - Scott McGillivray scott.mcgillivray@gmail.com - Bjørn Erik Pedersen bjorn.erik.pedersen@gmail.com - Lukas Loesche lukas@mesosphere.io - emyarod allllaboutyou@gmail.com - T.C. Ferguson tcf909@gmail.com - Brandur brandur@mutelight.org - Dario Giovannetti dev@dariogiovannetti.net - Károly Oláh okaresz@aol.com - Jon Yergatian jon@macfanatic.ca - Jack Schmidt github@mowsey.org - Dedsec1 Dedsec1@users.noreply.github.com - Hisham Zarka hzarka@gmail.com - Jérôme Vizcaino jerome.vizcaino@gmail.com - Mike Tesch mjt6129@rit.edu - Marvin Watson marvwatson@users.noreply.github.com - Danny Tsai danny8376@gmail.com - Yoni Jah yonjah+git@gmail.com yonjah+github@gmail.com - Stephen Harris github@spuddy.org - Ihor Dvoretskyi ihor.dvoretskyi@gmail.com - Jon Craton jncraton@gmail.com - Hraban Luyat hraban@0brg.net - Michael Ledin mledin89@gmail.com - Martin Kristensen me@azgul.com - Too Much IO toomuchio@users.noreply.github.com - Anisse Astier anisse@astier.eu - Zahiar Ahmed zahiar@live.com - Igor Kharin igorkharin@gmail.com - Bill Zissimopoulos billziss@navimatics.com - Bob Potter bobby.potter@gmail.com - Steven Lu tacticalazn@gmail.com - Sjur Fredriksen sjurtf@ifi.uio.no - Ruwbin hubus12345@gmail.com - Fabian Möller fabianm88@gmail.com f.moeller@nynex.de - Edward Q. Bridges github@eqbridges.com - Vasiliy Tolstov v.tolstov@selfip.ru - Harshavardhana harsha@minio.io - sainaen sainaen@gmail.com - gdm85 gdm85@users.noreply.github.com - Yaroslav Halchenko debian@onerussian.com - John Papandriopoulos jpap@users.noreply.github.com - Zhiming Wang zmwangx@gmail.com - Andy Pilate cubox@cubox.me - Oliver Heyme olihey@googlemail.com olihey@users.noreply.github.com de8olihe@lego.com - wuyu wuyu@yunify.com - Andrei Dragomir adragomi@adobe.com - Christian Brüggemann mail@cbruegg.com - Alex McGrath Kraak amkdude@gmail.com - bpicode bjoern.pirnay@googlemail.com - Daniel Jagszent daniel@jagszent.de - Josiah White thegenius2009@gmail.com - Ishuah Kariuki kariuki@ishuah.com ishuah91@gmail.com - Jan Varho jan@varho.org - Girish Ramakrishnan girish@cloudron.io - LingMan LingMan@users.noreply.github.com - Jacob McNamee jacobmcnamee@gmail.com - jersou jertux@gmail.com - thierry thierry@substantiel.fr - Simon Leinen simon.leinen@gmail.com ubuntu@s3-test.novalocal - Dan Dascalescu ddascalescu+github@gmail.com - Jason Rose jason@jro.io - Andrew Starr-Bochicchio a.starr.b@gmail.com - John Leach john@johnleach.co.uk - Corban Raun craun@instructure.com - Pierre Carlson mpcarl@us.ibm.com - Ernest Borowski er.borowski@gmail.com - Remus Bunduc remus.bunduc@gmail.com - Iakov Davydov iakov.davydov@unil.ch dav05.gith@myths.ru - Jakub Tasiemski tasiemski@gmail.com - David Minor dminor@saymedia.com - Tim Cooijmans cooijmans.tim@gmail.com - Laurence liuxy6@gmail.com - Giovanni Pizzi gio.piz@gmail.com - Filip Bartodziej filipbartodziej@gmail.com - Jon Fautley jon@dead.li - lewapm 32110057+lewapm@users.noreply.github.com - Yassine Imounachen yassine256@gmail.com - Chris Redekop chris-redekop@users.noreply.github.com chris.redekop@gmail.com - Jon Fautley jon@adenoid.appstal.co.uk - Will Gunn WillGunn@users.noreply.github.com - Lucas Bremgartner lucas@bremis.ch - Jody Frankowski jody.frankowski@gmail.com - Andreas Roussos arouss1980@gmail.com - nbuchanan nbuchanan@utah.gov - Durval Menezes rclone@durval.com - Victor vb-github@viblo.se - Mateusz pabian.mateusz@gmail.com - Daniel Loader spicypixel@gmail.com - David0rk davidork@gmail.com - Alexander Neumann alexander@bumpern.de - Giri Badanahatti gbadanahatti@us.ibm.com@Giris-MacBook-Pro.local - Leo R. Lundgren leo@finalresort.org - wolfv wolfv6@users.noreply.github.com - Dave Pedu dave@davepedu.com - Stefan Lindblom lindblom@spotify.com - seuffert oliver@seuffert.biz - gbadanahatti 37121690+gbadanahatti@users.noreply.github.com - Keith Goldfarb barkofdelight@gmail.com - Steve Kriss steve@heptio.com - Chih-Hsuan Yen yan12125@gmail.com - Alexander Neumann fd0@users.noreply.github.com - Matt Holt mholt@users.noreply.github.com - Eri Bastos bastos.eri@gmail.com - Michael P. Dubner pywebmail@list.ru - Antoine GIRARD sapk@users.noreply.github.com - Mateusz Piotrowski mpp302@gmail.com - Animosity022 animosity22@users.noreply.github.com - Peter Baumgartner pete@lincolnloop.com - Craig Rachel craig@craigrachel.com - Michael G. Noll miguno@users.noreply.github.com - hensur me@hensur.de - Oliver Heyme de8olihe@lego.com - Richard Yang richard@yenforyang.com - Piotr Oleszczyk piotr.oleszczyk@gmail.com - Rodrigo rodarima@gmail.com - NoLooseEnds NoLooseEnds@users.noreply.github.com - Jakub Karlicek jakub@karlicek.me - John Clayton john@codemonkeylabs.com - Kasper Byrdal Nielsen byrdal76@gmail.com - Benjamin Joseph Dag bjdag1234@users.noreply.github.com - themylogin themylogin@gmail.com - Onno Zweers onno.zweers@surfsara.nl - Jasper Lievisse Adriaanse jasper@humppa.nl - sandeepkru sandeep.ummadi@gmail.com - HerrH atomtigerzoo@users.noreply.github.com - Andrew 4030760+sparkyman215@users.noreply.github.com - dan smith XX1011@gmail.com - Oleg Kovalov iamolegkovalov@gmail.com - Ruben Vandamme github-com-00ff86@vandamme.email - Cnly minecnly@gmail.com - Andres Alvarez 1671935+kir4h@users.noreply.github.com - reddi1 xreddi@gmail.com - Matt Tucker matthewtckr@gmail.com - Sebastian Bünger buengese@gmail.com - Martin Polden mpolden@mpolden.no - Alex Chen Cnly@users.noreply.github.com - Denis deniskovpen@gmail.com - bsteiss 35940619+bsteiss@users.noreply.github.com CONTACT THE RCLONE PROJECT Forum Forum for general discussions and questions: - https://forum.rclone.org Gitub project The project website is at: - https://github.com/ncw/rclone There you can file bug reports, ask for help or contribute pull requests. Google+ Rclone has a Google+ page which announcements are posted to - Google+ page for general comments Twitter You can also follow me on twitter for rclone announcements - [@njcw](https://twitter.com/njcw) Email Or if all else fails or you want to ask something private or confidential email Nick Craig-Wood