For example /t/ URLs were being replaced if they contained secure-media-uploads so if you made a topic called "Secure Media Uploads Are Cool" the View Topic link in the user notifications would be stripped out.
Refactored code so this secure URL detection happens in one place.
Previously if somehow a user created a blank markdown document using tag
tricks (eg `<p></p><p></p><p></p><p></p><p></p><p></p>`) and so on, we would
completely strip the document down to blank on post process due to onebox
hack.
Needs a followup cause I am still unclear about the reason for empty p stripping
and it can cause some unclear cases when we re-cook posts.
Basically, say you had already downloaded a certain image from a certain URL
using pull_hotlinked_images and the onebox. The upload would be stored
by its sha as an upload record. Whenever you linked to the same URL again
in a post (e.g. in our case an og:image on review.discourse) we would
would reuse the original upload record because of the sha1.
However when you turned on secure media this could cause problems as
the first post that uses that upload after secure media is enabled
will set the access control post for the upload to the new post.
Then if the post is deleted every single onebox/link to that same image
URL will fail forever with 403 as the secure-media-uploads URL fails
if the access control post has been deleted.
To fix this when cooking posts and pulling hotlinked images, we only
allow using an original upload by URL if its access control post
matches the current post, and if the original_sha1 is filled in,
meaning it was uploaded AFTER secure media was enabled. otherwise
we just redownload the media again to be safe, as the URL will always
be new then.
The new search modifier `in:all` can be used to include both public and personal messages in the same search.
Co-authored-by: adam j hartz <hz@mit.edu>
* DEV: Add a fake Mutex that for concurrency testing with Fibers
* DEV: Support running in sleep order in concurrency tests
* FIX: A separate FallbackHandler should be used for each redis pair
This commit refactors the FallbackHandler and Connector:
* There were two different ways to determine whether the redis master
was up. There is now one way and it is the responsibility of the
new RedisStatus class.
* A background thread would be created whenever `verify_master` was
called unless the thread already existed. The thread would
periodically check the status of the redis master. However, checking
that a thread is `alive?` is an ineffective way of determining
whether it will continue to check the redis master in the future
since the thread may be in the process of winding down.
Now, this thread is created when the recorded master status goes from
up to down. Since this thread runs the only part of the code that is
able to bring the recorded status up again, we ensure that only one
thread is probing the redis master at a time and that there is always
a thread probing redis master when it is recorded as being down.
* Each time the status of the redis master was checked periodically, it
would spawn a new thread and immediately join on it. I assume this
happened to isolate the check from the current execution, but since
the join rethrows exceptions in the parent thread, this was not
effective.
* The logic for falling back was spread over the FallbackHandler and
the Connector. The connector is now a dumb object that delegates
responsibility for determining the status of redis to the
FallbackHandler.
* Previously, failing to connect to a master redis instance when it was
not recorded as down would raise an exception. Now, this exception is
passed to `Discourse.warn_exception` and the connection is made to
the slave.
This commit introduces the FallbackHandlers singleton:
* It is responsible for holding the set of FallbackHandlers.
* It adds callbacks to the fallback handlers for when a redis master
comes up or goes down. Main redis and message bus redis may exist on
different or the same redis hosts and so these callbacks may all
exist on the same FallbackHandler or on separate ones.
These objects are tested using fake concurrency provided by the
Concurrency module:
* An `around(:each)` hook is used to cause each test to run inside a
Scenario so that the test body, mocking cleanup and `after(:each)`
callbacks are run in a different Fiber.
* Therefore, holting the execution of the Execution abruptly (so that
the fibers aren't run to completion), prevents the mocking cleaning
and `after(:each)` callbacks from running. I have tried to prevent
this by recovering from all exceptions during an Execution.
* FIX: Create frozen copies of passed in config where possible
* FIX: extract start_reset method and remove method used by tests
Co-authored-by: Daniel Waterworth <me@danielwaterworth.com>
Add TopicUploadSecurityManager to handle post moves. When a post moves around or a topic changes between categories and public/private message status the uploads connected to posts in the topic need to have their secure status updated, depending on the security context the topic now lives in.
When we were pulling hotlinked images for oneboxes in the CookedPostProcessor, we were using the direct S3 URL, which returned a 403 error and thus did not set widths and heights of the images. We now cook the URL first based on whether the upload is secure before handing off to FastImage.
Let's say post #2 quotes post number #1. If a user decides to quote the
quote in post #2, it should keep the information of post #1
("user_1, post: 1, topic: X"), instead of replacing with current post
info ("user_2, post: 2, topic: X").
* enqueue spam/dmarc failing emails instead of hiding
* add translations for dmarc/spam enqueued reasons
* unescape quote
* if email_in_authserv_id is blank return gray for all emails
### General Changes and Duplication
* We now consider a post `with_secure_media?` if it is in a read-restricted category.
* When uploading we now set an upload's secure status straight away.
* When uploading if `SiteSetting.secure_media` is enabled, we do not check to see if the upload already exists using the `sha1` digest of the upload. The `sha1` column of the upload is filled with a `SecureRandom.hex(20)` value which is the same length as `Upload::SHA1_LENGTH`. The `original_sha1` column is filled with the _real_ sha1 digest of the file.
* Whether an upload `should_be_secure?` is now determined by whether the `access_control_post` is `with_secure_media?` (if there is no access control post then we leave the secure status as is).
* When serializing the upload, we now cook the URL if the upload is secure. This is so it shows up correctly in the composer preview, because we set secure status on upload.
### Viewing Secure Media
* The secure-media-upload URL will take the post that the upload is attached to into account via `Guardian.can_see?` for access permissions
* If there is no `access_control_post` then we just deliver the media. This should be a rare occurrance and shouldn't cause issues as the `access_control_post` is set when `link_post_uploads` is called via `CookedPostProcessor`
### Removed
We no longer do any of these because we do not reuse uploads by sha1 if secure media is enabled.
* We no longer have a way to prevent cross-posting of a secure upload from a private context to a public context.
* We no longer have to set `secure: false` for uploads when uploading for a theme component.
This ensures that the user object is created fresh for each example.
This is required for this particular spec as we can not risk having a stale
object, which can lead to a flaky spec.
People rarely want to have their avatars show up as the preview image on social media platforms. Instead, we should fall back to the site opengraph image.
It used to check how many quotes were inside a post, without taking
considering that some quotes can contain other quotes. This commit
selects only top level quotes.
I had to use XPath because I could not find an equivalent CSS
selector.
Meta thread: https://meta.discourse.org/t/sending-a-pm-with-the-following-title-causes-an-error/135654/3
We had an issue where if someone sent a PM with crazy
characters that are stripped and we end up with only
a number, the topic redirect errored because the slug was
a number. so instead we return the default as well if
the slug is a number after prettification
The ROTP gem is only used in a very small amount of places in the app, we don't need to globally require it.
Also set the Addressable gem to not have a specific version range, as it has not been a problem yet.
Some slight refactoring of UserSecondFactor here too to use SecondFactorManager to avoid code repetition
This is a slight workaround which helps somewhat now but is pending a larger
fix.
When this spec ran in parallel mode uploads could start cross talking and
an upload you expect to be there may vanish.
This works around the issue by making the upload unique every time it is
created
It also folds up an expensive test into the main one.
* DEV: Add API to alter uploads Markdown
* DEV: Extract data attributes from image / download Markdown
For example '[test|attachment|hello=world]' will generate an 'a' element
with a data attribute: 'data-hello=world'.
This commit also makes MarkdownIt to transform '|attachment' into
'class="attachment"'. This transformation used to be a part of the
process which resolves short URLs (i.e. upload://).
* DEV: Export imageNameFromFileName
Non UTF-8 user_agent requests were bypassing logging due to PG always
wanting UTF-8 strings.
This adds some conversion to ensure we are always dealing with UTF-8
This fixes the following issues:
* The link element on the lightbox which pops open the lightbox was linking to the S3 URL with a private ACL instead of the secure media URL for the image
* Change to use `@post.with_secure_media?` in `CookedPostProcessor` for URL cooking, as in some cases, like when a post is edited and an upload is added, `upload.secure?` can be false which resulted in `srcset` URLs not being cooked correctly to secure media upload urls.
This feature adds the ability to define synonyms for tags, and the ability to merge one tag into another while keeping it as a synonym. For example, tags named "js" and "java-script" can be synonyms of "javascript". When searching and creating topics using synonyms, they will be mapped to the base tag.
Along with this change is a new UI found on each tag's page (for example, `/tags/javascript`) where more information about the tag can be shown. It will list the synonyms, which categories it's restricted to (if any), and which tag groups it belongs to (if tag group names are public on the `/tags` page by enabling the "tags listed by group" setting). Staff users will be able to manage tags in this UI, merge tags, and add/remove synonyms.
This bug was causing some unusual behavior when the last post is filtered (e.g. from an ignored user). In some situations this would cause suggested topics to be omitted from the payload.
The next_page specs have been updated to remove most of the stubs
* FEATURE: Ability to add components to all themes
This is the first and functional step from that topic https://dev.discourse.org/t/adding-a-theme-component-is-too-much-work/15398/16
The idea here is that when a new component is added, the user can easily assign it to all themes (parents).
To achieve that, I needed to change a site-setting component to accept `setDefaultValues` action and `setDefaultValuesLabel` translated label.
Also, I needed to add `allowAny` option to disable that for theme selector.
I also refactored backend to accept both parent and child ids with one method to avoid duplication (Renamed `add_child_theme!` to more general `add_relative_theme!`)
* FIX: Improvement after code review
* FIX: Improvement after code review2
* FIX: use mapBy and filterBy directly
We already cache failed onebox URL requests client-side, we now want to cache this on the server-side for extra protection. failed onebox previews will be cached for 1 hour, and any more requests for that URL will fail with a 404 status. Forcing a rebake via the Rebake HTML action will delete the failed URL cache (like how the oneboxer preview cache is deleted).
If a user has more than 60 active sessions, the oldest sessions will be terminated automatically. This protects performance when logging in and when loading the list of recently used devices.
This is a bottom up rewrite of Discourse cache to support faster performance
and a limited surface area.
ActiveSupport::Cache::Store accepts many options we do not use, this partial
implementation only picks the bits out that we do use and want to support.
Additionally params are named which avoids typos such as "expires_at" vs "expires_in"
This also moves a few spots in Discourse to use Discourse.cache over setex
Performance of setex and Discourse.cache.write is similar.
Discourse.cache is a more consistent method to use and offers clean fallback
if you are skipping redis
This is part of a larger change that both optimizes Discoruse.cache and omits
use of setex on $redis in favor of consistently using discourse cache
Bench does reveal that use of Rails.cache and Discourse.cache is 1.25x slower
than redis.setex / get so a re-implementation will follow prior to porting
PG 12 changes internals in a subtle way, time jitter is noticed in a few new
spots (which is normal) and default ordering is a bit different which is meant
to be random anyway.
There was an issue on dev where when uploading secure media, the href of the media was correctly being replaced in the CookedPostProcessor, but the srcset urls were not being replaced correctly. This is because UrlHelper.cook_url was returning the asset host URL for the media for secure media instead of returning early with the proxied secure proxy url.
In non-login-required sites, we prevent secure uploads already used in PMs from being used in public topics.
In login_required sites, secure uploads should be reusable in any topic, PM or not.
Previously our custom exception handler was unable to handle situations
where an invalid mime type was sent, resulting in a warning log
This ensures we pretend a request is HTML for the purpose of rendering
the error page if an invalid mime type from a scanner is shipped to the app
* Fix an issue where if an edit was made to a post with a reason provided, and then another edit was made with no reason, the original edit reason got wiped out
* We now always make a post revision (even with ninja edits) if an edit reason has been provided and it is different from the current edit reason
Co-Authored-By: Sam <sam.saffron@gmail.com>
This PR introduces a new secure media setting. When enabled, it prevent unathorized access to media uploads (files of type image, video and audio). When the `login_required` setting is enabled, then all media uploads will be protected from unauthorized (anonymous) access. When `login_required`is disabled, only media in private messages will be protected from unauthorized access.
A few notes:
- the `prevent_anons_from_downloading_files` setting no longer applies to audio and video uploads
- the `secure_media` setting can only be enabled if S3 uploads are already enabled and configured
- upload records have a new column, `secure`, which is a boolean `true/false` of the upload's secure status
- when creating a public post with an upload that has already been uploaded and is marked as secure, the post creator will raise an error
- when enabling or disabling the setting on a site with existing uploads, the rake task `uploads:ensure_correct_acl` should be used to update all uploads' secure status and their ACL on S3
Previously people were not consistent about mocking which left internals in
a fragile state when running subfolder specs.
This introduces a simple helper `set_subfolder` which you can use to set
the subfolder for the spec. It takes care of proper configuration of subfolder
and teardown.
```
# usage
set_subfolder "/my_amazing_subfolder"
```
You should no longer stub base_uri or global_settings
This version hash is used for the filename, and so browsers/CDNs cache based on it. Previously the version hash was based only on the list of requested icons. This can cause issues in a couple of situations, most commonly when developing themes with custom icons:
- A requested icon does not exist, and then later is added to the theme. The bundle output changes, but the hash did not
- The SVG content of an icon changes, but the name of the icon does not. The bundle output changes, but the hash did not
* When viewing a tag, the search widget will now show a checkbox to scope the search by tag, which will limit search results to that tag on desktop and mobile
This method had grown into a monster. Its query had bugs
that I couldn't fix, and new features would be hard to add.
Also I don't understand how it all works anymore...
Replace it with common table expressions that can be queried
to generate the results we need, instead of subtracting
results using lots of "NOT IN" clauses.
Fixed are bugs with tag schemas that use combinations of
tag groups, parent tags, and one-tag-per-topic restrictions.
For example: https://meta.discourse.org/t/130991/6
Previously we were always hard-coding expiry, this allows the secure session
to correctly handle custom expiry times
Also adds a ttl method for looking up time to live
Instead of enabling `suppress_from_latest` setting on many categories now we can enable `mute_all_categories_by_default` site setting. Then users should opt-in to categories for them to appear in the latest and categories pages.
This makes it easy to run multiple commands with the same keyword arguments. The main use is for using `chdir` across multiple commands. The `Dir.chdir` method is not concurrency safe because it switches the working directory of the entire process.
- Allow revoking keys without deleting them
- Auto-revoke keys after a period of no use (default 6 months)
- Allow multiple keys per user
- Allow attaching a description to each key, for easier auditing
- Log changes to keys in the staff action log
- Move all key management to one place, and improve the UI
This is a follow-up to the new feature that allows a category to
require a certain number of tags from a tag group. The tag input will
shows results from the required group if none have been chosen yet.
Once a require tag is selected, the tag input will include other
results as usual. Staff users can ignore this restriction, so the input
behaviour is unchanged for them.
* use image alt as a fallback when there's no title
* update spec
we used to check that the overlay information is added when the image has a titie. This adds 2 more scenarios. One where an image has both a title and an alt, in which case the title should be used and alt ignored.
The other is when there's only an alt, it should then be used to generate the overlay
Meta thread: https://meta.discourse.org/t/cant-dismiss-unread-if-last-post-is-an-assign-or-whisper/131823/7
* when sending a whisper, the highest_staff_post_number is set
in the next_post_number method for a Topic, but the
highest_post_number is left alone. this leaves a situation
where highest_staff_post_number is > highest_post_number
* when TopicsBulkAction#dismiss_posts was run, it was only setting the topic_user
highest_seen_post_number using the highest_post_number from the topic, so if
the user was staff and the last post in a topic was a whisper
their highest seen number was not set, and the topic stayed unread
Found through testing that the bug wasn't to do with Assign/Unassign as they do not affect the post numbers, only whispering does.
In a category's settings, the Tags tab has two new fields to
specify the number of tags that must be added to a topic
from a tag group. When creating a new topic, an error will be
shown to the user if the requirement isn't met.
This was not causing any known issue, because the system user ID is always the same across all sites. However, we should cache this on a per-site basis to be safe.
This ensures we only update last_posted_at which is user facing for non messages
and non whispers.
We still update this date for secure categories, we do not revert it for
deleted posts.
Adds the settings:
raw_email_max_length, raw_rejected_email_max_length, delete_rejected_email_after_days.
These settings control retention of the "raw" emails logs.
raw_email_max_length ensures that if we get incoming email that is huge we will truncate it removing uploads from the raw log.
raw_rejected_email_max_length introduces an even more aggressive truncation for rejected incoming mail.
delete_rejected_email_after_days controls how many days we will keep rejected emails for (default 90)
* FEATURE: Site setting/ui to allow users to set their primary group
* prettier and remove logic from account template
* added 1 to 43 to make web_hook_user_serializer_spec pass
While editing the first post it does't bumped the topic when the new post revision created. Because we wrongly assumed that the hidden tags are changed even when no tags are updated.
Doing .pluck(:column).first is a very common pattern in Discourse and in
most cases, a limit cause isn't being added. Instead of adding a limit
clause to all these callsites, this commit adds two new methods to
ActiveRecord::Relation:
pluck_first, equivalent to limit(1).pluck(*columns).first
and pluck_first! which, like other finder methods, raises an exception
when no record is found
Trying to truncate encoded slugs will mean that we have to keep the URL
valid, which can be tricky as you have to be aware of multibyte
characters.
Since we already have upper bounds for the title, the slug won't grow
for more than title*6 in the worst case. The slug column in the topic
table can store that just fine.
Added a test to ensure that a generated slug is a valid URL too, so we
don't introduce regressions in the future.
Previously the 'local_cdn_url' method didn't returned the correct cdn url. So we written few incorrect spec tests too.\n\nf92a6f7ac5228342177bf089d269e2f69a69e2f5
When an admin changes the site setting slug_generation_method to
encoded, we weren't really encoding the slug, but just allowing non-ascii
characters in the slug (unicode).
That brings problems when a user posts a link to topic without the slug, as
our topic controller tries to redirect the user to the correct URL that contains
the slug with unicode characters. Having unicode in the Location header in a
response is a RFC violation and some browsers end up in a redirection loop.
Bug report: https://meta.discourse.org/t/-/125371?u=falco
This commit also checks if a site uses encoded slugs and clear all saved slugs
in the db so they can be regenerated using an onceoff job.
Using popups is becoming increasingly rare. Full page redirects are already used on mobile, and for some providers. This commit removes all logic related to popup authentication, leaving only the full page redirect method.
For more info, see https://meta.discourse.org/t/do-we-need-popups-for-login/127988
* FEATURE: Adds an extra protection layer when decompressing files.
* Rename exporter/importer to zip importer. Update old locale
* Added a new composite class to decompress a file with multiple strategies
* Set max file size inside a site setting
* Ensure that file is deleted after compression
* Sanitize path and files before compressing/decompressing
Zeitwerk simplifies working with dependencies in dev and makes it easier reloading class chains.
We no longer need to use Rails "require_dependency" anywhere and instead can just use standard
Ruby patterns to require files.
This is a far reaching change and we expect some followups here.
This means that TL0 users can message groups with "Who can message this
group?" set to "Everyone".
It also means that members of a group with "Who can message this
group?" set to "members, moderators and admins" can also message the
group, even when their trust level is below min_trust_to_send_messages.
* Adjustments to pass specs on Rails 6.0.0
* Use classic autoloader instead of Zeitwerk
* Update Rails 6.0.0 deprecated methods
* Rails 6.0.0 not allowing column with integer name
* Drop freedom_patches/rails6.rb
* Default value for trigger_transactional_callbacks? is true
* Bump rspec-rails version to 4.0.0.beta2
* FEATURE: Add tl2 threshold for editing new posts
* Adds a new setting and for tl2 editing posts (30 days same as old value)
* Sets the tl0/tl1 editing period as 1 day
* FIX: Spec uses wrong setting
* Fix site setting on guardian spec
* FIX: post editing period specs
* Avoid shared examples
* Use update_columns to avoid callbacks on user during tests
This commit introduces 2 features:
1. DISCOURSE_COMPRESS_ANON_CACHE (true|false, default false): this allows
you to optionally compress the anon cache body entries in Redis, can be
useful for high load sites with Redis that lives on a separate server to
to webs
2. DISCOURSE_ANON_CACHE_STORE_THRESHOLD (default 2), only pop entries into
redis if we observe them more than N times. This avoids situations where
a crawler can walk a big pile of topics and store them all in Redis never
to be used. Our default anon cache time for topics is only 60 seconds. Anon
cache is in place to avoid the "slashdot" effect where a single topic is
hit by 100s of people in one minute.
Start tracking the date an api key was last used. This has already been
the case for user_api_keys.
This information can provide us with the ability to automatically expire
unused api keys after N days.
This allows custom plugins such as prometheus exporter to log how many
requests are stored in the anon cache vs used by the anon cache.
This metric allows us to fine tune cache behaviors
* Revert "Revert "FEATURE: Publish read state on group messages. (#7989) [Undo revert] (#8024)""
This reverts commit 36425eb9f0.
* Fix: Show who read only if the attribute is enabled
* PERF: Precalculate the last post readed by a group member
* Use book-reader icon instear of far-eye
* FIX: update topic groups correctly
* DEV: Tidy up read indicator update on write
This is a very long standing bug we had, if a plugin attempted to amend a
serializer core was not "correcting" the situation for all descendant classes
this often only showed up in production cause production eager loads serializers
prior to plugins amending them.
This is a critical fix for various plugins
* Reenable: "FEATURE: Publish read state on group messages. (#7989)"
This reverts commit 67f5cc1ce8.
* FIX: Read indicator only appears when the group setting is enabled
* Enable or disable read state based on group attribute
* When read state needs to be published, the minimum unread count is calculated in the topic query. This way, we can know if someone reads the last post
* The option can be enabled/disabled from the UI
* The read indicator will live-updated using message bus
* Show read indicator on every post
* The read indicator now shows read count and can be expanded to see user avatars
* Read count gets updated everytime someone reads a message
* Simplify topic-list read indicator logic
* Unsubscribe from message bus on willDestroyElement, removed unnecesarry values from post-menu, and added a comment to explain where does minimum_unread_count comes from
There are 5 visibility levels (similar to group visibility)
public (default)
logged-in users
members only
staff
owners
Admins & group owners always have visibility to group members.
When a user liked, unliked and liked again the same post, the poster
would receive a notification such as "X and X liked ...". This happened
because PostActionNotifier.post_action_created was called twice.
All posts created by the user are counted unless they are deleted,
belong to a PM sent between a non-human user and the user or belong
to a PM created by the user which doesn't have any other recipients.
It also makes the guardian prevent self-deletes when SSO is enabled.
- Client-side censoring fixed for non-chrome browsers. (Regular expression rewritten to avoid lookback)
- Regex generation is now done on the server, to reduce repeated logic, and make it easier to extend in plugins
- Censor tests are moved to ruby, to ensure everything works end-to-end
- If "watched words regular expressions" is enabled, warn the admin when the generated regex is invalid
This feature is off by default and can can be configured with the `email_total_attachment_size_limit_kb` site setting.
Co-authored-by: Maja Komel <maja.komel@gmail.com>
* FEATURE: Add search operator to see all direct messages from a user
* Only show message if related messages >= 5
* Make "all messages" the hyperlink
* Review
If a post arrives via email but must be reviewed, we now show an
icon that can be clicked to view the raw contents of the email.
This is useful if Discourse's email parser is acting odd and the user
reviewing the post wants to know what the original contents were before
approving/rejecting the post.
* Revert "Revert "FEATURE: admin/user exports are compressed using the zip format (#7784)""
This reverts commit f89bd55576.
* Replace .tar.zip with .zip
* FEATURE: admin/user exports are compressed using the zip format
* Update translations. Theme exporter now exports .zip file. Theme importer supports .zip and .gz files
* Fix controller test, updated locale and skip saving the csv export to disk
Context: https://meta.discourse.org/t/121589
This new setting option lets group owners message/mention large groups
without granting that privilege to all members.
Groups can now be marked as visible to "logged on users". All automatic groups (except `everyone`) are now visible to "logged on users", previously they were marked as public but suppressed in the group page for non-staff.
If a database exception is raised ActiveRecord will always rollback
even if caught.
Instead we build the query in manual SQL and DO NOTHING when there's a
conflict. If we detect nothing was done, perform an update.
The behaviour of #TERM in search has been amended
1. We try category or subcategory slugs
2. We try tags
3. We try tag-groups
The term `hello #my-group` will search for all posts tagged with any of
the tags in the tag group `My Group`
Future work may be introducing a slug cache here or caching it in the table
but the assumption is that the number of tag groups will not be huge
Adds a second factor landing page that centralizes a user's second factor configuration.
This contains both TOTP and Backup, and also allows multiple TOTP tokens to be registered and organized by a name. Access to this page is authenticated via password, and cached for 30 minutes via a secure session.
This can cause unbound CPU usage in some cases, and excessive logging in other cases. This commit moves redis readonly information into the local process, but maintains the DistributedCache for postgres readonly state.
* Support private uploads in S3
* Use localStore for local avatars
* Add job to update private upload ACL on S3
* Test multisite paths
* update ACL for private uploads in migrate_to_s3 task
This adds support for DISCOURSE_ENABLE_PERFORMANCE_HTTP_HEADERS
when set to `true` this will turn on performance related headers
```text
X-Redis-Calls: 10 # number of redis calls
X-Redis-Time: 1.02 # redis time in seconds
X-Sql-Commands: 102 # number of SQL commands
X-Sql-Time: 1.02 # duration in SQL in seconds
X-Queue-Time: 1.01 # time the request sat in queue (depends on NGINX)
```
To get queue time NGINX must provide: HTTP_X_REQUEST_START
We do not recommend you enable this without thinking, it exposes information
about what your page is doing, usually you would only enable this if you
intend to strip off the headers further down the stream in a proxy
Previously as soon as any override was defined we would regress to the slow
path for locale lookups. Additionally if `raise: true` was specified which
rails likes to add in views we would bypass the cache
The new design manages to use the fast path for many more cases
SSO uses a special param to username suggester that whitelists a username
due to previous work we amended our lookup logic and started ignoring this
whitelist.
The fix ensures we always respect it, and also improves on the original
implementation that forgot to normalize the username.
This also corrects FileHelper.download so it supports "follow_redirect"
correctly (it used to always follow 1 redirect) and adds a `validate_url`
param that will bypass all uri validation if set to false (default is true)
Net::HTTP always returns ASCII-8BIT encoding. File.read auto-detects the encoding. This leads to an encoding inconsistency between a fresh download, and a cached download. This commit ensures all downloaded files are treated equally, by always returning the cached version from the filesystem, even during initial download.
One symptom of this problem is during theme exports: https://meta.discourse.org/t/116907
Related ruby ticket: https://bugs.ruby-lang.org/issues/2567
Previously username suggester would give up after 100 attempts at getting
a username and fallback to random string.
This amends the logic so we do all the work of figuring out a good username
in SQL and avoids a large amount of queries in cases where a lot of usernames
were used up.
This corrects an issue on sites with large numbers of anon users
Use the cooked version of the post and the quote to compare their content in
order to take into account the "typographer" option of the markdown pipeline.
We were blocking user registrations with same username and password,
but allowing usernames to be changed to be same as password later.
Also disallow names to be the same as password.
* English shouldn't fallback to any other locale
* Calculate fallback for default locale if it isn't English (useful for en_US)
* Reuse the fallback locale list when outputting translations to JavaScript
This reduces chances of errors where consumers of strings mutate inputs
and reduces memory usage of the app.
Test suite passes now, but there may be some stuff left, so we will run
a few sites on a branch prior to merging
The instagram onebox sometimes surrounds the image with an `<a>` tag, which was breaking the aspect ratio logic, and therefore causing posts to change height on load.
Since 5bfe051e, Discourse user agents are marked as non-crawlers (to avoid accidental blacklisting). This makes sure pageviews for these agents are tracked as crawler hits.
We found score hard to understand. It is still there behind the scenes
for sorting purposes, but it is no longer shown.
You can now filter by minimum priority (low, med, high) instead of
score.
* Introduced fab!, a helper that creates database state for a group
It's almost identical to let_it_be, except:
1. It creates a new object for each test by default,
2. You can disable it using PREFABRICATION=0
This removes all uses of both `send` and `public_send` from consumers of
SiteSetting and instead introduces a `get` helper for dynamic lookup
This leads to much cleaner and safer code long term as we are always explicit
to test that a site setting is really there before sending an arbitrary
string to the class
It also removes a couple of risky stubs from the auth provider test
This change shows a notification number besides the flag icon in the
post menu if there is reviewable content associated with the post.
Additionally, if there is pending stuff to review, the icon has a red
background.
We have also removed the list of links below a post with the flag
status. A reviewer is meant to click the number beside the flag icon to
view the flags. As a consequence of losing those links, we've removed
the ability to undo or ignore flags below a post.
Minor fixes to add Rails 6 support to Discourse, we now will boot
with RAILS_MASTER=1, all specs pass
Only one tiny deprecation left
Largest change was the way ActiveModel:Errors changed interface a
bit but there is a simple backwards compat way of working it
This change automatically resizes icons for various purposes. Admins can now upload `logo` and `logo_small`, and everything else will be auto-generated. Specific icons can still be uploaded separately if required.
## Core
- Adds an SiteIconManager module which manages automatic resizing and fallback
- Icons are looked up in the OptimizedImage table at runtime, and then cached in Redis. If the resized version is missing for some reason, then most icons will fall back to the original files. Some icons (e.g. PWA Manifest) will return `nil` (because an incorrectly sized icon is worse than a missing icon).
- `SiteSetting.site_large_icon_url` will return the optimized version, including any fallback. `SiteSetting.large_icon` continues to return the upload object. This means that (almost) no changes are required in core/plugins to support this new system.
- Icons are resized whenever a relevant site setting is changed, and during post-deploy migrations
## Wizard
- Allows `requiresRefresh` wizard steps to reload data via AJAX instead of a full page reload
- Add placeholders to the **icons** step of the wizard, which automatically update from the "Square Logo"
- Various copy updates to support the changes
- Remove the "upload-time" resizing for `large_icon`. This is no longer required.
## Site Settings UX
- Move logo/icon settings under a new "Branding" tab
- Various copy changes to support the changes
- Adds placeholder support to the `image-uploader` component
- Automatically reloads site settings after saving. This allows setting placeholders to change based on changes to other settings
- Upload site settings will be assigned a placeholder if SiteIconManager `responds_to?` an icon of the same name
## Dashboard Warnings
- Remove PWA icon and PWA title warnings. Both are now handled automatically.
## Bonus
- Updated the sketch logos to use @awesomerobot's new high-res designs
This change both speeds up specs (less strings to allocate) and helps catch
cases where methods in Discourse are mutating inputs.
Overall we will be migrating everything to use #frozen_string_literal: true
it will take a while, but this is the first and safest move in this direction
We had quite a few cases in core where inputs are being mutated as a side
effect of calling a method.
This handles all the cases where specs caught this.
Mutating inputs makes code harder to reason about. Eg:
```
frog = "frog"
jump(frog)
puts frog
"fly" # ?????
```
This commit is part of a followup commit that adds # frozen_string_literal
to all our specs.
Previous behaviour was to silently remove tags that
belonged to a group with a parent tag that was missing.
The "required parent tag" feature is meant to guide people
to use the correct tags and show scoped results in the tag
input field, and to help create topic lists of related
tags. It isn't meant to be a strict requirement in the
composer that should trigger errors or restrictions.
* DEV: Replace site_setting_saved DiscourseEvent with site_setting_changed
site_setting_saved is confusing for a few reasons:
- It is attached to the after_save of the ActiveRecord model. This is confusing because it only works 'properly' with the db_provider
- It passes the activerecord model as a parameter, which is confusing because you get access to the 'database' version of the setting, rather than the ruby setting. For example, booleans appear as 'y' or 'n' strings.
- When the event is called, the local process cache has not yet been updated. So if you call SiteSetting.setting_name inside the event handler, you will receive the old site setting value
I have deprecated that event, and added a new site_setting_changed event. It passes three parameters:
- Setting name (symbol)
- Old value (in ruby format)
- New value (in ruby format)
It is triggered after the setting has been persisted, and the local process cache has been updated.
This commit also includes a test case which describes the confusing behavior. This can be removed once site_setting_saved is removed.
If you turn it on now, default all users to approved since they were
previously. Also support approving a user that doesn't have a reviewable
record (it will be created first.)
This also includes a refactor to move class method calls to
`DiscourseEvent` into an initializer. Otherwise the load order of
classes makes a difference in the test environment and some settings
might be triggered and others not, randomly.
This new site setting determines the maximum age of unread topics in
suggested. By default if you have any unread topics older than 90 days
they will be omitted from suggested.
This change was added for 2 reasons:
1. A performance safeguard, some users tend to collect a huge amount of
read state so it becomes super expensive to find unread
2. People who collect a large amount of unread are much more interested in
recent unread topics vs ancient unread topics, this makes suggested more
relevant
Also, this is a minor speed up for tests cause 3 expensive tests became 1.
Theme developers can include any number of scss files within the /scss/ directory of a theme. These can then be imported from the main common/desktop/mobile scss.
* FIX: correctly retrieve 'login required' setting value on wizard
FEATURE: extract 'invite only' setting in a separate checkbox control
* Update invite_only checkbox locale on wizard.
Co-Authored-By: techAPJ <arpit@techapj.com>
Previously jobs would fail silently in test mode. Now they will raise the exception and cause the relevant test to fail. This identified a few broken tests, which I will fix in a followup commit
This functionality was never supported but before the new review queue
it didn't have any errors. Now the combination of settings is prevented
and existing sites with sso enabled will be migrated to remove invite
only.
The default ranking options ranks by the number of matches which is
highly problematic when posts are stuffed with a keyword. The ranking
will now be divided by the document length which is a much fairer way to
rank.
Includes support for flags, reviewable users and queued posts, with REST API
backwards compatibility.
Co-Authored-By: romanrizzi <romanalejandro@gmail.com>
Co-Authored-By: jjaffeux <j.jaffeux@gmail.com>
Previously we would bypass touching `Topic.updated_at` for whispers and post
recovery / deletions.
This meant that certain types of caching can not be done where we rely on
this information for cache accuracy.
For example if we know we have zero unread topics as of yesterday and whisper
is made I need to bump this date so the cache remains accurate
This is only half of a larger change but provides the groundwork.
Confirmed none of our serializers leak out Topic.updated_at so this is safe
spot for this info
At the moment edits still do not change this but it is not relevant for the
unread cache.
This commit also cleans up some specs to use the new `eq_time` matcher for
millisecond fidelity comparison of times
Previously `freeze_time` would fudge this which is not that clean.
- The test_email job is removed, because it was always being run synchronously (not in sidekiq)
- 34b29f62 added a bypass for critical emails, to match the spec. This removes the bypass, and removes the spec.
- This adapts the specs for 72ffabf6, so that they check for emails being sent
- This reimplements c2797921, allowing test emails to be sent even when emails are disabled
* improved emoji support
- always optimize images as part of the task
- use the unicode standard ordering/naming for sections
* UX: more height for when there are recently used
Migrates email user options to a new data structure, where `email_always`, `email_direct` and `email_private_messages` are replace by
* `email_messages_level`, with options: `always`, `only_when_away` and `never` (defaults to `always`)
* `email_level`, with options: `always`, `only_when_away` and `never` (defaults to `only_when_away`)
* First take
* Add support for sprites in themes
Automatically register any custom icons added via themes or plugins
* Fix theme sprite caching
* Simplify test
* Update lib/svg_sprite/svg_sprite.rb
Co-Authored-By: pmusaraj <pmusaraj@gmail.com>
* Fix /svg-sprite/search request
It is not a setting, and only relevant in specs. The new API is:
```
Jobs.run_later! # jobs will be thrown on the queue
Jobs.run_immediately! # jobs will run right away, avoid the queue
```
If the existing email address for a user ends in `.invalid`, we should take the email address from an authentication payload, and replace the invalid address. This typically happens when we import users from a system without email addresses.
This commit also adds some extensibility so that plugin authenticators can define `always_update_user_email?`
When using the api and you provide an http header based api key any other
auth based information (username, external_id, or user_id) passed in as
query params will not be used and vice versa.
Followup to f03b293e6a
Previously if you wanted to have jobs execute in test mode, you'd have
to do `SiteSetting.queue_jobs = false`, because the opposite of queue
is to execute.
I found this very confusing, so I created a test helper called
`run_jobs_synchronously!` which is much more clear about what it does.
- Notices are visible only by poster and trust level 2+ users.
- Notices are not generated for non-human or staged users.
- Notices are deleted when post is deleted.
Now you can also make authenticated API requests by passing the
`api_key` and `api_username` in the HTTP header instead of query params.
The new header values are: `Api-key` and `Api-Username`.
Here is an example in cURL:
``` text
curl -i -sS -X POST "http://127.0.0.1:3000/categories" \
-H "Content-Type: multipart/form-data;" \
-H "Api-Key: 7aa202bec1ff70563bc0a3d102feac0a7dd2af96b5b772a9feaf27485f9d31a2" \
-H "Api-Username: system" \
-F "name=7c1c0ed93583cba7124b745d1bd56b32" \
-F "color=49d9e9" \
-F "text_color=f0fcfd"
```
There is also support for `Api-User-Id` and `Api-User-External-Id`
instead of specifying the username along with the key.
If you reply to an email with the word "mute" a topic will be muted
If you reply to an email with the word "track" a topic will be tracked
If you reply to an email with the word "watch" a topic will be watched
These ninja command can help advanced mailing list ex-users, saves a trip
to the website
This is a common pattern we see in tests. The `id` of the upload
is used to create the URL and we assume the `id` will always be
in a certain range which depends on the database.
Uses github.com/discourse/moment-timezone-names-translations to translate timezone names.
Plugins can also provide their own timezone name translations.
Previously with had `in:title` and `in:first` search shortcuts for
searching in first post or title only. They are a bit of handful to type.
This add 2 shortcuts (t and f) for searching titles of first posts.
This commit also cleans up all advanced filters, they were not properly
regex terminated allowing for weird clauses like `in:firstinator` acting
the same as `in:first`
When the S3 store was enabled, we were only applying the S3 CDN.
So all images stored locally, like the emojis, were never put on the local CDN.
Fixed a bunch of CookedPostProcessor test by adding a call to 'optimize_urls'
in order to get final URLs.
I also removed the unnecessary PrettyText.add_s3_cdn method since this is already
handled in the CookedPostProcessor.
It was getting caught in a `DistributedMutex` deadlock (twice!), which
meant this test was taking 120s to run.
I'm not sure why queue jobs was turned off here, because when I turn it
on the test passes and takes <2s instead.
This does not serve any technical purpose. It is there to provide a signpost for any user/developer that wants to know what to do with a theme archive.
New `about.json` fields (all optional):
- `authors`: An arbitrary string describing the theme authors
- `theme_version`: An arbitrary string describing the theme version
- `minimum_discourse_version`: Theme will be auto-disabled for lower versions. Must be a valid version descriptor.
- `maximum_discourse_version`: Theme will be auto-disabled for lower versions. Must be a valid version descriptor.
A localized description for a theme can be provided in the language files under the `theme_metadata.description` key
The admin UI has been re-arranged to display this new information, and give more prominence to the remote theme options.
* FIX: allow sending PMs to staff via flag even when PMs are disabled
FIX: allow sending PMs to staff via flag even if the user trust level is insufficient
* Update lib/topic_creator.rb
Co-Authored-By: techAPJ <arpit@techapj.com>
The `posts` relation on `Topic` is not ordered. Using `Topic.posts.first`
is basically the same as asking for a random post, it will depend on DB
order. This breaks on Topic merge and split for example.
Additionally, a huge problem with that is that it forces active record down
a slow path. `Topic.posts.first` is extremely slow on giant topics, since
it has no default ordering it appears AR materializes the entire set prior
to doing `first`.
This commit also illustrates the importance of testing, initially I only
fixed the second instance of the problem in `post_validator.rb` but testing
revealed that the problem was repeated at the top of the file.
Longer term we should consider a larger change of default ordering the posts
relations so people do not fall down this trap anymore.
We use the `id` of the upload to calculate a `depth` partition in the
filename. This test would fail if your database had a higher seed
because the depth it was looking for was hard coded to 1.
The solution was to not save the records (which is faster anyway) and
specify the `id` of the upload to make the hash deterministic.
SiteSettingExtension triggers message bus which re-establishes a
DB connection in `SiteSettingExtension#process_message`. That happens
concurrently and a test that requires a connection to the db will
fail when the reconnection is happening.
Before this patch, a high trust level user could flag something
and have an action be taken, as well as skipping the flag queue.
Now, if a TL3/TL4 cause an action, the flag will skip the minimum
visibility check and allow staff to review it.
This allows fidelity in controlling excerpt (text that shows up when you pin a topic or link to it externally):
```
I am some text
[excerpt]
This is some **custom** markdown that should be the excerpt
[/excerpt]
More text
```
Previous solution relied on DIVs, unfortunately DIVs do not play well,
by design with mixing markdown unless you have a preceding newline eg:
```
<div class='hello'>
this will be treated properly as markdown
</div>
```
This extra newline is not desirable.
I am also considering adding
```
[div class=excerpt]
[/div]
```
This would offer lots of flexibility to themes and plugins that do not want the extra annoying newline.
As per the documentation for KEYS
```
Warning: consider KEYS as a command that should only be used in production environments with extreme care. It may ruin performance when it is executed against large databases. This command is intended for debugging and special operations, such as changing your keyspace layout.
```
Instead SCAN
```
Since these commands allow for incremental iteration, returning only a small number of elements per call, they can be used in production without the downside of commands like KEYS or SMEMBERS that may block the server for a long time (even several seconds) when called against big collections of keys or elements.
```
This generates a 10x10 PNG thumbnail for each lightboxed image.
If Image Lazy Loading is enabled (IntersectionObserver API) then
we'll load the low res version when offscreen. As the image scrolls
in we'll swap it for the high res version.
We use a WeakMap to track the old image attributes. It's much less
memory than storing them as `data-*` attributes and swapping them
back and forth all the time.
`SiteSerializer#is_readonly` is cached for an anonymous user so we have
to clear the cache when disabling readonly mode. Otherwise, the site may
appear to be in readonly mode for an extended period of time.
Historically due to https://meta.discourse.org/t/why-is-discourse-so-slow-on-android/8823
we decreased page sizes of both home page and topic page on android by half.
This was done on the server side and as a side effect and caused page sizes on android
to mismatch between Android and non Android.
Unfortunately about a year ago googlebot started pretending it is Android,
this cause Google to start indexing pages as what android would see. So
it saw double the amount of pages in the index as what exists on desktop.
This in turn caused double the amount of indexing work and a large amount
of broken links on long topics.
This fix removes all special behavior which is no longer needed due to
other performance work in Discourse including raw handlebars on home page
and virtual dom on topic pages.
I tested we do not need this on Blu Advance 5.0 it has 1.3 GHZ mediatec mt6580
This phone retails for around $50 USD.
If we decide long term that we want any hacks like this we will shift them
to the client side. It can just hold data in memory without rendering.
Some URLs in browsers are non compliant and contain twos `#` this commit adds
special handling for this edge case by auto encoding any fragments containing `#`
Previously users could control excerpt with `<span class='excerpt'>`
in Markdown, this is somewhat limited for plugins that need to define this
across a section. This adds support for DIV as well
Also added some helpful functionality for plugin developers:
- Raises RuntimeException if the auth provider has been registered too late
- Logs use of deprecated parameters
* FEATURE: allow plugins and themes to extend the default CSP
For plugins:
```
extend_content_security_policy(
script_src: ['https://domain.com/script.js', 'https://your-cdn.com/'],
style_src: ['https://domain.com/style.css']
)
```
For themes and components:
```
extend_content_security_policy:
type: list
default: "script_src:https://domain.com/|style_src:https://domain.com"
```
* clear CSP base url before each test
we have a test that stubs `Rails.env.development?` to true
* Only allow extending directives that core includes, for now
Changes to functionality
- Removed syncing of user metadata including gender, location etc.
These are no longer available to standard Facebook applications.
- Removed the remote 'revoke' functionality. No other providers have
it, and it does not appear to be standard practice in other apps.
- The 'facebook_no_email' event is no longer logged. The system can
cope fine with a missing email address.
Data is migrated to the new user_associated_accounts table.
facebook_user_infos can be dropped once we are confident the data has
been migrated successfully.
A generic implementation of Auth::Authenticator which stores data in the
new UserAssociatedAccount model. This should help significantly reduce the duplicated
logic across different auth providers.
Previously, the site setting was only effective on the client side of
things. Once the site setting was been reached, all oneboxes are not
rendered. This commit changes it such that the site setting is respected
both on the client and server side. The first N oneboxes are rendered and
once the limit has been reached, subsequent oneboxes will not be
rendered.
* Add missing icons to set
* Revert FA5 revert
This reverts commit 42572ff
* use new SVG syntax in locales
* Noscript page changes (remove login button, center "powered by" footer text)
* Cast wider net for SVG icons in settings
- include any _icon setting for SVG registry (offers better support for plugin settings)
- let themes store multiple pipe-delimited icons in a setting
- also replaces broken onebox image icon with SVG reference in cooked post processor
* interpolate icons in locales
* Fix composer whisper icon alignment
* Add support for stacked icons
* SECURITY: enforce hostname to match discourse hostname
This ensures that the hostname rails uses for various helpers always matches
the Discourse hostname
* load SVG sprite with pre-initializers
* FIX: enable caching on SVG sprites
* PERF: use JSONP for SVG sprites so they are served from CDN
This avoids needing to deal with CORS for loading of the SVG
Note, added the svg- prefix to the filename so we can quickly tell in
dev tools what the file is
* Add missing SVG sprite JSONP script to CSP
* Upgrade to FA 5.5.0
* Add support for all FA4.7 icons
- adds complete frontend and backend for renamed FA4.7 icons
- improves performance of SvgSprite.bundle and SvgSprite.all_icons
* Fix group avatar flair preview
- adds an endpoint at /svg-sprites/search/:keyword
- adds frontend ajax call that pulls icon in avatar flair preview even when it is not in subset
* Remove FA 4.7 font files
We were looking up each mention one by one without any form of caching and that results
in a problem somewhat similar to an N+1. When we have to do alot of DB
lookups, it also increased the time spent in the V8 context which may
eventually lead to a timeout. The change here makes it such that mention lookups only does a single
DB query per post that happens outside of the V8 context.
* First take on subsetting svg icons
* FontAwesome 5 svg subset WIP
* Include icons from plugins/badges into svg sprite subset
* add svg icon support to themes
* Add spec for SvgSprite
* Misc. SVG icon fixes
* Use FA5 svgs in local-dates plugin
* CSS adjustments, fix SVG icons in group flair
* Use SVG icons in poll plugin
* Add SVG icons to /wizard
Previously the related PMs were last meaning you would have to work through
all unread to see them.
Also amends it so it either asks for related by group OR user not both.
4481836 introduced accent stipping in search_indexer,
but we need to strip it from the query itself as well
TODO in search with diacritics:
- Still need to fix excerpts on search page
- need to support accent stripping in in_topic search
- need to make sure that in:title works correctly
- need to fix "word boldening" in titles
* Enable user email PM when posting to group or replying to topic via email
* remove extra line
* Add test and fix snake_case
* Only reenable email_private_messages for PM replies
* FEATURE: add branch option to remote theme import
* FIX: Add missing variable in params
* FIX: Add missing param for import_theme method
* SPEC: Add test methods for branch support in git import
* FIX: Add missing space to scss style
* Do not assume default branch as master
* Change branch field placeholder
* FIX: add missing div start tag
This moves us away from the delayed drops pattern which
was problematic on two counts. First, it uses a hardcoded "delay for"
duration which may be too short for certain deployment strategies.
Second, delayed drop doesn't ensure that it only runs after
the latest application code has been deployed. If the migration runs
and the application code fails to deploy, running the migration after
"delay for" has been met will cause the application to blow up.
The new strategy allows post deployment migrations to be skipped if the
env `SKIP_POST_DEPLOYMENT_MIGRATIONS` is provided.
```
SKIP_POST_DEPLOYMENT_MIGRATIONS=1 rake db:migrate
-> deploy app servers
SKIP_POST_DEPLOYMENT_MIGRATIONS=0 rake db:migrate
```
To aid with the generation of a post deployment migration, a generator
has been added. Simply run `rails generate post_migration`.
- By default, behaviour is not changed: tags are made lowercase upon creation and edit.
- If force_lowercase_tags is disabled, then mixed case tags are allowed.
- Tags must remain case-insensitively unique. This is enforced by ActiveRecord and Postgres.
- A migration is added to provide a `UNIQUE` index on `lower(name)`. Migration includes a safety to correct any current tags that do not meet the criteria.
- A `where_name` scope is added to `models/tag.rb`, to allow easy case-insensitive lookups. This is used instead of `Tag.where(name: "blah")`.
- URLs remain lowercase. Mixed case URLs are functional, but have the lowercase equivalent as the canonical.
* FEATURE: add indication if incoming email attachment was rejected and inform sender about it
* include errors for rejected attachments in email
* don't send warning email to staged users
* use user object instead of user_id in add_attachments method
A user editing a post will no longer get composer messages that are
meant for new users posting replies and threads. These messages don't
make sense in an edit context at all -- they're usually discussing
making salient replies or topics, or adding avatars. They make even less
sense when a user is an admin attempting to change the default topics
for the first time.
Since these messages actually do make sense for a user when they have a
low post count, though, they're still going to occur. They just occur
when a user is creating new content (and thus, more likely to read the
notice), not during edits.
This is in response to this issue:
https://meta.discourse.org/t/education-message-for-editing-wiki-topic/66682
When creating lightboxes we will attempt to create 1.5x and 2x thumbnails
for retina screens, this can be controlled with a new hidden site setting
called responsice_post_image_sizes, if you wish to create 3x images run
SiteSetting.responsive_post_image_sizes = "1|1.5|2|3"
The default should be good for most of the setups as it balances filesize
with quality. 3x thumbs can get big.
If we detect redis is in readonly we can not correctly get a mutex
raise an exception to notify caller
When getting optimized images avoid the distributed mutex unless
for some reason it is the first call and we need to generate a thumb
In redis readonly no thumbnails will be generated
previously admin got a free pass and could set theme via cookie to anything
including themes that are not selectable
this refactor ensures that only "preview" gets a free pass, all the rest
goes through the same pipeline
* When an error is raised when checking route constraints, we
can only return true/false which either lets the request
through or return a 404 error. Therefore, we just skip
rate limiting here and let the controller handle the
rate limiting.
If sidekiq is paused or Discourse is in readonly continue to queue
heartbeats
If we do not do that then a master process can end up reaping sidekiq
workers and causing various badness
This also impacts restore which can do weird stuff TM in cases like this
These site settings are very hard to explain and only applicable for very
specific Discourse setups.
If an admin "enables staged users" which is used in support scenarios then
all staff can send "messages" directly to an "email".
The setting allows you to extend this to TL4 or any trust level.
Actual use case would be a support type setup with restricted staff. It is
quite rare so hiding this for now and re-evaluate keeping the setting in
2019
* FIX: don't allow inviting more than `max_allowed_message_recipients` setting allows
* add specs for guardian
* user preferences for auto track shouldn't be applicable to PMs (it auto watches on visit)
Execlude PMs from "Automatically track topics I enter..." and "When I post in a topic, set that topic to..." user preferences
* groups take only 1 slot in PM
* just return if topic is a PM
At the moment core providers are hard-coded in Javascript, and plugin providers get added to the JS payload at compile time. This refactor means that we only ship enabled providers to the client.
* drafts in user profile: only show to user herself (not to admins), use avatar replying to (instead of topic OP), add keyboard shortcut for drafts, simplify display labels
* use JSON when testing Draft.stream
* add drafts.json endpoint, user profile tab with drafts stream
* improve drafts stream display in user profile
* truncate excerpts in drafts list, better handling for resume draft action
* improve draft stream SQL query, add rspec tests
* if composer is open, quietly close it when user opens another draft from drafts stream; load PM draft only when user is in /u/username/messages (instead of /u/username)
* cleanup
* linting fixes
* apply prettier styling to modified files
* add client tests for drafts, includes a fixture for drafts.json
* improvements to code following review
* refresh drafts route when user deletes a draft open in the composer while being in the drafts route; minor prettier scss fix
* added more spec tests, deleted an acceptance test for removing drafts that was too finicky, formatting and code style fixes, added appEvent for draft:destroyed
* prettier, eslint fixes
* use "username_lower" from users table, added error handling for rejected promises
* adds guardian spec for can_see_drafts, adds improvements following code review
* move DraftsController spec to its own file
* fix failing drafts qunit test, use getOwner instead of deprecated this.container
* limit test fixture for draft.json testing to new_topic request only
It was a dropdown to provide choices of color schemes,
and only one scheme could be shown.
With this commit, multiple color scheme previews can be displayed on
one page at the same time, making admins choose color schemes more
easily.
Theme preview windows are shrinked.
Imported default color schemes.
Co-Authored-By: Misaka 0x4e21 <misaka4e21@gmail.com>
* Phase 0 for user-selectable theme components
- Drops `key` column from the `themes` table
- Drops `theme_key` column from the `user_options` table
- Adds `theme_ids` (array of ints default []) column to the `user_options` table and migrates data from `theme_key` to the new column.
- Removes the `default_theme_key` site setting and adds `default_theme_id` instead.
- Replaces `theme_key` cookie with a new one called `theme_ids`
- no longer need Theme.settings_for_client
* Add possibility to add hidden posts with PostCreator
* FEATURE: Create hidden posts for received spam emails
Spamchecker usually have 3 results: HAM, SPAM and PROBABLY_SPAM
SPAM gets usually directly rejected and needs no further handling.
HAM is good message and usually gets passed unmodified.
PROBABLY_SPAM gets an additional header to allow further processing.
This change addes processing capabilities for such headers and marks
new posts created as hidden when received via email.
A previous shortcut used was not allowing for <abbr and other tags starting with a
If <abbr> appeared anywhere in the text all mentions would fail to link
This refinement of previous fix moves the crawler blocking into
anonymous cache
This ensures we never poison the cache incorrectly when blocking crawlers
I know that **Naming is CRITICAL** and that **Refactoring only NOT welcome**.
But since I spotted this (consistent) typo and the change does not affect any
functionality -- I checked the presence of "asscoiated" in the code base, I
guess the first rule trumps the second one.
It also gave me a false pretext to bypass my reluctance to use Google forms and
sign de CLA. Typos hurt the eye.
The logic is too hairy and we can't reliably determine
when to force summary mode. Work is underway to improve
perf for megatopics so this will not be required
eventually.
