Previously it used a width of >= 80 to display the long word count
format. However I personally found that a bit too wide, while other
sections will be shortened too much which does not really look nice.
Therefore, adjust the limit a bit, using the short word count format for
windows up to 85 characters.
This fixes a bug that causes a mangled statusline. The bug occurs, when
the `displayed_head_limit` variable is set and causes the substring
expression to take a substring, which ends in the middle of a multi-byte
character.
This patch replaces the byte-based methods for measuring the
length of the branch name and creating a substring with methods that are
character-based and multi-byte aware.
It also has the nice side effect of making the length measuring more
accurate, by taking the actual display width of multi-byte characters
and the ambiwidth setting into account.
Since we need to take into account older Vim 7.4 (which might not have
the strcharpart() function), do introduce a compatibility wrapper in
airline#util that checks for the existence of the function before using
it. Older Vims will keep on using the byte-based index. I suppose Vim
7.4 before the strcharpart() function was available (patch 7.4.1730)
shouldn't be in use anymore.
closes#1948
When `g:skip_empty_sections` is set, `:AirlineRefresh` can be called
very often and cause slow down, because it forcefully re-creates the
highlighting groups. This is mostly not needed for the redraw to happen,
therefore, add the `<bang>` attribute to the command, making it skip to
re-create the highlighting groups and have all extensions that rely on a
forced update use the `!` form.
Should be much fast then.
fixes#1908
as requested by the exception thrown:
fugitive: A third-party plugin or vimrc is calling
fugitive#buffer().commit() which has been removed. Replace it with
matchstr(FugitiveParse()[0], '^\x\+')
if the same highlighting group is used on the left and right for the
label, the `airline_tablabel_to_airline_tabmod` will be overwritten on
the right side, causing the fg/bg colors to be wrong, because on the
right side they have to be the opposite of the left side.
So use a separate highlighting group for the tablabel on the right.
closes#1902
The 'autochdir' option could be toggled on later in a session.
So do not set the has_autochdir flag once the file is read, but evaluate
it every time the corresponding function is called.
While at it, get rid of the s:fmod variable. Instead let a helper
function return the correct modifier flags depending on the value of the
'autochdir' option.
The magic flags were in the wrong order, %e is the number of errors, it
should go in the parentheses after the # symbol. %fe is the line number
of the first error. Same for the warnings.
This allows for advanced customization where the shortening of the
branch name is up to the caller, unlike before.
This change is observable from the outside, and as such can be
dangerous. But AFAIK it does not change the default behavior.
This removes the hardcoded minwidth limits for both the `hunks` and
`branch` parts. It replaces these with safe accesses to the `minwidth`
setting as done by `airline#parts#define_minwidth`.
Partly revert commit 105e9daaf7
and fix#1857 another way, by making sure, that buffers are not taking
away from the s:current_visible_buffers list.
Fixes#1857Fixes#1872
Do not scatter the autocommands around, but rather move the auto command
to the main plugin file. The function that handles the auto command will
be created in the autoload script.
Also add a call to force updating the tabline, if g:airline_statusline_ontop
is defined.
In addition, the wordcount() extension did not correctly notice
block-wise visual mode, so while creating the airline#mode_changed()
function, make the mode also detect blockwise visual mode correctly.
This is an experimental feature that allows to display the statusline in
the tabline. It might still be a bit rough, but seems to work so far.
Remaining problem:
- Mode changes are not immediately detected, only after moving the
cursor
fixes#1388closes#1867
currently, empty buffer names were still considered to match against the
exclude_path setting. That does not make sense, so skip the check for
empty bufnames.
I have never touched anything in this file, nor in the LanguageClient plugin, so the copyright attribution is incorrect. @neersighted may also wish to be removed from the list here.
the ```t:undotree.GetStatusLine()``` is appended to the status line when ```t:undotree``` exists, but it seems like the ```statusline``` will be executed when ```t:undtree``` is no longer available during window destruction.
At the moment you can never be sure whether you look at the results
that ale just produced after your last changes or you are looking at
outdated information.
Instead of showing the last results while ale executes checks on the
current buffer it can now show a specific indicator.
This commit introduces the new config variable
`g:airline#extensions#ale#checking_symbol` which defaults to "...". In
case you don't want to see this, you may set it to an empty string.
Previously the ale refresh was triggered after user interactions only.
When linting takes some time and the user is not actively working the
ale information was not updated while the things ale directly controls
were updated. This change makes showing linting results a loot smoother.
for older Vims, the wordcount extension falls back to `g<c-g>` and
parses the messaage that is generated.
When doing so, it expects the English locale, which might not be true.
Therefore, try to regex parse the result without using the english words
(assuming the output is still in the same order as in English).
Compatibility:
- Don't use a script-local function to update the format strings
- Protect against `:normal!' moving the cursor on on the wordcount check
Bugfix:
- Let to_string() try to return something for all values
- Now returns correctly when passed both 0 and '0'
Upkeep:
- Simplify check again no valid key from winwidth()
- Old wordcount check: use matchstr() - more expressive and fewer steps
- Improve documentation style/clarity/detail
v:t_list is an internal variable describing the type of a list.
Unfortunately, this is not available in older vims. So let's fall back
to using `type([])`
see #1795
This prevents a warning message, when the function is tried to add
several times. Also while at it, add a '!' so that no error is thrown if
the file is sourced a second times.
Checking for wordcount changes now uses a b:changedtick comparison in
the statusline funcref. The autocommand strategy that used to do this is
removed, simplifying the code.
- Formatter is now only called when the wordcount changes
- ...#apply() now only compares against the filetype list when necessary
- Old format() function is no longer called for (unsupported) counting
of visual words
- Misc code quality improvements
Various improvements:
- Seperate out visual mode detection.
- Use TextChanged rather than CursorMoved where supported.
- Let users specify the filetypes for which wordcounting is enabled
with a list rather than a pattern.
- Move the filetype check to when airline is refreshed, as opposed to
on every update; autocommands are not created if wordcounting is
disabled
Currently the formatter, and not the wordcount plugin, is responsible
for providing the wordcount as well as formatting it. The default
formatter allows visual mode word counting, although this is not
documented.
The new interface - a transform() function, allows the main wordcount
plugin to internalise this logic. Providing the wordcount simplifies
formatter implementations:
- All formatters can display the visual wordcount.
- Formatters do not have to worry about compatibility with different
vim versions.
The old format() function can now be deprecated, although the wordcount
plugin retains compatibility with formatters using it. The default
formatter will also be used as a fallback if no suitable function is
found.
The default formatter is rewritten to use the new interface.
Add 'arduino' filetype to list of C-like languages. This is needed in
order to avoid mix-indent-file warnings when using hard tabs for
indentation in Arduino source files (*.ino, *.pde) containing top level
block comments with leading space before a '*'.
Similar to: 460ed02864
Original fix: 8fde76dd63
for some reasons, calling async functions might cause an error, if a
SourcePre command has been defined. So explicitly call the functions
using `:noa` modifier to prevent triggering the SourcePre autocommand.
fixes#1742
closes#1730
- Make sure to always call the term extension on TermOpen autocommands
- consistently use the airline_term highlighting group
- hard code the airline_term highlighting group, because by the time the
function airline#themes#patch() is called the highlighting group
airline_c would no be defined, so we cannot dynamically get those
attributes
- In the documentation, mention how the g:airline_mode_map can be set
including the terminal section
The default formatter uses a hand-build regexp for shortening the path
in the tabline. However, since it uses the \w regex atom, this won't
match e.g. cyrillic letters.
To fix this, use the builtin pathshorten() function which does handle
this case correctly. For a test, use e.g. 'D/Учёба/t.c'
closes#1737
this caused that the branch extension was not correctly working anymore
because of a refactoring of fugitive tpope/vim-fugitive@5d11ff7
Solution: Move the existence check for the fugitive plugin into a
separate function and call it from there in all places that check the
fugitive plugin. Do the same for lawrencium and vcscommand check.
fixes#605#1739
Startify unfortunately does not set the buftype option, so the
`[noperm]` would be shown, since the buffer is not really a file.
(see mhinz/vim-startify#324)
So allow to blacklist startify from this setting. To do so, the logic
from the tabline extension was refactored out into a separate function
that returns true, if the buffer matches
`g:airline#extensions#tabline#ignore_bufadd_pat` and that function is
then reused for the readonly() function as well.
Instead of requiring each version control plugin to modify airline to
show the current branch, provide a customization function we can check
instead.
Following the example of airline_theme_patch_func, you define the
variable like so:
let g:airline#extensions#branch#custom_head = 'david#svn#get_branch'
Custom functions should cache their value. They may need an autocmd to
invalidate their cache:
" Use a buffer-unique group name to prevent clearing autocmds for other
" buffers.
exec 'augroup svndavid-'. bufnr("%")
au!
autocmd BufWinLeave <buffer> unlet! b:svndavid_branch
augroup END
This change lets me integrate with vc.vim (I couldn't get VCSCommand
working for svn) or write my own thing for perforce.
Additionally, always load whole file and check for existence.
Instead of determining up front whether various scm plugins are
installed, check for them on use so they can be added after this script
is sourced.
This also mitigates the problem of checking for existence of autoload
functions (which are not loaded by exist()). Since we're checking
root-level functions, they're likely to be loaded once we're using any
part of the plugin.
275ec4fe63 broke this so that numbering
started from 0 instead of 1 with
g:airline#extensions#tabline#buffer_idx_mode = 1
Specifically, I overlooked that |index| actually tracked the index of
the current buffer in the buffer list *starting from 1*, whereas I
assumed it tracked the true index (starting from 0).
airline#extensions#tabline#buflist#list doesn't pick up some buffers
(most notably Netrw buffers), so there are sometimes no buffers to show
and the tabline code fails with an error. This avoids that situation.
It would be better to detect these and show titles for them, but for now
this restores the old behaviour.
previously, the branch extension used name[0:6], however that would
break with multibyte characters, since this is a byte index and not a
character index.
fixes#1686
This also adds a compatability wrapper, so that versions older than
Vim 7.3 are supported.
This is inspired by, and includes s:strchars from, @ruipgpinheiro's
commit e2d1295a3d3708e8d2a5eb30cac840fc9520bb8b