Various improvements:
- Seperate out visual mode detection.
- Use TextChanged rather than CursorMoved where supported.
- Let users specify the filetypes for which wordcounting is enabled
with a list rather than a pattern.
- Move the filetype check to when airline is refreshed, as opposed to
on every update; autocommands are not created if wordcounting is
disabled
Currently the formatter, and not the wordcount plugin, is responsible
for providing the wordcount as well as formatting it. The default
formatter allows visual mode word counting, although this is not
documented.
The new interface - a transform() function, allows the main wordcount
plugin to internalise this logic. Providing the wordcount simplifies
formatter implementations:
- All formatters can display the visual wordcount.
- Formatters do not have to worry about compatibility with different
vim versions.
The old format() function can now be deprecated, although the wordcount
plugin retains compatibility with formatters using it. The default
formatter will also be used as a fallback if no suitable function is
found.
The default formatter is rewritten to use the new interface.
Add 'arduino' filetype to list of C-like languages. This is needed in
order to avoid mix-indent-file warnings when using hard tabs for
indentation in Arduino source files (*.ino, *.pde) containing top level
block comments with leading space before a '*'.
Similar to: 460ed02864
Original fix: 8fde76dd63
for some reasons, calling async functions might cause an error, if a
SourcePre command has been defined. So explicitly call the functions
using `:noa` modifier to prevent triggering the SourcePre autocommand.
fixes#1742
closes#1730
- Make sure to always call the term extension on TermOpen autocommands
- consistently use the airline_term highlighting group
- hard code the airline_term highlighting group, because by the time the
function airline#themes#patch() is called the highlighting group
airline_c would no be defined, so we cannot dynamically get those
attributes
- In the documentation, mention how the g:airline_mode_map can be set
including the terminal section
The default formatter uses a hand-build regexp for shortening the path
in the tabline. However, since it uses the \w regex atom, this won't
match e.g. cyrillic letters.
To fix this, use the builtin pathshorten() function which does handle
this case correctly. For a test, use e.g. 'D/Учёба/t.c'
closes#1737
this caused that the branch extension was not correctly working anymore
because of a refactoring of fugitive tpope/vim-fugitive@5d11ff7
Solution: Move the existence check for the fugitive plugin into a
separate function and call it from there in all places that check the
fugitive plugin. Do the same for lawrencium and vcscommand check.
fixes#605#1739
Startify unfortunately does not set the buftype option, so the
`[noperm]` would be shown, since the buffer is not really a file.
(see mhinz/vim-startify#324)
So allow to blacklist startify from this setting. To do so, the logic
from the tabline extension was refactored out into a separate function
that returns true, if the buffer matches
`g:airline#extensions#tabline#ignore_bufadd_pat` and that function is
then reused for the readonly() function as well.
Recently, NERDTree added the &readonly setting to its buffer.
Unfortunately, this caused airline to render the '[noperm]' string in
it.
Fix this by only making the readonly check for buffers that actually
represent files (e.g. the buftype option is empty).
Instead of requiring each version control plugin to modify airline to
show the current branch, provide a customization function we can check
instead.
Following the example of airline_theme_patch_func, you define the
variable like so:
let g:airline#extensions#branch#custom_head = 'david#svn#get_branch'
Custom functions should cache their value. They may need an autocmd to
invalidate their cache:
" Use a buffer-unique group name to prevent clearing autocmds for other
" buffers.
exec 'augroup svndavid-'. bufnr("%")
au!
autocmd BufWinLeave <buffer> unlet! b:svndavid_branch
augroup END
This change lets me integrate with vc.vim (I couldn't get VCSCommand
working for svn) or write my own thing for perforce.
Additionally, always load whole file and check for existence.
Instead of determining up front whether various scm plugins are
installed, check for them on use so they can be added after this script
is sourced.
This also mitigates the problem of checking for existence of autoload
functions (which are not loaded by exist()). Since we're checking
root-level functions, they're likely to be loaded once we're using any
part of the plugin.
275ec4fe63 broke this so that numbering
started from 0 instead of 1 with
g:airline#extensions#tabline#buffer_idx_mode = 1
Specifically, I overlooked that |index| actually tracked the index of
the current buffer in the buffer list *starting from 1*, whereas I
assumed it tracked the true index (starting from 0).
airline#extensions#tabline#buflist#list doesn't pick up some buffers
(most notably Netrw buffers), so there are sometimes no buffers to show
and the tabline code fails with an error. This avoids that situation.
It would be better to detect these and show titles for them, but for now
this restores the old behaviour.
previously, the branch extension used name[0:6], however that would
break with multibyte characters, since this is a byte index and not a
character index.
fixes#1686
This also adds a compatability wrapper, so that versions older than
Vim 7.3 are supported.
This is inspired by, and includes s:strchars from, @ruipgpinheiro's
commit e2d1295a3d3708e8d2a5eb30cac840fc9520bb8b
When the uniq_tail formatter is used, the buffer name is not refreshed
when running through the duplicates. Fix that by getting the correct
buffer name again.
fixes#1680
This fixes the conflict of both plugins redifining the 'file' (or 'path')
function. Closes#1670.
As fugitiveline modifies the path display and bufferline replaces it,
the latter should be the plugin to be used if both are activated.
A new variable named cursormode_mode_func is used to store the function
returning the current mode. This allows more customization in the mapping.
The default value is the built-in mode function so there is no change in
behavior.
Add some documentation.
Signed-off-by: Thomas Faivre <thomas.faivre@6wind.com>
looks like this:
```
let a=(condition ? s:var:'')
```
confuses older Vims and it complains about a missing colon. So make
parsing a bit easier and add a space in front of the second colon.
fixes#1629
commit ab49a1c7ae changed that no leading whitespace was added.
While this removed a double space in front of the current active
selected buffer, it removed one space too much for the non-current
buffers in the bufferline.
So partly reverse it and only add the space, if the highlighting groups
between each item did not change.
previously, when both tabs and buffers were displayed in the tabline, it
was not immediately obvious which side belongs to a buffer and which one
to a tab. Therefore, add [buffers]/[tabs] labels consistently.
under certains circumstances it could happen that for the vim-ctrlspace
tabline extension a tabline group was redefined which would cause a
separator having foreground and background color swapped. This was
caused by using the 'pos' parameter for the right side wrongly.
fixes#1559
rather let them be defined whenever they are needed. They were only used
inside a single function anyhow, so it does not make sense to cache
them. In addition, having the user later change the variable won't work
as expected.
The initial reason in #237 is not valid anymore, as vim-gitgutter
functions as expected for editing files that are not part of a repo,
whether they are:
- in a different repo
- in a parent repo (cwd being a submodule)
- outside of the repo
Furthermore, removing this check allows to show relevant info for
specific fugitive file names that are fugitive://..../sha1//...
which are hard to parse manually, especially in complicated situations
such as submodules.
The function shows the line number of the first error/warning that appears in the current buffer. If there are 20 warnings and the first warning exists on line 33, then vim-airline would show "W:20(L33)".
One can change how the line number is represented using: `g:airline#extensions#ale#open_lnum_symbol` and `airline#extensions#ale#close_lnum_symbol`
skip anything that matches abort
e.g. running hg qtop with Vims path outside of the repository returns
something like "abort: no repository found in ..."
in that case, do not show anything.
commit 232b641 did unfortunately disable tagbar completely, since
exists("*func") does not autoload the function.
So this time, try explicitly calling the function once, and if it does
not exists, it should be disabled and not cause any further errors.
closes#1555
rename g:airline#init#async variable to g:airline#init#vim_async
because that is what it is for: showing whether vim supports async. Is
not set vor nvim, because nvim always supports jobs.
This enables the highlighting caching only when the variable
g:airline_highlighting_cache is set to 1
Should make airline faster and more performant, because we can save a
lot of expensive C core calls. However, when redefining highlighting
groups, it might not correctly reset the cache.
do not access get() function twice. We can assign the result to a
variable and use it a second time. Should speed up the highligther part
of the code by a bit.
Since I was already touching s:Get(), also get rid of the default
parameter, as it always has been the empty string.
When using vim-gitgutter and fugitive:
The hunks extension and the branch extension work as expected when the
file is first loaded; both parts are added to the statusline.
Once the cursor is moved and stopped for &updatetime ms:
1. The branch extension clears b:airline_head on CursorHold
2. Somehow (?) airline#statusline gets called on CursorHold
3. The hunks extension returns '' when b:airline_head is empty, causing
the hunks to be removed from the statusline.
It doesn't make sense to clear airline_head just because the cursor
moved, and the commit message adding the line doesn't say why:
13297cee03
Commit 174b7e1962 relies on airline_head
being set.
Debug detail:
Executing CursorHold Auto commands for "*"
autocommand unlet! b:airline_head
[...]
continuing in CursorHold Auto commands for "*"
calling function airline#statusline(1)
[...]
line 1: return exists('*airline#extensions#branch#head') && empty(get(b:, 'airline_head', ''))
function airline#extensions#hunks#get_hunks[13]..<SNR>32_get_hunks[14]..<SNR>32_get_hunks_gitgutter[1]..<SNR>32_is_branch_empty returning #1
function airline#extensions#hunks#get_hunks[13]..<SNR>32_get_hunks[14]..<SNR>32_get_hunks_gitgutter returning ''
function airline#extensions#hunks#get_hunks[13]..<SNR>32_get_hunks returning ''
function airline#extensions#hunks#get_hunks returning ''
:au CursorHold
--- Auto-Commands ---
gitgutter CursorHold
* call gitgutter#process_buffer(bufnr(''), 1)
CursorHold
* unlet! b:airline_head
airline_whitespace CursorHold
* call <sid>ws_refresh()
------------------------
Sample vimrc:
set nocompatible
if empty(glob('~/.vim/autoload/plug.vim'))
silent !curl -fLo ~/.vim/autoload/plug.vim --create-dirs
\ https://raw.githubusercontent.com/junegunn/vim-plug/master/plug.vim
autocmd VimEnter * PlugInstall --sync | q | doautocmd WinEnter
endif
autocmd VimEnter *
\ if len(filter(values(g:plugs), '!isdirectory(v:val.dir)'))
\| PlugInstall --sync | q
\| endif
call plug#begin('~/.vim/bundle/')
Plug 'vim-airline/vim-airline'
Plug 'tpope/vim-fugitive'
Plug 'airblade/vim-gitgutter'
call plug#end()
set laststatus=2
set updatetime=250
let g:airline_theme = 'dark'
Commmit a10d321809 introduced a small typo
spelling a previously set variable `trailing_fmt` as `trailing_fm`. This
causes Vim to report `trailing_fm` as an undefined variable. In this
change, the variable is properly referenced as `trailing_fmt`.
calling settabvar() while evaluating the 'tabline' setting apparently
causes flicker on Windows. Fall back to using `:let t:var` to store the
content in the current tabpage.
This is not as good as using `settabvar()` since we cannot store the
title for other tabs, but at least it should prevent the flicker and at
the same time at least cache the title for the current tabpage.
do not call airline#extensions#branch#head() but instead use the cached
variable b:airline_head.
Note: it looks like GitGutterGetHunkSummary() could need some cacheing
The comparison in airline#highlighter#exec() was there to prevent to
call out to too many :hi calls by making sure that the newly to be
defined highlighting group will be actually different from the current
existing one.
However, that did not work, as the returned old highlight
group did never match the newly to be created one, since it
intentionally left the cterm attributes out for the gui and the gui
attributes for the terminal.
Therefore, fix the comparasion and make it compare the actual values
that we have.
This should make vim-airline a bit faster (hopefully!)
Currently, vim-airline will check untracked status for files e.g. living
in .git. So when editing .git/config it will show as being untracked.
While technically, this is correct I prefer not to see this for those
files. So skip the check for those files.
previously we only checked, that the group exists, however
if loading a new color scheme, this might lead to the group becoming
cleared. That means it still exists, but the highlighting group would
not show anything. Therefore, also check that the group is not cleared.
closes#1483
Currently the syntastic results are simply dumped into the error
section, however syntastic does internally distinguish between error and
warning sections.
Therefore change the syntastic extension to dump errors into the error
section and warnings into the warning section.
closes#1480
If a file is edited inside a git repository, which lies within a git
repository, the branch extensions shows 'gitmaster | hgdefault'
To make it more obvious, that we are looking into both repositories
here, use 'git:master | hg:default'
closes#1482
vim-airline does use a different section (path/file) depending on
whether 'acd' is set. Later in the bufferline extesion however, it
unconditionally overwrites the 'file' section, regardless of whether
this section is actually used.
Therefore the bufferline section needs to check this option as well.
fixes#1487
This should not happen, however being a bit more error tolerant
shouldn't hurt, so let's just fall back to 'normal' for the
g:netrw_sort_direction in case it is not defined (which should be the
default anyhow).
fixes#1492
Indicates:
- whether the file is considered to be main or local
- whether the viewer is opened
- whether the compilation is running
- whether the compilation is continuous
Added:
* `vimtex` existence check
* variables documentation
TODO: readme and a screenshot
Update readme.md
Update doc
Update screenshot url
The denite extension functions return the content of some buffer-local
variables. Those variables are not defined, the first time the they are
accessed and therefore, the statusline is not updated later when
g:airline_skip_empty_sections is set.
So disable this variable in this window, by setting the
w:airline_skip_empty_section=0 variable in the denite window.
closes#1454
Basically what the title says. First check if the user has Powerline,
fall back to Unicode symbols if he doesn't and fall back to ASCII
symbols if he doesn't have that either.
Vim-airline is not a looker without a Powerline font. This fixes that!
* Ugly separator symbols are hidden
* New branch (ᚠ), line (㏑), maxline (☰) and whitespace (☲) symbols
* Replace old whitespace (✹) symbol in Powerline with the new (☲) more logical one
previously, it could have been skipped, if the old highlighting
attribute was the same as the current one. However, if the group does
not exist, it should still be defined
closes#1404
If a color value of ['', '', 'NONE', 'NONE', ''] is given as value to
the highlighting group, the resulting group definition would look like
this:
hi Normal ctermfg=NONE ctermbg=NONE
which would result in the highlighting group being cleared (or even no
set at all), therefore check that at least one other value exists and if
not fall back to the highlighting definition of the Normal group.
Line numbers are now displayed before the error, instead of after, preventing truncation (and thus making the whitespace/indent section essentially useless in smaller terminals)
