* caddyfile: Support for raw token values, improve `map`, `expression`
* Applied code review comments
* Rename RawVal to ValRaw
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
* reverseproxy: New `copy_response` handler for `handle_response` routes
Followup to #4298 and #4388.
This adds a new `copy_response` handler which may only be used in `reverse_proxy`'s `handle_response` routes, which can be used to actually copy the proxy response downstream.
Previously, if `handle_response` was used (with routes, not the status code mode), it was impossible to use the upstream's response body at all, because we would always close the body, expecting the routes to write a new body from scratch.
To implement this, I had to refactor `h.reverseProxy()` to move all the code that came after the `HandleResponse` loop into a new function. This new function `h.finalizeResponse()` takes care of preparing the response by removing extra headers, dealing with trailers, then copying the headers and body downstream.
Since basically what we want `copy_response` to do is invoke `h.finalizeResponse()` at a configurable point in time, we need to pass down the proxy handler, the response, and some other state via a new `req.WithContext(ctx)`. Wrapping a new context is pretty much the only way we have to jump a few layers in the HTTP middleware chain and let a handler pick up this information. Feels a bit dirty, but it works.
Also fixed a bug with the `http.reverse_proxy.upstream.duration` placeholder, it always had the same duration as `http.reverse_proxy.upstream.latency`, but the former was meant to be the time taken for the roundtrip _plus_ copying/writing the response.
* Delete the "Content-Length" header if we aren't copying
Fixes a bug where the Content-Length will mismatch the actual bytes written if we skipped copying the response, so we get a message like this when using curl:
```
curl: (18) transfer closed with 18 bytes remaining to read
```
To replicate:
```
{
admin off
debug
}
:8881 {
reverse_proxy 127.0.0.1:8882 {
@200 status 200
handle_response @200 {
header Foo bar
}
}
}
:8882 {
header Content-Type application/json
respond `{"hello": "world"}` 200
}
```
* Implement `copy_response_headers`, with include/exclude list support
* Apply suggestions from code review
Co-authored-by: Matt Holt <mholt@users.noreply.github.com>
* opentelemetry: create a new module
* fix imports
* fix test
* Update modules/caddyhttp/opentelemetry/README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update modules/caddyhttp/opentelemetry/README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update modules/caddyhttp/opentelemetry/README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update modules/caddyhttp/opentelemetry/tracer.go
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* rename error ErrUnsupportedTracesProtocol
* replace spaces with tabs in the test data
* Update modules/caddyhttp/opentelemetry/README.md
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* Update modules/caddyhttp/opentelemetry/README.md
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* replace spaces with tabs in the README.md
* use default values for a propagation and exporter protocol
* set http attributes with helper
* simplify code
* Cleanup modules/caddyhttp/opentelemetry/README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update link in README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update documentation in README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update link to naming spec in README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Rename module from opentelemetry to tracing
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Rename span_name to span
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Rename span_name to span
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Simplify otel resource creation
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* handle extra attributes
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* update go.opentelemetry.io/otel/semconv to 1.7.0
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* update go.opentelemetry.io/otel version
* remove environment variable handling
* always use tracecontext,baggage as propagators
* extract tracer name into variable
* rename OpenTelemetry to Tracing
* simplify resource creation
* update go.mod
* rename package from opentelemetry to tracing
* cleanup tests
* update Caddyfile example in README.md
* update README.md
* fix test
* fix module name in README.md
* fix module name in README.md
* change names in README.md and tests
* order imports
* remove redundant tests
* Update documentation README.md
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Fix grammar
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update comments
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* Update comments
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
* update go.sum
* update go.sum
* Add otelhttp instrumentation, update OpenTelemetry libraries.
* Use otelhttp instrumentation for instrumenting HTTP requests.
This change uses context.WithValue to inject the next handler into the
request context via a "nextCall" carrier struct, and pass it on to a
standard Go HTTP handler returned by otelhttp.NewHandler. The
underlying handler will extract the next handler from the context,
call it and pass the returned error to the carrier struct.
* use zap.Error() for the error log
* remove README.md
* update dependencies
* clean up the code
* change comment
* move serveHTTP method from separate file
* add syntax to the UnmarshalCaddyfile comment
* go import the file
* admin: Write proper status on invalid requests (#4569) (fix#4561)
* update dependencies
Co-authored-by: Dave Henderson <dhenderson@gmail.com>
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
Co-authored-by: Vibhav Pant <vibhavp@gmail.com>
Co-authored-by: Alok Naushad <alokme123@gmail.com>
Co-authored-by: Cedric Ziel <cedric@cedric-ziel.com>
* Add a override_domain option to allow DNS chanllenge delegation
CNAME can be used to delegate answering the chanllenge to another DNS
zone. One usage is to reduce the exposure of the DNS credential [1].
Based on the discussion in caddy/certmagic#160, we are adding an option
to allow the user explicitly specify the domain to delegate, instead of
following the CNAME chain.
This needs caddy/certmagic#160.
* rename override_domain to dns_challenge_override_domain
* Update CertMagic; fix spelling
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
* reverseproxy: Begin refactor to enable dynamic upstreams
Streamed here: https://www.youtube.com/watch?v=hj7yzXb11jU
* Implement SRV and A/AAA upstream sources
Also get upstreams at every retry loop iteration instead of just once
before the loop. See #4442.
* Minor tweaks from review
* Limit size of upstreams caches
* Add doc notes deprecating LookupSRV
* Provision dynamic upstreams
Still WIP, preparing to preserve health checker functionality
* Rejigger health checks
Move active health check results into handler-specific Upstreams.
Improve documentation regarding health checks and upstreams.
* Deprecation notice
* Add Caddyfile support, use `caddy.Duration`
* Interface guards
* Implement custom resolvers, add resolvers to http transport Caddyfile
* SRV: fix Caddyfile `name` inline arg, remove proto condition
* Use pointer receiver
* Add debug logs
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* reverseproxy: Make shallow-ish clone of the request
* Refactor request cloning into separate function
Co-authored-by: Matthew Holt <mholt@users.noreply.github.com>
If .ts.net domains are explicitly added to config,
don't try to manage a cert for them (it will fail, and our
implicit Tailscale module will
get those certs at run-time).
Remove /pki/certificates/<ca> endpoint and split into two endpoints:
- GET /pki/ca/<id> to get CA info and certs in JSON format
- GET /pki/ca/<id>/certificates to get cert in PEM chain
* admin: Implement /pki/certificates/<id> API
* pki: Lower "skip_install_trust" log level to INFO
See https://github.com/caddyserver/caddy/issues/4058#issuecomment-976132935
It's not necessary to warn about this, because this was an option explicitly configured by the user. Still useful to log, but we don't need to be so loud about it.
* cmd: Export functions needed for PKI app, return API response to caller
* pki: Rewrite `caddy trust` command to use new admin endpoint instead
* pki: Rewrite `caddy untrust` command to support using admin endpoint
* Refactor cmd and pki packages for determining admin API endpoint
* Update matchers.go
* Update matchers.go
* implementation of zone_id handling
* last changes in zone handling
* give return true values instead of bool
* Apply suggestions from code review
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* changes as suggested
* Apply suggestions from code review
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* Update matchers.go
* shortened the Match function
* changed mazcher handling
* Update matchers.go
* delete space
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
Huge thank-you to Tailscale (https://tailscale.com) for making this change possible!
This is a great feature for Caddy and Tailscale is a great fit for a standard implementation.
* caddytls: GetCertificate modules; Tailscale
* Caddyfile support for get_certificate
Also fix AP provisioning in case of empty subject list (persist loaded
module on struct, much like Issuers, to surive reprovisioning).
And implement start of HTTP cert getter, still WIP.
* Update modules/caddytls/automation.go
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
* Use tsclient package, check status for name
* Implement HTTP cert getter
And use reuse CertMagic's PEM functions for private keys.
* Remove cache option from Tailscale getter
Tailscale does its own caching and we don't need the added complexity...
for now, at least.
* Several updates
- Option to disable cert automation in auto HTTPS
- Support multiple cert managers
- Remove cache feature from cert manager modules
- Minor improvements to auto HTTPS logging
* Run go mod tidy
* Try to get certificates from Tailscale implicitly
Only for domains ending in .ts.net.
I think this is really cool!
Co-authored-by: Francis Lavoie <lavofr@gmail.com>
