rclone/docs/content/rc.md

title	description	date
Remote Control	Remote controlling rclone	2018-03-05

Remote controlling rclone

If rclone is run with the --rc flag then it starts an http server
which can be used to remote control rclone.

NB this is experimental and everything here is subject to change!

Supported parameters

--rc

Flag to start the http server listen on remote requests

--rc-addr=IP

IPaddress:Port or :Port to bind server to. (default "localhost:5572")

--rc-cert=KEY

SSL PEM key (concatenation of certificate and CA certificate)

--rc-client-ca=PATH

Client certificate authority to verify clients with

--rc-htpasswd=PATH

htpasswd file - if not provided no authentication is done

--rc-key=PATH

SSL PEM Private key

--rc-max-header-bytes=VALUE

Maximum size of request header (default 4096)

--rc-user=VALUE

User name for authentication.

--rc-pass=VALUE

Password for authentication.

--rc-realm=VALUE

Realm for authentication (default "rclone")

--rc-server-read-timeout=DURATION

Timeout for server reading data (default 1h0m0s)

--rc-server-write-timeout=DURATION

Timeout for server writing data (default 1h0m0s)

Accessing the remote control via the rclone rc command

Rclone itself implements the remote control protocol in its rclone rc command.

You can use it like this

$ rclone rc rc/noop param1=one param2=two
{
	"param1": "one",
	"param2": "two"
}

Run rclone rc on its own to see the help for the installed remote
control commands.

Supported commands

cache/expire: Purge a remote from cache

Purge a remote from the cache backend. Supports either a directory or a file.
Params:

• remote = path to remote (required)
• withData = true/false to delete cached data (chunks) as well (optional)

Eg

rclone rc cache/expire remote=path/to/sub/folder/
rclone rc cache/expire remote=/ withData=true

cache/stats: Get cache stats

Show statistics for the cache remote.

core/bwlimit: Set the bandwidth limit.

This sets the bandwidth limit to that passed in.

Eg

rclone rc core/bwlimit rate=1M
rclone rc core/bwlimit rate=off

The format of the parameter is exactly the same as passed to --bwlimit
except only one bandwidth may be specified.

core/gc: Runs a garbage collection.

This tells the go runtime to do a garbage collection run. It isn't
necessary to call this normally, but it can be useful for debugging
memory problems.

core/memstats: Returns the memory statistics

This returns the memory statistics of the running program. What the values mean
are explained in the go docs: https://golang.org/pkg/runtime/#MemStats

The most interesting values for most people are:

• HeapAlloc: This is the amount of memory rclone is actually using
• HeapSys: This is the amount of memory rclone has obtained from the OS
• Sys: this is the total amount of memory requested from the OS
  • It is virtual memory so may include unused memory

core/pid: Return PID of current process

This returns PID of current process.
Useful for stopping rclone process.

core/stats: Returns stats about current transfers.

This returns all available stats

rclone rc core/stats

Returns the following values:

{
	"speed": average speed in bytes/sec since start of the process,
	"bytes": total transferred bytes since the start of the process,
	"errors": number of errors,
	"checks": number of checked files,
	"transfers": number of transferred files,
	"deletes" : number of deleted files,
	"elapsedTime": time in seconds since the start of the process,
	"lastError": last occurred error,
	"transferring": an array of currently active file transfers:
		[
			{
				"bytes": total transferred bytes for this file,
				"eta": estimated time in seconds until file transfer completion
				"name": name of the file,
				"percentage": progress of the file transfer in percent,
				"speed": speed in bytes/sec,
				"speedAvg": speed in bytes/sec as an exponentially weighted moving average,
				"size": size of the file in bytes
			}
		],
	"checking": an array of names of currently active file checks
		[]
}

Values for "transferring", "checking" and "lastError" are only assigned if data is available.
The value for "eta" is null if an eta cannot be determined.

rc/error: This returns an error

This returns an error with the input as part of its error string.
Useful for testing error handling.

rc/list: List all the registered remote control commands

This lists all the registered remote control commands as a JSON map in
the commands response.

rc/noop: Echo the input to the output parameters

This echoes the input parameters to the output parameters for testing
purposes. It can be used to check that rclone is still alive and to
check that parameter passing is working properly.

vfs/forget: Forget files or directories in the directory cache.

This forgets the paths in the directory cache causing them to be
re-read from the remote when needed.

If no paths are passed in then it will forget all the paths in the
directory cache.

rclone rc vfs/forget

Otherwise pass files or dirs in as file=path or dir=path. Any
parameter key starting with file will forget that file and any
starting with dir will forget that dir, eg

rclone rc vfs/forget file=hello file2=goodbye dir=home/junk

vfs/refresh: Refresh the directory cache.

This reads the directories for the specified paths and freshens the
directory cache.

If no paths are passed in then it will refresh the root directory.

rclone rc vfs/refresh

Otherwise pass directories in as dir=path. Any parameter key
starting with dir will refresh that directory, eg

rclone rc vfs/refresh dir=home/junk dir2=data/misc

If the parameter recursive=true is given the whole directory tree
will get refreshed. This refresh will use --fast-list if enabled.

Accessing the remote control via HTTP

Rclone implements a simple HTTP based protocol.

Each endpoint takes an JSON object and returns a JSON object or an
error. The JSON objects are essentially a map of string names to
values.

All calls must made using POST.

The input objects can be supplied using URL parameters, POST
parameters or by supplying "Content-Type: application/json" and a JSON
blob in the body. There are examples of these below using curl.

The response will be a JSON blob in the body of the response. This is
formatted to be reasonably human readable.

If an error occurs then there will be an HTTP error status (usually
400) and the body of the response will contain a JSON encoded error
object.

The sever implements basic CORS support and allows all origins for that.
The response to a preflight OPTIONS request will echo the requested "Access-Control-Request-Headers" back.

Using POST with URL parameters only

curl -X POST 'http://localhost:5572/rc/noop/?potato=1&sausage=2'

Response

{
	"potato": "1",
	"sausage": "2"
}

Here is what an error response looks like:

curl -X POST 'http://localhost:5572/rc/error/?potato=1&sausage=2'

{
	"error": "arbitrary error on input map[potato:1 sausage:2]",
	"input": {
		"potato": "1",
		"sausage": "2"
	}
}

Note that curl doesn't return errors to the shell unless you use the -f option

$ curl -f -X POST 'http://localhost:5572/rc/error/?potato=1&sausage=2'
curl: (22) The requested URL returned error: 400 Bad Request
$ echo $?
22

Using POST with a form

curl --data "potato=1" --data "sausage=2" http://localhost:5572/rc/noop/

Response

{
	"potato": "1",
	"sausage": "2"
}

Note that you can combine these with URL parameters too with the POST
parameters taking precedence.

curl --data "potato=1" --data "sausage=2" "http://localhost:5572/rc/noop/?rutabaga=3&sausage=4"

Response

{
	"potato": "1",
	"rutabaga": "3",
	"sausage": "4"
}

Using POST with a JSON blob

curl -H "Content-Type: application/json" -X POST -d '{"potato":2,"sausage":1}' http://localhost:5572/rc/noop/

response

{
	"password": "xyz",
	"username": "xyz"
}

This can be combined with URL parameters too if required. The JSON
blob takes precedence.

curl -H "Content-Type: application/json" -X POST -d '{"potato":2,"sausage":1}' 'http://localhost:5572/rc/noop/?rutabaga=3&potato=4'

{
	"potato": 2,
	"rutabaga": "3",
	"sausage": 1
}

Debugging rclone with pprof

If you use the --rc flag this will also enable the use of the go
profiling tools on the same port.

To use these, first install go.

Then (for example) to profile rclone's memory use you can run:

go tool pprof -web http://localhost:5572/debug/pprof/heap

This should open a page in your browser showing what is using what
memory.

You can also use the -text flag to produce a textual summary

$ go tool pprof -text http://localhost:5572/debug/pprof/heap
Showing nodes accounting for 1537.03kB, 100% of 1537.03kB total
      flat  flat%   sum%        cum   cum%
 1024.03kB 66.62% 66.62%  1024.03kB 66.62%  github.com/ncw/rclone/vendor/golang.org/x/net/http2/hpack.addDecoderNode
     513kB 33.38%   100%      513kB 33.38%  net/http.newBufioWriterSize
         0     0%   100%  1024.03kB 66.62%  github.com/ncw/rclone/cmd/all.init
         0     0%   100%  1024.03kB 66.62%  github.com/ncw/rclone/cmd/serve.init
         0     0%   100%  1024.03kB 66.62%  github.com/ncw/rclone/cmd/serve/restic.init
         0     0%   100%  1024.03kB 66.62%  github.com/ncw/rclone/vendor/golang.org/x/net/http2.init
         0     0%   100%  1024.03kB 66.62%  github.com/ncw/rclone/vendor/golang.org/x/net/http2/hpack.init
         0     0%   100%  1024.03kB 66.62%  github.com/ncw/rclone/vendor/golang.org/x/net/http2/hpack.init.0
         0     0%   100%  1024.03kB 66.62%  main.init
         0     0%   100%      513kB 33.38%  net/http.(*conn).readRequest
         0     0%   100%      513kB 33.38%  net/http.(*conn).serve
         0     0%   100%  1024.03kB 66.62%  runtime.main

Possible profiles to look at:

• Memory: go tool pprof http://localhost:5572/debug/pprof/heap
• 30-second CPU profile: go tool pprof http://localhost:5572/debug/pprof/profile
• 5-second execution trace: wget http://localhost:5572/debug/pprof/trace?seconds=5

See the net/http/pprof docs
for more info on how to use the profiling and for a general overview
see the Go team's blog post on profiling go programs.

The profiling hook is zero overhead unless it is used.